CLAAS DOMINATOR 106 - 56 Combine Service Repair Manual Instant Download

r(j

REPAIR MANUAL

CLUB-

DOMINAIBB 108-58

GROUP INDEX 1 Specifications

2 Sectional View of Machine

3 Drive Schematic 4 Cutterbar

5 Threshing Mechanism 6 Elevators and Crop Delivery

7 Engine and Drives 8 Transmission and Chassis 9 Hydraulic System 10 Steering and Rear Axle 11 Electrical System 12 Auxiliary Equipment

Special Notes

1

Specificalills

DO 106 .... 56 1

SPECIFICATIONS

DOMINATOR 106 Technical data

1. 1

Weights

1. 4

Dimensions

1. 5

Settings and capacities

1. 7

DOMINATOR 96 Technical data

1. 9

Weights

1.12

Dimensions

1.13

Settings and capacities

1.15

DOMINATOR 86 Technical data

1.17

Weights

1.20

Dimensions

1.21

Settings and capacities

1.23

DOMINATOR 76 Technical data

1.25

Weights

1.28

Dimensions

1.29

Settings and capacities

1.31

DOMINATOR 66 Technical data

1.33

Weights

1.36

Dimensions

1.37

Settings and capacities

1.39

DOMINATOR 56 Technical data

1.41

Weights

1.44

Dimensions

1.45

Settings and capacities

1.47

DO 106 . .,. ,.56 SPECIFICATIONS DOMINATOR 106 Technical data, dimensions and weights are given as an indication only. CLAAS reserve the right to make changes in design and specifications at any time without previous notice and rejects all responsibility in case of errors.

To be sure, always compare settings and filling' capacities with specifications stated in the appropriate Operator's Manual for the machine concerned.

NOTE: Front, rear, right and left refer to direction of travel.

Cutterbar Cutting widths

3.90 m 4.50 m 5.10 m 5.70 m 6.60 m 7.50 m (13ft) (15ft) t 17ft) (19ft) (22ft) (25ft)

Height adjustment

hydraulic

Cutting height range

from 360 mm (14 1/4 in) below ground level to 1300 mm (51 1/4 in) above ground level.

Clearance height under cutterbar skid

with floatation springs in use with floatation springs blocked

Reel drive

belt-operated variable speed drive

Reel height adjustment

hydraulic

Feeder house

chain-type feed rake

Cutterbar clutch

hydraulic

950 mm (37 112 in) 1100 mm (43 1/2 in)

Threshing Equipment Stone trap

standard equipment

Concave

adjustable from operator's platform rear of concave separately adjustable (2nd lever) width 1580 mm (621/4 in), 12 bars

Disawning

disawning plates underneath the concave, two and three disawning plates can be engaged separately

Threshing drum

width 1580 mm (62 1/4 in) diameter 450 mm (17 3/4 in) six rasp bars, seven drum discs speed infinitely variable from 650 to 1500 1/min (rpm) Optional: a) step pulley drive - 750, 1000, 1200, 1500 1Imin (rpm) b) slow-speed threshing drum drive kit (chain drive) from 290 to 680 1/min (rpm)

Threshing mechanism clutch

hydraulic

1.1

00 106 .... 56 SPECIFICATIONS DOMINATOR 106 Straw Walkers Type

step type walkers and intensive separation system (crankshaft with tines)

No. of walker racks

six

No. of walker crankshafts

two

Speed of walker crankshafts

220_5 1/min (rpm)

No. of tine crankshafts

two

No. of tines per crankshaft

six

Walker area

7.00 m 2 (10 850 sq in)

Separating area

7.95m 2 (12322sqin)

Cleaning Type

forced air cleaning fan

Wind volume control

by infinitely variable fan speed additional fan shutters (optional)

Total cleaning area

5.10 m 2 (7905 sq in)

Grain tank Capacity

6500 litres (178.75 U. K. bushels; 184.6 U.S. bushels)

Unloading tube

hydraulically operated position control

Engines

Mercedes DM 401.901

Cubic capacity

10455 cm 3 (638 in 3 )

Max. speed l/min (rpm)

2390

Idle speed 1/min (rpm)

1150

kW (DIN H.P.)

151 (205)

Cooling

water

Fuel tank capacity

300 litres (66 Imp. gal, 79 U.S. gaU

Battery

12 Volt, 143 Ah

1.2

00 106 .... 56 SPECIFICATIONS DOMINATOR 106

Ground drive

hydrostatic, controlled by lever on operator's platform

Transmission

three gear ranges in either forward or reverse 1. and 2. gear range for field operations 3. gear range for road travel

Ground speeds in kilometers per hour

on 23.1-26 R1 / 18.4-34 R1 tyres

Forward travel

1. from 0 to 6.1 km/h (from 0 to 7.7 km/h) 2. from 0 to 8.9 km/h (from 0 to 11.1 km/h) 3. from 0 to 20.0 km/h (from 0 to 25.5 km/h)

