Southeast 11, June 2, 2021 by Construction Equipment Guide

Published Nationally ®

Southeast Edition

June 2 2021

$3.00

Vol. XXXIII • No. 11

“The Nation’s Best Read Construction Newspaper… Founded 1957.” 470 Maryland Drive • Ft. Washington, PA 19034 • 215-885-2900 • Toll Free 800-523-2200 • www.constructionequipmentguide.com

Inside

Sen. Lindsey Graham Visits Mauldin Paving Products...8

Linder Holds Groundbreaking Ceremony in Ft. Meyers...12

The Florida Department of Transportation is working on one of the biggest construction projects in Tampa Bay history: The Gateway Expressway. The two-part project consists of constructing two new twolane elevated tolled roadways that will provide direct connections between U.S. 19 and I-275 and between the Bayside Bridge north of 49th Street North and I-275 in Pinellas County, according to Kris Carson,

By Lori Lovely

CEG CORRESPONDENT

Transportation Biz Brings 30-Year Expertise to Niche Service...50

FDOT District Seven communications manager. This elevated highway will be designated State Road 690 above 118th Avenue North between I275 and U.S. 19. The other part is a raised highway in the median of SR 686 from 118th Avenue North to the Bayside Bridge. The Gateway Expressway project has been designated a priority project to improve traffic flow in Pinellas County. The new roadway is expected

Table of Contents ..............4 Attachments Section ............ .....................................33-37 Aggregate and Recycling Section .........................41-49 Truck & Trailer Section ....... ....................................50-52 Business Calendar ............66 Auction Section ..........70-73 Advertisers Index ............74

Falling Through the Cracks Holes On Job Sites Can Sometimes Be Overlooked Safety Hazards By Lucy Perry CEG CORRESPONDENT

Deaths from falls lead fatalities in construction. Construction workers just as often die from fall-through hazards as they do from work at elevations. In 2018, OSHA logged the preventable deaths of 320 workers. This year OSHA’s National Safety

Stand-Down to Prevent Falls in Construction showcases the critical need for safety precautions both around holes and at height. Holes are defined by OSHA as gaps or spaces in a floor, roof, horizontal walkingworking surface, or similar surface at least 2 in. at its smallest dimension. see CRACKS page 22

see GATEWAY page 26

Page 2 • June 2, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

NORTH CAROLINA Asheville 828.687.0620 Charlotte 704.596.8283 Greenville 252.754.5280 Raleigh 919.661.8710 SOUTH CAROLINA Local Dealer Piedmont L Local ld dealer l address dd 864.704.1060 000.000.0000 Columbia www.localdealerweb.xx 803.791.0740 Charleston Local Dealer 843.414.1120 Local dealer address TENNESSEE 000.000.0000 Kno oxville xville www.localdealerweb.xx 865.525.1845 Chattanooga Local Dealer 423.308.7940 Local dealer address 000.000.0000 GEORGIA www.localdealerweb.xx Buford 678.318.9500 Local Dealer Savannah Local dealer address 912.964.8079 000.000.0000 Macon www.localdealerweb.xx 478.200.3300 NORTH DAKOTA TA Local Dealer Local dealer address Williston 000.000.0000 701.577.1249 www.localdealerweb.xx Fargo 701.271.2360 Local Dealer Local dealer address 000.000.0000 www.localdealerweb.xx

DEALER LOGO Local Dealer Local dealer address 000.000.0000 www.localdealerweb.xx ascendummac ascendummachinery.c y.com . om .c Authoriz ed dealer for Volv Vhiner olvo Construction Equipment q p

UPP HIGH ORR ON T GROUND, THE W HAVE WE VE YOU COVEERED. ERED Volvo high-reach excavators meet the tough demands of demolittion with unprec unprecedented ed po powe er,, prot protection and reach. And with w factory-fitted y fitted guarding and oth her demolition-ready features, our complete crawler lineup c can easily tackle cleanup safely and a efficiently. High or low, all Volvo excavators come with a Lifetime Frame F and Structu ure Warranty, so you can confidently handle whatever tomorrrow throws your way.

Contact local Ascendum location toto Contac ct your yyour our loc al [[Dealer Dealer Name] location tolearn learnmore moretoday! ttoday! oday!!

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 2, 2021 • Page 3

Page 4 • June 2, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Sen. Lindsey Graham visited the Mauldin Paving Products manufacturing facility in Greenville, S.C., to discuss President Biden’s proposed $2.1 infrastructure bill designed to build better, safer roads and bridges nationwide.

ARDOT FIRES INSPECTOR FOR IGNORING BRIDGE CRACK

An inspector with the Arkansas Department of Transportation (ARDOT) who checked the 48-year-old I-40 bridge in 2019 and failed to discover the crack, has been fired and may face criminal charges.

HIRING REMAINS BIG BUSINESS CHALLENGE FOR STEEL ERECTORS

In January, the Steel Erectors Association of America surveyed its members regarding the business challenges they face. More than 40 percent of those responding said that hiring issues are currently their biggest challenge.

LINDER HOLDS GROUNDBREAKING CEREMONY IN FT. MYERS

A group of Linder Industrial Machinery staffers converged on a piece of property in Ft. Myers, Fla., on May 18 for the official groundbreaking of the company’s newest facility.

K-TEC, SOIL CONNECT PARTNER TO PROMOTE EFFICIENT EARTHMOVING

Soil Connect and K-Tec Earthmovers are working together to promote responsible and efficient earthmoving and material transportation practices across the United States.

JCB ANNOUNCES DIESEL MECHANIC APPRENTICESHIP PROGRAM

JCB North America announced the creation of a diesel mechanic apprenticeship program that comes with a $2,000 signing bonus for eligible new hires. JCB is looking for talented and ambitious team members.

YANMAR WELCOMES FIVE NEW DEALERS IN FOUR STATES

The new dealers will offer Yanmar’s powerful, dependable and efficient compact excavators, tracked carriers and wheel loaders. This includes the SV40 compact excavator, designed specifically for the North American market. Founder, Publisher & CEO Southeast Publisher Executive Publisher Editor In Chief Senior Editor Editorial Assistant Contributing Editor Editorial Consultant Production Mgr. Controller Circulation Mgr.

Edwin M. McKeon Sr. Richard C. McKeon Teddy McKeon Craig Mongeau Robby Chakler Katherine Devlin Eric Olson Pete Sigmund John Pinkerton Judith Nixon Cathy Printz

www.constructionequipmentguide.com

Facebook

Twitter

GETTING CONNECTED TO RIDE-ON TRENCHER ATTACHMENTS

YouTube

YODER & FREY HEADS TO KISSIMMEE, FLA., FOR MAY AUCTION

From digging a trench for utility installation to a variety of landscape, hardscape and construction-grade tasks, ride-on machines are the easiest and most affordable solution for construction professionals.

Yoder & Frey was back at its Kissimmee, Fla., auction site on May 19. A great turnout of “regular” Yoder & Frey attendees and Southeast contractors and dealers came out to bid on a terrific line up.

Working together for successful fleet management for a quarter of a century, JM Wood Auction and the Alabama Department of Transportation celebrated their 25th Annual Auction at the ALDOT fleet facility in Montgomery, Ala., in early May.

TRANSPORTATION BIZ BRINGS 30-YEAR EXPERTISE TO NICHE SERVICE REGISTRATION OPENS FOR GIE+EXPO 2021 AS OCTOBER EVENT RETURNS

Registration is open for GIE+EXPO in person this October. Both attendees and exhibitors have indicated they are eager to participate in the annual trade show, which is set for Oct. 20 to 22 at the Kentucky Exposition Center.

CAMPAIGN PUSHES FOR ECONOMIC GROWTH VIA INFRASTRUCTURE

The transportation construction, labor and business community are launching an ad and social media campaign to push for action this year by Congress and the Biden administration on a transportation infrastructure investment package.

DOOSAN BOBCAT DEVELOPS MOBILE TRAINING LAB TO MEET DEMAND

The lab is currently based in Litchfield, Minn., and will be traveling throughout Doosan Bobcat’s North America factory locations later in 2021 to bring comprehensive weld training to new and existing employees.

MEEKINS HOLDS RETIREMENT AUCTION FOR CURRIN BROTHERS

After 49 years in business, Currin Brothers has decided to retire, and hired Meekins Auction Company, in conjunction with Sound Heavy Machinery Inc., to sell the equipment at absolute public auction.

JM WOOD, ALDOT HOLD 25TH ANNUAL FLEET MANAGEMENT SALE

AGGREGATE PRODUCTION & RECYCLING SECTION

41 44 46

ROCKSTER IMPACTOR HELPS SUSTAIN HAWAIIAN PARADISE POWERSCREEN RESPONDS TO DECARBONIZATION CHALLENGE

ALTA ANNOUNCES FULL INTEGRATION INTO ALTA MATERIAL HANDLING

DEPARTMENTS

66 70

BUSINESS CALENDAR COMING AUCTIONS

FELLING Utility Pole Cargo Trailer

EQUIPMENT

Richard C. McKeon

Kent Hogeboom

Rich Olivier

• North & South Carolina • Tennessee • Virginia

National Sales Manager

• Alabama • Arkansas • Georgia • Mississippi • Tennessee • Florida

Cell e-mail

Advertising e-mail production@cegltd.com

Mobile

For advertising rates Contact

Main office 470 Maryland Drive Fort Washington, PA 19034 215/885-2900 Toll Free 800/523-2200 Fax 215/885-2910 Web site

SEN. LINDSEY GRAHAM VISITS MAULDIN PAVING PRODUCTS

Circulated Throughout • Alabama • Arkansas • Florida • Georgia • Louisiana • Mississippi • North Carolina • South Carolina • Tennessee • Virginia • Puerto Rico • Virgin Islands

To read these stories and many more, visit www.constructionequipmentguide.com

FEATURES

IN THIS ISSUE

SOUTHEAST EDITION

704/553-8888 704/726-1452 rmckeon@cegltd.com

Cell e-mail

Construction Equipment Guide Southeast Edition (ISSN 1058-6474) is published biweekly by Construction Equipment Guide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates. Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes to Construction Equipment Guide Southeast Edition, 470 Maryland Dr, Ft. Washington, PA 19034. Contents Copyrighted ©2021, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial

315/866-1423 518/221-5159 khogeboom@cegltd.com

Cell e-mail

770/443-3174 404/831-9526 rolivier@cegltd.com

material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication. Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 2, 2021 • Page 5

LOCATIO T ONS THROUGHO OUT FLORIDA Orlando 407.850.9614 Tampa 813.630.0077 7 Ft. Myers 239.481.8554 4 Davie 954.581.4744 4 Miami 305.477.2442 2

Find us online e at ALTAEQUIPMENT.COM

Lake City 386.758.7444 4 Jacksonville e 904.737 7..6000 0 Tallahassee 844.Go2.Alta

Page 6 • June 2, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

On today’s jobsite, precision is power. John n Deere SmartGrade™ Excavaators include a variety of graade-control options to give you the power of choice. Choose from integrated 2D guidan nce all the way up to SmartGrrade™ 3D grade control and hit h grade fas faster. Operators att every level of OLNH 9LUWXDO H[SHULHQFH ZLOO EH DEOH WR TXLFNO\ DQG FRQƟGHQWO\ DFKLHYH JUDGH ZKLOH DYRLGLQJ FRVWO\ UHZRUN 6PDUW U IH IHDWXUHV D U )HQFH DOHUW U V DQG 2YHUGLJ 3URWHFW KHOS JXDUG WKH PDFKLQH DQG GHVLJQ VX XUID UIDFH IR IRU DGGHG SHDFH RI PLQ QG $QG ZLWK WKH ƠH[LELOLW\ RI -RKQ - 'HHUH JUDGH PDQDJHPHQW VROXWLRQV upgrades are easy and ready when you are. Call C or visit us today to learn n more.

Adairsville,, GA..............770.773.9857 Albany, GA ...................229.888.1212 Andrews, SC.................843.221.4940 Atlanta, GA ..................404.691.9445 Aynor, SC .....................843.358.5688

Braselton, GA...............770.965.1889 Brunswickk, GA..............912.264.6161 Columbuss, GA ..............706.687.3344 Cuthbert, GA................229.732.2631 Dothan, AL A ..................334.794.8691

FlintEquipCo.com m

Grovetown,, GA.............706.855 G 5.5440 Ladson, SC...................843.572 2.0400 Macon, GA...................478.788 8.1586 Savannah, GA...............912.964 4.7370 Simpsonville, SC ...........864.963 3.5835

Troy, y, AL.........................334.566.4181 Valdosta, GA .................229.474.6680 Walterboro, SC..............843.539.1420 West Columbia, SC ........803.794.9340

IS S COM OMING G!

S tG Smar tGrad dee

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 2, 2021 • Page 7

LQWHJ U DWH G P DF KLQ H F R QWUR O IUR P WK H IDF WRU\

Comin ng Soo on

to a Jam mes Riverr Location n Near You! You! www.jamesriverequipment.ccom

John Deere 333G SmartGrad ade

struction the e al for Cons Laandscapers, John Deer 33 Ide and 33G CTL with Sma ar tGrade has Do ozer Mode and Integr a ted Gr ade & R Q W U R O , W ō V W K H Ɠ U V W & R P S D F W 7 U D F N / R D G H U W R I H D W X U H I X O O \

You our Comp pact Solution ST GO ST T SMAR T TER TER. JUS

Page 8 • June 2, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Sen. Lindsey Graham Visits Mauldin Paving Products “…construction has to be the meat and potatoes of any infrastructure bill.” Lindsey Graham U.S. Senator (S.C.)

By Eric Olson CEG CONTRIBUTING EDITOR

South Carolina Republican Sen. Lindsey Graham visited the Mauldin Paving Products manufacturing facility in Greenville, S.C., on May 17 to discuss President Biden’s proposed $2.1 infrastructure bill designed to, among other things, build better, safer roads and bridges nationwide. After discussing the issue with company owners and other South Carolina members of the Association of Equipment Manufacturers (AEM), Graham was given a tour of the plant before making brief remarks on the factory floor to Mauldin Paving employees and members of the media. “I have met with some Democratic colleagues, and I don’t think we can pass a $2 billion bill, but an $800 million to $900 million package that is tailored toward construc- South Carolina Republican Sen. Lindsey Graham visited the Mauldin Paving Products manufacturing facility in Greenville, S.C., tion,” he said. “I am all for building up our on May 17 to discuss President Biden’s proposed $2.1 trilhigh-speed internet capabilities, but con- lion infrastructure bill designed to, among other things, struction has to be the meat and potatoes of build better, safer roads and bridges nationwide. any infrastructure bill.” Graham added that he was “hopeful” Congress tory floor. The long-time U.S. senator from South would pass the infrastructure bill in the next 60 to 90 Carolina, one of the most powerful politicians in days. His belief is that it would generate a lot of eco- Congress, also asked questions during the meeting nomic activity for the United States and help the and listened to Calder’s concerns. The company has been a member of AEM for 30 years. country continue to recover from COVID-19. Glen Calder, vice president of operations of “If it does pass, it will be done on a bipartisan basis and if it does not, it would be a great missed opportu- Mauldin Paving, explained to Graham that Mauldin nity,” he remarked. “There are enough Republicans Paving produces a range of asphalt pavers, road mainwilling to work with Democrats to get this done if tainers, asphalt rollers, motor graders, truck mounted President Biden will sit down and work through the tank products and trailer mounted liquid asphalt/emulsion tanks from its expansive new facilidetails. He elicited cheers from the Mauldin Paving factory ty in Greenville. “We start with raw steel, then cut, bend, weld, paint workers, many of whom are machine assemblers and welders, when he said, “if we can pass an infrastrucsee MAULDIN page 64 ture bill, get ready for overtime.” AEM Members Discuss Issues With Graham The AEM has been working with Graham to put construction at the heart of President Biden’s infrastructure bill. Graham was invited to discuss the proposed legislation with executives at Calder Brothers Corp., the owner of Mauldin Paving, prior to his talk on the fac-

After discussing the issue with company owners and other South Carolina members of the Association of Equipment Manufacturers (AEM), South Carolina Republican Sen. Lindsey Graham was given a tour of the Mauldin Paving plant before making brief remarks on the factory floor to employees and members of the media.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 2, 2021 • Page 9

Hitachi 3.5 yd d3 ZW180-6 Wheel Loader Exceptionally durable and fuel efficient, this user friendlyy,, Tier IV Final machin ne offers improved digging capabilities over o previous models, easy maintenance m access, and a quick quic power switch for the heaviest load ds. Great for for road constr construction n, waste handling, and more!

NO DPF! D W When you need us, where re you need us

Sched dule a demo ttoda d d y!!

Equipment q pment • Parts • Service Ser

www.gsequipment.net sequipment.net

Tampa a 813-247-5168

Orlando 407-859-9160

Talla a hassee 850-5774-0892

Fort Myers 239-334-60663

Ocala 813-247-5168

Jacksonville 904-268-4400

Pompano Beach 9 954-327-8808

Page 10 • June 2, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

1809 Blue Clay Road Wilmington, NC 28405 (910) 782-2477

www.soundheavymachinery.com

CHANGE THE WA AY EVER E Y JOB GETS DONE. As a worldwide expert in designing and d producing premium, hard-working machinery, ASV gives operators the advantage they ey need to get more work done at every jobsite.

*Purchase an ASV machine between 4/1/2021 and 6/30/2021 and you’ll receive 0% financing for up to 60 months or bonus cash discounts up to $8,000. These are limited time offers available at participating and eligible dealers only. See a participating dealer for details. © 2021 ASV Holdings, Inc. For more information, visit ASVI.COM.

1809 Blue Clay Road Wilmington, NC 28405 (910) 782-2477

www.soundheavymachinery.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 2, 2021 • Page 11

NEW N EW W or

US SED

Rent - Parts - Service Get 0% F Financing on NEW Case CTLs & C Serries Mini Excavators* USED EQUIPMENT SPECIALS!

2018 CASE 650L LGP, 21505 2015 CASE 586H, 4WD, 15' 2016 CASE 580SN, STAN2018 CASE TV380, 84'' LOW Hours, 120'' DOZER BLADE, MAST, ROPS, 48" PALLET DARD HOE, ROPS, PILOT PROFILE BUCKET W/ BOE, ET0612....................$67,000 FORKS, 5,015 hours, ET0089 CONT, 2350 hours, ET0530 .. 800 Hours, ET0772 .............. ................................$44,000 ................................$47,000 ................................$50,000

2015 CASE 621F, 3.0 CUYD JRB QC TYPE, CLOSED CAB, JRB 416 STYLE HYD, 3650 Hours, ET0261 ........$92,000

2016 CASE SV212, 284" SINGLE DRUM RIDE-ON ROLLER, 1380 Hours, ET0845....................$57,000

2016 CASE 850M WT, CLOSED CAB A/C, 28" TRACKS, 120 BLADE, 3000 Hours, ET0726 ........$87,000

2016 CASE CX350D, CAB A/C, 13'-3" ARM, STEEL TRACKS, 3500 Hours, ET0715..................$192,000

2015 TEREX TA300, 5500 Hours, ET0970 ......$152,000

2018 CASE CX80C, CLOSED CAB, A/C, RUBBER TRACKS, 650 Hours, ET0769 .............. ................................$90,000

2015 CASE CX210C, 8" ARM, 2017 CASE CX350D, 213' 3'' Equipped with Double Acting ARM, 2700 Hours, ET0738 .. Auxiliary Hydraulics, 5000 ..............................$237,000 Hours, ET0264 ........$92,000

Miami

Jacksonville

West Palm Beach

Tampa

Fort Myers

Orlando

12601 W. Okeechobee Rd Miami, FL 33018 (877) 971-7070

9235 Bush Drive North Jacksonville, FL 32218 (904) 516-5380

1150 Barnett Drive Lake Worth, FL 33461 (561) 296-9710

1504 Tampa East Blvd Tampa, FL 33619 (813) 341-4646

3051 Hanson Street Ft. Myers, FL 33916 (239) 690-0661

9481 Boggy Creek Road Orlando, FL 32824 (407) 888-0024

www.TrekkerGroup.com

Page 12 • June 2, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Linder Holds May Groundbreaking Ceremony for New Ft. Myers Facility A group of Linder Industrial Machinery staffers converged on a piece of property in Ft. Myers, Fla., on May 18 for the official groundbreaking of the company’s newest facility. The 10-acre parcel of land for construction of this branch sits between Alico Road and Supply Drive with access to I-75. The site contractor of the project, Lee-Mar Construction based in Ft.

