The new self cleaning fin design allows for small amounts of material to pass through the fins which drastically reduces build up. Elevated surge fins allow water to flush underneath to reach the main fin row during clean up.
is lighter and stronger than hollow designs, providing 350% more contact surface area and eliminates flexing and cracking.
allows for a smooth discharge with virtually no surging, while allowing maximum discharge performance.
It’s What’s on the
Con-Tech’s patent pending EcoFin technology allows concrete to flow through the mixing fins then folded into the mix coming over the top of the fin. This provides a much more homogenized mix in a much more efficient manner than conventional designs.
Mixing holes allow concrete to pass through the fin along the drum skin providing a barrier from the mixing chamber. Reducing the wear on your mixing fins and drum skin.
HIGH CAPACITY
head and belly sections allow for 25% more material in the mixing bowl.
MORE WEAR RESISTANT
More wear resistant than typical Gr. 50 spun heads.
MORE USABLE STEEL
1/4” and 5/16” heads are true nominal thickness unlike spun heads that get thin on the forward radius.
1/4” heads are 172 lbs. lighter than 1/4” spun heads.
BALL BUSTER
paddle system is strategically located for breaking apart floating dry balls.
Con-Tech’s patent pending A.R. steel ‘lip doubler’ provides ultimate wear protection.
The Con-Tech® High Performance™ Drum is designed from head to tail cone with the producer in mind. With the manufacturing process, and materials used, we worked with the industry to develop this drum which sets the standard.
Tail Cone Fin Hole Configuration with Elevated Surge Fins: Limits buildup, improves mixing, and reduces wear on your equipment
Manufactured in the USA: All HP drums are built with pride in Dodge Center, Minnesota
Patented A.R. Steel Lip Doubler: Doubles fin thickness for ultimate wear protection and fin life
EcoFin® Technology: Reduces wear, buildup, and improves mix consistency
Precision Fit Panels: Eliminates flats spots that cause accelerated wear areas — Ensures optimal fin position for even, smooth pours
DODGE CENTER
MINNESOTA (MIDWEST/CANADA) 65740 State Hwy. 56 Dodge Center, MN 55927 dcsales@ctmmixers.com
507-374-2239
High Performance Tail Cone: Special fin spiral with an additional 1/4 turn allows for unmatched charging speed and discharge performance
Fabricated A.R. Steel Head: 1/4” true nominal thickness reduces wear areas throughout
Straight Taper Cone: Straight angle from the belly to the drip ring eliminates surging caused by non-straight cones in a high-production pour
One-Piece Solid Roller Track: Premachined and crowned — eliminates weld cracking and increases structural integrity over hollow designs
High Capacity Mixing Bowl: 25% increase in mixing area with a lower center of gravity for improved stability
Ball Buster Paddle System: Drastically reduces or eliminates cement balls
5/16 Hatch Frame with Tapped Holes: Increases frame thickness by 85% and eliminates square-welded nuts
Removable Lifting Lug: For easy and safe drum removal and replacement — a removable lifting lug is included with each HP drum
CLEVELAND
OHIO (NORTHEAST) 38134 Western Pkwy., Unit 2 Willoughby, OH 44094 northeast@ctmmixers.com 440-946-3322
GEORGIA (SOUTHEAST) 108 Hudson Industrial Dr. Griffin, GA 30224 southeast@ctmmixers.com 770-229-1773
HOUSTON
TEXAS (SOUTH CENTRAL) 11175 Windfern Rd. Houston, TX 77064 houston@ctmmixers.com 832-688-8449
SAN
CALIFORNIA (WESTERN) 378 E. Commercial Rd. San Bernardino, CA 92408 west@ctmmixers.com 909-478-0017