Reverse travel

1. from 0 to 4.6 km/h (from 0 to 5.8 km/h) 2. from 0 to 6.6 km/h (from 0 to 8.8 km/h) 3. from 0 to 15.3 km/h (from 0 to 19.0 km/h)

Ground speeds in miles per hour

on 23.1-26 R1 / 18.4-34 R 1 tyres 1. from 0 to 3.8 mph (from 0 to 4.8 mph) 2. from 0 to 5.5 mph (from 0 to 6.9 mph) 3. from 0 to 12.4 mph (from 0 to 15.8 mph) 1. from 0 to 2.9 mph (from 0 to 3.6 mph) 2. from 0 to 4.1 mph (from 0 to 5.5 mph) 3. from 0 to 9.5 mph (from 0 to 11.8 mph)

Forward travel

Reverse travel

Figures in brackets are only applicable for certain countries.

In countries with a speed limit of 20 km/h (12.4 mph) for self-propelled machinery of husbandry, the hydrostatic drive system incorporates a device that limits the ground speed accordingly.

Traction Wheel Drive

via final drive gears in oil bath

Steering

hydrostatic

Brakes

Foot brake

hydraulic, designed to work independently when the pedal lock is removed

Hand brake

mechanical, independent of foot brakes

Tyres and Tyre Pressures tyre size

maximum tyre pressure bar (psi)

18.4-3414PR 23.1-26 14 PR 28.1-26 12 PR 30.5-32 12 PR 14.5/75-20 8 PR

3.3 (48) 2.5 (36) 1.8 (26) 1.5 (22)

-

maize picker head six-row five-row four-row bar (psi) bar (psi)

2.5 (36) 1.8 (26) 1.2 (17) 3.0 (43)

3.2 (46) 2.3 (33) 1.7 (25) 1.1 (16) 3.0 (43)

minimum tyre pressure grain cutterbar 7.50 m 6.60 m 5.70 m 5.10 m 4.50m 3.90m (25 ft) (22 ft) (19 ft) (17 ft) (15 ft) (13 ft) bar (psi) bar (psi) bar (psi) 3.2 (46) 2.3 (33) 1.7 (25) 1.1 (16) 3.0 (43)

3.0 (43) 2.1 (30) 1.6 (23) 1.1 (16) 3.0 (43)

2.8 (41) 1.9 (27) 1.5 (22) 1.1 (16) 3.0 (43)

Where ground conditions allow maximum tyre pressure, the maximum tyre pressure should be maintained in order to obtain the longest possible service life of the tyre.

Torque Settings of Wheel Bolts and Wheel Nuts

Front wheels

wheel nuts with thrust piece H 22 DIN 74361-10 = 860 Nm (622 ft Ib)

Rear wheels

wheel bolts M 18 x 1.5 = 325 Nm (235 ft Ib)

1.3

DO 106 .... 56 SPECIFICATIONS DOMINATOR 106 Weights

Combine equipped with 18.4-34 Rl and 14.5/75-20 tyres, empty fuel tank and six cylinder engine: Determine the total weight of the machine by adding the weight of the equipment used on the combine to the weight of the basic machine.

Basic machine (without cutterbar)

9060 kg (19974 Ib)

With cutterbar and spring tine reel 3.90 m (13 ft) 4.50 m (15 ft) 5.10 m (17 ft) 5.70 m (19 ft)

add 960 kg ( 2116 Ib) add 1040 kg ( 2292 Ib) add 1120 kg ( 2469 Ib) add 1200 kg ( 2446 Ib)

With bat-type reel 6.60 m (22 ft) 7.50 m (25 ft) Two cpl. divider assemblies With straw chopper With four-row maize picker head With five-row maize picker head With six-row maize picker head With maize head stalk chopper With wheel weights (one set) With liquid ballast (magnesium chloride solution) filled into tyres With extra weights in compliance with road regulations (not for all countries)

add add add add add add add add add add add

1320 kg ( 2910 Ib) 1440 kg ( 3175 Ib) 50 kg ( 110 Ib) 284 kg ( 626 Ib) 1260 kg ( 2778 Ib) 151 0 kg ( 3329 Ib) 1740 kg ( 3836 Ib) 250 kg ( 551 Ib) 104 kg ( 2291b) 254 kg ( 560 Ib) 300 kg ( 661 Ib)

Combine Dimensions Wheel Thread

front

rear Width over Tyres

on 18.4-34 tyres on 23.1-26 14 PR tyres and DW 20-26 wheels on 28.1-26 tyres adjustable axle on 18.4-34 tyres on 23.1-26 14 PR tyres and DW 20-26 wheels on 28.1-26 tyres

2510 mm (98 3/4 in) 2550 mm (100 1/2 in) 2780 mm (109 1/2 in) 2300 mm (90 1/2 in) 2980 mm (117 1/4 in) 3140 mm (123 1/2 in) 3500 mm (137 3/4 in)

Wheel Base

3650 mm (143 3/4 in)

Ground Clearance

420 mm (16 1/2 in)

Turning Diameter, conforming to DIN 70020 Specifications

1.4

16800 mm (661 1/2 in)

00 106 .... 56 SPECIFICATIONS DOMINATOR 106

~-----------

L------------.....&

Operatjng Position WIDTH B

Cutting width

3.90 m (13 ft)

4.50 m (15ft)

5.10 m (17ft)

5.70 m (19 ft)

6.60 m (22ft)

7.50"m ("25ft)

Overall width

5565 mm 6175 mm 6785 mm 7395 mm 8310 mm 9225 mm (219 in) (243 in) (267 1/4) (291 1/4) (327 1/4) (363 1/4 in) Overall widths are with deflectors set out on each side by 600 mm (23 3/4 in).

