Hoyt Prevail 37 X3 _ Hoyt Archery

HUNTING PATTERNS

TARGET COLORS

Gold Medal

PREVAIL 37 X3

PREVAIL 37 SVX

PREVAIL 40 X3

PREVAIL 40 SVX

PREVAIL FX X3

313 FPS (ATA) 37" Axle-to-Axle 7⅜" Brace Height 4.8 lbs

$1,999.00 MSRP*

PREVAIL FX SVX

PREVAIL FX SD

Hoyt bows dominate tournament circuits and top podiums worldwide, year after year. We take your trust seriously, and feel a responsibility to stand at the cutting edge through ceaseless research, testing, and innovation—using input from the best archers in the world. We do all this for one specific purpose: to help you Prevail.

The Prevail series is the result of that process, boasting the XT2000 limb, SVX and X3 Cam & ½ Performance Systems, and more. You will also appreciate the additional rear stabilizer location, which is compatible with our hardlock rear stabilizer system. Our proven Shoot-Thru Riser Technology, 4-angle modular grip system, and adjustable 4position cable guard technology are just a few of the other technologies that make the Prevail Series the most advanced target bows in our 86-year history.

FINE-TUNE YOUR GRIP

Hoyt’s patent-pending modular grip system allows you to fine-tune your grip pressure by changing the angle of the grip. Every Prevail comes with 4 different grip modules: 0, +2, +4 and +6 degrees, with 0 being the standard angle. Try each one to see which angle helps you achieve a dead-center hold and best fits your shooting style and form.

PREVAIL TECHNOLOGY

HIGH-POWERED SVX AND THE ULTRA-SMOOTH X3 CAM & ½ SYSTEMS Top and bottom cams are fused together by a harness system, ensuring they fire at the exact same time, every time for ultimate consistency and accuracy. No wonder it’s the winningest cam system in Hoyt’s 80-year history. The SVX comes with 65% let-off and a full set of draw length modules with every SVX model bow that allow draw length adjustment in ½” increments. The X3 Cam & ½ is even smoother, with a less aggressive back wall. The X3 allows archers to utilize a draw stop peg for an ultra-hard wall, or remove the peg and utilize our new draw stop machined directly into the module for a softer back wall. It is available in 65% or 75% let-off, and comes standard with a rotating inner cam module for easy adjustment in ½” increments.