How to Change Batteries in Vivint Door Lock-dvslocksmith.com

How To Change Batteries In Vivint Door lock dvslocksmith.com/2022/06/14/how-to-change-batteries-in-vivint-door-lock

Vivint door lock is a security system that unlocks the door using a keypad or touchscreen.

The locks are commonly used in both homes and businesses, and they can add security and peace of mind. You can simply change the batteries in vivint door lock. Moreover, a Vivint lock’s battery is necessary since it powers the lock. However, the lock may not work properly if the battery is low or dead. As a result, it’s critical to replace the battery when it runs out in order to keep using your lock safely and securely.

Tools Needed: You’ll Need These Tools 1. Screwdriver with a flathead 2. Screwdriver with a Phillip’s head 3. Pliers with a needle nose 4. Strippers for wires 5. Your door lock’s battery has to be replaced.

6. With a keypad or a touchscreen, you can lock or unlock your door.

Procedure: You may also contact for lock repair and replacement in Elmwood park for professional and accurate help.

Step 01: Remove The Cover First Firstly, remove the cover from the door lock with a flathead screwdriver. You’ll be able to get to the battery this way. Before you replace the battery in your lock, there are a few things you should know. First, double-check that you have the replacement battery on hand. To finish the job, you’ll probably need a Phillips head screwdriver and needle-nose pliers. Finally, before changing the battery, remove the cover from the door lock to gain access to the battery compartment.

Step 02: Take The Lock Cover Off Firstly, it’s not difficult to remove the cover from a Vivint lock, although it can be a little complicated. There are a few screws to remove, and they can be difficult to reach.

However, to complete the task, you may require a Phillips head screwdriver and needlenose pliers. Before replacing the battery, make sure the lid is completely removed.

Step 03: Dispose Of The Previous Battery Thirdly, when replacing the batteries in vivint door lock, the first step is to remove the old battery. Using a flathead screwdriver to pry out the existing battery, you may do this quickly and efficiently. For added leverage, use needle-nose pliers if necessary. Then 1/3

gently remove any remaining adhesive fragments with the flathead screwdriver. A flathead screwdriver and needle-nose pliers are the best tools for removing an old battery.

To begin, pry out the old battery with the screwdriver. Then, with the pliers, scrape away any leftover adhesive. Make sure you don’t break your door lock in the process!

Battery Replacement

You’ll be able to see how the battery is connected to the door lock once you’ve removed it.

This step can be completed with wire strippers or scissors. To avoid damaging your lock, use extreme caution. Pull the battery out of your door lock after tugging on it to verify it is entirely separated. There’s one more thing you should know about replacing the batteries in your lock. When you acquire a new battery, make sure it’s connected correctly.

The positive and negative terminals on the battery must be facing the same direction otherwise the battery will not function properly.

Must Read: How To Install A Door Knob With Lock Step 04: Replace The Battery After that, it’s time to replace the batteries in your Vivint lock. To begin, open the package containing your replacement battery, which should include a small Phillips head screwdriver. Gently install the replacement battery into your lock with the screwdriver.

After you’ve put it in, use glue or a flathead screwdriver to secure it.

Before moving on to the following step, make sure the new battery is secure and wellplaced. Another thing to know about changing the batteries on a Vivint lock is how to connect it in the proper orientation. The battery’s positive and negative terminals must be facing the same way or it will not work properly.

Step 05: Reconnect All Of The Wires (Optional) Most importantly, the next step in changing the lock battery is to reconnect all of the wires that were previously disconnected. The instructions for reattaching these wires should come with your replacement battery. Use needle-nose pliers for more leverage if you’re stuck, and be careful not to tangle the wires as you tuck them back into place.

Learn more about how to repair auto door locks.

All wires should be reattached. When reattaching wires, be cautious; there is a risk of electric shock, so proceed with caution. Consult the instructions that came with your replacement battery if you’re not sure how to reconnect the connections. While working on the battery, be very careful not to contact the terminals, as this could result in a deadly shock.

If you experience a shock while reconnecting the cables, release the battery immediately.

Do not contact the battery terminals again, since this could result in another shock. If you feel threatened, please leave the area and seek assistance.

2/3

Step 06: Put Your Vivint lock To The Test Lastly, to unlock the door, use the keypad or the touchscreen. If the battery was correctly replaced, you should be able to enter your home without difficulty!

You may need to troubleshoot your Vivint lock if the test fails. The first thing you should do is double-check the connection between the battery and the charger. Make sure the connections are connected properly and the battery is in the proper position. If everything appears to be in order, replace the battery once more. If the problem persists, you may need to contact customer care for assistance.

What To Do If You Are Unable To Resolve The Issue On Your Own If you are unable to resolve the battery problem on your own, it may be necessary to seek professional assistance. To schedule a repair, contact your local locksmith or Vivint customer care. There are a few things you can take to try to resolve the issue on your own.

The first thing you should do is double-check the connection between the battery and the charger. Make sure the connections are connected properly and the battery is in the proper position. If everything appears to be in order, replace the battery once more.

If the problem persists, you may need to contact customer care for assistance.

Conclusion: Don’t panic if you’re experiencing difficulties replacing the batteries in your Vivint lock.

We’ve put together a step-by-step guide to assist you. You’ll be able to change the battery in no time if you follow these simple procedures. Thank you for taking the time to read our guide on how to change the batteries in vivint door lock.

Also Read: Professional Guide For Installing Z wave Door Lock

3/3