A selection of energy-saving LED luminaires for the retrofitting of condominiums and residential buildings Welcome home!
A
broad selection of LED lighting fixtures that result in remarkable energy savings and improved safety, particularly suited for the renovation and retrofitting of residential buildings (also thanks to the integration of presence detectors, dimmers as well as, emergency lights). Welcome home!
Coming home
Good lighting always makes a good first impression. Well-tended gardens and ambience lighting, well-lighted entrance ways, and safe parking areas put residents immediately at ease, especially if they’re coming home from a long day at work and they only want to relax.
Indoor and outdoor car parks
Lobbies, stairways and floor corridors
Utility rooms
The entrance way for those returning home at night must be well-illuminated and clearly marked. Luminaires with presence detectors will switch on when someone enters its detection area. Lights will go off when they’re not needed (with considerable energy savings) while ensuring all the safety needed.
According to current standards lobbies and staircases require minimum illuminance levels. Even emergency lights are essential in case of power outage to allow residents to evacuate safely. Last but not least, an aesthetically pleasing area contributes to creating a welcoming feeling.
Condominiums have many spaces at the disposal of residents. Guaranteeing hygiene with luminaires with a high degree of protection, installing an artificial lighting system that requires little maintenance, and being able to adjust the lights according to occupancy are all choices that can contribute to considerable savings both in terms of energy and maintenance.
The green spaces pertaining to a condominium are the building’s calling card.
Gardens
Attractive landscape lighting, high energy savings and improved safety make the condominium much more attractive even for potential buyers of the individual apartments.
Condominium lighting
A major cost for condominiums, next to the costs incurred for ordinary maintenance (such as cleaning, gardening, waste management) is the lighting of common areas. The lighting of common areas is often the topic of discussions between residents and controversy with building managers, always searching for a more convenient energy provider. The amount of energy wasted to light up the common areas of a residential building may be staggering: in stairways, lifts, automatic gates, intercoms, etc., the lights that stay on all day may be a notable item of expenditure.
Common areas
The electricity used in the common areas of a condominium “is different” from the one used in the individual units or in similar residential complexes.
You don’t live in common areas, so laws and restrictions for residential areas don’t apply. This difference increases the common expenses divided among individual owners. Therefore, simply switching to LEDs will achieve great energy savings.
Light only when needed
There are many areas in a condominium that are rarely used by residents. These areas usually contain energy meters, cellars, garage corridors and waste bins. In this case apart from changing to LEDs, a great solution would be to install LED lighting systems with PRESENCE DETECTORS: lights go on only when the sensor detects the presence of someone in the room and will turn off when no one’s there.
Necessary, but dimmable
During the evening, especially in outdoor areas (gardens, walkways, entrances), lights need to stay on and allow residents to come safely home.
But, at night, when people sleep, outdoor fixtures should be able to dim and reduce their luminous flux in order to achieve greater savings.
Keeping areas clean and tidy
Common areas are often neglected, except for ordinary cleaning.
Changing to LEDs involves little maintenance costs. LEDs last longer so they don’t need to be replaced very often. By choosing luminaires with a high degree of protection, bugs won’t get caught inside, so that the luminaires won’t get dirty, requiring less cleaning, and ensuring their efficiency for longer periods of time.
Areas take on a refreshed look
There’s nothing better than coming back to a nice, cosy home, especially after a long day at work. It takes very little to make coming home more comfortable: a new colour for your walls, some furnishings (a painting or indoor plants), or setting up a modern lighting design.
Disano Group’s solutions
The experience matured by the Disano Group, combined with world renowned Italian design, and the use of the right technical solutions, have resulted in the development of luminaires that comply with condominium lighting standards embedding solutions that provide considerable energy savings.
Mini Ischia
Housing: pressed in die-cast aluminium
Pole connection: pressed in die-cast aluminium. Suited for poles with a diameter 60 mm.
Diffuser: polycarbonate 2,5 mm thick, thermal shock and impact resistant (UNI-EN 12150-1: 2001).
