How Installing A Decent Telescope And Marlin Scope Mounts To Your Handgun Will Have You Geared And R

How Installing A Decent Telescope And Marlin Scope Mounts To Your Handgun Will Have You Geared And Ready For The Sport Of Handgun Hunting In No Time Handgun hunting has been actively practiced in several countries for many years, but it is still relatively unknown, especially to most hunters and some gun shop owners. People mistakenly think a handgun hunter is someone who wants to drop the animal in the hunting field with a 9mm pistol, but this is not entirely the case and ignorance is a huge obstacle. Getting started on your own as a handgun hunter is quite a challenge and advice on the right calibers and patterns differ from person to person.

Weapons used for handgun hunting are mostly long-range revolvers and pistols with barrels ranging from about 6 inches to as long as 14 inches and sometimes linger, including the .444 Marlin. With a telescope mounted, you can reach a shooting distance of 60 to 80m with a Marlin. If you are going to start handgun hunting, think about starting with smaller calibers and first practice on small game species and birds, such as pigeons and guinea fowl.

Be aware that many revolvers also do not provide for telescopic mounts at all, so you will need to enlist the help of a good gunsmith or scope mount manufacturer. A special bridge must be built (or an existing one must be modified). Taurus revolvers, for example, have a rib on the barrel and Taurus has therefore developed a special mount that fits on this bridge. It is expensive to import such a bridge, but a gunsmith worth his salt should be able to make such a thing.

It is advisable to still bolt the bridge on the weapon as well after two holes have been drilled (and tapped) through the upper part of the rib. The clamps provided with the factory assembly are inadequate and kicking back will loosen the assembly, and once again it is recommended that you seek expert advice and guidance, especially if you are looking for Marlin scope mounts.

It is also recommended that you apply an open mind before permanently settling on handgun hunting and attaching your Marlin scope mount, as it may prove expensive.

It is also advisable to use 3 to 4 rings to clamp the Marlin scope mounts well so that they do not slide into the rings. It sounds far-fetched, but hunters are often surprised by how such a weapon in a .44 power could loosen the telescope and rings over time if they did not take sufficient precautions. It could suddenly happen that your weapon starts firing around, and that is the last thing any hunter wants to experience on the hunting ground.

If you tend to like handgun hunting and want to aim for bigger animals like giraffes and elk, buy a larger caliber revolver like the .444 Marlin, for which you can order custom and precision

made Marlin scope mount. However, if you're just looking for a weapon you want to carry with you when you go hunting with your rifle (in case you get close enough to a buck for a safe shot with your handgun) the .357 Magnum might be a better option.

It is a much lighter weapon of around 1.3kg and therefore no unnecessary weight to carry. If you load the .357 Magnum with 180gr bullets, it has enough killing ability to hunt large antelopes at a short-range.

If you decide to equip your handgun for hunting purposes with a telescope, keep in mind the huge kickback of large-bore handguns. The telescope must be able to double the normal recoil of large-caliber hunting rifles and your Marlin scope mounts, for example, must be machine manufactured for precision.

You can get small arms telescopes from the big, well-known arms dealers who can take such blows, but a bigger and more expensive telescope will do a better job. If you want to mount your telescope, consult a good manufacturing company or gunsmith, and get the right mounts to secure it. The bolts of your mounting could break off easily if there is a clearance or if the bolts are too thin.

It is also advisable to use three to four rings to hold your telescope, otherwise, your telescope slides into the ring. You will find many reputable design and manufacturing companies that are well-equipped to enhance the performance of your handgun with custom made scope mounts.

It is important to do your research first and only settle for a company that comes highly recommended by seasoned hunters.

About Us: DNZ Products is a family-owned and operated company situated in Sanford, North Carolina. They design and manufacture high-quality scope mounts and related products. At DNZ Products they take pride in the scope mounts they manufacture and make available to all hunting and gun enthusiasts. They always believe in accuracy and therefore their products can be trusted to deliver maximum results. Their 1-piece and 2-piece scope mounts are ideal for a range of different rifles and will therefore suit the needs of a great number of gun enthusiasts.

Their scope mounts are made from the highest quality solid billet aluminum to ensure maximum shock absorption. Their products stand out above the rest and they constantly receive positive feedback from satisfied customers. For more information, visit their website at https://www.dnzproducts.com.