RePlant Implant System Catalog

Page 1

RePlant ® System Catalog

ReActive

RePlant ® Internal Tri-Lobe

RePlus ® Internal Tri-Lobe

ReActive ™ Internal Tri-Lobe


Ta b l e o f C o n t e n t s Page # Implant Design, Surface & Dimensions

1-2 3

RePlant Implants

4-5 6-7

ReActive Implants

Screw-Receiving, Ball & GPS™ Abutments

25 26-29

RePlant Surgical Sequence & Drills

Procedures for Contoured Abutments & Lab Alignment Tools

20 21-24

Surgical & Prosthetic Instruments

Selection Chart for Partially Edentulous Restorations

15-17 18-19

Procedures for Titanium FMT / Temporary Abutment

Selection Chart for Implant & Straight Abutment Components

13 14

Abutments for Partially Edentulous Restorations

RePlus & ReActive Fixture Mount Packaging

11 12

Straight Abutment & Ancillary Components

RePlus Implants

8-9 10

Healing Collars, Transfers, Analogs & Alignment Tools

Product Label Description

30-33

RePlus & ReActive Surgical Sequence & Drills


Implant Design and Surface

Mini-threads with Double-lead Threads for Faster Insertion The bodies of the RePlus and ReActive implants are tapered evenly from the top to facilitate insertion into an undersized socket in soft bone providing compression that increases initial stability (G. Niznick: Clinical Oral Health 2000 “Achieving Success in Soft Bone”). The RePlant implant is designed with a straight/tapered profile matching that of the NobelReplace Implant (Nobel Biocare). Mini-threads start 1.0mm below the crest of the bone and extend approximately 2.0mm before transitioning into double-lead threads to the apex of the implant. The mini-threads, half the depth and pitch of the double-lead body threads, reduce stress in the critical crestal bone region, while double-lead threads reduce the number of turns required to seat the implant. Vertical cutting grooves extend halfway up the implant from the apex for self-tapping insertion. All three implants are available with SBM textured surface over the entire implant and HA is an option for RePlus and ReActive. Standard “V” Thread

Standard “V” Thread

Quadruple Lead MiniThreads

Buttress Thread

0.3mm

All three Implant Direct Tri-Lobe implants have Mini-threads for reduced stress near the crest of bone, and double-lead threads on the body for 2X faster insertion

0.45mm

o

The 1.5 taper to the OD of the RePlus and ReActive Implants facilitate bone expansion for increased stability.

0.6mm

Double Lead Threads

1.5 Deg. OD Taper

1.5 Deg. OD Taper RePlant duplicates the body design of NobelReplace

0.85mm

1.5 Deg. ID Taper

RePlus features threads with the same 1.5o taper to the inside (ID) and outside (OD) thread diameters for optimum soft bone compression

3.0 Deg. ID Taper

1.5 Deg. OD Taper

ReActive offers greater thread engagement by tapering the inside thread diameter (ID) at 3o while the outside thread diameter (OD) tapers at 1.5o

SBM and HA Coated Surface Options SBM surface is created by using a Soluble Blast Media of Hydroxylapatite (HA) crystals to create a medium-rough texture. Implant Direct uses the same vendor for its SBM and HA coated surface treatments as used by Paragon Implant Company from 1992-2000 when these studies were conducted. SEM's of Implant Direct’s Surfaces Mini-threads textured by blasting with SBM™: Blasted with Soluble HA Particles HA Coating: High Crystalline 40u layer RePlus & ReActive Implants have an HA option. SBM Surface 20X

SBM Surface 50X

HA Surface 20X

HA Surface 50X

Animal Studies Bone Response to SBM Surface

1


Implant Design and Dimensions RePlus and ReActive Implants with NobelReplace Compatible Tri-Lobe Connection

3.5mmD Platform

4.3mmD Platform

5.0mmD Platform

0.3mm Supra-Crestal 1mm Unthreaded Collar 3.0mmL

4.0mmL

M1.8 Internal Thread

Implant Length (13mm)

M2.0 Internal Thread

SBM surface texture

3.7mmD RePlus

4.2mmD RePlus

4.7mmD RePlus

5.7mmD RePlus

3.1mmD Apex

3.6mmD Apex

4.1mmD Apex

5.1mmD Apex

RePlant Implants with NobelReplace Compatible Tri-Lobe Connection

3.5mmD Platform

4.3mmD Platform

5.0mmD Platform

6.0mmD Platform

1mm Unthreaded Collar 3.0mmL

5.8mmL

M1.8 Internal Thread

Implant Length (13mm)

4.0mmL

6.1mmL 6.5mmL

6.9mmL

M2.0 Internal Thread

SBM surface texture

2

3.5mmD RePlant

4.3mmD RePlant

5.0mmD RePlant

6.0mmD RePlant

2.6mmD Apex

2.7mmD Apex

3.1mmD Apex

3.7mmD Apex


P ro d u c t L a b e l i n g : D e f i n i t i o n s a n d D e s c r i p t i o n s

RePlant Implant Vial and Cap Label 11 1 2 60 = RePlant SBM 43 = 4.3mmD body diameter 13 = 13mmL body length

3

4 5

10

6

9

7

8

RePlant Prosthetic Vial and Cap Label 11 1 2 60 = RePlant prosthetics 43 = 4.3mmD platform diameter -21 = prosthetic specific code

3

6 11

7 12

8

9

1) Implant Direct products carry the CE mark and fulfill the requirements of the Medical Device Directive 93/42/EEC 2) Product code or reference number 3) Product description 4) Use before expiration date (XXXX-XX) 5) Gamma sterilization symbol 6) Single-use only symbol 7) Caution: US law restricts the sale of these devices by or on the order of a dentist or physician 8) Refer to Instructions For Use (IFU) 9) Lot number (XXXXXXXXXX) 10) Implant body diameter color reference on surgical tray 11) Implant prosthetic platform diameter (written and color-coded) 12) Non-sterile

3


R e P l a n t : Two - P i e c e I m p l a n t RePlant RePlant Two-Piece Implant System Featuring:

RePlant Packaging

• Straight/Tapered body design and dimensions match NobelReplace® Tapered Groovy implant allowing insertion with Nobel Biocare’s drills

Carrier/Transfer

• Tri-Lobe color-coded platform is compatible with NobelReplace® abutments • SBM (Soluble Blast Media) Textured Surface to top of implant • Color-coded fixture-mount usable as a transfer and shortened for use as a temporary abutment • Use of Titanium Alloy for an increase in strength compared to Nobel Biocare’s Tri-Lobe implants manufactured from CP Titanium

3.5mmD Platform

4.3mmD Platform

5.0mmD Platform

6.0mmD Platform

Cover Screw

3.5mmD Implant

4

4.3mmD Implant

5.0mmD Implant

6.0mmD Implant

Placing Carrier/Transfers & Making Impressions

Color-coded Titanium fixture-mount carrier

Align flat to labial for indexing of tri-lobe

Fixture-mount is screw-retained

Use fixture-mount as closed tray transfer


R e P l a n t : Two - P i e c e I m p l a n t RePlant USE REPLANT SURGICAL TRAY OR NOBEL BIOCARE’S TAPERED REPLACE IMPLANT DRILLS FOR INSERTION OF REPLANT IMPLANT

SBM Surface Implants

Includes Fixture Mount, Dual-Grip™ Fixation and Cover Screw

3.5mmD Code 603508 603510 603511 603513 603516

Diameter 3.5mmD 3.5mmD 3.5mmD 3.5mmD 3.5mmD

Length 8mmL 10mmL 11.5mmL 13mmL 16mmL

Platform 3.5mmD 3.5mmD 3.5mmD 3.5mmD 3.5mmD

Price $150.00 $150.00 $150.00 $150.00 $150.00

Diameter 4.3mmD 4.3mmD 4.3mmD 4.3mmD 4.3mmD

Length 8mmL 10mmL 11.5mmL 13mmL 16mmL

Platform 4.3mmD 4.3mmD 4.3mmD 4.3mmD 4.3mmD

Price $150.00 $150.00 $150.00 $150.00 $150.00

Diameter 5.0mmD 5.0mmD 5.0mmD 5.0mmD 5.0mmD

Length 8mmL 10mmL 11.5mmL 13mmL 16mmL

Platform 5.0mmD 5.0mmD 5.0mmD 5.0mmD 5.0mmD

Price $150.00 $150.00 $150.00 $150.00 $150.00

Diameter 6.0mmD 6.0mmD 6.0mmD 6.0mmD 6.0mmD

Length 8mmL 10mmL 11.5mmL 13mmL 16mmL

Platform 6.0mmD 6.0mmD 6.0mmD 6.0mmD 6.0mmD

Price $150.00 $150.00 $150.00 $150.00 $150.00

603508

603510

603511

603513

603516

604308

604310

604311

604313

604316

605008

605010

605011

605013

605016

606008

606010

606011

606013

606016

4.3mmD Code 604308 604310 604311 604313 604316 5.0mmD Code 605008 605010 605011 605013 605016 6.0mmD Code 606008 606010 606011 606013 606016

