Case Excavator Cx210c Operator Manual
Full download: http://manualplace.com/download/case-excavator-cx210c-operator-manual/
Part number 47362009
2nd edition English May 2012 Replaces part number 84551237
This is the cut pages sample. Download all 288 page(s) at: ManualPlace.com
OPERATOR’S MANUAL CX210C Tier 4 Crawler Excavator
GENERAL INFORMA TION
FOR W ARD CONTROLS
Hand control levers and pedals 3 - 9 Windshield 3Front lower window 3Front right - hand console . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 -
System display and function control panel 3Monitor switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Menu screen display 3Diesel particulate dif fuser (DPD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents
1
rules
rules
Note the Owner
Product identification
Left, right, front and rear the machine
Electro - magnetic interference (EMC)
Description the main components
-
rules
Safety decals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.
. . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . 2 - 8 Hand signals 23 CONTROLS / INSTRUMENTS ACCESS T O OPERA T OR'S PLA TFORM Frame - Access / Exit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 -
the operator
OR'S
suspension seat
Safety
1 - 1 Safety
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 2
1 - 3
1 - 5
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 8
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 8
1
9 2 SAFETY INFORMA TION Safety
2 - 1
.
. .
. . . . . . . . . .
1 Position
’ s compartment controls and accessories . . . . . . . . . . . . . . . . . . . . . 3 - 3 OPERA T
SEA T Air
3 - 5
Clock adjustment
LEFT - HAND SIDE CONTROLS Left - hand control arm 3ventilation air - conditioning control 3Function cancellation lever and safety bar . . . . . . . . . . . . . . . . . . . . . . . . . . .
. .
3Cab internal lighting 3Emergency exit hammer . . . . .
. . .
. . 3T ool quick coupler locking and unlocking control switch (except type) (optional) 3Sliding windows door . . . . . . . . . . . .
.
3RIGHT - HAND SIDE CONTROLS
3 -
3
. . . . . . .
. . . . . . . .
. . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Right - hand control arm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cab radio 3Right - hand console 3 -
Coat hanger hook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 -
Cup holder 3 -
REAR W ARD CONTROLS
Fuse box 3Magazine rack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 -
Refrigerated / heated compartment 3Storage compartment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 -
OVERHEAD CONTROLS
Roof curtain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 -
Roof hatch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 -
Sun shield (optional) 3 -
EXTERIOR CONTROLS
Fuel tank 3 -
Rear view mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 -
Rear view camera 3 -
Front storage box 3 -
Side doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 -
Engine hood 3 -
Lower panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 -
Windshield washer reservoir . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 -
Load handling eyes (except type) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3T owing holes 3 -
Safety valves (optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 -
Optional tool supply valves (optional) 3 -
Fuel tank filler pump (if equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 -
Cab protection (ROPS and FOPS) 3 -
TING THE UNIT
3 -
4 OPERA TING INSTRUCTIONS COMMISSIONING THE UNIT Cab - Operating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
- 1 Cab - Running - Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
- 3
4
4
Anti - theft protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 4 Starting the engine 4 - 7 Bringing the machine operating temperature 4 - 9 Engine operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Operating the machine hot cold weather 4 - 1 1 Machine operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 -
OPPING THE UNIT
Stopping the engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 -
MOVING THE UNIT
Machine travel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 -
Handling the machine 4Load handling (except type) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 -
Operating the machine 4Quick coupler (except type) (optional) 4 -
Lowering the attachment the event a failure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 -
Adjustment and mounting rear view mirrors 4 -
hydraulic circuits (except type)
. . . . . . . . .
levers
ARKING
UNIT
the machine
5 TRANSPOR T OPERA TIONS PREP ARING FOR ROAD TRANSPOR T Locking the long reach attachment for transport (LR type)
. . . . . .
SHIPPING TRANSPOR T T ransporting the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 2 RECOVER Y TRANSPOR T T owing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 7 6 MAINTENANCE GENERAL INFORMA TION Basic instructions 6 - 1 Fluids, fuels and lubricants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 5 Fluid capacities and lubricant specifications 6 - 9 Grease points . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Levels 6Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6Cooling system 6Fuel system . . . .