(L-R): Joe DeOreo, Heith Draper, Vincent Aguayo, Tom Bauers, Ray Henry and Louis Escobar will be instrumental in the success of the future Linder Industrial Machinery’s Ft. Myers, Fla., branch facility.

Myers, plans to have the facility ready for occupancy in the first quarter of 2022. Linder’s Southwest Florida region manager, Vince Aguayo, said that “Lee-Mar Construction is an existing Linder customer and we’re excited for them to get this job started and completed. This branch has been a long time in the coming.” With construction goods and materials being in high demand, the contractor for this project is holding the 50,000 yards of fill material needed to get the job under way quickly. Structural steel for the facility is in storage at another location and is ready and waiting for the slab to be poured for the 22,000 sq. ft. building. At the time of the groundbreaking, utility work was scheduled to get started at any given time. “We’re excited to be able to support our customers in the fashion that they expect to be supported,” Aguayo said. “Once the facility is complete, we’re looking forward to growing and expanding our work force in this area. The staff that is in this area already does a great job down here and we’re pleased to add a facility to support them with a full shop of technicians. We can’t wait till this is completed.” The full-service Ft. Myers branch will provide sales-service-parts-rentals for the entire Linder Industrial Machinery product line. 

The honors of turning the first ceremonial shovel of dirt for construction of the new Ft. Myers location was given to Linder’s Vince Aguayo (L), VP, southwest Florida region, and Tom Bauers, VP, Florida division.

Hiring Remains Big Business Challenge for Steel Erectors In January, the Steel Erectors Association of America surveyed its members regarding the business challenges they face. More than 40 percent of those responding said that hiring issues are currently their biggest challenge and 37 percent of them believe hiring will continue to be a problem over the next three years. Closely related to this issue is business growth, which is hindered by the inability to hire enough people with the right skills. More than 18 percent of member respondents currently face business growth challenges with that number expected to increase over the next three years. Meanwhile, having craft training in place to support new and existing personnel is the third biggest concern, although SEAA members feel their craft training needs will improve by 2024. “SEAA has successfully been growing its Ironworker Craft Training program over the last eight years. We currently have nearly 30 members participating in the program with more joining all the time,” said Geoff Kress, president of SEAA. “In addition, we have launched an aggressive video production schedule to create about 20 short training videos by the end of the year. These videos align with the SEAA/NCCER ironworker training curriculum.” In addition to SEAA’s job board, which is free for members but available to anyone, SEAA will explore additional resources to assist members with hiring challenges, added Kress. One noteworthy result of the survey — a whopping 74 percent of members who responded say they would recommend SEAA to a friend or colleague. “SEAA provides critical networking and training resources for both open shop and union erectors, fabricators, and general contractors,” said Jack Nix, membership committee chairman. For more information, visit www.seaa.net. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 2, 2021 • Page 13

Wel e l Rou unded d. www.wiirtgen-group.com/tec chnologies

CLOSE TO OU UR CUSTOMERS

Call y your our L Local Power Bra anch for More Informa nforma ation tion. Chattanooga (423) 894-1870

Kingsport (4 423) 349-6111

Knoxxville (865) 5777-5563

Memphis (901) 346-980 00

Tupelo (662) 869-0283

www.P w.PowerE EquipCo.com

ADVAN NCE OF A

Subject to cred e it approval

WOR RLD LE EADER

Page 14 • June 2, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

The W Wor orldwide e Leader in Concrete Paving T Technolo echnology

ww ww.gomaco.com m ❘ info@gomac o co.com GOMACO offers the full range of concrete slipform p pavers, curb and d gutt tter machiness, placer/sp er/spreaders, texture/cure machines and bridge/ idge/canal finishing equipment. GOMACO equipment features our exclusive and proprietary G+ G ® control system, created in-house by our soffttware engineers from the wants and needs ds of contractors paving in the field. At the heart of GOMACO equip fie pment is our passion for concrete and our commitment to our customers. We look fo forward to visiting with you about your upcoming paving projects and your concrete paving equipment needs.

CAROLINA CAT

BLANCHARD MACHINERY

GREGORY POOLE

Serving Western North Carolina (800) 277-2080 CarolinaCat.com

Serving South Carolina (844) BLANCHARD (252-6242) BlanchardMachinery.com

Serving Eastern North Carolina (800) 447-3112 GregoryPoole.com

I-85 Exit 74 (Julian Rd. Exit)

Walt Reddick (336) 749-4661 Taylor Johnston (704) 746-1496

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 2, 2021 • Page 15

Salisbury, NC (704) 630-4994 (800) 665-6532

2013 International Terrastar 11' Cab and Chassis, Maxxforce 7 Engine, 300 HP, 145K Miles, Automatic Transmission, 158" Wheelbase, 82" Cab to Axle, 19,500 GVW, Non-CDL, Hydraulic Brakes, Cruise, Power Locks & Windows, Power Mirrors, AM/FM CD, AC (#5667)...... ....................................................$17,500

2012 Freightliner M2 28' x 102" Jerrdan Rollback, ISC Cummins, 211K Miles, 9 Spd, 300 HP, #19,220 Front Axle, Cruise, Inter-Axle Lock, Air-Ride, Susp Dump, Double Frame, Tool Boxes, Winch, Pintle/Ball Hitch, Air-Ride Cab, Wood Floor on Bed, AM/FM CD, AC (#5662) ................ .................................................... $73,500

2014 Peterbilt 386 Tandem Daycab, ISX Cummins, 450 HP, 312K Miles, 13 Spd, 220” WB #58,000 GVW, 46,000 Rears, Jake, Cruise, Headache Rack, Dual Wet Kit, Air-Ride, Headache Rack, Diff. Lock, Full Locking Diff Forward and Rear Drive Axles, Air-Ride Cab, Susp Dump, Power Windows & Locks, AM/Fm CD, AC (#5726) $74,900

2013 Mack CXU-613 Tandem Axle Daycab, MP8 Mack, 480K Miles, 415 HP, 10 Spd, Dual Wetline Kit, 194" WB, Aluminum Headache Rack, Jake, Cruise, Air-Ride Susp, Susp Dump, Tilt/Tele, Diff. Lock, ATC, Saddle Box, Aluminum Wheels, AM/FM CD, AC (#5719) ............ $34,900

2003 Moffett M5500 Piggyback Forklift, Kubota 4 Cylinder Diesel Engine, 3,211 Hours, 5,500lb Lift Capacity, 24” Load Center, Stabilizers, Side Shift, Tilt, 48” x 6” Forks, 5,880lb Unladen Weight (#5461) .... .................................................... $14,900

2016 Peterbilt 348 Tandem Axle 26' x 102" Hercules Aluminum Box Truck w/ Fluid Transfer Pump (Petroleum), Paccar PX-9, 256K Miles, 330 HP, Allison Auto. 3000 RDS-P Trans, Exhaust Brake, Diff. Lock, Air-Ride, Susp Dump, Cruise, Tilt/Tele, 4,000lb Liftgate, Roll-Up Door, Curbside Door, Wood Floor, 2 Rows E-Trac, Liquid Contols M-7-1 Pump w/ Hose and Reel, Transfer Hose in Box, Alum Wheels, AM/FM CD, AC (#5679) ...... .................................................... $69,900

2013 International Durastar 13’ Cab & Chassis, Engine Has Miss and Smokes Suspect Rings are going out, Maxxforce 240 HP Engine, 117K Miles, Auto. Trans. w/ O/D Non-CDL, 175” Wheelbase, 108” Cab to Axle, Spring Susp, S-Cam Air Brakes, Cruise, Tilt, Diff Lock, Power Locks and Windows, AM/FM CD, AC (#5475).............. ..........................................$11,900 OBO

2012 Freightliner M2 28' x 102" Ledwell Tandem Rollback, 2ISC Cummins, 350 HP, 208K Miles, Auto. Trans., #18,000 Front Axle, Air-Ride, Wood Floor, Winch, Double Frame, Pintle/Ball Hitch, Cruise, ATC, Susp Dump, Diff. Lock, AM/FM, AC (#5641) ....................$67,500

2012 Freightliner M2 28' x 102" Jerrdan Rollback, ISC Cummins, 300 HP, 289K Miles, 9 Speed, Winch, Cruise, Inter-Axle Lock, Air-Ride, Susp Dump, Tool Boxes, Pintle Hook, #19,200lb Front Axle, AM/FM CD, AC (#5557) ............ $62,500

2012 Freightliner M2 28' x 102" Jerrdan Rollback, ISC Cummins, 350 HP, 258K Miles, 10 Spd., Wood Floor, Winch, Double Frame, Pintle/Ball Hitch, Tool Boxes, Air-Ride Cab, Cruise, Diff. Lock, Air-Ride, Susp Dump, Alum Outside Wheels, AM/FM CD, AC, #59,840 GVW, #19,840 Front Axle (#5637)........ $67,500

2012 Trail-King TK80-482 48' x 102" Sliding Axle Tilt Trailer, Wood Floor, Conc. Load Rating of 50,000lbs in 10', 38' Bottom Deck, 10' Top Deck, Warn Winch, Air-Ride Suspension, Suspension Dump, 40 Ton Capacity (#5558) ................ .................................................... $44,900

2012 Freightliner M2 28' Jerrdan Rollback, ISC Cummins, 300 HP, 247K Miles, 9 Spd, Double Frame, Wood Floor, Ramsey Winch, #19,220 lb Front Axle, Tool Boxes, Cruise, Air-Ride, Air-Ride Cab, Inter-Axle Lock, Susp Dump, AM/FM CD, AC (#5589) ................................ $67,500

2012 Freightliner M2 28' x 102" Jerrdan Rollback, ISC Cummins, 350 HP, 200K Miles, 10 Spd, #19,840lb Front Axle, Wood Floor, Cruise, Alum. Outsides, Diff. Lock, Air-Ride, Susp. Dump, Air-Ride Cab, Double Frame, Ramsey Winch, Tool Box, Pintle/Ball Hitch, 4.78, AM/FM CD, AC (#5688) ...................................... $73,500

2012 Freightliner M2 28' x 102" Jerrdan Rollback, ISC Cummins, 229K Miles, 350 HP, 10 Spd, Winch, Cruise, Diff. Lock, Air-Ride, Air-Ride Cab, Suspension Dump, Double Frame, Pintle/Ball Hitch, Wood Floor, Alum. Outside Wheels, #19,840 Front Axle, AM/FM CD, AC (#5625) ...................................... $69,900

1982 Peterbilt 359 Tandem Axle, Great for a Restoration Project, NTC Cummins, 350 HP, Jake, Corvette Dash, Eaton Fuller Trans., Diff. Lock, Wetline Kit, 220" WB, 128" CA, Dual Vertical Stacks, Air-Ride, LP 24.5 Non Piloted Wheels, AM/FM, AC, Selling As it Sits, Assume Non-Runner (#5702) .................... $9,900

2011 Princeton PBX Piggyback Forklift, Kubota 2403M NA 4 Cylinder Diesel Engine, 2,600 Hours, 5,000lb Capacity, Stabilizers, Side Shift, Traction Lock, Park Brake, Tilt (#5584) .... $24,900

2012 Trail-King TK70CF-352 35' x 102" Flatbed w/ Piggyback Forklift Setup, Wood Floor, Conc. Load of 50,000lbs in 10', Sliding Ratchets and Straps, Tool Box, Crank Landing Gear, 5' Headboard, 11R 22.5 Tires (#5587)............ .................................................... $19,900

2012 Freightliner M2 28' x 102" Ledwell Rollback, ISC Cummins, 350 HP, 247K Miles, Allison 3000RDS Automatic, Winch, Wood Floor, Cruise, Double Frame, Tool Box, Pintle/Ball Hitch, Cruise, Tilt/Tele, ATC, Diff. Lock, Air-Ride, Susp Dump, #18,000 Front Axle, AM/FM, AC (#5568) ..................................$64,900

2013 Towmaster T-14DT Tilt Deck Gooseneck Trailer, 22' Deck, 18' Tilt Deck, 81" Wide, Wood Floor, 12,000lb Buyers Electric Winch, 30' Total Length, Crank Landing Gear, Aluminum Wheels, Electric Brakes, #19,100 GVW (#5593) ...... ......................................................$6,500

2012 Freightliner M2 28' x 102" Jerrdan Rollback, ISC Cummins, 300 HP, 245K Miles, 9 Spd, Wood Floor, Diff Lock, Air-Ride, Susp Dump, Cruise, Winch, Air-Ride Cab, Double Framed, Reese, Tool Boxes, #19,220 Front Axle, AM/FM CD, AC (#5505) ...................................... $67,500

www.HammerTrucks.com

Page 16 • June 2, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ARDOT Continues Investigation, Fires Inspector for Ignoring Bridge Crack

Arkansas Department of Transportation photo

This photo, pulled from 2019 drone footage according to the Arkansas Department of Transportation, shows the fracture as it appeared at the time. Subsequent photos taken in 2021 show the fracture had expanded and caused extensive damage to the beam.

As the investigation continues as to why a significant beam fracture occurred on the I-40 bridge across the Mississippi River, an inspector with the Arkansas Department of Transportation (ARDOT) who checked the 48-yearold structure in 2019 and failed to discover the crack, has been fired and may face criminal charges. ARDOT officials announced the inspector’s dismissal May 17 at a news conference in Little Rock, according to WMC-TV in Memphis. The Arkansas agency noted that the employee who inspected the bridge in 2019 and 2020 was not using proper protocol and failed to “carry out his responsibilities.” ARDOT Director Lorie Tudor said the incident proved negligence in “the inspection process” and the crack “should’ve been discovered in 2019.” Tudor added that her department will reinspect the I-55 bridge, too, which now serves as the main carrier of traffic between eastern Arkansas and southwestern Tennessee. At 72 years old, the Memphis-Arkansas Bridge is much older than the I-40 bridge, and it is currently jammed with car and truck traffic due the closure of the younger structure. In addition to increasing its hands on inspection, ARDOT has purchased a drone to help in the process. According to both state DOTs, repairs on the 9,432-ft.-long Hernando de Soto bridge, built with six lanes for I-40 vehicular traffic, will be accom-

plished in two phases. • Phase 1 require steel plates to be installed on both sides of the fractured beam to provide stability. The Tennessee Department of Transportation (TDOT) estimated the fabrication of the 11,000-lb. beams would be completed by May 19, • Designs for Phase 2 are currently under way and will be finalized with a selected contractor in the coming days. WMC Action News 5 reported that TDOT discovered that the fracture impacts 100 percent of the outboard plate, 100 percent of the top plate and 20 percent of the bottom plate. The TDOT oversees repairs on the bridge and its design team is considering using steel rods over the damaged area until the damaged 37-ft. of beam can be replaced. Meanwhile, the bridge remains closed indefinitely while transportation officials from both states determine if it

Arkansas Department of Transportation photo

Inspectors measure a significant fracture in one of the critical support members of the Hernando de Soto I-40 bridge in May 2021.

is safe to resume vehicular traffic and continue working on a plan for repairs. The I-40 bridge closed May 11 when a routine inspection that day uncovered the fracture in a support beam in the bridge’s truss, but in the days since, videos and photos have surfaced showing that the crack may have been present even earlier than the 2019 inspection. A local drone enthusiast searched his video archives and discovered he has a 2019 image of that damage, according to a report from the Memphis TV station. ARDOT confirmed an inspector’s drone video from May 2019 showing the same damage, but the agency declined to release the inspector’s 2019 drone video, WMC Action News 5 reported. ARDOT explained that over time, climate and the weight of traffic can expand cracks in bridges; however, the department is unsure if the fracture was as significant in 2019 as it is in 2021. In one piece of good news, although drivers cannot cross the river and must use the I-55 crossing 3 mi. to the south, barge traffic under the bridge has resumed on the Mississippi River. Nebraska-based Kiewit Construction, the same group working on the $81 million Cantrell Road widening project in West Little Rock, Ark., has been selected to make the needed repairs on the I-40 bridge repair, an ARDOT spokesperson confirmed to the Memphis TV station. 

K-Tec, Soil Connect Partner to Promote Efficient Earthmoving Soil Connect and K-Tec Earthmovers are working together to promote responsible and efficient earthmoving and material transportation practices across the United States. In order to bring awareness to the common pitfalls and inefficiencies faced by today’s dirt movers, the companies have agreed to work together to educate the earthmoving industry through multiple cross-promotional channels about new technologies and best practices. The companies also have discussed the integration of Soil Connect’s eTickets system into K-Tec’s new scraper telematics portal dashboard. “K-Tec is a heavy equipment manufacturer that is constantly on the cutting edge of technology,” said Cliff Fetner, founder and CEO of Soil Connect. “I see many parallels between our businesses, as we are often working with the same contractors that move lots of dirt, have excess dirt, or need more dirt on their job sites. Our marketplace is able to connect these hardworking professionals to make their lives easier.” “Soil Connect continues to develop revolutionary technology that is disrupting the dirt world and challenging old, inefficient methods of daily tasks,” said Mike Palitsky, president and CEO or K-Tec Earthmovers Inc. “Likewise, K-Tec’s scrapers have proven to be more efficient than traditional forms of earthmoving. We believe that working together progresses our mutual goal to advance earthmoving technology in the USA, which will benefit both of our organizations — as well as the entire industry — now and for the foreseeable future.” For more information on Soil Connect, visit www.soilconnect.com. For more information on K-Tec Earthmovers, visit www.ktec.com. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 2, 2021 • Page 17

563-8 872-44112 112

Bellevue (Dubuque), ubuque), Iowa sales@jjscheckel.com jscheckel.com

2002 CA ATT D11R - $1855,000

2009 CA ATT D10T - $468,000 $ ,

2005 CA ATT D10 D10TT - $348,000 $ ,

7PZ High g Horse series, Runs R andd oper p ates a to spec p , RJG S#, 1 Owner since new w,, 8,3000 hours h on $683,000 $ U Blade, SS ripperr,, NNew rodd & main bbearings g installed. bl d w// twin tilt, SSS ripper ipp r.. A/C ld use Documented CAT kpile il machine hi U-blade A/C, HHeaat. Could AT Dealer D Complet p e Rebuild, SS ripper pp r,, Track ggroups p near new. Easy E y dduty stockp paint, otherwise very straight Twin tilt, tilt Well maintaine i i ed, Clean, Good frrom om multina multinational i h tractor from good home. U blade, Twin G d U/C. U/C l i i l ccompanny. AAs nice i as they h come!!

RENT OR

BUY!

2019 CA ATT D6 LGP - $348,000 $3448,000 ,

2,510 Hours, Next GGen, 2 Year Year PPowertraain Warranty, W y, GPS Readyy,y, In Integr g ated Slope Grade Assist, MS Ripper Ex i r,, Excellent E ll conditio d on.

RENT OR

BUY!

2013 CA ATT 329EL - $114,000 $1144,000 ,

loaded, Longg and Wide UC, Pattern changgerr,, Ex Excellent ll

condition, OOriginal paint. Rent/Lea /L se or Buy.

2013 CA ATT D9T - $618,000

5,250 Hours, 517 hrs aat idle. dl U Blade, l d MS Ripper pp r,, GPS Grade control reaadyy. Original paint, straigh ght & clean. Documented main maintenancee andd oil sample l history.

RENT OR

BUY!

2006 Komatsu PC800LC-8 - $33 $338,000 , 2012 CA ATT D6T XW VP PA AT - $149,000 AT , 2012 CA ATT D6T LGP VP PAT - $139,000 , 2018 CA ATT 390FL 390FL, L,, A02819 - $628,000 , 6,250 Hrs, 1,472 idle, ARO CAT AT Acc A cugr g ade d GPS RReady d . 8,500 Hours, 2,700 at idle. CCAT AT Acc A ugr g ade d , AROO, O, GPS 5,780 Total Totall hhrs, hrs 1,5500 aat idl idle. 2 Year par p ts/labor /l b CCat bll d . Straight S ih ight. 27’’ BBoom, Erops, A/C, Diff Steerr,, VPAT AT 6-w 6-waayy blade readyy. Erops p , A/C, Diff steeerr,, GGoodd undercarriage g . Warrantyy remains. 1 Ow wnerr.. Super p straigh and clean. Rent/Leasee or Buy Original, ne. Rent/Lease or BBuy. 14’’ Stick S k, 77”” Bucket, B AAux hydraulics, B y.. i l super clean machine d li EExcellent U/C.

RENT OR

BUY!

4,700 Hours, New 54”” bucket bbuckk , 10’6” ’ ” SStick, k Fullyy

2004 CA ATT D10T D - $350,000 $ ,

RJG Series, 23,037 hours ours, 4,701 idle dl hours, h Single S shank ripper pp r,, U blade de with ttwin Tilt. A/C, Heat. CAT AATT dealer main ned, Serviced and ready to go. d l maintain

BUY!