Replacement Surgical Cover Screws

Code 6035-01 6043-01 6050-01 6060-01

Components include Dual-Grip™ feature for use with 1.25mmD Hex Tool or Nobel Unigrip ScrewDriver

Platform 3.5mmD 4.3mmD 5.0mmD 6.0mmD

Price $20.00 $20.00 $20.00 $20.00

6035-01

6043-01

6050-01

6060-01

5


R e P l u s : Two - P i e c e I m p l a n t RePlus RePlus Two-Piece Implant System Featuring:

RePlus Packaging

• Tri-Lobe color-coded platform is compatible with NobelReplace® abutments

Fixture-Mount Transfer

• Color-coded fixture-mount usable as a transfer and shortened for use as a straight final abutment with snap-on comfort cap • Surface options: SBM (Soluble Blast Media) or HA-coated • Platform-switching with RePlant and NobelReplace abutments

3.5mmD Platform

4.3mmD Platform

5.0mmD Platform

Snap-On Comfort Cap

3.7mmD & 4.2mmD Implant

4.7mmD Implant

5.7mmD Implant

Fixture-Mount Transfer: Shortened for final abutment with Snap-on Comfort Cap and Transfer

step 1

6

Cover Screw

step 2

step 3

step 4


R e P l u s : Two - P i e c e I m p l a n t RePlus

SBM and HA Surface Implants

Includes Fixture Mount with Dual-Gripâ„¢ Fixation Screw, Cover Screw and Comfort Cap

3.7mmD SBM Code 703708 703710 703711 703713 703716

Price $175.00 $175.00 $175.00 $175.00 $175.00

HA Code 713708 713710 713711 713713 713716

Price $200.00 $200.00 $200.00 $200.00 $200.00

Diameter 3.7mmD 3.7mmD 3.7mmD 3.7mmD 3.7mmD

Length 8mmL 10mmL 11.5mmL 13mmL 16mmL

Platform 3.5mmD 3.5mmD 3.5mmD 3.5mmD 3.5mmD

Price $175.00 $175.00 $175.00 $175.00 $175.00

HA Code 714208 714210 714211 714213 714216

Price $200.00 $200.00 $200.00 $200.00 $200.00

Diameter 4.2mmD 4.2mmD 4.2mmD 4.2mmD 4.2mmD

Length 8mmL 10mmL 11.5mmL 13mmL 16mmL

Platform 3.5mmD 3.5mmD 3.5mmD 3.5mmD 3.5mmD

Price $175.00 $175.00 $175.00 $175.00 $175.00

HA Code 714708 714710 714711 714713 714716

Price $200.00 $200.00 $200.00 $200.00 $200.00

Diameter 4.7mmD 4.7mmD 4.7mmD 4.7mmD 4.7mmD

Length 8mmL 10mmL 11.5mmL 13mmL 16mmL

Platform 4.3mmD 4.3mmD 4.3mmD 4.3mmD 4.3mmD

Price $175.00 $175.00 $175.00 $175.00 $175.00

HA Code 715708 715710 715711 715713 715716

Price $200.00 $200.00 $200.00 $200.00 $200.00

Diameter 5.7mmD 5.7mmD 5.7mmD 5.7mmD 5.7mmD

Length 8mmL 10mmL 11.5mmL 13mmL 16mmL

Platform 5.0mmD 5.0mmD 5.0mmD 5.0mmD 5.0mmD

703708 713708

703710 713710

703711 713711

703713 713713

703716 713716

704208 714208

704210 714210

704211 714211

704213 714213

704216 714216

704708 714708

704710 714710

704711 714711

704713 714713

704716 714716

705708 715708

705710 715710

705711 715711

705713 715713

705716 715716

4.2mmD SBM Code 704208 704210 704211 704213 704216

4.7mmD SBM Code 704708 704710 704711 704713 704716

5.7mmD SBM Code 705708 705710 705711 705713 705716

7


R e A c t i ve : Two - P i e c e I m p l a n t ReActive ReActive Two-Piece Implant System Featuring:

ReActive Packaging

• Tri-Lobe color-coded platform is compatible with NobelReplace® abutments

Fixture-Mount Transfer

• Color-coded fixture-mount usable as a transfer and shortened for use as a platform-switching straight final abutment • Surface options: SBM (Soluble Blast Media) or HA-coated • Platform-switching with RePlant and NobelReplace abutments • Buttress threads with increased thread depth providing greater surface area for bone attachment and primary implant stability

3.5mmD Platform

4.3mmD Platform

5.0mmD Platform

Cover Screw

3.7mmD & 4.2mmD Implant

4.7mmD Implant

5.7mmD Implant

Placing Carrier/Transfers & Taking Impressions

Fixture-Mount Transfer: Shortened to fabricate final abutment

step 1

Color-coded titanium Align flat to labial for fixture-mount carrier indexing of tri-lobe

Fixture-mount is screw retained

8

Use fixture-mount as closed tray transfer

step 2


R e A c t i ve : Two - P i e c e I m p l a n t ReActive

SBM and HA Surface Implants

Includes Fixture Mount with Dual-Gripâ„¢ Fixation Screw and Cover Screw

3.7mmD SBM Code 753708 753710 753711 753713 753716

Price $200.00 $200.00 $200.00 $200.00 $200.00

HA Code 763708 763710 763711 763713 763716

Price $225.00 $225.00 $225.00 $225.00 $225.00

Diameter 3.7mmD 3.7mmD 3.7mmD 3.7mmD 3.7mmD

Length 8mmL 10mmL 11.5mmL 13mmL 16mmL

Platform 3.5mmD 3.5mmD 3.5mmD 3.5mmD 3.5mmD

Price $200.00 $200.00 $200.00 $200.00 $200.00

HA Code 764208 764210 764211 764213 764216

Price $225.00 $225.00 $225.00 $225.00 $225.00

Diameter 4.2mmD 4.2mmD 4.2mmD 4.2mmD 4.2mmD

Length 8mmL 10mmL 11.5mmL 13mmL 16mmL

Platform 3.5mmD 3.5mmD 3.5mmD 3.5mmD 3.5mmD

Price $200.00 $200.00 $200.00 $200.00 $200.00

HA Code 764708 764710 764711 764713 764716

Price $225.00 $225.00 $225.00 $225.00 $225.00

Diameter 4.7mmD 4.7mmD 4.7mmD 4.7mmD 4.7mmD

Length 8mmL 10mmL 11.5mmL 13mmL 16mmL

Platform 4.3mmD 4.3mmD 4.3mmD 4.3mmD 4.3mmD

Price $200.00 $200.00 $200.00 $200.00 $200.00

HA Code 765708 765710 765711 765713 765716

Price $225.00 $225.00 $225.00 $225.00 $225.00

Diameter 5.7mmD 5.7mmD 5.7mmD 5.7mmD 5.7mmD

Length 8mmL 10mmL 11.5mmL 13mmL 16mmL

Platform 5.0mmD 5.0mmD 5.0mmD 5.0mmD 5.0mmD

753708 763708

753710 763710

753711 763711

753713 763713

753716 763716

754208 764208

754210 764210

754211 764211

754213 764213

754216 764216

754708 764708

754710 764710

754711 764711

754713 764713

754716 764716

755708 765708

755710 765710

755711 765711

755713 765713

755716 765716

4.2mmD SBM Code 754208 754210 754211 754213 754216

4.7mmD SBM Code 754708 754710 754711 754713 754716

5.7mmD SBM Code 755708 755710 755711 755713 755716

9


F i x t u re - M o u n t Pa c k ag i n g

The RePlant, RePlus and ReActive Implants fixture-mounts, designed for use as implant to function as an abutments. A cover screw RePlus fixture-mount is provided with Prepare surgical site with double cutting step drill

All of Implant Direct’s implants come in a sterile vial

Each label is color-coded with two tear-off labels

Each cap is color-coded by platform diameter of implant

Drop implant assembly out of vial onto a sterile surface

Remove implant assembly with a fixture-mount drill or ratchet

Insert implant into osteotomy

Index fixture-mount flat to labial

Remove fixture-mount

The flat of the fixture mount aligned the lobe to the labial

Remove the holder containing the cover screw & comfort cap

Snap-on comfort cap is located in the top portion of holder

Attach fixture-mount to corresponding color-coded implant analog

To attach abutment, use 30Ncm in hard bone. In soft bone, use only finger pressure

10

are mounted on color-coded level transfers or shortened is included in each vial. The a snap-on comfort cap.

Check for occlusal clearance prior to attaching comfort cap

Remove colored section from fixture-mount through groove to create a final straight abutment

Test retention & rotate if necessary to increase retention

Suture soft tissue around comfort cap


H e a l i n g C o l l a r s , Tr a n s f e r s , A n a l og s a n d A l i g n m e n t To o l s Healing Collars

Code 6035-13 6035-15 6043-13 6043-15 6050-13 6050-15 6060-13 6060-15

Requires 1.25mmD Hex Tool

Width 4.6mmD 4.6mmD 5.6mmD 5.6mmD 6.1mmD 6.1mmD 6.6mmD 6.6mmD

Length 3mmL 5mmL 3mmL 5mmL 3mmL 5mmL 3mmL 5mmL

Width 3.5mmD 3.5mmD 4.3mmD 4.3mmD 5.0mmD 5.0mmD 6.0mmD 6.0mmD

Length 3mmL 5mmL 3mmL 5mmL 3mmL 5mmL 3mmL 5mmL

Closed-Tray Implant Transfers

Code 6035-05 6043-05 6050-05 6060-05

Platform 3.5mmD 4.3mmD 5.0mmD 6.0mmD

Platform 3.5mmD 4.3mmD 5.0mmD 6.0mmD

Platform 3.5mmD 3.5mmD 4.3mmD 4.3mmD 5.0mmD 5.0mmD 6.0mmD 6.0mmD

6035-13

6043-13

6050-13

6060-13

6035-15

6043-15

6050-15

6060-15

Price $30.00 $30.00 $30.00 $30.00 $30.00 $30.00 $30.00 $30.00

6035-13N

6043-13N

6050-13N

6060-13N

6035-15N

6043-15N

6050-15N

6060-15N

Includes Dual-Grip™ Fixation Screw

Replacement Screw - 2ea 1000-28 1000-27 1000-27 1000-27

Price $30.00 $30.00 $30.00 $30.00

1000-28

1000-27

6035-05

6043-05

6050-05

6060-05

1000-12

1000-11

6035-08

6043-08

6050-08

6060-08

6035-06

6043-06

6050-06

6060-06

6035-07

6043-07

6050-07

6060-07

Includes Long Fixation Screw [Requires 1.25mmD Hex Tool]

Open-Tray Implant Transfers

Code 6035-08 6043-08 6050-08 6060-08

Price $30.00 $30.00 $30.00 $30.00 $30.00 $30.00 $30.00 $30.00

Components include Dual-Grip™ feature for use with 1.25mmD Hex Tool or Nobel Unigrip ScrewDriver

Narrow Healing Collars

Code 6035-13N 6035-15N 6043-13N 6043-15N 6050-13N 6050-15N 6060-13N 6060-15N

Platform 3.5mmD 3.5mmD 4.3mmD 4.3mmD 5.0mmD 5.0mmD 6.0mmD 6.0mmD

Replacement Screw - 2ea 1000-12 1000-11 1000-11 1000-11

Price $30.00 $30.00 $30.00 $30.00

Implant Analogs

Code 6035-06 6043-06 6050-06 6060-06

Platform 3.5mmD 4.3mmD 5.0mmD 6.0mmD

Price $20.00 $20.00 $20.00 $20.00

Platform 3.5mmD 4.3mmD 5.0mmD 6.0mmD

Price $40.00 $40.00 $40.00 $40.00

Lab Abutment Alignment Tools

Code 6035-07 6043-07 6050-07 6060-07

11


Selection Chart: Implant and Straight Abutment Components 3.5mmD Platform

4.3mmD Platform

5.0mmD Platform

6.0mmD Platform

3.5mmD

4.3mmD

5.0mmD

6.0mmD

Implant Transfer 6035-05 6035-08

Carrier/Transfer

RePlus Fixture Mount

Implant Analog 6043-06

Straight Abutment

RePlus Fixture Mount

Comfort Cap 3037-26

Castable Coping 3037-28

Straight Abutment Analog 3037 incl. Castable Coping

12

Straight Abutment Transfer 3047-02

Comfort Cap 3047-26

Straight Abutment Analog 3047 incl. Castable Coping

Castable Coping 3047-28

Carrier/Transfer

Implant Analog 6050-06

Straight Abutment

OR

Straight Abutment Transfer 3037-02

Implant Transfer 6060-05 6060-08

Implant Transfer 6050-05 6050-08

Carrier/Transfer

Carrier/Transfer

Implant Analog 6035-06

Straight Abutment

Implant Transfer 6043-05 6043-08

RePlus Fixture Mount

Implant Analog 6060-06

Straight Abutment

OR

Straight Abutment Transfer 3057-02

Comfort Cap 3057-26

Castable Coping 3057-28

Straight Abutment Analog 3057 incl. Castable Coping

Straight Abutment Transfer 3065-02

Comfort Cap 3065-26

Castable Coping 3065-28

Straight Abutment Analog 3065 incl. Castable Coping


S t r a i g h t A b u t m e n t s , S n a p - o n Tr a n s f e r s a n d L a b A n a l og s Straight Abutments

Code 6035-21 6035-22 6035-23 6043-21 6043-22 6043-23 6050-21 6050-22 6050-23 6060-21 6060-22 6060-23

Platform 3.5mmD 3.5mmD 3.5mmD 4.3mmD 4.3mmD 4.3mmD 5.0mmD 5.0mmD 5.0mmD 6.0mmD 6.0mmD 6.0mmD

Includes Transfer, Comfort Cap & Fixation Screw with Dual-Grip™

Collar Heights 1mm 2mm 3mm 1mm 2mm 3mm 1mm 2mm 3mm 1mm 2mm 3mm

Use Analog 3037 3037 3037 3047 3047 3047 3057 3057 3057 3065 3065 3065

Replacement Screw 1000-23 1000-23 1000-23 1000-22 1000-22 1000-22 1000-22 1000-22 1000-22 1000-22 1000-22 1000-22

Price $85.00 $85.00 $85.00 $85.00 $85.00 $85.00 $85.00 $85.00 $85.00 $85.00 $85.00 $85.00

6035-21

6043-21

6050-21

6060-21

6035-22

6043-22

6050-22

6060-22

6035-23

6043-23

6050-23

6060-23

3037-02

3047-02

3057-02

3065-02

Straight Abutment Transfers

Code 3037-02 3047-02 3057-02 3065-02

Abutment Width 3.7mmD 4.7mmD 5.7mmD 6.5mmD

Price (includes two pieces) $30.00 $30.00 $30.00 $30.00

Straight Abutment Comfort Caps

Code 3037-26 3047-26 3057-26 3065-26

Abutment Width 3.7mmD 4.7mmD 5.7mmD 6.5mmD

Straight Abutment Analogs

Code 3037 3047 3057 3065

Price (includes two pieces) $30.00 $30.00 $30.00 $30.00

3037-26

3047-26

3057-26

3065-26

3037

3047

3057

3065

3037-28

3047-28

3057-28

3065-28

Includes Castable Coping

Abutment Width 3.7mmD 4.7mmD 5.7mmD 6.5mmD

Price $35.00 $35.00 $35.00 $35.00

Straight Abutment Castable Copings

Code 3037-28 3047-28 3057-28 3065-28

Abutment Width 3.7mmD 4.7mmD 5.7mmD 6.5mmD

Price (includes two pieces) $30.00 $30.00 $30.00 $30.00

13


S e l e c t i o n C h a r t : A b u t m e n t s f o r Pa r t i a l l y E d e n t u l o u s R e s t o r a t i o n s 3.5mmD Platform

4.3mmD Platform

5.0mmD Platform

6.0mmD Platform

S t r a i g h t A b u t m e n t s - I n c l u d e s Transfer and Comfort Cap

6035-21

6035-22

6035-23

6043-21

6043-22

6043-23

6050-21

6050-22

6050-23

6060-21

6060-22

6060-23

S t r a i g h t C o n t o u re d a n d P re p a r a b l e A b u t m e n t s

6035-31C 6035-32C

6035-31 6035-32

6035-30L

6043-31C 6043-32C

6043-31 6043-32

6050-31C 6050-32C

6043-30L

6050-31 6050-32

6060-31 6060-32

6050-30L

6060-30L

A n g l e d C o n t o u re d A b u t m e n t s

6035-51-08C 6035-52-08C

6035-51-15C 6035-52-15C

6035-51 6035-52

6043-51-15C 6043-52-15C

6043-51 6043-52

6043-51-08C 6043-52-08C

6050-51-15C 6050-52-15C

6050-51 6050-52

6050-51-08C 6050-52-08C

6060-51 6060-52

S t r a i g h t C o n t o u re d A b u t m e n t s : Tri-Lobe at 30/60/90 Degrees 30/60/90 Degrees

30/60/90 Degrees

30/60/90 Degrees

30/60/90 Degrees

6035-32-30 6035-32-60 6035-32-90

6043-32-30 6043-32-60 6043-32-90

6050-32-30 6050-32-60 6050-32-90

6060-32-30 6060-32-60 6060-32-90

A n g l e d C o n t o u re d A b u t m e n t s : Tri-Lobe at 30/60/90 Degrees 30/60/90 Degrees

30/60/90 Degrees

30/60/90 Degrees

6035-52-30 6035-52-60 6035-52-90

6043-52-30 6043-52-60 6043-52-90

6050-52-30 6050-52-60 6050-52-90

E n g ag i n g a n d N o n - E n g ag i n g A b u t m e n t s

6035-40 6035-41

6035-46

non-engaging

14

6035-47

6035-49

6043-40 6043-41

6043-46

6043-47

6043-49

6050-40 6050-41

6050-46

6050-47

6050-49

6060-46

6060-47

6060-49


S t r a i g h t a n d A n g l e d C o n t o u re d , T i t a n i u m a n d Z i rc o n i a A b u t m e n t s Straight Titanium Contoured Abutments

