West #8, 2011

Published Nationally

$3.00

®

Western Edition

April 9 2011 Vol. VII • No. 8

“The Nation’s Best Read Construction Newspaper… Founded 1957.”

470 Maryland Drive • Ft. Washington, PA 19034 • 215/885-2900 • Toll Free 800-523-2200 • Fax 215/885-2910 • www.constructionequipmentguide.com

Inside

Sunny Side Gateway Project Comes to End...15

JLG Graduates 6000th Qualified Instructor...36

ConExpo-Con/AGG, IFPE 2011 Attracts Hundreds of Thousands to Las Vegas T

tered attendees; the shows were the global industry gathering place for the year and the largest gathering in North America since 2008 for the construction, construction materials and fluid power/power transmission/motion control industries. The shows were held at the Las Vegas Convention Center.

Attendees said they were at the shows to examine the newest equipment and product technologies and innovations to help them prepare for

California Section 15-19

he mood was overwhelmingly positive at the ConExpoCon/AGG and IFPE 2011 expositions held March 22-26 in Las Vegas.

Despite continued uncertainty in U.S. construction markets and the overall economy, industry professionals expressed hopeful optimism for a sustained U.S. upturn in the coming months, while global sales continue to be strong.

ConExpo-Con/AGG and IFPE 2011 attracted nearly 120,000 regis-

Paving, Compaction & Milling Section ......35-46

Former FMC Factory Makes Room for Stadium

Kir by-Smith Holds Pair of Paving Seminars...36

Table of Contents ........4

Auction Section ....50-59 Business Calendar ......56 Advertisers Index ......58

By Erik Pisor CEG CORRESPONDENT

It seems only fitting that the first stage in constructing a new $60 million stadium for the San Jose Earthquakes — a Major League Soccer franchise — would involve the destruction of an existing facility.

As of early March, Devcon Construction began an estimated $3 million project in Santa Clara, Calif., that involves the complete demolition of a 450,000- sq. ft. (41,806 sq m) factory that previously housed FMC — a company that assembled military vehicles including the Bradley Fighting Vehicle.

Located on a 14.5 acre site, the roughly 60-

see CONEXPO page 10

year-old, abandoned assembly plant will be completely torn down by early June.

Because the plant has been vacant for some time, Devcon did not have to remove large HVAC cooling units, generators or assembly equipment prior to actual demolition — making this tear down project a straight forward see STADIUM page 13

Page 2 • April 9, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Lafayette (Corporate) 3135 US Hwy 90 East • Broussard, Louisiana 70518 (337) 837-6693 • Fax (337) 837-3146 Houston 13727 I-10 East • Baytown, Texas 77520 (281) 385-6633 • Fax (281) 385-7106 Lake Charles 4851 East Napoleon Road • Sulpher, Louisiana 70663 (337) 625-5942 • Fax (337) 625-5602

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 9, 2011 • Page 3

"In Business for over 29 Years" www.hendrixmachineryllc.com 2005 John Deere 550J LT, Stk# 7060, OROPS, 6 way blade, 462 hrs., 80% U/C, 8'6" Wide$36,500

1-936-327-5430 • Email: sales@hendrixmachineryllc.com

Se Habla '2003 John Deere 450H, Stk# HR10, OROPS, Español Eng. Encl., 6 way blade, 50% U/C, 2,598 hrs ..... ..............................................................$24,500

2008 Case 580S M III, Stk# 7035, OROPS, 4WD, 1,256 Hrs., 50% Tires, Extendahoe, 18” Bucket...... ......................................................................$46,500

2005 Boxer Compact Track, Stk# 7186, 605 Hrs., 44” Bucket, 9” Rubber Tracks, Aux. Hyd, Perkins Diesel Eng. ...............................$14,500

Ford 4000, Stk# 7044, 8370 Hrs, 2WD, 80% Tires, 55 HP ............................................$6,000

2004 Hyster S120XMS, Stk# 7017, 12,000 lbs., 13' 6" ft., 1,586 hrs., 3 Stage Mast, 360 Hyd. Grapple, Pnuematic Tires, Propane .......$12,500

Ranch House Camp, Stk# 6361, New 8x24 Portable Camp House, 4 Bunk Beds, Restroom w/Shower, Sink, Camper Plug in for Electricity or Generator Outlet................................$11,500 2005 Ditch Witch RT40, Stk# 6726, 968 Hrs..... with Trailer ............................................$17,500 ...............................................................$12,500

1983 Cat 623B Water Wagon, Stk# 7101, OROPS, BR8000T Tank, 29x39 Tires, Cat Diesel Eng ........................................................$29,500

2003 John Deere 670CH, Stk# 7212, EROPS, 4,270 Hrs., 12 ft Blade ..........................$89,500

1998 Snorkel TB42, Stk# 7155, 33’, 4WD, 4164 2004 Bobcat 325D, Stk# 7034, OROPS, 1590 Hrs, 42HP, Wt. 11,602 Lbs, Deutz Eng....$9,500 Hrs, 24” Bkt ..........................................$14,500

2005 Boxer TL225 Track, Stk# 7185, OROPS, 12 1983 Hyster S80XLBCS, Stk# 7129, 8000 Lbs, 12’, 812 Hrs, No Forks, Hard Rubber Tires, Hrs., 44” Bucket, 9” Rubber Tracks, Aux. Hyd., Honda 24.0 V-Twin Eng.........................$16,500 Propane Fuel ...........................................$3,850

2007 KDE 5700T, Stk# 5827, 120 240 Volt Single Phase ...........................................$1,000

2008 John Deere 310J, Stk# 7180, OROPS, 2005 Case 570M XT, Stk# 7179, OROPS, 2WD, 4WD, 998 hrs., 50% Tires, 24" Bucket, 2 Stick 1433 Hrs, 60% Tires, GP Bkt w/Hyd. Box Blade.

Control, No Aux.....................................$46,500 ..............................................................$18,500

2004 Bobcat 430G, Stk# 6486, OROPS, 2512 Hrs, Push Blade, 22” Bkt, Rubber Tracks ........... ..............................................................$18,500

1982 Case/Drott 3330B, Stk# 6400, OROPS, 7.5 Ton Carry Deck, 4694 Hrs, Case Eng ....$12,500

2001 Cat D6R XL, Stk# 7159, EROPS, A/C, Rear 2005 John Deere 310G, Stk# 7174, OROPS, 2003 JLG G6-42A, Stk# 6476, 6000 Lbs, 42’, 2005 John Deere 650J LPG, Stk# 7218, OROPS, Screen, St/Tilt Blade, 70% U/C, 16,853 Hrs., 4WD, 602 Hrs, 80% Tires, 12” Bkt, Quick Sweeps, 6 Way Blade, 50% U/C, 3,322 Hrs., 24” Carco 70 Winch, 30” Pads, 11’8” ft. Blade......... 3143 Hrs, 4WD, 4WS, 10% Foam Filled Tires, Connect, 2 Stick Control, Aux. Hyd .......$32,500 Pads, 10’1” Blade..................................$42,500 ..............................................................$89,500 Hyd. Self Leveling System, JD Eng. ......$21,500

2003 Cat CP433E, Stk# 6744, 66" Pad Drum, 1,163 hrs, 80% Tires ............................$34,500

1994 Fiat Allis FR180, Stk# 6658, EROPS, Allmand LT103 Light Tower, Stk# 7149, 9,101 8,132 hrs., 40% Tires, 6 ft. Forks, Needs Eng. hrs., Kubota Eng., 3 Cyl ..........................$3,500 Repaired ................................................$15,500

1994 John Deere 770BH, Stk# 7200, EROPS, A/C, 8,510 Hrs.,14 ft M/B w/Slide & Tip Control, 3 Shank Ripper ...................................$139,500

1998 Lull 844C-42, Stk# 7163, 8000 Lbs, 42’, 8191 Hrs, 4WD, 4WS, Air Filled Tires @ 40% Rubber, 48” Rotating Forks, Sliding Carriage, Hyd. Leveling System, 4 Cyl..................$18,500

2006 John Deere 450J LT, Stk# 7236, OROPS, 6-Way Blade, 797 Hrs, 80% U/C, 16” Pads, 8’1” Blade ....................................................$39,500

2005 Kubota KX41-3, Stk# 7156, OROPS, 1,201 2005 John Deere 450J LT, Stk# 7051, OROPS, 6 Hrs., Aux. Hyd., 12” Bucket, 9” Rubber Tracks, Way Blade, 1,950 hrs, 80% U/C, 16” Pads ........

52” Blade, 3 Cyl. Kubota Eng ................$14,500 ..............................................................$36,500

2004 Terex HR16, Stk# 6674, OROPS, 651 Hrs, 1996 Dorsey Van Trl., Stk# 6029, Refrigerator 50% U/C, Aux. Hyd, QC Bkt, 90˚ Boom, 24” Bkt, Van Trailer .............................................$12,500 Front Blade ............................................$16,500

2005 Komatsu D31EX, Stk# 7123, OROPS, 6Way Blade, 1171 Hrs, 16” Pads, 8’ Wide ........... ..............................................................$33,500

2005 Case 570M XT, Stk# 7179, OROPS, 2WD, 1,433 hrs., 60% Tires, GP Bucket w/Hyd. Box Blade .....................................................$18,500

2006 Komatsu D39PX, Stk# 7147, OROPS, Screens, Sweeps, 6 Way Blade, 2,095 hrs., 25" Pads, 9' 9" Blade ..................................$36,500

2008 Komatsu PC160LC7, Stk# 7052, EROPS, A/C, 2450 Hrs, 24” Bkt, 80% U/C, 28” Pads, 8’10” Wide ............................................$76,500

Page 4 • April 9, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

WESTERN EDITION Circulated Throughout • Alaska • Arizona • California • Colorado • Hawaii

• Idaho • Montana • New Mexico • Nevada • Oklahoma • Oregon • Texas • Utah • Washington • Wyoming

®

IN THIS ISSUE SPECIAL SECTION…

35

PAVING, COMPACTION & MILLING

Be sure to check out this special section!

Keep up to date with the latest information on paving, compaction and milling.

FEATURES…

35

12

SHORTAGE OF ROAD REPAIR CASH LEADS TO FEES

15

SUNNY SIDE GATEWAY PROJECT COMES TO AN END NEAR SAN DIEGO, CALIFORNIA

15

21

Hawaii drivers are being asked to pay about $50 more per vehicle on average annually to meet a shortfall in funds to repair the state’s potholed roads, a problem of the government’s own making.

With a total price tag of $520.5 million — which included design, right of way capital and construction capital — the SR 52 project was divided into three construction segments.

OKLAHOMA LAW LIMITS BUILDING HEIGHTS NEAR AIRPORT RUNWAYS

Airports in Oklahoma City, including Will Rogers World Airport, Wiley Post Airport and Clarence E. Page Municipal Airport, are exempt but military airports such as Tinker Air Force Base are protected by the law.

21

SOLAR PANEL MAKER MAY BUILD IN MESA, ARIZONA

A report said the world’s second-largest solar panel manufacturer is considering building a factory in Mesa that would bring about 600 new jobs.

24

24

JLG INDUSTRIES GRADUATES 6,000TH QUALIFIED INSTRUCTOR

The JLG Train-the-Trainer course gives instructors the most effective methods to teach aerial work platform (AWP) and telehandler operators how to work the equipment properly.

36

KIRBY-SMITH HOLDS PAIR OF PAVING SEMINARS IN OKLAHOMA

The company has invested more than $1,000,000 in the past year to enhance the training of the employees in order to back all its products and assist in the training of customers with events like the seminar.

36

56

OREGON COUPLE WANTS TO ‘ADOPT’ ARRAH WANNA BRIDGE

Bridge experts date the 117-ft.-long, 16-ft.-wide span as roughly a century old, from sometime in the 1910s or 1920s.

48 CLASSIFIEDS 54 COMING AUCTIONS 56 BUSINESS CALENDAR

EQUIPMENT… 36

24 HYSTER E30-40XN Electric Lift Truck 27 VERMEER S800TX Mini-Skid Steer 50 BOBCAT S850 Skid Steer

Founder, Publisher & CEO Vice President Emeritus Western Publisher Editor In Chief Associate Editor Editorial Consultant Production Mgr. Controller Circulation Mgr. Asst. Circulation Mgr.

Edwin M. McKeon Sr. Hal Ewing Edwin M. McKeon Jr. Craig Mongeau Ken Kolasinski Pete Sigmund John Pinkerton Tom Weinmann Rolf Krog Cathy Printz

Main office 470 Maryland Drive Fort Washington, PA 19034 Toll Free Fax Web site Editorial e-mail Advertising e-mail

215/885-2900 800/523-2200 215/885-2910 www.constructionequipmentguide.com

editorial@cegltd.com production@cegltd.com

For advertising rates: Contact Edwin M. McKeon Jr. National Sales Manager 215/885-2900 Toll Free 800/523-2200 Fax 215/885-2910 e-mail tmckeon@cegltd.com Contact Dale Agnew • Arizona • Colorado • New Mexico • Oklahoma • Texas • Wyoming

Toll Free 877/877-4997 Fax 972/695-6049 e-mail dagnew@cegltd.com Contact Frank Strazzulla • Alaska • California • Hawaii • Nevada • Oregon • Utah • Washington

949/459-1767 Fax 949/203-2859 e-mail fstrazzulla@cegltd.com Contact Patrick Kiel • Idaho • Montana

Toll Free 866/413-4265 Fax 952/353-2750 e-mail pkiel@cegltd.com Construction Equipment Guide Western Edition (ISSN 306-484) is published bi-weekly by Construction Equipment Guide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/5232200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates.

Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes to Construction Equipment Guide Western Edition, 470 Maryland Dr, Ft. Washington, PA 19034.

Contents Copyrighted ©2010, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 9, 2011 • Page 5

Š••ȹ ˜žÂ?ȹȌȹ ŠÂ&#x;Žǹȹȹ

2001 Komatsu PC138US-2, #80854, Blade, Aux Hyd, 8’ Arm, 4700 Hrs ..................$69,500

2006 Komatsu PC270LC-8LF, #81217, 60’ Long Reach, 33.5� Shoes, New Paint, 4500 Hrs ............................................................$156,000

2004 Komatsu D65EX-15, #80847, Cab/AC, 26� Shoes, Ripper, 4700 hrs ..............$159,500

2006 Komatsu WA250-5L, #81111, Cab/AC, QC/Bucket/Forks, 2750 Hrs ................$107,500

3-to-Choose!! Bomag BC1172RB Landfill Compactor, Cab/AC, Straight Blade, 7200+ hrs.. ........................................................Call Today!

2004 Ingersoll Rand SD45D, #80792, 800 Hrs, OROPS, 54� Smooth Drum ..................$46,500

2006 Deere 655C, #91256, Cab/AC, Ripper, 20� Tracks, GP Bucket w/ Teeth, Approx. 2500 hrs ......................................................$107,500

1998 Komatsu PC300LC-6LC, #91161, Aux Hyd, QC, 8950 Hrs ..........................................$82,500

2004 Komatsu HM400-1, #80617, Tailgate, 6700 Hrs................................................$189,400

2003 Komatsu WA450-5, #81365, Cab/AC, GP Bkt w/BOE, 8700 Hrs ..........................$114,500

2005 Komatsu WA200-5, #81316, Cab/AC, JRB QC/Bkt, LSD Axles, 4550 Hrs ................$99,500

2005 Komatsu D65EX-15, #80659, Cab/AC, Drawbar, 3600 hrs ..............................$149,500

Page 6 • April 9, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ASSE, OSHA to Focus on Past, Future of Work Safety SAVE TIME SAVE LABOR

SAVE MONEY SAVE OIL

The FlangeLock Tool allows for the simple sealing of open SAE Code 61, 62 & 62 KAT-Style hydraulic flanges without tools. Constructed out of lightweight high tensile strength T2200 anodized aluminum. Easy on, easy off. Offers a leakproof solution to hydraulic system and environmental cleanliness.

• No Tools Required • No Expensive Hardware Needed • No more Rags stuffed into hoses • No more messy Plastic Caps • The Ultimate Contamination Control Tool

• One hand Installation • Eliminate Hydraulic Oil Spills & Clean up • Quick Installation & Ease of Usage • Industry Acclaimed • 100% Made in USA • Safe for Personnel & Environment

For more information contact Mike Pearl

914.980.8890 email: mike@flangelock.com www.flangelock.com

Each year, thousands of businesses and people worldwide join with the American Society of Safety Engineers (ASSE), and its more than 33,000 occupational safety, health and environmental (SH&E) professional members to raise awareness about the importance of preventing work injuries and illnesses during North American Occupational Safety and Health (NAOSH) Week. This year’s NAOSH Week, May 1 to 7, is themed “Celebrating a Century of Safety” in honor of ASSE’s 100th Anniversary. Occupational Safety and Health Professional (OSHP) Day will be celebrated on May 4.

Joined by the Canadian Society of Safety Engineering (CSSE), the Occupational Safety and Health Administration’s (OSHA) Alliance Program participants and the Federal Motor Carrier Safety Administration’s (FMCSA) Commercial Motor Vehicle Safety Belt Partnership, ASSE and its members will sponsor events large and small aimed at spreading the word about being safe at work.

The NAOSH 2011 theme is “Celebrating a Century of Safety.” This is not only the 100th anniversary of ASSE, which sponsors NAOSH annually, but also the 100th anniversary of one of the most horrific workplace disasters in U.S. history. On March 25, 1911, 146 women and men died in the Triangle Shirtwaist Factory fire in the Asch building in New York City. That Saturday, when a fire started on one of the top floors of the Asch building, workers rushed to escape.

However, the doors were locked. There were no fire sprinklers even though many New England manufacturing facilities were using fire sprinklers as a safety precaution during that time. The fire sprinkler head was patented in 1872. There were no fire safety or prevention products or programs at the Triangle Factory. The fire escape had melted and broken off. The elevator operator tried desperately to save as many people as he could, but as the fire spread many jumped to their deaths to the street below with their clothes on fire. Many jumped into the elevator shaft hoping to survive. They did not.

Fire department ladders could not reach

the top floors of the building and thousands of New Yorkers lined the street and helplessly watched in horror as the workers jumped to their deaths to the street below. One of those onlookers was Frances Perkins who later became the first female U.S. cabinet member when she was appointed to serve as the U.S. Secretary of Labor.

Soon after, public outrage led to a wave of new worker protection rules and regulations.

Seven months later the American Society of Safety Engineers was founded in New York City, some say it was the beginning of the modern safety movement. Since that time ASSE and its occupational safety, health and environmental professional members continue to work in all industries and in their communities to make sure another Triangle Factory fire never occurs again.

NAOSH activities to support work safety and educate the public are held worldwide by individual members and organizations.

NAOSH kick-off events and educational programs are scheduled for Washington, D.C., this May 1 and 2, with ASSE members, federal and state officials, winners of the 9th annual ASSE kids “safety-on-thejob” poster contest and more.

The kick-off events in D.C. will be held at the U.S. Department of Labor (DOL), the U.S. Capitol, the National Zoo and the National Gallery of Art. The events will feature panel discussions on the history of safety, preventing distracted driving, teen worker safety and recognizing the young winners of both the ASSE and FMCSA art contests.

Past NAOSH Week events have included fleet safety classes, ergonomic awareness events, a workplace-oriented one-day free preparedness Web Expo, update on mining safety programs, a laser safety seminar, roadway work zone safety programs, corporate workplace safety and health days, teen worker safety programs, city and state work safety fairs, symposiums on a variety of topics, projects to assist charities, personal protective equipment (PPE), fashion shows, and much more.

For more information, visit www.aasse.org.

What’s going on in your company?

We want to know!

Give us a call.

Construction Equipment Guide

800/523-2200 or FAX 215/885-2910

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 9, 2011 • Page 7

THE ULTIMATE TEST OF MAN, MIND & MACHINE! Think you’ve got what it takes? Here’s your chance to prove it. The Case Triple Threat Rodeo is an operator skills competition that’ll test your mettle on a Case N Series loader/backhoe, F Series wheel loader and Alpha Series skid steer. It all starts at your local dealership for the preliminary round and ends at the National Championship held in Las Vegas. If you’re the best of the best, visit caserodeoseries.com Spectators and Fans win too!

Your dealer has special discounts and financing rates for everyone attending!

Triple Threat Rodeo: May 6, 2011 - Austin (Manor), TX - 512-272-8922 June 4, 2011 - San Antonio, TX - 210-333-8000 www.ascoeq.com

Download a QR app for your smartphone and scan this code for more details. http://bit.ly/ttrcoop

Triple Threat Rodeo: May 14, 2011 - Euless, TX - 817-283-2844 May 21, 2011 - Houston, TX - 281-987-1990 www.hiwayequip.com

Triple Threat Rodeo: Location: Richard M. Borchard Regional Fairgrounds April 30, 2011 - Robstown, TX - 361-289-0066 www.nuecespower.com

Call for Directions & More Information

© 2011 CNH America LLC. All rights reserved. Case is a registered trademark of CNH America LLC. Ram is a registered trademark of Chrysler Group LLC. Any trademarks referred to herein in association with the goods and/or services of companies other than CNH America LLC. and Chrysler Group LLC. are the property of their respective owners.

Page 8 • April 9, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

LeTourneau Super C Scraper w/Cab, 1:50 Scale ..........................................................$80

Caterpillar 416 Backhoe/Loader, 1:32 Scale.. ..................................................................$75

Allis-Chalmers HD21 Dozer/Ripper, 1:50 Scale ............$70 Allis-Chalmers HD-41 Dozer, 1:25 Scale......................$185 Bantam C-35 Crawler Shovel, 1:50 scale ......................$65 Bobcat A300 Wheel Loader, 1:25 Scale ........................$25 Bobcat M400 Gold 50th Anniversary Skid Steer Loader, 1:25 Scale ........................................................................$35 Bobcat M610 Golden 50th Anniversary Skid Steer Loader ..............................................................................$40 Bobcat M-743 Gold 50th Anniversary Skid Steer Loader, 1:25 Scale ........................................................................$35 Bobcat S175 Skid Steer Loader, 1:50 Scale..................$18 Bobcat S175 Skid Steer Loader, 1:25 Scale..................$40 Bobcat S185 Skid Steer Loader, 1:25 Scale ..................$30 Bobcat S205 Skid Steer Loader & Pick-Up Truck/Trailer Set, 1:50 Scale..................................................................$60 Bobcat 325 Mini-Excavator, 1:25 Scale ........................$30 Bobcat 753 Gold 50th Anniversary Skid Steer Loader, 1:25 Scale ........................................................................$30 Bobcat 773 50th Anniversary Skid Steer Loader, 1:25 Scale ................................................................................$30 Bobcat M200 Gold Skid Steer Loader, 1:25 Scale ........$35 Bobcat Tractor/Trailer Set, 1:50 Scale ..........................$85 Caterpillar AP655D Paver, 1:50 Scale ............................$65 Caterpillar CB-534D XW Asphalt Compactor, 1:50 Scale .. ..........................................................................................$50 Caterpillar D6K XL Track Type Tractor, 1:50 Scale ......$45 Caterpillar D6T XW Track-Type Tractor ........................$65 Caterpillar D8R Track Type Tractor, 1:50 Scale ............$45 Caterpillar D10T Track Type Tractor, 1:50 Scale ..........$85 Caterpillar D11R Track Type Tractor, 1:50 Scale ..........$50 Caterpillar D11T Track Type Tractor, 1:50 Scale ..........$85 Caterpillar 24H Motor Grader, 1:50 Scale ......................$90 Caterpillar 140M Motor Grader, 1:50 Scale....................$70 Caterpillar 226B2 Skid Steer Loader w/tools, 1:32 Scale .. ..........................................................................................$35 Caterpillar 247B2 Multi-Terrain Loader, 1:32 Scale ......$30

Caterpillar D11T Track-Type Tractor, 1:50 Scale ........................................................$85

All New in Box CALL Toll Free

800-523-2200 Ext. 197 Caterpillar 272C Skid Steer Loader, 1:32 Scale ............$30 Caterpillar 302.5 Mini-Excavator, 1:32 Scale ................$35 Caterpillar 323D L Excavator, 1:50 Scale ......................$50 Caterpillar 320D Excavator, 1:50 Scale..........................$65 Caterpillar 365B Excavator, 1:50 Scale..........................$65 Caterpillar 385C Excavator, 1:50 Scale..........................$60 Caterpillar 432E Side Shift Backhoe Loader, 1:50 Scale .... ..........................................................................................$45 Caterpillar 511OB Excavator, 1:50 Scale ......................$98 Caterpillar 623G Elevating Motor Scraper, 1:50 Scale $35 Caterpillar 725D Articulated Truck, 1:50 Scale ............$60 Caterpillar 772 Off-Highway Truck, 1:50 Scale ............$70 Caterpillar 785D Mining Truck, 1:50 Scale ..................$140 Caterpillar 836G Landfill Compactor, 1:50 Scale..........$50 Caterpillar 924 G Versalink Wheel Loader: 1:50 Scale $40 Caterpillar 950H Wheel Loader, 1:50 Scale ..................$45 Caterpillar 963D Track Loader, 1:50 Scale ....................$55 Caterpillar 966A Wheel Loader, 1:50 Scale ..................$45 Caterpillar 977 Traxcavator, 1:50 Scale ........................$35 Caterpillar 988H Wheel Loader, 1:64 Scale ..................$30 Caterpillar 992G Wheel Loader, 1:50 Scale ..................$70 Euclid R32 Off Highway Dump Truck (yellow), 1:50 Scale ..........................................................................................$50 Hitachi Zaxis 450 LC Excavator, 1:50 Scale..................$35

