Vulcan Gas Convection Oven Troubleshooting

Vulcan Gas Convection Oven Troubleshooting Convection ovens are hotter and cook faster than conventional ovens. With the many advanced features in the Vulcan gas convection ovens, we are getting yummier baked goods, meats and more. However, over a long period of usage, it gets problems. When something goes wrong with your Vulcan gas convection oven, you need to know how to fix it. So, we are here to help you by giving some Vulcan gas convection oven troubleshooting tips.

Blower Motor Does Not Run in "Cool Down or ON" Position Look at the following things to resolve this problem.

Variations in the line voltage.

Malfunction with the power switch.

Switch, S3 malfunction.

Malfunctioning with the interconnecting wiring.

Check for the inoperative motor.

Blower Motor Run in "Cool Down", but not in "ON" Position See if there is a malfunction with the door switch.

Verify the interconnecting wiring. If it is wrong, you need to adjust the connections.

Power switch contacts might be inoperative.

Gas Doesn't Ignite/ No Spark/ No Ignition Light ON Check for the shorted electrode on ignitor or flame sense.

Heat relay, R3 might have malfunctioned.

A high voltage ignitor cable is opened.

An inoperative transformer might be caused the issue.

The high limit thermostat could be opened.

Check for the malfunction of interconnecting wiring.

Sometimes, it might be caused by an ignition module.

Sparks but Gas Doesn’t Ignite The gas solenoid valve may be in OFF or inoperative mode.

Check if the manual gas valve is closed.

There might be insufficient gas pressure and gas supply OFF. A faulty ignition module could be caused your oven gas does not to ignite.

Also, inspect for interconnecting wiring malfunction.

Gas ignites but will Not Maintain Flame If your convection oven is not maintaining flame, there might be an issue with the ignitor. Hence, check for the following: Malfunction with the ignitor lead connections.

Check whether the ignitor ground is operative or not.

There could be insufficient gas pressure.

Ignitor or flame sense malfunction.

Snorkel vent plugged, obstructed or missing.

Incorrect polarity from the transformer to the ignition module.

Vulcan Gas Convection Oven Doesn’t Heat When your oven is not producing heat or not cooking your food perfectly, you have to check the malfunction of the high limit switch, probe, and control. You will need to replace these components if necessary. It is used for computer control models.

Vulcan Full Size Gas Convection Oven Error Codes The error code will display on the oven's display. It will alternate between the code and the unit's cavity temperature. If you didn't find the error on display, check for environmental noise, electrical noise or vibration.

Er01 - ROM Checksum Error It will be caused by an internal ROM malfunction. You can fix this error with the cycle power.

Er02 - RAM Checksum Error Because of internal RAM malfunction, Er02 will occur. With cycle power, it is able to fix the problem.

Er03 - Ambient Sensor Error If the ambient temperature is below 32 degrees Fahrenheit, you can get this error code.

So, you need to verify the ambient temperature at the control.

Er04 - Configuration Error It will occur because of microprocessor malfunction. Cycle power might be the solution.

Er05 - EEprom Error It indicates that the power loss while storing data.

Er06 - Zone 1 A/D Underflow Error When an incorrect sensor type is used or measuring temperature is outside the specified range, the 06 code occurs.

Final Words Hopefully, this Vulcan gas convection oven troubleshooting guide will help you to fix the problems yourself and save money. However, we may not be covered solutions for some other Vulcan convection oven problems. If you didn’t get the fix, refer to your oven’s model Vulcan manual.