Clean Marble Statue or Marble Murti

PRESENTATION

How to clean a Marble Statue or Marble Murti?

W W W . D I X I T A R T S . C O . I N

clean Marble Statue Marble has been utilized for ornamental reasons since antiquity. Heat and pressure turn limestone of calcium carbonate (a crystal form of calcium carbonate) into marble after other materials have overlain it.

Despite being transparent, marble enables light to pass through and emits a pleasant glow. It can be quite nicely polished.

Because of its characteristics, this stone may be used to create sculptures. When finegrained, the material is soft and simple to shape, and it has the same qualities in all directions.

Marble statues exist in a variety of colors, sizes, and forms. Maintaining the smooth, delicate aspect of a marble statue needs frequent washing and upkeep, whether indoors or outdoors.

This distinguishing feature of marble calls our attention to the best technique to clean marble and preserve its natural beauty. From Dixit Art Sculptural, you can buy the best statues online in India. It provides the Marble Statue price very affordable in Jaipur.

Cleaning marble sculptures or murtis in architecture:

The therapy procedure consisted of seven steps 1) Use a vacuum to remove any loose dust or dirt.

2) Remove the previous wax-resin covering and embed dirt with xylene gel.

3) Using precut cotton pads, scrape the gel with scouring beads and clean it with mineral spirits (Webril Handi-Pads, available from Talas, NY).

4) Apply a poultice of NTA gel paste to the skin and cover it with polyethylene film. Allow the mixture to sit for at least six hours.

5)) Using a paper towel, Webril pads, and a cotton swab, remove the generalpurpose paste.

6) Rinse away any residual residues thoroughly.

7) Finish with a layer of Renaissance microcrystalline wax.

We also have another way for repairing marble sculptures known as the Fuller Earth procedure. To clean marble, a mudpack called Fuller's Earth is utilized. Clay is used to remove air pollution stains and bird droppings from marble, which is then rinsed away with distilled water. Although this procedure is quite successful for cleaning marble, the process is extremely slow.

The general procedure for cleaning marble sculptures at home is as follows: 1-gallon warm water and 1 to 2 tablespoons of mild dish detergent or stone cleaner in a bucket After soaking the marble statue in soapy water, wipe it down with a sponge or towel. Rinse the sponge or towel often in the bucket.

Rinse the marble statue well and wipe it with a towel to remove any residue.

Tips for Caring for Marble Statues and Preventing Damage 1. Spills should be cleaned as they occur.

Standing water, as well as spills and stains, will be absorbed by the porous surface of marble. When this happens, marble gets damaged or discolored. Using a moist cloth, blot up the spill (preferably microfiber).

2. Never let marble sculptures air dry.

The drying of marble statues by air is hazardous. Both water and chemicals are absorbed by the marble during the air drying of the statue.

There will be discoloration or stains as a result.

3.Use gentle detergents.

When washing your murti, always use a pH-neutral detergent. These products are mild on the surface and may be used on marble due to their pH neutrality. However, they are less successful at removing stubborn stains than acidic and alkaline treatments.

THANK YOU

8005815924 www.dixitarts.co.in