How to Configure D-Link DAP 1325? D-link DAP 1325 extender setup and configuration via WPS: To configure the D-link extender, you need to set up the extender to connect to the uplink or source network. Most convenient way is through a one-touch setup using a WPS button.
For D-link WPS configuration, your uplink router or access point must feature and support a WPS button. ● ● ● ● ● ● ●
Ensure that the status or WPS LED on the D-link DAP 1325 extender blinks amber light. Push the WPS button on the uplink router or the access point on the uplink network. Simultaneously, within the next few seconds, push the WPS button on the D-link DAP 1325 extender. As the network connection starts to establish, the WPS LED flashes green light. Allow the D-link DAP 1325 extender to finish connecting to the uplink network. The status LED turns solid green when the connection is successfully completed. D-link DAP 1325 extender is configured and could be used as a wireless repeater.
Note: The smart signal WPS LED gives an indication of connection status. A single amber LED bar indicates poor connection after configuration. The more lit LED signal bars indicate good connection. Thereby, to improve the quality of the network connection, position your D-link DAP 1325 extender to an optimized location.