Code 6035-31 6035-32 6043-31 6043-32 6050-31 6050-32 6060-31 6060-32

Platform 3.5mmD 3.5mmD 4.3mmD 4.3mmD 5.0mmD 5.0mmD 6.0mmD 6.0mmD

Collar Heights 1mm 2mm 1mm 2mm 1mm 2mm 1mm 2mm

15º Angled Titanium Contoured Abutments

Code 6035-51 6035-52 6043-51 6043-52 6050-51 6050-52 6060-51 6060-52

Platform 3.5mmD 3.5mmD 4.3mmD 4.3mmD 5.0mmD 5.0mmD 6.0mmD 6.0mmD

Collar Heights .75mm 2mm .75mm 2mm .75mm 2mm .75mm 2mm

0°, 8° & 15° Zirconia Contoured Abutments

Includes Dual-Grip™ Fixation Screw

Replacement Screw 1000-23 1000-23 1000-22 1000-22 1000-22 1000-22 1000-22 1000-22

Price $85.00 $85.00 $85.00 $85.00 $85.00 $85.00 $85.00 $85.00

6035-31

6043-31

6050-31

6060-31

6035-32

6043-32

6050-32

6060-32

6035-51

6043-51

6050-51

6060-51

6035-52

6043-52

6050-52

6060-52

Includes Dual-Grip™ Fixation Screw

Replacement Screw 1000-23 1000-23 1000-22 1000-22 1000-22 1000-22 1000-22 1000-22

Price $85.00 $85.00 $85.00 $85.00 $85.00 $85.00 $85.00 $85.00

Includes Dual-Grip™ Fixation Screw

Code 6035-31C 6035-32C 6035-51-08C 6035-52-08C 6035-51-15C 6035-52-15C 6035-30CB

Platform 3.5mmD 3.5mmD 3.5mmD 3.5mmD 3.5mmD 3.5mmD 3.5mmD

Angulation Collar Heights Replacement Screw 0° 1mm 1000-23 0° 2mm 1000-23 8° 1mm 1000-23 8° 2mm 1000-23 15° 1mm 1000-23 15° 2mm 1000-23 .5mm 1000-23

Price $120.00 $120.00 $120.00 $120.00 $120.00 $120.00 $60.00

Code 6043-31C 6043-32C 6043-51-08C 6043-52-08C 6043-51-15C 6043-52-15C 6043-30CB

Platform 4.3mmD 4.3mmD 4.3mmD 4.3mmD 4.3mmD 4.3mmD 4.3mmD

Angulation Collar Heights Replacement Screw 1000-22 1mm 0° 1000-22 2mm 0° 1000-22 1mm 8° 1000-22 2mm 8° 1000-22 1mm 15° 1000-22 2mm 15° 1000-22 .5mm -

Price $120.00 $120.00 $120.00 $120.00 $120.00 $120.00 $60.00

Code 6050-31C 6050-32C 6050-51-08C 6050-52-08C 6050-51-15C 6050-52-15C 6050-30CB

Platform 5.0mmD 5.0mmD 5.0mmD 5.0mmD 5.0mmD 5.0mmD 5.0mmD

Angulation Collar Heights Replacement Screw 0° 1mm 1000-22 0° 2mm 1000-22 8° 1mm 1000-22 8° 2mm 1000-22 15° 1mm 1000-22 15° 2mm 1000-22 .5mm 1000-22

Price $120.00 $120.00 $120.00 $120.00 $120.00 $120.00 $60.00

6035-31C

6035-51-08C 6035-51-15C

6035-30CB

6035-32C

6035-52-08C 6035-52-15C

6043-31C

6043-51-08C 6043-51-15C

6043-30CB 6043-32C

6043-52-08C 6043-52-15C

6050-31C

6050-51-08C 6050-51-15C

6050-30CB

6050-32C

6050-52-08C 6050-52-15C

15


A n g l e d , C o n t o u re d a n d L a b T i t a n i u m A b u t m e n t s Straight Contoured Abutments with 30, 60 & 90 Degree offset Tri-Lobe

Code 6035-32-30 6035-32-60 6035-32-90 6043-32-30 6043-32-60 6043-32-90 6050-32-30 6050-32-60 6050-32-90 6060-32-30 6060-32-60 6060-32-90

Collar Heights 2mm 2mm 2mm 2mm 2mm 2mm 2mm 2mm 2mm 2mm 2mm 2mm

Includes Dual-Grip™ Fixation Screw

Platform 3.5mmD 3.5mmD 3.5mmD 4.3mmD 4.3mmD 4.3mmD 5.0mmD 5.0mmD 5.0mmD 6.0mmD 6.0mmD 6.0mmD

Angled Contoured Abutments with 30, 60 & 90 Degree offset Tri-Lobe

Code 6035-52-30 6035-52-60 6035-52-90 6043-52-30 6043-52-60 6043-52-90 6050-52-30 6050-52-60 6050-52-90

Collar Heights 2mm 2mm 2mm 2mm 2mm 2mm 2mm 2mm 2mm

Collar Heights 0mm 0mm 0mm 0mm

Replacement Fixation Screws

Code 1000-23 1000-28 1000-22 1000-27 16

Price $85.00 $85.00 $85.00 $85.00 $85.00 $85.00 $85.00 $85.00 $85.00 $85.00 $85.00 $85.00

6035-32-30

6043-32-30

6050-32-30

6060-32-30

6035-32-60

6043-32-60

6050-32-60

6060-32-60

6035-32-90

6043-32-90

6050-32-90

6060-32-90

Includes Dual-Grip™ Fixation Screw

Platform 3.5mmD 3.5mmD 3.5mmD 4.3mmD 4.3mmD 4.3mmD 5.0mmD 5.0mmD 5.0mmD

Straight Wide Lab Abutments

Code 6035-30L 6043-30L 6050-30L 6060-30L

Replacement Screw 1000-23 1000-23 1000-23 1000-22 1000-22 1000-22 1000-22 1000-22 1000-22 1000-22 1000-22 1000-22

Replacement Screw 1000-23 1000-23 1000-23 1000-22 1000-22 1000-22 1000-22 1000-22 1000-22

Price $85.00 $85.00 $85.00 $85.00 $85.00 $85.00 $85.00 $85.00 $85.00

6035-52-30

6043-52-30

6050-52-30

6035-52-60

6043-52-60

6050-52-60

6035-52-90

6043-52-90

6050-52-90

Includes Dual-Grip™ Fixation Screw

Platform 3.5mmD 4.3mmD 5.0mmD 6.0mmD

Replacement Screw 1000-23 1000-22 1000-22 1000-22

Price $75.00 $75.00 $75.00 $75.00

6035-30L

6043-30L

6050-30L

1000-23

1000-28

1000-22

6060-30L

Components include Dual-Grip™ feature for use with 1.25mmD Hex Tool or Nobel Unigrip ScrewDriver

Platform 3.5mmD only (short) 3.5mmD only (long) 4.3, 5.0 and 6.0mmD (short) 4.3, 5.0 and 6.0mmD (long)

Price (includes two pieces) $30.00 $30.00 $30.00 $30.00

1000-27


E n g ag i n g a n d N o n - E n g ag i n g A b u t m e n t s Gold Engaging Cast-to Abutments

Code 6035-40 6043-40 6050-40

Collar Heights 1mm 1mm 1mm

Includes Dual-Grip™ Fixation Screw

Platform 3.5mmD 4.3mmD 5.0mmD

Gold Non-Engaging Cast-to Abutments

Code 6035-41 6043-41 6050-41

Collar Heights 1mm 1mm 1mm

Platform 3.5mmD 4.3mmD 5.0mmD

Plastic Non-Engaging Castable Abutments

Code 6035-46 6043-46 6050-46 6060-46

Collar Heights 0mm 0mm 0mm 0mm

Platform 3.5mmD 4.3mmD 5.0mmD 6.0mmD

Plastic Engaging Temporary Abutments

Code 6035-47 6043-47 6050-47 6060-47

Collar Heights 0mm 0mm 0mm 0mm

Platform 3.5mmD 4.3mmD 5.0mmD 6.0mmD

Titanium Non-Engaging Temporary Abutments

Code 6035-49 6043-49 6050-49 6060-49

Collar Heights 0mm 0mm 0mm 0mm

Platform 3.5mmD 4.3mmD 5.0mmD 6.0mmD

Replacement Screw 1000-23 1000-22 1000-22

Price $100.00 $100.00 $100.00

6035-40

6043-40

6050-40

6035-41

6043-41

6050-41

Includes Dual-Grip™ Fixation Screw

Replacement Screw 1000-23 1000-22 1000-22

Price $100.00 $100.00 $100.00

Includes Dual-Grip™ Fixation Screw

Replacement Screw 1000-23 1000-22 1000-22 1000-22

Price $30.00 $30.00 $30.00 $30.00

6035-46

6043-46

6050-46

6060-46

6035-47

6043-47

6050-47

6060-47

6035-49

6043-49

6050-49

6060-49

Includes Dual-Grip™ Fixation Screw

Replacement Screw 1000-23 1000-22 1000-22 1000-22

Price $35.00 $35.00 $35.00 $35.00

Includes Dual-Grip™ Fixation Screw

Replacement Screw 1000-23 1000-22 1000-22 1000-22

Price $35.00 $35.00 $35.00 $35.00

17


C l i n i c a l a n d L a b o r a t o r y P ro c e d u re s f o r C o n t o u re d A b u t m e n t s Orienting the 15º Angled Abutment The flat side of the Fixture Mount/Transfer [Fig. 1] and the angle of the 15° abutment [Fig. 2] are manufactured to align with the outer radius of one of the implant’s three internal lobes.

