Monthly DIY Magazine for Kids Aged 8 plus (June 2019)

Let your fairies & wheelies be green from today!

8+ Kids Plus Kit

What’s your plan to beat the

Air Pollution?

#BeatAirPollution

Your Special Gift Inside

June

2019

Kids DIY Magazine CreativKits’ World Environment Day Special is hosted by

Instein, the Artsy, Gadgeteer, Maker and Scientist

Table of Contents 1. Build your own Fridge Robot Introduction Things you will need Instructions

04 04/05 06 07

2. Make your Pop-up Origami Art 08 Introduction 08/09 Things you will need 10 Instructions 11 3. Make your own Bouncy Balls Introduction Things you will need Instructions

12 12/13 14 15

4. Make your own Wax Candles Introduction Things you will need Instructions Inspirations

16 16/17 18 19/20 21

2 of 24

ien tis t

22

Sc

tee r Ga dge

Per for m

Ma ker

Ar tsy

er

VIDEOS WORTH WATCHING

an Science, and Plus Kits

Pg4

Eve Env ry d iron ay men is tD ay!

Build your own Fridge Robot

Art Craft, and Plus Kits

Pg8

Make Pop-up Origami Art

Art Craft, Combo & Plus Kits

Science, Combo & Plus Kits

Pg12

Make your own Bouncy Balls

Pg16

Make your own Wax Candles

3 of 24

4 of 24

Build your own Fridge Robot

Never look at your Fridge the same way ever again!

Build a Fridge Climber !

Discover future with these amazing real-life Robots Scan & Read

Follow the Steps on the Back Cover Page Follow the Steps on the Back Cover Page

5 of 24

Build your own Fridge Robot What’s in the Fridge Magnet Kit?

WARNING: FOR AGES OVER 5. NOT FOR CHILDREN UNDER 3 YEARS DUE TO SMALL PARTS. ADULT GUIDANCE IS RECOMMENDED. READ THE INSTRUCTIONS BEFORE USE. FOLLOW THEM AND KEEP THEM AS REFERENCE. TO PREVENT POSSIBLE SHORT CIRCUIT, NEVER TOUCH THE CONTACTS INSIDE THE BATTERY CASE WITH ANY METAL OBJECTS. ONLY INSTALL BATTERIES AFTER YOUR HAVE ASSEMBLED THE PRODUCT.

6 of 24

Instructions •

O

nce you have gathered all material, follow the steps in the printed instructions booklet/ leaflet. Make sure your mum or dad is watching over while you do this so that you can reach out to them when you need.

Your Instructions (included) Your Fridge Climbing Robot

Follow the Steps on the Back Cover Page

Watch this Awesome Video on how to make a Fridge Robot. https://youtu.be/to6XGf9PUtI

7 of 24

8 of 24

Make your Pop-up Origami Art

See your Toucan come to life!

Scan & Watch Video

Scan and Read about Origami

9 of 24

Follow the Steps on the Back Cover Page

Make your Pop-up Origami Art What do you need to make a pop-up Origami?

WARNING: NOT SUITABLE FOR CHILDREN UNDER 3 YEARS OF AGE. KEEP RUBBER-BANDS AWAY FROM CHILDREN AND AVOID HURTING YOURSELF OR OTHERS.

10 of 24

Instructions •

O

nce you have gathered all material, follow the steps in the printed instructions booklet/ leaflet. Make sure your mum or dad is watching over while you do this so that you can reach out to them when you need.

Feeling a bit more adventurous? Make your own Penguin Paper Bomb.

Follow the Steps on the Back Cover Page

Watch this Instruction Video on how to make Penguin Paper Bomb. https://youtu.be/tTBH-pggvH0

11 of 24

Follow the Steps on the Back Cover Page

Scan & Watch the Science of Bouncy Ball

12 of 24

Make your own Bouncy Balls

If playing with me could be so fun, making me and then playing with me would be double fun!

13 of 24

Make your own Bouncy Balls What’s in the Bouncy Ball Kit?

Moulds

Rubber Sand

WARNING: NOT SUITABLE FOR CHILDREN UNDER 3YRS. ADULT SUPERVISION IS MANDATORY ALL THE TIME. DO NOT EAT RUBBER SAND AND ENSURE IT DOESN’T GET IN YOUR EYES. IF THAT HAPPENS BY ACCIDENT, WASH WITH WATER THOROUGHLY.

14 of 24

Instructions •

Follow the Steps on the Back Cover Page

Watch a video tutorial of this project at following location:

https://youtu.be/WS1YhD06krU

O

nce you have gathered all material, follow the steps in the printed instructions booklet/ leaflet. Make sure your mum or dad is watching over while you do this so that you can reach out to them when you need.

Step 3: Making the ball

Step 1: Set up the work area

Prepare an area to do the project. Best place is a table or a flat bench. Make sure to cover the area with a plastic table cover. Place all the items from the kit on the area for easy access.

Once the mould is filled up to the top, put the cap back on, so as to seal it properly. Now submerge the mould in a glass full of water.

Wait for at least 1 minute and take it out.

