End mill sharpener

Best End Mill Sharpener from Cutter Master and its Uses: Before going in for an End Mill Sharpener, it is pertinent know the difference between a Drill Bit and a Milling Bit. A drill bit can cut in the axial direction only.

But, a milling bit generally cuts in all directions. An end mill is a tool used in industrial milling applications such as tracer milling, profile milling, plunging and face milling.

The end mill gets dull with constant use and needs to be sharpened frequently.

Thus, it leads to down time and the consequent interruption in production.

Therefore, you need to use the best quality of End Mill Sharpener.

The 2017 Journeyman End Mill Sharpener from Cutter Master gives the best performance because of its silent DC drive and the following functionalities. ● Primary and Secondary Grinding of the flutes and ends for diameter between 1/8” to 2” ● Primary and secondary Grinding the corner residues; bull nose and ball nose ● Reducing the neck diameter of your tools ● Cutting off your tools ● End gashing your tools ● Grinding the Weldon flats in your tools ● Grinding of set screw flat on carbide end mill shank ● Grinding of annular cutters

● ● ● ●

Cylinder grinding of small rounds Grinding of step drills, countersinks, finishers, reamers and hoggers Eliminates burning of tools for heavy cuts More down tilts and swiveling on the base, thus allowing faster alignment and setting for grinding of side and face cutters, annular cutters and countersinks. ● The DC drive is 600 watts, having variable speed and is reversible.

Cutter master has sold about twenty thousand units worldwide

End Mill Sharpener: It sharpens long-fluted end mills of diameters between 1” to 6” in diameter. The E-90 End Mill Sharpener easily and quickly sharpens the end mill. You can have a better control over the air-bearing spindle and can rotate and pull the spindle to the full length of the end mill. It generates less heat and allows maximum machining rates. It reduces the finishing process because of fewer burrs created.

It can also reduce your inventory of tool crib and thus saves money for you.

Contact Us: 2353 Ridgecrest Place, Ottawa Ontario, Canada Phone 800 417 2171 | Cell 613 523 7753 | Fax 613 523 8265 Website: www.cutermasters.com