Building and Property Infrared Inspection Auckland

What Inspection Services Do DRYSCAN Offer?

At Dryscan, we offer a range of different services of Building Inspection Auckland to ensure your home is dry and safe. Our pre­purchase Report or pre­sale house inspections will ensure you end up in a family home that is healthy and happy rather than leaky, unsound and in need of expensive repairs.

•

Infrared Moisture Inspection

In many cases, moisture can be hidden within walls, slowly doing damage with no visible evidence to the naked eye. At Dryscan we use sophisticated infrared technology including NZ Standard moisture meters to detect moisture. Infrared technology uses the part of the light spectrum the human eye cannot see. These cameras are sensitive to the slightest variations in temperature and therefore have the ability to detect moisture hidden within walls.

•

Building Inspection

The words ‘leaky buildings’ and ‘moisture’ strike fear into many people. The response is often “No, I don’t have a problem. Its just the cold side of the house”.

But after 10000 inspections, we stopped counting. We had only seen 20 houses without any moisture issues. Not all that failed had serious issues but they still needed addressing before significant damage occurs. The moisture detectives at Dryscan can help diagnose where and what is affected and how bad it is. We use state of the art infrared technology to see into your walls and ceilings to show thermal anomalies and then track the moisture to its source.

Copyright © 2014 Dryscan Ltd ®. All Rights Reserved.

Bryce Hall of Dryscan knows only too well. He’s lived through a leaky home which put stress on his health, marriage, family and the joinery business. “When I saw this infrared technology, I knew that this would help a lot of people with leaks and moisture issues, or to help them avoid buying a leaky home.”

•

Track and Trace Inspection

Do you have a single or annoying leak that you can’t find the source of? You’ve had your builder, roofer and plumber look with no luck?

Call Dryscan and get a track and Trace Inspection and report. We will find the source of your leak or you do not have to pay.

•

Methamphetamine (P­Lab) Screening

If you have one reason to suspect a house might have been used as a P lab, don;t take any chances.

The chemical residue left behind can be seriously dire to you and your family’s health. At Dryscan, we offer screenings to detect drug contamination.

LEAK DETECTION: Water leaks can occur as a result of many factors such as: Floods from laundries, kitchens and bathrooms etc Rain leaks Roof leaks Cladding leaks Joinery Leaks Deck leaks Plumbing leaks Flooding rom outside Internal leaks

Copyright © 2014 Dryscan Ltd ®. All Rights Reserved.

WE’VE GOT YOU COVERED FOR: Moisture Ingress and Leak Detection Watertightness Reports Leaky Building Diagnostics Pre­Purchase Inspections Track and Trace Reports Heat Loss Inspection Pre­Sale Inspections Roof Inspections It is essential that leaks are not only stopped as soon as possible, but also that the affected areas are dried out once the cause of the leak has been found and repaired. Our dynamic team at Dryscan can safely and effectively dry out any affected areas.

HOW DOES THE DRYSCAN PROCESS WORK? A member of the Dryscan team will come to your house for a pre­puchase or pre­sale inspection and beign with an internal inspection of each room. We’ll check every wall and ceiling (where possible) including top and bottom plates using thermal imaging and a non­invasive moisture meter.

We will then do an external check focusing on areas where common problems occur such as roofs, decks, ballustrades, cladding, flashing and ground clearnace.

Following on from that we’ll hen provide a verbal report followed by a written report so that you can buy with confidence or sell with a good conscience. Best of all the results are instant so you;ll find out right away!

Copyright © 2014 Dryscan Ltd ®. All Rights Reserved.

WHY SHOULD YOU CHOOSE DRYSCAN? Customer Service: Dryscan delivers a professional yet friendly service where we’ve achieved some great results and feedback over the years Experience: We’re fully qualified with over 30 years industry experience Professional Indemnity Insurance: For diagnosing leaky buildings for your peace of mind.

Assurance: We stick to thorough processes and procedures and offer a 6 point guarantee so that you’ll know you’re getting a service you can count on.

The Best Equipment: At Dryscan we’ve sourced superior, high resolution, high performance cameras. This means a 45% higher performance than most traditional infrared detectors used.

Track & Trace Report: If we don’t find the source of the leak, you don’t have to pay

DANGERS OF NOT BOOKING A PROPERTY INSPECTION FROM DRYSCAN: You could find yourself living in a leaky home You could lose tens or hundreds of thousands of dollars of your investment Your house could be structurally unsound You and your family’s health could be compromised

Copyright © 2014 Dryscan Ltd ®. All Rights Reserved.

The foundation of DryScan began over ten years ago with a Drying Solutions company which specialised in the drying of timer framework in buildings prior to the pre­line building inspection.

This led to an awareness of the continued problem of moisture in both new and existing homes, and then with the explosion of the “leaky building syndrome”, the company founders identified the need for more detailed testing of the moisture damage occurring in specific areas.

Drybuild Infrared Solutions was formed to provide in­ depth, non­invasive moisture testing and reporting for buildings. Having thoroughly researched equipment and procedures and travelling internationally to test equipment and investigate moisture issues, a high­tech infrared thermal imaging process with comprehensive reporting procedures was established in New Zealand. Drybuild pioneered this leading edge technology in New Zealand and became the first building inspection company to adopt purpose built infrared thermal imaging for use in building inspections. (Some have since tried to emulate what Drybuild started, but the experience and cutting edge technology…)

Bryce Hall joined Drybuild in May 2008 working in Auckland and surrounding areas. In 2012 Bryce changed the company name toDryScan and has continued to build upon the experience and knowledge that was Drybuild’s foundation; synonymous with integrity, reliability, quality and service. DryScan still uses the most accurate hand­held infrared camera in New Zealand enabling it to see up to 45% more than most other infrared cameras being used currently.

To put it simply, DryScan does it best! Having developed the systems, software and technology, DryScan is ahead of the rest. We are passionate about what we do and you can rest assured and have peace of mind that you will have the expertise, knowledge and professionalism that is required when dealing with your largest asset.

Copyright © 2014 Dryscan Ltd ®. All Rights Reserved.

For More Detail:

www.dryscan.co.nz

Copyright © 2014 Dryscan Ltd ®. All Rights Reserved.