Collections Wanted, I Buy Collections

CEG Scale Models 470 Maryland Drive Fort Washington, PA 19034

John Deere 315SJ Backhoe Loader, 1:50 Scale ........................................................$35

Hitachi EH700 Off-Highway Truck, 1:50 Scale ..............$30 International 175 Crawler Loader w/Multi-Purpose Bucket, 1:50 Scale ..........................................................$50 International TD-15 Dozer, 1:87 Scale............................$40 International TD-24 Ag/Crawler, 1:50 Scale ..................$40 International TD-25 Dozer, 1:87 Scale............................$40 JCB 3CX Backhoe Loader, 1:50 Scale ..........................$45 JCB 456 ZX Wheel Loader, 1:50 Scale ..........................$65 John Deere 200D LC Excavator, 1:50 Scale ..................$40 John Deere 315SJ Backhoe/Loader, 1:50 Scale ..........$35 John Deere 400D Articulated Truck, 1:50 Scale ..........$40 John Deere 624K Wheel Loader, 1:50 Scale ................$45 John Deere 624K Military Wheel Loader, 1:50 Scale....$30 John Deere 748H Log Skidder, 1:50 Scale ....................$45 John Deere 850J Crawler Dozer, 1:50 Scale ................$40 Komatsu 960E Mining Truck, 1:50 Scale ....................$250 Komatsu WA500-6 Wheel Loader, 1:50 Scale ..............$60 Komatsu D51 EX Dozer, 1:50 Scale ..............................$60 Komatsu D51 PX Dozer, 1:50 Scale ..............................$60 Komatsu D375 Dozer, 1:50 Scale ..................................$85 Komatsu GD655 Motor Grader, 1:50 Scale....................$60 Komatsu HD605 Off-Highway Truck, 1:50 Scale ..........$70 Komatsu Mack Granite MP w/Talbert Lowboy Trailer, 1:50 Scale ................................................................................$75 Komatsu PC2000-8 Front Shovel, 1:50 Scale ............$225 Komatsu SK1020 Skid Steer Loader, 1:25 Scale ..........$40 Komatsu SK1026 Skid Steer Loader, 1:25 Scale ..........$40 Link-Belt 3200 All Terrain Crane, 1:50 Scale ..............$180 Link-Belt 80100 Rough Terrain Crane, 1:50 Scale ......$160 LeTourneau Super C Scraper w/Cab, 1:50 Scale..........$80 Northwest 25-D Backhoe, 1:50 Scale ............................$90 Northwest 25-D Shovel, 1:50 Scale................................$90 Volvo SD-122 Soil Compactor, 1:72 Scale ....................$40 Volvo BL71 Backhoe Loader, 1:50 Scale ......................$45 Volvo L90E Wheel Loader, 1:50 Scale ..........................$70 Volvo L350F Wheel Loader, 1:50 Scale..........................$75

Shipping and Handling Additional

Contact – Barry McKeon

800-523-2200

Ext. 197

• 610-506-5961 Cell

Email – bmckeon@cegltd.com

Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 9, 2011 • Page 9

Toll Free: (888)589-4546 Or (800)646-4546 email: Barry kleinproducts.com

The Original Since 1957

NEW WATER TRUCKS/ TANKS • SUPERIOR QUALITY • BEST VALUE IN STOCK FOR IMMEDIATE DELIVERY NEW KLEIN K2000

(6) NEW UNUSED FORD F750

20,000 GALLON “TRAP” TANK FOR CAT 777

CAT POWER, 6 SPD, 2,000 GALLON “TRAP” TANK

NEW KLEIN K800

(2) 2010 FTL M2 106

8,000 GALLON “TRAP” TANK FOR CAT 769

CUMMINS, 10 SPD, 4,000 GALLON “TRAP” TANK

NEW KLEIN K500

(2) NEW 2010 INTL 7400

5,000 GALLON “TRAP” TANK FOR CAT 725

MAXFORCE, ALLISON, 4,000 GALLON “TRAP” TANK

LD O S

ADDITIONAL UNITS IN PRODUCTION NOW. CALL TO RESERVE YOURS!

KLEIN KBT BARITE STORAGE TANK,

900 SACK CAPACITY, SELF CONTAINED AND PORTABLE

KLEIN PORTO-TOWER KPT-120

NEW 2,000 GALLON & 4,000 GALLON TANK KITS

The Original Mobile Water Tower, 12,000 Gallon Hydraulic Raise

For On the Road Trucks, Can Customize to Your Specification!

ALL EQUIPMENT SUBJECT TO PRIOR SALE • CALL FACTORY FOR SPECIFICATION AND PRICING DETAILS • Ontario, CA Jacksonville, TX • DEALER INQUIRIES WELCOME • VOLUME DISCOUNTS AVAILABLE

Page 10 • April 9, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONEXPO-CON/AGG 2011 CONEXPO from page 1

future business; exhibitors cited the high quality of customers and reported strong purchases and sales leads to new as well as existing customers.

“The construction industry has been through some very tough times, with record unemployment, since the last ConExpo-Con/AGG and IFPE in March 2008. With these positive numbers and the industry support of the shows, we’re optimistic about the future and looking forward to seeing these new sales orders fulfilled,” said Megan Tanel, AEM vice president of exhibitions and events.

“There was such a tremendous upbeat feeling at the shows; it was really great to see our industry looking ahead with some enthusiasm after the recession,” said Mike Haberman, chairman of the ConExpo-Con/AGG 2011 management committee and president of Gradall Industries.

A record number of more than 860 co-located events, educational programs and pre-planned meetings were held with the shows, plus dozens more meetings scheduled onsite. Colocations included ICON Expo for the concrete products industry and several annual conferences of national industry associations.

Quality Attendance, International Scope International registrations accounted for a record 24 percent of the total, representing more than 150 countries.

ConExpo-Con/AGG 2011 and IFPE 2011 were among a select group invited to participate in the U.S. Department of Commerce International Buyer Program, which facilitates the participation of international visitors. The shows hosted 42 official international customer delegations from 37 countries, organized by the U.S. Department of Commerce as well as in-country associations and related groups.

The majority of show attendees were key company decision-makers, including 44 percent with the top titles of president/owner and vice president/general manager/chief financial officer.

“The increased global participation by attendees and exhibitors underscores the importance of world markets to our industry. The U.S. economy is slowly improving and we have a ways to go, especially in construction, but after 18 to 24 months there is more pent-up demand for equipment to be ready for the upturn,” Tanel said.

“IFPE-related markets have fared somewhat better than construction and there definitely was a lot of positive momentum and interaction on the show floor. At both shows, attendees told us this was the place they needed to be to check out what’s new and get up to speed on the latest industry trends,” said Melissa Magestro, IFPE show director.

On the Show Floor Altogether on the show floor there were more than 2,400 exhibitors taking more than 2.34 million net sq. ft. of exhibit space. IFPE was the largest ever, and ConExpoCon/AGG’s exhibit space was the second largest in the show’s history.

Reinforcing the global scope of the shows were 10 international exhibit pavilions — IFPE with pavilions from China, Italy and Taiwan, and ConExpo-Con/AGG with pavilions from China, Finland, Germany, Italy, Korea, Spain and United Kingdom.

IFPE 2011 featured exhibit pavilions from the American Gear Manufacturers Association (AGMA) and the Power

see CONEXPO page 14

Matt Nelson (L) of Dynapac and Herb Lohnes of Diesel Machinery Inc. in Sioux Falls, S.D., interrupt their conversation for a quick photo op in front of the Dynapac CC224 HF roller.

(L-R): Enrico Perissinotto of PEMO pumps in Milan, Italy; Douglas Craver of ADEDGE Technologies in Scottsdale, Ariz.; have been talking about the PEMO pump with Dan Drinkwater of Crisp Industries/AZFAB in Bridgeport, Texas.

(L-R): Lawrence Olguin of Tractor Service in Albuquerque, N.M.; Dave Watson, NorAm; and Jack Zibert, also of Tractor Service, have been talking about the ease of service with the NorAm 65E.

Rick Jensen (L) of J&R Atkinson in Shellbrook, Canada, has learned a great deal about the stability of the Klein trap tank K-400 from Johnny Rainey, Klein Products Inc.

Curt Unger (L), president, LiuGong North America, takes a photo op with one of his dealers, Dave Hertz of Midwest Equipment, Vermillion, S.D., and the 835lll wheel loader.

(L-R): Michael Lalonde and Dennis McShaw of Westrax Machinery Inc., Rancho Dominguez, Calif., celebrate their March 16 contract signing to be a new LiuGong dealer with Curt Unger, president, LiuGong North America.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 9, 2011 • Page 11

Have an appetite for real power?

SERVICE SALES PARTS

HOUSTON

LOCATION Houston, Texas 77028 Phone: 713-636-4030 Toll-Free: 866-961-9358 les.info.houston@liebherr.com

Model

Serial #

Year

Hours SALES PRICE

Liebherr R944CHDSL Crawler Excavator

19482

06

1,622

$180,000.00

Liebherr R944CHDSL Crawler Excavator

19149

06

3,796

$145,000.00

Liebherr R944BEW W Crawle Crawlerr Mat’l Hndlr

12634

04

10,700

$220,000.00

Liebherr R944CHDSL/DEM R944CHDSL/DEMO O Crawler Excavator

18902

06

2,630

$170,000.00

Liebherr A944 Wheeled Ma Mat’l t’l Hndlr

10530

01

19,581

$210,000.00

Visit us on the web at: www.liebherrequipmentsource.com

Page 12 • April 9, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CATERPILLAR CRAWLER LOADERS bS

AND

bS

Cab or OROPS GP Bucket x | 7UDFNV x All Hour Ranges x x

CALL DOUG OR DAVE (866) 485-7180 WWW.RBUSED.COM

Shortage of Road Repair Cash Leads to Fees

By Mark Niesse ASSOCIATED PRESS

www.laser-grader.com The Laser-GraderŽ Model 106-P is a compact motor grader designed for precise fine grading. Laser-GraderŽ will offer an unusual blend of grading accuracy, versatility and production capacity. If accuracy is a requirement in your line of work, the Laser-GraderŽ equipped with an automated grade control package has no equal. • Tolerance to +/- 1/8� accuracy when using processed material • 5 FT inside, 9 FT outside Turning radius • Available in 22.5HP and 29HP Kubota Diesel Engines • Hydrostatic Transmission, 6 Wheel Drive Machine • Regularly used on amateur, scholastic and professional Baseball, Football and Soccer fields, as well as clay, grass and hard surface tennis courts • Single Slope, Dual Slope, Cross Slope and Sonic Tracing Capabilities • Ice Rinks, Building Pads, Sports Field Construction & renovation, Equestrian Arena Construction & Maintenance, Tennis Court Construction, Driveways, Large golf tees, Material Balancing, curb & gutter tracing, sideway grading, aggregate base for synthetic fields Contact us for more information!

19 Appian Way • Smithfield, RI 02917

401.231.8676 •

fax 401.231.8679

Gregg@Laser-Grader.com

HONOLULU (AP) Hawaii drivers are being asked to pay about $50 more per vehicle on average annually to meet a shortfall in funds to repair the state’s potholed roads, a problem of the government’s own making.

Lawmakers depleted highway funds over the years, taking $145 million that was meant to be used for transportation to pay for other programs. Only $17 million was left in February for road repairs, a relatively small amount compared to the $86 million annually the Department of Transportation said it needs.

Even when it became clear money was running short, state vehicle fees weren’t raised. They haven’t been increased since 1991. The result is legislators are proposing that vehicle registration fees jump from $25 to $45 a year, and weight fees would approximately double, with the heaviest vehicles paying the highest rates. “Something has to be done, and something has to be done now, and that’s why we’re asking for these fees,� said Department of Transportation spokesman Dan Meisenzahl. “No one wants to raise taxes, but this is the hand we’re dealt, and this is what we’re trying to do.�

But Sen. Sam Slom said drivers, many of whom already pay between $200 and $300 a year in fees, oppose the higher charges because lawmakers’ past actions have shown there’s no guarantee the funds will go toward road repairs. “It’s a further reminder of government not keeping its commitment, not keeping its promise, and not being able to

do the simplest things,� said Slom, R-Diamond HeadHawaii Kai. “If you can’t do the roads, how can you do education?�

Highway funds were last raided by the Legislature in 2003, Meisenzahl said. Lawmakers dipped into the funds several times during the eight years beforehand — when there was at times more than $100 million saved up — cumulatively using the $145 million taken for just about any state government purpose but roads.

The Department of Transportation is entirely funded by user fees and federal money, and it doesn’t receive any general state taxes collected, Meisenzahl said.

State residents shouldn’t fear that their vehicle fees would be put to any purpose but roads in the foreseeable future, said House Transportation Committee Chairman Joe Souki. “We cannot look at what has happened in the past. We need to look at the future and the present,� said Souki, DWaihee-Wailuku. “We have roads that need to be repaired, we have bridges that need to be repaired, we have highways to be made.�

Of course, it’s always possible that at some point in the future, if highway funds replenish themselves, lawmakers would again be tempted to use them to help balance the budget. The new fees would raise a combined $56 million a year for paving, repairs, drainage, traffic signs, guardrails, lighting, sidewalks, landscaping and storm cleanup on nearly 2,500 miles of state roads.

The money collected would be added to the $27 million the DOT is seeking to use in each of the next two years for road maintenance.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 9, 2011 • Page 13

FMC Factory Makes Way for New Earthquakes’ Stadium STADIUM from page 1

job, according to Ron Woodrum, senior project manager of Devcon Construction.

Currently PC750 and PC650 excavators are tearing down portions of the factory’s roof and outer building shell prior to demolishing the inner segments of the factory. Aside from excavators, skid steers and water trucks are currently being used onsite —with the skid steers mainly providing material separation services.

Once a significant portion of the factory has been torn down, Devcon will bring in a specialty crusher that will breakdown concrete and cement into backfill, which will be reused onsite, Woodrum said. Additional crushed material will be resold, which will aid the contractor in recouping some of the project’s costs.

During demolition operations, the San Jose Earthquakes development team is working to get a building permit approved by the city.

Once that happens, construction of the new

stadium will begin — a construction process that should take about a year to complete, according to team president David Kaval.

The new stadium is slated to look similar to a European-style, horseshoe-shaped soccer facility, with a roof covering the permanent seating to create intimacy.

The demolition of the ex-FMC factory and the beginning of the stadium project has been in the works for years, as in 2005 the city of San Jose paid $81 million for the property.

The city then spent an additional $19 million to clean up the site.

The San Jose Earthquakes were founded in the early 1970s.

After professional soccer was reborn in the United States with the founding of Major League Soccer, San Jose was awarded a charter franchise —the San Jose Clash.

In 2000, the team renamed itself the San Jose Earthquakes. Following a move to Houston the team was brought back to San Jose in 2008. CEG

Excavators help tear down part of the roof of the former FMC factory.

Ritchie Bros. Conducts Tightening the Belt...

Washington House Approves $8.9B Its Largest Auction Ever, Tops $58M Mark Transportation Budget, Makes Cuts Ritchie Bros. Auctioneers conducted a record-breaking $58 million two-day unreserved public auction in Las Vegas, Nev. March 24 to 25, 2011. The auction was the largest the site has ever conducted in terms of gross auction proceeds — the previous record of $48 million was set in March 2008. The Las Vegas auction also set new site records for number of lots sold (2,500 plus) and number of online bidders (2,200 plus).

“This was the most equipment we’ve ever sold in a Las Vegas auction and the large selection generated a lot of attention locally and internationally,” said Jim Rotlisberger, regional manager, Ritchie Bros.

Auctioneers. “We witnessed active bidding on all equipment types from bidders around the world throughout the auction, which resulted in strong returns for our consignors.”

Close to 5,000 bidders from 50 countries, including all 50 U.S. states and 10 Canadian provinces and two territories, registered to participate in the auction either on-site or online. More than 94 percent, or $54.9 million, of the equipment was sold to buyers outside the state of Nevada; more than 32 percent, or $19 million, of the equipment was purchased by out-of-country buyers from as far away as Colombia, Saudi Arabia, Lebanon, Australia and the United Arab Emirates.

The Las Vegas auction featured equipment from 400 consignors, including Wells Cargo, a Las Vegas-based heavy construction and paving contractor, who consigned a 2009 Caterpillar D10T crawler tractor, which sold for $1.25 million to a buyer from Dubai, UAE. “We are very pleased with our results from the auction,” said Ronnie Ambriz, equipment manager, Wells Cargo. “This is the second time we’ve consigned with Ritchie Bros. and we plan to maintain an ongoing relationship. When we sell with Ritchie Bros. we’re confident we will receive great returns because of the number of on-site and online bidders Ritchie Bros. attracts from around the world and from all industries.”

For more information, visit www.rbauction.com.

By Molly Rosbach ASSOCIATED PRESS

OLYMPIA, Wash. (AP) House lawmakers have overwhelmingly approved an $8.9 billion transportation budget for the next two years that supporters describe as a painful but prudent response to the current fiscal reality.

The House voted 89-6 March 25 to adopt the budget, which includes $1.1 billion for highway maintenance, $402 million for passenger rail and $237 million for ferry terminal and vessel projects.

Rep. Mike Armstrong, R-Wenatchee called it “a no-frills, tighten-the-belt kind of budget that is appropriate for the time we’re in.”

A recent revenue forecast showed the state’s overall deficit to be $780 million deeper than previously thought. State officials say the deficit for the 20112013 budget will be around $5 billion.

The transportation proposal includes fewer service cuts and a smaller rate hike for the Washington State Ferries system than Gov. Chris Gregoire had wanted originally.

The House budget cuts ferry service by $3.1 million, as opposed to Gregoire’s proposed cut of $20 million. House lawmakers say they targeted the runs that were not-heavily used.

Gregoire’s initial plan also included a ferry rate hike of 10 percent. The House bill puts it at 7.5 percent in 2011 and 2.5 percent in 2012. This year’s 7.5

percent rate hike includes the expected 2.5 percent annual increase, as well as a one-time 5 percent increase. Next year, riders will see another 2.5 percent annual increase, raising a total of $3.6 million over two years.

A big concern right now is the declining revenue from Washington’s gas tax, which is charged on a pergallon basis and is falling as people drive less and use more fuel-efficient cars. House lawmakers said they’re looking for alternative revenue sources for the future.

While the bill received strong bipartisan support, minority Republicans are still concerned that the proposal doesn’t do enough to fix the current transportation system.

“I think the taxpayers expect us to do much more than continue on the present course,” said Rep. Jason Overstreet, R-Blaine.

Several Republicans also were worried about the budget’s continuation of current programs that they don’t think are working, but in the end voted to approve the proposal.

“Is it the perfect budget? No. But it is a good budget,” said Rep. Jan Angel, R-Port Orchard. “I think we’ve done a good job.”

The Senate unveiled its own $9 billion transportation budget that largely mirrors the House version.

The House proposal now moves to the Senate for approval before final negotiations.

Page 14 • April 9, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONEXPO-CON/AGG 2011 CONEXPO from page 10

Transmission Distributors Association (PTDA), as well as an exhibit pavilion, which highlights the expanded presence of sensors manufacturers at the show. ConExpo-Con/AGG 2011 featured the IT & Business Solutions pavilion, sponsored by the Associated General Contractors of America.

Educational Opportunities Industry-focused education was an important component of the show experience, and there were a record number of education, training and certification programs offered.

ConExpo-Con/AGG’s education program featured a record 126 sessions across nine tracks, with sessions emphasizing industry issues and trends, management and applied technology, and numerous industry training and certification programs also were held. New for 2011 were a Crane and Rigging Conference and the Green Roads Summit.

At IFPE 2011, the 52nd National Conference on Fluid Power featured a record 114 presentations, and the Innovations Theater offered 14 sessions developed from abstract submissions for the conference. New for 2011 were national conference keynote presentations from leading industry and university researchers, and sessions from the Center for Compact and Efficient Fluid Power. IFPE also offered new college-level courses.

More than 80 allied associations and groups were official show supporting organizations, coming from the United States, Canada and more than a dozen countries worldwide.

They promoted the shows’ value and brought qualified buyer groups to the events, and many helped develop direction and content of the shows’ education programs to ensure they met industry needs.

see CONEXPO page 47

(L-R): Steve Inman, Maeda, has been learning how Tyler Poulsen and Treini Smith of Jacobsen Construction Co. in Salt Lake City, Utah, have been using their Maeda MC 405 on their new retail/residential job in downtown Salt Lake.

Dale Deweese (L), Werk-Brau Co., has been discussing the speed and efficiencies of the Bayonet Breaker/Werk-Brau hydraulic hammer/bucket system with Corky Underwood, inventor of the Bayonet Breaker in Prosper, Texas.

(L-R): Howard Bair and Gary Kuck of Augaize County Highway Department in Wapakoneta, Ohio, discuss the Broce RJT 350 with a gutter brush with Jim Cornelsen, Broce Manufacturing.

(L-R): It’s photo-op time for Ben Warner, Warner Tractor & Equipment Inc. in Troy, Pa.; Andea Zamboni, CEO of TESMEC; John Garner of TESMEC USA and the TRS 1075 bucket trencher.

Looking Ahead The next edition of the triennial ConExpo-Con/AGG and Tana Utley, vice president and chief technology officer IFPE expositions will be held in 2014 (March 18-22) at the of Caterpillar, cuts the ribbon to open Generations Park. Behind Utley is a Cat Twenty tractor.

Las Vegas Convention Center in Las Vegas.

David Haskins (L) of Cornell Pump Co. in Reno, Nev., learns about the structure of the RANCO LW 21040 from Johnny Aguilar, Dragon Products.

Safety, Training, Workforce Initiatives A Lift Safety Zone focused on cranes and other aerial lift equipment and ensuring adequate ground support for the machine and load carried. In conjunction with the Crane and Rigging Conference, a Crane Rodeo promoted education and safety at the same time as providing a hands-on operational experience. These and the many certification and training programs held at the shows helped ensure a properly trained workforce of equipment operators and other jobsite personnel.

The International Mixer Driver Championship by NRMCA recognized driver skills and inspection expertise.

The AEM teen-focused Construction Challenge competition presented by Volvo Construction Equipment generated interest in construction careers. The I Make America national grassroots campaign had a substantial presence to promote job-creation policies for manufacturing and construction that improve the economy and keep the U.S. globally competitive.

VIP Guests The shows welcomed visits from U.S. Secretary of Transportation Ray LaHood as well as U.S. Department of Commerce Assistant Secretary Suresh Kumar and numerous other government officials.

97

Crescent City

395 139

5

101 299 89

Burney Eureka 299 Rio Dell

CALIFORNIA STATE SECTION

395

299 44

44 36

101

89

Leggett

99

395

70

Chico

Oroville

5

49

Fort Bragg Point Arena 20 1

89

80 Tahoe City Auburn 50 South Lake Sacramento Tahoe

65

101

70 5

Santa Rosa

505 80

99

395 49

680

San Francisco

Sonora

Berkley 580 Oakland 280

120 120

120

6

Modesto

880

San Jose

140

99

41

5

101 1

395 152

Madera

Santa Cruz Montery

Fresno

33

180

190

198 1

Death Valley Junction

King City Lucia

198

65

101 127 46

178 15

14

San Luis 33 Obispo Santa Maria

Bakersfield

Baker

395

58

5

Barstow

101 14

Ventura

95

Glendale San Bernadino Los Angeles Riverside Santa Monica Santa Ana 10 Palm Springs Long Beach 1

“The Nation’s Best Read Construction Newspaper… Founded in 1957.”

40

15

1

Santa Barbara

101

10

5

15

86

Oceanside

Your California Connection – Frank Strazzulla – 1-877-7CEGLTD – fstrazzulla@cegltd.com

San Diego 8

Sunny Side Gateway Project Comes to an End

By Erik Pisor CEG CORRESPONDENT

After more than three years of construction, a 4-mi. (6.4 km) extension of existing State Route 52 — just east of the city of San Diego — was opened to traffic on March 29.

SR-52 is now an 18-mi. link that begins at State Route 67 in the city of El Cajon and ends near the coast at Interstate 5 in La Jolla.

Dubbed the Sunny Side Gateway Project, the job included the construction of a four-lane SR 52/State Route 67 interchange, two eastbound and westbound lanes along SR 52, and 13 bridges throughout the city of Santee, Calif.

With a total price tag of $520.5 million — which included design, right of way capital and construction capital — the SR 52 project was divided into three construction segments.

SR 52/SR 67 Interchange This $67 million interchange project began in May 2008 and encompassed the construction of four cast-in-place, prestressed concrete box girder bridges that reached 75 ft. (23 m) high, and made up the four freeway connectors, according to Kurt Thomas, senior project manager of Skanska USA Civil.

To construct the bridge connectors, 34 large cast-in-drillhole piles up to 3.38 yd. (3 m) in diameter and 33.9 yd. (31 m) long were driven.

