Scissor lift How To Operate A Scissor Lift
Learning how to operate a scissor lift is not difficult. A scissor lift is a portable, hydraulic-powered lift with a platform that can be raised into the air directly above the base. It is very important that you learn and understand all of the controls and safety steps before you begin operating a scissor lift.
What is a Scissor Lift? Wikipedia defines a scissor lift as a type of platform that can usually only move vertically. The mechanism to achieve this is the use of linked, folding supports in a criss-cross “X” pattern, known as a pantograph (or scissor mechanism). The upward motion of a scissor lift is achieved by the application of pressure to the outside of the lowest set of supports, elongating the crossing pattern, and propelling the work platform vertically. The platform of a scissor lift may also have an extending “bridge” to allow closer access to the work area, because of the inherent limits of vertical-only movement.
How To Operate A Scissor Lift START AND OPERATION Pull out the emergency stop button on the control panel. Select “platform” with off/platform/base select key switch. Enter the platform. Pull out the emergency stop button on the platform control panel. Proceed with job using the required buttons, levers and controller located on the operator console. SHUTDOWN PROCEDURE Fully lower the platform. Push the emergency stop buttons. Turn the base key switch to the off position. If you are finished with the Scissor Lift, clear all tools, debris, etc., from the platform and plug the Scissor Lift in to recharge the battery.