TRT Trailers

TRI & QUAD LOW LOADERS MID TIPPING DECK LOW LOADERS • M aximises Loading of Multiple Roading Plant • 12tonne loaded through Mid Deck allows full trailer capacity • P aver Style Ramp for lowest load angle • Steering Options

DECK WIDENING LOW LOADERS • • • •

ri or Quad Axle T .5m to 3.5m wide 2 Extra deep crossmembers Single & Double Fold Ramp Options

AXLE WIDENING LOW LOADERS • • • • •

ri or Quad Axle T TIDD® Double Acting Hydraulic Suspension Axles lift independently Deep Coaming Rail for minimal deflection Steer Axle Options Maximise Traction. Combine with our Unique Dolly for the best load sharing in the industry.

HOUSE TRAILERS • D eck Heights from 750mm lowered to 2900mm raised • Decks extend from 10m to 22m • 2.5m to 3m wide options • Hydraulic Suspension • Axles lift independently • Steering Axle Options F2216B14

TRT (AUST) PTY. LTD. Phone: 1 800 802 912

Mobile: 0438 928 951

www.tiddrosstodd.com Email: bcarden@trt.co.nz Email: gharnett@trt.co.nz

ROWS OF 8 & PLATFORMS ROWS OF 8 LOW LOADERS 3x8, 4x8, 5x8 • • • • • • • •

rade 80 Hi-Tensile Steel Construction G Deep Chassis and Coaming for minimal deflection TIDD® Double Acting Hydraulic Suspension Independent Axle Lift Compensating ‘Live’ Gooseneck Heavy Duty BPW R08 Axles N o Deck Locks required Steering Options available

2 x 8 DOLLY • TIDD® Walking Beam Suspension • 5th Wheel Slider to optimise Axle Loading • Widens to 4.3m without raising the wheels

MULTI LINE PLATFORMS • • • • • • • • • •

onstructed in Grade 80 Hi-Tensile Steel C Pre-cambered Torsional Box Centre Spine Compensating “Live” Gooseneck Heavy Duty BPW 17.5” Axles ll axles capable of steering A Deep Coaming Rail for minimal deflection TIDD® Double Acting Hydraulic Suspension EAC Spherical Suspension Pivot Bearing Ramp & Clip On Module Provisions Designed to steer both forwards and backwards

TRT (AUST) PTY. LTD. Phone: 1 800 802 912

Mobile: 0438 928 951

Note how straight the trailer is loaded with 109 tonne.

www.tiddrosstodd.com Email: bcarden@trt.co.nz Email: gharnett@trt.co.nz

MULTI PURPOSE MID TIPPING DECK LOW LOADERS Designed specifically for the Roading Industry and for transporting of Access Equipment and other “hard to load plant�. Built with a 42 Tonne ATM Rating, a true low loader.

Tare weights from as low as 8,950Kg with double fold ramps are achieved using bisalloy 80 grade steel. This method of construction allows this trailer to carry one single piece of equipment (excavator) up to 29Tonne under permit.

The hydraulic Mid-Tipping deck allows rollers and access equipment to be easily loaded onto the top deck. The Mid-Tipping deck angles allow even 19 Foot electric scissor lifts to be loaded without bellying. 12Tonne can be placed on the Mid-Tipping deck when raised in travel mode.

TRT (AUST) PTY. LTD. Phone: 1 800 802 912

Fax: 1 800 555 975

www.tiddrosstodd.com Email: bcarden@trt.co.nz

Our special “Paver” ramps offer loading angles of only 6˚.

The Deck Widening Trailer shown below, built for Nationwide Transport, of Dandenong Vic, has a special curved Beavertail.

This was designed specifically to carry those hard to load stock picker fork trucks with little ground clearance. The radiused Beavertail eliminates the apex point , where the fork truck gets hung up on a conventional design trailer.

Mid-Tipping deck elevated to allow the SUV to load to the top deck. This trailer is also spec’ed with an optional 15,000lb hydraulic winch and remote control. Note the extremely low angle of the the extended bi-fold ramps and curved Beavertail onto the main deck.

Shown with SUV now in position on the top deck, and the main decks closed up to 2.5M. All decks and ramps on this trailer have our Cold Grip Non slip coating, which allows both rubber tyred vehicles and smooth drum rollers to be loaded.

The top two pictures show the operator using the trailer’s ramp and widening controls. Ramps are folded up, and trailer main deck is being closed up.

