WACKER NEUSON Tandem Rollers

866-430-7539

www.jfwequipment.com sales@jfwequipment.com

Serving the Asphalt Industry for 30 Years

New Marathon TPS250T

tack distributor, Honda gas eng, 18GPM pump, 250 gal, 5 ft spray wand w/50 ft hose, 6 ft spray bar, operator’s platform, propane burners, flushing system, electric brakes - $17,950

2015 Etnyre Centennial II distributor, 2000 gallons, BT-1 computer w/1 ft cut-offs, propane burners, 14 ft spray bar, Ford F750XL w/Cummins dsl eng, auto trans - $130,000

New Marathon HEPR36 walk behind infrared heater,

3 ft x 3 ft, 360,000 BTU propane burner, (makes patching and repairing much easier ) - $6,950

2001 Omni IIIA screed, 10-18 ½ ft diesel heated screed, power crown & slope - $3800 New Marathon TPS115S tack distributor, Honda gas eng, 10GPM pump, 115 gallons, 5 ft spray wand w/50ft hose, hose reel, 80,000 BTU propane burner, flushing system - $10,300

New Marathon KERA10 oil jacketed walk behind

crack sealer, 10 gallon, manual full sweep agitation, 80,000 BTU propane burner, heated 1" discharge valve, 3” spring loaded squeegee - $6,900

2015 Laymor Sweepmaster SM400 broom, Kubota diesel engine, water system, 8 ft broom, cab w/heat & a/c, all new tires - $36,000

Wacker Neuson Offers Its Tandem Rollers for Asphalt

In the 4-ton class, contractors can choose the RD40 with its 51.2-in. drum width and the 4.5-ton RD45 with a 54.4-in. wide drum. These models also are available as traditional tandem rollers, tandem rollers with oscillation drum or combination rollers.

Wacker Neuson’s comprehensive compaction product line includes a large selection of tandem rollers for the compaction of sub-base materials and asphalt.

Designed to increase productivity, while offering operator comfort, convenience and maneuverability, these rollers deliver quality compaction results in demanding conditions with sizes and features to fit large or small jobs, according to the manufacturer.

With the large selection of models, contractors can easily choose the best roller for their application. The product range includes 10 tandem (double-drum) rollers with either vibration drums or oscillation drums and five combination rollers for applications on uneven ground conditions and on steeper grades. The vibration drums are ideal for traditional compaction work such as sub base for a variety of applications and asphalt repair and finish layers.

Rollers with an oscillation drum compact extremely efficiently, since the drums maintain permanent contact with the ground. These rollers are an excellent choice for urban areas with sound restrictions and vibration-sensitive areas such as on bridges, according to the manufacturer.

The smallest model in Wacker Neuson’s new line is the RD18, 1.8-ton, which is available in two drum widths, 31.5 and 39.4 in. With the unilateral drum support, users have clear sided curb clearance that allows flush rolling on both sides and flush vibration close to walls or curbs.

The RD24, 2.4-ton, model offers a drum width of 39.4 in. and the 2.8-ton, RD28 has a 47.2-in. wide drum.

The RD24 and RD28 are offered in three versions: tandem-axle roller with two vibrating drums; combination roller with vibrating front drum and pneumatic rear tires; vibrating front drum with oscillating rear drum. These models feature an offset drum design that allows for easy maneuvering when compacting along walls. In addition, the offset drum design increases productivity by reducing cut marks.

In the 4-ton class, contractors can choose the RD40 with its 51.2-in. drum width and the 4.5-ton RD45 with a 54.4-in. wide drum. These models also are available as traditional tandem rollers, tandem rollers with oscillation drum or combination rollers.

The RD40 and RD45 have high centrifugal forces that can tackle the most demanding compaction tasks as well as the offset drum design for enhanced maneuverability and production. Large fuel and water tanks extend operation time and central drainage means water can be drained in one simple step.

The RD40 and RD45 come standard with a fold-down roll-over protective structure (ROPS).

All of Wacker Neuson’s ride-on rollers feature a three-point articulated pendulum joint that ensures uniform weight distribution on the front and rear drums at all times. This also improves maneuverability and stability when turning.

Due to the specially tapered design, the operator maintains an enhanced view of the drum edges and the area being compacted. The ergonomic operators’ platform with reduced vibration and ample legroom and adjustable seat all contribute to comfortable operating conditions.

For more information, visit www.wackerneuson.com. 

KIRBY-SMITH MACHINERY INC.

www.kirby-smith.com

6715 W. Reno Oklahoma City, OK 800-375-3339 McAlester, OK 918-310-1550 Tulsa, OK 918-438-1700

Dallas, TX 214-371-7777 Fort Worth, TX 817-378-0600 Abilene, TX 325-692-6334 Amarillo, TX 806-373-2826 Lubbock, TX 806-745-2112 Odessa, TX 432-333-7000 Waco, TX 254-261-1370 NUECES POWER EQUIPMENT

www.nuecespower.com

Corpus Christi, TX 361-289-0066 Laredo, TX 956-725-0066 San Benito, TX 956-361-0066 Victoria, TX 361-576-0066

Vinton, TX 915-541-0066 Houston, TX 713-247-0066 San Antonio, TX 210-310-0066 HONNEN EQUIPMENT CO.

www.honnen.com

Denver, CO 303-287-7506 800-646-6636 Durango, CO 970-247-4460 Grand Junction, CO 970-243-7090

Idaho Falls, ID 208-523-9915 Salt Lake City, UT 801-262-7441 Ogden, UT 801-627-0049 St. George, UT 435-652-8003

Casper, WY 307-266-4474 Cheyenne, WY 307-316-9800 Gillette, WY 307-685-4288 Rock Springs, WY 307-382-5284