2014 CA ATT 988K - $$338,000

9,417 Original g hrs, 2 Year Yearr, FFactoryy Powertrain Warranty remains. i RRide id control. 10 Yard spppade nose bucket, Straight, clean, fully testedd anndd ready d to go!!

(2)2015 ) Volvo A40G G - $228,000 $ , EA. Matching M hi g ppairr,, 6,100 HHouurs, Tailga lg tes, Excellent E ll rubber reputation trucks with full bb r,, 1 Owner O documentedd history.

RENT OR

7,200 Original g hrs, Reputa p tion machine, Straigh g t, 10”” SStick i k, 72”” Bucket, clean, original gi l. 11’10” B Goodd U/C w/ 32”” tr trackk pads. d KKomatsu dealer tested & inspected.

RENT OR

BUY!

2014 CA ATT 740B 7 - $218 $218,,000

7,600 Hours, 2,483 aat idle, Original g ppaint, Service history,y, Oil samples p , Full workk order p ed. d complet W k reeady. Rent/Lease or Buy. Buy Goodd tires, Work

(3)2011-2014 ) 1-2014 CA ATT 740B’ 740B’s $168 168,,00 000 - $$178,000 , EA.

11,500 Hours, DDeealer maintained, d Service S hhistory,y, Oil O samples, Full woork order done. Good tires, Tailgates.

RENT OR

BUY!

Holmes 30T Dump p Wagon g - $45,000 $ ,

2015 C CA ATT 836K - $458,000 $

2008 C CA ATT C CP5 CP56 56 - $89,000 $ ,

B POWERTRAIN PLUS REBUILDS

HIGH REACH CONVERSIONS

HOLMES SMOOTH DRUM ROLLERBLADES

2018 CA CATT RM RM500B M500B - $580 $580,000

2016 CA CA ATT 627K - $$478,000

FFabricated b d ffrom usedd articulatedd dump d p truckk chassis. h 1 Year Year factory fac y Warrantyy remainingg, g 8,275 Total Totall hours hours, 84”Vibratoryy ppad foot, 2,585 85 Hrs Hrs, Enclosed l d Cab, A/C, 978 Hours. Remaining 2 year par p ts/service factory 5,070 Hours, Push/Pull, Erops, A/C, 33.25+29 Rubberr,, Hyydraulic brakes, Standard bbullll hi hitch with 360° 2,937 at idle, onlyy 5,338 p ation. Service Fron ront blade option, p i Origina g l paint, Veryy well maint’d, Cat Warrantyy. 1 Own 3388 hhours iin oper Original g ppaint,t Full documented history,y, Under O ner machine, hine Universal rotor oscillation, HD Jack stand, Good tires, very nice unit. history since new. Excellen feet. CClean, ready g Rent/Lease or Buy. ill E ll t feet l ready to work. Fully l SServici edd & ready d tto go. R d l care since new, will not disappoint! dealer for both Asphalt RReclamation or Soil Mixing.

NEW! Ready to ship!

2006 CA ATT D10T Rebuild In n Process - $885,000. Zero hour Powertrain Plus, OEM CAT Warranty. New undercarraigge g , U Blade, SS Ripperr,, Pre-emissions! Available M March/2021

2017 CA ATT 349FL UHD D - $$458,000 , Holmes 11F - $23,00 , 00 / 16F - $29,000 $ 2015 Screen Machine JXTT Crusher 2017 Screen reen Machine 514TS3 Zero hours on custom Ultr Ul a-High H gh Reach R h Demolition l 2 Models, 11’ or 16’’ cuttingg width. Made in Iowa. - $$288,000 , Mobbile Jaw Crusherr,, 1,800 1, HHours,, Spyder py - $189,000 $189,000 , Triple p Deck Mobile Screen Conversion. 96’6” ’ ” Totall reach, u k attachh boom b & h Quick llines, Hyddraulic l tiltl cabb, High H hest qualit l y pkkg.

visit

Construction gr g ade d , extremee dduty. For hhaull road roadd & site 26” 6”” + 45”” Ja J w size, 3766 HP CAT C9.3 Engggine, Capable p lleveling l , compacting & sealil ng ddir di t prior to rain event. of crushed concrete oor rock. As nice ass they h come!!

JJSccheckel.com

and w watch our new company video! deo!

Pl 1,760 hours Plant, urs, prroduc oduc d es 4 product d sizes, with a 5th scalped oversize productt on the loading grizzly.

The fastest growing w choice for

Large Equipm ment Rental

Delivered Nationwide.. We are easy to work with & will not be beat at on price and terms! Large Dozers - Cat D8T,T, D9TT,, D10TT,, D11T Large Excavators - Cat 374FL, L, 390FL Truck Fleet - Cat 740/745, & Volvo A40G Compaction, Wheel Loaderss, and much more.

WE OWN WHA ATT WE W ADVERTISE!

call: 5663 63-872-4112 872 4112 | email: sales@ @jjscheckel.com | www. jjsscheckel.com scheckel com | follow us for forr daily updates:

Page 18 • June 2, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Hyundai leads the industry with great warranties and a trusted dealer network that will support you.

Southeast Border Rents borderequipment.com Augusta, GA 706-737-7253 Norcross, GA 770-609-8299 Century Equip Rental centuryeq.com Dyersburg, TN 731-285-2875 Crosby Equip Co., Inc. crosbyequipmentco.com Douglas, GA 912-384-4664 Macon, GA 478-257-8300 Diamond Equip, Inc. diamondequipment.com La Vergne, TN 615-641-1100 Don Allison diamondequipment.com Arley, AL 800-669-6450 Earthmovers Construction Equip earthmoversfl.com Apopka, FL 407-401-8956 Fort Pierce, FL 407-401-8956 Tampa, FL 336-425-5235 Equip Resource Management equipresource.com N Little Rock, AR 501-223-8604

hceamericas.com

Grove River groveriver.com Richmond Hill, GA 912-756-7854 Highway Equip Co. highway-equipment.com Troutville, VA 540-992-4150 May • RHI mayequip.com robshydraulics.com Clayton, NC 919-773-1424 Grimesland, NC 252-752-1500 Lexington, NC 866-629-3784 N Benson, NC 919-243-0631 Rock Hill, SC 919-612-6300 Summerville, SC 843-501-0566 Columbia, SC 803-865-1002 Greenville, SC 866-629-3784

Mid South Machinery gomidsouth.com Gulfport, MS 228-867-1555 Jackson, MS 601-948-6740 Tupelo, MS 662-690-6553 Springdale Tractor Springdale, AR 479-361-2513 State Machinery statemachineryeq.com Kenner, LA 504-464-0431 Stone Equipment Co., Inc. stoneequipmentco.net Alabaster, AL 844-786-6373 Montgomery, AL 844-786-6373

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 2, 2021 • Page 19

THE HARDEST WORKING WARRANTY ON THE JOBSITE

5 YR 3 YR

With 3-year/3,000-hour standard coverage and 5-year/10,000-hour structural coverage, our machines are backed by the hardest working warranty around, and guaranteed to keep you up and running longer.

STRUCTURAL

STANDARD

*Limited lifetime warranty on the center pin.

hceamericas.com

Page 20 • June 2, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

JCB Announces Diesel Mechanic Apprenticeship Program

JCB is looking for talented and ambitious team members who have achieved or are currently pursuing their diesel mechanic certificate to join its diesel mechanic apprenticeship program.

JCB North America announced the creation of a diesel mechanic apprenticeship program that comes with a $2,000 signing bonus for eligible new hires. As part of JCB North America’s continued commitment to workforce development in the Coastal Region and following the success of the current manufacturing apprenticeship program, JCB is looking for talented and ambitious team members who have achieved or are currently pursuing their diesel mechanic certificate to join its diesel mechanic apprenticeship program. JCB North America manufactures skid steer loaders, compact track loaders and defense equipment, and markets a range of more than 300 machines via a network of more than 320 dealer locations throughout the United States and Canada. “JCB is excited to announce the formalization of our new diesel mechanic apprenticeship program,” said Tonya Poole, vice president of human resources of JCB North America. “As our business continues to grow in all areas, so has our need for specialized team members, and with the addition of the signing bonus, we feel JCB is demonstrating that commitment to hiring and retaining the very best talent in our area to provide our customers with the highest quality product in the industry.” JCB also will provide selected team members pathways within manufacturing to include design, testing and product support teams as the business continues to grow. The $2,000 signing bonus will be provided to team members that possess a diesel mechanic certificate upon hire and agree to an 18month employment contract. JCB offers competitive compensation and comprehensive benefits packages and is an equal opportunity employer and a drug free workplace. Applicants are required to submit to standard pre-employment screening. Interested applicants should send current resumes to jcbnaresumes@jcb.com and include Diesel Tech Apprenticeship in the subject line. For more information, visit www.jcb.com. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 2, 2021 • Page 21

Page 22 • June 2, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Industry Focuses On Crucial Need for Safety Precautions CRACKS from page 1

“Safety is a cornerstone of any good business in the construction industry,” wrote crane service company Crane Repair, Englewood, Colo. “A construction manager’s commitment to ensure safety for everyone who steps foot on a site is essential.” In a blog on its website the company offers tips for preventing fall-through incidents and injuries on the job. Noting many places a worker can fall through on a construction site, the crane repair company said that tripping hazards often cause fall-throughs. “Another hazard is any place on site with excessive noise,” the company said. “Excessive noise can make it hard for a worker to hear verbal warnings about a safety hazard from co-workers.” Crane Repair believes the first step to preventing falls on a job site is a thorough safety hazard inspection. That’s where OSHA comes in. The agency offers guidelines for inspections, including identifying load limits for each job site area, potential tripping hazards, unprotected edges and areas of excessive noise. “Another critical factor in workplace safety is worker training,” the company said. “Workers need to be kept up to date on OSHA safety requirements and your company’s policies regarding fall prevention.” The proper use of fall arrest systems must be taught to ensure that if a fall does happen, the system will stop it before the worker hits the ground. Crane Repair offers tips for preventing falls from hazardous hotspots across a construction site, including unprotected edges. “An opening in a wall or a hole in the floor can be a falling hazard if left unprotected.” To prevent a fall from an unprotected edge: • After creating an unprotected edge, immediately cover it or put up rope to protect it; • Keep areas with holes off limits; • Hole coverings must be able to support twice the weight of a worker and their tools or materials; • Do not carry materials that are big enough to block your vision. If you must do so, be sure your fall arrest system is securely in place; and • Keep the work area clean of clutter that could cause a trip. “Falls are a risk for every construction worker. But working to prevent them in these ways can minimize the chance of them happening on your job site,” said Crane Repair. Beyond Manholes Open manholes aren’t the only fallthrough hazard on a job site, according to David Gardner, construction safety consult-

Regardless of fall distance employees be protected from tripping or stepping into holes. If a hole is big enough to fall through, it must be covered, guarded or fall protection measures utilized.

ant of Simplified Safety. Unprotected holes in a floor, deck or roof can result in serious injuries as well if workers are unaware of or choose to ignore them. OSHA covers the rules for fall-through protection in 29 CFR 1926 Construction Industry Regulations, Subpart M. ANSI volume A10.18 Safety Requirements for Temporary Roof and Floor Holes, Wall Openings, Stairways, and Other Unprotected Edges in Construction and Demolition Operations addresses the hazards as well. Gardner believes both “are helpful in defining the standard-of-care for managing holes on construction sites.” In a Simplified Safety blog post, he offered a summary of industry safety regulations and standards for prevention of fallthrough injuries. • If you make a hole, guard it. Before cutting the hole, barricade the work area to keep people out. • If the hole must be open, and the fall distance is more than 6 ft., employees must be protected by use of a fall arrest system, guardrails or covers. • Any fall arrest system must meet OSHA criteria established in 1926, Subpart M. • A guardrail must be a minimum of 42 in. high, have a mid-rail and be capable of withstanding a 200-lb. load. “Toe boards are recommended at all times; they are required for work under the hole,” wrote Gardner. • If the hole is not guarded, it must be covered. The cover must support at least a 200lb. load. The cover must be larger than the opening, secured against displacement and properly labeled or identified, such as “Floor Opening Do Not Remove.” “If you have a

choice,” said Gardner, “make both the hole and cover round. An oversized round cover cannot fall through a smaller round hole.” • Never cover a hole with any type of nonsubstantial or non-weight bearing material(s) such as paper, cardboard or plastic. • Industry standards require that, regardless of fall distance, employees be protected from tripping or stepping into holes by covering the openings. “In layman’s terms, if a hole is big enough to fall through, then it must be either be covered, guarded or fall protection measures utilized,” wrote Gardner. “If it is a small hole that presents only a tripping hazard for example a 4-inch diameter hole for a pipe, cover it regardless of the fall distance below the hole.” Contractor’s Role It is the general contractor’s (GC) responsibility to assure all parties properly communicate with one another, and potential safety hazards are brought forth and discussed. “If you see something — say something.” Safety materials provider WeeklySafety.com notes that holes are one hazard area in which many workers forget to protect themselves and co-workers “or at minimum throw some caution tape up and call it good.” OSHA General Industry Standard 1910.28 states employees are to be protected from tripping or stepping into or through any hole less than 4 ft. above a lower level by covers or guardrail systems. Floor holes can be guarded or protected by guardrails, covers and other conventional fall protection methods, according to WeeklySafety.

• Walking and working areas and rooftops should be inspected for potential floor holes, including skylights. • Guardrails used around floor holes must meet specific construction guidelines to prevent falls to lower levels and erected on all unprotected sides or edges. • Body belts are prohibited and may not be used as part of a fall protection system. OSHA Construction Standard 1926.502(b) Guardrail Systems states that guardrails must have a top rail 42 in. high and strong enough to withstand 200 lbs. of force. Mid rails must be 21 in. high and strong enough to withstand 150 lbs. of force, and guardrail systems used at holes must be erected on all unprotected sides or edges of the hole. “When used to protect employees, hole covers must be able to support two times the weight of the employees, equipment and materials,” according to a WeeklySafety.com blog. Hole covers must be color coded or marked with the word “Hole” or “Cover.” OSHA Standard 1926.501 says that each employee on a walking/working surface must be protected from falling through and tripping in or stepping into or through holes. • Hatchways and chute floors are also considered floor holes and must have protection. • A hinged door may be used to prevent accidents involving hatches and chutes that may be located on industrial floors or roofs. • Removable railings should stay in place, even when the opening is not in use. • When materials are going into a floor chute, protection must be provided to prevent falls through the opening. “Never assume everyone will see the hole and step around it, or think that caution tape is enough,” said WeeklySafety. “A slip or trip near the hole can result in a serious injury or worse. Proper covers, guardrails and signage must be utilized on and near floor hole hazards.” When Fall-Throughs Happen When falls do happen, steps can be taken to decrease the possibility of extreme injury. Here are Crane Repair’s suggestions: • Cap all exposed steel rebar to minimize injury if a worker should fall onto it. • Require helmets at all times to protect against traumatic head injury • Use fall arrest systems to stop a fall in progress To further increase safety on your site, stay informed about the latest in worker safety, including OSHA’s resources for safety training. “Establishing and following thorough safety protocol helps keep everyone safe.”  CEG

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 2, 2021 • Page 23

Landsca apers We’v ve Got You Covered!

The only thing we love more than the beautiful weather is seeing your landscape projects are in full swingg! If your tree or landscape business is looking oking to grow or expand its services,, thenn let’s set up a demo and see about adding so ome power to your ¾IIX 2I[ ERH YWIH YRMXW EVI EEZZEMPEFPI EPSRK with attachments,, parts and a service HITEVXQIRX XLEX WXERHW VIEH] XS EWWMWX ]SY With our extensive rangge,, combined with KVIEX ½RERGI SJJJJIVW [EVVERXMIW ERH WIVZMGI support,, doing business with us is more than just a machine transaction, on,, it’s a dedicated TEVXRIVWLMT ; ;II GER´X [EMX XS WLS[ ]SY [LEX we’re all about! Units are in stock ck and ready to work. Give uss a call for a d demo t d ! today!

BRIGGS WWW.BRIGGSJCB GSJCB.COM 8215 Palm River Rd Tampa, FL 33619 Ta (866) 706-1995

Briggs JCB Customer: Mu ulch & More, e Jacksonville, FL

2755 Marshall Dr Tifton, GA 31793 (866) 586-4281

7551 Presidents nts Dr #104 Orlando, FL F 32809 (866) 620 0-5840

5566 6th Street W West est Lehigh Acres, FL 33971 (239) 458-5005

2525 Philips Hwy Jacksonville, FL 32207 (866) 554-6926

5511 E Shelby Dr 181 Riverbend Dr 1IQTLMW 82 2I[ 3VPIERW 0% (901) 795-7200 (504) 733-5640

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 2, 2021 • Page 23

Page 24 • June 2, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Powe erfu ul. Dependabl ep pen pe ndab dab ble. Relliable. No ow th hat’s a h rd-w har d workin king crrew.

Call Drew for Service & Brian for Parts.

Con nstruction Lineup

Durable Kubota engines e

704-233-4242 800-443-7569 Mon.-Fri. 7:30am-5:00pm Sat. 8:00am-12:00pm

Stop by for a closer look at our complete construction lineup. • The world’s #1 selling compa act excavator for over 15 y years* • Powerful, comfortable new SVL97-2 track loader

• Maneuverable, high-visibilitty, y, high g performance, p new R64 40 wheel loader

3144 Hwy 74 East Monroe, NC 28112 www.brookssales.com

KubotaUSA.com *According to 2019 daata from Off-Highway Research including all Kubota Group brand sales. © Kubota Trractor Corporaation, tion, 2021. This maaterial is for descriptive purposes only. Kubota disclaims all representaations and warranties, express or implied, or any liability from the use of this material. For complete warranty, safety and product information, consult your local Kubota dealerr.. For the complete disclaimerr, go to KubotaUSA.com/disclaimers and see the posted disclaimerr..

Yanmar Welcomes Five New Dealers in Four States Yanmar Compact Equipment announced the introduction of five new dealers to its network — Carrollton, Texas-based ROMCO Equipment Company with eight locations; Corona, Calif.-based Volvo Construction Equipment & Services with six locations; Montgomery, Ala.-based Stone Equipment Company with one location; Bremerton, Wash.-based Sherlock Equipment Sales with one location; and Wenatchee, Wash.-based Rowe’s Tractor with one location. “Dealers are absolutely vital to our success,” said Jeff Pate, Yanmar Compact Equipment North America director of sales. “As the first point of contact with the end user, we need to be able to trust that our dealers have a passion for the Yanmar brand and what it stands for. We are pleased to add new dealer partners who share our values.” The new dealers will offer Yanmar’s powerful, dependable and efficient compact excavators, tracked carriers and wheel loaders. This includes the SV40 compact excavator, designed specifically for the North American market and featuring best-in-class power, digging force and lifting capac- Yanmar has added dealers in Texas, Alabama, California and Washington.

ity. The SV40 is one of Yanmar’s nine excavators purpose-built to overcome the most challenging conditions. The equipment delivers enhanced performance, fuel conservation and flexibility, all backed by Yanmar’s 4year/4,000-hour compact excavator warranty. Yanmar Compact Equipment dealers also feature the company’s tracked carrier lineup. The carriers’ durable rubber tracks provide the high-flotation, low ground pressure capability to productively operate in difficult-toaccess muddy conditions while minimizing ground disturbance areas. Additionally, the new dealers will offer customers the company’s articulated wheel loaders, featuring premium power and versatility in a compact, nimble package, allowing for easy navigation in tighter spaces. Powered by powerful, yet fuel-efficient, Tier IV Final diesel engines, they lift and move heavy loads with ease, according to the manufacturer. For more information, visit Yanmar.com/us/products/construction/. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 2, 2021 • Page 25

TAK AKE PR RODU UCTIV VITY TO A NE EW LEVEL L.