To establish the optimum angle of the abutment, index the flat surface of the Fixture Mount/Transfer either toward or away from the desired direction of abutment angle at the time of implant placement.

Fig. 2 The two-piece, 15º Angled Abutment consists of an angled body and a fixation screw

Fig. 1

Fixture Mount/Transfer

Option 1: Attaching an Angled Abutment and chairside procedures for preparation Remove the Healing Collar with a 1.25mmD Hex Tool

Attach the abutment with the 1.25mmD Hex Tool

Mark the required modifications to achieve appropriate clearance

Detach the abutment with the 1.25mmD Hex Tool

Attach the abutment to the corresponding Implant Analog. Reduce the abutment to achieve appropriate clearance

Option 2: Stage-One transfer followed by laboratory procedures for abutment preparation and provisionalization

During implant placement, index the flat of the Fixture-Mount

Block out the top of the Fixture-Mount and make a conventional transfer impression

Attach the Cover Screw and submerge implant

Attach the Angled Abutment to the Implant Analog in the working cast with a 1.25mmD Hex Tool

Modify angle of abutment and refine margins as required

Fabricate the temporary crown

Attach the FixtureMount to the Implant Analog and seat into the negative of the impression

Pour the working cast in dental stone with soft tissue replication material

At Stage-2 surgery, attach the prepared abutment and tighten to 30Ncm with a Torque Wrench

Occlude screw access hole and confirm contour of restoration

Remove the FixtureMount from the working cast with the 1.25mmD Hex Tool

Cement the provisional restoration

Common procedures for abutment placement, margin finessing, impressing and placement of restoration Tighten to 30Ncm with a Torque Wrench

18

Finesse the margins with a highspeed bur and copious irrigation prior to final impressing

Make an impression following standard clinical procedures

Attach provisional restoration and cement onto the prepared abutment

Follow standard laboratory procedures, fabricate the final restoration and cement onto the prepared abutment


C o n t o u re d A b u t m e n t s w i t h 0 , 3 0 , 6 0 o r 9 0 D e g re e Tr i - L o b e O f f s e t

Implant with tri-lobe aligned to labial. Rotate transfer and seat mating tri-lobes.

Tri-Lobe aligned perpendicular to labial. (0 degrees offset)

Dimple of Alignment Tool is perpendicular to labial: 0 degree offset of implant tri-lobe.

Use 0 degree tri-lobe offset Contoured Abutment when tool is inserted as above.

Make transfer impression using vinyl polysiloxane material.

Attach transfer to matching colored implant analog. Insert transfer and pour impression.

Evaluate rotational position of trilobe for selection of straight and angled contoured abutments

Tri-Lobe aligned 30 degrees counter-clockwise to line perpendicular to labial.

Tri-Lobe aligned 60 degrees counter-clockwise to line perpendicular to labial.

Tri-Lobe aligned 90 degrees counter-clockwise to line perpendicular to labial.

Dimple on the Tool is 1 facet (30 degrees) counter-clockwise to line perpendicular to labial.

Dimple on the Tool is 2 facets (60 degrees) counter-clockwise to line perpendicular to labial.

Dimple on the tool is 3 facets (90 degrees) counter-clockwise to line perpendicular to labial.

Use 30 degree tri-lobe offset Contoured Abutment when tool is inserted as above.

Use 60 degree tri-lobe offset Contoured Abutment when tool is inserted as above.

Use 90 degree tri-lobe offset Contoured Abutment when tool is inserted as above.

19


Clinical Procedures for Titanium Temporar y Abutment/Fixture-Mount

1. Unthread the healing collars from the implant using appropriate driver. The top of the implants are exposed.

2. Use the prepared implant fixture mount as a temporary abutment (reshaping of tri-lobe at apex is essential) or select the Titanium Temporary Abutment matching the implant prosthetic platform.

3. Place the fixation screw through the abutment and tighten in place using the appropriate driver. The torque value of the fixation screw is determined by clinician. Standard torque value for fixation screws is 30Ncm.

4. Confirm there is less than 40 degrees of relative divergence between abutments to be splinted together.

5. Mark position of Titanium Temporary Abutments on under surface of denture with indelible marker.

6. Use acrylic trimmer to drill holes through denture corresponding to marked positions.

7. Seat denture over Titanium Temporary Abutment to confirm passive placement. Check occlusion with opposing arch. Occlude screw access hole with cotton pellet.

8. Use autopolymerizing acrylic or similar light cure material to attach prosthesis to Titanium Temporary Abutments. Allow to set prior to removal from mouth.

9. Remove prosthesis from the mouth, flip over to expose tissue side. Use additional autopolymerizing resin to fill in any voids around the processed abutments.

10. Optional step: Attach implant analogs to base of denture. Pour a soft tissue working cast to prevent engagement with undercuts. Articulate with opposing arch.

11. Remove denture and trim the prosthesis to allow access for patient cleaning. The prosthesis is now a fixed restoration, removable by clinician only.

12. Attach prosthesis to implants and tighten in place using the appropriate tooling. Occlude screw access holes with material of choice.

20


S e l e c t i o n C h a r t : O ve rd e n t u re a n d S c rew - R e t a i n e d R e s t o r a t i o n s 3.5mmD Platform

4.3mmD Platform

O ve rd e n t u re A b u t m e n t s

6.0mmD Platform

5.0mmD Platform

( * I n c l u d e s Tr a n s f e r a n d C o m f o r t C a p )

Overdenture Abutments 6035-61 6035-62 6035-64

6043-61 6043-62 6043-64

6035-64-30 6035-64-15

6050-61 6050-62 6050-64

6043-64-30 6043-64-15

6060-61 6060-62 6060-64

6050-64-30 6050-64-15

O ve rd e n t u re A b u t m e n t Tr a n s f e r s , A n a l og & C o m f o r t C a p Open-Tray Transfer

OD Abutment Comfort Cap Transfers and Analog *4000-13

1000-61

*1000-68

Closed-Tray Transfer

1000-62

1000-63

O ve rd e n t u re C o p i n g s Overdenture Abutment Components

1000-64

1000-65

Gold

1000-66

Titanium

Plastic

Ball Abutments Ball Abutments

1000-67

6035-72 6035-74

1000-69

Titanium

Gold/Plastic

( * * I n c l u d e s Tr a n s f e r a n d C o m f o r t C a p )

6043-72 6043-74

6050-72 6050-74

6060-72 6060-74

Ball Attachments

Ball Abutment Components **1000-87

**1000-84

1000-85

GPS™ Abutments GPS™ Abutments

6035-91 6035-92 6035-93 6035-94 6035-95

1000-81

1000-82

6043-91 6043-92 6043-93 6043-94 6043-95 6035-94-30 6035-94-15

1000-83

1000-88

1000-86

( * * * I n c l u d e s Tr a n s f e r, A b u t m e n t H o u s i n g K i t a n d C o m f o r t C a p ) 6050-91 6050-92 6050-93 6050-94 6050-95 6043-94-30 6043-94-15

6050-94-30 6050-94-15

GPS™ Attachments GPS™ Abutment Components ***4500-26

***1000-94

1000-95

1000-92R

1000-92G

***1000-91

1000-92C

1000-92E

1000-93

1000-98S

1000-96

21


S c rew - R e c e i v i n g a n d B a l l A b u t m e n t s

Overdenture Abutments

Code 6035-61 6035-62 6035-64 6043-61 6043-62 6043-64 6050-61 6050-62 6050-64 6060-61 6060-62 6060-64

Collar Heights 1mm 2mm 4mm 1mm 2mm 4mm 1mm 2mm 4mm 1mm 2mm 4mm

Angled Overdenture Abutments

Code 6035-64-15 6043-64-15 6050-64-15 6035-64-30 6043-64-30 6050-64-30

15º 15º 15º 30º 30º 30º

Description Angled Abutment Angled Abutment Angled Abutment Angled Abutment Angled Abutment Angled Abutment

22

Platform 3.5mmD 3.5mmD 3.5mmD 4.3mmD 4.3mmD 4.3mmD 5.0mmD 5.0mmD 5.0mmD 6.0mmD 6.0mmD 6.0mmD

Price $85.00 $85.00 $85.00 $85.00 $85.00 $85.00 $85.00 $85.00 $85.00 $85.00 $85.00 $85.00

6035-61

6043-61

6050-61

6060-61

6035-62

6043-62

6050-62

6060-62

6035-64

6043-64

6050-64

6060-64

Includes Dual-Grip™ Abutment Screw, Transfer & Comfort Cap [Screw Top requires 2.5mmD Hex Tool]