Coating: the fully automated powder-coating cycle involves a polyester-based, salt-spray corrosion-resistant and UV-stabilised paint
Standard supply: automatic temperature control inside the device with automatic resetting; dedicated electronic device to protect the LED module; Complete with waterproof connector for quick installation and anti-condensation valve for air recirculation Electronic safety device to protect the LED module and the related ballast compliant with EN 61547
Upon request: protective coating recommended for marine environments within 5 km of the sea
Mini Ischia
3691 Mini Ischia - rotosymmetric medium beam RM
CLD PROG
LUMEN OUTPUT (tq= 25 °C)
LED colour weight code W tot K - ølm - CRI
LED graphite 2.60
424770-39-0110-RM
424770-00-0110-RM 4 4000K - 582lm - CRI≥80
424770-73-0110-RM
CLD ZHAGA
3000K - 541lm - CRI≥80
2200K - 495lm - AMBER
LUMEN OUTPUT (tq= 25 °C)
LED colour weight code W tot K - ølm - CRI
LED graphite 2.60
424770-3954-0110-RM
424770-0054-0110-RM 4
424770-7354-0110-RM
4000K - 582lm - CRI≥80
3000K - 541lm - CRI≥80
2200K - 495lm - AMBER
Note: when ordering, make sure you select the AMBER LED type best suited for your lighting design and installation needs.
Other available versions code W tot K - ølm - CRI
424771-00-0220-RM 6,5
4000K - 986lm - CRI≥80
424771-39-0220-RM
424771-73-0220-RM
3000K - 918lm - CRI≥80
2200K - 838lm - AMBER
Luminous flux setup: this can be done by programming the drive current values requested when ordering/purchasing the fixture
424772-00-0440-RM 11
4000K - 1809lm - CRI≥80
424772-39-0440-RM
424772-73-0440-RM
424773-00-0280-RM 15 424773-39-0280-RM
424773-73-0280-RM
3000K - 1683lm - CRI≥80
2200K - 1538lm - AMBER
4000K - 2413lm - CRI≥80
3000K - 2244lm - CRI≥80
2200K - 2051lm - AMBER
3696 Mini Ischia - asymmetric wide beam AW CLD PROG LUMEN OUTPUT (tq= 25 °C)
LED colour weight code W tot K - ølm - CRI
LED graphite 2.60
424750-39-0110-AW 3000K - 542lm - CRI≥80
424750-00-0110-AW 4 4000K - 583lm - CRI≥80
424750-73-0110-AW 2200K - 495lm - AMBER
CLD ZHAGA
LUMEN OUTPUT (tq= 25 °C)
LED colour weight code W tot K - ølm - CRI
LED graphite 2.60
424750-3954-0110-AW
424750-0054-0110-AW 4 4000K - 583lm - CRI≥80
424750-7354-0110-AW
- 542lm - CRI≥80
- 495lm - AMBER
Note: when ordering, make sure you select the AMBER LED type best suited for your lighting design and installation needs.
424751-00-0220-AW 6,5
4000K - 988lm - CRI≥80
424751-39-0220-AW
Other available versions code W tot K - ølm - CRI Luminous flux setup: this can be done by programming the drive current values requested when ordering/purchasing the fixture
424751-73-0220-AW
424752-00-0440-AW 11 424752-39-0440-AW
424752-73-0440-AW
3000K - 919lm - CRI≥80
2200K - 840lm - AMBER
4000K - 1772lm - CRI≥80
3000K - 1649lm - CRI≥80
2200K - 1506lm - AMBER
4000K - 2363lm - CRI≥80
424753-39-0280-AW
424753-00-0280-AW 15
424753-73-0280-AW
3000K - 2198lm - CRI≥80
2200K - 2008lm - AMBER
VIRTUAL MIDNIGHT: to increase energy savings at night when there are fewer people and vehicles around, a lighting fixture can be programmed according to a specific profile (customizable on request). The fixture reduces its luminous flux through a self-learning process which, depending on the previous switching on and off times, will determine a hypothetical “virtual midnight”. This is the average value between the time the fixture is switched on (sunset) and switched off (sunrise). The “virtual midnight” is the reference point for dimming lights according to the desired profile. The device is integrated in the LED driver and therefore does not require any modification to the system.