The foundation subcontractor, Condon Johnson and Associates, used a pneumatic hammer drill unit mounted on a Manitowoc 4100 crawler crane to advance the piles through the overlying decomposed granite into the hard granite “rock sockets.”

In total nearly a million dollars worth of equipment and tools were used to conduct the bridges’ foundation work.

Aside from construction of the interchange, the project also entailed roadway improvements throughout the area including the widening of SR 67 near the interchange.

According to Thomas, one project challenge was the unanticipated rock encountered during the drainage and roadway excavation cuts.

SR 125 to Cuyamaca This 2-mi. (3.2 km), nearly $57 million extension of SR 52 began in January 2008 and was approximately a threeyear project, according to Duff Joseph, project superintendent of Lakeside, Calif.-based general contractor Erreca’s Inc. The project involved constructing two east and westbound lanes, from the point where SR 52 ended at State

Route 125 to Cuyamaca Street, and auxiliary lanes at the routes 52 and 125 interchange.

In total 11 bridges were constructed by Erreca’s at six different locations, with two of the bridges built above an existing San Diego Trolley line and near Gillespie Field, a small airport. During construction of these two bridges close coordination between Erreca and the Public Utilities Commission, the San Diego Trolley and Federal Aviation Administration (FAA) was necessary — especially during crane operations.

Equipment used on site included scrapers, excavators, backhoes, loaders, forklifts, motorgraders, cranes, bulldozers, compactors, deck finishing machines, pavers, rollers and dump trucks.

Upon completion of the SR 125 to Cuyamaca project 22,500 cu. yds. (17,202 cu m) of concrete was poured for 11 bridges, and 4.8 million lbs. (2.17 million kg) of rebar was used, according to Joseph. Additionally a total of 2,830 cu. yds. (2,163 cu m) of concrete and 543,000 lbs. (24,630 kg)

of rebar were used to construct six retaining walls and one box culvert. A total of 1.2 million cu. yds. (917,466 cu m) of earth was excavated or imported, and 35,250 tons (31,978 t) of asphalt concrete was poured.

Cuyamaca to Magnolia San Marcos, Calif.-based FCI Constructors was responsible for this $30 million, middle segment of the Sunny Side Gateway project, which included the construction of two eastbound and westbound lanes along SR 52 from Cuyamaca Street to Magnolia Avenue.

This segment represented a large earthmoving job, as close to one million cubic feet of dirt was moved prior to project completion.

The entire Sunny Side Gateway Project was partially paid for with $133 million from California’s Proposition 1B Transportation Bond Program and $35 million from San Diego County’s TransNet half-cent sales tax, according to Caltrans District 11. CEG

A hydraulic excavator removes dirt as part of drainage work near the routes 52 and 67 interchange site.

Page 16 • April 9, 2011 • www.constructionequipmentguide.com • California State Section • Construction Equipment Guide

Placer • Siskiyou • Shasta Butte• Marin • Solano • Sonoma • Calaveras • Tuolumne • Kern • Glenn • Nevada • Orange • San Diego • Riverside •California...

Los Angeles • San Bernardino • Santa Cruz • Trinity • Stanislaus • Inyo • Imperial • Fresno • Mendocino • Santa Barbara • El Dorado • Yolo • Contra Costa • Merced • Marin • Placer • Siskiyou • Shasta Butte• Marin • Solano • Sonoma • Calaveras • Tuolumne • Kern • Glenn • Nevada • Orange • San Diego • Riverside • Los Angeles • San Bernardino • Santa Cruz • Trinity • Stanislaus • Inyo • Imperial • Fresno • Mendocino • Santa Barbara • El Dorado • Yolo • Contra Costa • Merced • Marin Placer • Siskiyou • Shasta Butte• Marin • Solano • Sonoma • Calaveras •

‘Golden State’ Highway Lettings

The California Department of Transportation received bids for transportation-related improvement projects.

Following is a list of some of the projects let.

County: Kern Contract Number: 06-0M7104 Location: 06-KER-14-26.6/35.5 Project: Pave rubberized hot mix asphalt.

Number of Working Days: 50 Contractors and Bid Amounts: • Granite Construction Company — $3,171,676 • Sim J Harris Inc. — $3,599,555 • Bowman Asphalt Inc. — $3,975,355 • Griffith Comapny — $3,050,829 Counties: Solano, San Mateo and Santa Clara Contract Number: 04-1E6604 Location: 04-SCL-101-R25.3/R25.3, 04-SM-101R20.4/R20.4, 04-SOL-780-6.7/6.7 Project: Replace reinforced concrete railing.

Number of Working Days: 105 Contractors and Bid Amounts: • American Civil Contructors — $852,747 • Coast Construction Inc. — $933,209 • Viking Construction Company Inc. — $1,282,525 County: Riverside Contract Number: 08-334864 Location: 08-RIV-215-43.1/43.9, 08-RIV-60-11.5/12.2, 08RIV-91-20.3/321.6 Project: Replace highway planting.

Number of Working Days: 1,150 Contractors and Bid Amounts: • O Donnell Construction Inc. — $3,791,842 • Pacific Restoration Group Inc. — $3,951,709 • Griffith Company — $3,969,969 • Peterson-Chase General Engineering Construction, Inc. — $4,354,949 • Elite Landscaping, Inc. — $4,460,233 • Riverside Construction Company Inc. — $4,491,104 • Y A K A R — $3,478,831 (Unbalanced Bid) County: Various lacations Contract Number: 08-0L7904 Location: 08-RIV-10-68.0/156.5 Project: Install vehicle detection systems Number of Working Days: 360 Contractors and Bid Amounts: • Pave Tech Inc. — $4,921,860 • Dynalectric — $5,125,000 • Steiny And Company Inc. — $5,200,837 • Republic ITS — $5,567,490

• PTM General Engineering Service Inc. — $5,932,239 • CS Construction Inc. — $6,227,200 • DBX Inc. — $6,655,256 • All American Asphalt — $6,765,995 County: Sacramento Contract Number: 03-0F5904 Location: 03-SAC-5-0.0/17.2 Project: Pavement rehabilation with PCC slab.

Number of Working Days: n/a Contractors and Bid Amounts: • Granite Construction Company — $58,639,586 • Top Grade/George Reed JV — $59,358,538 • Desilva Gates Construction LP — $61,696,675 • Teichert Construction — $66,138,362 County: Los Angeles Contract Number: 07-4Y2504 Location: 07-LA-105-R4.7/R15.4 Project: Repair bridge joint seals.

Number of Working Days: 150 Contractors and Bid Amounts: • Western Structures — $1,037,188 • Powell Constructors Inc. — $1,061,061 • Peterson Chase General Engineering Construction Inc. — $1,173,735 • Truesdell Corporation Of California Inc. — $1,188,188 • O Donnell Construction Inc. — $1,291,030

• Myers And Sons Construction LP — $1,536,527 • Griffith Company — $1,981,780 Counties: Colusa, Glenn Contract Number: 03-3M1804 Location: 03-COL-45-20.1/34.2 Project: Replace ac paving.

Number of Working Days: 65 Contractors and Bid Amounts: • Sierra Nevada Construction Inc. — $1,409,007 • International Surfacing Systems — $1,412,403 • Franklin Construction Inc. — $1,421,421 • Northwest Paving — $1,428,715 • Windsor Fuel Company — $1,462,264 • Graham Contractors Inc. — $1,503,373 • Intermountain Slurry Seal Inc. — $1,629,855 • California Pavement Maintenance Company Inc. — $1,768,080 Counties: Plumas, Tehama Contract Number: 02-2E7004 Location: 02-PLU-36-7.9/8.8 Project: Grind and replace HMA thin blanket.

Number of Working Days: 30 Contractors and Bid Amounts: • Knife River Construction — $836,054 • Sierra Nevada Construction Inc. — $909,007 • J F Shea Construction Inc. — $913,701 • Tullis Inc. — $1,007,199

Construction Equipment Guide • California State Section • www.constructionequipmentguide.com • April 9, 2011 • Page 17

www w.jcbvision.com

SHOW ORDINARY SKID STEERS THE DOOR

BEST IN

BEST IN

BEST IN

BEST IN

BEST IN

SAFETY

VISIBILITY

COMFORT

EFFICIENCY

SERVICEABILITY

Industry’s only side door entry

60% better than competition

33% larger cab

Up to $3,000 in annual fuel savings

24% better SAE s

Nobody rivals our vision JCB has alwayys been a visionary company, from the invention of the backhoe loader, to the only skid steer with a side door. Now, we’ve redesigned our skid steer from the ground up. We’ve given it greater visibility, increased accessibility and made it more comfortable – all without saccrificing safety.

Step in our industry ’s only side door and you’ll learn why this is no ordinaryy skid steer.

For more information visit www.jcbvision.com

become a fan at www.facebook.com/jcb or visit our blog: www.jcbdirt.com

LO C AT I O N S

Muniquip 945 Stillwater Rd. • West Sacramento, CA 95605 877-383-7985 Fax: 916-375-2048 www.MuniquipJCB.com

Page 18 • April 9, 2011 • www.constructionequipmentguide.com • California State Section • Construction Equipment Guide

Faster cycles. Higher productivity Don’t be fooled by imitators. Thirty-plus years’ experience building the best hydrostatic dozers makes John Deere the brand for you. Innovations, like Total Machine Control (TMC), allow operators to customize machine response and operation to their personal preferences.

J-Series Dozers deliver unsurpassed productivity and uptime, along with the lowest possible daily operating costs.

And that’ just for starters.

To learn all about John Deere J-Series Dozers, give us a call.

RDO EQUIPMENT www.rdoequipment.com 83-300 Avenue 45 Indio, CA 92201 760-342-8900 13625 Danielson Street Poway, CA 92064 800-905-1150 3275 Hwy 86 Imperial, CA 92251 800-464-4331 20 Iowa Ave Riverside, CA 92502 800-494-4863

PAPE MACHINERY www.papemachinery.com Newark 800-231-2060 • 510-790-3600 Fax: 510-790-9120 Sacramento 800-227-3399 • 916-922-7181 Fax: 916-922-4532 French Camp 800-619-6319 • 209-983-8122 Fax: 209-983-1105

Fowler 559-834-4774 Fax: 559-834-4754 Rohnert Park 800-325-9401 • 707-584-9161 Fax: 707-584-4786 Gilroy 800-848-4150 • 408-848-4150 Fax: 408-848-5163 Redding 530-241-4555 Fax: 530-241-0619

Construction Equipment Guide • California State Section • www.constructionequipmentguide.com • April 9, 2011 • Page 19

®

S DON'T MIS THE NEXT IA CALIFORN ENT! SUPPLEM

THE CALIFORNIA STATE EDITION

April 28th Closing: ay 7th Publishing: M

ately Approxim

0 9,00 fied Quali rs Buye

Introducing Construction Equipment Guide’s Newest Western Sales Manager, Frank Strazzulla.

Call for Advertising or Editorial Information.

Toll Free 877-7CEGLTD 949-459-1767 • Fax: 949-203-2859 E-Mail: fstrazzulla@cegltd.com

ACERA MARK 9 EXCA EXCAVATORS VATORS

Page 20 • April 9, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

HIGH PERFORMANCE AND HIGH EFFICIENCY – YOU CAN HAVE BOTH. You can increase your productivity and lower your operating costs with a NEW Kobelco Acera Mark 9 hydraulic excavator. Only Kobelco offers their own SCR (Selective Catalytic Reduction) Tier 4 engine solution, used on both the SK260LC and SK295LC Mark 9 models. These SCR engines deliver more torque response and higher fuel efficiency – up to 18% better than Mark 8 models. The SK350LC Mark 9 utilizes CEGR (Cooled Exhaust Gas Recirculation) and offers increased horsepower for high performance, as well as even better fuel efficiency. All Mark 9 models feature Kobelco’s new economy mode — ECO-mode — which delivers an additional 10 to 19% increase in fuel efficiency.

The excavator expert gives you both performance and efficiency.

ALASKA

CALIFORNIA

Offer ends May 31, 2011 Enter the “Your Competitive Edge” sweepstakes* today! www.kobelcoamerica.com

COLORADO

ARIZONA

* Sweepstakes ends May 31, 2011. VVisit isit www.kobelcoamerica.com www.kobelcoamerica.com for official rules and to register. register. No purchase necessary to win. © 2011 CNH America LLC. Kobelco is a brand licensed to Kobelco Construction Machinery Company America LLC.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 9, 2011 • Page 21

New Restrictions...

IDAHO Glenn Dick Equipment Company Boise (208) 343-3621

NEW MEXICO Cisco Equipment NM Sales Artesia (575) 748-1314

OREGON Feenaughty Machinery Company Portland (503) 282-2566

TEXAS Abilene New Holland Abilene (325) 675-0602 Bane Machinery Dallas (214) 352-2468 Fort Worth (817) 847-5894 Houston (281) 443-7667 George P. Bane Tyler

(903) 597-6641

Cisco Equipment Lubbock (806) 745-9595 Odessa (432) 367-9181 CLM Equipment Company Baytown (281) 385-6633 Nueces Power Equipment Corpus Christi (361) 289-0066 Edinburg (956) 702-0066 Laredo (956) 725-0066 San Benito (956) 361-0066 Victoria (361) 576-0066 San Angelo Tractor San Angelo (325) 653-2121

WASHINGTON Farmers Equipment Company Burlington (360) 757-6081 Lynden (360) 354-4451 NewTec Kettle Falls

(509) 738-6621

Oklahoma Law Limits Building Heights Near Airport Runways

By Jennifer Palmer THE OKLAHOMAN

OKLAHOMA CITY (AP) A new law restricting the height of buildings near an airport may be flying under the radar with some developers.

The Oklahoma Aircraft Pilot and Passenger Protection Act took effect Oct. 1. It requires a permit from the Oklahoma Aeronautics Commission for proposed structures taller than 150 ft. (45.7 m) that are within 3 mi. (4.8 km) of an airport runway.

For example, a wind turbine near an airport, such as in Weatherford, would not be allowed under the law. But the Embassy Suites hotel in Norman is just shy of the 150-ft. limit, though it is within 3 mi. of the Max Westheimer Airport, and would not be affected.

Airports in Oklahoma City, including Will Rogers World Airport, Wiley Post Airport and Clarence E. Page Municipal Airport, are exempt but military airports such as Tinker Air Force Base are protected by the law.

So far, all six permits received by the commission have been approved, said Director Vic Bird. Though the commission has contacted many agencies to alert them of the new law, some people may still be unaware, he said.

Steve Schuller, an attorney with the Gable Gotwals law firm’s Tulsa office, said more attention should be brought to the law.

“It does restrict the use of your property, but for a good reason,” he said.

Bird said the intent of the law is not to discourage construction but to protect the safety of airports, pilots and passengers.

Wind Turbine Too High In Weatherford, a wind turbine constructed near the Thomas P. Stafford Airport runway caused the Federal Aviation Administration to alter the way pilots land there.

Landings there now require more steps by the pilot and are not ideal from a safety standpoint, Bird explained. And that’s what the Oklahoma Aeronautics Commission wants to avoid.

Developers still have to comply with FAA restrictions and city zoning laws, but the pilot and passenger protection act adds an extra layer.

“It not only gives us a say, but the final say,” Bird said.

Bird said the commission’s staff wants to work with developers and come up with reasonable solutions for both parties.

Solar Panel Maker May Build in Mesa PHOENIX (AP) A newspaper report said the world’s second-largest solar panel manufacturer is considering building a factory in Mesa that would bring about 600 new jobs.

The report by The Arizona Republic said Tempe-based First Solar Inc. declined to confirm Mesa had been chosen.

But the paper cited sources that said the panel maker is preparing to announce a deal while still working on terms.

First Solar has solar-panel factories in Ohio, Germany and Malaysia, with additional plants planned in France, Vietnam and possibly China.

The company announced in October that it planned to build two new manufacturing plants, one in the United States and the other in Vietnam.

First Solar spokesman Ted Meyer on Feb. 18 declined to confirm that the company is zeroing in on Mesa.

Mesa officials and members of the Greater Phoenix Economic Council, the region’s lead economic-development group, declined to comment.

Roc Arnett, president of the East Valley Partnership, an economic-development group that promotes Mesa, Tempe, Chandler and other southeast Valley communities, said there are a number of vacant industrial spaces in the region that could house such a manufacturing plant. They include spots near Phoenix-Mesa Gateway Airport in southeast Mesa, Chandler Municipal Airport in Chandler and the Falcon Field Airport in Mesa.

“If something like this does happen, you just know they are going to be the kind of good corporate citizens that Intel and Boeing have been for many years in the southeast

Valley,” he said.

Intel announced on Feb. 18 that it plans to build a new $5 billion factory that will create thousands of construction and manufacturing jobs in the Phoenix suburb of Chandler. The company already has a huge factory there that employs nearly 10,000 people.

First Solar, founded in 1999, has grown to become the world’s second-largest solar manufacturer after Suntech Power Holdings Corp. of China. It has been searching for months for a U.S. site to build a 238-megawatt factory to open in 2012.

Solar-manufacturing plants are compared by the amount of megawatts produced by the panels they make, not by the number of panels.

First Solar has projected it will produce solar panels totaling 2,742 megawatts in 2012. The new U.S. factory would represent about 9 percent of its total manufacturing capacity that year. One megawatt can generate enough energy for about 250 homes at once in direct sunlight.

Jordan Rose, an attorney who represents several renewable-energy companies in Arizona, said most manufacturing has been done overseas because of lower production and labor costs there. Now that panels are getting cheaper to build because of increased manufacturing efficiencies, production can be moved back to the United States.

First Solar’s main competitor, Suntech Power Holdings, opened a small factory recently in Goodyear and plans to make 50 megawatts of solar panels a year and employ 150 people.

Page 22 • April 9, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 9, 2011 • Page 23

KIRBY-SMITH MACHINERY INC. 6715 W Reno Oklahoma City, OK 73137 800-375-3339 405-495-7820 Fax: 405-787-5973 12321 E. Pine Street Tulsa, OK 74116 800-375-3733 918-438-1700 Fax: 918-437-7065 Abilene, TX 877-577-5729 325-692-6334 Amarillo, TX 800-283-1247 806-373-2826 Dallas, TX 800-753-1247 214-371-7777 Ft. Worth, TX 877-851-9977 817-378-0600 Lubbock, TX 866-289-6087 806-745-2112 www.kirby-smith.com

POWER MOTIVE CORPORATION 5000 Vasquez Blvd.

Denver, CO 80216 303-355-5900 Fax: 303-388-9328 Colorado Springs, CO 719-576-5541 Grand Junction, CO 970-241-1550 Milliken, CO 970-339-4098

ROAD MACHINERY LLC 4710A E. Elwood • Suite 6-7 Phoenix, AZ 85040 602-252-7121 Fax: 602-253-9690 Gilbert, AZ 480-778-5621 Tucson, AZ 520-623-8681 Prescott, AZ 928-778-5621 Albuquerque, NM 505-345-8383 Farmington, NM 505-324-8601 El Paso, TX 915-872-1001 Bakersfield, CA 661-695-4830 Perris, CA 909-355-3600 Redding, CA 530-229-3822 Sacramento, CA 916-375-3540 Cananea, Sonora, Mexico 011-52-6453328300

Page 24 • April 9, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

JLG Industries Graduates 6,000th Qualified Instructor JLG Industries Inc., recently graduated the 6,000th qualified instructor from the company’s Train-the-Trainer course held in Las Vegas. James Mason Jr., who is an outside machine shop apprentice instructor, was recognized with the honor. He received gift certificates for JLG merchandise and complimentary accommodations from the Orleans Hotel & Casino.

The JLG Train-the-Trainer course gives instructors the most effective methods to teach aerial work platform (AWP) and telehandler operators how to work the equipment properly, stressing the importance of operator training as it relates to increased workplace safety.

“As the use of aerial work platforms and telehandlers increases and the variety of applications grows, the need for programs — such as JLG’s Train-the-Trainer — has become more important than ever,” said Chris Mellott, JLG Industries vice president of sales and development of the Americas.

“We estimate that for every graduate of the program, five to 25 or more people receive qualified operator training every year in the safe use of JLG equipment. We are proud of these individuals, as workplace safety is of the utmost importance.”

The Train-the-Trainer instructor qualifica-

Jim Smith (L), manager of the JLG instructor development and operator training programs, and James Mason Jr. celebrate Mason’s graduation as the 6,000th qualified instructor.

The JLG Train-the-Trainer Course gives instructors methods to teach aerial work platform and telehandler operators how to work the equipment properly.

tion is valid for a five-year period; afterward, a refresher course is required to ensure instructors remain current with the new developments and changes within the industry. Attendance for JLG’s Train-the-Trainer program, since its inception in 1995, has grown an average of 10 percent or more each year. In North America, courses are

available in Atlanta, Ga., Houston, Texas, Las Vegas, Nev., McConnellsburg, Pa., and Riverside, Calif. Additional courses also are held in Europe and South America on a regular basis, and new courses are being developed for China and India.

Tom Hickey, manager of the JLG instructor development and operator training pro-

grams, leads the JLG Train-the-Trainer program. Hickey is one of three JLG Master Safety Training Instructors in North America, along with Jim Smith and Jose Orozco, a bilingual Spanish/English instructor. Other JLG Train-the-Trainer instructors, located in Europe and South America, teach the program in countries outside North America.

For more information, visit www.jlg.com/en-us/Training.html.

Hyster Company Unveils Next Generation of Electric Lift Truck Hyster Company has unveiled its next generation of electric lift trucks. The new Hyster E30-40XN series delivers lifting capacities of 3,000 to 4,000 lbs. (1,361 to 1,814 kg) and offers significant performance and versatility for a wide variety of material handling applications.

“The E30-40XN series is one of the most operator-friendly ACpowered lift trucks in the world,” said Brett Schemerhorn, vice president of dealer sales, Hyster Company. “It sets a new standard in electric lift trucks by lowering overall operating costs and energy consumption while maximizing productivity. You can count on this workhorse to get the job done.”

The series includes: • newly designed, operator compartments • sixteen percent more floor space • relocated multifunction dis-

plays that ensure enhanced visibility and precise pallet control • improved brake pedal layout • auto deceleration system, which reduces operator fatigue • steel hood that provides for maximum battery service access By utilizing AC motors and transistor controller technology for both the traction and hydraulic systems, Hyster has reduced the frequency and cost of maintenance.

The Hyster-designed thermal management system continuously monitors the E30-40XN series’ controller and motor temperature and, upon identifying irregularity, the system protects the component by automatically adjusting truck performance, according to the manufacturer.

According to the VDI Energy Cycle Standardized Test, the E3040XN series consumes the lowest amount of energy when compared to similar lift trucks. As an addi-

tional benefit to reducing the environmental impact, better energy utilization results in increased savings and return on investment.

“This is a tough, smart and purpose-built lift truck,” Schemerhorn said. “It’s what you expect from Hyster.”

About Hyster Company Based in Greenville, N.C., Hyster Company offers 130 models configured for gasoline, LPG, diesel and electric power, with a capacity range from 2,000 to 115,000 lbs.

Hyster Company is an operating division of NACCO Materials Handling Group Inc. (NMHG), which employs approximately 4,500 people worldwide. NMHG is headquartered in Cleveland, Ohio, and is a wholly owned subsidiary of NACCO Industries Inc. (NYSE:NC).

The Hyster E30-40XN series delivers lifting capacities of 3,000 to 4,000 lbs. (1,361 to 1,814 kg).

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 9, 2011 • Page 25

Cash is king – Make more money & spend less with Hyundai 9 Series machines.

VALUE

• More Standard Features • Industry-Best Total Coverage Warranty • Hi-mate Remote Management service – FREE for 3 years • Industry-Leading Fuel Economy

Y

A

CALIFORNIA

TEXAS

MecoM equipMent Stockton, CA 209-466-5135

FouR SeASonS equipMent Dallas, TX 214-388-1700 Houston, TX 281-807-9777

Rick AlbeRt MAchineRy (RAM) Antioch, CA 510-504-5086

NDA

Alvin equipMent Alvin, TX 281-331-3177

T

W

3-year / 3,000-hour full machine warranty & 5-year / 10,000-hour structural warranty

YU

I

Industry’s Best Total Coverage Warranty:

H

• Industry-Leading Cycle Times

R R A N

www.hyundaiamericas.com

WASHINGTON

Jet city equipMent Oak Harbor, WA 360-675-4441 North Seattle, WA 360-651-9079 Wenatchee, WA 509-888-8181

Page 26 • April 9, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CASE AUTHORIZED DEALERS

HAWAII

ALASKA Yukon Equipment Company

Allied Machinery Corp.

