Case IH L725 L735 L745 L755 L765 L775 L785 L795 Farm Loader Operator’s Manual Instant Download (Publ

Part number 84559800

1st edition English

(Ref

1 - GENERAL INFORMA TION

Note the Owner

This manual contains information concerning the adjustment and maintenance your new Y have purchased a dependable machine, but only proper care and operation can you expect receive the performance and long service built into this Please have all operators read this manual carefully and keep available for ready

Y our CASE AGRICUL TURE dealer will instruct you the general operation your new (Refer the the back this Y our staf f factory - trained service technicians will glad answer any questions that may arise regarding the operation your machine. Case Max Service also available. Call 1 - 877 - 4CASEIH - 877 - 422 - 7344) email

Y our CASE AGRICUL TURE dealer carries a complete line genuine CASE AGRICUL TURE service parts. These parts are manufactured and carefully inspected insure high quality and accurate fitting any necessary placement prepared give your dealer the model and product identification number your new equipment when ordering Locate these numbers now and record them below Refer the section this manual for the location the model and product identification numbers your

PLEASE RECORD THE FOLLOWING INFORMA TION

Loader Model

Product Identification Number (PIN)

Date Purchased

Attachment Model

Attachment Model

This the safety alert used with and without signal words alert you potential personal injury Obey all safety messages that follow this symbol avoid possible death injury .

W ARNING

Illustrations this manual may show protective shielding open removed better illustrate a particular feature

Replace all shields before operating the machine. Failure comply could result death serious injury . W0012A

IMPROVEMENTS

CNH America LLC continually striving improve its W e reserve the right make improvements changes when becomes practical and possible without incurring any obligation make changes tions the equipment sold previously

Intended use

The loader was designed mount CASE CUL TURE approved The loader designed load and move materials with a variety buckets and proved CASE AGRICUL TURE

NOT use this machine for any purpose any ner other than described the other product safety information provided with the chine. These materials define the s intended

Use only approved accessories and attachments signed for your Consult your dealer additions modifications that may required for your not make any unauthorized modifications your machine.

Installation and operation instructions for certain hydraulic valve sets, attachments and accessories may not cluded this operator ’ s Use the publication ceived with the specific item the case hydraulic refer the tractor operator ’ s

NOTICE: Loader frames are designed for specific tor not install a loader frame a different model than specified, without obtaining approval from CNH America

Operator ’ s age

All persons who will operating this machine shall sess a valid local vehicle operating permit and / other applicable local age work permits.

W ARNING

- instructed the safe and proper use this machine.

- reads and understands the manual for this machine.

- reads and understands ALL safety signs the Failure comply could result death serious injury

W0188A

Read and thoroughly understand this manual before erating this you are inexperienced tor , study this manual and receive operating instructions from experienced operator . Y our dealer can assist you learning machine operation and show you proper operating Keep this manual readily preferably with the the original manual order a new one from your dealer

IMPROPER OPERA TION THIS MACHINE CAN CAUSE DEA SERIOUS INJUR Y . MAKE SURE THA T EVER Y OPERA T OR:

GENERAL INFORMA TION

International symbols

a guide the operation the various universal symbols have been utilized the and fuse The symbols are shown below with indication their

Product Identification

Product identification plate

A product identification plate (1) located the inside the left - hand loader 20105780

The identification numbers this plate are important the event that your loader should require future

The plate specifies:

Product Identification Number and Production

The loader product identification number (PIN) and production must always quoted during service questions when spare parts are

Machine orientation

Alignment reference

this manual, references right - hand and left - hand are consistently seen from the operator ’ s seat when facing

NOTE: Some illustrations this manual may show a different model tractor loader , compared with your loader The same information applies your equipment unless otherwise specified.

93105807 1

Left - hand view

Definition

Description

3rd function

• Optional hydraulic function for operating the ment

Bucket level indicator

• Device that indicates the angular position the plement during lifting and lowering

Control valve

• V alve designed for controlling the operation the loader

Central control valve

• Central distribution mounted the loader cross tube which has the capability accommodate hydraulic

(Multi Coupler Fast Snap Style)

• Multi port hydraulic connection for coupling and coupling the loader ’ s

Hose kit

• Hoses and hydraulic components for connecting the loader the original remote

Soft - ride loader suspension

• Load damper , improves driver comfort and reduces stress the tractor and loader when driving rough surface

SSL

• Attachments and loader attaching plate that patible with approved skid steer loader

EURO

• Attachments with hooks and loader tool carrier connection Designed for international standard

2 - SAFETY INFORMA TION

Safety rules and signal word definitions

Personal safety

This the safety alert used alert you potential personal injury Obey all safety messages that follow this symbol avoid possible death injury

Throughout this manual and machine you will find the signal words W and CAUTION followed special instructions. These precautions are intended for the personal safety you and those working with

Read and understand all the safety messages this manual before you operate service the machine.