In order for the system to function correctly, the system must be adjusted by a device that turns the system on and off on a regular basis every day.
Housing: pressed in die-cast aluminium
Pole connection: pressed in die-cast aluminium. Suited for poles with a diameter 60 mm.
Diffuser: polycarbonate 2,5 mm thick, thermal shock and impact resistant (UNI-EN 12150-1: 2001).
Coating: the fully automated powder-coating cycle involves a polyester-based, salt-spray corrosion-resistant and UV-stabilised paint
Standard supply: automatic temperature control inside the device with automatic resetting; dedicated electronic device to protect the LED module; Complete with waterproof connector for quick installation and anti-condensation valve for air recirculation Electronic safety device to protect the LED module and the related ballast compliant with EN 61547
Luminous flux setup: this can be done by programming the drive current values requested when ordering/purchasing the fixture
Note: when ordering, make sure you select the AMBER LED type best suited for your lighting design and installation needs.
LED: power factor ≥0,92. Luminous flux maintenance:
Virtual midnight in 2 steps subcode -35
Virtual Midnight subcode -30: fixtures are equipped with a device to reduce flux in 4 steps based on the calculation of the virtual midnight.
ATTENTION: original settings and time slots forthe“virtualmidnight”valuecanbecustomized in up to 5 steps upon request
Virtual midnight in 5 steps subcode -32
Braies
Housing/cover: made of die-cast aluminium.
Pole connection: pressed in die-cast aluminium. Suited for poles with a diameter 60 mm
Diffuser: in transparent, vandal-resistant and V2 self-extinguishing polycarbonate, UV-stabilized
Optics : made of PMMA with high temperature resistance and UV rays
Coating: the fully automated powder-coating cycle involves a polyester-based, salt-spray corrosion-resistant and UV-stabilised paint
Standard supply: dedicated electronic device to protect the LED module. Supplied with waterproof connector for quick installation and complete with an air-circulation valve; external screws and bolts in stainless steel. Supplied standard with double switch to choose the colour temperature between 2200K-2700K and the type of lighting for up to 4 lighting levels.
Upon request: protective coating recommended for marine environments within 5 km of the sea
1589
- 7522lm - CRI>80
Braies is available as standard with a 2200K and 2700K colour temperature to reproduce a cosy ambient light associated with sunset. In this way, the artificial light becomes a less invasive element in the environment, respecting the needs of the surrounding flora and fauna
Braies
Housing/cover: made of die-cast aluminium.
Pole connection: pressed in die-cast aluminium. Suited for poles with a diameter 60 mm
Diffuser: in transparent, vandal-resistant and V2 self-extinguishing polycarbonate, UV-stabilized
Optics : made of PMMA with high temperature resistance and UV rays
Coating: the fully automated powder-coating cycle involves a polyester-based, salt-spray corrosion-resistant and UV-stabilised paint
Standard supply: dedicated electronic device to protect the LED module. Supplied with waterproof connector for quick installation and complete with an air-circulation valve; external screws and bolts in stainless steel. Supplied standard with double switch to choose the colour temperature between 3000K-4000K and the type of lighting for up to 4 lighting levels.
Upon request: protective coating recommended for marine environments within 5 km of the sea
- 7105lm - CRI>80
- 6785lm - CRI>80
- 8555lm - CRI>80
- 8170lm - CRI>80
1589 Braies - CCT
- 3310lm - CRI>80
- 4042lm - CRI>80
- 3840lm - CRI>80
- 6785lm - CRI>80
- 8555lm - CRI>80
- 8170lm - CRI>80
Braies is available as standard with 3000K and 4000K colour temperatures, and with a 2200K and 2700K colour temperature to reproduce a cosy ambient light associated with sunset. In this way, the artificial light becomes a less invasive element in the environment, respecting the needs of the surrounding flora and fauna
Portofino
Housing and cone: in die-cast aluminium.