HEIGHT H

With four-row (3 m) maize picker head With five-row maize picker head With six-row maize picker head

3260 mm (128 1/4 in) 4060 mm (159 3/4 in) 5200 mm (204 3/4 in)

To top of grain tank When grain tank lid is open To top of cab To bottom edge of grain tank unloading tube

3760 mm (148 in) 415 mm ( 16 3/8 in) 3720 mm (146 1/2 in)

add

4020 mm (158 1/4 in)

On 23.1-26 or 28.1-26 tyres the height dimensions are being reduced by approx. 40 mm (1 1/2 in).

LENGTH L

Without dividers With hoop dividers With long dividers With short dividers Witz maize picker head , With straw hood back panel adjusted to rearward position With straw spreader

9190 mm (361 3/4 in) 9550 mm (376 in) 10540 mm (415 in) 10290 mm (405 in) 10220 mm (402 1/4"in) add add

300 mm ( 11 3/4 in) 500 mm ( 19 3/4 in)

1.5

00 106 .... 56 SPECIFICATIONS DOMINATOR 106

.......- ----------L--------------..

Transport Position WIDTH B

HEIGHT H

Cutting width

3.90 m (13ft)

4.50 m (15ft)

5.10 m (17ft)

5.70 m (19 ft)

6.60 m (22ft)

7.50 m (25ft)

Overall width

4365 mm 4975 mm 5585 mm 6195 mm 7110 mm 8025 mm (171 3/4) (1953/4) (220 in) (244 in) (280 in) (315 in) With cutterb6r detached With four-row (3 m) maize picker head With five-row maize pic.ker head With six-row maize picker head

3000 mm (118 in) 3000 mm (118 in) 3800 mm (149 1/2 in) 4940 mm (194 1/2 in)

Ta top of grain tank Ta top of cab

3760 mm (148 in) 3720 mm (146 1/2 in)

On 23.1-26 or 28.1-26 tyres the height dimensions are being reduced by approx. 40 mm (1 1/2 in).

LENGTH L

1.6

With cutterbar detached Without dividers With hoop dividers With long dividers With short dividers With maize picker head

7770 mm (306 in) 9290 mm (365 3/4 in) 9650 mm (380 in) 10640 mm (419 in) 10390 mm (409 in) 10320 mm (406 in)

DO 106 .... 56 SPECIFICATIONS DOMINATOR 106 SETTINGS AND CAPACITIES Hydraulic Oil Pressures Lift hydraulic system pressure relief valve

180 bar (2610 psi)

Hydrostatic steering system pressure relief valve

90+ 5 bar (1305+ 72 .5 psi)

Hydrostatic ground drive: (LINDE hydrostatic pump BPV 100 S) Charge pressure Operati ng pressu re

16 bar ( 232 psi) 420 bar (6091 psi)

(SAUER hydrostatic pump SPV 23) Charge pressure Operating pressure

14 bar ( 203 psi) 420 bar (6091 psi)

Oil Capacities Transmission gearbox

5 litres (4.4 Imp. qt; 5.28 U.S. qt) SAE 90 (M I L-L-21 05 B) API-G L-5-90 Hypoid Transmission Oil

Final drive gearboxes

4 litres each (3.5 Imp. qt; 4.2 U.S. qt) SAE 90 (M I L-L-21 05 B) API-G L-5-90 Hypoid Transmission Oil

Lift hydraulic system

approx.7 litres (6.2 Imp.qt; 7.4 U.S. qt) Hydraulic Oil, H-LP Oils conforming to (DI N 51524) ISO-VG 68 Specifications

LINDE hydrostatic ground drive system

approx. 8 litres (7 Imp. qt; 8.5 U.S. qt) Hydraulic Oil, H-LP Oils conforming to (DIN 51524) ISO-VG 68 Specifications

SAUER hydrostatic ground drive system

approx. 27 litres (23.76 Imp. qt; 28.5 U.S. qt) Hydraulic Oil, H-LP Oils conforming to (DI N 51524) ISO-VG 68 Specifications

Engines

consult engine instruction book and combine operator's manual

Slip clutches Reel

200 Nm (145 ft Ib)

Main table auger

200 Nm (145 ft Ib)

Upper feed rake shaft

220 Nm (159 ft Ib)

Returns elevator

adjust ratchet clutch so that no play exists

1.7

DO 106 .... 56 SPECIFICATIONS DOMINATOR 106 Shear Bolt

Grain tank unloading system

M 10 x 45 DIN 931-8.8

Knife Register

the center of the knife sections should line up with the center of the cutterbar fingers at each end of the knife stroke

Reel

Basic setting

reel drive shaft placed vertically over the knife. The tines should be adjusted to vertical position.

