ARK Bath
Fittings
High quality designer bathroom taps
In structures, many sanitary fittings are utilised to efficiently collect and remove waste water to the house drain: They are classed as follows:
Ablution fittings
1) Wash basins
2) Sinks
3) Bath tubs
4) Flushing cisterns
Soil fittings
1) Urinals
2) Water closets
Bathroom Tap
Wash basins
Usually, a wash basin is composed of fire clay, stoneware, earthenware, or vitreous India. They are now made of steel, plastic, glass, aluminium, and other materials.
There are two types of wash basins - the flat back and the angle back.
● Flat back -mounting on walls
● Angle back- fixing at the junction of two walls
Sinks
1. A sink is a rectangular basin used in kitchen or laboratory for cleaning utensils and glasswares.
2. Made of glazed earthenware, stoneware, stainless steel etc.
3. Provided with draining board on the right of user.
4. The height of top of sink from floor - 90cm
Bath Tubs
Bath tubs are usually made of enamelled iron, cast iron, plastic, steel, marble, fireclay, fiberglass etc.
They may be with parallel sides or with tapering sides. The usual dimensions of both tub are:
1. length : 17 to 1.85m
2. width : 070 to 0.75m
3. depth :0.6m
Flushing Cisterns
Appliance used for flushing out water closets , urinals etc.
Based upon the height at which it is fixed
➢ High level cistern — Min ht .of 125cm b/w top of pan and underside of cistern
➢ Low level cistern - Max ht .of 30cm b/w top of pan and underside of cistern
Two types
● Valve less siphonic type eg: Bell type flushing cistern
● Valve fitted siphonic type
ARK Bath Fittings
Address: 72 Industrial Area, Phase-1, Panchkula 134113, (Haryana) India
Email: info@crystalfaucets.com
Mobile: +91-9888466189
Website: www.arkbathfittings.com