Glance At the Things You Should Know About Fitting and Turning Course

Glance At the Things You Should Know About Fitting and Turning Course

A mechanical fitter is a specialist in mechanical engineering. And the main task of a mechanical fitter is to repair, install, and maintain machinery and equipment for several industries. Aeronautical, manufacturing, mining, maritime, medical, and food processing industries are the main industry segments in which a mechanical fitter can work. Now if you are seeking your career as a mechanical fitter it is

needless to say that you will need to take admission in a mechanical fitting and turning course. So, before enrolling yourself in such a course it will be best for you to have a glance at the things which you should know about it.

The basic requirements for getting admission in the course For enrolling in the mechanical fitting and turning course you will require to pass minimum standard 9. Grade 9 is the minimum qualification which you have to have if you wish to learn this course. But if you have already complete grade 12 then you should know that you are going to get a good employment opportunity. You can also learn this course if you have a N2 technical qualification.

Course module In the mechanical fitting and turning course you will get a thorough introduction about the safety of fitting trade and fitting and turning trade in general. You will learn about the usage and application of mechanical engineering tools and equipment.

You will even get a broad knowledge about diagnostic techniques, lubrication and bearings, pneumatic and hydraulics, working principles, terminology and function of drivers, mechanical principles and applications of various types of gearboxes, clutches, brakes, and much more.

Let’s Infer So, this was something which you needed to know about the mechanical fitting and turning course. You can also opt for marine engineering study if you are an aspirant marine engineer.

Source Link: https://bit.ly/2Jeoo0Y