INTERNSHIP FOLIO- MORPHOGENESIS ARCHITECTS- DEVANSH GOSHAR

WORKING DRAWINGS, COORDINATION & DESIGN REFINING

GA PLAN FOR TYPICAL FLOOR, STILIT FLOOR & REFUGE FLOOR

TYPICAL COLUMN SET-OUT PLAN

STILT LEVEL RCP PLAN

TYPICAL BEAM SLEEVE SET-OUT PLAN

STILT LEVEL MASONARY SET OUT PLAN

The project consists on 6 towers that are located around the periphery of the site, instead of making 6 individual towers, the towers are grouped in sets of two. This makes the buildings narrower but allows for greater open space in the middle.

This open space was is skillfully landscaped to create an open space for people to enjoy and facilitate activities.

The project has a green vision by several active and passive means. Room Size Ratio to Window Ratio, Design of Extensions, Larger Open Area, Water Retention, Solar Panels, Septic Tanks & Smarter Waste Management. Further more the entire facade is made using aluminum formwork to avoid water seepage during torrential rains

ELEVATION A & B FOR TOWER A1/A2

SECTION BB & SECTION CC FOR TOWER A3/A4

DETAILS

SPOT DETAILS FOR A3/A4

FIRST FLOOR PLAN

FRONT ELEVATION

SECTION

CAR PARKING TOWER

DESIGN DEVELOPMENT - REFINING CONCEPT DESIGN

Ramps, Edge Condition, Walkability & Landscape

Jaali Patterns & Shading Devices

The project is a part of a larger master plan which too is designed by Morphogenesis.

This phase consists of 6 towers each of 24 floors, I received the opportunity to work on design development phase of this project. It included refining and making the concept design functional. It looked at circulation detailing, facade, jail patterns & detailing, detailing of pop up’s and shading system, materials junctions, levels & interior design. Finally it also included the refining of the club house in terms of facade, planning, internal spaces & interior design.

Pop Ups

DESIGN DEVELOPMENT - CLUB HOUSE

The Club-House was the stand-out structure for this process and the challenge was to make this design concept more cost eective, thus several studies has to take place on where cost could be saved : detailing, cladding and structure. I worked on designing the facade details to maximize aesthetic but save cost wherever possible, skylights, staircase design, terrace utility & defining the technical aspects such as window sizes, ramp sizes and area, extent of walls etc..

FACADE DEVELOPMENT

Cost eective detailing as Beam and Columns are flushed

More expensive options are used only in critical places, to increase aesthetic quality and reduce cost.

DESIGN DEVELOPMENT & INTERIORS - CLUB HOUSE

INTERIOR DESIGN

CONCEPT DESIGN - PRESENTATION OF SITE SECTION

SITE SECTION- SHOWS RELATION OF OPEN SPACES WITH EDGE CONDITION

CONCEPT DESIGN - PRESENTATION OF SITE SECTION

SITE SECTION- SHOWS RELATION OF SERVICE CORE TO USEABLE SPACE

CONCEPT DESIGN -HOTEL- REVISION OF SPACES

Lobby Level Plan & Banquet and Business Centre Level Plan

CONCEPT DESIGN -HOTEL- REVISION OF SPACES

Plan for Recreation Floor & Typical Hotel Floor plan

CONCEPT DESIGN - PLAZA & STRAMP

The plaza acts as a binding feature to the two commercial buildings hovering above the parking, the idea was to create a podium that felt as a part of the same plane. My concept of pushing a part of the podium down using steps and a well integrated strap was taken forward. I got the opportunity to design this part of the project. The steps and stramp broke the monotony of normal steps and the stepped portion allowed for one to achieve a better link with the plaza on the top which was the most active social space. The steps where designed in such a way as to create a vista to the building facade opposite, in a way framing the building.