Releasing pressure the hydraulic system
Hydraulic circuit .
Air filter
Swing reduction gear
T ravel reduction gears 6T racks
T rack rollers and idler wheels
Auxiliary
.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Optional hand control
configuration 4P
THE
Parking
4 -
. .
. . . . . . . . . . . . . . . . . . . . 5 - 1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 -
6 -
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 -
6 -
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 -
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 -
6 -
Radiator and coolers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 -
Fan and alternator drive belt 6 -
Adjustment engine valve rocker clearances 6 -
Fuel tank filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Fire extinguisher (not supplied) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 -
Protecting the Electrical / Electronic Systems During Charging W elding 6Cab protection (ROPS and FOPS) (optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 -
Machine inspection and cleaning 6 -
Checking the machine settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 -
Plastic and resin parts 6 -
Checking the cylinders for leaks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 -
T ooth tip wear limits the backhoe bucket 6 -
Replacing a tooth a backhoe bucket 6 -
Replacing a backhoe bucket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 -
Checking the opening the quick coupler locking hook (except type) (optional) 6 -
Air conditioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 -
Diesel particulate dif fuser (DPD) 6 -
Gas spring inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6T orque Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Fuses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 -
Batteries
Alternator
Starter motor
Bulb replacement
Maintenance Chart
ORAGE Preparing for storage
Periodic checks .
Starting after storage .
7 TROUBLESHOOTING F AUL T CODE RESOLUTION Engine troubleshooting 7 - 1 8 SPECIFICA TIONS General specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 1 Noise level 8 - 4 W eight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 4 Dimension 8 - 5
6 -
6 -
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 -
6MAINTENANCE CHAR T
6 -
6 -
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 -
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 -
1 - GENERAL INFORMA TION
Safety rules
Personal safety
This the safety alert used alert you potential personal injury Obey all safety messages that follow this symbol avoid possible death injury
Throughout this manual you will find the signal words W and CAUTION followed special structions. These precautions are intended for the personal safety you and those working with you. Read and understand all the safety messages this manual before you operate service the DANGER indicates a hazardous situation not will result death serious injury W ARNING indicates a hazardous situation not could result death serious injury
used with the safety alert indicates a hazardous situation not could result minor moderate injury
F AILURE T O FOLLOW DANGER, W ARNING, AND CAUTION MESSAGES COULD RESUL T DEA SERIOUS INJUR Y .
Machine safety
NOTICE: Notice indicates a situation which, not avoided, could result machine property damage.
Throughout this manual you will find the signal word Notice followed special instructions prevent machine property damage. The word Notice used address practices not related personal safety .
Information
NOTE: Note indicates additional information which clarifies other information this
Throughout this manual you will find the word Note followed additional information about a step, other information the The word Note not intended address personal safety property
1 - GENERAL INFORMA TION
1 - 1
Safety rules
CALIFORNIA PROPOSITION W ARNING
Diesel engine exhaust and some its constituents are known the State California cause cancer , birth defects and other reproductive Battery terminals and related accessories contain lead and lead
W ash hands after handling
1 - GENERAL INFORMA TION
1 - 2
Note the Owner
Improper operation this machine can cause injury death. Before using this machine, make certain that every operator:
• instructed safe and proper use the
• Reads and understands the Manual(s) pertaining the
• Reads and understands ALL Safety Decals the
• Clears the area other
• Learns and practices safe use machine controls a clear area before operating this machine a job your responsibility observe pertinent laws and regulations and follow CASE CONSTRUCTION instructions machine operation and maintenance.