We pa ave the C Carolinas.. CAROLINA C CAT Serving Western e n Nortth Carolina

1.800.277.121 . 12 CarolinaCat.co om

BLANCHARD D MACHINERY

G GREGOR Y POOLE

Serving South C Carolina

S Serving Eastern Nortth Carrolina

1.844.BLANC CHARD

1.800.447.31 . 12

BlanchardMachinery h .com

G GregoryP oole.com

Page 26 • June 2, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

FDOT’S $600M Gateway Expressway Will Improve Flow “It will be primarily built in the median of the Roosevelt Boulevard between the Bayside Bridge and Ulmerton Road,” Carson said. An interchange at Ulmerton Road will be built as part of this project. The new roadway will continue south until it merges with SR 690. “This new roadway is being built along the median of 118th Avenue North,” Carson explained, “and includes flyover bridges connecting to mainline U.S. 19. The new SR 690 will be elevated over portions of 118th Avenue North, 49th Street North, 47th Street North, 43rd Street North, the ramp at 31st Court North and 28th Street North.” In addition to the new SR 690 four-lane tolled expressway from U.S. 19 to west of I-275 and from the Bayside Bridge to I275, project improvements include: • Constructing SR 686A on the north end of the project, a new four-lane elevated tolled (static, meaning the cost will remain the same at all hours) expressway from the Bayside Bridge (CR 611) to just west of I275 within the median of Roosevelt Teamwork Boulevard with a new interchange at Archer Western-de Moya Joint Venture is Ulmerton, at which point it will continue serving as general contractor for the nearly south until it merges with the future SR $600 million ($598 million precisely) proj690; ect. Archer Western Contractors LLC was • Reconstructing existing Roosevelt established in 1983, with corporate headBoulevard from the Bayside Bridge to quarters in Chicago. Considered a national Ulmerton Road; expert in the building, civil, transportation • Reconstructing sections of existing and water sectors, it’s part of the Walsh Group. The company focuses on infrastruc- Archer Western-de Moya Joint Venture is serving as general contractor for the nearly U.S. 19 and 118th Avenue North, including new ramps and flyover structures; and ture improvements such as multi-level high- $600 million Gateway Expressway project in Tampa Bay. • Various improvements to interchanges, way interchanges, bridges, light rail transit, levees, airport civil work, lift stations, pump stations and Shelby Erectors, Blacktip Services Inc., Preferred Materials intersections and ramps within the project limits. In addition, I-275 will be widened to add toll lanes in each water treatment plants. It has completed several complex Inc., P.A.W. Demolition and Traffic Management Solutions. direction along the median next to the existing lanes from highway and bridge construction projects in Miami. Getting to Work south of Gandy Boulevard to 4th Street North. These lanes The de Moya Group Inc. is a highway and bridge conThe design-build project began Aug. 21, 2017, and Carson are being designed in preparation for future express lanes struction company with 25 years of civil construction experience throughout Florida. Founded in 1986 by three broth- said the current expected completion date is early 2023. In proposed for the Howard Frankland Bridge. short, they are constructing the future SR 690, a new fourIn total, the project includes construction of 27 bridges; ers, it specializes in complex major infrastructure projects. The joint venture has worked on several other projects, lane elevated tolled expressway connection from U.S. 19 to mechanically stabilized earth walls; concrete and asphalt paving; electronic toll gantries; lighting; signage; and but a spokesperson said “Winning the Gateway Project is a the west of I-275. A new four-lane tollway expressway from the Bayside Intelligent Transportation Systems installations. great opportunity for Archer Western/de Moya Group to work with the Florida Department of Transportation in Bridge to just west of I-275 also is being built. see GATEWAY page 30 GATEWAY from page 1

to decrease travel times, making it easier and faster to drive from Pinellas County across the bay into Tampa. Transportation problems have been around for decades, but several expressway projects were cancelled as far back as the 1970s and 1980s, so the county has had no major limitedaccess thoroughfares other than I-275. While significant upgrades to U.S. 19 in the 2000s improved north-south traffic flow, east-west traffic has been relegated to local roads. Greg Deese, FDOT engineer, told ABC Action News that the project has gained momentum in the past two years. By late 2022, it should connect U.S. 19 to I-275 and the Bayside Bridge to I-275, giving drivers a tolled option to commute “several miles up and over dozens of traffic signals.” In addition to speeding up traffic flow, one of the Gateway Expressway project’s goals is “to improve the existing roadway system by enhancing safety, adding capacity and improving mobility,” Carson added.

The Gateway Expressway project has been designated a priority project to improve traffic flow in Pinellas County.

District Seven.” Cardno, a global infrastructure, environmental and social development company, is providing design review, procurement and RFP assistance, in addition to construction administration throughout the five-year project and monitoring and inspection of onsite construction operations and materials. Sub-contractors include David Nelson Construction,

Sub-contractors include David Nelson Construction, Shelby Erectors, Blacktip Services Inc., Preferred Materials Inc., P.A.W. Demolition and Traffic Management Solutions.

The Florida Department of Transportation is working on one of the biggest construction projects in Tampa Bay history: The Gateway Expressway.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 2, 2021 • Page 27

3570 Dickerson Pike • Nashville, TN 37207

(615) 865-7800

www.parmantractor.com

Page 28 • June 2, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 2, 2021 • Page 29

EXPERTS SAY YOU CAN ONLY FOCUS ON ONE THING AT A TIME. We chose articulated dump trucks

Contact your local dealer to learn about our great offers. TerexTrucks.com

Page 30 • June 2, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Gateway Expressway On Schedule to Complete Late 2022

Equipment being used as part of this project is owned by the Archer Westernde Moya Joint Venture, purchased from Ring Power. Rental equipment came from Kelly Crane and Hunter Crane Merchant Transport and Rigging. GATEWAY from page 26

The new express lanes along I-275 are in addition to the existing general-purpose, non-tolled lanes and are intended to ease congestion and improve traffic flow. FDOT points out that the existing roadways will remain the same for drivers who do not want to pay tolls. ABC Action News recorded Deese as saying, “The surface streets are only going to be for local traffic.” He considers the project a “huge improvement” for commuters who will no longer have to stop at lights and said it will dramatically improve traffic flow, significantly reducing delays. But even drivers on the local streets should see reduced congestion with many travelers diverted to the toll roads. The project also will make it easier for drivers to get to St. Pete Clearwater International Airport, according to FDOT.

In total, the project includes construction of 27 bridges; mechanically stabilized earth walls; concrete and asphalt paving; electronic toll gantries; lighting; signage; and Intelligent Transportation Systems installations.

Boulevard, and while removing sections of the northbound I-275 ramp to Roosevelt Boulevard while maintaining traffic,” she said. “Another operation was the removal of the 4th Street North overpass bridge over I-275 in less than 16 hours,” she added. To assist with that task, Mammoet, a privately held Dutch company specializing in engineered heavy lifting and transport of oversized and heavy objects, provided heavy transport equipment. To speed construction, TyBot, a completely autonomous rebar tying robot, is being used during rebar installation work on the many bridges being constructed on this project, Carson noted. TyBot doesn’t require pre-mapping, programming or calibration. It self-locates, self-positions and self-ties up to 1,000 intersections an hour. It can be deployed to any

job site that has screed rails in place and will do the work of a 6- to 8-person team. Other equipment being used as part of this project is owned by the Archer Western-de Moya Joint Venture, purchased from Ring Power. Rental equipment came from Kelly Crane and Hunter Crane Merchant Transport and Rigging, Carson said. Materials used thus far on this project include: • Structural steel: 8,130 tons • Reinforced steel: 10,800 tons • Concrete beams: 74,200 linear ft. • Concrete: 192,000 cu. yds. • Asphalt: 115,000 tons Despite the challenges and complexity of the project, Carson said it is currently on schedule to complete late next year.  CEG

Community Reaction Carson said the project team works closely with the FDOT Public Information Office because community outreach and public information are vital to the success of the design-build project. There is a designated website providing updates and alerts to upcoming lane closures and detours. Despite that, local business owners complain about the vibration of demolition, the noise of construction and the resulting decrease in business (up to 40 percent for some companies) as a result of detours, lane closures, congestion and general obstruction. Deese said that 250 construction workers are on the job site 5 to 6 days a week, day and night, to try to complete the job quickly. Challenges There have been a few challenges with relocating overhead utility lines along 118th Avenue, Carson said. The lines must be moved in order to “build new bridges, allowing travel lanes to remain open while constructing the elevated roadways in the medians of 118th Avenue North and Roosevelt

Despite the challenges and complexity of the project, it is currently on schedule to complete late next year.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 2, 2021 • Page 31

Page 32 • June 2, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

SECTION

Attachments Pages 33-37

For more information about these attachments and more, visit our Attachments Section on our Web site at www.constructionequipmentguide.com

Getting Connected to Ride-On Trencher Attachments SPECIAL TO CEG

help operators quickly move from one project to the next.

Ride-on trenchers are one of the most efficient pieces of equipment for underground construction projects. From digging a trench for utility installation to a variety of landscape, hardscape and construction-grade tasks, ride-on machines are the easiest and most affordable solution to help underground construction professionals get the job done. And, with a growing number of available attachments, operators can turn one machine into many and get even more ROI from their trencher. Here are some of the attachments that can increase uptime and

Standard Trencher The standard trencher attachment is a staple for any ride-on trencher machine. It generally comes pre-installed on a ride-on trencher. The standard trencher attachment will dig approximately 4 to 5 ft. into the ground and create a trench 6 to 12 in. wide, although different manufacturers will offer varying size options. With standard trencher attachments, contractors can efficiently create trenches to install irrigation lines, fiber or cable. The most popular trencher attachments will come equipped with a combina-

By Brant Kukuk

With a growing number of available attachments, operators can turn one machine into many and get even more ROI from their trencher.

tion chain that is fitted with both shark tooth and cup tooth chains to cut through a variety of soil conditions. When using a standard trencher attachment, it’s important to always let the trencher work at its own pace. Forcing a trencher to cut faster can lead to broken chains and downtime for repairs. It’s also advised to inspect a chain at the start of every job to ensure that the chain has the proper tension. A good rule of thumb for determining this is to follow the two-finger rule — when inspecting chain tension, two fingers should fit between the chain and the lowest part of the boom when the boom is parallel to the ground.

Contractors also should check to ensure there are no broken teeth on the trencher attachment. Both poor chain tension and broken teeth can reduce the effectiveness of the attachment. Backhoe Unlike most other ride-on trencher attachments, a trencher-backhoe attachment is most often stationed at the front of a machine so that it can operate in conjunction with another attachment. The primary function of a backhoe attachment is to start and finish a trench — similar to an entry-pit and an exit pit in HDD. A backhoe attachment is benefisee TRENCHERS page 36

Page 34 • June 2, 2021 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide

Can Your

Mini-Excavator... Quick Change from Excavator...

Do This? To Rigid Boom, Universal Skid-Steer Tool Carrier!

It Can Now! XBoom Coupler® System

(800) 526-8538 Amulet.com

Available for most late-model brands up to 13K-Lbs

Construction Equipment Guide • Attachments & Parts Section • www.constructionequipmentguide.com • June 2, 2021 • Page 35

THIS MONTH’S SPECIALS 2082500022 - Two turntable bearings for a Komatsu PC400-3. Avon# 2055B3................................................................................$7,175 Each 2072500022 - Two turntable bearings for a Komatsu PC300-3. Avon# 1555B3................................................................................$4,475 Each 2052500021 - Two turntable bearings for a Komatsu PC200-3. Avon# 1148B4................................................................................$3,450 Each 24100N418F1 - One turntable bearing for a Kobelco 909. Avon# 1551B9 ................................................................................................$2,075 21400N3354F2P1 - One turntable bearing for a Kobelco 907C or K907C. Avon# 1447B2 ......................................................................$4,850 KBB0282 / D28001 - One Link-Belt turntable bearing for a LS3400C. Avon# 1249B5 ..............................................................................$3,950 TH103075 - One John Deere turntable bearing for model 792. Avon# 1556B8 ........................................................................................$3,500 TH108810 or AT190766 - One John Deere turntable bearing model 490D and 495D. Avon# 1143B9 ....................................................$1,100

Mobro Marine Sells CRANE PARTS You will find the parts you need at MOBRO Marine, Inc. We purchase in bulk directly from the manufacturers to maintain our large inventory. We also have a large inventory of long-lead time parts for cranes that can’t be found anywhere else. Not only does this mean we have the part you need in stock, it also saves you money. Because we buy in volume, we can buy for less and pass the savings on to you. Our large inventory keeps construction equipment performing at optimum levels. We offer same-day shipping on most parts - you’ll experience minimal downtime. We are a full-service company. We not only supply parts, but we also service and repair construction equipment and cranes of any type.

We sell high quality genuine OEM parts from the following manufacturers: • Terex • American • Bucyrus-Erie • P&H • Kobelco • Koehring • Lorain • Northwest Crane

MOBRO MARINE, INC. Please Contact Billy Harper or Tony Cruz at 904-733-1822 Hablamos Español

www.mobromarine.com/parts/php

Page 36 • June 2, 2021 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide

Ride-On Trencher Attachments Help Increase Uptime, Efficiency TRENCHERS from page 33

cial especially on job sites in which the start and end of a trench are in close proximity to urban hazards like fencing or existing landscape structures. A backhoe attachment also is used in rehabilitation and repair projects because it allows for more precise digging than a standard trencher attachment. The typical backhoe attachment starts with a 6-ft. digging depth and has a bucket width of 12 in. As machine size increases so too does backhoe size. Saw A saw attachment — also known as a rock saw — is a circular blade that is similar in appearance to a microtrencher. This attachment is used to cut through difficult and rocky terrain. The most common saw attachments will dig down to a depth of 16 to 48 in. and typically use a conical bit blade with carbide. As a result, it’s important to consistently check the blade for wear. As saws are constantly used in rocky conditions, their bits will wear down faster than standard trencher teeth. Microtrencher Microtrenching is paving the way as a cost-effective solution that can help operators cut time, minimize disruptions and increase their overall ROI. Most commonly used for fiber installation, microtrenching attachments allow for a narrower trench to be created than with a standard trenching attachment. For instance, a microtrencher will cut a trench ½ to 3 in. wide. This narrower trench saves contractors backfilling time and cost

since less backfill will be needed. Microtrenching is typically done in the gutter pan that parallels the road where the asphalt meets concrete of the curb. By cutting a narrower trench when cross cutting and trenching on the side of the road, contractors don’t need to stop traffic, saving on traffic redirection headaches and associated costs. There are two typical blades that most microtrenching attachments will use. The first is a conical style bit that rotates in a holder and functions like a traditional rock saw. The second is a PDC blade, which is composed of diamond with carbide. The conical bits are generally the more affordable option between the two, but diamond PDC blades are growing in popularity due to its cleaner cut and longer lifespan. While a conical bit will be effective through around 4,000 ft. — meaning that contractors will likely need to replace bits daily — a diamond PDC blade will last around 20,0000 ft. before it needs to be replaced. Vibratory Plow A plow attachment is most commonly used to bury flexible pipe, conduit and cable. The plow is an attractive option in these applications as it offers the ability to install the application as the machine drives. Plows also create less ground disturbance than a standard trencher because they do not create an open trench. However, plows may be difficult to operate in hard or rocky ground conditions. There are two different styles of plow blades: a pull

blade and a feed blade. A pull blade does what its name implies and will pull a cable, conduit or fiber behind the blade to install it underground. A feed blade will have a feeding chute on the attachment to allow conduit to be fed down through the attachment and into the ground. Safety Best Practices As with any machine or attachment, it’s always important to read the operator’s manual before boots hit the ground. Remember that anytime crews are digging into the ground, they should always call 811 to get a job site located. Understanding where existing utilities are located is one of the most important steps in mitigating damage and reducing the chance of costly strikes. Additionally, it’s important to take precautions when installing attachments. While attachments are built to have the ability to be changed out, we always recommended that users contact a local equipment dealer when looking to remove or install attachments. Personnel at a dealership have been trained and have access to the proper equipment to ensure a safe attachment exchange. Trenching for Efficiency Ride-on trenchers are consistently one of the most popular machines in underground construction. Now, with the growing number of attachments available, operators can customize their machine to meet almost any job site need, maximizing uptime, improving job performance and increasing ROI. 

Construction Equipment Guide • Attachments & Parts Section • www.constructionequipmentguide.com • June 2, 2021 • Page 37

PUT MORE ON THE GROUND WITH

LaBounty | 1538 Hwy 2 | Two Harbors, MN 55616 | 1-833-723-1843 | www.stanleyinfrastructure.com/brands/labounty

STONE EQUIPMENTCO., INC. www.stoneequipmentco.com

COMPANY WRENCH www.companywrench.com Lakeland, FL 863-937-6829 866-262-4181 Charlotte, NC 908-859-4680

Smithfield (Raleigh) NC 919-938-8145 855-562-3526

Lexington (Columbia) SC 803-520-0032 855-562-3526 Knoxville, TN 865-766-2571

Montgomery, AL 334-430-8431

Alabaster (Birmingham), AL 844-786-6373

Villa Rica, GA 678-367-6504

Page 38 • June 2, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 2, 2021 • Page 39

Larger control valve and electronic controls deliver smooth, precise performance and up to 12% faster cycle times

Shift-long comfort from a spacious cab, automotive-grade seat and ergonomically-designed, fullyadjustable arm rests

Award-winning Wide Angle Visual Enhancement System (WAVES) provides seamless 270° panoramic view

Ground-level access to routine service points cuts daily maintenance down to just minutes

LINK-BELT MID ATLANTIC www.link-beltmidatlantic.com Ashland, VA 866-955-6071 Chesapeake, VA 800-342-3248 Frederick, MD 833-546-5235

Robust undercarriage with innovative side-frame design is easier to clean

2115 N. Thompson Lane Murfreesboro, TN 37129 877-200-5654 5200 Hollywood Ave. Shreveport, LA 71109 800-548-3458

CROSBY EQUIPMENT COMPANY, INC. www.crosbyequipmentco.com 1826 South Peterson Avenue Douglas, GA 31535 912-384-4664 5368 Hawkinsville Rd. Macon, GA 31216 478-257-8300

364 Bob Jobe Rd. Gray, TN 37615 855-201-7453 10110 Roberts Way Covington, GA 30014 770-788-0888 7651 Theodore Dawes Rd. Theodore, AL 36582 251-653-5955 825 31st Street North Birmingham, AL 35203 205-323-6108

MID SOUTH MACHINERY, INC. www.gomidsouth.com 3233 Highway 80 West Jackson, MS 39204 601-948-6740 3145 Cliff Gookin Blvd. Tupelo, MS 38801 662-690-6553 14336 Seaway Road Gulfport, MS 39503 228-867-1555

Tier 4 Final engines deliver up to 12% improved fuel economy…and no DPF to maintain

HEAVY MACHINES, INC. www.heavymachinesinc.com 3930 East Raines Road Memphis, TN 38118 800-432-8902

EQUIPMENTSHARE www.equipmentshare.com 10179 US-78 Ladson, SC 29456 843-709-2458 145 Thunderbird Dr. Richmond Hill, GA 31324 912-400-0752 2919 E. Napolean St. Sulphur, LA 70663 337-284-9804

www.gsequipment.net Tampa, FL 866-586-8956 Pompano Beach, FL 954-327-8808 Ft. Myers, FL 239-334-6063 Tallahassee, FL 850-574-0892 Orlando, FL 407-859-9160 Jacksonville, FL 904-268-4400

Page 40 • June 2, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Pages 41-49

Aggregate Production and Recycling Section For more information on crushing, screening and recycling equipment, visit CEG's Web site at www.constructionequipmentguide.com.

Rockster Impactor Aids Sustainability of Hawaiian Paradise After a long cruise over the Atlantic Ocean through the Panama Canal, and across the Pacific, Rockster’s mobile impact crusher R700S reached Hawaii — more precisely the island of Oahu. Arist de Wolff and his team of 25 motivated employees were very excited about the arrival of their brand new Austrian crushing plant. Alakona Corp., founded in 1982 by de Wolff’s father Mervyn de Wolff, is an asphalt paving and paving maintenance contracting firm, situated in the Hawaiian capital, Honolulu. Alakona Corp serves Oahu and the neighbor islands, with a wide list of clients that includes federal, state, city and county governments, commercial enterprises, developers, property managers, condominium associations and individual owners. At the very beginning, Alakona Corp focused on pavement maintenance with emphasis on slurry seal, seal coating and minor asphalt repairs. During the recent years the company has moved toward its present service/product mix, deriving its income from asphalt repair, asphalt overlay, new asphalt lay, pavement maintenance, as well as slurry seal, seal coat and crack fill. Alakona’s Perfect Crusher Is Designed, Produced in Austria Alakona owns several machines it needs for its core business, like pavers, rollers, loaders, excavators, slurry and seal coat applicators. When it searched for a crusher to expand its business, it put its focus on compact machinery below 25 tons, which exactly fits its fleet. “We feel that Austrian engineers are really honest. Wolfgang Kormann explained in detail how the machine could be beneficial to us and it is true. We are so flexible in terms of processing different

aggregates and the material we produce with our crusher is of high value. We do also like the fact that the return belt can be turned aside, and we can make another fraction, as well as the fine side belt that can be pulled off. “The screen box is also very beneficial as it allows us to produce different material sizes by just switching some screens. There are some options that others don’t have, and we are very enthusiastic about the hydrostatic drive”, said Arist de Wolff. Due to this drive system, the performance of the R700S is constantly high, as the hydrostatic pressure always adjusts to the power requirements of the crusher, de Wolff added. This leads to a lower diesel consumption per ton of production because the diesel engine always stays within the optimum speed range. New Line of Business: Processing of RAP It was a logical step for Alakona to put emphasis on a recycling business. “Obviously, natural rock isn’t gonna be there forever, in future we would have to ship it in from

the mainland. Sustainability is the key factor. We need a lot of material for subbases, base coarse or backfills. Using reclaimed asphalt pavement instead of natural aggregate saves resources and money. Moreover, RAP contains a bit of bitumen, it is like a glue, holding everything together and giving more compaction”, said de Wolff. Using the attached screening system, Alakona crushes asphalt from 1 ½ to 2 in. to 1 ½ in. minus of a final size material. “We’re doing a bunch of tests like the CBR, to make sure the final material is suitable for reuse in our construction projects,” he added. The Californian Bearing Ratio (CBR) test is a penetration test used to evaluate the subgrade strength of roads and pavements. Ever Heard of Coral Crushing? Another material that Alakona processes with the new Rockster crusher is coral. In Hawaii you find a lot of coral shells underneath the soil. So, when Alakona works on street construction sites close to the ocean they usually excavate coral.

