How To Open A Master Lock Without The Combination

How To Open A Master Lock Without The Combination singinnews.com/how-to-open-a-master-lock-without-the-combination

Lockers at school, work, the gym, and shed doors and equipment chests are secured with master combination locks. You have a couple of options if you forget the combination and can’t find the information sheet to open a master lock without the combination. Rekey lock in Chicago provides fast and best services for opening the master lock.

Different steps for opening a master lock without the combination Step 1: Spin the zero past the indicator arrow three times in a clockwise direction on the Master lock’s numbered dial. Leave the zero under the arrow on the fourth pass. Pull the shackle clasp up, causing the dial to stick and be difficult to shift. While pulling the shackle clasp up, turn the dial clockwise until it comes to a halt and will not spin any further. However, The dial will become stuck after three or four consecutive numbers, and you will no longer be able to move it. Take note of the number that is now under the arrow.

Step 2: Remove the shackle from the shackle clasp. Pull the shackle clasp back up and counterclockwise rotate the dial until it stops. The range of the third number or last digit of your combination is the distance between the first clockwise spin stopping point number and the second counterclockwise spin stopping point number.

Step 3: 1/3

On the top line of your scrap paper, write “third number range.” If the range consists of two consecutive numbers, record the number in the middle, which will be the lower of the two values, followed by a 1/2. If the dial pauses between 3 and 4, write “3.5” or “3 1/2” on scratch paper. If they’re two numbers apart, such as 29 and 31, write down the center number, which is 30.

Step 4: To go past the dial’s stopping point, release the shackle clasp. Three times past zero, spin the dial clockwise and stop on the zero on your fourth revolution. Write down the counterclockwise spin halting point range and the clockwise spin stopping point range.

Repeat this method until your range of numbers reaches zero at the other end of the dial.

At this point, you should have a list of 12 range numbers.

Step 5: Examine your 12-number list. Any number that ends in a 0.5 or 1/2 should be crossed out because numbers aren’t part of your combination. Take a look at the numbers in the remaining ranges. Four of the numbers will conclude with the same number in their single-digit or one’s column. Moreover, you should also cross these numbers off because they aren’t part of your combination. The third number in your combo is the last one. On the very top of your page, write “combination third number” and the number you just figured out through elimination.

Step 6: On a new line, write “second number range” below “third number range.” After dividing the third number by four, write the remainder next to the possible first number. The remaining will be one of the following: zero, one, two, or three. To get the remaining number, multiply it by four. Make a note of this number. Continue adding four and write the number down until you reach zero after going around the dial.w

Step 7: Examine the available second numbers and mark any plus two numbers away from the third combination number with an X. Mark any minus two from the combination’s third number with an X. The second number in your combo is the remaining number. Write “second combination number” at the top of the paper, followed by the number you came up with.

Step 8: You should determine the first number in your combo. The combo can be timeconsuming and difficult. Please write down the second number after adding 2 to it. Write down the second number after adding 6 to it. You should not use these two integers to determine the first number in your combination.

Step 9: 2/3

Begin by going through the numbers on the dial one by one until you reach the first number of your combination. Please dial the first number that is not two or six times the second number, then spin the dial counterclockwise past zero to the second number, and then clockwise past zero to the third number.

Step 10: As you try to find the first number, keep moving through the numbers on the dial in order, avoiding the numbers two or six more than the second number. However, when you’ve figured out the first number in the combination, write it down next to the “initial combination number” at the top of your paper.

Conclusion The durability of a standard master lock is relatively high. There are various ways to open a master lock without the combination. To accomplish so, you’ll need a lot of patience and experience. You need to call Rekey lock-in Elmwood park for proper guidance and the best service. Although it’s inconvenient to misplace your lock key, be careful not to repeat the mistake after you’ve opened it!

3/3