Y our machine has been designed and built the highest standards quality conforms all current safety ulations. However , the risk accidents can never completely excluded. That why essential observe elementary safety rules and Read this manual carefully , paying particular attention the instructions concerning safety , operation and nance avoid the risk injury while operating servicing the
The standard attachments and tools this machine are designed carry out all kinds earthmoving and dling you want use this machine handle a load make sure that designed carry out this kind For this type the machine must equipped with safety valves, a load handling chart corresponding the type machine and its attachment and a load fixing point. All legal requirements must also strictly not use this machine for any application purpose other than those described this manual. the machine used for work involving the use special accessories consult your CASE STRUCTION Dealer order make sure that any adaptations modifications made are keeping with the technical specifications and with prevailing safety
Any modification adaptation which not approved the manufacturer may invalidate the initial mity with safety
The machine must undergo regular the frequency which varies according the type Consult your CASE CONSTRUCTION Dealer .
1 - GENERAL INFORMA TION
A
The engine and fuel system your
T
operators and users
charges, invalid warranty
service
only Y our CASE
Dealer your disposal for any further
sales service you may and genuine CASE
customer assistance also
Y can obtain manuals the operation, maintenance and repair your
your CASE
Dealer
and
CASE
Dealer for
the
for your Y our CASE
Dealer can provide
sales service and genuine CASE
your guarantee quality and
units
1 - 3
TTENTION:
machine designed and built government emissions
ampering
STRICTL Y PROHIBITED W Failure comply could result government fines, rework
, legal action and possible confiscation the machine until rework original condition Engine
and / repairs must done a certified technician
CONSTRUCTION
will also provide any after -
CONSTRUCTION spare your guarantee quality and match. CASE CONSTRUCTION
available. Call 1 - 866 - - CASE6 - 866 - 542 - 2736) email
machine from
CONSTRUCTION
T o ensure quick
ficient consult your
CONSTRUCTION
assistance ordering
correct manuals
CONSTRUCTION
after -
CONSTRUCTION spare
CNH America LLC Company reserves the right make changes the specification and design the machine without prior notice and without incurring any obligation modify
previously The description the models shown this manual has been made accordance with the technical specifications known the date design this
All data given this manual subject production Dimensions and weights are provided with mate values and the machine fitting shown the illustrations may not correspond with standard For precise information specific machine models and please consult your CASE CONSTRUCTION Dealer
Reproduction even prohibited without written authorization from CNH America LLC pany
Copyright 2012 CNH America LLC
Issued May 2012 Dealer ’ s stamp BLANCTPB1 1
CNH America LLC 53404
1 - GENERAL
INFORMA TION
1 - 4
1 - GENERAL INFORMA TION Product identification CX210C (LC type and NLC type) hydraulic crawler excavator 2CA3F1B6 1 CX210C (LR type) hydraulic crawler excavator C369E9D1 2 Pin plates When ordering obtaining information always supply your CASE CONSTRUCTION Dealer with the type and serial number your machine W rite the following the spaces below: the serial number and year manufacture your accessories and the serial numbers the various hydraulic and mechanical Machine (1) T ype / Model and Category: (Hydraulic Excavator) CX210C (2) Product identification number: QC3CE6 - 003N 3 1 - 5
1 - GENERAL INFORMA TION
E4E41F 6 1 - 6
Engine Make and type: ISUZU - 4HK1X Serial number: A TTENTION: The engine and fuel system your chine designed and built government emissions T ampering operators and users STRICTL Y PROHIBITED W Failure comply could result government rework invalid warranty , legal action and possible confiscation the machine until rework original condition Engine service and / repairs must done a certified technician only F77BYM - 002 4 Diesel Particulate Dif fuser (DPD) (1) Catalyzed soot filter serial number: Filter which has the function purify exhaust gas with oxidation (2) Diesel oxidation catalyst serial number: Oxidation catalyst for diesel DPD00001A 5 Component serial numbers Hydraulic pump: Swing reduction gear: T ravel reduction gears: T ravel control valve: Attachment control valve: Swing control valve: Cab protection FOPS (Falling Objects Protective Structure) (optional) Complies with ISO 10262 level 2 standard. Identification number:
Structure protection (ROPS) (Roll Over Protective Structure)
Complies with ISO 121 - 2
Product number: 15UUEH - 001 7
Quick coupler (except type) (optional)
(1) Serial number: (2) W eight: (3) W orking pressure: (4) T ype: (5) Part number: (6) Date manufacture: (7) SWL (Safe W orking Load): QC0001 8
1 - GENERAL INFORMA TION
1 - 7
Left, right, front and rear
the machine
The terms - hand", - hand", and are used this manual indicate the sides they are seen from the seat when the cab over the idler
TTENTION: The illustration opposite shows the machine normal travel normal travel the cab over the idler wheels. The travel reduction gears are the rear the
Electro - magnetic interference (EMC)
Interference may arise a result add ‐ equipment which may not necessarily meet the required such interference can result serious malfunction the unit and / create unsafe you must observe the following:
• The maximum power emission equipment must not exceed the limits imposed the national authorities the country where you use the
• The electro ‐ magnetic field generated the add ‐ system should not exceed V / m any time and any location the proximity electronic components.