Column: in extruded aluminium, cylindrical section.
Base column: in die-cast aluminium with internal reinforcement ribs.
Diffuser: in vandal-resistant V2 self-extinguishing polycarbonate, UV-stabilized.
Coating: the fully automated powder-coating cycle involves a polyester-based, salt-spray corrosion-resistant and UV-stabilised paint
Upon request: protective coating recommended for marine environments within 5 km of the sea
Equipment: complete with waterproof connector for line connection. Easy and quick to install.
1871 Portofino - wall version
- ølm (230V) - CRI LED graphite 1.30 511165-00 10
- 801lm - CRI>80 511165-39
LED white 1.30 511166-00 10
- 745lm - CRI>80
- 801lm - CRI>80 511166-39
1881 Portofino - short version CLD
- 745lm - CRI>80
OUTPUT (tq= 25 °C)
230V colour weight code W tot K - ølm (230V) - CRI
Housing/frame/base: in die-cast aluminium with central articulated joint in die-cast aluminium. Coating: the fully automated powder-coating cycle involves a polyester-based, salt-spray corrosion-resistant and UV-stabilised paint Upon request: protective coating recommended for marine environments within 5 km of the sea
acc. 119 spike black 991335-00 In fiber glass nylon. For planting Koala into the ground.
acc. 120 pole support black 991336-00 In fibreglass nylon. To apply Koala on any Ø 60 pole in any position.
Koala
Koala
Micro Rodio
Housing: in die-cast aluminium with cooling fins.
Diffuser: 4mm thick tempered glass, resistant to thermal shocks and impacts.
Coating: the fully automated powder-coating cycle involves a polyester-based, salt-spray corrosion-resistant and UV-stabilised paint
Equipment: complete with galvanised and coated bracket; silicone rubber gasket; external screws and bolts in stainless steel; complete with electrical cable for mains connection. Electronic safety device to protect the LED module and the related ballast compliant with EN 61547 It works in two modes:
- differential mode: surge between power cables and between the phase and neutral.
- common mode: surge between power, L/N and ground cables or between the fixture’s body if it is of class II and installed on a metal pole.
LIGHT OFF LIGHT ON
1980 Micro Rodio - COB
OUTPUT (tq= 25 °C)
1980 Micro Rodio - COB - RADAR SENSOR
acc. 339 connector (3-pole) 993854-00
To be used for mains connection of Micro Rodio
(L70B50)
acc. 41 adjustable-angle arm graphite 995506-00 white 995508-00 RAL 7021 995509-00
Adjustable-angle arm galvanized steel. For Micro Rodio.
RADAR SENSOR (sub-code -19): is an automatic sensor that immediately senses the presence of people’s movements and anyone walking past. When there is movement within the sensor’s detection range, the light will remain ON. When no further movement is detected, the light will switch OFF after a pre-set time.
Power
FACTORY SETTINGS: Mounting
0,5-1-1,5 m/s
Remote control cod. 81418618 (to be purchased separately) that allows changing the parameters even after installation is complete and without the need to directly access the fixture. LED: power factor ≥0,92. Luminous flux maintenance:
Housing: in painted aluminium with glass diffuser, designed for wall-mounting.
Upright Plane
Housing: in painted aluminium, wallwasher lens version in clear polycarbonate and diffuser version in matt polycarbonate, designed for wallmounting.
1218 Pocket 1 - square
1219 Pocket 2
1203
Pocket 3 - square
1204
Pocket 4 - rectangular
Housing: in die-cast aluminium.
Diffuser: glass, resistant to impact and thermal shock
Coating: the fully automated powder-coating cycle involves a polyester-based, salt-spray corrosion-resistant and UV-stabilised paint.
Diffuser: In clear polycarbonate, anti-dazzle, vandal resistant.