A very successful family business: FLTR – Operator Jon Keck, Owners Mervyn de Wolff, Betsy Wilson, Max de Wolff and Arist de Wolff with his wife and their two girls.

Without a screening system, they run a 3 in. minus final product, used mostly for landscaping. “We like the possibility to use the stockpile belt to get another fraction. Especially for processing coral, we run a 2 to 3 in. coarse aggregate from the side belt and 1 ½ in. minus from the screen. Coral is quite a hard rock with high density. The crushed material contains less fines than the crushed asphalt. We can use it as base coarse for house or concrete paths”, de Wolff said.

Alakona Corp from Honolulu relies on a high-quality Austrian crusher brand to process RAP and coral with its new R700S Rockster portable crushing plant.

Easy Transport Facilitates Entry in Contracting Business With a screen box and return belt, the Rockster R700S weighs only 50,300 lbs. (22.8 tons) and can be easily transported with Alakona’s own flatbed truck without the need of transport permits. This gives great flexibility in terms of future plans, to get a foot in the door of contracting business. It also saves a lot of time and money. “We are able to crush so many kinds of material. Within four days of training this summer, we crushed RAP, coral, concrete and basalt. There are so many possibilities for a lot of different customers like construction companies, privates and of course municipalities. You would think that people on an island would be more aggressive into researching, testing and using recycled material, but they are hesitant in trying new things. It needs to be pushed more and people need to understand that this is the future. There needs to be recycled material especially in construction fields where we could save so much natural resources,” de Wolff said. For more information, visit www.rockster.at. 

Page 42 • June 2, 2021 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Yo Y our Florida dealer for Metso Outotec crushing g and screening g equipment As your Metso Outotec dealer in Florida, Kelly Tractor provides premium quality equipment to ensure high quality end products. We carr y the complete line of Metso Outotec crushing and screening solutions, ranging from mobile conveyors, crushers and crushing plants to feeders, screens, OEM parts and more. Ť construction solution for you.

metso.com/aggr /aggreg egates

Miami, FLL | kellytractorr..com (305) 59 922-5360

FAE PT LINE: GET USED TO BEST IN CLASS

(770) 407-2014 - info@faeusa.com

fae-group.com

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • June 2, 2021 • Page 43

A WIRTGEN GROUP COMPANY

T WO O POWERFUL PR RODUCTS. ONE GREAT RESULT. KLEEMANN CRUSHING AND SCREENING G PL ANTS

PERFORMANCE AND EFFICIENCY Y.. KLEEMANN crushing and screening plants can be optimally combined to create a quality end-produc t. An extensive selec tion of mobile jaw, impac t and cone crushers and screening plants, available as scalping and classif ying screens, open up the most diverse applications. With KLEEMANN plants, you’ll achieve the best results – in natural stone, recycling and mining. www.wirtgen e -group.com

WIRTGEN AMERIC A , INC . · 6030 Dana Way · Antioch, TN 37013 · Tel: (615) 501- 0600 · Fax: (615) 501- 0691

Florida, North & South Carolina 1-888-LINDER8 www.linder.com www.facebook.com/ linderindustrialmachinery

TRACTOR & EQUIPMENT COMPANY

Alabama, Florida (Panhandle) & Georgia 205-591-2131 www.tec1943.com

Kentucky, Indiana & Tennessee 877-538-3221 www.bramcomps.com

Page 44 • June 2, 2021 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Powerscreen Responds to Decarbonization Challenge

Powerscreen, a leading provider of mobile crushing and screening equipment, is responding to the industry’s decarbonization challenge by providing solutions that work toward minimized environmental impact and greater sustainability. Powerscreen’s decarbonization story begins with the introduction of the concept of mobile crushing and screening, has evolved to increase fuel efficiency and looks to the future with Powerscreen’s electrification strategy, including an exciting, brandnew concept for the future of crushing and screening — the Eco-Warrior battery powered screener. Neil Robinson, Powerscreen product and applications manager said, “Some may view this topic as a recent trend, but for Powerscreen, decarbonization is multifaceted and has always been at our core. The Powerscreen mobile concept has always contributed towards decreasing the carbon footprint per ton of material produced. “This is done by reducing unnecessary material handling of hauling and loading material to static plants in aggregate production or in the ability to recycle and reuse material at point of use, for example in roadbuilding projects where sub-base material is produced in situ. Using stockpiling conveyors as part of a track mobile set-up is another perfect example of how-to cut-out unnecessary double handling, reducing fuel consumption and therefore carbon production.” Powerscreen has evolved its product range to reduce environmental impact by

making its crushing and screening equipment as fuel efficient as possible, using direct drive systems for its crushing range and improving engine capabilities and driveline design for its screening range. “Direct drive systems are proven to be 13 to 18 percent more fuel efficient when compared with hydrostatic, resulting in significantly less carbon emissions, while improvements to our screening range has reduced engine speeds from 2,200 rpm to 1,800 rpm, which not only means cleaner engines with less emissions, but also reduced fuel usage and therefore carbon produced,” said Robinson. “For example, a typical mid-size screener running at 1,000 hours per year, has a fuel usage reduction of approximately 450 liters, which equates to 1.2 tonnes less of carbon produced annually.” Another important tool for fuel efficiency is Powerscreen Pulse, in-depth machine telematics that helps customers see how and where their machines are being operated, understand fuel consumption and carry out fault-finding activities to ensure optimized performance. “Powerscreen was the first mobile crushing and screening manufacturer to offer indepth machine telematics with the launch of Powerscreen Pulse in 2013. In the early days, it generated a large volume of data, but now our system has been refined to deliver actionable information with customized reports and suggested actions for more fuelefficient operation,” Robinson said.

Electrification is currently a key focus of the Powerscreen decarbonization strategy. The Powerscreen Hybrid range, designed to give customers alternative energy options to operate their range of crushing, screening and conveying equipment, has been dramatically enhanced to include more fully electric crushers and screeners as well as models powered by innovative combinations of diesel and electricity. These options enable customers to choose which fuel to use, depending on cost, location and availability, and are of particular benefit to customers who operate in an area where electricity is more cost effective than diesel fuel, where diesel engine noise is unwanted or on sites where electricity is the preferred energy source. “Customers using Powerscreen Hybrid units powered off the grid have been able to reduce onsite carbon emissions by 57 percent per ton of material produced. While our hybrid customers have traditionally been in environmentally conscious countries and states, where legislation or financial incentives are more focused on green energy, we are witnessing a significant uptake in nontraditional locations, as customers prepare to comply with increased government drives for carbon neutrality.” Powerscreen continues to spearhead the industry’s drive for decarbonization and a clear demonstration of this is a brand-new concept for the future of crushing and screening — the Eco-Warrior battery powered screener. Working closely with automo-

tive technology and using top of the range, hyper efficient drives and intelligent control systems, the Eco-Warrior battery powered screener has been designed to deliver on the powerful screening action that Powerscreen machines are famous for, while being a selfcharging, or plug-in, model that features a simple, quiet engine with no after-treatment requirements, according to the manufacturer. The required engine size has been cut in half compared with the diesel hydraulic unit and the battery pack can mean emission-free running or give a power boost. “To the best of our knowledge this is the first battery powered screener in the world and has been clocking up testing hours since it was built in 2019. It still delivers on the powerful screening action that Powerscreen machines are famous for and we are now exploring taking it from concept to mainstream. “This isn’t a publicity stunt; the drive for decarbonization is real, with the UK, and other governments ruling that carbon emissions have to be reduced by 80 percent by 2050. It’s critical that we dramatically reduce our carbon footprint and Powerscreen has many solutions available today in support of this. However, we’re not stopping there — we’re taking it to the next level, continuing to be the pioneers in adopting technology that supports the industry in meeting the requirements of government decarbonization laws — this is the future.” For more information, visit www. powerscreen.com. 

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • June 2, 2021 • Page 45

THE RIGHT MOBILE EQUIPMENT FOR YOUR OPERATION.

Designed with Maintenance in Mind Your ability to efficiently process materials on site depends on reliable equipment. KPI-JCI and Astec Mobile Screens design and manufacture a wide selection of mobile crushers, screens and conveyors designed with simplicity for easy operation and maintenance to keep you up and running. For unmatched customer support, our dedicated experts and distribution network will help you find a solution that fits your needs. Learn more at kpijci.com/track-mount

Alta Equipment Company

Highway Equipment Company

www.altaequipment.com 539 SW Arrowhead Terrace Lake City, FL 32024 386-758-7444

8418 Palm River Road Tampa, FL 33619 813-630-0077

5151 Martin Luther King Blvd. Fort Myers, FL 33905 239-481-8554

8750 Philips Hwy Jacksonville, FL 32256 904-737-6000

9601 Boggy Creek Road Orlando, FL 32824 407-850-9614

5210 Reese Road Davie, FL 33314 954-581-4744

www.highway-equipment.com 305 Executive Park Drive Concord, NC 28025 980-781-4510

Stone Equipment Company, Inc. www.stoneequipmentco.com 210 West Blvd. Montgomery, AL 36108 844-786-6373

155 Liberty Rd. Villa Rica, GA 30180 844-786-6373

1797-A Fulton Spring, Rd. Alabaster, AL 35007 844-786-6373

For Screens, Crushers, Shredders & Conveyors

Page 46 • June 2, 2021 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Roto-Screen 454 Portable Trommel Screen

Barford TR8048M Track Stacker w/ Mulch Auger

Barford R6536TS Track Radial Stacker

LARGE EQUIPMENT DEALERS (The Beast, Whole Tree Chippers, Sawmill / Chipmill Chippers, Track Carriers)

Keestrack K6 Track Scalping Screener

www.bobcatofstl.com

Bobcat of Clarksville 960 Alfred Thun Road • Clarksville, TN 37040 931-436-9555 Revolver RT508 Compact Portable Trommel

Turn Your Waste Into Profit Sand Science Can Show You How Cell: (843) 410-8334 sales@sandscience.com Barford S104 Track Incline Screener

149 Industrial Blvd • La Vergne, TN 37086 615-941-4000

LARGE & SMALL EQUIPMENT DEALERS

www.SandScience.com Barford SR124 Portable Track Scalping Screener

Bobcat of Nashville

Kafka Stacking Conveyor – 100’ x 36”

(The Beast, Whole Tree Chippers, Sawmill / Chipmill Chippers, Track Carriers, Brush Chippers, Stump Grinders, Skid Steer Attachments) Kafka Hopper/Feeder – Various Sizes Available

Quality Equipment & Parts www.Qepusa.com

4894 NW US Hwy 41 • Lake City, FL 32055 386-754-6186

Alta Industrial Group Announces Full Integration Into Alta Material Handling As of June 1, 2021, The Alta Industrial Group is officially migrating its various businesses in the Materials Handling industry into Alta Material Handling — one brand with the focus of “delivering tomorrow’s promise, today.” Alta is looking forward to working with all its current customers and moving forward with new ones with the hope of fostering customers for life. Alta has been operating as one corporation for a while and will now have all its brands together while still holding itself to the highest standards of customer service and expanding offerings throughout the country. With more than 86 years of combined industry experience and providing customer service that fosters customers relationships,

Alta has consistently been recognized by the Hyster-Yale Group and other equipment manufacturers as one of their top-performing dealers in the country. Alta intends to bring the same level of service to its business. Headquartered in Livonia, Mich., with 55 various locations across 11

states in the Midwest, Northeast and Florida, the company looks forward to this transition. Its construction division will remain Alta Equipment but will still operate as part of the Alta family. For more information, visit altaequipment.com. 

TraxPlus

www.traxplus.com

9800 Hwy 503 • Hickory, MS 39332 601-635-5543

2891 S. Frontage Road • Columbus, MS 39701 662-368-3300 5122 Highway 98 • Summit, MS 39666 601-600-7202

www.companywrench.com

Company Wrench 3729 N. Frontage Road • Lakeland, FL 33810 866-294-6103

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • June 2, 2021 • Page 47

EMPLOYEEE-OWNED EMPLOYEE-OWNED TTREES, BRANCHES, LIMB BS, AND STUMPS A NO MA ARE ATCH TCH FOR A BAN NDIT® F From roadways to right-of-ways, ways, lot clearing too road clearing, get your work ork done faster and m efficiently than ever before more efore with Bandit® m machinery! Choose from different ferent styles and sizes to suit your needs. Call today to reserve yours or to request a demonstra nstration nstration.

IN NTIMIDATO OR 15XP 1 Capacity 15” p ity tyy Hand-Feed Chiipper pp

SMALL EQUIPMENT DEALERS THE BEAST 2460XP Trrack Horizontal Grinder

(Brush Chippers, Stump Grinders, Skid Steer Attachments)

Mason Tractor Company www.masontractor.com 5038 Buford Hwy. Norcross, GA 30071 770-582-0377 Blue Ridge, GA 706-632-3777 Cumming, GA 770-887-6119 McDonough, GA 770-957-3370

MODEL B M BT BTC-300 Trrack Carri rie ier

M MODEL 3590XL W Whole Trree Chipper pp www.bobcatops.com

Bobcat of Charleston North Charleston 843-725-6330

IMPAK AKTO OR 250 Slow Spe Sp peed Shredder p

Bobcat of Columbia Columbia 803-933-9996

Bobcat of Greenville Piedmont 864-269-3600

Bobcat of Spartanburg Spartanburg 864-342-9003 677500 Millbrook Rd. • Remus, MI M 49340 • 1-800-952-0178 FIN FIND ND US ONLINE WWW.BANDITCHIPPERS.COM BANDITCHIPPERS COM

MODEL SG-75 Trrackk Stump S p Grinder Gi d

Bobcat of Savannah Bloomingdale 912-236-5588

Page 48 • June 2, 2021 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

PRO OVEN UPTIME WITH UPTIME K KITS SENNEBOGEN, in keeping with their philosophy to maaximize uptime, uptime has created UPTIME Kits. W Whether you are a service technician in-house or on the road, these kits have everything you y need for every service, maintenance and PM task in one place. They were created to save you time and money. Managing hundreeds of related service parts, from belts and nuts to O-Rings and special tools becomes eassy with a single part number to order and stockk.

PURP POSE-BUIILT

FROM THE T GROUND D UP

They are: • Easy to order an nd easy to stock Ţ 1BDLFE XJUI KPC C TQFDJŻD components an nd tools • Ideal for stockin ng service shops and trucks Choose from the following f kits: • Central lubricattion system kits • Preventive main ntenance service kits • O-Ring kits • Electrical servicce kits • Hydraulic servicce kits And the best thing is that these kits, in stock and ready to go, are custom-built to match your machine mo odel and series. Count on 4&//&#0(&/ UP NFFU ZPVS OFFET JO UIF ŻFME or in-house. For m more information on UPTIME Kits scan the QR code. Kits, code

TRACTOR & EQUIPMENT COMPANY Alabaster, AL 205-621-2489 Anniston, AL 256-831-2440 Birmingham, AL 205-591-2131 Decatur, AL 256-355-0305 Dothan, AL 334-678-1832 Huntsville, AL 256-851-2222 Mobile, AL 251-457-8991

Montgomery, AL 334-288-6580 Tuscaloosa, AL 205-752-0621 Panama City, FL 850-763-4654 Pensacola, FL 850-505-0550 Albany, GA 229-435-0982 Atlanta, GA 404-366-0693 Augusta, GA 706-798-7777 www.tec1943.com

Calhoun, GA 706-879-6200 Columbus, GA 706-562-1801 Hoschton, GA 706-654-9850 Kennesaw, GA 678-354-5533 Macon, GA 478-745-6891 Savannah, GA 912-330-7500

See how SENNEBOGEN ENNEBOGEN can purpose-build the right maachine for you

www.seennebogen-na.com | +1-704--347-4910

POWER EQUIPMENT COMPANY Knoxville, TN 865/577-5563 LaVergne, TN 615/213-0900 Chattanooga, TN 423/894-1870 Kingsport, TN 423-349-6111 Memphis, TN 901-346-9800 Saltillo, MS 662-869-0283 www.powerequipco.com

GSE GREAT SOUTHERN EQUIPMENT COMPANY Tampa, FL 866-586-8956 Pompano Beach, FL 954-327-8808 Fort Myers, FL 239-334-6063 Tallahassee, FL 850-574-0892 Jacksonville, FL 904-268-4400 Orlando, FL 407-859-9160 www.gsequipment.net

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • June 2, 2021 • Page 49

Mark Keenan 336-858-0186

North Carolina a • South Carolina Virginia • West Virginia

Special Inventory Sale

1-800-797-7276 • www.POWERSCREENMIDATL.com • Kernersville, N.C. • Leland N.C.

NEW, UNUSED, CEDARAPIDS PORTABLE PLANTS CRJ3750

BOTH UNUSED!

Including Run on Jacks, Extended Conveyor, Hydraulic Fold down Electrical Panel, Hydraulic legs under feeder/Hopper assembly

MUST SELL!!!

CRC380XHLS

Including Run on Jacks

HEAVILY DISCOUNTED CALL FOR BEST PRICE READY TO SHIP!

Call Mark Keenan 336-858-0186

Trucks & Trailers

SECTION

Pages 50-52

To view our current comparison trailer specification charts visit www.constructionequipmentguide.com

Transportation Biz Brings 30-Year Expertise to Niche Service By Ruksana Hussain CEG CORRESPONDENT

When Brad Grafe, owner and president of Valley Transportation Service Inc., established the company in 1989, he observed a vital niche: providing transportation services to manufacturers and shippers countrywide. From his Grand Meadow, Minn.-based offices, his network of company-owned, leasepurchase and owner-operator trucks provides a much-needed solution to clients across the United States, moving primarily construction and agricultural equipment. From only two trucks, two drivers and two office staff, Valley has grown tremendously in the past three decades, with 60 staff at the main office location, 200 drivers and four outside sales crew and more than 200 trucks. Previously a fertilizer and chemical sales representative for an agricultural equipment cooperative, Grafe managed a trucking company for four years where he learned the business before venturing out on his own in 1989. The scope of services has remained the same at Valley. “The size of the equipment that we haul and the amount of stuff we can put on a trailer has drastically been reduced just because of the size of the equipment,” said Grafe. “We do a

From only two trucks, two drivers and two office staff, Valley has grown tremendously in the past three decades, with 60 staff at the main office location, 200 drivers, four outside sales crew and more than 200 trucks.

see VALLEY page 51

Valley Transportation Service Inc. provides a much-needed solution to clients across the United States, moving primarily construction and agricultural equipment.

Valley works with a team of owner operators and company drivers to support its expanding reach.

