Flare Gas Recovery Traditionally, in the Oil & Gas industry, waste and surplus gas has been disposed of by flaring to atmosphere. Today this process is becoming increasingly unacceptable as the industry progresses towards eliminating the emission of greenhouse gases into the atmosphere, whilst simultaneously conserving energy. Our Flare Gas Recovery Units are installed in numerous refineries, oil fields and gas fields worldwide. They can handle flows ranging from 200 to 6.000 m3/h (850 to 26.500 gpm), 1.2 to 30 bar (18 to 450 psi) for sliding vane based Flare Gas Recovery Units, and from 1.200 to 15.000 m3/h (5.200 to 66.000 gpm), 1.2 to 4.7 bar (18 to 70 psi) for liquid ring based Flare Gas Recovery Units Flare Gas Recovery is the process of recovering the waste gases that would normally be flared, so they can be used as fuel gas elsewhere in the facility. This results in reduced emissions and cost savings.
Crystaltcs facility’s safety depends on properly integrating the Flare Gas Recovery System into the relief header and the flare system.Each gas contaminant and each gas product influence the optimal lineup of treatment steps, and expertise is required to quickly evaluate these. An internal study focusing on Iran has shown that approximately 50-70% of the currently flared gas resources in Iran can actually be made into valuable products with a payback period. Application: