Truck & Machinery tenders close 4:00pm tuesday 30 november 2010
for tender scaffolding • forklift • container Inspections welcome The highest or any tender not necessarily accepted
TRUCK & MACHINERY NZ
Quantity scaffolding
inglewood
TENDER REF 16115 LOT 1: PIPE: 79 x 6500mm. 110 x 4500mm. 110 x 3400mm. 83 x 3000mm. 119 x 2400mm. 90 x 2400mm. 90 x 1900mm. 194 x 1500mm. PLANKS: 308 x 3000mm laminated. 1 x pallet of mixed shorts. 1 x pallet mixed short kick boards. LADDERS: 3 x 3000mm. 4 x 3600mm. 4 x 4200mm. 8 x 5400mm. 1 x 6000mm. OTHER: 1 x drum of joiners. 2/3 drum of doubles. 1 x drum plain steel feet.
Quantity scaffolding
TENDER REF 16116 LOT 2: PIPE: 65 x 6500mm. 129 x 3500mm. 136 x 3000mm. 106 x 2400mm. 109 x 2400mm. 179 x 1500mm, 90 x 1800mm. PLANKS: 308 x 3000mm laminated. 1 x pallet shorts. 1 x pallet mixed short kick boards. LADDERS: 3 x 3000mm. 5 x 3600mm. 2 x 4200mm. 8 x 5400mm. 2 x 6000mm. OTHER: 2 x drums of doubles. 1 x drum of singles.
2
inglewood
Quantity scaffolding
inglewood
TENDER REF 16117 LOT 3: PIPE: 60 x 6500mm. 66 x 4000mm. 113 x 3000mm. 76 x 2400mm. 78 x 2400mm. 190 x 1500mm. 95 x 1000mm. PLANKS: 320 x 3000 laminated. 1 x pallet mixed short planks. 1 x pallet mixed short kick boards. LADDERS: 1 x 2900mm. 1 x 3000mm. 7 x 3600mm. 5 x 4200mm. 10 x 5400mm. OTHER: 1 x drum of doubles. 1 x drum of singles. 1 x drum of joiners.
Quantity scaffolding
inglewood
TENDER REF 16118 LOT 4: PIPES: 73 x 6500mm. 121 x 3400mm to 3600mm. 80 x 3000mm. 90 x 2400mm. 81 x 2400mm. 90 x 1900mm. 290 x 1500mm. PLANKS: 308 x 3000mm laminated. 1 x pallet mixed shorts. 1 x pallet mixed kick boards. LADDERS: 4 x 3000mm. 5 x 3600mm. 4 x 4200mm. 10 x 5400mm. 1 x 6000mm. OTHER: 1 x drum of doubles. 1 x drum singles.
3
Quantity scaffolding
inglewood
TENDER REF 16119 LOT 5: PIPE: 75 x 6500mm. 50 x 3200mm. 108 x 3000mm. 90 x 2400mm. 90 x 2400mm. 79 x 2000mm. 200 x 1500mm. PLANKS: 312 x 3000mm laminated. 1 x pallet short planks (1500mm). 1 x stack of assorted kick boards (2000mm 3000mm). LADDERS: 3 x 3000mm. 4 x 3600mm. 4 x 4200mm. 9 x 5400mm. 1 x 6000mm. OTHER: 1 x drum of doubles. 1 x drum of singles. 1/3rd drum of joiners.
Quantity scaffolding
TENDER REF 16120 LOT 6: PIPE: 73 x 6500mm. 78 x 3000mm. 87 x 3000mm. 90 x 2400mm to 2500mm. 88 x 2400mm. 95 x 2000mm. 190 x 1500mm. 110 x 1000mm. PLANKS: 292 x 3000mm laminted. 1 x stack of 2000mm. 2 x stacks of assorted kick boards. LADDERS: 4 x 3000mm. 4 x 3600mm. 4 x 4200mm. 9 x 5400mm. 2 x 6000mm. OTHER: 2 drums of doubles (approx 600).
4
inglewood
Quantity scaffolding
inglewood
TENDER REF 16125 LOT 7: PIPE: 70 x 6500mm. 112 x 3000mm. 123 x 2400mm. 90 x 2400mm. 86 x 1600mm. 90 x 1800mm. 18 x 1500mm. 150 x 1000mm. PLANKS: 318 x 3000mm laminated. 1 x stack of short planks. 1 x stack of kick boards (approx 3000mm). LADDERS: 4 x 3000mm. 4 x 3600mm. 4 x 4200mm. 8 x 5400mm. 1 x 6000mm. OTHER: 2 x drums of doubles. 1 x pallet bin of pipe stubs 300mm to 500mm.
