INSTALLATION 5. Connect the pilot arc lead (yellow). Insert the connector into the torch receptacle and turn it by hand until it is tight.
6. Connect the optional ohmic contact wire. 6a. Route the ohmic contact wire through the opening in the braided cover and the torch sleeve.
Sleeve
Braided cover
6b. Insert the connector into the torch receptacle and turn it by hand until it is tight.
Ohmic contact wire part numbers (Not part of the HPR260XD system. Shown for reference only) Part no. 123983 123984 123985 123986 123987 123988 123989 123990 123991
3-32
Length 3 m (10 ft) 6 m (20 ft) 7.5 m (25 ft) 9 m (30 ft) 12 m (40 ft) 15 m (50 ft) 23 m (75 ft) 30 m (100 ft) 45 m (150 ft)
HPR260XD Auto Gas Instruction Manual