Construction Equipment Guide • Truck & Trailer Section • www.constructionequipmentguide.com • June 2, 2021 • Page 51

,?7,90,5*, @6< *(5 ;9<:; 8<(30;@ ;/(; 0: 796=,5 @V\ RUV^ ^OH[ `V\ ULLK [V OH\S -LSSPUN OHZ [OL [YHPSLY [V NL[ P[ [OLYL >P[O V]LY `LHYZ JVTIPULK PUK\Z[Y` ZHSLZ L_WLYPLUJL ^L OH]L [OL HUZ^LYZ [V `V\Y ZWLJPHSPaLK [YHPSLY ULLKZ

-; 37 +YPSS :LYPLZ

VKRZQ ZLWK RSWLRQDO RQH SLHFH EROW RQ WULSOH UHHO UDFN DVVHPEO\

9LVLW ZZZ IHOOLQJ FRP &(* &DOO _ (PDLO WUDLOHUV#IHOOLQJ FRP

Richmond Machinery 1701 Roseneath Road Richmond, VA 23230 804-359-4048 www.richmondmachinery.com

Valley Transportation Continues Its Significant Growth VALLEY from page 50

great deal of back-haul stuff, such as large air conditioner and refrigeration units, used farm and agricultural equipment, auction items … anything that will go on a lowboy or specialized trailer, we’ll sure try to tackle it and move it for you.” A big change he has witnessed in the industry in that time is equipment store mergers. “We went from equipment dealers that were hauling to one location that now have 40 locations, so a lot of our growth was in just keeping up with the customers and the demand they had from buying stores. We kept gaining more and more accounts that helped spur our growth.” Valley typically works with Peterbilt and Kenworth trucks, XL Specialized, Manac and Trail King Industries trailers, hauling equipment across most of the Midwest, Arizona, California, Texas and Florida. Located in a smaller building in downtown Grand Meadow until 2006, Grafe moved Valley to its current location on a 16acre space, with an additional 40 acres attached, offering plenty of expansion room for future growth. Where the company started out at 6,000 sq. ft., Grafe added another 6,000 onto it in 2013 and supplemented that

with a new shop this past winter, which is a full-service center, “where we do everything from engine overhauls to brake jobs and oil changes on all of our equipment,” said Grafe. Among specialized services offered at Valley are large equipment — up to 20 ft. wide, 16 ft. tall and 200,000 lbs. — placing the business outside the realm of a regular trucking company. This includes crane load, drive-on and drive-off loading, etc. While Valley has fared well on the equipment front, “We are running into some problems right now with COVID-19 and the issues of being able to get trucks finished and delivered to us,” said Grafe. “We buy new trucks every year on a trade cycle and some of them are getting a little tougher to get. One of the bigger challenges is all the emissions on the engines over the years. It started in 2008 and 2009 when the emissions portion first came out. We had a lot of trouble with engines, so just getting the problems worked out and keeping the motors running over the years has been challenging.” Alongside, working with drivers means safety is a top priority at Valley and the safety director ensures everyone is well-trained on that front. A string of safety awards

earned by the company in recent years proves the value placed on safety for staff working at Valley. Online training is provided to all drivers, with instructional videos and hands-on driver testing. A weekly drivers’ meeting is held where all the drivers present that day meet with the safety team to review different topics and address the everchanging regulations in the industry. Valley works with a team of owner operators and company drivers to support its expanding reach. Approximately 130 trucks are company-owned and operated by company drivers. Another 45 are leased, where Valley offers a lease-purchase program for the drivers so they can buy the trucks from the company. “The workforce is the biggest challenge that we face every day, not so much with the office and shop staff, but the driver situation that has always been a problem,” said Grafe. “But today it seems worse than the prior years. Our drivers are out typically three weeks at a time, so it gets difficult to find that type of person that wants to be away for long.” To address the workforce challenge, aside from competitive pay and bonus, Valley rewards “Driver of the Month” and “Driver of the Year” recognition and the business has

created a new drivers’ lounge in the new shop providing breakfast and lunch. It also has a bunk house outside of town built for drivers so they get their own hotel room they can stay in when their trucks are in the shop. Valley also has stayed ahead of the curve with computer and technology upgrades, including using PeopleNet fleet management software in its semi-tractors to track where vehicles are any time of day. Grafe said he is considering forward-facing and side-view facing cameras to capture accidents as well, as he anticipates steady growth in the future. “We try to add 10 to 15 trucks a year right now, so we try to get that growth scheduled and along with that comes the challenges of the driver issue, so we are trying to battle that and keep our growth up, too.” Business is finally picking up this year after a terrible second quarter last year, said Grafe. “Our mission statement is ‘Our Goal is to Help You Reach Yours,’ so we are here to make sure that the customer is taken care of and they get their customer taken care of … we push that pretty hard with our staff and we try to make it smooth and easy for the customer because we know they’ve got one on the other end that they are trying to satisfy.”  CEG

Page 52 • June 2, 2021 • www.constructionequipmentguide.com • Truck & Trailer Section • Construction Equipment Guide

NOT A ALL TRAILERS ARE BUIL B T THE E SAME SOME ARE E STRONGER TH HAN OTHERS

COMPANY WRENCH www.companywrench.com

2XU WUDLOHUV VWDUW RXW WRXJK DQG VWD\ WRXJK VR WKH\ FDQ VDIHO\ KDXO \RXU HTXLSPHQW GD\ DIIWWHU GD\\ \HDU DIIWWHU \HDUU

3729 N. Frontage Road Lakeland, FL 33810 866-294-6103 11301 Reames Road Charlotte, NC 28269 980-859-4680 125 Wilsons Mills Rd. Extension Smithfield (Raleigh), NC 27577 919-938-8145

Learn more: towmaster towmaster.com/more .com/more

141 Brickyard Rd. Lexington (Columbia), SC 29072 803-520-0032 6325 Central Avenue Pike Knoxville, TN 37912 865-766-2571

'URS 'HFN

RING POWER CORP. www.ringpower.com

7LOW 'HFN

+\GUDXOLF 7DLO

AMERICA A’S A ’S BEST BUIL LT T TR TRAILERS RAILERS FOR PRO OFESSIONAL HA AULERS

/RZER\

MOR RE MODELS • MORE OPTIONS ONS • MORE CHOICES

Call 800-462-4517 WR ʳQG \RXU QHDUHVW GHDOHU RU YLVLW RQH RI WKHVH

500 World Commerce Parkway St. Augustine, FL 32092 904-494-7631

Lake City 386-755-3997

Sarasota 941-359-6050

Lakeland 863-606-0512

Tallahassee 850-514-1958

Brooksville 352-797-9500

Ocala 352-620-0660

Tampa 813-671-3200

Daytona Beach 386-947-4939

Orlando 407-856-4851

Jacksonville 904-714-3517

Palm Bay 321-725-6420

YANCEY BROS. CO. www.yanceybros.com 330 Lee Industrial Blvd. Austell, GA 30168 800-282-1562

Albany 800-768-2892

Calhoun 800-752-9804

Dacula 800-545-2945

Macon 800-633-5180

Savannah 800-755-8382

Valdosta 800-755-6841

Augusta 800-446-5131

Columbus 800-633-5240

Kennesaw 844-962-7368

McDonough 855-901-0100

Statesboro 888-764-6506

Washington 888-678-3211

Waycross 888-948-2443

Felling Trailers Releases Newest Utility Pole Cargo Trailer Operator safety, ease of use and maintenance are prime factors taken into account when any company is looking into equipment acquisition. These same factors are even more vital in the Utility & Telcom Industry as they service, build and maintain infrastructures for their state and local regions. Felling Trailers’ re-engineered utility pole cargo trailers (UPT-C’s) are fully engineered and documented products that embody these factors. Thus operators can be assured of many years of reliable, trouble-free service, according to the manufacturer. Felling’s engineering, sales and utility telecom product manager worked together to create a userfocused product, incorporating all of the standard features an operator wants and needs to get through a day’s schedule of pole replacements and line maintenance. The UPT-C model line offers four models with GVWRs (gross vehicle weight rating) ranging from 13,800 to 23,000 lbs. All models are standard with electric

FSA (forward self-adjusting) brakes on all axles with an air brake option available on FT-20 UPT-C. Cargo Box Lengths Available • 20 to 30 ft. length 10 ft. bed (standard on all models) • 24 to 40 ft. length 12 ft. bed (available on all models) • 29 to 46 ft. length 14 ft. bed (available on FT-20 UPT-C only) Functionality, Flexibility Equipped with a 2 in. cold rolled steel, positive locking adjustment pin and designed with a notched flange welded on the pin, the flange notches have to pass through two tabs welded 90 degrees from each other, assuring a positive locked position. The 2 in. positive locking adjustment pin is attached to the trailer with a chain to prevent loss. Improved toolbox design offers safer accessibility for the operator when the trailer is loaded with poles and features a locking t-handle design. The tailgate latching system features a spring-loaded

FT-14 UPT-C in 20 ft./30 ft. length.

securement system, and bumper stops on the tailboard to govern the rear tailgate. Safety By Design The UPT-C trailers feature a triple taillight system which provides for increased visibility of the truck and trailer during offload/loading of poles in the field. Optional amber LED strobe lights, switched and mounted in

tailboard, replace two center lights. Pole transport, UPT-Cs are equipped standard with center and rear, 95 in. wide bolsters with 21 in. sliding lever locking removable stanchions with winch binder and 30 ft. by 4 in. strap. A 45 in. wide front bolster with a 4 in. strap and binder are standard. Optional front bolsters include 60 in. and 95 in. wide. Both are

double c-channel construction and have a 4 in. strap and binder along with lever locking removable stanchions. Multiple load securement points are located down the mainframe rail. Four d-rings provide ideal tiedown points for the material being carried in the cargo box. • 10 in. c-channel main frame rails • Extendable tongue, 8 in. by 4 in. by ¼ in. wall tube with 10 in. by 6 in. by ¼ in. receiver tube • Cargo box, 15 in. tall sides, 10 gauge floor and 12 gauge sides • All wiring and airlines (when equipped with air brakes) are ran internally traveling in a heavy-duty energy chain • No user intervention is required for the wiring or airlines when extending and retracting the tongue • Positive locking adjustment pin with a chain attached to the trailer to prevent loss For more information, call 800/245-2809 or visit www.felling.com. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 2, 2021 • Page 53

LINDER INDUSTRIAL MACHINERY www.linder.com Florida Ft. Myers • 239/337-1313 Jacksonville • 904/786-6710 Ocala • 352/629-7585 Orlando • 407/849-6560 Pembroke Pines • 954/433-2800 Plant City • 813/754-2727 West Palm Beach • 561/863-0570 North Carolina Asheville • 828/681-5172 Charlotte • 980-777-8345 Greenville • 252/695-6200 High Point • 336/665-0110 Raleigh • 919/851-2030 Wilmington • 910/254-2031 South Carolina Columbia • 803/794-6150 Greer • 864/877-8962 North Charleston • 843/486-8080

POWER EQUIPMENT www.powerequipco.com Chattanooga, TN • 423/894-1870 Kingsport, TN • 423/349-6111 Knoxville, TN • 865/577-5563 LaVergne, TN • 615/213-0900 Memphis, TN • 901/346-9800 Saltillo, MS • 662/869-0283

“THEY JUS ST WORK BETTER! W TRACTOR & EQUIPMENT COMPANY www.tec1943.com Alabama Alabaster • 205/621-2489 Anniston • 256/831-2440 Birmingham • 205/591-2131 Decatur • 256/355-0305 Dothan • 334/678-1832 Huntsville • 256/851-2222 Mobile • 251/457-8991 Montgomery • 334/288-6580 Tuscaloosa • 205/752-0621 Florida Panama City • 850/763-4654 Pensacola • 850/505-0550 Georgia Albany • 229/435-0982 Atlanta • 404-366-0693 Augusta • 706/798-7777 Calhoun • 706/879-6200 Columbus • 706/562-1801 Hoschton • 706/654-9850 Kennesaw • 678/354-5533 Macon • 478/745-6891 Savannah • 912/330-7500

A TRUSTEED NAME. “At Selge Constrruction, we’re a family business. ss. We’ve a wide range of pprojects, built on a foundation of integrity knowledge and qquality workmanship. Selge hass gained respect throughout the Midwest for the highest quality work built in the safest way possiible. Komatsu builds a quality product that performs as prom mised and helps us get the job done. Th why Komatsu woorks for me!”

Marv Selgge / Selge Construction, Inc. / Niles, MI M

That’s t s why hy I am K Koma matsu ts komatsuamerica.com

Page 54 • June 2, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

a i l Re

MORE E THA AN SANY excavators are made for long, hard days on the job. And we’re here to keep them m working - and you profitable. Backed by an industry-leading g 5-year warranty, SA ANY offers parts, service and su upport to make uptime a way of life. Visit sanya america.com to see for yourself.

THE IRONPEDDLERS 3504 N. Rocky River Road Monroe, NC 28110 800-438-1933 704-289-8591 30 Stoddard Garden Ct. Fountain Inn, SC 29644 864-409-1143 www.ironpeddlers.com

MECO MIAMI, INC. 5825 NW 74th Avenue Miami, FL 33166 305-592-4332 www.mecomiami.com

CENTRAL ATLANTA TRACTOR SALES, INC. 4240 Martin Luther King Jr Drive SW Atlanta, GA 30336 770-819-6600 www.centralatlantatractor.com

RICHARDSON SERVICE 1991 INC. 2667 U. S. 378, Conway, SC 29527 800-968-0754 www.rs91inc.com

TRAXPLUS 9800 Highway 503 Hickory, MS 39332 601-635-5543 www.traxplus.com

ATLANTIC COASTAL EQUIPMENT SALES & RENTAL 922 Longwood Drive Richmond Hill, GA 31324 912-459-1155 www.acesalesandrentals.com

EQUIPMENTSHARE 6575 Blanding Blvd. Jacksonville, FL 32244 904-654-2602 4235 Murfreesboro Pike La Vergne, TN 37086 615-488-4068 www.equipmentshare.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 2, 2021 • Page 55

www.companywrench.com

www.ScottCompanies.com Alexandria, LA 318-448-1647 Shreveport, LA 318-226-9696 Monroe, LA 318-388-9300

Little Rock, AR 501-455-5955 Ft.Smith, AR 479-648-1600

Springdale, AR 479-751-4242 Texarkana, AR 870-772-0204

Memphis, TN 901-547-8008 LaVergne, TN 615-793-3888 Jackson, MS 601-373-4600

3729 Frontage Road Lakeland, FL 33810 866-294-6103 863-937-6829

125 Wilson Mills Rd. Extension Smithfield, NC 27577 855-562-3526

141 Brickyard Rd. Lexington, SC 29072 866-262-4181 803-520-0032

11301 Reames Rd. Charlotte, NC 28269 980-859-4680

6325 Central Avenue Pike Knoxville, TN 37912 865-766-2571

www.highway-equipment.com 8071 Lee Highway Troutville, VA 24175 540-992-4650

Page 56 • June 2, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Registration Opens for GIE+EXPO 2021 as October Event Returns in Person

BROOKS SALES, INC. www.brookssales.com 3144 Hwy 74 East • Monroe, NC 28112 704-233-4242

CREEL TRACTOR CO. www.creeltractor.com

Registration is open, and plans are under way for GIE+EXPO to bring the industry back together in person this October. Both attendees and exhibitors have indicated they are eager to participate in the annual trade show, which is set for Oct. 20 to 22 at the Kentucky Exposition Center. Online registration — only $20 through Sept. 9 — is available at gie-expo.com. As of April, 675 companies had already signed on to exhibit at GIE+EXPO and the co-located Hardscape North America — an 18 percent increase over the same time in 2019. More than 70 are new exhibitors. And, with the expo center’s recent renovations to the demo area, exhibitors are looking forward to showcasing their latest innovations outdoors where attendees can test drive equipment. “We look forward to attending the GIE+EXPO every year and are eager to get back to the show in 2021,” said Chris Durig, VP of sales, BlueBird Turf Products. “It is the only industry show that provides an audience of distributors, dealers and landscapers at a single event. Additionally, it is the only industry show that provides opportunities for an indoor exhibit as well as outdoor product demonstrations.” Warren Sellers, show manager, said attendees also are ready to gather in person. According to a recent survey of past attendees, 91 percent of landscape professionals and 84 percent of dealers are likely to attend this year.

3771 Palm Beach Blvd. • Fort Myers, FL 33916 239-694-2185 • Fax: 239-694-6059

CROSBY EQUIPMENT COMPANY, INC. www.crosbyequipimentco.com 1826 South Peterson Ave. • Douglas, GA 31535 915-384-4664

RJV KUBOTA www.rjvequipment.com Nashville 140 Charter Place • LaVergne, TN 37086 615-793-7576 Knoxville 3356 Rudy Street • Knoxville, TN 37921 865-970-2840

LINDER TURF & TRACTOR www.lindertt.com

The annual GIE+EXPO trade show is set for Oct. 20 to 22 at the Kentucky Exposition Center.

“GIE+EXPO has always been a good way to check up on the competition, to see what’s new and talk to the manufacturers of the products we sell,” said Sam Walter, president of Sam Walter & Son Inc. in Fairbury, Ill. “We can’t wait to get back to the show in 2021.” With expanded education on realworld topics such as drones, robotics and connectivity, as well as features that put attendees behind the controls, this year’s show will offer a wide range of dynamic opportunities, including: • Hands-on Drone Zone where attendees can fly drones with expert trainers • Technology Summit presented by

Registration is open, and plans are under way for GIE+EXPO to bring the industry back together in person this October.

the National Association of Landscape Professionals • UTV test track • Remote Pilot Certification Course presented by the Indiana State University Aviation and Unmanned Systems program • Expanded in-tree arborist demonstrations and classroom courses, including CEU opportunities • Opening keynote, “Leadership and a New World Order: The Need for Resilience,” featuring retired U.S. Navy 4-star Admiral James Stavridis • Free dealer workshops by Bob Clements International, including a discussion on “Bulletproofing Your Business” “Despite the pandemic, business never stopped for those who design, install and maintain living landscapes. While this year’s show will look different, we can’t wait to welcome everyone back to Louisville,” said Kris Kiser, managing partner of GIE+EXPO and OPEI president. “We understand how important GIE+EXPO is to our industry, and we are committed to providing the education, resources and networking businesses need to thrive.” Recently named the sixth largest trade show in the nation, GIE+EXPO is sponsored by the Outdoor Power Equipment Institute Inc. (OPEI), Professional Grounds Management Society (PGMS) and National Association of Landscape Professionals (NALP). For more information, visit gieexpo.com. 

250 North Church Street • Burlington, NC 27212 336-792-3412 1501 N. Memorial Drive • Greenville, NC 27834 252-695-6200 5504 15th Street E • Bradenton, FL 34203 941-755-5722

GROWERS EQUIPMENT CO. www.growersequipment.com 2695 Davie Road • Davie, FL 33314 954-916-1020 4801 NW 77th Avenue • Miami, FL 33166 305-592-7890

MASON TRACTOR COMPANY www.masontractor.com 1050 Appalachian Hwy • Blue Ridge, GA 30513 706-632-3777 2510 Dahlonega Hwy • Cumming, GA 30040 770-887-6119 395 Industrial Blvd. • McDonough, GA 30253 770-957-3370 5038 Buford Hwy. • Norcross, GA 30071 770-582-0377

RICHARDS TRACTOR AND IMPLEMENTS www.ritrac.com 1995 N.E. 8th St. • Homestead, FL 33033 305-247-8711

COASTAL MACHINERY COMPANY www.coastalmachinery.com 6701 Mobile Highway • Pensacola, FL 32526 850-944-2002 • 800-476-1130

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 2, 2021 • Page 57

Page 58 • June 2, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

REACCH NEW W

HE EIGH T TS IN PRRODUCTTIVI Manitowoc crawler c cranes are built to unsurpassed d productivity and value on challenging jobsites. j Manitowoc delivers: d > Cranes ranging from 73 t ((80 USt) U ) to 23 > Capacity-enhancing VPC-MAX X® techno attachmen nts > Optional lo ong-reach booms, fixed jibs, extended upper u boom points > Optional 3..5 m wide boom inse erts for M

man nitowoc.com woc.com

www.ringpowercrane.com St. Augustine, FL 904-737-7730

Pompano Beach, FL 954-971-9440

Orlando, FL 407-855-6195

Tampa, FL 813-671-3700

Miami (Int. Sales) 305-477-8717

Union City, GA 770-774-7300

Concord, NC 704-795-3636

Ladson, SC 843-818-1954

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 2, 2021 • Page 59

Hitachi’s after sales solutions provide you with all the tools you need to manage your total cost of ownership quickly and easily, whenever and wherever you are. Utilize Hitachi’s Technology Programs and Apps to: ࠮ ,_[LUK LX\PWTLU[ SPML ࠮ 4HUHNL WYL]LU[H[P]L THPU[LUHUJL THJOPUL LɉJPLUJ` HUK VWLYH[VY WYVK\J[P]P[`

࠮ 4HUHNL `V\Y VWLYH[PUN JVZ[Z M\LS JVUZ\TW[PVU HUK VWLYH[VY LɉJPLUJ` PU [OL ÄLSK

*VU[HJ[ `V\Y SVJHS /P[HJOP ÔLLS SVHKLY KLHSLY VY ]PZP[ \Z H[ OP[HJOPÔLLSSVHKLYZ \Z `V\Y[VVSZ [V SLHYU TVYL HIV\[ [OL MVJ\ZLK /P[HJOP HWWYVHJO [V Z\WWVY[PUN `V\ `V\Y I\ZPULZZ HUK `V\Y /P[HJOP ÔLLS SVHKLYZ

CCS EQUIPMENT SALES

CLM EQUIPMENT CO., INC.

www.ccsequipment.com

www.clmequipment.com

Raleigh/Durham, NC • 919-556-9110 Angier, NC • 919-935-0505 Greenville, NC • 252-712-1033

Lafayette, LA • 337-837-6693 Lake Charles, LA • 337-625-5942 Houston, TX • 281-598-2500

GSE GREAT SOUTHERN EQUIPMENT COMPANY www.gsequipment.com

Dealer Imprint Area Tampa, FL • 866-586-8956 Pompano Beach, FL • 954-327-8808 Ft. Myers, FL • 239-334-6063 Tallahassee, FL • 850-574-0892 Orlando, FL • 407-859-9160 Jacksonville, FL • 904-268-4400

REPUTATIONS ARE BUILT ON IT A FULL LINE OF WHEEL LOADERS

• 14 Models • 25 HP – 520 HP

Hitachi Construction Machinery Loaders America Inc. hitachiwheelloaders.us/yourtools

HEAVY MACHINES INC.