Main table auger

Basic setting

approx. 15 mm (19/32 in) clearance between auger flights and bottom of cutterbar

Concave

Control (initial) setting

Brakes

Steering

1.8

concave entrance:

13 mm (1/2 in) clearance measured at third concave bar

concave exit:

3 mm (1/8 in) clearance measured at third last concave bar

concave main adjusting lever:

locked in 3rd hole of quadrant

concave rear adjusting lever:

locked in 1st hole of quadrant (e = narrow)

Foot brake

brake must grip when the pedal is depressed through one third of its total travel

Hand brake

brake should be effective with the..hand-l-e·locked in the first three to four teeth in the segment with the steering cylinder piston rod fully extended, the adjustable stop bolts must be contacting the steering arms

DO 106 .... 56 SPECIFICATIONS DOMINATOR 96 To be sure, always compare settings and filling capacities with specifications stated in the appropriate Operator's Manual for the machine concerned.

Technical data, dimensions and weights are given as an indication only. CLAAS reserve the right to make changes in design and specifications at any time without previous notice and rejects all responsibility in case of errors.

NOTE: Front, rear, right and left refer to direction of travel.

Cutterbar 3-.90 m (13 ft)

Cutting widths

3.60 m (12 ft)

4.50 m (15 ft)

5.10 m (17 ft)

Height adjustment

hydraulic

Cutting height range

from 360 mm (14 114 in) below ground level to 1300 mm (51 114 in) above ground level

Clearance height under cutterbar skid

with floatation springs in use with floatation springs blocked

Reel drive

belt-operated variable speed drive

Reel height adjustment

hydraulic

Feeder house

chain-type feed rake

Cutterbar clutch

belt-operated

5.70 m (19 ft)

925 mm (36 112 in) 1075 mm (42 114 in)

Threshing Equipment Stone trap

standard equipment

Concave

adjustable from operator's platform rear of concave separately adjustable (2nd lever) width 1320 mm (52 in), 12 bar

Disawning

disawning plates underneath the concave, two and three disawning plates can be engaged separately

Threshing drum

width 1320 mm (52 in) diameter 450 mm (17 3/4 in) six rasp bars, six drum discs speed infinitely variable from 650 to 1500 1Imin (rpm) Optional: a) step pulley drive 800, 1000, 1200, 1500 1Imin (rpm) a1) additional speed 650 1/min (rpm) b) slow speed threshing drum drive kit, 3-speed chain drive: 300, 430 and 550 1/min (rpm)

Threshing mechanism clutch

belt-operated

1.9

00 106 .... 56 SPECIFICATIONS DOMINATOR 96 Straw Walkers Type

step type walkers and intensive separation system (crankshaft with tines)

No. of walker racks

five

No. of walker crankshafts

two

Speed of walker crankshafts

220_5 1/min (rpm)

No. of tine crankshafts

two

No. of tines per crankshaft

five

Walker area

5.80 m 2 (8990 sq in)

Separating area

6.60 m 2 (10230 sq in)

Cleaning Type

forced air cleaning fan

Wind volume control

by infinitely variable fan speed additional fan shutters (optional)

Total cleaning area

4.25 m 2 (6588 sq in)

Grain tank Capacity

5200 litres (143 Imp. bushels, 147.7 U.S. bushels)

Unloading tube

hydraulically operated position control

Engine

Mercedes OM 352 A

Cubic capacity

5675 cm 3 (346 in 3 )

Max. speed 1Imin (rpm)

2600

Idle speed 1Imin (rpm)

1150

kW (DIN H.P.)

110 (150)

Cooling

water

Fuel tank capacity

300 litres (66 Imp. gal, 79 U.S. gal)

Battery

12 Volt, 110 Ah

Ground Drive a) Mechanical

variable ground speed, hydraulically controlled

Clutch

dry single disc clutch

T ransm ission

three forward, one reverse gear

Speed range

on 23.1-26 R 1 tyres 1. Gear 1.6 to 4.0 km/h (0.9 to 2.5 mph) 2. Gear 3.5 to 8.6 km/h (2.4 to 5.3 mph) 3. Gear 8.0 to 19.7 km/h (5.0 to 12.2 mph) R.-Gear 2.8 to 6.9 km/h (1.7 to 4.3 mph)

1.10

DO 106 .... 56 SPECIFICATIONS DOMINATOR 96 b) Hydrostatic

controlled by lever on operator's platform

T ransm ission

three gear ranges in either forward or reverse 1. and 2. gear range for field operation 3. gear range for road travel