Anchorage Fairbanks

Kailua-Kona Kea-Au Lihue Wailuku Waipahu

(907) 277-1541 (907) 457-1541

ARIZONA

(808) 334-0102 (808) 982-7728 (808) 245-8581 (808) 986-0691 (808) 671-0541

Bingham Equipment Casa Grande Parker Yuma

(520) 836-8700 (928) 669-9271 (928) 726-4701 (928) 526-5991 (602) 269-3221

Tucson Tractor Company Tucson

Burks Tractor Company Caldwell Twin Falls

Falcon Power Flagstaff Phoenix

IDAHO (208) 466-7875 (208) 733-5543

Pioneer Equipment Company Idaho Falls

(208) 523-5455

(520) 623-5848

MONTANA Titan Machinery

CALIFORNIA Case Power and Equipment Redding Sacramento Stockton

(530) 245-9000 (916) 649-0096 (209) 464-9600

D3 Equipment El Cajon Fontana Santa Fe Springs

(619) 873-0123 (909) 355-1075 (562) 903-7377

Diamond A. Equipment Oxnard Santa Maria

(805) 485-2103 (805) 925-1869

(406) 388-5500 (406) 259-5500 (406) 453-1405 (406) 543-7782

NEVADA Case Power and Equipment Sparks

(775) 358-5000

Hertz Equipment Rental Las Vegas

(702) 876-2223

NEW MEXICO

Pioneer Equipment Bakersfield

Belgrade Billings Great Falls Missoula

(661) 327-1641

Adobe Truck & Equipment Albuquerque

(505) 342-2566

Sequoia Equipment Company Fresno

(559) 441-1122

OKLAHOMA Construction Agricultural Supply

COLORADO Adobe Truck & Equipment Colorado Springs

*Contest ends July 25, 2011. See official rules on entry form. No purchase necessary to win. ©2011 CNH America LLC. All rights reserved. Case is a registered trademark of CNH America LLC. www.casece.com

(719) 596-2924

Lawton

Hisle Brothers

(580) 353-3211

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 9, 2011 • Page 27

Vermeer S800TX Mini-Skid Steer Offers Lifting Versatility

UTAH

OREGON Case Power and Equipment

Century Equipment Company

Portland Salem

Cedar City Logan Salt Lake City Spanish Fork

(503) 283-2461 (503) 362-1371

Central Equipment Company Medford

(541) 779-7443

Central Machinery Sales Hermiston

(801) 731-0470

Case Power and Equipment (512) 272-8922 (210) 333-8000

Construction Agricultural Supply (940) 322-9950

Heritage Equipment Company Amarillo Lubbock

Ogden

WASHINGTON

ASCO

Wichita Falls

MAW Equipment

(541) 567-2331

TEXAS Manor San Antonio

(435) 586-4406 (801) 262-5761 (801) 262-5761 (801) 794-1463

Auburn Marysville

(253) 735-2702 (360) 651-2171

Central Machinery Sales Moses Lake Pasco Sunnyside

(509) 765-1257 (509) 547-8920 (509) 837-3833

(806) 335-2861 (806) 745-4451

Mid Mountain Machinery

(281) 331-1521 (409) 212-8100 (979) 836-6641 (979) 779-8942 (817) 283-2844 (940) 665-4314 (281) 987-1990 (713) 649-0940 (903) 753-4481 (903) 893-7586 (903) 593-0201

WYOMING

Spokane

(509) 838-3546

Hi-Way Equipment Alvin Beaumont Brenham Bryan Euless Gainesville Houston North Houston South Longview Sherman Tyler

Nueces Power Equipment Corpus Christi Edinburg Laredo San Benito Tye Victoria Vinton

(361) 289-0066 (956) 702-0066 (956) 725-0066 (956) 361-0066 (325) 692-5253 (361) 576-0066 (915) 541-0066

Century Equipment Company Rock Springs

(307) 382-6570

Titan Machinery Casper Cheyenne Gillette

(307) 234-5381 (307) 638-4400 (307) 682-9742

With a rated tip capacity of 2,400 lbs. (1,089 kg) and SAE operating capacity of 840 lbs. (381 kg), the new Vermeer S800TX mini skid steer can efficiently lift and transport a large load of material in and around confined spaces.

Vermeer Corporation’s S800TX miniskid steer features a rated tip capacity of 2,400 lbs. (1,089 kg) and rated SAE operating capacity of 840 lbs. (381 kg), all in a compact frame, enabling contractors to lift and transport pallets and bucket loads in and around confined spaces.

“Our customers wanted more lifting capacity and increased performance in a small package,” said Jon Kuyers, compact and utility segment manager of Vermeer.

“They also wanted more productivity, more horsepower and a machine with the ability to carry a larger load to and around confined spaces with exceptional visibility. The S800TX delivers on all accounts.”

The S800TX is powered by a 35-hp (26.1 kW) diesel engine, providing power and breakout force. And measuring just 40.5 in.

(103 cm) in width, the S800TX offers a narrower footprint than other mini skid steer models with similar horsepower and operating capacity ratings, enhancing maneuverability and access to confined spaces, according to the manufacturer.

The hydraulic system of the S800TX is capable of providing 14 gpm (53 Lpm) of hydraulic flow that helps more efficiently power a variety of attachments. An optional dual auxiliary hydraulic circuit helps provide operational efficiency with varying attach-

ments. A universal mounting plate allows operators to quickly swap out attachments, making the S800TX versatile in the field.

“The S800TX is a flexible, powerful workhorse in a compact frame suitable for many applications,” Kuyers said. “Although it was developed primarily for small to midsize contractors and landscapers, it will have a fit in many different markets and a variety of applications.”

Features to enhance operator comfort and safety also have been incorporated into the S800TX design, including a spring-cushioned ride-on platform that offers broad job site visibility and ease of stepping on and off the machine. An operator presence system, integrated into the ride-on platform, automatically suspends ground drive and powered boom / bucket motion if the operator steps off the platform. Console cushions positioned to the front of the operator and on either side help increase operator comfort, particularly when working on uneven terrain.

The S800TX ground drive is controlled by a single, pilot-operated joystick for a smooth range of motion. Boom / bucket motion is controlled by a single, dual-axis joystick.

For more information, visit www.vermeer.com.

Page 28 • April 9, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

A VERSATILE INVESTMENT

TOOLS FOR EARTHMOVING LOADER BACKHOES

Put TEREX loader backhoes on the job and ROI is a given. Designed to speed cycle times, our highly-productive machines boast 5 degrees more fill capacity and 13 degrees better discharge over competitive units. Ruggedly reliable, they tackle rough terrain with ease, offering 19.5 inches of ground clearance versus the competition’s 15 inches.

Meanwhile, the widest stabilizer spread and narrowest boom in the industry keep operators grounded and focused on the job at hand.

For more information on TEREX products, contact:

FOUR SEASONS EQUIPMENT INC. Houston TX 281/807-9777 Fax: 281/807-1233 Dallas TX 214/388-1700 Fax: 214/388-0107

San Antonio TX 210/667-1285 Fax: 210/667-2169 Lake Charles LA 337/626-6000 Fax: 337/626-7600

Hlavinka Equipment Co. h l a v i n k a @ h l a v i n k a . c o m • w w w. h l a v i n k a . c o m

East Bernard, TX 77435 979/335-7528 Rosenberg 281/342-5527

El Campo 979/543-3301 Bay City 979/245-4630

Nome 409/253-2244 Tivoli 361/286-3571

www.terex.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 9, 2011 • Page 29

Ditch Witch of Oklahoma/Tulsa Edmond, OK 73034 405-348-4633 Fax 405-341-7831 Tulsa, OK 74128 918-438-1560 Fax 918-438-1564

Vermeer of Texas-Louisiana www.vermeertexas.com Alamo, TX 956-782-5580 Amarillo, TX 806-622-2407 Corpus Christi, TX 361-887-8499 Denham Springs, LA 225-665-7900 Elm Mott (Waco), TX 254-829-9655 Irving, TX 972-255-3500 Houston, TX 713-910-4000 Humble, TX 281-446-2222 Kilgore, TX 903-988-9868 Lubbock, TX 806-762-0609 Round Rock, TX 512-244-0505 San Antonio, TX 78219 210-337-7700

Page 30 • April 9, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 9, 2011 • Page 31

Trenching—The Way It Should Be. You may have noticed something different about our most recent trencher models. Our new walk-behinds— the compact RT10, RT12 and RT24—offer a choice of high-flotation tires or heavy-duty oscillating tracks, both of which provide outstanding stability and traction. And the mighty RT115 Quad’s innovative chevron track pattern provides maximum traction in wet conditions and on slopes. With every Ditch Witch® trencher you can count on the hardest-working, longest-lasting machine in its class—that will never change. See your dealer for more information, or visit ditchwitch.com.

ditchwitch.com RT12

RT10

RT24 Witch Equipment Co., Inc. Witch Equipment Company, Inc. Fort Worth, TX | 817-429-4824

Ditch Witch of New Mexico, Inc. Ditch of Houston Albuquerque, NM Witch | 505-345-1888

Ditch Witch of Tulsa

Ditch Witch of Arizona

Houston, TX | 713-462-8866

Ditch Witch Oklahoma Tulsa, OK of | 918-438-1560 Edmond, OK | 405-348-4633

Ditch Witch of Phoenix, AZArkansas | 602-437-0351 Benton, AR | 501-316-3200

Fort Worth, TX | 817-429-4824

Witch Equipment Co., Inc. Witch Equipment Company, Inc. Hewitt, TX | 254-666-3344 Hewitt, TX | 254-666-3344

Ditch Witch of East Texas Ditch Witch of East Texas Tyler, TX | 903-592-6226 Tyler, TX | 903-592-6226

Ditch Witch of Arkansas Ditch Witch of Tulsa Springdale, AR | 479-419-9771 Tulsa, OK | 918-438-1560

Ditch Witch of Southern Arizona Ditch Witch of Arizona Tucson, AZ | 520-579-0261 Phoenix, AZ | 602-437-0351

DitchWitch WitchofofNew Oklahoma Ditch Mexico, Inc. Edmond, OKNM | 405-348-4633 Albuquerque, | 505-345-1888

Ditch DitchWitch WitchSouthwest Southwest Lubbock,TX TX || 806-745-6866 Lubbock, 806-745-6866

Ditch Witch of Arkansas Ditch Witch of Arkansas Benton, | 501-316-3200 Springdale, AR | AR 479-419-9771

Ditch Witch of Houston Ditch Witch of Southern Arizona TX | 713-462-8866 Tucson, Houston, AZ | 520-579-0261

RT115 QUAD ©2010 The Charles Machine Works, Inc.

Page 30 • April 9, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 9, 2011 • Page 31

Trenching—The Way It Should Be. You may have noticed something different about our most recent trencher models. Our new walk-behinds— the compact RT10, RT12 and RT24—offer a choice of high-flotation tires or heavy-duty oscillating tracks, both of which provide outstanding stability and traction. And the mighty RT115 Quad’s innovative chevron track pattern provides maximum traction in wet conditions and on slopes. With every Ditch Witch® trencher you can count on the hardest-working, longest-lasting machine in its class—that will never change. See your dealer for more information, or visit ditchwitch.com.

ditchwitch.com RT12

RT10

RT24 Witch Equipment Co., Inc. Witch Equipment Company, Inc. Fort Worth, TX | 817-429-4824

Ditch Witch of New Mexico, Inc. Ditch of Houston Albuquerque, NM Witch | 505-345-1888

Ditch Witch of Tulsa

Ditch Witch of Arizona

Houston, TX | 713-462-8866

Ditch Witch Oklahoma Tulsa, OK of | 918-438-1560 Edmond, OK | 405-348-4633

Ditch Witch of Phoenix, AZArkansas | 602-437-0351 Benton, AR | 501-316-3200

Fort Worth, TX | 817-429-4824

Witch Equipment Co., Inc. Witch Equipment Company, Inc. Hewitt, TX | 254-666-3344 Hewitt, TX | 254-666-3344

Ditch Witch of East Texas Ditch Witch of East Texas Tyler, TX | 903-592-6226 Tyler, TX | 903-592-6226

Ditch Witch of Arkansas Ditch Witch of Tulsa Springdale, AR | 479-419-9771 Tulsa, OK | 918-438-1560

Ditch Witch of Southern Arizona Ditch Witch of Arizona Tucson, AZ | 520-579-0261 Phoenix, AZ | 602-437-0351

DitchWitch WitchofofNew Oklahoma Ditch Mexico, Inc. Edmond, OKNM | 405-348-4633 Albuquerque, | 505-345-1888

Ditch DitchWitch WitchSouthwest Southwest Lubbock,TX TX || 806-745-6866 Lubbock, 806-745-6866

Ditch Witch of Arkansas Ditch Witch of Arkansas Benton, | 501-316-3200 Springdale, AR | AR 479-419-9771

Ditch Witch of Houston Ditch Witch of Southern Arizona TX | 713-462-8866 Tucson, Houston, AZ | 520-579-0261

RT115 QUAD ©2010 The Charles Machine Works, Inc.

Page 32 • April 9, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CLM Equipment Co., Inc. Baytown/Houston, TX 281/385-6633 281/385-7106 Fax www.clmequipment.com

Broussard/Lafayette, LA 337/837-6693 337/837-2384 Fax Sulphur/Lake Charles, LA 281/625-5942

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 9, 2011 • Page 33

The Difference is in the D-tails.

You asked. We delivered. Our D-Series Skid Steers are loaded with customer-recommended enhancements, like larger operator stations, quiet pressurized cabs with best-in-class visibility, and curved-glass swing-out doors.

D-Series innovations include an exclusive cooling system with available hydraulically driven variable-speed fan that reverses to clear core-clogging buildup. Plus options such as electrohydraulic joysticks, variable boom and bucket speed settings, and more than 100 attachments to let you take on more tasks.

Packed full of best-in-class productivity and uptime-enhancing features, the D-Series are destined to become owner and operator favorites. Ask for a demo today.

www.johndeere.com DESERT GREENS EQUIPMENT INC. 4850 Pan American Freeway NE Albuquerque NM 87109 505/822-0311 505/821-7420 Fax MUSTANG EQUIPMENT www.mustangequipment.com 3053 So. US Hwy. 281 Marble Falls, TX 78654 830/693-5414 830/693-5617 Fax

RDO EQUIPMENT CO. www.rdoequipment.com 3230 East Airport Fwy. Irving, TX 75062-4909 972/438-4699 972/438-6789 Fax Fort Worth, TX 817/232-8094 Pflugerville, TX 512/272-4141

TRACTOR CITY www.tractorcity.com 2800 SE Loop 410 San Antonio, TX 78222 877/648-1765 • 210/648-1765 210/648-1738 Fax

YELLOWHOUSE MACHINERY CO. PO Box 31388 Amarillo TX 79120 800/658-9868 806/335-3932 Fax

Enid OK 800/522-0385

Lubbock TX 800/658-9878

McAlester OK 800/329-2555

Odessa TX 800/658-9888 Abilene TX 800/592-4468 San Angelo TX 800/658-9130 Wichita Falls TX 877/658-9877

Tulsa OK 800/375-5926

Page 34 • April 9, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Page 36 • April 9, 2011 • www.constructionequipmentguide.com • Paving, Compaction & Milling Section • Construction Equipment Guide

Kirby-Smith Holds Pair of Paving Seminars in Okla.

F

or the second year in a row, KirbySmith Machinery Inc. conducted paving seminars in Oklahoma City and Tulsa, Okla., on Feb. 22 and 24, respectively. Together, the events drew nearly 230 participants.

“We truly believe in giving back to those industries that have helped us grow and prosper for the last 28 years and we are committed to continuing our efforts to ensure you do too,” Ed Kirby, president of KirbySmith Machinery Inc. said, in a letter to seminar attendees explaining the company’s sponsorship.

The welcoming letter is the first page in the seminar workbook presented to all participants.

According to Kirby, the company has invested more than $1,000,000 in the past year to enhance the training of the KirbySmith employees in order to back all its products and assist in the training of customers with events like the seminar.

“We are committed to being the ‘paving authority’ for all your paving projects and equipment needs,” said Kirby.

The Tulsa seminar opened with a welcoming talk and introduction of Kirby-Smith employees and the presenters by Kelly Littlefield, sales manager of the Tulsa area.

“As the ‘paving authority,’ we have taken this opportunity to present programs conducted by experts in their own field, therefore promoting better practices and safety procedures to make a more lasting and efficient paving project,” said Littlefield.

The presenters were paving industry experts from dedicated paving manufacturers and included: Jeff Wiley, senior vice president of sales and marketing for Wirtgen America, who has more than 30 years of experience in the industry discussed milling and stabilization.

During the Best Milling Practices presentation subjects such as when to use fine milling for smoothness and revitalization of skidresistant surfaces were discussed along with cutting patterns, cutter drums, tooth rotation and milling speeds. Soil stabilization and cold recycling portion of the class drew a lot of attention.

L. “Nars” Narsingh, product and product support manager of Vögele, who has more than 21 years in the paving industry conducted paving classes on topics ranging from good paving practices to free floating screeds, non-contact continuous paving and longitudinal joint construction.

Jeff Wiley, senior vice president of sales and marketing of Wirtgen, has the full attention of the audience during his Milling Best Practices presentation.

Mark Odom, regional product support manager of LeeBoy, presented the “Chip N Seal”/Distributor Units program. With 33 years experience in the industry, Odom is one of the foremost experts in the field. The

presentation included not only techniques and maintenance but also factual information about liquid asphalt.

Tim Kowalski, applications support manager of Wirtgen America, who has more than

Steve Reed (L) and Zac Marta from the City of Grove, Okla., have been taking a hands-on tour of the Vögele 5200-2 Vision paver.

20 years experience with the quality control side of asphalt, aggregates and concrete projects, hosted “Compaction 101” and advanced compaction presentations centered around the reasons for compaction using different methods which included Dynamic compaction (vibration/oscillation) static, impact and kneading. Kowalski described the different soil types for the base, obstacles and how to resolve these obstacles and the different types of equipment used to accomplish the best compaction projects.

“The seminars were so successful last year that we had multiple requests to do an encore performance you might say,” said George Denny, director of sales and marketing. “Last year we had a continuous program where everyone was exposed to all aspects of paving. We learned that not everyone had an interest in all the programs, so this year we arranged to have ‘break-out’ sessions.

“These sessions allowed the attendees to participate in only those subjects that had a direct effect on their jobs. We had a complete set of ‘break-out’ sessions in the morning and a duplicate set in the afternoon so each person could attend the ones he/she wanted if they had a conflict in the morning.”

The day-long seminar included ample time for participants and presenters to interact with each other and and equipment with “walk-a-rounds” to view the Wirtgen, Hamm, Vögele, Rosco and LeeBoy products on display.

Construction Equipment Guide • Paving, Compaction & Milling Section • www.constructionequipmentguide.com • April 9, 2011 • Page 37

Page 38 • April 9, 2011 • www.constructionequipmentguide.com • Paving, Compaction & Milling Section • Construction Equipment Guide

MODEL

CASE DV201 DV207 SV210 PT240

DRUM WIDTH IN. (CM)

ENGINE TYPE

39.4 (100) 57.1 (145) 66 (170) 78.2 (199)

Deutz D2011 L2 Cummins BTAA 3.3 Cummins QXB 3.3 C99 Cummins QSB 3.3

SAKAI Soil Compactors SV201TB-1 SV400T-2 SV510TB-III

Kubota V3307- Tier III Deutz TCD2011L04W Cummins QSB4.5

Asphalt Rollers CR270 SW652ND-1 GW750-2 WP2500 WolfPac 4100

Honda GX-610 Kubota V3307-DI-T-KDN Isuzu 4JJ1XDIA Honda GX340 Kubota Diesel D902

35.5 (90) 58 (147) n/a 28/32 (71/81.3) 40 (101.6)

TRUCTION TEREX CONSKub ota D1703-M

97.6 (248) 181 (460) 122 (309) 243 L, 239 R (618 L, 606 R)

42.9 (109) 60.6 (153) 76 (193) 82.7 (210)

54 (1,370) 67 (170) 84 (213)

47.2 (120)

DD118HFA DD138HF DD77DA

78.7 (200) 84 (213.5) 66 (167.5)

Cummins QSB 4.5 Tier 3 Cummins QSB 4.5 Tier 3 Kubota V3800DI Tier 3

WACKER NEUSON RD 7H-ES RSS 800A RT 56-SC-2 RD 27-120

MODEL

ROADTEC RX-400 RX-500 RX-700 RX-900

25.5 (65) 28.3 (72) 22 (56) 47.2 (120)

Hatz Honda Lombardini Perkins

DIMENSIONS FT. (M)

74.5 (189) 143 (363) 122 (309) 99 (251.5) 85 (215.9)

35.5 (90) 64 (162) 87 (221) 36 (91.4) 44 (111.8)

99.4 (252.5)

50 (127)

WIDTH CUT IN. (CM)

ilizers Reclaimer/Stab RS350 RS446C RS600C RS950B

by 2.5) 11.8 by 8.2 (3.61 by 2.6) 36.2 by 8.5 (1 7 by 2.6) 5.

51.6 by 8.50 (1 5.7 by 2.6) 51.6 by 8.50 (16.9 by 2.8) 55.6 by 9.2 (1 9 by 2.8) 55.6 by 9.2 (16.

by 2.5) 25.3 by 8.1 (7.7.2 by 3.1) 30.1 by 10.1 (9.2 by 3.0) 26.8 by 9.9 (8 by 3.0) 26.6 by 9.9 (8.1

n/a n/a 73 (186) 94.9 (241)

27.5 (70) 33 (83) 22 (56) 51.2 (130)

DEPTH CUT IN. (CM)

39.4 (100) 24 (61) 48 (122) 86 (218.5) 86 (218.5) 342.9 or 381) (218.5, 261.6, 0 15 381) or 86, 103, 135 150 (218.5, 261.6, 342.9 or 86, 103, 135 or 75 (190.5) 96 (243.8) 96 (243.8) (304.8) 96 (243.8); 120

EIGHT OPERATING W LBS. (KG)

12 (30) 13 (33) 14 (36) 14 (36)

1.9 or 152.4) (60.9, 91.4, 12 24, 36, 48 or 60 (190.5, 200.6 or 218.4) 75, 79 or 86 (200.6 or 218.4) 79 or 86 381) 18.4, 248.9 or 86, 98 or 150 (2

G DBUIL1 L2DIN A O R X E R TE Deutz D201 DV201 PR165 PR330T PR600 (3 track) PR600 (4 track) PR950 (3 track) PR950 (4 track)

148.5 (377.2) 179.6 (456.2) 122 (310)

87 (221) 92 (233.7) 73 (185.4)

1,800 (30) 1,800 to 2,300 (30 to 38) 1,650 to 2,200 (28 to 37) 4,000 (67) 2940 (49) 2400 (40) n/a 67

2,880/3,360 70 53.3 42

3,300 4,200 2,500 3,300

NEQUIPMENTGUIDE.COM VISIT WWW.CONSTRUCTIO TION LISTINGS. FOR COMPLETE COMPAC

(WxL)

by 2.4) 40.8 by 8 (12.44 by 2.7) 47.3 by 8.7 (14. 1 by 2.7) 52.8 by 8.7 (16.6.7 by 3) 54.9 by 10 (1

3,180 to 3,720 (53 to 62) 2,580 to 3,120 (43 to 52) 1,800 to 2,400 (30 to 40) er Roll Non-Vibratory, Pneumatic Tire

103 (263) 115 (290) 136 (345)

60 (152) 76 (193) 110 (280)

TV-1200

VOLVO

FREQUENCY HZ

INSIDE TURN RADIUS IN. (CM)

WIDTH IN. (CM)

42.9 (109) up to 12 (30.5) up to 12 (30.5) up to 14 (35.6) up to 14 (35.6) up to 15 (38.1) up to 15 (38.1)

up to 16 (40.6) (50.8) up to 20 up to 17 (43.2); (40.6) up to 16 up to 20 (50.8) up to 16 (40.6);

48,600 (22,045)6) 49,859 (22,615. 6) 76,180 (34,554. 6) 92,320 (41,875.

97.6 (248) 21,500 (9,752) 41,500 (18,870) 87,000 (39,462) 90,600 (41,095)5) 90, 620 (41,103) 98,620 (43,73 36,000 (16,329)5) 51,600 (23, 408) 61,880 (29,06 70,500 (31,978)

.COM IPMENTGUIDE U Q E N IO T C U R ONST LISTINGS. VISIT WWW.C D PROFILERS N A S R E H IS IN E MILLERS, F FOR COMPLET

ENGINE HP (kW) 325 (242) 630 (470) 700 (522) 950 (708) 0 (53 3,180 to 3,72 25) 165 (1 330 (246) 600 (447) 600 (447) 950 (708) 950 (708)

to 62)

350 (261) 415 (309) 600 (448) 950 (730)

Construction Equipment Guide • Paving, Compaction & Milling Section • www.constructionequipmentguide.com • April 9, 2011 • Page 39

INDUSTRY SOLUTIONS FOR PROFESSIONALS

BW19 0AD -4 A M

B M 1 30 0 /3 0

78” Intelligent Compaction Roller

51” Wide Milling Machine

BW278 A D -4 A M

M P H 1 2 2- 2

Intelligent Compaction

482 hp Stabilizer / Recycler

BC462EB

BW211D-40

BW284AD

MPH364R-2

High Speed Embankment Compactor

84” Single Drum Compactor

84” Tandem Vibratory Roller

Recycler and Stabilizer

(800) 782-6624

Page 40 • April 9, 2011 • www.constructionequipmentguide.com • Paving, Compaction & Milling Section • Construction Equipment Guide

Mauldin’s 1750-C Super Paver is ready for fast and hard action. Unmatched performance and durability set this heavyweight apart from all others.

M413XT

Check the details at www.4aMauldin.com.

MG622

Precision Spray

Discover More Ways Mauldin Can Help You Become a

Master of the Mat.

