Tips To Spot & Fix Foundation Wall Leak

Tips To Spot & Fix Foundation Wall Leak Basement Waterproofing Company

Introduction It is quite common to come across a leaking basement wall in your home. Many think that leakage in the wall is due to some extraordinary catastrophe or it has not been built in a proper way. Well, it’s just a matter of time and forces of nature that are responsible for such basement leakage problems.

Spot Foundation Leakages

Reason Of Foundation Wall Leak To analyze the reason behind the foundation wall leak it is vital to know that there are sources and causes of leaks. First of all, it is the natural occurrences which take place outside the basement and secondly, these are the flaws or the disturbances in the foundation structure.

How To Spot Leak First off all you need to figure out the source from where the water is coming. A plumbing leak has to be fixed here because fixing the foundation wall will not solve the problem. Once you determine that the cause of leakage is the foundation wall then you can go ahead and repair the wall leak.

Things To Consider When Leak Found ● Stop the water from making its way to the foundation wall ● Fill the voids in the foundation from where the penetration of water is taking place ● And keep a control over the water which has reached the basement, so it should not reach the floor of the basement.

Locate The Leak On the Wall The next thing is to consider is the location of the leak in the foundation wall. It is important to locate the leak location else it may hinder the other approaches taken towards the repair. For example, if there is a crack behind the heater (to heat water) which is leaking which is not accessible from inside then there will be a need to stop the wall from the outside.

Location Of The Leak On Wall

Foundation Type The other important thing is foundation type. If the concrete wall is hollow then with the help of water to fill the void is not a feasible way to repair.

Precisely, choosing the most suitable basement leakage solution to fix the leak in the foundation is not straightforward always. It is usually simple.

Steps To Waterproof The Wall 1. Excavate the foundation wall and clean it 2. Fill the cracks with hydraulic cement 3. Use the elastic rubber membrane and foundation wrap to coat the foundation walls 4. Now remove and replace the existing weeping tile 5. Now fill the soil again and make it compact

Another Way To Fix The Wall People wonder that why they need to dig the foundation when the entire leaking is a foundation crack or just a minor leak.

Well, in such situations, there are two obvious choices: â—? Excavate the exterior wall where you see a crack and then seal it from outside â—? From the interior, you need to pressure inject the cracks so the existence of the cracks is eliminated

Basement Foundation Repair Both these basement foundation repair solutions will fix the foundation leak permanently and these methods work appropriately as long as the repairs are done in a proper manner by knowledgeable and experienced technicians.

When it comes to repairing the exterior foundation crack you will need to follow the same steps. It will be just like general basement waterproofing.

Conclusion The basement leak location, crack size, moisture presence on the wall and the area that has to be repaired needs to be considered to get the most ultimate repair solution. To choose the best repair method, it is beneficial to search for basement waterproofing companies near me and work with expert technicians. Thus, you can get the most effective solution for the specific wall leak in the basement.