LINK-BELT MID ATLANTIC

www.heavymachinesinc.com

www.link-beltmidatlantic.com

Memphis, TN • 800-432-8902 Shreveport, LA • 800-548-3458 Gray, TN • 855-201-7453 825 31st Street North Birmingham, AL 205-323-6108 • 844-344-8658

Ashland, VA • 866-955-6071 Chesapeake, VA • 800-342-3248

Page 60 • June 2, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

DESIGNED TO DOMINATE. POWERED BY INNOVATION.

AUTHORIZED DOOSAN DEALERS

ARKANSAS

GEORGIA

SOUTH CAROLINA

NORTH CAROLINA

AL MA TR ACTO R & E Q U IPME N T 479-632-6300 doosandealers.com/Alma

S Y NER GY EQ UIPMEN T 478-219-5880 doosandealers.com/Byron

B OB C AT OF COLUMB IA 803-933-9996 doosandealers.com/Columbia-SC

ACT CO N STRUCT IO N E QUIPME NT 800-462-2447 doosandealers.com/Asheville

678-503-5006 doosandealers.com/Forest-Park

B OB C AT OF G REEN VILLE 864-269-3600 doosandealers.com/Piedmont

LI F T TRU C K S E RV I C E S 501-568-3330 doosandealers.com/Little-Rock

LOUISIANA E Q U I PME N T IN CO R PO R ATED 318-674-8824 doosandealers.com/Shreveport

912-335-6577 doosandealers.com/Garden-City 470-238-0900 doosandealers.com/Kennesaw 678-506-8751 doosandealers.com/Lawrenceville

800-462-2447 doosandealers.com/Charlotte

B OB C AT OF S PA RTA N B URG 864-342-9003 doosandealers.com/Spartanburg S YN ERGY EQUIPMEN T 843-405-4824 doosandealers.com/North-Charleston

800-462-2447 doosandealers.com/Wilmington 800-462-2447 doosandealers.com/Winston-Salem

New -7 Series wheel loaders, now available from your local Doosan® dealer. Learn more at NA.DOOSANEQUIPMENT.COM

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 2, 2021 • Page 61

ALABAMA E Q U IPME N T I N CO R PO R ATED 251-443-5533 doosandealers.com/Theodore

Doosan Bobcat Develops New Mobile Training Lab to Meet Skills Demand

239-334-4987 doosandealers.com/Fort-Myers

In order to meet the growing demand for skilled welding experience to every employee without distractions from the professionals, Doosan Bobcat has developed a mobile train- production floor, along with the flexibility to go directly from a classroom environment to hands-on training in secing lab. The lab is currently based in Litchfield, Minn., and will be onds. In addition, being able to pack up and move from locatraveling throughout Doosan Bobcat’s North America facto- tion to location as needs arrive is a business-centered and ry locations later in 2021 to bring comprehensive weld train- agile approach to training,” Morlock said. Novice to advanced training programs are provided, and ing to new and existing employees. As an economical, consistent and efficient solution, the lab provides innovative to date 160 Doosan Bobcat employees have be trained.  opportunities to cultivate the next generation of skilled labor professionals. The lab comes equipped with a climate-controlled classroom style learning area with welding bays for up to six students at a time. The welding equipment mirrors the same units that Bobcat uses at its production facilities. Steve Morlock, manufacturing trainer at Doosan Bobcat, used his deep welding leadership experience to standardize the training curriculum across the company’s production facilities. “The training lab allows us as an organization to be more flexible when planning skills for operational needs. The lab comes equipped with a climate-controlled classroom style learning We can now provide a better training area with welding bays for up to six students at a time.

305-362-6632 doosandealers.com/Miami

New Legislation...

407-273-7383 doosandealers.com/Orlando

Social Media, Ad Campaign Pushes for Economic Growth Via Infrastructure

R & M E Q U IPME N T R EN TA L S 205-326-1111 doosandealers.com/Birmingham SY N E R GY E Q U I PM EN T 334-744-5335 doosandealers.com/Dothan

FLORIDA B O B C AT O F JACKS O N V I LLE 904-288-9181 doosandealers.com/Jacksonville COA STA L M AC H I N E RY 850-944-2002 doosandealers.com/Pensacola SY N E R GY E Q U I PM EN T 954-256-0583 doosandealers.com/Pompano-Beach 386-274-1002 doosandealers.com/Daytona-Beach

813-626-3470 doosandealers.com/Tampa

MISSISSIPPI E Q U IPME N T I N CO R PO R ATED 601-296-2546 doosandealers.com/Hattiesburg 601-948-3272 doosandealers.com/Richland

TENNESSEE B O B C AT O F CL A R K SV I LLE 931-436-9555 doosandealers.com/Clarksville B O B C AT O F N A S H V I LLE 615-941-4000 doosandealers.com/Nashville

VIRGINIA ACT CO N ST RU C T I O N E Q U IPME N T 800-462-2447 doosandealers.com/Roanoke

The transportation construction, labor and business community are jointly launching an ad and social media campaign to push for action this year by Congress and the Biden administration on a transportation infrastructure investment package that improves mobility and fuels economic growth. Beginning April 12, a television spot will run inside the Beltway aimed at members of Congress, staff and other policymakers. The TV commercial will be supplemented by online ads that began April 10 on social media and influential digital sites popular with D.C. legislators and influencers. The campaign will extend on April 26 with online social media and website advertisements running in the states and districts of 22 key members of Congress. The ads will run during congressional recesses. The central message of the “Moving Forward” campaign: investing in trans-

portation infrastructure is crucial to continuing the U.S. economic recovery and creating jobs. The ads direct viewers to a landing page on the Transportation Construction Coalition website where the economic benefits of transportation infrastructure investment are spelled out. The television spot and samples of the digital ads are available at FundInfrastructureNow.org. The campaign is an initiative of the Transportation Construction Coalition (TCC) and U.S. Chamber of Commerce-led Americans for Transportation Mobility (ATM) coalition. The TCC and ATM ads will run through late May. About Transportation Construction Coalition Established in 1996 and co-chaired by the American Road & Transportation Builders Association

(ARTBA) and the Associated General Contractors of America (AGC), the 31 associations and labor unions that make up the TCC have a direct market interest in the federal transportation program. A complete list of members can be found at: www.transportationconstructioncoalition.org. About Americans for Transportation Mobility (ATM) The Americans for Transportation Mobility (ATM) coalition was established by the U.S. Chamber of Commerce in 2000. It brings together businesses, the labor and union sectors, transportation stakeholders and the public to advocate a robust transportation infrastructure grid in the United States. This includes promoting ongoing and sustainable funding through policies and broad-based initiatives. 

Page 62 • June 2, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Toys For Boys (and also men) Realistic Scale Models of Construction Equipment, ideal gifts for the Holidays, Birthdays, Graduation, etc.

Grove TM9120 White Truck Crane, 1:50 scale - $175

Grove TM1500 Truck Crane with Lattice Boom, 1:55 scale - $125

Schwing Truck Mounted Concrete Pump, 1:50 scale - $110

Hyundai 290LC-3 Excavator, 1:50 scale - $100

Komatsu D475A Dozer w/ripper, 1:50 scale - $100

Komatsu PC650 Hydraulic Shovel, 1:50 scale - $100

Volvo BM A25B Articulated Truck, 1:50 scale - $100

Caterpillar 988B Wheel Loader, 1:50 scale - $85

Caterpillar 12G Motor Grader, 1:50 scale - $75

Conexpo 2008 Silver Edition AEM Wheel Loader, 1:50 scale - $75

Caterpillar 215 Excavator, 1:50 scale - $75

Grove MZ 76 Manlift, 1:50 scale - $75

Liebherr 921 Wheeled Excavator w/clamshell bucket, 1:50 scale - $60

Caterpillar 416 Backhoe/Loader, 1:50 scale - $60

John Deere 850J Dozer w/ripper, $50

Caterpillar 953 Traxcavator, 1:50 scale - $60

Shipping and Handling Included

WE PURCHASE COLLECTIONS!!!

Bmckeon Collectibles

Contact – Barry McKeon

470 Maryland Drive Fort Washington, PA 19034

610-506-5961 Email – bmckeon9@gmail.com

Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 2, 2021 • Page 63

mhl 375 F -SERIES

Company Wrench www.companywrench.com 3729 N Frontage Road Lakeland, FL 33810 863-937-6829 11301 Reames Road Charlotte, NC 28269 980-859-4680 125 Wilsons Mills Road Ext Smithfield, NC 27577 919-938-8145

STRONG. RELIABLE. E EFFICIENT.

141 Brickyard Road Lexington, SC 29072 803-520-0032

Discover Morre Fuchs World- Class Material Handlers

Highway Equipment Company www.highwayequipment.com Roanoke Location 8071 Lee Highway Troutville, VA 24175 540-992-4150

Page 64 • June 2, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Sen. Lindsey Graham Says Construction Will Be Heart of Infrastructure Bill MAULDIN from page 8

and then assemble and sell these products,” Calder noted. “Most of our equipment is designed for the small commercial work that is done all over the U.S. and Canada. Ninety percent of asphalt manufactured is used to build roads and bridges.” “Your company is in the high-end of the food chain as far as skilled labor, then,” Graham asked. “Yes, our industry pays 35 percent above the national average,” Calder responded. “A trained welder, for instance, will make $23 to (L-R) are Cameron Calder; Glen Calder; Wayne Calder; Sen. Lindsey $25 an hour and we offer a full host of health Graham; David Calder; Johan “Kip” Eideberg, AEM; Brian Bieller, and retirement benefits. Our top hourly pay Dynapac. is $28 per hour.” The senator was impressed in hearing that, saying, “Those schools for their career days. We also have a standing policy that if a kid wants to try welding or machining, they can are good jobs.” When Graham inquired about how existing U.S. steel tar- spend a day here to learn a bit about those professions.” iffs have affected Mauldin and other AEM-member compaGraham, AEM Ready for nies, Calder answered by saying, “My steel pricing has gone Economic Jump-Start from 33 cents a pound to over 90 cents a pound. We are Later, in his public remarks in the Mauldin factory, understanding that this latest price increase has more to do with the uncertainties over whether the current tariffs will Graham said that in discussing the infrastructure bill with the continue or not. The steel producers are unwilling to load up asphalt equipment maker and the AEM he better understands on inventory that could be on the wrong side of the tariff if it the ramifications of passing a legislation that is properly funded to overhaul the American road, bridge, port and rail goes away. Calder also said that the equipment manufacturing busi- systems. “The AEM and its members have told me that if Congress ness was robust before the pandemic hit in early 2020. “It was very steady and solid and increasing every year can pass an infrastructure bill it would do more to jump-start until COVID-19,” he told the senator. “An infrastructure bill this part of the economy than any other single thing,” he would help our industry directly and all manufacturers in remarked. “That is what we are trying to push for the coungeneral for us to be more competitive globally. To pay the try. It would be a big benefit to the employees in this busiwages that we pay, a world-class infrastructure should ness.” Graham said the demand will go up for all of Mauldin accompany those wages to compete against countries with Paving’s equipment to fix and repave, not only South much lower wages.” Carolina’s roads and bridges, which are badly in need of repair, but also those across the country. Finding Workers — an Industry Headache In answer to a reporter’s question about bolstering the The AEM also hoped that provisions for job training for people wanting to work in its industries would be included country’s cyber security in the wake of the Colonial Pipeline ransomware attack earlier in May, which caused long lines in the comprehensive infrastructure bill. If that were to happen, Calder believed it would help solve and shutdowns for consumers at the gas pumps, Graham a daily worry about the shortage of qualified factory workers, acknowledged that the attack exposed the need to diversify the pipelines and strengthen their protections. such as machinists and welders. Such measures could possibly be accomplished within the “We currently recruit from all over [Upstate South Carolina] and from the technical schools,” he noted. “We are infrastructure bill. “Clearly, a single source is not good. It proves a cyber– partnering with them on welder training to get more employees. Mauldin Paving has 75 employees now, back to where Pearl Harbor could happen, a massive attack on multiple we were prior to when the 2008 recession hit, when we laid fronts that could shut us down as a nation,” the senator said. off about half our workforce. But we still need to find people “The best way to prevent that is to be strong and to let other to hire. I could hire about five welders and five assemblers countries know, like Russia, who allow these criminals to operate with impunity, that we will hold them accountable right now.” He added that several of his workers attended a machine for the next cyber-attack coming from Russian soil. Without trade school and have become invaluable to the manufactur- that, these attacks will keep continuing.” In closing, Graham remarked, “So, my hope is that someer. “So, are we including all the paths to success, not just col- time this year, Republicans and Democrats can do something lege, when they get out of high school?” he said to Graham. other than yell at each other and find a way to help the econ“Are we encouraging them along a path to become machin- omy grow. Now is not the time to raise taxes, people have ists and welders? I find, in our experience, that they get lost been hurting for the last year or so, so let’s get folks back to for several years before they wake up one day and decide work again and show the world that the best place to do busiwhat they want to do. Mauldin has sent welders to the high ness is still in America.”  CEG

FLORIDA KELLY TRACTOR

LOUISIANA LOUISIANA CAT

www.kellytractor.com Miami 305-592-5360 Davie 954-581-8181 West Palm Beach 561-683-1231 Clewiston 863-983-8177 Ft. Myers 239-693-9233

www.louisianacat.com Alexandria 318-443-2577 Baton Rouge 225-296-0020 Belle Chase 504-433-1350 Bossier City 318-746-2341 Hammond 985-340-2820 Lafayette 337-837-2476 Lake Charles 337-439-3601 Monroe 318-323-1345 Praireville 225-673-3480 Reserve 985-536-1121 St. Rose 504-904-7421

RING POWER www.ringpower.com St. Augustine 904-737-7730 Brooksville 352-796-4978 Daytona Beach 386-947-3363 Gainsville 352-371-9983 Jacksonville 904-714-2600 Lake City 386-755-3997 Lakeland 863-606-0512 Ocala 352-732-2800 Orlando 407-855-6195 Palm Bay 321-952-3001 Sarasota 941-359-6000 Tallahassee 850-562-2121 Tampa 813-671-3700

MISSISSIPPI THE CAT RENTAL STORE AT THOMPSON MACHINERY TMRents.com Columbus 622-244-4610 Greenwood 662-459-7210 Belden 622-842-4322

SOUTH CAROLINA BLANCHARD MACHINERY www.blanchardmachinery.com West Columbia 803-791-7100 Simpsonville 864-963-3645 Rock Hill 803-324-9600 Florence 843-678-8520 Summerville 843-871-2001 Myrtle Beach 843-399-2074 Hilton Head 843-784-6766

TENNESSEE THE CAT RENTAL STORE AT THOMPSON MACHINERY TMRents.com Nashville 615-291-5444 Memphis 901-362-8883 Clarksville 931-905-3902 Jackson 731-988-4259

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 2, 2021 • Page 65

GEORGIA YANCEY BROS. CO. www.yanceybros.com Austell 800-282-1562 Albany 800-768-2892 Augusta 800-446-5131 Bloomingdale 800-482-1144

Brunswick 800-299-5010 Calhoun 800-752-9804 Columbus 800-633-5240 Dacula 800-545-2945 Macon 800-633-5180 McDonough 888-926-2392

Savannah 800-755-8382 Statesboro 888-764-6506 Valdosta 800-755-6841 Washington 888-678-3211 Waycross 888-948-2443

NORTH CAROLINA CAROLINA CAT Serving Western North Carolina 800-277-2080 www.carolinacat.com Greensboro 336-294-5240 Charlotte - Main 704-596-6700 Charlotte - North 704-921-1178 Charlotte - South 704-401-5635

Monroe 704-292-1555 Hickory 828-464-7045 Asheville 828-251-2500

GREGORY POOLE EQUIPMENT COMPANY www.gregorypoole.com Raleigh 919-828-0641

Mebane 919-568-7500 Washington 252-946-1081 Fayetteville 910-424-4400 Wilmington 910-371-6301

Page 66 • June 2, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

LLO OAD OA AD D UPUP U TO T

The Easy Way To Advertise Your Equipment Run In Two Consecutive Issues – Black & White $135 • Color $195

w Rate Finance 0% Low Options Available

Operating Cappacity 1,050 to 4,2000 lbs.

35 - 120 hp options

17 Loaders

CONTTACT A YOUR LOCAL GEHL ACT GEH HL DEALER R TODA AY! Y!

Sentry Tires - Skid Steer and Wheel Loader Tires at Volume Buyers Prices! Call Company Wrench for Sizes & Pricing 11-12 EB Call 866-294-6103

SEVERE SERVICE ASPHALT CUTTERS (15 Models Available) Starting @ $1450.00 www.attachmentsintl.com attintl@loretel.net or Call Us @ (218) 863-6444 10-11 AP

Here's how the BARGAIN ADS Work: • Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 20 word description, plus contact and phone number.

DON ALLISON EQUIPMENT, INC. www.donallisonequipment.com 233 Melville Road, Arley, AL 35541 800-669-6450 • 205-387-1600

• Either email your copy & photo to: production@cegltd.com, or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034. • Cost is $135 per ad, $60 additional for color. • Your ad will run for two consecutive issues in 1 region. Your Ad Will Be Seen By Over 21,969 Construction Equipment Buyers in the Southeast States.

For more information, call Construction Equipment Guide today at *AT PARTICIPATING DEALERS. EXPIRES .3 .21

EMPLOYMENT OPPORTUNITY Mobro Marine, Inc.

HELP

800/523-2200

SOLID DESIGN SOLID DES SIGN

WA N T E D

Mechanics - Welders - Painters We have MULTIPLE positions available for the following:

Crane mechanics for American and Kobelco models Certified boom lacing welders Machinery painters Each position should have at least 2 yrs. experience.