Calder Brothers Corporation 250 E. Warehouse Ct. | Taylors, SC 29687

phone: (864) 244-4800 | fax: (864) 244-5007 | www.4aMauldin.com Golden Equipment Company 721 Candelaria NE Albuquerque, NM 87107 (505) 345-7811 (800) 880-8580 1150 Madison Lane Farmington, NM 87401 (505) 326-1413 (866) 293-5237

Construction Equipment Guide • Paving, Compaction & Milling Section • www.constructionequipmentguide.com • April 9, 2011 • Page 41

If you think the articulation joint is solid...

wait to you see the rest!

NorAm 65E | 110 HP | 16,800 LBS | 10' or 12' BLADE Agile and strong, the NorAm 65E is built to perform. The NorAm 65E offers standard features such as a 53" Circle with “A” Frame Drawbar, Full Power Shift Transmission with Torque Converter, and Torque Proportioning Rear Differential, making it the highest resale value in its class. The NorAm 65E...Compact Grader with BIG Grader features.

We put the “Know” in Knowledge when it comes to Compact Motor Graders ARIZONA

CALIFORNIA

NEVADA

TEXAS

EARHART EQUIPMENT www.earhartequipment.com Tucson (520) 889-6396

BEJAC CORPORATION www.bejac.com Escondido (877) 543-3522 Placentia (714) 528-6224

APCO EQUIPMENT www.apcoequipment.com North Las Vegas (702) 871-7474

ANDERSON MACHINERY CO. www.andersonmachinerytexas.com Corpus Christi (361) 289-6043 Manor (512) 272-8133 Pharr (956) 781-5995 San Antonio (210) 661-2366 Victoria (361) 575-8111

COLORADO RIFLE EQUIPMENT www.rifleequipment.com Rifle (970) 625-4507

www.noram65.com

OKLAHOMA OCT EQUIPMENT www.octequipment.com Clinton (580) 323-3422 Oklahoma City (405) 789-6812 Tulsa (918) 437-5085

HOLT CAT www.holtcat.com Dallas (214) 342-6700 Ft. Worth (817) 847-8880 Irving (214) 342-6700 Waco (254) 662-7377 MUSTANG CAT www.mustangcat.com Houston 713-460-2000 Beaumont 409-892-8412

Bryan 979-775-7368 Bryan 979-775-0639 Channelview 281-452-7368 Conroe 936-756-1110 El Campo 979-543-3389 Freeport 979-233-7368 Houston 713-462-9993 Houston 713-228-7368 LaMarque 409-935-7000

Lufkin 936-639-5551 Lufkin 936-632-6775 Nederland 409-722-7368

Odessa 800-658-9888 San Angelo 800-658-9130 Wichita Falls 877-658-9877

YELLOWHOUSE MACHINERY CO. www.yellowhouse.us Abilene 800-592-4468 Amarillo 800-658-9868 Lubbock 800-658-9878

Built from a lineage of market leaders for over 60 years

Made in the USA

Page 42 • April 9, 2011 • www.constructionequipmentguide.com • Paving, Compaction & Milling Section • Construction Equipment Guide

3517 Wayne White Rd., Climax, NC 27233

866-430-7539

jfwequip@aol.com www.jfwequipment.com

1986 Hyster/Hypac C530A Pneumatic 9 Wheel Rubber Tire Roller, Perkins diesel engine, water system

Leeboy 400 Roller, Lombardini 37 hp diesel engine, split drum roller, 40” front drum, 44” back drum, vibratory on back drum

1992 Etnyre Tanker 6750 gallons, propane heat

1999 Blaw Knox PF 4410 Track Paver, Omni IA screed 8-13’, Cummins diesel engine

2009 Etnyre Centennial 2000 Gallon Distributor, Computer w/1’ cut-offs, diesel heat, Freightliner w/Mercedes diesel, 6 spd trans, 2 spd axle, air brakes, low miles

2005 Midland SPD-8 Road Widener, dual discharge, hydrostatic drive, John Deere diesel engine, 2-3’ hyd ext

1996 Rosco SPRH-H Chip Spreader, Cummins diesel engine, 11’ spread hopper, hydrostatic drive

1982 Athey 7-12D Force Feed Loader, John Deere diesel engine, enclosed cab, 30’ conveyor, hydrostatic drive, brand new tires on back

2001 Blaw Knox PF 3200 Paver, Cummins diesel engine, Omni IIIA screed 10-18’, power crown & slope

Serving Serving the the Asphalt Asphalt Industry Industry for for 25 25 Years Years

BEE EQUIPMENT SALES, LTD 2506 Slaton Highway • Lubbock TX, 79404 806/745-1511 • Fax: 806/745-1542

Construction Equipment Guide • Paving, Compaction & Milling Section • www.constructionequipmentguide.com • April 9, 2011 • Page 43

Highway-Class Asphalt Pavers Dynapac Tracked and Wheeled Pavers — F1000T (tracked) and F1000W (wheeled) pavers GHVLJQHG VSHFL¿FDOO\ IRU WKH 1RUUWWK $PHULFDQ PDUNHW and built in the USA. ‡ IRRW ZLGH SDYHU ZLWK H[WHQGDEOH IURQW or rear mount screeds ‡ +LJK SHUIRUPDQFH RXWERDUG DXJHU GULYH DQG high-capacityy slat conveyor system that eliminates center line segregation ‡ +LJK FDSDFLW\ KRSSHU ZLWK ORZ GXPS KHLJKW ‡ 3RZHUUIIXO .Z JHQHUDWRU SURYLGHV IXOO VFUHHG KHDWLQJ FDSDFLW\ DW LGOH DQG SOHQW\ RI FDSDFLW\ WR run lights at night ‡ &XPPLQV 7LHU ,,, GLHVHO HQJLQH KS DW USP ‡ 5HGXQGDQW RSHUDWLQJ V\VWHPV DQG EDFNXS RQERDUG drive controller so you keep paving ‡ 'XDO VZLQJ RXW RSHUDWRU VWDWLRQV WKDW SURYLGH D FOHDU YLHZ RI KRSSHU DXJHUV DQG ZRUN DUHD Built for maximum performance, ease of maintenance and low total cost of ownership. We call it Uptime by Design.

Authorized Dynapac Dealers American Machinery

CL Boyd

Colorado Machinery

R.B. Everett & Co.

Pape Machinery,, Inc., cnt’d.

+RQROXOX +, 808.682.8282 +LOR +, 808.961.6673 .RQD +,

0DXL +,

.DXDL +,

$UGPRUH 2.

866.720.2693 2NODKRPD &LW\ 2.

/DZWRQ 2.

800.633.2693

Colorado Springs, CO

Pueblo W West, est, CO

Frederick, CO 303.833.5900 Fort Collins, CO

3DVDGHQD 7; 281.991.8161

3RUWODQG 25 503.289.1103 7DQJHQW 25

(XJHQH 25

&HQWUDO 3RLQW 25

.ODPDWK )DOOV 25

%HQG 25

.HQW :$

Mt. Vernon, W WA A

Tacoma, W WA A 253.922.8718 .HOVR :$ 360.575.9959 Wentachee, W WA A

Yakima, W WA A

Cate Equipment Co.

'DOODV 7;

7\OHU 7;

)RUW :RUWK 7;

%RLVH ,'

3RFDWHOOR ,' 208.232.7001 /DV 9HJDV 19

Salt Lake City, UT 801.973.2900 Gillette, WY 307.682.0571

Bee Equipment Sales, Inc.

Closner Equipment Co. Inc.

/XEERFN 7;

6DQ $QWRQLR 7; 210.732.2131 $XVWLQ 7; 512.272.8200

Bane Machinery

Bejac Corporation Los Angeles, CA 800.77.BEJAC 6DQ 'LHJR &$ %(-$&

Dynapac USA

3700 East 68th Avenue Commerce City, CO 80022

Phone: 800-732-6762 Fax: 303-288-8828 www.dynapac.us

Craig T Taylor aylor Equip. Co. $QFKRUDJH $.

907.276.5050 :DVLOOD $.

907.376.3838 6ROGRWQD $.

907.262.5977 )DLUEDQNV $.

Doggett Heavy Machinery Services 9LFWRULD 7; 361.570.6666 &RUSXV &KULVWL 7; 361.289.0727 %URZQVYLOOH 7; 956.831.9377 3KDUU 7; 956.787.0001

Modern Machinery Missoula, MT 800.332.1617 .D DOLVSHOO 07

Billings, MT 800.735.2589

Pape Machinery, Inc. 6SDUNV 19

Fowler, CA

1HZDUN &$ 510.790.3600 5RKQHUW 3DUN &$

Gilroy, CA

French Camp, CA 209.983.8122 Sacramento, CA 916.922.7181 5HGGLQJ &$

Rowand Machinery Co. Spokane, WA WA 509.838.5252 Pasco, WA WA

+D\GHQ ,' 208.762.2657

Tom Growney Equip., Inc. (O 3DVR 7; 915.598.1133 $OEXTXHUTXH 10

)DUPLQJWRQ 10 505.326.1101 +REEV 10 505.392.6923

Wyoming Equipment Cheyenne, WY 307.638.8669

Atlas Copco Tuscon Store

Page 44 • April 9, 2011 • www.constructionequipmentguide.com • Paving, Compaction & Milling Section • Construction Equipment Guide

Bomag Americas Launches BW 900-50 Roller at ConExpo Bomag Americas Inc. launched its BW 900-50 at the 2011 ConExpo Show in Las Vegas.

This newest generation 1-1.5 ton (1.3 t) ride on roller is powered with the Honda GX630 gasoline engine. With a working width of 35.4 in. (90 cm) and an overall width of 37.8 in. (96 cm) the machine is practical for both small compaction applications and larger commercial job sites. A compact design allows the user full operation advantages in restricted areas with tight space clearances, according to the manufacturer.

The powerful front drum vibration delivers 3,395 lbs (15.1 kN), 4,200 vpm (70 Hz) and 0.020 in. (.05 cm) amplitude to ensure the required compaction is met for asphalt as well as sub-base materials. A large 36 gal.

(137 L) water tank and a pressurized water sprinkler system with interval flow timer suit the BW 900- 50 for use on a variety of asphalt applications. The water system is filtered for protection and incorporates an easy This newest generation 1-1.5 ton (1.3 t) ride on roller is powered with the Honda drain function for time savings.

GX630 gasoline engine.

Two flexible scrapers per drum, an articuge 38 Charts from pa

WEIGHT LBS. (KG)

ENGINE TYPE

MODEL

GOMACO.83 by 8.17 (12.44 by 2.49) 40 RX-400 II r de an m Com 4T Commander IIICurb Cadet pform GT-6300-4T Sli GP-2400-4T

GEHL 1448 Plus 1648 Plus

ROADTEC RP 175

Cummins John Deere Vanguard Cummins Caterpillar

6, 91 or 122) 26, 36 or 48 (6 ,000) 20,000 (9 0) 33,400 (15,15 ) 2,650 (1,200 0) 28,500 (12,70 0) 50,000 (22,68

7,775 (3,527) ) 10,600 (4,808

8 Yanmar 3TNV8 8 V8 N 4T ar nm Ya

0) 33,220 (14,60

Cat

D PAVING SPEE ) FPM (MPM

12 (30) n/a n/a n/a n/a n/a

8 (2.44) 8 (2.44) —

325 (242) 8 (2.4) 16 (4.9) 1 (0.3) 12 (3.7) 24 (7.3)

48,600 (22,045) 30.8 (9.3) 33 (10) 50 (15.24) 28 (8.5) 44 (13.5)

12 (3.67) 13 (3.96)

80 (24.4) 130 (39.6)

15.5 (4.7)

200 (60)

20 (6.1) max 30 (9.1) max

ING

ADBUILD TEREX RO Asphalt CR352L CR562 Concrete (Slipform) SF2204C HVW r) (Automatic Rolle

SCREED SIZE FT. (M)

H PAVING WIDT FT. (M)

Cummins, diesel Cummins, diesel Cat, diesel

400 (122) ed ch or VersaScre reed 175 (53) sta Fa , 16 h etc ch or VersaSc 6) 8 (2.4): Str 31,870 (14,45 1)10 (3.05): Stretch 20, Fasta 44,315 (20,10 22 (6.7) um 8.3 (2.5) minim 0) 53,000 (24,04

ENT

CTIONEQUIPM

ONSTRU VISIT WWW.C

R COMPLETE GUIDE.COM FO

20 (6.1) max

.

GS PAVING LISTIN

lating and oscillating center joint, and chamfered edge drums prevent surface marks on asphalt. Individual indicator lights and an hour meter display all main roller functions to the operator. Quick and simple maintenance is aided by accessible fluid drain ports.

Safe and easy loading and unloading is possible with a single central lifting point or four corner lifting points. Two additional large tie down points located at the front and back of the machine secure the machine while transporting.

For loading and driving on slopes, the mechanical parking brake ensures safe operation. The BW 900-50 is equipped standard with essential safety features like the foldable ROPS, retractable seat belt, back-up alarm and an emergency stop button. A lockable engine hood and the dash board with integrated theft control protect the roller against vandalism. Working lights are an available option to assist with safe night operation.

For more information, call 309/853-3571 or visit www.gobomag.com.

CITY

HOPPER CAPA TONS (T)

n/a n/a n/a n/a

4 (4.06) 6 (6.09) 10 (9)

10.0 (9.07) 16.7 (15) n/a

Construction Equipment Guide • Paving, Compaction & Milling Section • www.constructionequipmentguide.com • April 9, 2011 • Page 45

RDO EQUIPMENT Riverside, CA 800/494-4863 Indio, CA 760/342-8900 Poway, CA 800/905-1150 Imperial, CA 800/464-4331 Fort Worth, TX 800/551-4905 Hewitt, TX 800/551-8258 Irving, TX 800/437-6342 Laredo, TX 956/718-1909 Pflugerville, TX 512/272-4141 New Braunfels, TX 800/880-0880 Ehrenberg, AZ 928/923-9611

EXACTCOMPACT HELPS SPEED COMPACTION BY MONITORING IMPACT SPACING Take a high-frequency Sakai roller and you can speed compaction. With EXACTCOMPACT, you can be sure that you’re rolling at the precise impact spacing.

EXACTCOMPACT is a simple visual monitor: Red = You’re rolling too fast.

Yellow = You’re rolling too slow. Green = You’re right on target to reach density at the fastest possible ground speed. EXACTCOMPACT is standard on mainline Sakai rollers – optional on all others. Put it to work on your next HMA job.

Phoenix, AZ 602/415-4700

www.sakaiamerica.com | 1-800-323-0535

FOUR SEASONS EQUIPMENT 8111 Mills Road Houston, TX 77064 281/807-9777 Fax: 281/807-1233

Flagstaff, AZ 928/526-0639

1425 Swisco Road Lake Charles, LA 70665 337/626-6000 Fax: 337/626-7600

Prescott, AZ 928/776-8300 Tucson, AZ 520/294-5262 Wellton, AZ 928/785-4276 Yuma, AZ 928/341-7100

Page 46 • April 9, 2011 • www.constructionequipmentguide.com • Paving, Compaction & Milling Section • Construction Equipment Guide

ADM Adds Asphalt System to Plants

it’s not ’s fault

The Worldwide Leader in Concrete Paving Technology

by TheShelterPetProject.org

800-831-2320 ❘ www.gomaco.com CONCRETE STREETS AND HIGHWAYS ❘ AIRPORT RUNWAYS ❘ CURB AND GUTTER ❘ SIDEWALKS RECREATIONAL TRAILS ❘ SAFETY BARRIER ❘ BRIDGE PARAPET ❘ BRIDGE DECKS ❘ IRRIGATION CANALS GOMACO CORPORATION IN IDA GROVE, IOWA, USA

KIRBY-SMITH MACHINERY, INC. www.kirby-smith.com

OKLAHOMA CITY, OK 6715 W. Reno Ph: 405-495-7820 Fax: 405-787-5973

TULSA, OK 12321 E. Pine St. Ph: 918-438-1700 Fax: 918-437-7065

(770) 554-2400 er Call for the deal Toll Free: (877) 218-3240 nearest you.

Fax: (770) 554-6540

509 Plantation Dr. • Loganville, GA 30052 email: sales@puckett-equipment.com

Expect the Best in Quality, Simplicity & Dependability

580 ASPHA LT PAVER

tions: SpecificaHopper

Feet 6-1/2 Ton - 8 to 13 th id W g vin l Engine Basic Pa Hp Diese 6 4 r o 8 3

Please visit our website for additional specifications and information on our Models 540 and 560

www.puckett-equipment.com

Asphalt Drum Asphalt Drum Mixers Inc.has Mixers Inc. added a warm-mix asphalt (ADM) has system to its Milemaker added a warm- Series asphalt plants. mix asphalt system to its Milemaker Series asphalt plants. The new system delivers more versatility to the plants, which is among the most fuel-efficient, mixdesign flexible and productive plants within the 160 to 425 tons-per-hour (145 to 385 t) range, according to the manufacturer.

Previously producing only hot-mix asphalt designs, the Milemaker now has the capability to introduce water or other chemicals into liquid asphalt entering the plant, thereby appropriately lowering the temperature to warm-mix specifications.

The dual-drum plants use counterflow technology, which operates separate drying and mixing zones to achieve the maximum level of heat transfer and fuel efficiency. This enables the Milemaker to achieve a high production volume and a low cost-per-ton average.

Milemaker plants, which are available in portable, relocatable or stationary versions, meet all federal and state specifications and produce quality asphalt to help protect operators against out-of-spec damages. While producing the latest mix designs, the plants also come prepared for future job specifications since dual-drum systems easily can be adapted to accommodate new mix specifications.

A wide range of components further customizes each plant for particular customer needs. Available individual components include cold feed bins, hot oil asphalt cement tanks (both horizontal and vertical), direct-fired horizontal cement tanks, portable and stationary bag houses, mineral filler systems, recycled asphalt pavement systems, self-erect and stationary silos, weigh and drag conveyors, weigh batchers and fuel oil tanks.

ADM keeps the environment a priority in its designs. By using counter flow technology, the Milemaker reduces unsafe hydrocarbon emissions, which are a common problem with drum mix plants. The Milemaker produces clean stack tests and also can handle large percentages of recycled asphalt pavement (RAP) without reducing the temperature or producing blue smoke. To make the Milemaker Series even more environmentally friendly, ADM designed the system to reintroduce residual gases back to the drum’s combustion zone, according to the manufacturer.

The Milemaker’s design features a technically easy-tooperate control system, which can be controlled by one plant operator and one loader operator. A new operator can be trained within a few hours, and on-site staff will be able to handle nearly all maintenance procedures.

In addition to the Milemaker, ADM also offers the Roadbuilder Series and SPL Series. Each ADM plant can be custom designed to meet the requirements of individual sites, essentially building each client’s business based upon the components and plant size needed.

For more information, call 260/637-5729, or visit www.admasphaltplants.com.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 9, 2011 • Page 47

CONEXPO-CON/AGG 2011

CONEXPO from page 14

(L-R): Dan Blade, Frank Priddy and Steve Green of HiWay Equipment are ready to help greet customers at the Case booth.

Dave Martin (L), LBX, has been discussing sales techniques for the 250 X3 excavator with Steve Schweigert of Bejac Corporation, the California LBX dealer.

(L-R): Seydel Jarquinn, Midco Demolition Tool of Dallas, Texas, and Chris Spainhour, Solida in Granbury, Texas, discuss hydraulic hammers and Solida tools with Ryan McDonald, McDonald Excavating Inc., and Mike Green, Green Construction Inc., both of Washougel, Wash.

Casey Reed (L) of MB America Inc. takes a photo op with Dana Warren of T.W. Excavating & Development of Rowley, Mont., and the MB-S23 crusher.

(L-R): Paul Ebersele, Ditch Witch; Kevin Hass and Wyatt Allen of Western Foundation and Shoring Inc. in San Diego have been discussing the attributes of the Ditch Witch JT 100 trencher.

(L-R): Buddy Shandy and George Denny, Kirby-Smith Machinery in Oklahoma and North Texas, discuss the Vogele Vision 5200-2 paver with Rick Nichols of Team Fishel in Roanoke, Texas.

Eddie Gilmore (L) of Summit Truck Equipment takes a photo op with one of his company’s custom service trucks and Michael Morton of Essex Crane Rental Co. in Buffalo Grove, Ill.

(L-R): Brothers, Dave and Rob Desjardins of Desjardins Contracting Ltd. in Kelowna, B.C., speak with Kevin Loomis of Chicago Pneumatic about the RX 53 hydraulic hammer.

(L-R): Darin Ofstie of Precision Excavating, in Baldwin, Wis., and Dean Schilling of Extreme Seal Coating & Supply, in Lakeside, Colo., speak with Troy Dodson about RoadHog Inc.’s milling attachments.

Jon Linstruth (R) of ASCO in Austin, Texas, dropped by the CEG booth to grab a photo op with his Western representative, Dale Agnew.

(L-R): Jeremy and Joe Jensen of Aggregate Machinery Inc. in Salem, Ore., have just been discussing the Raptor XL 500 cone crusher with Jerrod Dulmes of FLSmidth.

Page 48 • April 9, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CLASSIFIEDS Asphalt Cutters

2003 John Deere 650H LGP, cab, A/C, U/C, just turned, fresh paint, very good condition, 4521 hrs...$48,500.

EXTREME SERVICE ASPHALT CUTTERS

JDE Equipment Co. 616/530-2000

ï 24 Hour Shipping ï 14 Models: Excavators, Loaders, Graders, Skid Steers ï Parts for All Competitor Models ï Spring Blowout Special up to 40% off

2007 John Deere 450J, LGP, ROPS, hydro trans., 124'' 6way blade, very good condition, 1072 hours .................$57,375.

2005 John Deere 650J, LGP, ROPS, hydro trans., 128'' screen and sweeps, good condition, 1806.................$57,800.

ASPHALT EQUIPMENT

Attachments International Call Martin Phillips 702-234-4323 attintl@loretel.net www.attachmentsintl.com

Industrial Tractor Co. Inc. 843-572-0400

Classified Rates:30 Words or Less for $30.00. Each Additional Word is 95¢.

For just an additional $20 your ad can be posted on our online searchable database for 30 days Ad runs for 2 (two) insertions - no changes in second insertion.

PLEASE ENCLOSE PAYMENT WITH ORDER and mail to - 470 Maryland Drive• Fort Washington, PA 19034

215/885-2900 • Fax 215/885-2910 • Toll Free 1-800/523-2200 RENTALS

Misc. Landscape Equip.

Rental

Gehl Skid Steer Loaders, Excavators, Track Loaders, Attachments!

Construction & Industrial Equipment Rentals

Rent or Purchase Norris Sales Company 610/279-5777

Track Loaders Backhoe Loaders

ATTACHMENTS

2006 John Deere 650J, s/n T0650JX130978, 5 in stock, 1648, hours................$59,000.

2000 John Deere 650H, s/n 882786, 660 hours.....$30,000.

1988 JCB 1550, very good condition, runs well, tight 4x4, ext. dig, cab w/heat, 18'' bucket, 3525 hours...$18,750.

Shears

Stafford 229-300-9266

JDE Equipment Co. 616/530-2000

2008 Genesis LXP200, s/n 22019............................$79,00.

EXCAVATORS

Stafford 229-300-9266

Hydraulic Excavators

Crane Inspections

2006 Link Belt 130LX, Stock s/n K1J618579, 3 to choose from, 257 hours...................$69,000.

2007 Kobelco SK250, Stock s/n LL09U1412, 2 to choose from, 716 hours.................$109,000.

2007 Kobelco SK210-8, s/n YQ09U3326, 3 in stock, 529 hours...........................$97,000.

2006 Hyundai 140, s/n N40612238, 831 hours ....................................$49,000.

2007 Link Belt 210X2, s/n EHCJ72624, 525 hours ....................................$95,000.

2007 Link Belt 330LX EX, s/n K6J73110, 2 to choose from, 3219 hours................$109,000.

2006 Link Belt 460LX, s/n K7J60995, 3106 hours ...........................$145,000.

2007 John Deere 310J, ROPS, turbo, 4x4, GP loader, 24'' bucket, very good condition, 71 hours...........................$58,635.

2007 John Deere 310J, ROPS, 4x4, power S trans., GP front bucket, 24'' BH bucket, very good condition, 55 hours...........................$57,200.

2009 John Deere 310SJ, ROPS, turbo, 4x4, PS trans., P controls, ext. hoe, GP loader bucket, 24'' BH bucket, excellent condition, 38 hours. ....................................$73,700.

2006 John Deere 310SG, ROPS, turbo, 4x4, PS trans, P control, ext. hoe, GP bucket, 24'' BH bucket, excellent condition, 384 hours..........$57,300.

2004 John Deere 410G, ROPS, 4x4, turbo, P controls, PS trans, ext. hoe, GP bucket, 24'' BH bucket, good condition, 2862 hours.................. $3 9,5 00 .

Specializing in Truck Mounted Cranes

Stafford 229-386-9472

Industrial Tractor Co. Inc. 843-572-0400

NH Construction Equipment New & Used Parts & Service

Crawler Loaders

COMPACTION EQUIP. Misc. Compaction Equip.