Ground speeds in kilometers per hour

on 23.1-26 R1 tyres

Forward travel

1. from 0 to 5.4 km/h (from 0 to· 6.8 km/h) 2. from 0 to 9.9 km/h (from 0 to 12.6 km/h) 3. from 0 to 19.9 km/h (from 0 to 25.3 km/h)

Reverse travel

1. from 0 to 4.0 km/h (from 0 to 4.9 km/h) 2. from 0 to 7.4 km/h (from 0 to 8.9 km/h) 3. from 0 to 15.0 km/h (from 0 to 18.0 km/h)

Ground speeds in miles per hour

on 23.1-26 R1

Forward travel

1. from 0 to 3.4 mph (from 0 to 4.2 mph) 2. from 0 to 6.2 mph (from 0 to 7.8 mph) 3. from 0 to 12.4 mph (from 0 to 15.7 mph)

Reverse travel

1. from 0 to 2.5 mph (from 0 to 3.0 mph) 2. from 0 to 4.6 mph (from 0 to 5.5 mph) 3. from 0 to 11.2 mph (from 0 to 11.2 mph) Figures in brackets are only applicable for certain countries.

In countries with a speed limit of 20 km/h (12.4 mph) for self-propelled machinery of husbandry, the hydrostatic drive system incorporates a device that limits the ground speed accordingly.

Traction Wheel Drive

via final drive gears in oil bath

Steering

hydrostatic

Brakes

Foot brakes

hydraulic, designed to work independently when the pedal lock is removed

Hand brake

mechanical, independent of foot brake

Tyres and Tyre Pressures

tyre sizes

18.4-34 14 PR 23.1-2612PR 23.1-26 14 PR 28.1-26 12 PR 30.5-3210PR 12.5/80-18 6 PR 12.5/80-18 10 PR 14.5/75-20 8 PR

bar (psi)

bar (psi)

bar (psi)

minimum tyre pressure grai n cutterbar 5.70 m 5.10 m 4.50m 3.90m 3.60 m (12 ft) (17 ft) (15 ft) (13 ft) (19 ft) and up bar (psi) bar (psi) bar (psi)

3.3 (48) 2.1 (30) 2.5 (36) 1.8 (26) 1.5 (22)

3.1 (45) 2.1 (30) 2.1 (30) 1.6 (23) 1.1 (16)

3.0 (43) 2.0 (29) 2.0 (29) 1.6 (23) 1.1 (16)

3.0 (43) 2.0 (29) 2.0 (29) 1.6 (23) 1.1 (16)

2.8 (41) 1.9 (27) 1.9 (27) 1.5 (22) 1.1 (16)

2.6 (38) 1.7 (25) 1.7 (25) 1.4 (20) 1.1 (16)

-

2.7 (39) 3.0 (43) 2.4 (35)

2.7 (39) 3.0 (43) 2.4 (35)

2.7 (39) 3.0 (43) 2.4 (35)

2.7 (39) 3.0 (43) 2.4 (35)

2.7 (39) 3.0 (43) 2.4 (35)

maximum tyre pressure

-

maize picker head six-row five-row four-row

Where ground conditions allow maximum tyre pressure, the maximum tyre pressure should be maintained in order to obtain the longest possible service life of the tyre.

Torque Settings of Wheel Nuts and Wheel Bolts

Front wheels

wheel nuts with thrust piece H 22 DIN 74361-10 = 520 Nm (376 ft Ib)

Rear wheels

wheel bolts M 18 x 1.5 = 325 Nm (235 ft Ib)

1.11

DO 106 .... 56 'SPECIFICATIONS DOMINATOR 96 Weights Combine equipped with 23.1-26 R1 and 12.5/80-18 15 tyres, empty fuel tank and six cylinder engine: Determine the total weight of the machine·by adding the weight of the equipment used on the combine to the weight of the basic machine.

Basic machine (without cutterbar)

7432 kg (16385 Ib)

With cutterbar and spring tine reel 3.60 m (12 ft) 3.90 m (13 ft) 4.50 m (15 ft) 5.10 m (17 ft) 5.70 m (19 ft)

add 920 kg ( 20281b) add 960 kg ( 2116 Ib) add 1040 kg ( 22931b) add 1120 kg ( 2469 Ib) add 1200 kg ( 2646 Ib)

Two cpl. divider assemblies With straw chopper With cab and ventilating system With four-row maize picker head With five-row maize picker head With six-row maize picker head With maize head stalk chopper With wheel weights (one set) With liquid ballast (magnesium chloride solution) filled into tyres With extra weights in compliance with road regulations (not for all cou ntries)

add 50 kg ( 11 0 Ib) add 264 kg ( 582 Ib) add 260 kg ( 573 Ib) add 1260 kg ( 2778 Ib) add 1510 kg ( 3329 Ib) add 1740 kg ( 3836 Ib) add 250 kg ( 551 Ib) add 104 kg ( 229 Ib) add 210 kg ( 4631b) add 300 kg ( 661 Ib)