745 Oblò J 2.0 - ON OFF
LED colour weight Ø mm
bianco
745 Oblò J 2.0 - DALI 2
745 Oblò J 2.0 - EM EC
CLD EC LUMEN OUTPUT (tq= 25 °C)
745 Oblò J 2.0 - EM 3h
745 Oblò J 2.0 - EM 3h + SENSOR
Built-in RADAR SENSOR: an electronic device that immediately detects any presence entering its range. When the sensor reads motion inside its range, lights will stay on. When it no longer senses motion and based on the lighting level in its range, the sensor will turn off the lights after a pre-programmed time.
The remote control (code 81418618) is to be purchased separately. It allows changing parameters after installation without the need to access the device directly.
Pastilla CCT / POWER SWITCH : in a single body frame, you have a fully equipped luminaire designed to meet any need, including the possibility to select the desired colour temperature (3000K-4000K-5700K) in 2 power wattages, maintaining aesthetic continuity and differentiating the amount of light emitted.
HOLD-TIME: is the period of time the light will stay ON after the sensor has been triggered.
POWER SWITCH = with this integrated switch you can select the fixture’s total wattage, 10W/15W - 13W/18W - 17W/24W.
CCT SWITCH = with this integrated switch you can select the desired light colour, 3000K - 4000K - 5700K.
The main feature of this luminaire is the “colour-changing” technology: with the built-in selector switch positioned on the fixture’s body, you can choose the desired colour temperature (3000K-4000K-6000K), adjusting its emission to most lighting installations. Pastilla
ON-OFF LIGHT SENSOR / PRESENCE (sub-code -19): is an automatic sensor that immediately sense the presence of people’s movements and anyone walking past. When there is movement within the sensor’s detection range, the light will remain ON. When no further movement is detected, the light will switch OFF after a pre-set time.
DAYLIGHT THRESHOLD:
Daylight sensor takes priority over the motion sensor. Set threshold according to specific needs. *Disable it to allow motion detection only.
• switch for adjusting light flux and colour temperature (CCT) standard configuration is 5700K and maximum power/flux values.
• can be configured for either Emergency Only (S.E.) mode or Maintained (S.A.) mode by directly wiring the electrical connections to the provided terminal block.
The main feature of this fixture is the new colour-changing technology. With two builtin switches you can:
• select 2 different colour temperatures, adjusting to most installations
• select the type of output luminous flux and power.
EM S.E. (Only EMergency):
621 Safety 3.0 CCT - EM 1h S.E. Emergency Only - S.A. Maintained
during of a blackout, the luminaire connected to the emergency circuit will switch on, preventing any inconvenience caused by the sudden loss of lighting. It offers an autonomy of 60/180 minutes. The battery automatically recharges once the power is restored.
EM S.A. (Maintained): during a blackout, the luminaire connected to the emergency circuit stays on, preventing any inconvenience caused by the sudden loss of lighting. It offers an autonomy of 60/180 minutes. The battery automatically recharges once the power is restored.
EXITEXITEXIT
acc. 472 labels for Safety 2.0 right out 995137-00 left out 995138-00 down out 995139-00 exit 995144-00
Self-adhesive pictograms available and visible up to 35 m. UNI EN1838.
Safety with AUTOTEST button: provides real-time information on the status of the luminaire, automatically performing all the tests indicated in the UNI-EN-50172 standard. A simple way to reduce costs and make system inspection and maintenance easier. Anyone can supervise the emergency lighting system.
acc. 315 outer shell white 995212-00 Made in polycarbonate. For recessed installation of Safety 2.0.
Safety 3.0 provides real-time information on the status of the luminaire, performing all the tests indicated in the UNI-EN-50172 standard. A simple way to reduce costs and make system inspection and maintenance easier. Anyone can supervise the emergency lighting system.
OPERATION
After 1st installation (power keep on during 24hrs).
Safety 3.0 with AUTOTEST
DESCRIPTION
At the beginning of the test a red LED indicator will flash slowly for 15 seconds, then the unit will switch to emergency mode for 3hrs and switch back to normal operation.