2006 Bomag BW177PDH Stock # T000752, s/n 90158156116, 4 to choose from, 407 hrs..............................$42,000.

2008 Bomag BW141AD4, s/n 101920071002, 109 hours . . . . . . . . . . . . . . . . . . . . . . . . $ 6 5 , 0 00 .

Stafford 229-386-9472

CRANES

Modern Equipment Sales & Rental 800/445-4381

CRAWLER TRACTORS Crawler Tractor 2006 John Deere 650J, s/n T0650JX130978, 5 in stock, 1648, hours................$59,000.

2000 John Deere 650H, s/n 882786, 660 hours.....$30,000.

Stafford 229-300-9266

Modern Equipment Sales & Rental 800-445-4381

GENERATORS Generators & Gen Sets

Daily - Weekly - Monthly & Long Term Rentals Available

LANDSCAPE EQUIP.

2006 Liebherr 622B, s/n 3928627, 2355 hrs....$59,000.

Stafford 229-386-9472

PARTS Crane Parts

For Sale or Rent All Makes and Models

TEREX PARTS

Modern Equipment Sales & Rental 800/445-4381

Modern Equipment Sales & Rental 800/445-4381

Compaction, Excavating, High Lifts, Traffic Control, Safety, Loaders, Landscaping

Stone, Wacker, Honda, Gehl, JLG to name a few .....

Norris Sales Company 610/279-5777

Operator Training

Stone, Wacker, MBW, Diamond Products, Honda, IR, AGL, Sky Trak, JLG, JoBox, DeWalt, Stihl, Imer

Are your operators compliant with Federal Standards, OSHA, ANSI, ISO?

Mon-Fri 6:30 am - 5:00 pm Sat 7:00 am - 12:30 pm Norris Sales Company 610/279-5777 Construction & Equpment & Supplies for the "Professionals"

TRUCKS Bucket Trucks

TRAINING

Norris Sales Company 610/279-5777

Rentals, Sales, Service

For information, pricing or reservations: Call 1-800-223-3827 www.moderngroup.com All prices include Trainer, travel and material NO HIDDEN COSTS

MODERN GROUP offers training for: - Front-end Loaders & Backhoes - Aerial work platforms (AWP) (Boom & Scissor Lifts) - Rough Terrain Forklifts (Gradall, Lull, JCB) - Skid Steer Loaders

ELLIOTT BUCKET TRUCKS Modern Equipment Sales & Rental 800/445-4381

Get the latest news online.

Visit CEG’s Web Site at www.construction equipmentguide.com

The Easy Way To Advertise Your Equipment Valued At Less Than $1 Million Run In Two Consecutive Issues For $95

SEE YOUR BARGAIN AD IN COLOR.

2011 EZ Screen 550, Works with 1 Yard Loader or 96” Bucket, Excellent 5’x4’ Vibratory Screenbox! Ideal for site cleanups. One man = 50 yards a day+. Talk to the folks that own them. 2 Year warranty. This will be the fastest payback of ANY machine you’ve ever bought. . . . . . . . . . . . . . . . . . . . . . NEW $9,500 plus freight.

Other Screens Available www.ez-screen.com • 866-745-5828 8 EB

ONLY $50 EXTRA FOR 2 INSERTIONS

Here's how the BARGAIN ADS Work: • Supply us with a photo of a machine (One machine per Ad) and a maximum 20 word description plus contact and phone number.

• Either email your copy & photo to production@cegltd.com or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034.

• Cost is $95 per ad. $50 additional for color.

• The ad will run for two consecutive issues in one region.

For more information, call Construction Equipment Guide today at

800/523-2200

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 9, 2011 • Page 49

Attention Contractors!

Post Your Wanted To Buy Listings FREE! Here’s How! List Your Wanted Items

If you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted and enter your listings.

NEED TO BUY FROM USER BULLDOZER D3 A D10 CONTACT: JEAN MAURICE BOUTIN PHONE: 1-450-346-8975 EMAIL: JEANMAURICEBOUTIN@ BULLDOZERJM.COM –––––––––––––––––––––––––––––––– CASE 580 LOADER BACKHOES • CASE 580-E K L SL M & SMS CONTACT: FRANK @ TRICO EQUIPMENT PHONE: 800-654-USED (8733) EXT. 1230 FAX: 856-697-4842 EMAIL: FHORAN@TRICOEQUIPMENT.COM –––––––––––––––––––––––––––––––– PORTABLE JAW CRUSHER 36/48 OR 40/48 • GOOD CONDITION WORK READY CONTACT: RICHARD PHONE: 603-828-6100 EMAIL: CMISOLD@COMCAST.NET –––––––––––––––––––––––––––––––– CAT 966C | NEED 966C UNIT READY TO WORK TO BE SHIP OVERSEAS. CONTACT: OSAMA ABBAS EMAIL: ABBASOSAMA@HOTMAIL.COM –––––––––––––––––––––––––––––––– 9FT11IN STICK FOR CAT 345 BL CONTACT: MATT BUSH THERUHLIN COMPANY PHONE: 330-239-2800 FAX: 330-239-1845 EMAIL: MBUSH@RUHLIN.COM –––––––––––––––––––––––––––––––– BARNES 30MU PUMP BODY • PUMP BODY OR COMPLETE UNIT CONTACT: RICHIE EMAIL: RFH3@CITLINK.NET –––––––––––––––––––––––––––––––– WE NEED CATERPILLAR WHEEL LOADERS 950B, 950E, 966F, 966FII, IF YOU HAVE ANY AVAILABLE UNIT FOR SALE, PLEASE INFORM ME. CONTACT: HIDAYAT KHAN PHONE: 345-881-8803 EMAIL: NAQIB_KHANINTRCO@HOTMAIL.COM –––––––––––––––––––––––––––––––– DYNAPAC CA251D,CA251PD | WE NEED TO BUY DYNAPAC ROLLERS / PACKERS CA251D & CA251PD, IF AVAILABLE FOR SALE PLEASE INFORM ME. CONTACT: NAQIB KHAN PHONE: 333-329-8751 EMAIL: NAQIB_KHAN73@YAHOO.COM –––––––––––––––––––––––––––––––– SKID STEER | TIME TO UPDATE MY 1840 I WANT SOMETHING WITH AUG.HYD.WITH 50+HP CONTACT: ERIC PHONE: 847 909 7845 EMAIL: ECA567@ATT.NET –––––––––––––––––––––––––––––––– NEED TO BUY BULLDOZER D11N OR D11R WITH RIPPER RUN FOR THE PRICE I PAY UNDER UNDER 100,000 CONTACT: JEAN MAURICE BOUTIN PHONE: 1 450 346 8975 EMAIL: JEANMAURICEBOUTIN@BULLDOZERJM.COM ––––––––––––––––––––––––––––––––

KOMATSU WA 200 2005/ OR NEWER | AIR CAB, COUPLER A PLUS, JOB READY 2000 HOURS +/CONTACT: RICHARD PHONE: 603 828-6100 EMAIL: CMISOLD@COMCAST.NET –––––––––––––––––––––––––––––––– VALMET | I AM LOOKING FOR PARTS TO FIT A VALMET 342 WHEEL LOADER, SPECIFICALLY SOME WORKING BRAKE CYLINDERS /ACTUATOR FRONT AND OR REAR. CONTACT: MICHAEL MALONEY EMAIL: MICHAELMALONEY@ATT.NET –––––––––––––––––––––––––––––––– A JOB TRAILER, OFFICE TRAILER CONTACT: EZRA MARTIN PHONE: 717-615-8315 FAX: 717-445-4468 EMAIL: EZRAMARTIN@EMYPEOPLE.NET –––––––––––––––––––––––––––––––– LORAIN MC7120 BOOM SECTIONS | D17 65" X 65" SQUARE BOOMS - NEED ONE 20 SECTION- NEED ONE 30 SECTION. NEW ENGLAND/NEW YORK TRISTATE. CONTACT: CAROL NIELSON PHONE: 203-380-8300 FAX: 203-380-8944 EMAIL: CNIELSON@DEMOLITIONSERVICES.COM –––––––––––––––––––––––––––––––– VOLVO EC35 | CAB / AC CONTACT: MICK PHONE: 352-527-0072 EMAIL: INFO@FIELDCO.BIZ –––––––––––––––––––––––––––––––– MIXER MACHINE WITH LIFT CONTACT: AJAYAN PHONE: 944-666-3808 EMAIL: AJAYANVASTHU@GMAIL.COM –––––––––––––––––––––––––––––––– EXCAVATOR CAT330BL | PLEASE AM LOOKING FOR EXCAVATOR 330BL USED MACHINE HOURS NOT MORE THAN 6000HRS. CONTACT: ROCKIAH.ENTERPRISE EMAIL: WAJESTO@YAHOO.COM –––––––––––––––––––––––––––––––– EXCAVATOR COUPLER | EXCAVATOR COUPLER TO FIT JOHN DEERE 790E CONTACT: BOB MILLER PHONE: 641-982-4907 FAX: 641-982-4907 EMAIL: RJMILLER@OMNITELCOM.COM –––––––––––––––––––––––––––––––– COLD PLANER /MILL /GRINDER | LOOKING FOR 18" OR 24" HIGH FLOW ATTACHMENT FOR SKID STEER CONTACT: JAMES MANN PHONE: 1-404-273-9424 FAX: 1-770-306-2962 EMAIL: JAMES2525@MSN.COM –––––––––––––––––––––––––––––––– NEED TO BUY D7G AND D8K WITH RIPPER USER FAST STRAIGHT BLADE USER CONTACT: JEAN MAURICE BOUTIN PHONE: 1 450 346 8975 EMAIL: JEANMAURICEBOUTIN@ BULLDOZERJM.COM ––––––––––––––––––––––––––––––––

CLARK RANGER 667 WINCH TYPE SKIDDER • GOOD CONDITION OLDER SKIDDER CONTACT: RICHARD PHONE: 603 828-6100 EMAIL: CMISOLD@COMCAST.NET –––––––––––––––––––––––––––––––– 7800 7810 GEHL OR 2109 MUSTANG • FOOT CONTROLS CAB WITH HEAT AIR!!!! LESS THAN 2000 HRS 20000 OR LESS FOOT CONTROLS CAB HEAT HIGH FLOW??? UNDER 2000 HRS 20000 OR LESS CONTACT: GIL SODAWASSER PHONE: 701 320 0259 EMAIL: GSPLAYME@GMAIL.COM –––––––––––––––––––––––––––––––– D6H DOZER CONTACT: ARDONNA WEAVER PHONE: 574-536-0763 FAX: 574-831-2914 EMAIL: AWEAVER@ BEERANDSLABAUGH.COM –––––––––––––––––––––––––––––––– CAT 3408 ENGINE CONTACT: WILLIE PHONE: 201-786-3354 FAX: 201-444-6377 EMAIL: WKIRCH@OPTONLINE.NET –––––––––––––––––––––––––––––––– TAKEUCHI EXCAVATORS TRACK LOADERS • I BUY TAKEUCHI TRACK LOADERS AND EXCAVATORS ALL CONTACT: PAUL MADSEN PHONE: 407-468-1070 FAX: 321-445-9851 EMAIL: CFLRESALE@GMAIL.COM –––––––––––––––––––––––––––––––– ACKERMAN H10B | USED TRACKS 40% BUSHINGS NOT LOOSE IN RAILS CONTACT: DEAN STRUBE PHONE: C 262-719-1276 • S 262-251-4830 EMAIL: DEANBONS@WI.RR.COM –––––––––––––––––––––––––––––––– PC200LC7, PC220LC7, PC300LC7, 950B, 950E,966D,966E & 966F I, II • WE NEED ABOVE MENTION UNITS ONLY FROM WHOLESALERS & CONTRACTORS-USA ONLY. THANKS CONTACT: MARK EMAIL: VANSEQUIP@GMAIL.COM –––––––––––––––––––––––––––––––– PAD FOOT KIT FOR BOMAG BW177D3 | NEED A PAD FOOT KIT FOR BOMAG BW177D3. MUST BE IN GOOD CONDITION. CONTACT: MIKE SMITH PHONE: 585 538 4395 FAX: 585 538 2467 EMAIL: MSMITH@CALEDONIADIESEL.COM –––––––––––––––––––––––––––––––– 16,000# OR HEAVIER FRONT AXLE FOR 359 PETE • DESCRIBE WHAT YOU WANT. CONTACT: DICK BOHN PHONE: 715-472-2263 EMAIL: BABY33@LAKELAND.WS –––––––––––––––––––––––––––––––– KUBOTA KH28 FRONT IDLER CONTACT: BRUCE BENNETT PHONE: 610 442-7549 EMAIL: BARS324@VERIZON.NET ––––––––––––––––––––––––––––––––

12 FT BLADE FOR D8N DOZER CONTACT: ROD CHRISTENSEN PHONE: 801-498-0659 FAX: 801-489-0959 EMAIL: ROD@FIBERTELINC.NET –––––––––––––––––––––––––––––––– CAT WHEEL LOADERS | CAT 930 OR 950 WHEEL LOADERS 1976 OR NEWER. USA ONLY WHOLESALE PRICES ONLY. CONTACT: DALE PHONE: 360-551-9778 EMAIL: DALE.HEAVYEQUIPMENTHUNTERS@GMAIL.COM –––––––––––––––––––––––––––––––– 950B, 950E & 966F,F2, PC200LC, PC220LC & PC300 | OFFERS ONLY FROM WHOLESALER & CONTRACTORS. THANKS CONTACT: MAR EMAIL: VANSEQUIP@GMAIL.COM –––––––––––––––––––––––––––––––– NEED TO BUY BULL D7G D8K D8N D9N D10N WITH RIPPER EST COTE USER CONTACT: JEAN MAURICE BOUTIN PHONE: 1-450-346-8975 EMAIL: JEANMAURICEBOUTIN@BULLDOZERJM.COM –––––––––––––––––––––––––––––––– PIPE THREADING EQUIPMENT | MOTORIZED PIPE THREADING MOTOR/DRIVER FOR THREADING PIPE PHONE: 616-813-9962 EMAIL: DWKBHEUKER@AOL.COM –––––––––––––––––––––––––––––––– CONSTRUCTION EQUIPMENT | PULL SCRAPERS, VOLVO 35 & 30 ARTICS, BOMAG COMPACTORS, VOLVO & KAWASAKI LOADERS, EX200, PC200’S, MILLING MACHINES. CONTACT: JOHN NEVINS PHONE: 215-441-0336 EMAIL: JNEVINS@JUDECONSTRUCTION.COM –––––––––––––––––––––––––––––––– BOOM TRUCK CONTACT: CHARLIE PHONE: 309-507-1131 FAX: 309-935-6203 EMAIL: AEBLD@GENESE.NET –––––––––––––––––––––––––––––––– JRB QUICK COUPLER TO FIT NEW HOLLAND EH215 EXCAVATOR. CONTACT: KEVIN SHAW PHONE: 815-622-6737 EMAIL: SHAWCONS@ESSEX1.COM –––––––––––––––––––––––––––––––– KOMATSU BR380JG1 | JOB READY 2000 HOURS CONTACT: RICHARD PHONE: 603-828-6100 EMAIL: CMISOLD@COMCAST.NET –––––––––––––––––––––––––––––––– NORAM 65E GRADER WITH CAB | LOOKING TO BUY NEWER UNIT THAN 2001, LOWER HOURS, CAB UNIT CONTACT: LARRY LEISTIKOW PHONE: 608-655-1300 EMAIL: LARRY@BADGERMACHINERY.NET ––––––––––––––––––––––––––––––––

WANT TO TRADE A GRAPPLE WITH 80 MM PINS FOR A GRAPPLE WITH 90MM PINS CONTACT: K SANSALONE PHONE: 856-297-4758 FAX: 856-362-5602 EMAIL: KEVIN@SANSALONEEXCAVATING.COM –––––––––––––––––––––––––––––––– DOZER | DEERE 650J LGP OR CAT D5G LGP WITH CAB. MUST BE A LOW HOUR STRAIGHT, TIGHT MACHINE WITH GOOD UNDERCARRIAGE. MUST BE PRICED RIGHT FOR QUICK SALE. CONTACT: SHANE WELESKE PHONE: 218-843-1022 FAX: 218-843-2172 EMAIL: T1RCRYSTAL@AOL.COM –––––––––––––––––––––––––––––––– KOEHRING 440 CRANE CONTACT: JOHN PHONE: 757-368-5800 FAX: 757-368-5805 EMAIL: HUSSEYMAKER@YAHOO.COM –––––––––––––––––––––––––––––––– 100 20Y3231150 PIN CONTACT: ROBERTO J PALACIOS PHONE: 786-287-7056 FAX: 305-573-7038 EMAIL: CARGOAWAYCORP@LIVE.COM –––––––––––––––––––––––––––––––– WINCH FOR CASE 450C DOZER PTO DRIVEN/LOGGING CONTACT: BENN YELLE PHONE: 906-362-1516 EMAIL: KFINCH510@YAHOO.COM –––––––––––––––––––––––––––––––– FORLIFT 5 TON 3 PCS & FORKLIFT 12 TON 3 PCS • DEAR SIR, WE NEED THE ABOVE MENTION UNITS FORKLIFTS AND TELESCOPIC HANDLERS FROM WHOLESALERS & CONTRACTORS ONLY. CONTACT: MARK EMAIL: VANSEQUIP@GMAIL.COM –––––––––––––––––––––––––––––––– LOOKING FOR DYNAPAC CA251,CA262,CA301,CA302 ROLLERS • SEND DETAILS,PICTURES & YOUR BEST PRICECONTACT: NAQIB KHAN PHONE: +92-333-3298751 EMAIL: NAQIB_KHAN73@YAHOO.COM –––––––––––––––––––––––––––––––– JOHN DEERE MODEL 30 EXCAVATOR CONTACT: LAKE ERIE CONST CO. PHONE: 419-668-3302-X 312 - BILL FAX: 419-663-4324 EMAIL: BILLR@ACCNORWALK.COM –––––––––––––––––––––––––––––––– BUCKET • WE HAVE AN IT24F CAT WHEEL LOADER AND LOOKING FOR A USED BUCKET CONTACT: AL PHONE: 631-586-9582 FAX: 631-586-9588 EMAIL: CUSTOMDESIGN@OPTONLINE.NET –––––––––––––––––––––––––––––––– NEED BULLDOZER D8K WITH RIPPER USER NEAR NEW YORK NICE • NEED 2 CONTACT: JEAN MAURICE BOUTIN PHONE: 1 450-346-8975 EMAIL: JEANMAURICEBOUTIN@ BULLDOZERJM.COM ––––––––––––––––––––––––––––––––

2 CAT 966F I OR II LOADERS • LOOKING FOR 2 LOADERS- HIGH HRS. PLEASE DO NOT SEND BROKERED SPAM MAIL. I NEED GOOD RUNNING MACHINES READY TO WORK. CONTACT: RESOURCE EQUIPMENT PHONE: 1-601-750-0201 EMAIL: JSPENCE@HEAVYEQUIPMENTMS.COM –––––––––––––––––––––––––––––––– TEREX COMMANDER 4200 PARTS • NEED BOTTOM GEAR ASSEMBLY FOR A TEREX TELELECT COMMANDER 4200. THIS IS THE GEAR ASSEMBLY THAT RESTRICTS BOOM SIDE MOVEMENT. CALL FOR PICS AND DETAILS CONTACT: RICK COTTINGHAM PHONE: 757-717-5466 EMAIL: LORDELLESAR@GMAIL.COM –––––––––––––––––––––––––––––––– LOADER BUCKETS WA 250 OR 544 SIDE DUMP & GP • KOMATSU WA 250 OR JD 544 SIDE DUMP AND GP BUCKET, PREFER JRB COUPLER CONTACT: ROGER BECK PHONE: 607-749-7950 FAX: 607-749-5640 EMAIL: BECKEQUI@TWCNY.RR.COM –––––––––––––––––––––––––––––––– 1 BODY PART#56D01-22730 FOR A KOMATSU HM300-2 S/N 2583 ENGINE SAA6D125E-5 S/564463 CONTACT: ROBERTO J PALACIOS PHONE: 786-287-7056 FAX: 305-573-7038 EMAIL: CARGOAWAYCORP@LIVE.COM –––––––––––––––––––––––––––––––– CAT D9N • CAB AIR, CLEAN, NICE MACHINE NEED ASAP CONTACT: RICHARD PHONE: 603 828-6100 EMAIL: CMISOLD@COMCAST.NET –––––––––––––––––––––––––––––––– NEED TO BUY D4G L G P ENC CAB LOW HOURS CONTACT: JEAN MAURICE BOUTIN PHONE: 1 450 346 8975 EMAIL: JEANMAURICEBOUTIN@ BULLDOZERJM.COM –––––––––––––––––––––––––––––––– EAGLE CRUSHER UM15 UM25 OR UM45 BARE UNIT CONTACT: JOE PHONE: 724 944 5569 EMAIL: FJS-1@ATT.NET –––––––––––––––––––––––––––––––– D4H LGP, 28"-30" TRACKS, MINIMUM OF 75%U.C., CAB W/AIR,LOW HOURS 4000-5000 MAX PREFER TO BUY THE MID-WEST CONTACT: KEVIN AYO PHONE: 217-440-5945 EMAIL: AYO1@ADAMS.NET –––––––––––––––––––––––––––––––– ENGINE PRESSURE GROUP • ENGINE PRESSURE TEST KIT. CONTACT: STEPHEN SENAVITIS EMAIL: EARTHMOVER40@ EMBARQMAIL.COM ––––––––––––––––––––––––––––––––

Page 50 • April 9, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

S850 Bobcat Offers Rated Operating Capacity of 3,875 lbs.

Bobcat’s S850 skid steer loader has a rated operating capacity of 3,875 lbs. (1,757 kg).

Bobcat’s S850 skid steer loader has a rated operating capacity (ROC) of 3,875 lbs. (1,757 kg) — 17 percent more than the company’s previous largest skid steer loader, the S330.

The S850 joined the Bobcat MSeries loader line, which includes the S630 and S650 skid steer loaders and the T630, T650 and T870 compact track loaders.

With an operating weight of 10,008 lbs. (4,539 kg), the S850 is now the largest Bobcat skid steer loader. Due to its vertical-style lift arms, it offers lift height of 144 in.

(366 cm). It is powered by a 92-hp (68.6 kW) water-cooled diesel engine.

Production Is Key The S850 has the same increased hydraulic performance as other M-Series loader models, enabling it to efficiently accomplish more work. The standard auxiliary hydraulic flow on the S850 is 23 gal. per minute (87 Lpm) at 3,500 lbs. per sq. in., while an optional high-flow fea-

ture reaches 37 gal. per minute (140 Lpm) for maximum attachment performance.

New job-enhancing features have been added to the optional deluxe instrumentation panel.

Available only on M-Series loaders, the panel monitors key loader functions, while the keyless start helps prevent theft. The new 5-in., full-color LCD screen offers better readability and interaction. Easyto-read virtual sweep gauges allow the operator to quickly read and understand the machine’s performance.

Increased Uptime The S850 is designed to work long hours on demanding job sites, so routine maintenance has been minimized to enhance operator productivity. Simple checks make it easier to perform maintenance correctly at the proper intervals, according to the manufacturer.

Hydraulic quick couplers are mounted directly to the front plate of the lift arm to provide a solid mounting, while quick coupler

hoses run through the loader arms for better protection. A guard bar extends in front of the coupler for added security.

Keeping the loaders cool when working long hours is important in prolonging the service life of the machine. That’s why Bobcat redesigned the cooling system on the M-Series for increased efficiency and higher performance.

The new design also makes it easier to clean out the cooling system, with an oil cooler that swings up, allowing the operator to clean the area between the oil cooler and the radiator.

cab door threshold has been lowered and the overall surface of the door has been increased more than 40 percent to provide improved visibility and make it easier for operators to enter and exit the cab.

Windows on the sides and rear of the cab also have been increased in size to provide more visibility to the tires and to the rear.

The larger top window makes it easier and more comfortable for the operator to see the attachment with the lift arms raised, an advantage when loading trucks or performing other tasks.

Improved Visibility The S850, like other M-Series loader models, features a cab-forward design that not only makes the loader look different, but also moves the operator closer to the attachment and provides visibility in all directions.

Enhanced visibility is provided to the cutting edge of the bucket or the corners of an attachment because of the large cab door. The

Cab Comfort Comfortable operators are more productive, so to create a better working environment, Bobcat increased the size of M-Series loader cabs by 10 percent, redesigned the interior to allow operators to adjust the environment to their individual preferences and improved cab pressurization.

Bobcat M-Series loaders have a

pressurized cab, with a new onepiece seal that goes all the way around the door and fits into a special curved pocket. This minimizes the amount of dirt and dust that might enter the cab, creating more enjoyable working conditions and making it easier to clean, according to the manufacturer.

Noise is another factor affecting operator comfort, and Bobcat reduced the sound level of MSeries loaders by more than 60 percent. New engine mounts improve isolation to decrease vibration and reduce sound levels.

The control levers on both standard controls with power assist, and the optional selectable joystick controls (SJC) move up and down in conjunction with the seat to reduce arm movement and fatigue as the operator controls the machine. The joystick mounts slide forward or backward to adjust to the preference of each individual operator.