• The add ‐ equipment must not interfere with the functioning the board Failure comply with these rules will render the CASE CONSTRUCTION warranty null and void.
1 - GENERAL INFORMA TION
(A)
(B)
(C)
(D)
(E) T ravel motors (F) Idler wheels 6280D20D 1
A
Front
Rear
Right - hand side
Left - hand side
1 - 8
Description the main
1 - GENERAL INFORMA TION
components The CX210C a totally hydraulic excavator . consists undercarriage fitted with tracks and a turntable bearing which supports the upperstructure The upperstructure frame supports the the front end the plus the hydraulics and When the operator works the the engine - driven pump delivers hydraulic fluid the control The control valves distribute the hydraulic fluid the various cylinders and hydraulic motors A cooling system maintains the hydraulic fluid normal operating P55R - 001 1 Backhoe bucket Connecting rod Y okes Backhoe bucket cylinder Arm Arm cylinder Boom Boom cylinders Swing reduction gear Fuel tank 1 Hydraulic reservoir Control valve Hydraulic pump Engine compartment Counterweight Air filter Batteries T racks T ravel reduction gears Lower rollers Upper rollers T ension shock absorbers 23. Idler wheels Cab / compartment 25. Swing components 1 - 9
1 - GENERAL INFORMA TION 1 -
2 - SAFETY INFORMA TION
Safety rules
Y our safety and that people around you depends essential that you understand this manual for the correct lubrication and nance this
Read this manual carefully and check that:
• Y understand fully the symbols the controls and the safety signs used this manual and the
• Y understand fully the speed, stability , braking and steering characteristics the you are any consult your CASE TION Dealer
The safety messages this manual concern situations which may arise during normal machine operation and These safety messages also indicate the ferent ways coping with these Other safety messages are used throughout the manual indicate specific
Whatever type work being done the safety measures for private public worksites are those which conform current regulations the country the type operation concerned (for example: underground
The safety instructions given this manual are a mary the basic rules respected all times and not exempt you from insurance requirements from abiding the highway
Always keep this manual the location provided for that purpose (behind the operator ’ s Make sure ways complete and good you wish tain extra copies languages other than that the country consult your CASE CONSTRUCTION Dealer .
2 - SAFETY INFORMA TION
YLNR3P - 002 1 2 - 1
Before using the machine
• Check all controls and safety devices a open area before starting
• A void loose fitting clothing, loose uncovered long hair , jewelry any other items which could get caught machinery
• Dif ferent types job will require dif ferent types protective Items such hard safety shoes, heavy gloves, reflector type jackets, ear protection and eye protection may Before starting a determine what protective equipment will necessary Use this equipment all
• Keep away from dangerous areas such rocky Make a survey the work - site and determine the possible dangers fore using the
• Before parking the machine, make sure that the ground Plan the worksite that the ground hard and
• Before moving the machine work a new walk around determine all possible causes cidents there. Holes, obstacles, debris and other danger risks the working area can cause serious injury
• not attempt operate this machine unless you have first read and perfectly understood the safety messages and instructions appearing this
• Operating the machine requires full attention and care the part the operator can avoid accidents. Get know the possibilities and tions and the working space There are areas poor visibility the working range the Have someone guide you for all areas where visibility not perfect.
• mud (in winter) ice the steps and access handles can cause Make sure they are kept clean all
• ready meet Always carry a first aid kit and fire extinguisher (not supplied) within easy reach board. Make sure the fire extinguisher regularly serviced mance with the
• Check the fastening the main components: turntable bearing and compartment. the event problems, consult your CASE CONSTRUCTION Dealer
• Make sure you understand the symbols used the machine safety Keep the decals clean that they are perfectly legible all
• Every day , inspect the machine detect any signs hydraulic fluid T ighten the connections replace any defective components necessary
• W ork out a means convenient escape from the machine (emergency exit via the windshield the rear window glass) the event the machine turning over tipping over the cab door being
• Remove any obstructions which hinder visibility . Keep the rear view mirror and windows clean all
• Make sure the windshield wiper works correctly
• Make sure you are perfectly familiar with hand nals daily use the worksite able obtain help with tight maneuvers when carrying out operations where visibility poor
• Make sure you are perfectly familiar with traf fic lations and special safety equipment requirements before transporting this machine a public way
• When loading never swing the load over the truck
• Before undertaking any travel working operations during hours make sure the lighting and signalling equipment fully
• Before any travel make sure that the doors and hoods are properly latched.
• Before undertaking any travel the job make sure the itinerary followed completely safe. bridges are make sure they are fectly capable supporting the weight the
• Check that tools other items have been left the machine (be the undercarriage the upperstructure) the
• Always steer around large obstacles such ders, big trees, etc.
• The operator must alone the machine all not allow anyone stand around the
• T o get out the cab, imperative that the perstructure frame line with the
• When alighting from getting into the always face the machine and use the steps and access
• sure you know the position and function each Incorrect operation the controls can cause serious
Quick coupler (except type) (optional)
• mandatory for the switch the locked position when operating the
• Every day , check that the locking bar functions rectly and that not fouled foreign matter Clean the locking system necessary
• you are obliged use the quick coupler with buckets not manufactured CASE TION , make sure the diameter the pins and the width between the bucket lugs meet the dimensions needed fit the quick coupler
2 - SAFETY INFORMA TION
2 - 2
Consult your CASE CONSTRUCTION Dealer
Operating the machine
Always maintain a safe margin (Be careful tool swing accidental
• T o access exit the operator ’ s the left - hand control arm must the raised Never forget this basic requirement.
• When working a public highway , use standard traf fic signs and take into consideration the ing range the upperstructure and its Local national regulations stipulate the number , type and location reflector
• A void running the engine a confined there proper ventilation must provided all
• not allow anyone else the The senger could fall cause
• Never leave the compartment while the engine running.
• T o get out the imperative that the perstructure frame line with the
• smoke mist can reduce visibility and cause Reduce speed come a complete halt until visibility has improved.
• Never jump down from the When alighting from the machine the always face the machine and use the steps and access
• Never operate the working travel controls unless you are properly seated the operator ’ s seat with the seat belt correctly
• Before starting the check the direction travel (in forward the reduction gears should the rear the machine).
• the event operating problem move the machine a safe lower the attachment the shut down the engine and remove the ignition key . Locate the problem, report sary and take the necessary steps warn others not attempt operate the
• not work near overhead high - voltage electric lines without checking beforehand that all sary measures have been taken respect the imum distances:
Less than 57000 volts: 3 m ( 9.8 ) .
More than 57000 volts: 5 m ( )
• Before tilting the seat back mandatory raise the armrests avoid any accidental ation the control levers.
Cab protection ROPS (Roll
• Study the position any existing pipelines duits before starting Electrical gas and water pipes and other underground installations can cause serious injury .
