Basic Signs of Damaged Starter Relay in the Dodge Cummins by Jeffersonville Experts

BASIC SIGNS OF DAMAGED

STARTER RELAY IN THE DODGE CUMMINS BY JEFFERSONVILLE EXPERTS

Starter relay is designed to redirect power from the battery to the starter solenoid

It acts as a switch for the starter solenoid and the starter motor in a Dodge Cummins.

Starter relay becomes faulty and causes a lot of troubles such as the vehicle will not start.

DUE TO NUMEROUS REASONS, THE STARTER RELAY OF THE DODGE CUMMINS IS DAMAGED:

CORRODED CONTACTS FAULTY CIRCUIT TOO OLD RELAY

The following points define the signs of a damaged starter relay in the Dodge Cummins.

STARTER RELAY REMAINS ON

When you switch on the ignition key, the starter relay switches on and operates the starter solenoid.

If the starter relay is faulty, then it remains on even after the engine has started.

Vehicle fails to start

Fails to start the vehicle is one of the signs of a damaged starter relay in the Dodge Cummins.

If the switch on the ignition remains silent, it means no current flows through the coil.

IRREGULAR FAILS WITH ENGINE STARTING

Build-up of dirt and debris on the contacts of starter relay cause problems while starting the engine.

In this condition, the build-up dirt can decrease the current flowing through the circuit.

RAPID CLICKS FROM THE STARTER RELAY

Rapid clicks show the starter relay is not delivering enough current to attract the armature.

A series of clicks due to the conductivity of contacts can minimize the amount of current flowing.

In an automotive ignition system of Dodge Cummins, the starter relay is a very important component.

When the relay fails, it can mean the pickup truck is not starting and need immediate repair by a mechanic.

GET IN TOUCH

ADDRESS 2207 DUTCH LN, JEFFERSONVILLE, IN 47130

PHONE 812-301-7041

WEBSITE https://dieselpickuppros.com/