Combine Dimensions Wheel Tread

front

rear

Width over Tyres

on 23.1-26 12 PR tyres and DW 16-26 wheels on 23.1-26 14 PR tyres and DW 20-26 wheels on 18.4-34 tyres on 28. 1-26 tyres wide axle adjustäble axle

on 23.1-26 12 PR tyres and DW 16-26 wheels on 23.1-26 14 PR tyres and DW 20-26 wheels on 18.4-34 tyres on 28.1-26 tyres

2450 mm (96 1/2 in) 2550 mm (100 1/2 in) 2510 mm (98 3/4 in) 2780 mm (109 1/2 in) 2050 mm (80 3/4 in) 2300 mm (90 1/2 in) 2500 mm (98 1/2 in) 2700 mm (106 1/4 in) 3000 mm (118 in) 3140 mm (123 1/2 in) 2980 mm (117 1/4 in) 3500 mm (137 3/4 in)

Wheel Base

3650 mm (143 3/4 in)

Ground Clearance

420 mm (16 1/2 in)

Turning Diameter, conforming to DIN 70020 Specifications

1.12

16800 mm (661 1/2 in)

Da 106 .... 56 SPECIFICATIONS DOMINATOR 96

.......- ----------L--------------..

Operating Position WIDTH B

Cutting width

3.60 m (12ft)

3.90 m (13ft)

Overall width

5190 mm 5565 mm (204 1/4 in) (219 in)

4.50 m (15ft)

5.10 m (17ft)

5.70 m (19ft)

6175 mm (243 in)

6785 mm 7395 mm (267 1/4 in) (291 1/4 in)

Overall widths are with deflectors set out on each side by 600 mm (23 3/4 in).

HEIGHT H

LENGTH L

With four-row (3 m) maize picker head With five-row maize oicker head With six-row maize picker head

3260 mm (128 1/4 in) 4060 mm (159 3/4 in) 5200 mm (204 3/4 in)

Ta top of grain tank When grain tank lid is open To top of cab To bottom edge of gran tank

3720 mm (146 1/2 in) 415 mm ( 16 11/32 in) 3680 mm (144 3{4 in) 3530 mm (139 in)

Without dividers With hoop dividers With long dividers With short dividers With maize picker head With straw hood back panel adjusted to rearward position With straw spreader

add

9190 mm (361 3/4 in) 9550 mm (376 in) 10540 mm (415 in) 10290 mm (405 in) 10220 mm (402 1/4 in) add add

300 mm (11 3/4 in) 500 mm (19 3/4 in)

1.13

00 106 .... 56 SPECIFICATIONS DOMINATOR 96

...---- B------.e

......- - - - - - - - - - - L - - - - - - - - - - - - - - - l..

Transport Position WIDTH B

Cutting width

3.60 m (12ft)

3.90 m (13 ft)

4.50 m (15ft)

5.10 m (17ft)

5.70 m (19 ft)

Overall width

3990 mm (157 in)

4365 mm (171 3/4)

4975 mm '( 195 3/4)

5585 mm (220 in)

6195 mm (244 in)

With cutterbar detached With four-row (3 m) maize picker head With five-row maize picker head With six-row maize picker head

3000 mm (118 in) 3000 mm (118 in) 3800 mm (149 1/4 in) 4940 mm (194 1/2 in)

HEIGHT L

To top of grain tank To top of cab

3720 mm (146 1/2 in) 3680 mm (144 3/4 in)

LENGTH L

With cutterbar detached Without dividers With hoop dividers With long dividers With short dividers With maize picker head

7770 mm (306 in) 9290 mm (365 3/4 in) 9650 mm (380 in) 10640 mm (419 in) 10390 mm (409 in) 10320 mm (406 1/4 in)

1.14

DO 106 .... 56 SPECIFICATIONS DOMINATOR 96 SETTINGS AND CAPACITIES Hydraulic Oil Pressures Lift hydraulic system pressure relief valve

180 bar (2610 psi)

Hydrostatic steering system pressure relief valve

90+ 5 bar (1305+ 72 .5 psi)

Hydrostatic ground drive: (LINDE hydrostatic pump BPV 70 S) Charge pressure Operating pressure

16 bar ( 232 psi) 420 bar (6091 psi)

(SAUER hydrostatic pump SPV 22) Charge pressure Operati ng pressu re

14 bar ( 203 psi) 420 bar (6091 psi)

Oil capacities Transmission gearbox

• 6 litres (5.3 Imp. qt; 6.3 U.S. qt) SAE 90 (M I L-L-21 05) API-G L-4-90 Transmission Oil

Final drive gearboxes

3 litres each (2.6 Imp. qt; 3.2 U.S. qt) SAE 90 (MIL-L-2105) API-GL-4-90 Transmission Oil

Lift hydraulic system

approx.6 litres (5.3 Imp. qt, 6.3 U.S. qt) Hydraulic Oil, H-LP Oils conforming to (DIN 51524) ISO-VG 68 Specifications