For more information, visit www.bobcat.com.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 9, 2011 • Page 51

Rental Fleet Construction Equipment Auction & 2 JOB COMPLETIONS: Cross Road Construction Company & Calhoun Construction Construction Equipment, Forklifts, Support, Aerial Lifts, Trucks & Trailers TUESDAY, APRIL 12 @ 10:00 AM HOUSTON, TEXAS DIRECTIONS: From Bush International Airport: Airport exit on JFK Blvd., take left ramp onto Will Clayton Parkway toward Central Cargo .2 miles.

Continue on Jetero Blvd., continue on McKaughan Rd., left on Viscount Rd., left Mecom Rd. Take ramp onto JFK Blvd. toward Airport exit (I-45)/ Beltway 8/ Hardy Toll Rd. 2 miles. Take ramp onto Hardy Toll W toward Hardy Toll Rd. (tolls) for 2.9 miles. Take Hardy Toll Rd. North/ Woodlands exit onto Hardy Toll N (tolls) – 11.9 miles. Merge onto I-45 N for 8.4 miles. Exit #81/ Magnolia (FM-1488) toward Magnolia (I-45 S)/ Hempstead .3 miles. Take ramp onto I45 S .2 miles, take ramp onto FM 1488 Rd. (FM-1488) toward I-45 N/ Sherbrook Dr. .3 miles. Take ramp onto North Fwy toward I-45 N .2 miles. Take ramp onto FM 1488 Rd. (FM-1488) toward Magnolia (I-45S) Hempstead for 8 miles. Site is on left. Address: 8215 FM 1488, Magnolia, TX 77354.

NOTE: Selling in this sale will be very late model rental fleet construction equipment and job completion equipment that is really late and great!

B95, 2006 NH LB75 (4x4), 2005 NH LB75 (4x4), 2002 NH LB75 (4x4), Case 580M, Case 580 Super L (4x4), Case 580C (4x4), (6) 2005 Komatsu WB1402, (2) Komatsu WB140 (4x4), (2) 2007 Volvo BL60-II (4x4), (2) 2007 Volvo BL60, SOIL COMPACTOR: 2004 Cat 815F, 14 VIBRATORY ROLLERS: 2006 IR SD105F, (2) IR SD100D, IR SD77F, (3) 2004 IR SD45F, IR SD40F, Benford SP2006, 2006 Dynapac CA250D, Dynapac CA151D, 2007 Dynapac CA134PDB, Hamm 3307, Hamm 2210 (shell kit), 2 ASPHALT ROLLERS: (2) 2002 Hypac C766C, TRENCH ROLLERS: 2005 Multiquip P33HHMR, 3 RUBBER TRACKED SKID STEERS: 2008 Bobcat T250, 2007 Takeuchi TL130, 2007 Takeuchi TL130, 3 SKID STEERS: 2006 NH L170, 2006 NH L170, 2006 NH L160, 5 TELESCOPIC FORKLIFTS: 2007 JLG G9-43A, 2004 JLG G6-42A, Gradall 534D9-45, Gradall 534C, JCB 530, BOOM LIFTS: JLG 600A, 3 SCISSOR LIFTS: JLG 1932E2, Genie GS1930, 2004 Skyjack SJIII-3226, 6 AIR COMPRESSORS: 2008-(4) 2006-2004 Airman PDS185CFM, 16 GENERATORS: Demo Cat 500kw, (2) 2005 Atlas Copco QAS78, 2005 Atlas Copco QAS58, Wacker 50kw, 2007 Wacker 25kva, (3) 2007 MMD 7000 watt, (3) 2009 Lifan 6500 WA55, 2007 MMD 4300watt, (3) 2007 MMD 2900watt, 11 LIGHT PLANTS: (5) 2006- (6) 2005 Amida AL4060D4MH, 3 WELDERS: 2006 Lincoln Vantage 300, 2006 Miller BB400D, 2005 Miller BB300P, 2 LOADER LANDSCAPE TRACTORS: Case 570LXT, Case 480E, 2 SWEEPERS: (2) Broce CR350, TRUCK TRACTORS: 2007 Freightliner DL200 (tri., 515hp, 26,000miles), 2 WATER TRUCKS: (2) 2007 Ford F750 (3 & 4,000 miles), SERVICE TRUCK: 2007 Ford F650XL (like new e/w 10,000lb. crane, fully loaded!), SUVS: 1989 Land Rover (4x4), BUSES: 1996 Ford E350, DETACHABLE EQUIPMENT TRAILERS: 2004 Fontaine TA51H (tri.), 2 GOOSENECK TRAILERS: (2) 2009 Belshe DT255, EQUIPMENT TRAILERS: Ledwell/ Dovetail, TAGALONGS: 2001 Trailking TK40(20T).

HILITES INCLUDE: 4 ARTICULATED HAUL TRUCKS: 2006 Cat 725, 2006 Cat 725, Cat 725, Volvo A35V, 24 HYDRAULIC EXCAVATORS: 2008 Cat 330DL, 2006 Cat 330DL, (2) Cat 330BL, (3) Cat 325L, 2006 Cat 322CL, 2007 Cat 320CL, 2007 Cat 314CLC, 2005 Kobelco SK300LC, (2) Kobelco SK290, Kobelco SK250, 2003 Kobelco SK210, 2007 Kobelco SK70SR, 2006-2004 Komatsu PC270LC-7, 2008 Volvo EC330CL, 2005 Bobcat 322, Hyundai 290LC-7, 2007 Doosan S255V, 2008 Case CX460 (1000hrs.), 2007 Case CX330 (1414 hrs.), 2007 Case CX75, LONG REACH EXCAVATOR: Linkbelt LS-3400C Series II, 9 MOTOR GRADERS: (2) 2006 Cat 140HVHP, 2006-2002 Cat 140H, (3) Cat 12G, Champion C80, Dresser 850, 7 RUBBER TIRED LOADERS: Cat 966FHL, Cat 950F, Cat 936E (top clamp), 2005 Cat 924G, Cat 920, JD 644E, JD 544J, 20 CRAWLER TRACTORS: Cat D8R, Cat D8N, Cat D6RLGP, 2008 Cat D6KXL (ripper), Cat D5HLGP (Carco winch), Cat D5HLP (Cat winch),Cat D4H, 2003 Cat *** ALUMINUM BARGE: to be sold offsite at D4GXL, 2007 JD 700JLT, 2008 JD 700JLGP (cab), 2006-2005 JD 650JLT, 23715 Hardy, Spring, TX 77375.*** 2008 JD 650JLGP, 2005 JD 550JLGP, 2005 JD 450JLGP, JD 450H, 2005 Komatsu D65PX-15, 2007 Komatsu D51EX, 2007 Komatsu D31EX, 2008 Case 650J, 2 CRAWLER LOADERS: 2005 Cat 953C, Cat 941B, 38 TRAC- For more info.: (832) 350-6032 TOR LOADER BACKHOES: Cat 420D (4x4), Cat 416 (4x4), 2008 JD 410J, 2008 JD 410J, (3) 2009-(4) 2008-(3) 2007 JD 310J (4x4), 2006-2005(3) 2004 TEXAS AUCTION LICENSE: AUCTIONEER #16356 Michael W. Powers JD 310G (4x4), 2006 NH B95 (550 hrs., 4x4), 2006 NH B95 (4x4), 2006 NH SALE SITE PHONE: (863) 660-3613 Everything sells “AS IS,” “WHERE IS,” everything sells to the highest bidder without minimums or reserve.

Visit us on the Internet at www.lyonauction.com

The Complete Auction And Appraisal Service

ALEX LY

N & SON

SALES MANAGERS & AUCTIONEERS, INC.

Bridgeport, NY 315/633-2944, Fax: 315/633-8010 • Syracuse, NY (Evenings) 315/637-8912 • www.lyonauction.com

Page 52 • April 9, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 9, 2011 • Page 53

2006 CAT 140H VHP

2005 CAT D8T

FOLLOW THE NEW LEADER. INNOVATIVE EXPERIENCED KNOWLEDGEABLE

2007 CAT 345CL (2)

UNRESERVED PUBLIC AUCTIONS:

APRIL 12 . HOUSTON, TEXAS APRIL 20 . ALBUQUERQUE, NEW MEXICO APRIL 26 . TWIN CITIES, MINNESOTA MAY 10 . DALLAS/FORT WORTH TEXAS

BID ONLINE: WWW.CATAUCTIONS.COM Follow the new leader.® www.catauctions.com

CAT AUCTION SERVICES 860 Blue Gentian Road, Suite 100 Eagan, MN 55121 855.228.2286 info@catauctions.com

2007 CAT 815FII *Equipment subject to change

View the full equipment list, photos, and inspections at: www.catauctions.com ©2011 Caterpillar. All Rights Reserved. CAT, CATERPILLAR, their respective logos and “Caterpillar Yellow,” as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

Page 54 • April 9, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ALEX LYON & SON AUCTIONEERS www.lyonauction.com 315-633-2944 • Houston, TX Tues., April 12, 2011 For: Late Model Rental Fleet Construction Equipment, Support, Attachments, Trucks & Trailers • Houston, TX Thurs., April 14, 2011 For: Construction Equipment, Support, Attachments, Trucks & Trailers • Buffalo, NY Fri., April 15, 2011 For: Crane Auction – Complete Liquidation of Quality Cranes, Support Equipment • Buffalo, NY Sat., April 16, 2011 For: Late Model Rental Returns of Primarily New Holland, Construction Equipment, Attachments, Trucks & Trailers • Cleveland, OH Thurs., April 28, 2011 For: Large Truck Tractor, Dump Truck, Service Truck, Pickup, Trailers and Construction Equipment • Canton, OH Fri., April 29, 2011 For: Job Completion of Large Masonry & General Contracting Equipment, Support, Trucks & Trailers • Columbus, OH Sat., April 30, 2011 For: Light Construction, Lawn & Garden Equipment, Large Quantity of Like New Tools and Support Equipment • Syracuse, NY Sun., May 1, 2011 For: Light Construction, Compact Tractors, Lawn & Garden Equipment, Skid Steers, New & Used Support Equipment • Manassas, VA Thurs., May 5, 2011 For: Job Completion of Late Model Construction, Support Equipment, Trucks & Trailers • Lexington, KY Fri., May 65, 2011 For: Job Completion of Late Model Cat, Komatsu Construction Equipment, Support, Attachments, Trucks & Trailers • Augusta, ME Sat., May 7, 2011 For: Complete Liquidation Late Model Rental Fleet Construction Equipment, Support, Attachments, Trucks & Trailers • Hornell, NY Fri., May 13, 2011 For: Large Quantity of Trucks, Moving Trailers, Forklifts and Support Equipment • Williamsport, PA Sat., May 14, 2011 For: Large Quantity of Trucks, Moving Trailers, Forklifts and Support Equipment • Orlando, FL Tues., May 17, 2011 For: Late Model Construction, Aerial, Forklifts, Support, Trucks & Trailers • Atlanta, GA Fri., May 20, 2011 For: Late Model Rental Fleet Construction, Aerials,

Forklifts, Trucks & Trailers

CA NADA

• Tuscaloosa, AL Sat., May 21, 2011 For: Large Logging, Construction, Support, Dump Trucks, Truck Tractor & Trailer Auction

• Grand Prairie, AB, CAN April 13-14, 2011

• Rochester, NY DATE TBA For: Late Model Dump Trucks, Truck Tractors, Equipment Trailers, Construction Equipment, Aerials & Forklifts • Ledyard, CT (Foxwood Casino) DATE TBA For: Construction and Support Equipment, Aerial Lifts, Forklifts, Trucks & Trailers • Auburn, NY DATE TBA For: Liquidation of former P&C Supermarket • Dallas, TX DATE TBA For: Late Model Rental Fleet, Construction & Support Equipment, Trucks & Trailers RITCHIE BROS. AUCTIONEERS www.rbauction.com 402-421-2631 USA • Cleveland, OH April 12, 2011 • Houston, TX April 13-14, 2011 • Hartford, CT April 14, 2011 • Hobbs, NM April 15, 2011

• Truro, NS, CAN April 21, 2011 • Edmonton, AB, CAN April 27-28, 2011 • Toronto, ONT, CAN May 10-11, 2011 • Prince George, BC, CAN May 12, 2011 • Montreal, QC May 19-20, 2011 • Lethbridge, AB June 21, 2011 • Regina, SK July 13, 2011 INTER NATI ONAL • Moncofa, Spain April 14-15, 2011 • Moerdjik, NLD April 20-21, 2011 • Krakow, Poland May 6, 2011

• Sacramento, CA May 24, 2011 • Madison, WI May 24, 2011 • Olympia, WA May 26, 2011 • Chicago, IL May 26, 2011 • Nashville, TN June 2, 2011 • Denver, CO June 7, 2011 • Northeast, MD June 7, 2011 • Reno, NV June 9, 2011 • Las Vegas, NV June 10, 2011

• Los Angeles, CA Wed., July 20, 2011 For: Construction Equipment • Omaha, NE Wed., July 27, 2011 For: Construction Equipment • Seattle, WA Wed., August 3, 2011 For: Construction Equipment • Grand Rapids, MI Wed., August 17, 2011 For: Construction Equipment

• Prospect, CT Sat., June 25, 2011

• Caorso, Italy May 12, 2011

• Prospect, CT Sat., August 20, 2011

• Meppen, Germany May 26, 2011

• Prospect, CT Sat., October 15, 2011

• Narita, Japan May 31, 2011

• Prospect, CT Sat., December 10, 2011

• Panama City, Panama June 17, 2011

• Bozeman, MT May 19, 2011

• Denver, CO Tues., June 21, 2011 For: Construction Equipment

• Dubai, UAE May 10-11, 2011

• Phoenix, AZ April 29, 2011

• Orlando, FL May 18-19, 2011

• Johnson Creek, WI Fri., April 15, 2011

• Prospect, CT Sat., April 30, 2011

• Avignon, France June 9, 2011

• Tipton, CA May 18, 2011

• Lafayette, LA Thurs., May 19, 2011 For: Construction Equipment

• Torreon, Mexico May 10, 2011

• Kearney, NE April 27, 2011

• Fort Worth, TX May 11-12, 2011

IRAY AUCTIONS www.iraymn.com 320-968-7230

DAVIS AUCTIONS www.davisauctionsinc.com 203-758-4087

• Ocana, Spain June 2-3, 2011

• Los Angeles, CA May 6, 2011

• Dallas, TX Tues., May 10, 2011 For: Construction Equipment

• St. Aubin Sur Gaillon, France May 10, 2011

• Salt Lake City, UT April 19, 2011

• Frederick, MD May 5, 2011

Coming Auctions

BAR NONE AUCTION www.barnoneauction.com 866-372-1700 • San Bernardino, CA Sat., May 6, 2011 For: Construction Equipment • San Bernardino, CA Sat., June 25, 2011 For: Construction Equipment BUNCH BROTHERS AUCTIONEERS www.bunchbrothers.com 270-376-2992 • Louisville, NY Tues., April 19, 2011 For: Construction Equipment, Trucks and Trailers CAT AUCTION SERVICES www.catauctions.com 866-750-9432 • Houston, TX Tues., April 12, 2011 For: Construction Equipment • Albuquerque, NM Wed., April 20, 2011 For: Construction Equipment • Twin Cities, MN Tues., April 26, 2011 For: Construction Equipment

DEL PETERSON & ASSOCIATES www.delpeterson.com 800-492-9090 • Mead, NE Wed.-Thurs., April 20-21, 2011 For: Complete Truss, Wall & Construction Facilities Dispersal Auction DEMOTT AUCTION COMPANY www.demottauction.com 229-985-4665 • ONLINE ONLY Sat., April 16, 2011 For: Construction Equipment FREY & SONS, INC. www.freyandsons.com 419-455-3739 • Clinton, MI Wed.-Thurs., May 4-5, 2011 For: Sand and Gravel Screening, Wash Plants, Excavating Equipment

• ONLINE ONLY Fri., May 6, 2011 www.IRAYONLINE.COM • Sioux Falls, SD Fri., May 20, 2011 • Foley, MN Fri., June 3rd • Portage, WI Fri., July 15, 2011 • ONLINE ONLY Fri., August 5, 2011 www.IRAYONLINE.COM • Sioux Falls, SD Fri., August 19, 2011 • Foley, MN Fri., September 16, 2011 • Portage, WI Fri., October 14, 2011 • ONLINE ONLY Fri., November 4, 2011 www.IRAYONLINE.COM • Sioux Falls, SD Fri., November 18, 2011 • Foley, MN Fri., December 2, 2011 IRON PLANET AUCTIONS www.ironplanet.com 888-433-5426 ONLINE AUCTIONS Go to www.ironplanet.com to view the complete auction schedules, inspection reports and to place your bid!

• Thurs., April 14, 2011 For: Construction Equipment • Wed., April 20, 2011 For: Motor Equipment • Thurs., April 21, 2011 For: Construction Equipment • Wed., April 27, 2011 For: Construction Equipment • Thurs., April 28, 2011 For: Construction Equipment COCHRAN AUCTIONS www.cochranauctions.com 301-739-0538 • St. Mary’s County, MD Fri.-Sat., April 29-30, 2011 For: Heavy Equipment & Truck Auction KEENAN AUCTION COMPANY www.keenanauction.com 207-885-5100

MARTIN & MARTIN AUCTIONEERS, INC. www.mmaauction.com 800-763-2728 • Brooklyn, MS Sat., April 16, 2011 For: Auto Auction – Main Facility • Brooklyn, MS Mon., April 18, 2011 For: Equipment Virtual Auction • Princeton, WV Wed., April 20, 2011 For: Absolute Auction Improvements Unlimited • ONLINE ONLY Wed., April 27, 2011 – 10AM For: Construction Equipment • Rutherfordton, NC Wed., May 4, 2011 For: Absolute Auction Carolina Construction of Rutherfordton, Inc. • Stanley, NC Wed., May 25, 2011 For: One Owner Absolute Auction • Pelzer, SC Wed.-Thurs, June 15-16, 2011 For: Annual Summer Contractors Auction – Construction Equipment, Trucks & Trailers G.W. McGREW AUCTION COMPANY www.mcgrewequipment.com 717-428-0922 • Seven Valleys, PA Mon., April 11, 2011 For: Farm & Construction Equipment Auction MEEKINS AUCTION COMPANY www.meekinsauction.com 800-499-6560 • Lumberton, NC Wed., April 20, 2011 For: Heavy Equipment Auction

• ONLINE ONLY Bidding Starts to Close Thurs, April 21 - 10AM For: Heavy Construction Equipment RITCHASON AUCTIONEERS INC. www.ritchason.com 800-806-3395 • Vine Grove, KY April 30, 2011 For: Construction Equipment • Lebanon, TN June 11, 2011 For: Construction Equipment • Lebanon, TN September 17, 2011 For: Construction Equipment • Lebanon, TN December 10, 2011 For: Construction Equipment RYAN AUCTION SALES www.ryanauctionsales.com 603-491-6159 • Virtual Equipment and Truck Auction Thurs., April 21, 2011-10AM • Virtual Equipment and Truck Auction Tues., May 3, 2011- 10AM • Virtual Equipment and Truck Auction Thurs., May 26, 2011- 10AM • Virtual Equipment and Truck Auction Tues., June 14, 2011- 10AM • Virtual Equipment and Truck Auction Thurs., June 30, 2011- 10AM • Virtual Equipment and Truck Auction Thurs., July 21, 2011- 10AM • Virtual Equipment and Truck Auction Thurs., August 18, 201110AM • Virtual Equipment and Truck Auction Tues., Sept. 6, 2011-10AM

NITKE AUCTIONS www.nitkeauctions.com 715-362-6162

• Virtual Equipment and Truck Auction Tues., October 11, 201110AM

• Wausau, WI Fri.-Sat., April 29-30, 2011 For: Heavy Construction Equipment, Trucks and Trailers PETROWSKY AUCTIONEERS INC. www.petrowskyauctioneers.c om 860-642-4200

• Boswell, PA Wed., April 13, 2011 For: Complete Liquidation Straw Construction Co., Inc.

MALTZ AUCTION COMPANY www.maltzauctions.com 516-349-7022

• Columbus, OH Fri., May 20, 2011 For: Earthmoving and Paving Equipment

• Valdosta, GA Thurs., April 21, 2011 For: Sealed Bid Auction 07 Terex Demag Crawler Crane

• Bayshore, NY Thurs., April 14, 2011 For: Operating Carting Company

• Fitzwilliam, NH Fri., June 10, 2011 For: Late Model, Well Maintained Heavy Equipment

Coming Auction page Sponsored by NER

• ONLINE ONLY Bidding Starts to Close Thurs, April 14 - 10AM For: Heavy Construction Equipment

• Lumberton, NC Thurs., April 28, 2011 For: Heavy Equipment Auction

• Bath, ME Thurs., May 12, 2011 For: Construction and Support Equipment

HUNYADY AUCTION COMPANY www.hunyady.com 800-233-6898

PURPLE WAVE AUCTION www.purplewave.com 866-608-9283

• Virtual Equipment and Truck Auction Thurs., Sept. 22, 2011-10AM

• Virtual Equipment and Truck Auction Thurs., October 27, 201110AM • Virtual Equipment and Truck Auction Thurs., Nov. 17, 2011-10AM • Virtual Equipment and Truck Auction Thurs., Dec. 15, 2011-10AM SALES AUCTION COMPANY, LLC www.salesauctioncompany.c om 860-627-7506 • Windsor Locks, MA Sat., May 7, 2011 For: Construction Equipment

SAPERSTEIN AUCTIONEERS & APPRAISERS www.pesco.com 800-600-6553 • Taunton, MA Wed., May 4, 2011 For: Construction Equipment • Holbrook, MA Thurs., May 12, 2011 For: Construction Equipment STEFFES AUCTIONEERS INC. www.steffesauctioneers.com 701-237-9173 • Cathay, ND Tues., April 19, 2011 For: Late Model Farm Equipment Auction • Kindred, ND Tues., April 20, 2011 For: Farm Retirement Auction STOCK AUCTION COMPANY www.stockra.com 800-937-3558 • ONLINE ONLY Thurs., April 14, 2011 For: Construction Equipment • ONLINE ONLY Wed., April 27, 2011 For: Construction Equipment • York, NE Fri., May 6, 2011 For: Heavy Equipment & Fleet Vehicles UNITED AUCTIONEERS & APPRAISERS www.uaa-auctions.com 517-202-9173 • Lansing, MI Thurs., May 19, 2011 For: Bashore/Marco Masonry, Inc. UTILITY AUCTIONS www.utilityauctions.net 302-530-9103 • Wilmington, DE Fri., April 22, 2011 For: Construction and Utility Equipment VAUGHAN AUCTION GROUP www.vaughanauctiongroup.c om 903-873-6777 • Wills Point, TX Thurs., May 5, 2011 For: Spring Contractor’s Public Auction YODER & FREY AUCTIONEERS, INC. www.yoderandfrey.com 419-865-3990 • Bellville, OH Thurs., April 14, 2011 For: Construction Equipment, Gravel Plant • Williamston, MI Wed., April 20, 2011 For: Midwest Bridge Co., One Owner Absolute, Complete Liquidation • Bow, NH Thurs., May 19, 2011 For: 15th Annual spring Consignment Auction • Darlington, PA Thurs., May 26, 2011 For: 8th Annual Spring Consignment Auction

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 9, 2011 • Page 55

Page 56 • April 9, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

B C usiness

AGC Volunteer Appreciation - The AGC of St. Louis is grateful for the many members who serve on committees. The time devoted by these individuals and the knowledge they share with the industry in very important to the success of the AGC. INFORMATION - MSHA Enforcement Alert from an IAAP Member. An IAAP company has posted a new MSHA citation on the MSHA Enforcement Alerts website at www.mshaenforcementalerts.com maintained in partnership by the IAAP and other Midwest Aggregate Associations. This citation concerned the company because the inspector believed miners were stepping over the motor, but just as in a lot of other cases, this practice was acceptable during previous inspections by this same inspector and also during a CAV that was completed on these screens just 2 1/2 years ago. This motor configuration is present on many screens by different manufacturers.

To view further details on this citation you may log on to http://mshaenforcementalerts.com/citations.php?i d=144.

April 21, 2011 – Annual Reception.

SAVE THE DATE!!! AGC of St. Louis Annual Reception is on Thursday, April 21, 2011 from 5:30 PM to 8:00 PM at the Marriott St. Louis Union Station – Grand Ballroom, One St. Louis Union Station, St. Louis, MO (located on the corner of Market and 20 th Streets).

Dress: Business Attire. For years this event has been the largest commercial construction industry event for networking with peers, prospects, owners, architects and politicians. Building relationships is more important than ever. The event is open to members and non-members to attend.

Questions: Call the AGC of St. Louis office at 314-7812356.

May 3, 2011 – C onve nt ion. Illinois Association of Aggregate Producters is holding the 43 rd Annual IAAP Convention at the Crowne Plaza Hotel in Springfield, ILL. You may contact John Henriksen, Executive Director, IAAP, Springfield, IL at 217-2411639 or visit iaap@hansoninfosys.com for more information on this event. *** AGC of St. Louis Early Bird Sponsorships Now Available for the 2011 Spring Sporting Clays Tournament!!! ACT FAST!!! The costs of 2011 sponsorships have been REDUCED by $50! Sponsorship opportunities will be available after the March 25 th deadline, but not at the discounted rates that are available to the early birds! Contact AGC St. Louis office for more details!