Quantity scaffolding
inglewood
TENDER REF 16127 LOT 8: PIPE: 78 x 6500mm. 134 x 2700mm to 3000mm. 90 x 2400mm. 90 x 2400mm. 90 x 2000mm. 102 x 1500mm. 165 x 1500mm. 150 x 1000mm. PLANKS: 320 x 3000mm laminated. 1 x stack (approx 36) of 2000mm planks. 1 x pallet (approx 80) of 1000mm planks. 1 x pallet of short kick boards. LADDERS: 3 x 3000mm. 5 x 3600mm. 4 x 4200mm. 8 x 5400mm. 2 x 6000mm. OTHER: Approx 900 doubles. Approx 380 singles.
5
Quantity scaffolding
inglewood
TENDER REF 16128 LOT 9: PIPE: 61 x 6500mm. 91 x 3000mm. 90 x 3000mm. 115 x 2400mm. 89 x 2400mm. 88 x 2000mm. 180 x 1500mm. 220 x 1000mm. 1 x pallet bin of short stubs (300mm to 500mm). PLANKS: 300 x 3000mm laminated. Approx 52 x 1000mm. Approx 44 x assorted. LADDERS: 3 x 3000mm. 4 x 3600mm. 4 x 4200mm. 8 x 5400mm. OTHER: 2 x drums of doubles. 1 x drum of singles.
Quantity scaffolding
TENDER REF 16129 LOT 10: PIPE: 63 x 6500mm. 98 x 4500mm. 90 x 3000mm. 130 x 2400mm. 84 x 2400mm. 100 x 2000mm. 204 x 1500mm. 90 x 1000mm. PLANKS: 320 x 3000mm laminated. 1 x stack of assorted planks. 1 x pallet of assorted kick boards. LADDERS: 4 x 3000mm. 4 x 3600mm. 4 x 4200mm. 8 x 5400mm. OTHER: 2 x drums doubles. 1 x drum of singles.
6
inglewood
Quantity scaffolding
inglewood
TENDER REF 16136 LOT 11: PIPE: 75 x 6500mm. 82 x 5000mm. 93 x 3000mm. 94 x 2400mm. 90 x 2400mm. 88 x 1800mm. 88 x 1600mm. 81 x 1500mm. PLANKS: 310 x 3000mm laminated. 52 x 1500mm. 1 x stack of assorted planks. 1 x stack of assorted kick boards. LADDERS: 3 x 3000mm. 5 x 3600mm. 4 x 4200mm. 8 x 5400mm. OTHER: 2 x drums of doubles. 1 x drum of singles.
acroW 4 X bundles construction braces
inglewood TENDER REF 16114 LOT 12: Four bundles of construction braces in good condition. Threads clean and oiled. Total number 72.
7
pallet 200mm kick boards
inglewood TENDER REF 16121 LOT 13: Large quantity of good condition kick boards. Mostly 4000 to 5000mm long with some halfs and shorts. Boards are 200mm x 25mm rough sawn H3 treated. Pallet load is three boards wide x 900mm high.
pallet Jacking feet
inglewood TENDER REF 16123 LOT 14: 18 x jacking feet in working condition. Plain steel feet. Threads all clean and oiled.
sundry aluminium stairs
inglewood TENDER REF 16130 LOT 15: Built by Easy Access Co. Four complete units with hooks top and bottom. Nine steps. 565mm wide. Suitable for a verticle gain of 2000mm. Good tidy condition with no notable damage.
8
6 X scaffold trusses
inglewood TENDER REF 16131 LOT 16: Six lattice style trusses built from scaffold tube. Two are 3500mm long x 490mm high. Four are 6500mm long x 495mm high.
Quantity scaffolding
inglewood TENDER REF 16132 LOT 17: 12 x H frames. 63 x 3000mm laminated planks. Pallet of 1/2 & 3/4 length planks. 19 x cross braces.
Quantity scaffolding
inglewood TENDER REF 16133 LOT 18: At least 60 x 3000mm laminated planks. Approx 30 x half planks. 1 x pallet short planks (half or less). PIPES: 90 x 1900mm. 2 x pallets of various lengths from 1500mm to 3200mm. 1 x pallet bin of shorts 500mm to 700mm.