Platform 3.5mmD 4.3mmD 5.0mmD 3.5mmD 4.3mmD 5.0mmD

Price $100.00 $100.00 $100.00 $100.00 $100.00 $100.00

6035-64-15

6043-64-15

6050-64-15

6035-64-30

6043-64-30

6050-64-30

Includes Transfer & Comfort Cap [Requires 1.25mmD Hex Tool]

Ball Abutments

Code 6035-72 6035-74 6043-72 6043-74 6050-72 6050-74 6060-72 6060-74

Includes Transfer & Comfort Cap [Requires 1.25mmD Hex Tool]

Collar Heights 2mm 4mm 2mm 4mm 2mm 4mm 2mm 4mm

Platform 3.5mmD 3.5mmD 4.3mmD 4.3mmD 5.0mmD 5.0mmD 6.0mmD 6.0mmD

Price $85.00 $85.00 $85.00 $85.00 $85.00 $85.00 $85.00 $85.00

6035-72

6043-72

6050-72

6060-72

6035-74

6043-74

6050-74

6060-74


GPS™ Abutments and Angled Base Components

Angled GPS Abutments

Code 6035-94-15 6043-94-15 6050-94-15 6035-94-30 6043-94-30 6050-94-30

15º 15º 15º 30º 30º 30º

GPS™ Abutments

Code 6035-91 6035-92 6035-93 6035-94 6035-95 6043-91 6043-92 6043-93 6043-94 6043-95 6050-91 6050-92 6050-93 6050-94 6050-95

Includes Abutment Screw, Transfer, Comfort Cap, GPS Abutment Housing Kit & Clear male liner [Screw Top requires 12.5mmD Hex Tool]

Description Angled Abutment Angled Abutment Angled Abutment Angled Abutment Angled Abutment Angled Abutment

Price $120.00 $120.00 $120.00 $120.00 $120.00 $120.00

6035-94-15

6043-94-15

6050-94-15

6035-94-30

6043-94-30

6050-94-30

Includes Transfer, Comfort Cap, GPS Abutment Housing Kit & Clear male liner [Requires 1.25mmD Hex Tool]

Collar Heights 1mm 2mm 3mm 4mm 5mm 1mm 2mm 3mm 4mm 5mm 1mm 2mm 3mm 4mm 5mm

Replacement Tops for Angled Abutments

Code 1000-60 1000-70 1000-90

Platform 3.5mmD 4.3mmD 5.0mmD 3.5mmD 4.3mmD 5.0mmD

Platform 3.5mmD 3.5mmD 3.5mmD 3.5mmD 3.5mmD 4.3mmD 4.3mmD 4.3mmD 4.3mmD 4.3mmD 5.0mmD 5.0mmD 5.0mmD 5.0mmD 5.0mmD

Price $100.00 $100.00 $100.00 $100.00 $100.00 $100.00 $100.00 $100.00 $100.00 $100.00 $100.00 $100.00 $100.00 $100.00 $100.00

6035-91

6035-92

6035-93

6035-94

6035-95

6043-91

6043-92

6043-93

6043-94

6043-95

6050-91

6050-92

6050-94

6050-95

6050-93

Includes Transfer & Comfort Cap

Description Replacement Screw Top for Angled Base [Requires 2.5mmD Hex Tool] Replacement Ball Top for Angled Base [Requires 1.25mmD Hex Tool] Replacement GPS Top for Angled Base [Requires 1.25mmD Hex Tool]

Price $35.00 $35.00 $35.00

1000-60

1000-70

1000-90

23


Ancillary Components for Overdenture and Screw-Retained Restorations Overdenture Abutment Comfort Cap, Transfers & Analog

Code 1000-61 1000-62 1000-63 1000-68 4000-13 1000-14 1000-15

Platform 5.0mmD 5.0mmD 5.0mmD 5.0mmD 5.0mmD -

Description Aluminum Analog Open-Tray Transfer plus Fixation Screw Closed-Tray Transfer plus Fixation Screw Plastic Abutment Transfer - 2ea Plastic Comfort Cap - 2ea Replacement Open-Tray Fixation Screw - 2ea Replacement Closed-Tray Fixation Screw - 2ea

Overdenture Abutment Components

Code 1000-64 1000-65 1000-66 1000-67 1000-69 1000-05 1000-25

Screws require 1.25mmD Hex Tool

Platform 5.0mmD 5.0mmD 5.0mmD 5.0mmD 5.0mmD -

Price $20.00 $30.00 $30.00 $30.00 $30.00 $30.00 $30.00

1000-61

1000-62

1000-63

1000-68

4000-13

Includes Fixation Screw [1000-05], optional Dual-Grip™ Fixation Screw [1000-25]

Description Gold Coping Titanium Coping Plastic Coping Gold & Plastic Coping Titanium Temporary Coping Coping Fixation Screw - 2ea Dual-Grip™ Coping Fixation Screw - 2ea

Price $80.00 $40.00 $35.00 $80.00 $35.00 $30.00 $30.00

1000-05

1000-25

1000-64

1000-65

1000-66

1000-67 1000-69

Ball Abutment Components

Code 1000-81 1000-82 1000-83 1000-84 1000-85 1000-86 1000-87 1000-88

Description Ball Abutment Housing - 2ea Nylon Liner - 2ea Nylon Liner Transfer - 2ea Ball Abutment Transfer - 2ea Ball Abutment Analog Ball Abutment Tools Ball Abutment Comfort Cap - 2ea Ball Abutment Housing & Nylon Liner

Price $30.00 $15.00 $15.00 $30.00 $20.00 $65.00 $30.00 $22.00

1000-81

1000-82

1000-83

1000-84

1000-85

1000-87

1000-86

1000-88

GPS Abutment Transfer, Analogs and Alignment Tools

Code 1000-94 1000-95 1000-97 4500-26 1000-99

Description Impression Coping - 2ea Abutment Analog 4mmD - 2ea Abutment Parallel Post - 4ea Comfort Cap - 2ea Plastic Abutment Angle Measure Guide

Price $30.00 $32.00 $16.00 $10.00 $5.00

4500-26

1000-97

1000-94

1000-99

1000-95

GoDirect and GPS Abutment Components

Code 1000-92C 1000-92G 1000-92E 1000-92R 1000-91 1000-93 1000-98S

Retention Force 4.5lbs 3.0lbs 2.0lbs 1.0lb Assorted

Description Replacement Male Clear - 4ea Replacement Male Green - 4ea Replacement Male Orange - 4ea Replacement Male Red - 4ea GPS Abutment Housing Kit - 1ea Black Processing Male - 4ea Abutment Processing Cap/Male Kit - 1ea

Price $16.00 $16.00 $16.00 $16.00 $10.00 $16.00 $20.00

1000-92C

1000-92E

1000-91

1000-92G

1000-92R

1000-93

GPS Instrumentation

Code 1000-96 24

Description Core Tool - Male Removal & Seating Tool

Price $75.00

1000-96

1000-98S


S u r g i c a l a n d P ro s t h e t i c I n s t r u m e n t s Tapered Hex Tools

Code THT1.25 THT1.25S

Description 1.25mmD Tapered Hex Tool-Long 1.25mmD Tapered Hex Tool-Short

Price $40.00 $40.00 THT1.25

Straight Hex Tools

Square connection for use with Ratchet or Torque Wrench

Description 1.25mmD Straight Hex Tool-Long (For use with Torque Wrench) 1.25mmD Straight Hex Tool-Short (For use with Torque Wrench) 2.0mmD Straight Hex Tool-Long 2.0mmD Straight Hex Tool-Short 2.5mmD Straight Hex Tool-Long (with retentive O-ring) 2.5mmD Straight Hex Tool-Short (with retentive O-ring) 3.0mmD Straight Hex Tool-Long 3.0mmD Straight Hex Tool-Short

Code HT1.25 HT1.25S HT2.0 HT2.0S HT2.5 HT2.5S HT3.0 HT3.0S Hex Drills

THT1.25S

Price $40.00 $40.00 $40.00 $40.00 $40.00 $40.00 $40.00 $40.00

HT1.25

HT2.0

HT2.5

HT3.0

HT1.25S

HT2.0S

HT2.5S

HT3.0S

HD1.25

HD2.0

HD2.5

HD3.0

Latch head connection for use with Surgical Motor

Code HD1.25 HD2.0 HD2.5 HD3.0

Description 1.25mmD Hex Drill 2.0mmD Hex Drill 2.5mmD Hex Drill (with retentive O-ring) 3.0mmD Hex Drill

Price $40.00 $40.00 $40.00 $40.00

Description Ratchet 30Ncm Torque Wrench 35Ncm Torque Wrench 2.5mmD Stainless Steel Handle (with retentive O-ring) Fixture Mount Drill (with retentive O-ring) Paralleling Tool 2.8/2.3 Locator Drill (2.3mmD) Drill Extender Multi-Setting Torque Wrench (15, 20, 25, 30, 35, 40, 45, 50 & 60Ncm) Analog Holder