LI ND E hydrostatic ground drive system

approx. 8 litres (7 Imp. qt; 8.5 U.S. qt) Hydraulic Oil, H-LP Oils conforming to (DIN 51524) ISO-VG 68 Specifications

SAUER hydrostatic ground drive system

approx. 27 litres (23.76 Imp. qt; 28.5 U.S. qt) Hydraulic Oil, H-LP Oils conforming to (DIN 51524) ISO-VG 68 Specifications

Engines

consult engine instruction book and combine operator's manual

Slip clutches Reel

200 Nm (145 ft Ib)

Main table auger

200 Nm (145 ft Ib)

Upper feed rake shaft

220 Nm (159 ft Ib)

Returns elevator

adjust ratchet clutch so that no play exists

1.15

00 106 .... 56 SPECIFICATIONS DOMINATOR 96 Shear Bolt

Grain tank unloading system

M 10 x 45 DIN 931-8.8

Knife Register

the center of the knife sections should line up with the center of the cutterbar fingers at each end of the knife stroke

Reel

Basic setting

reel drive shaft placed vertically over the knife. The tines should be adjusted to vertical position.

Main table auger

Basic setting

approx. 15 mm (19/32 in) clearance between auger flights and bottom of cutterbar

Concave

Control (initial) setting

Brakes

Steering

1.16

concave entrance:

13 mm (1/2 in) clearance measured at third concave bar

concave exit:

3 mm (1/8 in) clearance measured at third last concave bar

concave main adjusting lever:

locked in 3rd hole of quadrant

concave rear adjusting lever:

locked in 1st hole of quadrant (e = narrow)

Foot brake

brake must grip when the pedal is depressed through one third of its total travel

Hand brake

brake should be effective with the handle locked in the first three to four teeth in the segment. with the steering cylinder piston rod fully extended, the adjustable stop bolts must be contacting the steering arms

DO 106 .... 56 SPECIFICATIONS DOMINATOR 86 TechniCaI data, dimensions and weights are given as an indication only. CLAAS reserve the right to make changes in design and specifications at any time without previous notice and ejects all responsibilit'! in case of errors.

To be sure, always compare settings and filling capacities with specifications stated in the appropriate Operator's Manual for the machine concerned.

NOTE: Front, rear, right and left refer to direction of travel.

Cutterbar Cutting widths

3.60 m (12 ft)

Height adjustment

hydraulic

Cutting height range

from 360 mm (14 1/4 in) below ground level to 1300 mm (51 114 in) above ground level

Clearance height under cutterbar skid

with floatation springs in use with floatation springs blocked

Reel drive

belt-operated variable speed drive

Reel height adjustment

hydraulic

Feeder house

chain-type feed rake

Cutterbar clutch

belt-operated

3.90 m (13 ft)

4.50m (15 ft)

5.10 m (17 ft)

5.70 m (19 ft)

900 mm (35 1/2 in) 1040 mm (41 in)

Threshing Equipment Stone trap

standard equipment

Concave

adjustable from operator's platform rear of concave separately adjustable (2nd lever) width 1320 mm (52 in), 12 bar

Disawning

disawning plates underneath the concave, two and three disawning plates can be engaged separately

Threshing drum

width 1320 mm (52 in) diameter 450 mm (17 3/4 in) six rasp bars, six drum discs speed infinitely variable from 650 to 1500 1/min (rpm)

Optional: a) step pulley drive 800, 1000, 1200, 1500 1Imin (rpm) a1) additional speed 650 1/min (rpm) b) slow speed threshing drum drive kit, 3-speed chain drive: 300, 430 and 550 1/min (rpm) Threshing mechanism clutch

belt-operated

1.17

00 106 .... 56 SPECIFICATIONS DOMINATOR 86

Straw Walkers Type

step typ walkers and intensive separation system (crankshaft with tines)

No. of walker racks

five

No. of walker crankshafts

two

Speed of walker crankshafts

220_ 5 1/min (rpm)

No. of tine crankshafts

two

No. of tines per crankshafts

five

Walker area

5.15 m 2 (7982.5 sq in)

Separating area

5.95 m 2 (9222.5 sq in)

Cleaning Type

forced air cleaning fan

Wind volume control

by infinitely variable fan speed additional fan shutters (optional)

Total cleaning area

4.25 m 2 (6588 sq in)

Grain tank Capacity

4600 Iitres (126.5 Imp. bushels; 130.6 U.S. bushels)

Unloading tube

hydraulically operated position control

Engines

Mercedes OM 352

Perkins 6.3724

Cubic capacity

5675 cm 3

6100 cm 3 (372 in 3 )

Max. speed 1Imin (rpm)

2600

2600

Idle speed 1/min (rpm)

1150

1150

kW (DIN H.P.)

88 (120)

88 (120)

Cooling

water

water

Fuel tank capacity

300 Iitres (66 Imp. gal; 79 U.S. gal)

Battery

12 Volt, 110 Ah

1.18

(346 in 3 )

Suggest: If the above button click is invalid.