Over Protective
Structure), FOPS (Falling Objects Protection Structure, optional) and front OPG (Operator Protective Guard, optional)
• Never try weld straighten the protective
• Always make allowance for working conditions (sloping rough ground), the site and weather conditions when driving the
• not allow anyone stand the machine ing Accidental operation the ture swing control attachment control could cause accident. Stop all operations until one has moved away
• Operate all controls gradually ensure smooth chine
• Whenever load handling operations are ried out, imperative adhere strictly the structions given this manual and local
• forbidden use the machine carry out tasks other than those for which Never use the equipment for sweeping the ground level out rubble push objects (transversal stress the
• Stop the engine and remove the ignition key when the machine not even for short periods
• The working area the end attachment that mounted may interfere with the ference may caused due the type end attachment installation parts such a cab
• not modify the protective structure any way Any such addition well damage suf fered following impact reduces the protection that Replace the protective structure has suf fered impact and not attempt repair
• Incorrect inspection service work the protective structure may lead serious injury Carry out spection operations the protective structure given this the protective structure its ponents need use only those parts that are listed the spare parts catalog ing your
Quick coupler (except type) (optional)
• Never place the control switch the unlocked tion when the machine working.
• Each time a bucket installed the quick coupler , close the bucket and raise the attachment able make a visual check that the bucket pin correctly engaged the latching
• The quick coupler modifies the working range the certain attachment positions the tool
2 - SAFETY INFORMA TION
2 - 3
Full download: http://manualplace.com/download/case-excavator-cx210c-operator-manual/
may foul the Always leave a safety
• Never carry out load handling using the front rear anchoring points used install the tool the quick coupler .
• Never put your hands inside the quick coupler and never attempt adjust repair the quick coupler the engine
Parking the machine
When parking the proceed follows: Position the machine level away from soft excavations poorly shored
fore carrying out maintenance this ceed follows: Park the machine level Lower the attachment until resting the ground. Stop the engine and remove the ignition key Lock the tracks prevent any machine
• Any unauthorized modifications made this chine can cause serious injury not undertake any modifications without first consulting your CASE CONSTRUCTION Dealer Any modifications made must conformity with the technical ifications the machine and any current safety legislation
• not modify the Diesel Particulate Dif fuser (DPD) and the exhaust Changing the length diameter the exhaust pipe would versely fect the exhaust exhaust sion reduction
Place the upperstructure and the attachment line with the retract the attachment and dig the bucket into the Stop the engine and remove the ignition key
Y must place the function cancellation lever the central position (safety bar inward position) before leaving the operator ’ s
• Certain components the machine are subject type When replacing such mandatory make sure that they conform For use genuine CASE CONSTRUCTION
Lock the cab door .
Make sure that the hoods and doors are properly
Check that part the machine encroaching the highway this cannot install the necessary regulation signalling
Maintenance and adjustments
• not try service this machine unless you have first read and perfectly understood the safety messages and instructions featuring this manual.
• When carrying out service work always wear able A void loose - fitting
• Release pressure completely the hydraulic tem before disconnecting the hydraulic draulic oil escaping under pressure can cause ous injury
• Pressurized hydraulic fluid grease which trates the skin can cause serious injury T ake the necessary safety precautions (safety clothing and protection for face and hands) avoid such before using these read the instructions concerning their use. draulic fluid penetrates the call a doctor diately
• Coolant solution
A void contact with eyes and Antidote:
External: rinse thoroughly with water and remove soiled
Internal: not induce Rinse the mouth out with water Seek medical Eyes: rinse thoroughly with water and seek medical
• The pressure the track tension cylinders Follow the procedure described this manual fully for increasing reducing track
• Before doing maintenance work the machine, shut down the engine and allow cool you could
• Before commencing any work the place a not tag the right - hand control arm.
• Always wear eye protection when using a tool that might project metal Use a hammer with a soft such copper , for installing
• Badly carried out maintenance adjustments can cause serious injuries. you not understand a servicing adjustment consult your CASE CONSTRUCTION Dealer
• When carrying out a welding operation the undercarriage upperstructure carriage authorized the manufacturer and accordance with his disconnect the connect the alternator and terminal wires and connect the welding apparatus earth cable the component which the welding operation Never connect the welding apparatus the undercarriage when welding the upperstructure (or vice - Never connect the welding apparatus earth a component the hydraulic
• When using compressed air , take the necessary precautions protect your
• f the attachment raised the machine moves without operator , serious injury can
2 - SAFETY INFORMA TION
2 - 4 Case Excavator Cx210c Operator Manual
This is the cut pages sample. Download all 288 page(s) at: ManualPlace.com