Price $125.00 $125.00 $125.00 $100.00 $80.00 $15.00 $30.00 $40.00 $395.00 $85.00

Ancillary Instruments

Code R TW30 TW35 SSH2.5 FMD PAR LDRILL DE TWM ABH

R

TW30

TW35

SSH2.5

FMD

PAR

LDRILL

DE

TWM

ABH

Surgical Trays

Code ST BST CST RST RBST RCST

Description Empty Surgical Kit for RePlus & ReActive System Implants Basic Surgical Kit for RePlus & ReActive System Implants Surgical Kit for RePlus & ReActive System Implants Empty Surgical Kit for RePlant System Implants Basic Surgical Kit for RePlant System Implants Surgical Kit for RePlant System Implants

Price $250.00 $1265.00 $2565.00 $350.00 $1495.00 $2105.00

ST

BST

CST

RST

RBST

RCST

25


S u r g i c a l D r i l l s : R e P l u s a n d R e A c t i ve I m p l a n t s SD2.3

3.0mmD Implants

Code SD2.3 SD2.3S SD2.8 SD2.8S CBD3.2

Description 2.3/2.0mmD Step Drill with 6-16 markings 2.3/2.0mmD Step Drill with 6-10 markings 2.8/2.3mmD Step Drill with 6-16 markings 2.8/2.3mmD Step Drill with 6-10 markings Cortical Bone Drill for 3.0 and 3.2mmD Implants

Description 3.4/2.8mmD Step Drill with 6-16 markings 3.4/2.8mmD Step Drill with 6-10 markings Cortical Bone Drill for 3.7mmD Implants

Description 3.8/3.4mmD Step Drill with 6-16 markings 3.8/3.4mmD Step Drill with 6-10 markings Cortical Bone Drill for 4.2mmD Implants

Description 4.4/3.8mmD Step Drill with 6-16 markings 4.4/3.8mmD Step Drill with 6-10 markings Cortical Bone Drill for 4.7mmD Implants

Description 4.8/4.4mmD Step Drill with 6-16 markings 4.8/4.4mmD Step Drill with 6-10 markings Cortical Bone Drill for 5.2mmD Implants

26

Description 5.1mmD Straight Drill with 6-16 markings 5.1mmD Straight Drill with 6-10 markings 5.4/4.8mmD Step Drill with 6-16 markings 5.4/4.8mmD Step Drill with 6-10 markings Cortical Bone Drill for 5.7mmD Implants

CBD3.7

SD3.8

SD3.8S

CBD4.2

SD4.4

SD4.4S

CBD4.7

SD4.8

SD4.8S

CBD5.2

D5.1S

SD5.4

SD5.4S

Price $60.00 $60.00 $60.00

D5.1

5.7mmD Implants

Code D5.1 D5.1S SD5.4 SD5.4S CBD5.7

SD3.4S

Price $60.00 $60.00 $60.00

Optional Drills

Code SD4.8 SD4.8S CBD5.2

SD3.4

CBD3.2

Price $60.00 $60.00 $60.00

4.7mmD Implants

Code SD4.4 SD4.4S CBD4.7

SD2.8S

Price $60.00 $60.00 $60.00

Optional Drills

Code SD3.8 SD3.8S CBD4.2

SD2.8

Price $60.00 $60.00 $60.00 $60.00 $60.00

3.7mmD Implants

Code SD3.4 SD3.4S CBD3.7

SD2.3S

Price $60.00 $60.00 $60.00 $60.00 $60.00

CBD5.7


R e P l u s a n d R e A c t i ve D r i l l S e q u e n c e 3.7mmD RePlus & ReActive Tapered Implant Soft Bone Final

Dense Bone Final

Optional Bone Contour

CBD3.7

SD2.3

SD2.8

SD3.4

2.3/2.0mmD

2.8/2.3mmD

3.4/2.8mmD

Soft Bone Final

Dense Bone Final

Optional Bone Contour

CBD4.2

4.2mmD RePlus & ReActive Tapered Implant Optional

SD2.3

SD2.8

SD3.4

SD3.8

2.3/2.0mmD

2.8/2.3mmD

3.4/2.8mmD

3.8/3.4mmD

Soft Bone Final

Dense Bone Final

Optional Bone Contour

CBD4.7

4.7mmD RePlus & ReActive Tapered Implant Optional

SD2.3

SD2.8

SD3.4

SD3.8

SD4.4

2.3/2.0mmD

2.8/2.3mmD

3.4/2.8mmD

3.8/3.4mmD

4.4/3.8mmD

Soft Bone Final

Dense Bone Final

Optional Bone Contour

CBD5.7

5.7mmD RePlus & ReActive Tapered Implant Optional

Optional

Optional

SD2.3

SD2.8

SD3.4

SD3.8

SD4.4

SD4.8

D5.1

SD5.4

2.3/2.0mmD

2.8/2.3mmD

3.4/2.8mmD

3.8/3.4mmD

4.4/3.8mmD

4.8/4.4mmD

5.1mmD

5.4/4.8mmD

27


28 HD2.5

HT2.5S

HT2.5

SSH2.5

HD2.0

HD1.25

FMD

R

HT2.0S

HT1.25S

HT2.0

SD2.8S CBD3.2

THT1.25S

SD2.8

HT1.25

SD2.3S

THT1.25

SD2.3

HD3.0

HT3.0S

HT3.0

SD3.4 SD3.8

SD3.8S CBD4.2

Lower level of surgical tray

SD3.4S CBD3.7 SD4.4

SD4.4S CBD4.7 SD4.8

D5.1S

PAR (4)

DE

SD5.4S CBD5.7

D5.1

LDRILL

SD5.4

SD4.8S CBD5.2

C o m p l e t e S u r g i c a l Tr ay C o n t e n t s


S u r g i c a l Tr ay

Lid

Code ST SD2.3 SD2.3S SD2.8 SD2.8S CBD3.2 SD3.4 SD3.4S CBD3.7 SD3.8 SD3.8S CBD4.2 SD4.4 SD4.4S CBD4.7 SD4.8 SD4.8S CBD5.2 D5.1 D5.1S SD5.4 SD5.4S CBD5.7 THT1.25 THT1.25S HT1.25 HT1.25S HT2.0 HT2.0S HT2.5 HT2.5S HT3.0 HT3.0S HD1.25 HD2.0 HD2.5 HD3.0 FMD LDRILL DE R PAR (x4) SSH2.5

Surgical Tray Contents Description Empty Surgical Tray 2.3/2.0mmD Step Drill-Long 2.3/2.0mmD Step Drill-Short 2.8/2.3mmD Step Drill-Long 2.8/2.3mmD Step Drill-Short 3.2mmD Cortical Drill 3.4/2.8mmD Step Drill-Long 3.4/2.8mmD Step Drill-Short 3.7mmD Cortical Drill 3.8/3.4mmD Step Drill-Long 3.8/3.4mmD Step Drill-Short 4.2mmD Cortical Drill 4.4/3.8mmD Step Drill-Long 4.4/3.8mmD Step Drill-Short 4.7mmD Cortical Drill 4.8/4.4mmD Step Drill-Long 4.8/4.4mmD Step Drill-Short 5.2mmD Cortical Drill 5.1mmD Straight Drill-Long 5.1mmD Straight Drill-Short 5.4/4.8mmD Step Drill-Long 5.4/4.8mmD Step Drill-Short 5.7mmD Cortical Drill Hex Tools 1.25mmD Tapered Hex Tool-Long 1.25mmD Tapered Hex Tool-Short 1.25mmD Straight Hex Tool-Long 1.25mmD Straight Hex Tool-Short 2.0mmD Hex Tool-Long 2.0mmD Hex Tool-Short 2.5mmD Hex Tool-Long 2.5mmD Hex Tool-Short 3.0mmD Hex Tool-Long 3.0mmD Hex Tool-Short 1.25mmD Hex Drill 2.0mmD Hex Drill 2.5mmD Hex Drill 3.0mmD Hex Drill Ancillary Instrumentation Fixture Mount Drill Locator Drill Drill Extender Ratchet Paralleling Tool 2.8/2.3 2.5mmD Stainless Steel Handle

Empty Tray

Inside

Price $250.00 $60.00 $60.00 $60.00 $60.00 $60.00 $60.00 $60.00 $60.00 $60.00 $60.00 $60.00 $60.00 $60.00 $60.00 $60.00 $60.00 $60.00 $60.00 $60.00 $60.00 $60.00 $60.00

Complete Kit $2,565.00 X X X X X X X X X X X X X X X X X X X X X X X

Basic Kit $1,265.00 X X

$40.00 $40.00 $40.00 $40.00 $40.00 $40.00 $40.00 $40.00 $40.00 $40.00 $40.00 $40.00 $40.00 $40.00

X X X X X X X X X X X X X X

X

$80.00 $30.00 $40.00 $125.00 $60.00 $100.00

X X X X X X

Conversion Kit $930.00 X

X X X X

X X X X

X X

X X X X

X X X

X X X X X X X X X X X X 29


S u r g i c a l D r i l l s : R e p l a n t ® a n d N o b e l R e p l a c e ™ Ta p e re d G ro ov y I m p l a n t s SD2.3

SD2.3S

RSB3

RSB3S

RSB4

RSB4S

RSB5

RSB5S

RSB6

RSB6S

RDB3

RDB4

RDB5

RDB6

RTT3

RTT4

RTT5

RTT6

RTD3

RTD4

RTD5

RTD6

Pilot Drills for all Implants

Code SD2.3 SD2.3S

Description 2.3/2.0mmD Step Drill with 6-16 markings 2.3/2.0mmD Step Drill with 6-10 markings

