Tread

tread

IP 20 extruded LED step bull nose trim ETL listed indoor use.

the interior lighting division of designplan lighting, inc.

79 Trenton Avenue 79 Trenton • Frenchtown, Avenue • Frenchtown, NJ 08825 • Tel: NJ (908) 08825996-7710 • Tel: (908) • Fax: 996-7710 (908) 996-7042 • Fax: (908) 996-7042 www.designplan.com www.designplan.com The products shown The products in this catalog shown in are this designed catalog and are designed engineered and byengineered ARES s.r.l.by They ARES are s.r.l. assembled They are under assembled license by under Designplan license by Lighting, Designplan Inc. Lighting, Inc.

. Extruded aluminum body . White or blue LEDs. 2.25W per foot . Requires a remote 24V DC power supply

. Extruded Duro SBR rubber “anti slip” pad

. Extruded acrylic lens . Mounting screws hidden below the “anti slip” pad

. Dimmable with 0-10V dimming. avail

able with 2 circuit dimming for up/down version on request.

tru

. Rated IP20 . ETL listed for indoor use. . Complies with LM79 and LM 80 . Special lengths on request . Made in the USA. complies with ARRA

tread up light only

Ordering information ELECTRICAL

TRU TRB TRD

CUSTOM

For TRB specify 1 or 2 circuit wiring. Power supply and dimming module ordered seperately.

trb

trd

tread up and down light

tread down light only

Protection: Meet UL 1310 for Class 2; Inherent short-circuit protection, self limited; overload protected; 3.2kv hz output isolation

Power supplies

60W Single Output Switching Power Supply

PPLT 00090 60W 120V only

6.25 “L X 3.81�W X 1.5� H

Â? Â?

‚ � F

PPLT 00093 100W 120V-277V 9.5’L x 1.7�W x 1.18’H

SPECIFICATION MODEL

OUTPUT

S-60-5

S-60-12

DC VOLTAGE

5V

12V

RATED CURRENT

12A

5A

CURRENT RANGE

0 ~ 12A

0 ~ 5A

RATED POWER

60W

60W

RIPPLE & NOISE (max.) Note.2 120mVp-p

120mVp-p

VOLTAGE ADJ. RANGE

10.8 ~ 13.2V

VOLTAGE TOLERANCE Note.3

4.75 ~ 5.5V 2.0%

1.0% 100W Single Output Switching Power Supply 0.5% 0.5%

LINE REGULATION

1.0%

LOAD REGULATION

PPLT 00086 100W 120V only

Figure D

7.83�L x 3.85�W x 1.5�H

INPUT

PROTECTION

0.5%

SETUP, RISE TIME

300ms, 50ms/230VAC

HOLD UP TIME (Typ.)

80ms/230VAC

VOLTAGE RANGE

85 ~ 264VAC

800ms, 50ms/115VAC at full lo

12ms/115VAC at full load

FREQUENCY RANGE 47 ~ 63Hz

EFFICIENCY(Typ.) 73% 76%

AC CURRENT (Typ.) 2A/115VAC 1A/230VAC INRUSH CURRENT (Typ.) COLD START 20A/115VAC 40A/230VAC LEAKAGE CURRENT <3.5mA / 240VAC Â Â?

105 ~ 150% rated output power OVERLOAD Â&#x201A; AdvanceProtection â&#x20AC;˘ 10275 W. type Higgins Road â&#x20AC;˘ Rosemont, IL 60018 : Hiccup mode, recovers automatically afte

Tel: 800-322-2086 â&#x20AC;˘ Fax: 888-423-1882 â&#x20AC;˘ Customer Support/Technical Servi

13.8 ~ 16.2V

5.75 ~ 6.75V 320W Single Output with PFC Function www.advancetransformer.com Protection type : Hiccup mode, recovers automatically afte

OVER VOLTAGE

-10 ~ +60

WORKING TEMP.

PPLT 00087

8.46â&#x20AC;?L x 4.53â&#x20AC;?W x 1.97â&#x20AC;?H

300W 120v only

Â

120 ~ 370VDC

WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY

(Refer to output load derating curve)

20 ~ 90% RH non-condensing

-20 ~ +85 , 10 ~ 95% RH

0.03%/ (0 ~ 50 ) TEMP. COEFFICIENT

10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each alon VIBRATION SPECIFICATION

UL1012, UL60950-1, TUV EN60950-1 approved SAFETY STANDARDS MODEL S-100F-5 S-100F-7.5 S-100F-12 WITHSTAND VOLTAGE I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC

SAFETY & 7.5V Ohms/500VDC 12V DC VOLTAGE ISOLATION RESISTANCE 5V I/P-O/P, I/P-FG, O/P-FG:100M Â?