DANGER indicates a hazardous situation not will result death serious injury The color associated with DANGER

W

ARNING indicates a hazardous situation not could result death serious injury

The color associated with W ARNING

used with the safety alert indicates a hazardous situation not could result minor moderate injury . The color associated with CAUTION YELLOW .

F AILURE T O FOLLOW DANGER, W ARNING, AND CAUTION MESSAGES COULD RESUL T DEA SERIOUS INJUR Y .

Machine safety

NOTICE: Notice indicates a situation not could result machine property The color associated with Notice

Throughout this manual you will find the signal word Notice followed special instructions prevent machine property The word Notice used address practices not related personal safety

Information

NOTE: Note indicates additional information which clarifies other information this

Throughout this manual you will find the word Note followed additional information about a other information the The word Note not intended address personal safety property

Safety rules - Personal safety

Carefully study these precautions, and those included the external attachment operators manual, and insist that they followed those working with and for you.

Thoroughly read and understand this manual and the attachment Operator ’ s Manual before operating this any other

sure all people and pets are clear the machine before Sound the three times before starting

Only the operator should the machine when operation. Never allow anyone climb the machine while the machine equipped with Instructors this must only used for training Passengers must not allowed use the Instructors

bility This especially important when operating hilly conditions / when using heavy

Always lower the attachment, shut f the engine, set the parking engage the transmission remove the key and wait for all machine movement stop before leaving the operators

10. the attachment machine should become structed plugged; set the parking shut f the engine and remove the key , engage the mission wait for all machine attachment motion come a before leaving the tors platform removing the obstruction plug.

Keep all shields place. Never work around the machine any the attachments while wearing loose clothing that might catch moving

Observe the following precautions whenever cating the machine making

• Disengage all clutching levers

1 Never disconnect make any adjustments the hydraulic system unless the machine and / the tachment lowered the ground the safety lock(s) the engaged

12. Use the flashing lights highly recommended when operating a public

13. When transporting a road highway , use sory lights and devices for adequate warning the operators other this check local government V arious safety lights and devices are available from your CASE AGRICUL TURE dealer

• Lower the the ground raise the attachment completely and engage the cylinder safety Completing these tions will prevent the attachment from lowering unexpectedly

• Engage the parking

• Shut f the engine and remove the key

• W ait for all machine movement stop before leaving the operators

Always keep the machine gear while travelling

The machine should always equipped with suf cient front rear axle weight for safe

Under some field more weight may required the front rear axle for adequate

Practice safety 365 days a year

Keep all your equipment safe operating Keep all guards and safety devices

Always set the parking shut f the engine and remove the key , engage the transmission wait for all machine attachment motion come a stop, before leaving the operators platform service the machine and

Remember: A careful operator the best insurance against

Extreme care should taken keeping hands and clothing away from moving parts.

Personal safety

A careful operator the best operator . Most accidents can avoided observing certain precautions. T o help prevent read the following precautions before operating this Equipment should operated only those who are responsible and instructed

Carefully review the procedures given this manual with all important that all operators familiar with and follow safety

General

The loader

Read the Manual carefully before using the tractor loader Lack operating knowledge can lead

Replace damaged illegible safety decals. See the Specifications section this manual for quired

Operate the tractor and loader only from the

The tractor

Use approved roll bar and seat belt for safe Overturning a tractor without a roll bar can sult death injury your tractor not equipped with a roll bar and seat see your tractor dealer

Equip your tractor with FOPS (Falling Object tective Structure) and seat belts before installing operating the loader

Use the loader only a tractor with the ROPS stalled. Whenever possible, operate the tractor and loader with the ROPS the upright and locked sition and the seat belt fastened and correctly When operating restricted overhead vironment with the ROPS folded not wear the seat belt. Always return the ROPS the upright and locked position soon operating conditions

Add the recommended wheel ballast and / rear weight recommended the operator ’ s manual provide good stability .

Move the wheels the tractor widest recommended settings increase stability

Move and turn the tractor low

Improper use a loader can cause serious injury

not lift carry anybody the loader the bucket attachment.

Never allow anyone get under the loader bucket reach through the lift arms when the bucket

not walk work under a raised loader , attachment unless securely blocked held

A void overhead wires and obstacles when the loader Contacting electrical lines can cause

Make sure all dismounted loaders are a level

not repair , replace any parts the loader while the dismounted

Operating the loader

the loader responsibility certain that anyone operating the loader reads this manual first aware the safe way operating the loader

Exercise caution when operating the loader with a loaded bucket

A void loose fill, rocks, and holes. They can gerous for loader operation

Use care maintain proper stability when operating steep Always carry the bucket the lowest position

Allow for the loader length when making

Stop the loader arms gradually when lowering lifting.

