4. After completion of the brush peeling treatment, remove the ‘brush head’ and leave it to soak in a soapy solution for 5 minutes. Then remove the brush head and thoroughly rinse to remove all product traces. Then sterilise by either immersion in a chemical steriliser or by use of a UVC cabinet for at least half an hour. 5. The brush head may also be kept sterile between treatments by being stored in a UVC cabinet.
. Effects ‘treatment enhancement’ 1. Ensure the facial/treatment area in thoroughly cleansed. 2. Use of the ‘steamer’ or hot towels to open the pores and soften the face/treatment area prior to brush peeling. 3. After finishing the brush peeling session, cleanse to ensure no product residue remains. Then tone the skin with the appropriate product from your chosen skin care range, followed by a light moisturiser preferably with an SPF.
. CAUTION (during use) 1. Whilst the brush head is running, it is forbidden to use excessive pressure as this may cause discomfort to your client, and it will damage the ‘bristle’ brush heads and greatly reduce their lifespan. 2. Do not to use the brush peel unit with any acidic or alkaline based substances. 3. after each treatment, switch the power off and pull out the handset plug and return the handset to its holder on the trolley (after cleaning/sterilization). 4. Contraindications- Anyone who is suffering from hyper-sensitivity or has any known dermatological condition, must not be treated with the brush peel unit due to possible side effects or cross infection. 5. If the client has any broken or damaged capillary vessels in the treatment area or any skin injuries are present, do not treat with the brush peel system. 6. After each treatment the used brush head must be cleaned and sterilised immediately to prevent any possible hygiene/cross-contamination issues from occurring.
6. FACIAL STEAMER . Function 1. To soften the skin & necrotic cells prior to cleansing in any subsequent treatments. 2. Opening up the skin pore’s for deep cleansing & drawing debris to the surface. 3. Steam vapour- penetrates deep into the pores and aids the breakdown of grease, black-heads, make-up remnants as well as daily dirt and atmospheric pollution. 4. Steam vapour helps the skin to effectively release natural toxins. 5. Steam vapour helps to soften wrinkles prior to treatment. 6. Increase blood circulation, moisten the skin, improves metabolism and skin renewal. 7. Helps to treat acne, port wine stains, brighten and nourish the skin when used with herbs.
. Features This steamer has a metal casing; a double sheeted insulated base, stainless steel base, stainless steel water container and a copper vapour pipe. This makes for a compact and durable unit with a pleasant design. Its special stainless steel base provides enhanced stability and safety when the unit is hot. The unit’s components will not rust and therefore, no foreign matter can enter the water or steam unintentionally, which helps to avoid injury to the skin. The Steam nozzle is fully adjustable, and independently moveable of steamer arm. The steamer is equipped with a programmable timer for treatment duration. Has an automatic water level detector, which alarms if over filled or runs low of water, helping to prevent water spraying if the water level in over filled. The unit will automatically cut-out to prevent damage by ‘overheating’ should the unit be left unattended or misused by a user.