Functional test - 5 min (every 30 days). Green LED indicator will flash slowly (1sec on / 1sec off).
Full duration test - 3 hrs (every 180 days). At the beginning of the test a
Diffuser: in internally matt, anti-glare, shatter-proof and V2 selfExtinguishing, UV-stabilized polycarbonate.
Equipment: bowl sealing in black expanded EPDM; external screws in galvanized stainless steel and black O-rings. Complete with fixing plate. Mounting: wall or pole(ø 60).
1260 Vega
1260 Vega - EM
1260 Vega - SENSOR
Self adhesive pictograms available: acc. 1266 joint grey 420917-00 1-lamp adjustable support in nylon. For Ø 60 poles.
Housing/diffuser: extruded self-extinguishing V2 polycarbonate with smooth and dust resistant opaque outer surface.
End caps: grey injection moulded self-extinguishing V2 polycarbonate.
Equipment: complete with fairlead, stainless steel brackets for mounting the fixture on ceilings or as a pendant.
Material compatible with food industry environments. Mounting is also possible at low or very low temperatures (instant start and no flux decay). For applications with direct exposure to sunlight, we recommend using Forma LED. Check the compatibility between the material constituting the product and the space where it will be installed.
Dorno
Equipped with quarter-turn system for easy electrical connection. Pull-out terminal with quick cable connector
LIGHT: NO GLARE
966 Dorno
acc. 978 wall bracket galvanized 998078-00
Made of galvanized steel. For installation of Dorno LED fixtures on walls.
acc. 6036 universal conn. galvanised 132987-00
Made of galvanized steel. To install non-corrosive fixtures on track art. 6000.
Continuous row installation with cable and special lighting fitting
For the installation in continuous row, order the special body with subcode -0072.
Note: the last fixture of the row must be of the standard type.
Thema
Housing: injection moulded, in grey polycarbonate, shatter-proof, UV-stabilised, highly resistant to mechanical impacts thanks to the reinforced structure with internal ribbing.
Diffuser: injected moulded in polycarbonate with internal ribbing for greater lighting control, in V2 self-extinguishing, UV-stabilised material; its smooth outer finish makes cleaning easier and increases lighting efficiency. Equipped with stainless steel screw clamping.
Reflector: in galvanised steel, previously stone-enamelled with UV-stabilised polyester resin. Clamping device manufactured directly onto the housing.
Standard supply: eco-friendly and anti-aging expanded polyurethane injected gasket. The fixing brackets for ceiling and suspension mounting are in stainless steel. Socket-plug connector. The fixture is secured to the fixing brackets through quick connectors. For installations with direct exposure to sunlight, we recommend using Forma LED.
Standard stainless steel mounting bracket
Stainless steel safety screw-type clamping. It can be opened to replace the batteries as needed. Injected gasket in anti-aging and eco-friendly material.
Perfect alignment of the lighting fittings is achieved using moulded guiding notches.
Upon request:
• with radar sensor for ON-OFF fixtures: subcode -19 (with default setting);
• with emergency wiring with centralized power supply: sub-code -0050. (the ceiling lamps are supplied with a single power outlet capable of managing both standard power mode and emergency-EM mode)
As standard, art. 970 Thema with subcode -0072 comes with pass-through wiring and connectors for installation in continuous line with cabling. Note: the last fixture of the row must be of the standard type.
acc. 6036 universal conn. galvanised 132987-00
Made of galvanized steel. To install non-corrosive fixtures on track art. 6000.
acc. 975 protection guard white 1300mm 165564-00 White plastic-coated steel rod. To be installed directly on the ceiling.
acc. 938 junction sleeve grey 998073-00
Polycarbonate, for jointing and transit of power supply cables (internal Ø 13 mm) between lighting fixtures (max distance 30 m). 2 per pack.
acc. 978 wall bracket galvanised 998078-00
Made of galvanized steel. For installation fixtures on walls.