EMC RATED CURRENT 20ACompliance to EN55022 13.5A (CISPR22) Class B 8.5A EMI CONDUCTION & RADIATION (Note 4)

HARMONIC CURRENT to EN61000-3-2,-3 0 ~Compliance 20A 0 ~ 13.5A 0 ~ 8.5A CURRENT RANGE IMMUNITY RATEDEMS POWER

Dimming module (2 required for 2 circuit dimming Consult factory)

Â&#x20AC; Â? Â&#x201A;

Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, 100W 101W 102W E

MTBF

316.2K hrs min. MIL-HDBK-217F (25 RIPPLE & NOISE (max.) Note.2 100mVp-p 125mVp-p OTHERS DIMENSION 159*97*38mm (L*W*H)

OUTPUT

NOTE

VOLTAGE ADJ. RANGE PACKING

4.5 ~ 5.5V

)

6.75 ~ 8.25V

0.51Kg; 24pcs/13.1Kg/0.7CUFT

Â&#x2C6; Â Â&#x201A;

125mVp-p

10.8 ~ 13.2

VOLTAGE TOLERANCE Note.3 2.0% 1.0% 1.0% Â&#x192; Â&#x201E; Â&#x2026; Â&#x2020; Â&#x201E; Â&#x201E; Â&#x201A;Â&#x2021; Â&#x2C6; Â&#x2030;

Â&#x201A;Â&#x192; Â&#x2039; Â&#x152; Â&#x201E; Â&#x201A; Â&#x17D;­Â&#x20AC; Â? Â&#x201A;Â&#x2018; Â?  Â?

0.5% 0.5% 0.5% LINE REGULATION Â&#x2021;Â&#x192; Â&#x2020;

Â&#x2030;

Â&#x192;

1.0% 0.5% 0.5% LOAD REGULATION Â&#x2019;Â&#x192; Â&#x2020; Â?

Â&#x201E; Â? Â? Â? Â&#x201C;Â&#x17D; Â&#x192; SETUP, RISE TIME SPECIFICATION

MODEL

HOLD UP TIME (Typ.) VOLTAGE RANGE DC VOLTAGE FREQUENCY RANGE RATED CURRENT

INPUT

EFFICIENCY (Typ.) CURRENT RANGE AC CURRENT (Typ.) RATED POWER INRUSH CURRENT (Typ.)Note.2 RIPPLE & NOISE (max.)

1000ms, 30ms at full load

20ms at full load SP-320-3.3 SP-320-5 SP-320-7.5 SP-320-12 S 88 ~ 132VAC/176 selected by12V jumper or swit 3.3V 5V ~ 264VAC 7.5V 1 47 55A~ 63Hz 076% ~ 60A

40A 25A 80% 0 ~ 55A 78%0 ~ 40A 0 ~ 25A 3.15A/115VAC 181.5W 275W 1.5A/230VAC 300W 300W COLD START150mVp-p 20A/115VAC150mVp-p 40A/230VAC 150mVp-p 150mVp-p 55A

2 0 2

1 <1mA / 240VAC 3.14 ~ 3.63V 10 ~ 13.2V 1 4.5 ~ 5.5V 6 ~ 9V ~ 150% rated VOLTAGE TOLERANCE Note.3 105 1.0% 2.0%output power 2.0% 1.0% OVERLOAD Protection type0.5% : Hiccup mode, recovers automatically LINE REGULATION 0.5% 0.5% 0.3% PROTECTION 5.75 10.13V 13.8 ~ 16.

1.5%~ 6.75V 1.0% 8.63 ~1.0% 0.5% LOAD REGULATION OVER VOLTAGE Protection type : Hiccup mode, recovers50ms/115VAC automatically 800ms, 50ms/230VAC 2500ms, SETUP, RISE TIME OUTPUT

LEAKAGE CURRENT VOLTAGE ADJ. RANGE

WORKING TEMP. HOLD UP TIME (Typ.) WORKING HUMIDITY Note.5 VOLTAGE RANGE TEMP., HUMIDITY ENVIRONMENT STORAGE FREQUENCY RANGE TEMP. COEFFICIENT POWER FACTOR (Typ.)

311

-10 ~ +60 (Refer to16ms/115VAC output curve) 16ms/230VAC at full load TRD 0 load derating 20 ~ 90% RH non-condensing 88 ~ 264VAC 124 ~ 370VDC

-20~~63Hz +85 , 10 ~ 95% RH 47 0.03%/ (0 ~ 50 PF>0.95/230VAC PF>0.98/115VAC at full load