HOW TO REPAIR SMART LOCK SLIDING DOOR!

How To Repair Smart Lock Sliding Door! dvslocksmith.com/2022/04/22/how-to-repair-smart-lock-sliding-door

Sliding glass doors provide a more open feel to a home’s entrance. They provide you with a clear view of the backyard, patio, or playground area. Opening a wooden door to search outside the house allows parents to observe youngsters at play much more comfortably.

Although those doors are convenient, your smart lock sliding door will need to be cleaned, lubricated, and adjusted from time to time to keep them secure. Call a Lock repair and replacement in Hillside for cleaning and repairing your sliding doors.

Even with all attention, they may break or stop functioning, demanding maintenance. It’s conceivable that the procedure will differ. As a result, it’s crucial to keep in mind that we’re working with glass here.

How to Repair Smart Lock Sliding Door 1. Turn the round door lock on the inside of the sliding glass door jamb to open the door.

2. Depress the pressurized air can’s trigger. Direct the jet into the edge of the door’s lock. In a smart lock sliding door lock, dirt, debris, or foreign objects can prohibit the moveable latch from moving. You will remove any debris by spraying the lock with high-pressure air.

3. You should spray a substantial amount of aerosol lubricant on the closing door at the sliding glass door’s edge. Allow a minute for the lubricating spray to dry before re-spraying the latch.

4. Turn the locking knob right and left to see how the door closes. The lubricating spray allows the latch to retract fluidly into the doorjamb and lock.

5. With a tiny flat screwdriver, loosen the lock plate screws in the door jamb by rotating them counterclockwise. The sealing plate in your chamber swings up and down when the screws are released.

6. Close the door nearly all the way and check the lock level on the latch.

7. Move the strike plate lock up or down to accept the lock in the strike plate’s center.

8. The plate retention latches in place and tightens all screws clockwise with one hand.

9. The sliding glass door should be closed. To test the repairs, turn the knob to the lock position and try to pull the door open. When the door is in a locked position, it should not open.

What Things Are Required For Replacing The Sliding Door Lock If you have the correct equipment, changing the smart lock sliding door lock will be easier. You don’t have to be concerned because these products can be found in your home or purchased at a local hardware store.

New Lock

1/3

When selecting a replacement lock, double-check that it will fit your sliding door by measuring both the door and the old lock. However, look for a lock with an inside handle and an outer pull with a key cylinder for added ease. A mortise lock and a thumb latch are also required.

Choose a lock that can be fitted on the type of door you have, as certain locks are only compatible with certain types of doors. Ensure the lock comes with mounting screws, so you don’t have to seek them during installation.

Screwdriver The type of screws determines the screwdriver you’ll need in your lock. A Phillips screwdriver is required if the screw head is cross-shaped. Phillips screwdrivers come in various sizes, so choose one that will exactly fit the screws. It may damage the screws if it is too large. It would be difficult to tighten the screws if they were too small.

Lubricant To clean the lock, you’ll need lubricant. Cleaning a lock often restores its functionality. To clean the dust from the lock mechanism, use WD-40. It is also safe to use on steel and aluminum. If you don’t have any WD-40 on hand, you can substitute any other penetrating lubricant.

If you don’t have any other lubricants, you can clean the lock with oil as an option.

What To do With a Sliding Glass Door Lock : Check if the lock needs cleaning or maintenance Check the lock needs to be replaced or only cleaned before you start dislodging it.

However, Pour lubricant inside the lock and run the pencil across your key before inserting it. If the lock still does not function after cleaning it, you will need to purchase a new lock to replace the old one.

Unscrew the screws on the lock's handle to remove it To select an appropriate lock for your smart lock sliding door, remove the screws from the handle and the lock. Get the measurements of the lock and the door after that. It would be best to give these measurements to the hardware store where you will purchase the lock.

Measurement will keep you from purchasing the incorrect one.

Install the new lock Replace the old lock in the same area where the old one was. Using a screwdriver, insert the screws through the holes and tighten them. After that, close and open the door to see if the lock is operating properly. When your installing door lock does not work properly, call Rekey lock in schiller park for installing new sliding door locks.

2/3

Conclusion Sliding glass door lock replacement is simple if you follow the procedures above. You can save your money and learn a skill that will come in handy if your lock breaks. You can also repair your door locks properly.

3/3