Price $60.00 $60.00

Soft Bone Drills

Code RSB3 RSB3S RSB4 RSB4S RSB5 RSB5S RSB6 RSB6S

Description 2.8/2.3mmD Step Drill for 3.5mmD Implant 2.8/2.3mmD Short Step Drill for 3.5mmD Implant 3.4/2.8mmD Step Drill for 4.3mmD Implant 3.4/2.8mmD Short Step Drill for 4.3mmD Implant 4.2/3.3mmD Step Drill for 5.0mmD Implant 4.2/3.3mmD Short Step Drill for 5.0mmD Implant 5.1/4.2mmD Step Drill for 6.0mmD Implant 5.1/4.2mmD Short Step Drill for 6.0mmD Implant

Price $60.00 $60.00 $60.00 $60.00 $60.00 $60.00 $60.00 $60.00

Dense Bone Drills

Code RDB3 RDB4 RDB5 RDB6

3.2mmD 4.0mmD 4.7mmD 5.7mmD

Dense Dense Dense Dense

Description Bone Drill for Bone Drill for Bone Drill for Bone Drill for

Stainless Stainless Stainless Stainless

Steel Steel Steel Steel

Tri-Lobe Tri-Lobe Tri-Lobe Tri-Lobe

30

Stainless Stainless Stainless Stainless

Steel Steel Steel Steel

Price $60.00 $60.00 $60.00 $60.00

Description Insertion Tool Insertion Tool Insertion Tool Insertion Tool

for for for for

3.5mmD 4.3mmD 5.0mmD 6.0mmD

Implant Implant Implant Implant

Price $60.00 $60.00 $60.00 $60.00

Latch head connection for use with Surgical Motor

RePlant Insertion Drills

Code RTD3 RTD4 RTD5 RTD6

Implant Implant Implant Implant

Square connection for use with Ratchet or Torque Wrench

RePlant Insertion Tools

Code RTT3 RTT4 RTT5 RTT6

3.5mmD 4.3mmD 5.0mmD 6.0mmD

Tri-Lobe Tri-Lobe Tri-Lobe Tri-Lobe

Description Insertion Drill Insertion Drill Insertion Drill Insertion Drill

for for for for

3.5mmD 4.3mmD 5.0mmD 6.0mmD

Implant Implant Implant Implant

Price $60.00 $60.00 $60.00 $60.00


RePlant Drill Seque nce 3.5mmD RePlant Straight / Tapered Implant Soft Bone Final

Dense Bone Final

SD2.3

RSB3

RDB3

2.3/2.0mmD

2.8/2.3mmD

3.2mmD

Soft Bone Final

Dense Bone Final

4.3mmD Straight / Tapered Implant Optional

SD2.3

RSB3

RSB4

RDB4

2.3/2.0mmD

2.8/2.3mmD

3.4/2.8mmD

4.0mmD

Optional

Soft Bone Final

Dense Bone Final

5.0mmD Straight / Tapered Implant

SD2.3

RSB3

RSB4

RSB5

RDB5

2.3/2.0mmD

2.8/2.3mmD

3.4/2.8mmD

4.2/3.3mmD

4.7mmD

Soft Bone Final

Dense Bone Final

6.0mmD Straight / Tapered Implant Optional

SD2.3

RSB3

RSB4

RSB5

RSB6

RDB6

2.3/2.0mmD

2.8/2.3mmD

3.4/2.8mmD

4.2/3.3mmD

5.1/4.2mmD

5.7mmD

31


32

LDRILL

HD1.25 HD2.5

SD2.3 SD2.3S

RTT3

THT1.25

RSB3 RDB3

RTT4

THT1.25S

RSB3S

RTT5

HT1.25

RSB4

RTT6

HT1.25S

RSB4S RDB4

DE

FMD

RSB5

RSB5S RDB5

SSH2.5

RSB6S

RDB6

R

PAR (Quantity of 4)

RSB6

S u r g i c a l Tr ay f o r R e p l a n t ® a n d N o b e l R e p l a c e ™ Ta p e re d G ro ov y I m p l a n t s


S u r g i c a l Tr ay s - R e P l a n t C o m p l e t e , B a s i c a n d U p g r a d e K i t

Lid

Code RST SD2.3 SD2.3S RSB3 RSB3S RSB4 RSB4S RSB5 RSB5S RSB6 RSB6S RDB3 RDB4 RDB5 RDB6 THT1.25 THT1.25S HT1.25 HT1.25S HD1.25 HD2.5 RTT3 RTT4 RTT5 RTT6 FMD LDRILL DE R PAR (x4) SSH2.5

Surgical Tray Contents Description Empty Surgical Tray 2.3/2.0mmD Step Drill-Long 2.3/2.0mmD Step Drill-Short 2.8/2.3mmD Step Drill for 3.5mmD Implant 2.8/2.3mmD Short Step Drill for 3.5mmD Implant 3.4/2.8mmD Step Drill for 4.3mmD Implant 3.4/2.8mmD Short Step Drill for 4.3mmD Implant 4.2/3.3mmD Step Drill for 5.0mmD Implant 4.2/3.3mmD Short Step Drill for 5.0mmD Implant 5.1/4.2mmD Step Drill for 6.0mmD Implant 5.1/4.2mmD Short Step Drill for 6.0mmD Implant Dense Bone Drills 3.2mmD Dense Bone Drill for 3.5mmD Implant 4.0mmD Dense Bone Drill for 4.3mmD Implant 4.7mmD Dense Bone Drill for 5.0mmD Implant 5.7mmD Dense Bone Drill for 6.0mmD Implant Hex Tools 1.25mmD Tapered Hex Tool-Long 1.25mmD Tapered Hex Tool-Short 1.25mmD Straight Hex Tool-Long 1.25mmD Straight Hex Tool-Short 1.25mmD Hex Drill 2.5mmD Hex Drill Tri-Lobe Insertion Instruments Tri-Lobe Insertion Tool for 3.5mmD Implant Tri-Lobe Insertion Tool for 4.3mmD Implant Tri-Lobe Insertion Tool for 5.0mmD Implant Tri-Lobe Insertion Tool for 6.0mmD Implant Insertion Instruments Fixture Mount Drill Locator Drill Drill Extender Ratchet Paralleling Tool 2.8/2.3 2.5mmD Stainless Steel Handle

Inside

Price $350.00 $60.00 $60.00 $60.00 $60.00 $60.00 $60.00 $60.00 $60.00 $60.00 $60.00

Empty Tray

Complete Kit Basic Kit Upgrade Kit $2,105.00 $1,495.00 $610.00 X X X X X X X X X X X X X X X X X X X X X X

$60.00 $60.00 $60.00 $60.00

X X X X

X X X X

$40.00 $40.00 $40.00 $40.00 $40.00 $40.00

X X X X X X

X

$60.00 $60.00 $60.00 $60.00

X X X X

X X X X

$80.00 $30.00 $40.00 $125.00 $60.00 $100.00

X X X X X X

X

X X X X X

X X X X X 33


www.implantdirect.com Implant Direct Sybron International 1-818-444-3333 • 1-888-NIZNICK

ReActive™ Tri-Lobe Implant ††

Platform Shifting, Micro-threads , Deeper Threads and Round Apex. All-in-one Packaging Includes: Cover Screw, Transfer and Straight Abutment. ReActive USA price = $200 **NobelActive USA price = $694

Gerald Niznick, DMD,MSD, Founder and President of Implant Direct

T hree Implant Designs and Packaging Options Prosthetically Compatible to NobelReplace Implant Implants include Cover Screw Select Implant based on Price, Packaging and Thread Design 1. RePlant: $150 incudes Temporary Abutment/Transfer 2. RePlus: $175 includes “Snappy” Abutment/Transfer 3. ReActive: $200 includes Preparable Abutment/Transfer

*

RePlant® *

RePlus®

ReActive™

Body Dimensions Matches Replace†

Body Taper For Bone Expansion

Buttress Threads For Increased Surface

RePlant implant surgically compatible with NobelReplace® Drills

o Compare Straight Laboratory 15 Angled US Contoured Abutment Contoured List Price

FREE Introductory Offers at www.implantdirect.com Terms and Conditions Apply †

NobelReplace® and **NobelActive® are registered trademarks of Nobel Biocare

††

Stig Hansson. The Implant Neck: Smooth or Provided with Retention Elements. A Biomechanical Approach. Clin Oral Impl Res 1999:10:394-405

Straight Snap-On

Gold/ Plastic

Plastic Zirconia Ball GPS™ Temporary Attachment Attachment Abutment Abutment

Multiple-Unit w / Cap & Transfer Straight Angled

Implant Direct

$85

$75

$85

$85

$100

$120

$35

$107

$100

$85

$100

Nobel Biocare

$170

$145

$225

$201

$216

$285

$72

$217

$155

$229

$274

Cost Savings

50%

48%

62%

58%

54%

58%

51%

51%

35%

63%

64%

List prices as of April 2010

10K-12-10-0044