July 18-20, 2011 – Workshop. Illinois Association of Aggregate Producers (IAAP) Illinois Teachers Workshop: Teachers from your community should register. The IAAP’s Public Information and Education Committee will hold its 15 th annual Illinois Teachers Workshop: Rocks, Minerals & Mining in Today’s Society at Lewis University in Romeoville, Illinois on July 18 to 20, 2011.

This workshop is proving to be very popular.

Teachers have begun registering and we are now 1/3 of the way to our capacity of 35 teachers. The goal of this workshop is to inform teachers in grades K-12 about the importance of rocks, minerals, and mining in everyday life.

Questions?

Please call, Shawn McKinney, Outreach Manager, IAAP, nd 1115 S. 2 Street, Springfield, IL at 217241-1639.

AED Dealer Executive Events Associated Equipment Distributors (AED) is pleased to announce several events and programs tailored specifically for dealership principals and senior management.

Noteworthy Events this Year Include: AED Washington Fly-In May 11-13, 2011, Washington, D.C. This two-day annual meeting provides distributors with a unique opportunity to learn the current status on issues that are critical to their business, as well as dialogue face-to-face with their own elected officials.

alendar

AED’s CFO Conference: Financial Issues for Distribution CFOs and CEOs May 24-25, 2011, Oak Brook, Illinois Repeated October 20-21, 2011 Join the financial powerhouses of the industry for an in-depth examination of the accounting and tax issues, financial strategies, and profit opportunities for the equipment distributor. The CFO Conference is your chance to meet with financial experts and peers for frank discussions, thorough analysis, and an insider’s perspective on the current year and what lies ahead. The AED CFO Conference is designed specifically for CFOs, CEOs, COOs, as well as other key executives with financial responsibilities. All attendees will enjoy a blended program of seminars and workshops with an emphasis on handson learning, group discussion and Q&A forums.

A GA of St . Louis Eve nt s!

I T’S A LMOST TI ME FOR THE C LC A NNU A L BU I LD-A -BRAT PI C NI C ! ! !

Save t he Dat e : The CLC Annual BUILD-ABRAT Picnic will be held on THURSDAY, JUNE 9, 2011 at Tillis Park, St. Louis. There will be beer, brats and a band!

DETAILS TO FOLLOW!

I T’S RED BI RD SEA SON I N THE NEW STA DI U M! ! !

2011 St . Louis C A RDI NA LS Ticke t s are now available !

The AGC of St. Louis has a luxury suite this season at Busch Stadium. The 2011 price for a single game is $1,900. Three game packages are available for $5,700, and five game packages are priced at $9,500. All food and beverages costs are in addition to these fees. You may reserve your choice of game packages by listing the package number and emailing information to dpigg@agcstl.org. Reservations will be held in the order your request is received. The game dates are firm, however, the Cardinals say that some game times may be changed to accommodate national television. If you have questions, please call Donna M. Pigg, Administrative Accountant, at 314-781-2356 extension 108.

Tue sday, May 24, 2011 – Golf Out ing.

AGC St. Louis – The Political Action Committee (PAC) is hosting the 28 th Annual Golf Outing on Tuesday, May 24 th . This event offers great sponsorship opportunities.

Act now and you will receive Early Bird Pricing! The Early Bird Discount ends April 18 th . After the tournament, attendance prizes will be given away. Donations of prizes will be given away on your company’s behalf.

Questions??? Please feel free to contact Stephanie Mitchell, Communications Coordinator, at smitchell@agcstl.org or 314480-3178.

AED Executive Forum September 8-9, 2011, Rosemont, Illinois This two-day event will combine information on the trends and issues that are shaping the future of equipment distribution with an opportunity to network with senior-level industry executives. An impressive group of leaders will share their insights and perspectives and challenge you with new answers to old problems.

Successful 2010 Build St. Louis Expo.

The Build St. Louis Expo was a great success! The aisles were full of representatives from all facets of the industry. All of the booths were sold, so attendees had some great new specialty contractors to meet and view new products on the market by the suppliers. The expo gave another meaning to the words “social networking” and actually shaking hands.

Our appreciation to our industry participants – St. Louis Council or Construction Consumers, AIA St. Louis, St. Louis Minority Business Council and Contractors Assistance Program who helped promote the event to their members.

Oregon Couple Wants to ‘Adopt’ Arrah Wanna Bridge

By Yuxing Zheng THE OREGONIAN

WELCHES, Ore. (AP) It’s not an adorable kitten or a child in need of a loving home, but Bob and Margaret Thurman are nonetheless intent on adoption.

The Thurmans have launched a bid to “adopt” the Arrah Wanna Bridge, a one-lane pony truss bridge spanning the Salmon River in Welches about a half mile south of U.S. 26. They hope to move the century-old structure to one of their nearby properties, repurpose it as part of a public pedestrian or hiking trail, and, in the process, preserve a piece of local history and architecture.

“People are nostalgic about the past, and there’s an awareness that things are disappearing,” Bob Thurman said. “Somebody needs to move it or they’ll scrap it and sell it to China.”

The Thurmans hope to persuade Clackamas County, which owns the bridge, to let them move it before crews start construction in 2012 on a wider, modern replacement. They expect to pay for relocation and future maintenance costs, although they haven’t solicited bids or submitted a detailed proposal.

If the Thurmans succeed in their quest, it won’t be the first time the bridge has been moved. But from exactly where, nobody seems to know.

Bridge experts date the 117-ft.-long, 16ft.-wide span as roughly a century old, from sometime in the 1910s or 1920s. But it doesn’t match any of the standard design plans for truss bridges drawn up by officials in the 1920s and 1930s at the old Oregon State Highway Department, the predecessor of today’s Oregon Department of Transportation.

All the experts know is that records indicate the bridge was relocated to its current Salmon River site in 1957 to replace a wood Howe truss bridge.

Today, the W-shaped truss bridge with its camelback curve is “a wonderful example” of one of a handful of remaining steel pony truss bridges in the area, said Robert W. Hadlow, a senior historian with ODOT. “These little truss bridges are great examples of the advances in steelmaking in this country in the early 20th Century. This bridge was of that period of industrialization in America.”

Pony truss bridges steadily declined in popularity over the years, in part because of growing traffic demands, Hadlow said. But truss bridges are relatively simple to relocate because they can be easily taken apart and reassembled.

“If there is an opportunity to preserve this bridge rather than scrap it, it’s a way of ensuring that people will continue to appreciate our built history,” Hadlow said. “It’s not unlike preserving an old house, especially if it’s an example of an architectural style that is fading out.”

Adopting a bridge may be untraditional, but it’s not unheard of.

The Indiana Department of Transportation operates a Historic Bridges Marketing Program, where 50 or so bridges are listed for rehabilitation or possible relocation. In Michigan, the Calhoun County Road Commission operates Historic Bridge Park, which draws pedestrians and bikers with a collection of rehabilitated, relocated historic bridges.

The Thurmans years ago embraced the burgeoning heritage tourism trend. They’ve lived in Brightwood since 1977 and devoted their full attention to their Welches-area properties after retiring in 2000 from jobs at Portland Public Schools, she as a grade school teacher, he as a school psychologist.

The Cabins Creekside at Welches, a rental property they own, is steeped in nostalgia.

Old gas station signs, a Johnson seahorse motor, a corn sheller, kerosene stove and rendering pot to melt lard all decorate the property. Inside the rooms, vintage posters and historic photographs introduce younger generations to bygone views and artifacts, such as the Skiway, essentially a flying bus of sorts that transported visitors on a bus suspended on a cable between Government Camp and Timberline Lodge.

Clackamas County will likely advertise a request for proposals for the relocation of the Arrah Wanna bridge in upcoming months, said Joel Howie, a civil engineering supervisor for the county. The county would prefer a proposal that keeps the bridge in the local area, he said.

That’s good news for the Thurmans.

“Historic marketing works,” Bob Thurman said. “Here, you have something people can actually experience, move through. You can walk through history.”

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 9, 2011 • Page 57

Sealed Bid Auction

By Order of Secured Creditor Siemens Financial Services, Inc. Bid Deadline: Thurs., April 21, 2011 5:00PM EDT Location: Valdosta, Georgia

`07 TEREX DEMAG CC2400-1, 440 Ton Crawler Crane, s/n 43022, Daimler Chrysler OM501LA, 353HP diesel engine and hydraulic pumps, e/w 275.6’ type 2721 pin-connected main lattice boom, 275.6’ type 2317 luffing jib, 118’ type 1813 fixed jib, main and auxiliary hoists, Demag IC-1 crane control system with touch screen, LMI and anti-two block systems, 352,000# 15-piece removable counterweight, 88,200# 4-piece carbody counterweight, Superlift attachment less counterweights, self-assembly system, 320 ton 2x5 sheave and 100 ton 3-sheave ramshorn hook blocks, 50 ton single sheave hook block, 34’6� crawlers, and 48� pads. In good condition with good undercarriage. (7,813 Hours) Please Contact Auction Company For Sealed Bid Kit, Brochure, and Inspection Details!

(800) 233-6898 or sales@hunyady.com

www.hunyady.com T

7+856'$< OC[ VJ CO 7+8 56'$< OC[ 56 C VJ CO

Early Registration Registration & P Preview review 5/2 - 5/4

LENDING LENDING INSTITUTIONS INSTITUTIONS

CONSTRUCTION CONSTRUCTION COMPANIES COMPANIES

EARL EARLY LY HIGHLIGHTS: (3) CA CAT ATT D6R, D6 K Komatsu omatsu D65, D41, D37, CAT 140G,, 12G 12G,, CA CAT 310G,, Case 580L 580L,, CA AT 140G ATT 416C, 416C JD 310G CA CAT AT 966G 966G,, K Komatsu omatsu W WA A 320, K Komatsu omatsu PC220LC, 200LC, PPaving, aving, Compaction, F Forklifts, orklifts, Utility TTractors, ractors, Generators, W Welders, elders, Bucket TTrucks, rucks, Service TTrucks, rucks, LLube ube TTrucks, rucks, Dump Trucks, Trucks, Truck Truck TTractors, ractors, Flatbeds, railers, Attachments, PPick-ups, ickk-ups, TTrailers, Oncor Oncor, r, Luminant, TXU Salvage Sal and much more!

'5,9( 7+58 3GTOCPGPV )CEKNKV[

24280 Interstate 20 - Wills Point, TX 75169 (5 miles West of Canton)

Canâ&#x20AC;&#x2122;t Can â&#x20AC;&#x2122;t mak make ke e it to the Auction?

Auc No Problem!

Bid LIVE on our NEW website!

Jodi Amaya TX LIC 16537

Buyerâ&#x20AC;&#x2122;s Buyer â&#x20AC;&#x2122;s Premium per item 10% under $1,000 - 2% over $1,000. Auctioneers announcements will take precedence over any printed material. Bank Letter of Guaranty required for all checks and cashier cashierâ&#x20AC;&#x2122;s â&#x20AC;&#x2122;s checks.

Cash buyers will be required to make a $1000.00 deposit before purchasing.

Export buyers will be required to make a $7,500.00 deposit or 10% of expected purchases, whichever is greater greater..

Trustee In Bankruptcy Sale @ Public Auction Re: Bluewater HLD Corp., Case #10-21384-FJB SEPTIC PUMPING & INSTALLATION COMPANY - FULL LIQUIDATION (15) 2008-2009 FREIGHTLINER VAC/JUGGLER TRUCKS & TRAILER MTD TANKS (11) KOMATSU & CAT FULL & MINI EXCAVATORS & SKID STEER LOADERS (25) LATE MODEL TRACTORS - DUMPS - PICKUPS - VANS BACKHOE - LOADER - TRAILERS - COMPRESSORS - JETTERS ROBOTIC PIPE CAMERA SYSTEM - ALLIED EQUIPMENT - OFFICES - PCâ&#x20AC;&#x2122;S

LIVE & INTERNET BIDDING - SALE TO BE HELD @ TAUNTON INN 700 Myles Standish Blvd., Taunton, MA, Wed, May 4, 2011 @ 11 AM Registration Beginning at 8:30 AM Inspections Locations, Monday & Tuesday, May 2nd & 3rd, 9 AM - 3 PM 89 Crawford St., Leominster, MA & 352 Main St., W. Yarmouth, MA (11) 2008 & 2009 Freightliner M2 Vacuum/Juggler/Separating Trucks w/MB MBE4000 6Cylinder Engines, Air-Lift 3rd Axle, 2008 Progress J-10 4800 Gallon 2-Comp Juggler Tank, Solid/liquid|d Separating Unit, (3) 600 Gallon Solid & (1) 200 Gallon Water Tanks, Upper & Lower Access Doors, (3) Rear Loading Valves, Displacement Pump, Hyd Rear Gate, Power Reel w/200' 3â&#x20AC;? Hose, 4 GPM 3000 psi Hyd Pressure Washer, 125 GPM Filter Capacity, 20,000 Fronts & 46000 Rears, 265â&#x20AC;? Wheel Base, Air Ride Suspension, (2) 2008 & (2) 2009 Limited Miles & 0 Hours on Pumps, (1) 2008 Sterling 4X2 Vac Truck w/Pump, Cummins Engine, 10000 Fronts & 21000 Rears, 2008 Hell 9000 Gallon Vacuum Single Compartment Tank w/Air Ride Suspension Trailer 2009 & 2008 Amthor Matador 3500 Gallon Tandem Axle Trailer Mounted Tanks, JJ 2007 Cargo 12' Sgl Axle Utility Sewer Inspection Trailer w/Robotic Controls, Cameras & Monitors, (2) Komatsu 2010 #PC160LC-8 & LC-7OE Hyd Excavators w/Hyd Thumbs & AC Cabs, Komatsu 2008 #PC78MR-6 Hyd Excavator w/0 Swing, Rubber Tracks & Dozer Blade, Cat 2005 #312CL Hyd Excavator w/Hyd Thumb, Dozer Blade & AC Cab, (2) Komatsu 2007 #PCSSMR-2 Mini Excavators w/Rubber Tracks & Dozer Blades, Cat 2000 #301.5 Mini Excavator w/Rubber Tracks & Dozer Blade, Kubota 2008 #KX71-3 Mini Excavator w/Rubber Tracks & Dozer Blade, Cat 2005 #257B Crawler Skid Steer Loader, Cat 2000 #246 Skid Steer, Bobcat Skid Steer, JD #31DSE Backhoe, Intâ&#x20AC;&#x2122;| 1987 #515 Wheel Loader, Terramite 1994 #T7 Mini-Backhoe, Sterling 2008 Tandem Axle Tractor W/MB 450HP Engine & Air Ride Suspension, 14000 Fronts & 46000 Rears, Sterling 2008 Tandem Axle 15' Steel Dump Truck W/Cummins Engine, Air Ride Suspension, 18000 Fronts & 46000 Rears, Sterling 2007 Acterra Sgl Axle 12' Steel Dump Truck w/MB Engine, 10000 Fronts & 23000 Rears, Mack 1988 #R685ST Tandem Axle Dump Truck, Ford 2002 F550 4x2 Flatbed Dump, Chevy 2005 Silverado 6-Wheel Dump Truck, Chevy 2004 C3500 4x4 Dump Truck, Ford 2001 F350 4x4 Dump Truck, (7) 2007-2008 Ford F150 XLT Crew & Extended Cab Pickups, (3) Ford 2008 F350 4x4 Utility Trucks, (2) Ford 2007 AWD Edge Sport Utility Vehicles, (5) Ford 2000-2007 E450 4x2 Cargo Vans, IR Sullair 2009 425CFM Towable Compressor, (2) IR Towable Compressors (5) Harban, Mongoose & Spartan Water Jetters, (18) 1998 - 2009 12' - 22' Up To 20-Ton Box, Flatbed & Utility Trailers Power Snakes, Locators, NaviTrack Units, Rod-O-Matics, Testers, Pipe Cleaners, Saws, Grease Guns, parts, batteries, Hand & Power Tools, Conference Table, Chairs, HH Refrigerators, Flat Screens, PC's & Laptops, Phone System Etc. Terms: Cash, credit card, certified funds or bank letter guaranteeing check. No Buyer Premium, credit card or Internet charges. All Internet Buyers must arrange deposit by wire transfer or credit card 48 hours prior to sale. Contact Michael Saperstein at msaperstein@pesco.com or 800-660-6553 for deposit questions or other inquiries. Honorable Francis J Bailey, bankruptcy Judge, John O Desmond, Trustee, Framingham, MA

GO TO WWW.PESCO.COM FOR FURTHER INFO, DETAILS & TO REGISTER TO BID ÎŁÎ&#x2018;Ď&#x201A;Î&#x2022; Î&#x2018; Î&#x203A;Î&#x2122;ÎŚÎ&#x2022;. â&#x2C6;&#x2020;Î&#x;Î?â&#x2C6;?Τ â&#x2C6;&#x2020;ÎĄÎ&#x2122;Ď&#x201A;Î&#x2022; Î&#x2014;Î&#x;Î&#x153;Î&#x2022; Î&#x2019;ÎĽÎ&#x2013;Î&#x2013;Î&#x2022;â&#x2C6;&#x2020;.

PAUL E. SAPERSTEIN CO., INC.

Î&#x2019;ÎĽÎ&#x2013;Î&#x2013;Î&#x2022;â&#x2C6;&#x2020; â&#x2C6;&#x2020;ÎĄÎ&#x2122;Ď&#x201A;Î&#x2122;Î?Î&#x201C; Î&#x2122;ÎŁ â&#x2C6;&#x2020;ÎĄÎĽÎ?Î&#x161; â&#x2C6;&#x2020;ÎĄÎ&#x2122;Ď&#x201A;Î&#x2122;Î?Î&#x201C;.

144 Centre St., Holbrook, MA 02343 800-660-6553

Page 58 • April 9, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ADVERTISER INDEX ALEX LYON & SONS INC

JCB INC ..........................................................................17

HOUSTON TX.........................................................51

JFW EQUIPMENT INC...................................................42

BARGAINS .....................................................................48

JOHN DEERE.................................................................18

BOMAG AMERICAS INC ...............................................39

JOHN DEERE SKID STEER..........................................33

CALDER BROTHERS CORPORATION........................40

KIRBY-SMITH MACHINERY INC...................................37

CASE CONSTRUCTION...........................................26,27

KLEIN PRODUCTS INC...................................................9

CASE TEXAS TRIPLE TREAT.........................................7

KOBELCO..................................................................20,21

CAT AUCTIONS..............................................................53

KOMATSU AMERICA CORP .........................................23

CEG SCALE MODELS.....................................................8

LASER-GRADER MFG ..................................................12

CLASSIFIEDS.................................................................48 CLM EQUIPMENT CO INC..............................................2 CONSTRUCTION EQUIPMENT GUIDE CEG WANTED........................................................49 AUCTION TRIPLE PLAY ........................................52 FELLING EW SLEEPER & MIDCO .......................34 SHOPPING FOR USED EQUIPMENT ..................22 DITCH WITCH WEST ...............................................30,31 DYNAPAC .......................................................................43 FLANGE LOCK.................................................................6 FLECO ATTACHMENTS ................................................12

LEEBOY..........................................................................42 LIEBHERR EQUIPMENT SOURCE...............................11 NATIONAL EQUIPMENT REGISTER............................54 NORAM...........................................................................41 PAUL E SAPERSTEIN CO INC TAUNTON MA.........................................................57 PUCKETT EQUIPMENT ................................................46 RITCHIE BROS. AUCTIONEERS AUCTION CALENDAR ...........................................59 ROAD BUILDERS MACHINERY ................................5,12

GOMACO CORP............................................................46

SAKAI AMERICA INC.....................................................45

HENDRIX MACHINERY LLC ...........................................3

TAKEUCHI ......................................................................32

HOLT CAT.......................................................................60

TEREX LOADER BACKHOES ......................................28

HUNYADY AUCTION CO

TEREX TRUCKS ............................................................28

VALDOSTA GA........................................................57 HYUNDAI CONSTRUCTION EQUIPMENT ..................25

VAUGHAN AUCTION GROUP LLC WEBSITE AUCTION...............................................57 VENTURE DRILLING SUPPLY LLC..............................11

IRON PLANET ONLINE AUCTION..................................................55

YANMAR AMERICA .......................................................29

The Advertisers Index is printed as a free editorial service to our advertisers and readership.

Construction Equipment Guide is not responsible for errors or omissions.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 9, 2011 • Page 59

AUCTION CALENDAR

42 USA CLEVELAND, OH HOUSTON, TX HARTFORD, CT HOBBS, NM SALT LAKE CITY, UT KEARNEY, NE PHOENIX, AZ FREDERICK, MD LOS ANGELES, CA FORT WORTH, TX TIPTON, CA ORLANDO, FL BOZEMAN, MT SACRAMENTO, CA MADISON, WI OLYMPIA, WA CHICAGO, IL NASHVILLE, TN DENVER, CO NORTH EAST, MD RENO, NV LAS VEGAS, NV

330.405.0772 713.455.5200 860.684.1055 575.492.0194 801.250.1836 816.633.4096 602.269.5631 410.287.4330 951.940.9441 817.237.6544 559.752.3343 863.420.9919 406.728.5972 530.724.3900 815.941.6400 360.956.1500 815.941.6400 615.453.4549 970.535.6700 410.287.4330 775.342.6031 702.644.2468

APR 12 APR 13 & 14 APR 14 APR 15 * APR 19 APR 27 APR 29 MAY 5 MAY 6 MAY 11 & 12 MAY 18 MAY 18 & 19 MAY 19 MAY 24 MAY 24 MAY 26 MAY 26 JUN 2 JUN 7 JUN 7 * JUN 9 JUN 10

Upcoming Unreserved Public Auctions

CANADA GRANDE PRAIRIE, AB TRURO, NS EDMONTON, AB TORONTO, ON PRINCE GEORGE, BC MONTREAL, QC LETHBRIDGE, AB REGINA, SK INTERNATIONAL MONCOFA, SPAIN MOERDIJK, NLD KRAKOW, POLAND ST. AUBIN SUR GAILLON, FRANCE TORREON, MEXICO DUBAI, UNITED ARAB EMIRATES CAORSO, ITALY MEPPEN, GERMANY NARITA, JAPAN OCANA, SPAIN AVIGNON, FRANCE PANAMA CITY, PAN

780.538.1100 902.895.3700 780.955.2486 1.800.357.0659 250.963.8491 450.464.2888 403.362.0859 306.776.2397

APR 13 & 14 APR 21 APR 27 & 28 MAY 10 MAY 12 MAY 19 & 20 JUN 21 JUL 13

+34.964.580559 +31.168.392.200 +48.12659.3040 +33.2.32778610 +52.871.731.7424 +971.4.812.0600 +39.0523.81880 +49.5935.70550 +81.476.490811 +34.925.157580 +33.2.32778610 +507.266.2511

APR 14 & 15 APR 20 & 21 MAY 6 MAY 10 MAY 10 MAY 10 & 11 MAY 12 MAY 26 * MAY 31 JUN 2 & 3 * JUN 9 JUN 17

* NOTE: NEW DATE – DATES ARE SUBJECT TO CHANGE

DON’T MISS OUT. We are still accepting consignments for these auctions.

Don’t miss out: call & take the hassle out of selling your equipment or trucks.

Flexible contract options All-inclusive service Competing on-site & online bidders Certain sale & payment dates

For complete and up-to-date equipment listings visit

» rbauction.com

Page 60 • April 9, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Looking for a Hassle-Free Way to Sell Your Equipment?

HOLT CAT®’s CUSTOMER EQUIPMENT SALES PROGRAM is the Answer.

Learn how you can MAXIMIZE equipment selling PRICE and ELIMINATE many COSTS and risks associated with other selling methods.

• Sell 1 or 100 machines with little or no effort on your part.

• HOLT CAT’s dependable sales representatives will market and sell your equipment through our exclusive network of worldwide customers.

• No exposure to wide price variations of other selling methods.

• Transport costs are eliminated. Once a machine is sold, we arrange for pickup directly from your location.

• HOLT® will handle everything from marketing to sale documentation, collections and payment to you.

One more way that HOLT CAT is working to Call the HOLT CAT Used Equipment Department for full details on how the Customer Equipment Sales program works:

AT YOUR FINGERTIPS. SEARCH

CONNECT

LOCATE

SELECT

QUOTE

with you.

(210) 648-8450

THE INDUSTRY’S HIGHEST QUALITY RENTALS, AVAILABLE RIGHT NOW. Having access to the industry’s largest fleet of high quality machines at the right price is what it takes to keep a project on time and on budget. The new Cat® Rental Store Mobile Site is now available at your fingertips.

Take a moment to test drive the new Cat Rental Store Mobile App that is destined to make the right machines available at the right price for your next project.

Login today at www.catrentalstore.com/holtcat.

DESKTOP READY

LAPTOP READY

IPAD READY

SMARTPHONE READY

CAT MOBILE RENTAL APPLICATION ®

Go to: www.catrentalstore.com/holtcat

©2011 Caterpillar All rights reserved. CAT, CATERPILLAR, their respective logos, “Caterpillar Yellow,” the “Power Edge” trade dress as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.