Use caution when handling loose shiftable

1

Carry the bucket a low position during transport for better visibility

When parking lower the bucket the stop the and set the parking brakes before leaving the tractor seat.

Operate the loader controls only when properly seated the controls.

Using front end loaders without special attachments for handling large heavy objects such large round rectangular and oil drums NOT

12. Handling large heavy objects can extremely gerous due to:

• danger rolling the tractor over

• danger upending the tractor

• danger the object rolling sliding down the loader arms onto the operator

you must perform this sort work (see #12 above), protect yourself by:

• using the proper

• never lifting the load higher than necessary clear the ground when

• ballasting the tractor rear compensate for the

• never lifting large objects with equipment that does not have anti - rollback

• moving slowly and carefully , avoiding rough terrain.

Loader lift capacity and break - away capacity diminish the loader height Use care not grasp more material than the loader designed

Maintenance

When servicing replacing the pins the der always use a drift and mer Failure could result injury from flying metal not modify alter , permit anyone else ify alter , the loader any its components any loader function without first consulting a CASE AGRICUL TURE dealer you have any tions regarding loader contact your dealer

Always wear safety goggles when servicing pairing the

Escaping hydraulic / diesel fluid under pressure can penetrate the causing serious injury

• NOT use your hand check for

• Use a piece cardboard paper search for

• Stop the engine and relieve the pressure fore connecting disconnecting the hydraulic diesel

• T ighten all connections before starting the gine pressuring the

• any fluid injected into the obtain ical attention IMMEDIA TEL Y gangrene may result. not tamper with the relief valve The relief valve preset the factory Changing the setting can cause overloading the loader and tractor , and serious operator injury may

Shutoff mechanism

The loader equipped with a shutof f mechanism (1) cated the area the hydraulic couplers the right the loader

The handle should moved the horizontal position (2) during service when the loader left the lifted position for any length time for other reasons.

the loader equipped with a multi coupler (MC4) (3) , open the multi coupler (4) during service

W ARNING

Pressurized system!

NOT use the shutoff valve when working the loader hydraulic cylinders associated piping. these cases, you must lower the loader the

Failure comply could result death serious injury .

W ARNING

Pressurized system!

Before disconnecting the couplers, you must: - lower the connected - stop the engine, - move the control levers forward and ward discharge pressure from the hydraulic system.

Failure comply could result death serious injury .

This

the safety alert symbol. used alert you potential personal injury hazards. Obey all safety messages that follow this symbol avoid possible injury death.

INFORMA TION

Safety Decals

Safety signs are placed your machine a guide for your safety . W alk around the machine and note the content and location these decals before operating your machine

Following a listing Safety signs and locations. Read and understand them before operating the machine

Safety sign inspection and maintenance:

Cleaning Safety signs

Cleaning Safety signs

Use a soft water , and a gentle not use gasoline other harsh icals clean Safety and other harsh chemicals may damage remove Safety

Replace all Safety signs that are damaged, missing, painted over See your CASE CUL TURE dealer for replacement Safety a Safety sign a part that make sure the Safety sign installed the new

Universal informational Safety signs

Decals which display the Operator ’ s bol are intended direct the operator the Operator ’ s Manual for further information regarding and / procedures for particular areas the

When a Safety sign displays this symbol refer the appropriate page the Operator ’ s

Suggest:

If the above button click is invalid.

Please download this document first, and then click the above link to download the complete manual.

Thank you so much for reading

SAFETY INFORMA TION

Loader:

DANGER

T o avoid serious injury death from electrocution:

· Stay Clear Overhead Electric wires

DANGER

T o avoid serious injury death from rollovers:

· Use ROPS and seat belts all times.

· Add recommended rear

· not exceed the load weight limitations stated the loader Manual maintain tractor stability

· Move wheels widest recommended setting. Operate tractor low speeds with loader low

W ARNING

T o avoid injury death from falls: not work from allow riders loader its attachments.

W ARNING

T o avoid injury death caused falling loads:

· not handle round bales other large objects with loader unless approved round bale grapple other approved bale handling equipment

· Lockout optional valve detents.

· not handle loose shiftable loads with loader that are not contained bucket. Handle raised loads with caution.

· Carry loads low

W ARNING

not walk perform service under a raised loader .

Lower loader ground when parked.

· Before servicing adjusting equipment disconnecting oil lines: lower attachment ground support loader

shut off engine and relieve hydraulic pressure.

· Observe safety precautions Loader Operation and Maintenance Manual.

Quantity 1 LDR1 1 134765