Please download this document first, and then click the above link to download the complete manual.

Thank you so much for reading

DO 106 .... 56 SPECIFICATIONS DOMINATOR 86 Ground Drive a) Mechanical

variable ground speed, hydraulically controlled

Clutch

dry single disc clutch

Transmission

three forward, one reverse gear

Speed range

on, 18.4-30 R1 /.23.1-26 R1 tyres 1. Gear 1.6 to 4.0 km/h (0.9 to 2.5 mph) 2. Gear 3.5 to 8.6 km/h (2.4 to 5.3 mph) 3. Gear 8.0 to 19.7 km/h (5.0 to 12.2 mph) R.-Gear 2.8 to 6.9 km/h (1.7 to 4.3 mph)

Traction Wheel Drive

via final drive gears in oil bath

Steering

hydrostatic

Brakes

Foot brake

hydraulic, designed to work independently when the pedal lock is removed

Hand brake

mechanical, independent of foot brake

Tyres and Tyre Pressures

tyre size

18.4-30 12 PR 18.4~34 12 PR 23.1-26 12 PR 28.1-26 12 PR 12.5/80-18 6 PR 12.5/80-18 10 PR 14.5/75-20 8 PR

maximum tyre pressure

minimum tyre pressure grain cutterbar 5.70 m 5.10 m 4.50m (19 ft) (17 ft) (15 ft) bar (psi) bar (psi)

bar (psi)

maize picker head six-row five-row four-row bar (psi) bar (psi)

2.9 (42) 2.9 (42) 2.1 (30) 1.8 (26)

-

-

-

-

2.0 (29) 1.5 (22)

2.9 (42) 1.9 (27) 1.5 (22)

2.9 (42) 1.9 (27) 1.5 (22)

2.5 (36) 1.7 (25) 1.1 (16)

2.9 (42) 2.4 (35) 1.6 (23) 1.1 (16)

2.7 (39) 2.7 (39) 2.0 (29)

2.7 (39) 2.7 (39) 2.0 (29)

2.7 (39) 2.7 (39) 2.0 (29)

2.7 (39) 2.7 (39) 2.0 (29)

2.7 (39) 2.7 (39) 2.0 (29)

-

3.90 m 3.60 m (13 ft) (12 ft) bar (psi)

Where ground conditions allow maximum tyre_pressure, the maximLam tyre pressure should be maintained in order to obtain the longest possible service of the tyre.

Torque Settings of Wheel Bolts and Wheel Nuts

Front wheels

with flange nuts M 22 x 1.5 and special washer (Limes) C 22.5 DIN 74361 = 520 Nm (376 ft lb)

Rear wheels

M 18 x 1.5 wheel bolts = 325 Nm (235 ft lb)

1.19

DO 106 .... 56 SPECIFICATIONS DOMINATOR 86 Weights Combine equipped with 18.4-30 R1 and 12.5/80-18 Impl. tyres, empty fuel tank, six cylinder engine.

Determine the total weight of the machine by adding the weight of the equipment used on the combine to the weight of th"e basic machine.

7170 kg (15807 Ib)

Basic machine (without cutterbar) With long lip cutterbar and spring tine reel 3.60 m (12 ft) 3.90 m (13 ft) 4.50 m (15 ft) 5.10m(17ft) 5.70 m (19 ft) Two cpl. divider assemblies With straw chopper With cab and ventilating system With four-row maize picker head With five-row maize picker head With six-row maize picker head With maize head stalk chopper With wheel vveights (one set) With liquid ballast (magnesium chloride solution) filled into 12.5/80-18 rear tyres With extra weights in compliance with road regulations (not for all countries)

add add add add add add add add add add add add add

920 kg ( 20281b) 960 kg ( 2116 Ib) 1040 kg ( 2293 Ib) 1120 kg ( 24691b) 1200 kg ( 2646 Ib) 50 kg ( 110 Ib) 264 kg ( 5821b) 260 kg ( 5731b) 1260 kg ( 27781b) 1510 kg ( 33291b) 1740 kg ( 3836 Ib) 250 kg ( 551 Ib) 104 kg ( 2291b)

add add

210 kg ( 300 kg (

4631b) 661 Ib)

Combine Dimensions Wheel Tread

Width over Tyres

front

on 18.4-30 tyres on 23. 1-26 tyres on 18.4-34 tyres

2522 mm (99 1/4 in) 2450 mm (96 1/2 in) 2510 mm (99 in)

rear

wide rear axle adjustable rear axle

2050 mm (80 3/4 in) 2300 mm (90 1/2 in) 2500 mm (98 1/2 in) 2700 mm (106 1/4 in)

on 18.4-30 tyres on 23.1-26 tyres on 18.4-34 tyres

2967 mm (116 3/4 in) 2985 mm (117 1/2 in) 2975 mm (117 in)

Wheel Base

3650 mm (143 3/4 in)

Ground Clearance

380 mm (15 in)

Turning Diameter, conforming to DIN 70020 Specifications

1.20

15900 mm (626 in)