Place the wet mould on a tissue paper to wipe off dripping water.

Step 2: Getting Ready

Step 5: Bounce the magic

Take a plastic cup or glass and fill it threefourth with water. Place it near your work area.

Open top of the mould provided in the kit and start filling it with different colour sand in small proportions. Make sure you tap the mould in between adding colours. It helps in settling the colours and fill in the empty spaces in the ball properly.

Step 4: Submerging the ball

Wait for 5-10 minutes before opening the moulds. Gently open-up the moulds and take the ball out. Here you go bouncing them around!

15 of 24

Make your own Layered Wax Candles

What else can you do with your Crayons?

* Adult’s Guidance is mandatory for all experiments 16 of 24

Introduction • Fun Facts •

14 Cool things to make with Crayons 17 of 24

Follow the Steps on the Back Cover Page

Make your own Layered Wax Candles What do you need to make Layered Candle?

Crayons

Wax

Candle Wicks

Stickums

Short Glasses

WARNING: CHOKING HAZARD: NOT SUITABLE FOR CHILDREN UNDER 3YRS. ADULT SUPERVISION IS MANDATORY ALL THE TIME. CONTAINS HOT WAX WHICH MAY CAUSE SERIOUS BURNS AND INJURY. KEEP AWAY FROM BODY PARTS AND CLOTHS.

18 of 24

Instructions •

Follow the Steps on the Back Cover Page

Watch a video tutorial of this project at following location:

Https://youtu.be/M-b3bpXIB1s

O

nce you have gathered all the material you need, follow these steps. Be creative and try doing things in your own way. Most importantly, make sure your mum or dad is watching over while you do this so that you can reach out to them when you need help.

Âť Hot Wax! Adults assistance and supervision recommended.

Step 1: Prepare the Candle Wick Take the candle wick and attach the stickums to the base of the wick. Now place the candle wick in the centre of the short glass. Make sure the wick is standing up in the middle.

19 of 24

Make your own Layered Wax Candles Step 2: Attaching the Candle Wick Break the wax cubes in smaller pieces and pour one scoop of wax into a paper cup.

Microwave the cup for two minutes (or until the wax melts in the cup). Take the cup out of the microwave and stir with the popsicle stick (item 5). Pour a thin layer of the melted wax into the bottom of the short glass. Let it harden.

Step 3: Colour your Wax Take the paper lining off the crayons and break them into small pieces. Add same colour crayon pieces into one cup and add 1-2 scoops of wax to the cup. Heat-up the crayons and wax in a Microwave for 2 minutes. Take it out and stir to make sure all wax pieces have melted. Add the melted coloured wax to the short glass and wait for the wax to harden.

Step 4: Adjust the Wick Once you have filled 3 quarters of the glass, do not pour any more wax. Cut the extra wick off. Enjoy your very own coloured candle! Make it a show-piece or gift it to family or friends.

Note: Optionally, you can colour the wax using different colour crayons and layer it up to make a multi-coloured candle. Make sure the layer below cools down before pouring the next layer.

20 of 24

Inspirations •

Stacked Layer Candle

Step Ladder Candle

21 of 24

Videos Worth Watching...

Scan and Ring

Follow the Steps on the Back Cover Page

Reduce, Reuse, Recycle Song For Kids | The 3 R’s of Recycling https://youtu.be/qtyBzFV9yTs Catchy Earth Song you’d love to hear and dance with. Great message too!

Scan and Ring

Follow the Steps on the Back Cover Page

Kids against plastic | Amy & Ella Meek | TEDxExeter https://youtu.be/XWxtlqHjxvo Can we count on adults alone to save the planet? Amy and Ella, young founders of Kids Against Plastic, don’t think so.

22 of 24

Credits & References “Real-life amazing robots” is sourced from www.pocket-lint.com “KidzRobotix FRIDGE ROBOT” was published by 4M - STEAM TOY on YouTube “History of Origami” is sourced from www.study.com “Penguin Paper Bomb” was published by Jennifer Maker on YouTube “The Science of Bouncing” was published by for MITK12Videos on YouTube “Make Your Rainbow Bouncy Ball!” was published by AWESMR Kids on YouTube “14 things to make with crayons” is sourced from www.momsandcrafters.com “DIY Crayon Candles” was published by PrincesSprinklez on YouTube “The 3R’s of Recycling” published by Math Songs by NUMBERROCK on YouTube “Kids Against Plastic” was published by TEDx Talks on YouTube

Pg 05 Pg 07 Pg 09 Pg 11 Pg 12 Pg 15 Pg 17 Pg 19 Pg 22 Pg 22

Scanning QR code from a Smart Phone or Tablet:

Step 1: Open up the camera app on your Smartphone and hold it up to the QR code (like the one on the right) Step 2: Your device will automatically recognize the QR code and provide you with an on-screen notification.

Step 3: Tap the notification to be taken to the destination of the QR code.

23 of 24

Just use your Smart phone camera!

#BeatAirPollution

Save the Earth Plant a Tree.

CreativKits © 2017-19. All Rights Reserved.