TRT (AUST) PTY. LTD. Phone: 1 800 802 912

Fax: 1 800 555 975

www.tiddrosstodd.com Email: bcarden@trt.co.nz

AXLE WIDENING LOWLOADERS Hi Tensile Bis80 construction produces light tare weights with good payload characteristics. Note the minimal deflection of the coaming rail, loaded with a 50T excavator. Tares range from 9.5 (Tri) to 14.5 Tonne (Steering quad).

Fitted with TIDD Trailing Arm hydraulic suspension allows this trailer to be both lowered or raised. Lowering improves loading angles, while raising above normal ride height increases ground clearance. TRT’s unique Hydraulic suspension uses double acting cylinders that allow over 200mm of axle travel.

With lock valves fitted the operator can lift an axle row at the touch of a lever. Normal operation has all tyres on the ground, but when running empty one or more axles can be lifted provided at least two axle rows remain in contact with the road. Tyre change or puncture repair can be effected without having to use a jack, simply lift the tyre that needs changing.

The 50 Tonne combination built for Olsson Heavy Haulage of Gippsland VIC. pictured below is fitted with two BPW LL Series steer axles at the rear. The photo highlights how our low profile design gooseneck permits equipment like this Striker SC185 Tracked Screen to be loaded as far forward as possible.

TRT (AUST) PTY. LTD. Australia: 1 800 802 912

www.tiddrosstodd.com

New Zealand: 07 849 4839

Email: bcarden@trt.co.nz

Built at either close or spaced axles out to 1.8M centres (for maximum payload load) this range of trailers use either air or hydraulic suspension.

Spread to 3.5M wide these decks are shown fitted with conveyor belt.

Typical low Beavertail angle allows ease of loading over the apex.

Optional Double fold ramps.

4 x 2 Dolly supplied on either air or mechanical suspension allows 50/50 axle weight splits, tare from as low as 3,200Kg. Top deck access is achieved with pull out alloy ramps.

TIDD ROSS TODD LIMITED New Zealand: 07 849 4839 Australia: 1 800 802 912

www.trt.co.nz Email: bcarden@trt.co.nz

HEAVY DUTY SWINGWING ROWS OF 8 Built at either 2.5 or 2.7M closed widths, these trailers open out to 4.3M wide. The 2 x 8 Dolly widens from 2.5 to 4.3M and is built with an Air Pinned 600mm Sliding 5th Wheel to maintain optimum axle loads.

This Sherrin Equipment 3 Rows of 8 is shown undergoing final tests prior to delivery. The 380mm deep Pressed Coaming Rail ensures minimal deflection even fully loaded.

Pictured hauling a 67 Tonne D10, this 4 Rows of 8 and 2 x 8 Dolly combination built for Telstra Australia is fitted with our Full Hydraulic Compensating Gooseneck, that automatically changes angle with the terrain, maintaining a constant load on the Prime Mover’s drive tyres. Telstra chose this feature as it allows them to haul through “jump ups” without breaking traction.

TRT (AUST) PTY. LTD. Australia: 1 800 802 912

www.tiddrosstodd.com

New Zealand: 07 849 4839

Email: bcarden@trt.co.nz

This 5 rows of 8 shows the additional sliding box member which allows maximum overlap when fully widened to keep the trailer straight.

The Hydraulic Gooseneck allows the operator to lift the front of the trailer for additional ground clearance. In travel mode the Gooseneck automatically compensates for the terrain as the pre-charged accumulator applies a constant load, maintaining traction on the Drive Tyres.

As an option you can select our unique Hydro-Gas Suspension for a soft ride and extended trailer life.

Brake Boosters travel with the axle to minimise linkages, optimise brake geometry and increase component life.

Beavertails are built to provide shallow loading angles.

Talk to our Sales & Design Team. They will work with you to provide the best engineered solution for your specific application.

TIDD ROSS TODD LIMITED

www.trt.co.nz

New Zealand: 07 802 849 912 4839 New Australia: 1 800 bcarden@trt.co.nz Australia: 1 800 Zealand: 07802 849912 4839 Email: Email: bcarden@trt.co.nz

HOUSE REMOVAL TRAILERS ADAPTABLE Built for KirkPatrick of USA, this trailer extends out to take a 20M Building. Built with TRT’s unique Poly Beam & Torsional Box Trombone for a 40% improvement in stiffness over standard I Beam designs. With a lowered deck height of 900mm, raised deck height for this unit is 2,850mm. Other configuration trailers can achieve lowered deck heights from 750mm and a raised deck height from 1,650mm.

FLEXIBLE The split axle fully independent suspension allows the lifting of any wheel set, giving the operator the flexibility to ‘step over ‘ obstacles, as shown on this trailer built for Davie Shoring and Moving USA. Designed to cope with difficult terrain on site, the whole trailer can be ‘leant’ on one side like this Craig Walker trailer, which enables trailer and load to negotiate a steep siding or to clear a bridge rail.

Configuration 1.8 Mtr axle spacing 2.4 Mtr axle spacing SUPER LOW

Lowered Deck Height

Raised Deck Height

900mm

2,150mm

900mm

2,850mm

750 rear 500mm front

1,650mm

TRT (AUST) PTY. LTD. Australia: 1 800 802 912

www.tiddrosstodd.com

New Zealand: 07 849 4839

Email: bcarden@trt.co.nz

MANOEUVRABLE Utilising BPW Steer axles converted by TRT to full hydraulic split axle power steer, provides 3 steering modes, castor steer, float steer, or hydraulically locked ‘straight ahead’. Individual axle power steering is by Radio Remote. A LED indicator is fitted to show the driver when the axle is in the straight-ahead position.

TESTED Prior to shipment and delivery, we test the fully independent suspension to ensure it operates through its wide range of movements. During road testing the steer axles are checked for response times and wheel alignment, both loaded and unloaded.

OPTIONS Sideshift: Fitment of 3 sets of side shift legs will allow a 30T building to be moved 600mm sideways, ideal when splitting or joining a building.

Clip On: Extra capability can be added by attaching clip on modules to increase the number of axle lines.

King Pin Side Shift: Fitted to skid plate and operated via a compact double acting cylinder, this fitment allows very precise sideways movement to align the building on each pile. Makes high setting a building a breeze.

TIDD ROSS TODD LIMITED New Zealand: 07 849 4839

Australia: 1 800 802 912

www.trt.co.nz Email: bcarden@trt.co.nz

HYDRAULIC HOUSE JACKING PLANT • 4t SWL capacity at 1.4m lift • Single & Double acting designs • Easy & quick to install or dismantle • Designed for safe lift or lower of building • Portable powerpack controls all jacks

TRT (AUST) PTY. LTD. Australia: 1 800 802 912

www.tiddrosstodd.com

New Zealand: 07 849 4839

Email: bcarden@trt.co.nz Email: gharnett@trt.co.nz

MOBILE JACKING SYSTEM • Self-contained Trailer System • Haul to site by truck or utility • In-deck rollers for easy load & unload of jacks • Jack Barrows for safer deployment • Integrated storage for all hoses and equipment • Jack extensions for higher lift capabilities

F1017C14

TRT (AUST) PTY. LTD. Australia: 1 800 802 912

www.tiddrosstodd.com

New Zealand: 07 849 4839

Email: bcarden@trt.co.nz Email: gharnett@trt.co.nz

CRANE SUPPORT TRAILERS Today’s mobile cranes have become much larger and more sophisticated as evidenced by NZ Crane Hire’s Grove GMK 6300.

One of the largest hydraulic cranes ever seen in New Zealand this Mercedes-Benz powered (420Kw) 6 wheel drive, 12 wheel steer crane weighs in at around 66 Tonne. With 100 Tonne of counterweight fitted, the crane is rated at 300 Tonne. The main boom extends up to 63 Metre tip height; the Lattice Fly Jib takes this up to 113 Metres.

Transporting 100 Tonne of crane counterweight and 50 Metres of Lattice Fly Jib safely and securely demands you either employ a fleet of flat deck semi trailers and live with the cord damage from chains and dogs, or you invest in TRT Crane Support Trailers, the efficient and effective way to support your crane feet. Three 6 axle Grove All Terrain Cranes shown here lifting the 130 Tonne ex Americas Cup yacht “Endeavour”. All 3 cranes use specially designed TRT Crane Support Trailers to deliver counterweight, Jib sections, swamp pads and extra lifting equipment to the crane work site.

TIDD ROSS TODD LIMITED New Zealand: 07 849 4839

Australia: 1 800 802 912

www.trt.co.nz Email: bcarden@trt.co.nz

CUSTOM DESIGNED TRAILERS Purpose built to suit your crane fleet.

• • • • •

Lock Counter Weight Securely Transport boom sections or jibs without cord damage.

Minimise Chains.

Tri Axle Semis from 4850Kg. Mini B Double skel set, tare as low as 5950Kg, fully decked from 7800Kg.

• Range of Boom Dolly trailers available

TRT (AUST) PTY. LTD. Australia: 1 800 802 912

www.tiddrosstodd.com

New Zealand: 07 849 4839

Email: bcarden@trt.co.nz