9
1975 lees do3 forklift
inglewood
HR MTR 2132 ENG Neptune 4 Cylinder Petrol. SERIAL TENDER REF
D030394 16134
LOT 19: TYRES: Front - 6.50 x 10 Bridgestone Pneumatic. Good Virgin tyres with 50% remaining tread both sides. Rear - 5.00 x 8 Bridgestone Pneumatic. There are a couple of minor cuts on the side walls but basically sound. 10% remaining tread both sides. OPERATORS AREA: Tidy. There is a 150mm long rip in the seat backrest - otherwise ok. Plain painted dash panel is presentable with a single gauge and warning lights all intact. Controls and steering wheel tidy. EXTERIOR PANELS: The bodywork around the forklift is mainly tidy with no notable rust to report. There are a few shallow dents in the lower RH side panel but no other damage. The paintwork has seen better days with numerous scrapes and scratches and some areas of surface rust becoming established. FUNCTIONAL EQUIPMENT: Two stage mast measures 2550mm high (lowered) with 900mm long x 130mm wide forks. The mast sections and chains are well greased with no excessive wear notable. There is 5mm of play in the tilt ram rear eyelets and moderate wear in the tilt ram forward eyelets. With the mast fully raised the forks are 4000mm from the ground. A manufacturers label shows the capacity to be 3000lbs at 24inch load centre. 1360kg at 609mm load centre. MECHANICAL: The engine is work dirty with a fair bit of oil dampness around the head which looks to be coming from the rocker cover gasket. Takes a good amount of winding to cold start and coughs and splutters for a while. Once warm the engine seemed to run ok with a clean exhaust emission. Forward, reverse, steering and lift functions all operating as expected. There is an exhaust leak somewhere around the muffler which is located beside the RH rear wheel. Also a minor hydraulic oil leak at the control bank below the RH side of the dash. The forks back-board has aslight kink at the top LH corner. GENERAL: This is a well used older forklift that is starting to show its age. Runs a bit rough but still looks capable of earning its keep in some applications. There is a basic pipe frame with a slat roof to protect the operator from falling objects.
20 foot shipping container
inglewood TENDER REF 16135 LOT 20: One standard 20 foot ISO shipping container in tidy condition. There are a few minor dents along the lower sides in places but no rust or major damage to report. Reasonably clean and well painted inside and out. Nice and dry inside. Very good condition galvanised door latches. Doors open, close and seal well. A few minor dents on the rear wall.
10
Warren Bloxham - Sales Manager has spent his 30 years career working with trucks and machinery. Having completed an apprenticeship as a fitter and welder, Warren started his own business in transport engineering at the age of 20. A truck sales department evolved and this grew to be one of New Zealand’s largest sellers of used trucks ‘Transport Marketing Ltd’. In early 1990’s Warren and his partner Sue Jones founded Commercial Tenders which was purchased by ManheimFowles in 2007.
11
InspectIons
Inspection Arrangements By appointment only – please do not arrive on site without an appointment. If you wish to inspect any of the items within this catalogue we have a retired couple nearby holding the key to the premises where the scaffolding is stored. Please phone prior to make an appointment if you wish to view the scaffolding. John Peterson can be contacted on his home Phone 06 756 7643 - evenings are the best time, however not after 8.30pm please, or Joy Peterson has a mobile 027 353 1842
QuantIty accuracy The stocktake of the scaffolding was counted and measured on a conservative basis. Please allow a margin for error of plus / minus 2%
terMs & conDItIons
Please Note •
Tenders Close 4.00pm Tuesday 30 November 2010
•
Highest or any tender not necessarily accepted
•
There are no maintenance records
•
All units are offered strictly “as is where is”
•
Payment terms are within 5 working days of notification of tender acceptance
•
Tenders will be accepted by post or fax
•
Successful buyers are required to uplift all items purchased within 10 days of notification of tender acceptance. Unless prior special arrangements are granted the Vendor reserves the right to dispose of any equipment remaining on their premises after such period in any way they see fit
Buyers aDMIn Fee
Buyer’s Administration Fee A Buyer’s Administration Fee of 5% plus GST is added to the Tender Price of all goods sold in this Tender. The Buyer’s Administration Fee contributes to the overall cost of setting up, marketing and administering the tender.
GST This Tender is GST exclusive. Therefore 15% GST will be added to: i) The Tender Price ii) And the Buyer’s Administration Fee (as detailed above)
Phone Fax Website
0800 500 166 09 269 0489 www.commercialtenders.co.nz
We have endeavoured to provide an objective report on these units, however, please BE AWARE that we cannot always guarantee the information to be totally correct and accurate. Therefore we will not accept any liability whatsoever for any cost or consequence incurred by any person relying on information within this catalogue that is found to be incorrect. We recommend inspection prior to purchase. 12
(further photos available online)
TRUCK & MACHINERY NZ