For more information, please contact Service Manager Tim Shaheen: Office: 904-284-9670 Cell: 904-759-0500 tshaheen@mobromarine.com www.mobromarine.com

Business Calendar To view our Business Calendar online, go to www.constructionequipmentguide.com. JUNE/JULY 2021 CRANE SAFETY COURSES June 8 – June 10, 2021 Forklift Operator Train The Trainer, Orlando, FL June 8 – June 10, 2021 Aerial Work Platform Train The Trainer, Houston, TX June 14 – June 17, 2021 Overhead Hoist Maintenance Training, Houston, TX June 15 – June 18, 2021 Mobile Crane Inspector Training, Orlando, FL June 21 – June 25, 2021 Mobile Crane Train The Trainer, Houston, TX June 22 – June 24, 2021 Rigging Inspector Training, Cincinnati, OH June 22 – June 25, 2021 Overhead Crane Train The Trainer, Orlando, FL June 28 – June 29, 2021 Qualified Signal Person Training, Houston, TX June 28 – June 29, 2021 Crane Assembly & Disassembly Director Training, Orlando, FL June 30 – July 1, 2021 Critical Lift Planning & Lift Director Training, Houston, TX June 30 – July 2, 2021 Qualified Rigger Level 2 Training, Orlando, FL July 6 – July 8, 2021 Forklift Operator Train The Trainer, Orlando, FL July 6 – July 9, 2021 Mobile Crane Inspector Training, Houston, TX July 13 – July 15, 2021 Boom Truck Operator Train The Trainer, Houston, TX To register and for more information, please call or email Tiffany Alston. Telephone: 800/654-5640, extension 238. Direct: 321/710-4641. Email: talston@cranesafe.com

EXHIBITS: Original equipment manufacturers from around the world and exclusive U.S. distributors of equipment, tools, products and services for the commercial construction, concrete and masonry industries. WOC attracts approximately 1,500 exhibiting companies and occupies more than 700,000 square feet of indoor and outdoor exhibit space. WHO ATTENDS WOC? More than 60,000 industry professionals from all around the world, representing all segments of the construction industry: Commercial Contractors, Concrete Contractors, Concrete Pumpers, Construction Managers, Dealers/Distributors, Decorative Concrete Contractors, Designers and Specifiers, General Contractors, Block/Segmental Unit Producers Masonry Contractors, Architects, Engineers, Block Producers, Ready Mix Producers, Rental Equipment Centers, Repair Contractors, Residential Contractors, Specialty Concrete Contractors, Precast, Pipe and Block Producers, Precast/Prestressed Producers, and more. NEW FOR 2021! Cement Production Pavilion (North Hall): Features the leaders of the equipment and support services used in cement processing: kilns, separators, mills, dryers, silos, bagging, automation & instrumentation. Registration for WOC 2021 is now open. PLEASE BE ADVISED: There will be no onsite registration this year due to new COVID safety protocols. You MUST REGISTER ONLINE before coming to the show. Visit www.worldofconcrete.com for more information and registration. Registration questions? Call Registration at 866.860.1983 or email Registration@WorldofConcrete.com. HAYDEN-MURPHY New Location Grand Opening Dates: June 24, 2021 Times: 11:00 a.m. to 4:00 p.m. Lunch served 11:00 a.m. to 2:00 p.m. Location: Twin Ports 329 2nd Street, Industrial Building 145 Proctor, MN 55810 Description: Come celebrate Hayden Murphy’s new location at their Open House! They will have door prizes, lunch and a drawing for (2) $2,000 dollar vouchers towards any rental!.

ASSOCIATED BUILDERS AND CONTRACTORS (ABC) 2021 Inclusion, Diversity and Equity Summit - Virtual Event Dates: June 14, 2021 Times: 11:00AM - 6:00PM EST Speaker: Doug Harris CEO of the Kaleidoscope Group Description: ABC's virtual Inclusion, Diversity and Equity Summit will explore the complexity of IDE in today's world and evaluate its historical journey and sustainable future in the conWORLD OF CONCRETE (WOC) struction industry. World of Concrete 2021 Doug Harris, CEO of the Kaleidoscope Group, will lead attendees in an interactive, and virDates: June 8-10, 2021 Education: June 7-10, 2021 tual discussion on fostering inclusion and ultimately achieving exceptional business outTimes: 9:30 am - 5:00 pm comes. Location: Las Vegas Convention Center Description: World of Concrete is the commercial construction industry’s largest annual Registration is now open. The fee for this event is $99. international event for concrete and masonry professionals and puts these kinds of immer- The registration deadline is June 10, 2021. sive opportunities at your fingertips—join your community here and experience real, tangible For more information and to register for this event, please visit https://diversity.abc.org/idesummit results. Hands down, the best decision you'll make.

Events are subject to change, check websites for updates

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 2, 2021 • Page 67

MORE M POOWERR reliable, undeniable performanc ce. With Doosan Portable Power e on your side, you can Make Power Moves. See the full lineup at DoosanPowerMoves.com/Portab blePower.

AIR COMPRESSOR SALES

PINNACLE CENTRAL COMPANY, INC.

RICHMOND MACHINERY

www.aircompsales.com GEORGIA 5490 Thomaston Road Macon (478) 474-8460

www.pinnaclecentral.com FLORIDA 103 Bryan Street Jacksonville (904) 354-5746 Polk City (888) 253-2444

www.richmondmachinery.com VIRGINIA 1701 Roseneath Road Richmond (804) 359-4048

MAKE POWER MOVES.

Page 68 • June 2, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

BUILDING A BETTER WORK FORCE ONE CANDIDATE AT A TIME

Marc Murphy, VP of Construction

WHEN YOU NEED QUALITY, BUT CAN’T AFFORD TO WAIT Our placement success in the construction disciplines spans the entry-level, middle and senior management and executive levels in the following areas: Project Managers and Superintendents Project Sales Engineers Controls and Project Engineers Estimators Service and Project Sales Construction Managers

CFOs, CEOs, CDOs General Managers Service Managers Sales Managers Sales Training Managers

CONSTRUCTION

Corporate Headquarters 1275 Drummers Lane, Suite 103 • Wayne, PA 19087

Call Today: 610-941-0100 • Email: info@magellangroup.com

www.magellangroup.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 2, 2021 • Page 69

Attention Contractors! Post Your Wanted To Buy Listings FREE! Here’s How! List Your Wanted Items. If you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted-to-buy and enter your listings. Inappropriate or Sale Ads will be Deleted WANTED (US): CATERPILLAR 420D WHEEL LOADER – NEED TO BUY ANY BACKHOE. ALSO LOOKING FOR EXCAVATOR AND WHEEL LOADER. EMAIL: GCESMARKETING8@GMAIL.COM; PHONE: 657-236-7399 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): HITACHI EXCAVATORS - NEED TO BUY HITACHI EX 400-1 AND EX 450-5, ALSO LOOKING FOR ZAXIS 200 AND EX 300-1 AND EX 270-1, PLEASE LET US KNOW. EMAIL: IKRAMKHAN@IUKANDCO.COM; PHONE: +923331234598 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): HITACHI EXCAVATORS, ALL MODLES. I NEED TO BUY CAT USED WHEEL LOADER 916,926,936,950B/E,966E/D/F, 970F, 980C,980F ALSO CAT MOTOR GRADERS 140G,12G/H, 14G/H, 140H, 14M AND HITACHI EXCAVATORS ZX 200-1, EX 270-1, EX 300-1, EX 400-1 AND EX 450-5. (RUNNING OR NON-RUNNING MACHINES). REGARDS AHMED, SALES/PURCHASE MANAGER WWW.IUKANDCO.COM EMAIL: AHMED@IUKANDCO.COM; PHONE: +923003695360 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 926M WHEEL LOADERS - LOOKING TO BUY ANY USED CONSTRUCTION *ANY CONDITION* EMAIL: SEARCHT930@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR 12H MOTOR GRADER - I`M LOOKING TO BUY ANY CAT 12H, ANY CONDITION EMAIL: NANI@EAGLEEQUIPMENT.CO; PHONE: 240-397-8180 –––––––––––––––––––––––––––––––– WANTED (US): HITACHI EX270LC EXCAVATORS - LOOKING FOR USED HITACHI EXCAVATORS LIKE EX200, EX270, EX300, EX330, EX400, EX450. EMAIL: ILYAS.MTCPK@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): FIAT-HITACHI EXCAVATORS – LOOKING FOR PARTS AND FINAL DRIVES FOR FX310 FIAT HITACHI EXCAVATOR. EMAIL: STILLINN43@YAHOO.COM; PHONE: 973-277-3631 –––––––––––––––––––––––––––––––– WANTED (US): JOHN DEERE 700K LGP CRAWLER DOZERS – WANT TO BUY FROM USER OR BANK REPOSSESS WITH WINCH OR NOT. UNDER 900 HOURS ONLY, NO WEB BUDGET UNDER $85000.00CDN - NO JUNK NO HACKER CONTRACTORS OR PAYMENT OUT. EMAIL: JEANMAURICEBOUTIN@ VIDEOTRON.CA; PHONE: 1 450 346 8975 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 140G MOTOR GRADERS – NEED TO BUY CAT 140G MOTORGRADERS 1988 OR UP .. ANY CONDITION. OFFER IT US. EMAIL: IUKANDCO@GMAIL.COM; PHONE: 03335555360 ––––––––––––––––––––––––––––––––

WANTED (US): BOBCAT SKID STEER LOADERS – (2) 1978 OR 1979 BOBCAT 825 SKID STEER LOADERS - WITH PERKINS DIESEL ENGINES. CALL 412-571-2500, ASK FOR KEITH –––––––––––––––––––––––––––––––– WANTED (US): KOMATSU D475A-5E0 CRAWLER DOZER. EMAIL: TONYTHOMAS@ PACIFICCRANES.COM –––––––––––––––––––––––––––––––– WANTED (US): SKELETON – SKELETON – SKELETON BUCKETS. WANTED AND AVAILABLE. CALL US WITH WHAT YOU HAVE. SKELETON BUCKETS NEEDED FOR ALL MAKE/MODEL EXCAVATORS AND WHEEL LOADERS. EMAIL: PERCY@RANSOME-EQUIP.COM; PHONE: 215-350-1165 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR WHEEL LOADERS; NEED TO BUY CAT WHEEL LOADERS ANY CONDITION LIKE CAT 930, 926, 950B, 966E, AND 966F. EMAIL: IKRAMKHAN@IUKANDCO.COM –––––––––––––––––––––––––––––––– WANTED (US): CONCRETE PUMPS – SCHWING, PUTZMEISTER, ALLIANCE, ELBA,CONCORD, PUMPSTAR, ETC. ALL MODELS, BRANDS & SIZES. OLD OR NEW!!! BOOM PUMPS, TRAILER & TRUCK MOUNTED CITY PUMPS PURCHASED. OLD, RETIRED, NO LONGER USED & PARTS AND TRUCK MOUNTED PUMPS PURCHASED. EMAIL INFORMATION. INSTANT PAYMENT GUARANTEED. FINDERS FEES PAID!!! EMAIL: BBENEDETTO @ COMCAST.NET –––––––––––––––––––––––––––––––– WANTED: HITACHI EXCAVATORS CURRENTLY LOOKING FOR HITACHI EX300LC-5 , EX330LC-5 , EX400LC , EX450LC , ZX400LC AND EX270LC. KINDLY SEND US YOUR OFFERS IF ANY AVAILABLE. THANKS. EMAIL: SALES.INTLBROKERS@GMAIL.COM; PHONE: +923149984807 –––––––––––––––––––––––––––––––– WANTED (US): HITACHI EXCAVATORS LOOKING TO BUY EX200LC,EX270LC,EX400LC. EMAIL: ILYAS.MTCPK@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): HITACHI EXCAVATORS WE NEED THE FOLLOWING HITACHI EXCAVATORS: EX200, EX270, EX300, EX400, EX450. IF YOU HAVE ANY UNITS AVAILABLE PLEASE LET ME KNOW. EMAIL: FAIZKHAN0316@GMAIL.COM; PHONE: 03332925108 –––––––––––––––––––––––––––––––– WANTED (TN): GOOD USED ENGINE 14425 FOR A KOMATSU TRACKLOADER. MODEL D57S-1 ENGINE MODEL S4D130-1 SERIAL 07164 OF TRACK-LOADER HP135 @ 1900RPM. EMAIL: BOBSTOUT55@YAHOO.COM; PHONE: 423-727-7924 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR D4E CRAWLER DOZER - LOOKING FOR A GOOD D4E PERFERABLY WITH STRAIGHT BLADE AND TILT. EMAIL: A.SANDRA@SBCGLOBAL.NET ––––––––––––––––––––––––––––––––

WANTED (US): CAT 966F & CAT 966F II. IF ANY ONE HAS ONE AVAILABLE PLEASE LET ME KNOW. THANK YOU. EMAIL: AHMED@IUKANDCO.COM; PHONE: 03350237541 –––––––––––––––––––––––––––––––– WANTED (US): HITACHI EX 450 CRAWLER EXCAVATOR. EMAIL: IKCEQUIPMENTS@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: CATERPILLAR 12H MOTOR GRADER - PLEASE I NEED ANY 12H. EMAIL: NANI.SAADAN@YAHOO.COM PHONE: +1 240-397-8180 –––––––––––––––––––––––––––––––– WANTED (US): KOMATSU D65EX-17 CRAWLER DOZER. WANT TO BUY BULLDOZER FROM USER ONLY KOMASTU 65EX 17 WITH RIPPER UNDER 2000 HOURS; MY BUDGET IS UNDER $85000 CDN. OR 700JXL WINCH UNDER 500 REAL HOURS. EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA PHONE: 1-450-346-8975 –––––––––––––––––––––––––––––––– WANTED (US)L GRADALL XL 4100 II EXCAVATORS - LOOKING FOR BOOM ASSEMBLY FOR A II SERIES GRADALL. EMAIL: MIKECROSS2005@AOL.COM PHONE: 703-759-2172 –––––––––––––––––––––––––––––––– WANTED (CA): CATERPILLAR 312 EXCAVATORS. EMAIL: SANTIAGOSFLC@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (OH): KUBOTA ATTACHMENTS - LOOKING FOR A LA854 FRONT LOADER FOR MY L5740 TRACTOR. EMAIL: CHASTUSTIN@GMAIL.COM; –––––––––––––––––––––––––––––––– WANTED (FL): ALL MODLES BOBCAT SKID STEER LOADERS; LOOKING FOR AN OLDER, BUT OPERATIONAL SKID STEER LOADER TO USE FOR YARD CLEAN UP. EMAIL: TYLER.SMITH@ CERTIFIEDBOOMREPAIR.COM; PHONE: 813-393-6253 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): MOXY MT30S3 OFF-HIGHWAY TRUCKS - LOOKING FOR REAR END DIFFERENTIAL FOR 30TON MOXY EMAIL: HARRY.SCHUMACK@GMAIL.COM; PHONE: 860-669-7115 –––––––––––––––––––––––––––––––– WANTED (US): INJECTION PUMP FOR A KOMATSU D375A-3 DOZER SERIAL NUMBER 17251 INJECTION PUMP 616275-2111 INJECTION PUMP 6162-75-2100. EMAIL: KOVACSBROTHERS1980@GMAIL.COM; PHONE: 863-425-5022 –––––––––––––––––––––––––––––––– WANTED (TX): CRANE BOOM - NEW, USED, SURPLUS, DAMAGED- FOR ALL CURRENT US CRANE BRANDS: AMERICAN/TEREX, KOBELCO, LINK BELT, MANITOWOC. EMAIL: SALES@CRANELIQUIDATORS.COM; PHONE: 281-583-BOOM (2669) ––––––––––––––––––––––––––––––––

WANTED (NC): ALL MODELS BROWN MOWERS; LOOKING TO BUY BROWN PRODUCTS LIMB TREMOR TREE SAW, PREFER 30 INCH MODEL, DEMO MODEL OR SLIGHTLY USED MACHINE. EMAIL: NORWOOD1310@GMAIL.COM; PHONE: 910-289-1310 –––––––––––––––––––––––––––––––– WANTED (MA): INGERSOLL RAND BL 570 BACKHOE LOADER. WOULD CONSIDER ANYWHERE IN NEW ENGLAND. EMAIL: LARRY@MARKONEINC.COM; PHONE: 978-441-0010 –––––––––––––––––––––––––––––––– WANTED (NORTHEAST): DROP DECK FLATBED TRAILER O/A LENGTH 30-36 FEET EMAIL: RIMROCK.TRUCKING@YAHOO.COM; PHONE: 917-478-3250 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): KOMATSU PC300-5K EXCAVATOR. EMAIL: EXPERSITUA@HOTMAIL.COM; PHONE: +351918747931 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR 972H WHEEL LOADER. EMAIL: SALES3GCESEQUIPMENT@GMAIL.COM PHONE: 657-274-8724 –––––––––––––––––––––––––––––––– WANTED (CA): KOMATSU D575A-3SD CRAWLER DOZER. EMAIL: TONYTHOMAS@ PACIFICCRANES.COM; PHONE: 1-818-956-5231 –––––––––––––––––––––––––––––––– WANTED (USA): ALL MODELS STEDMAN MISCELLANEOUS AGGREGATE LOOKING FOR 4 ROW CAGEMILL. EMAIL: FJS-1@ATT.NET –––––––––––––––––––––––––––––––– WANTED (FL): LANDOLL AXLE TRAILERS, ALL MODELS. EMAIL: MARK@CHAMPION SERVICESFL.COM PHONE: 407-947-1355 –––––––––––––––––––––––––––––––– WANTED (NY): RAWSON 40, 50 OR 60 FOOT STACKING CONVEYOR, 230 VOLT ELECTRIC. EMAIL: JIM@JRPINC.BIZ PHONE: 518-858-1103 –––––––––––––––––––––––––––––––– WANTED (NC): TEREX TA3 OFF-HIGHWAY TRUCK - NEED A COUPLING FOR 1998 TEREX TA30 ARTICULATED DUMP TRUCK (PART # A7341286). EMAIL: INFO@LOCKELANECONSTRUCTION.COM PHONE: 704-585-6625 –––––––––––––––––––––––––––––––– WANTED (FL): WIRTGEN W2000 COLD PLANERS / MILLING MACHINES - ONE OF OUR CUSTOMERS NEEDS A WIRTGEN W2000, OR SIMILAR, IN VERY GOOD WORKING CONDITION. IF YOU HAVE IT, PLEASE SEND US A QUOTATION AND INCLUDE FULL SPECIFICATIONS, HOURS, MAINTENANCE REPORTS AND ACTUAL PICTURES. EMAIL: JUANBOERI@ EQUIPMENT-AND-PARTS.COM PHONE: 954-681-9551 ––––––––––––––––––––––––––––––––

WANTED (US): CATERPILLAR 966F WHEEL LOADERS - I NEED TO BUY CAT 966F 2 ANY CONDITION ALL OVER USA AND CANADA. EMAIL: IKCEQIPMENTS@GMAIL.COM PHONE: 00923003695360 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR 777F OFF-HIGHWAY TRUCK. LOOKING FOR CAT777F - JUST MODEL F EMAIL: COMERCIAL@SOLUCOESRB.COM; PHONE: +5511942017728 –––––––––––––––––––––––––––––––– \WANTED (US): MANUFACTURER CATERPILLAR 966F II WHEEL LOADER. EMAIL: ILYAS.MTCPK@GMAIL.COM; PHONE: +92 332 248 9350 –––––––––––––––––––––––––––––––– WANTED (TX): KOMATSU FORKLIFTS, ALL MODELS. WANT TO BUY TRANSMISSION AND FLYWHEEL FOR KOMATSU FOR FG25C GAS 5000 FORKLIFT. EMAIL: DJ@AMERICANRENTALODESSA.COM; PHONE: 432-362-7603 –––––––––––––––––––––––––––––––– WANTED: CATERPILLAR, DEERE, KOMATSU, BOBCAT, CASE, VOLVO WHEEL LOADERS, ALL MODELS. EMAIL: PURCHASESOFFICIAL@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): JOHN DEERE 690B EXCAVATOR. READY TO BUY TODAY! LOOKING FOR ANY YEAR JD 690B WIDE OR NARROW. LET ME KNOW WHAT YOU GOT! EMAIL: INTERSTATEMEE@ SBCGLOBAL.NET; PHONE: 815-469-4988 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 980H WHEEL LOADER; LOOKING TO BUY CAT LOADER 972-970F-966-950-936. EMAIL: HUJIJIENTERPRISES@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): HITACHI ZX200E EXCAVATOR. URGENTLY LOOKING FOR USED HITACHI EXCAVATOR 200,300 AND 400 SIZES EXCAVATORS EMAIL: IKRAMKHAN@IUKANDCO.COM; PHONE: +923331234598 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR WHEEL LOADERS, ALL MODELS; LOOKING TO BUY USED CONSTRUCTION EQUIPMENT WITH WHOLESALE. EMAIL: EASTGROUPEQUIPMENT @OUTLOOK.COM –––––––––––––––––––––––––––––––– WANTED (NY): DETROIT DIESEL ENGINE – MODEL 353, USED OR REBUILT. EMAIL: PPIERCECON@AOL.COM; PHONE: 518-466-3027 –––––––––––––––––––––––––––––––– WANTED (TN): FORD 4610 TRACTOR, FRONT END LOADER. EMAIL: JUSTIJA.JJ@GMAIL.COM; PHONE: 941-661-1799 ––––––––––––––––––––––––––––––––

WANTED (WORLDWIDE): CATERPILLAR 966E WHEEL LOADER. WE ARE LOOKING TO BUY ANY USED CONSTRUCTION EQUIPMENT WITH WHOLESALE PRICE WITH ANY CONDITION. EMAIL: RTUBE902@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (TX): CORNELL 6NNT-RP PUMPS EMAIL: JTLABORDE@ LABORDEPRODUCTS.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR WHEEL LOADERS, ALL MODELS. LOOKING TO BUY ANY USED CONSTRUCTION EQUIPMENT WITH WHOLESALE PRICE WITH ANY CONDITION. EMAIL: AMERICAUSEDEQUIPMENT@ GMAIL.COM; PHONE: 657-236-7707 –––––––––––––––––––––––––––––––– WANTED (FL): FORD NEW HOLLAND BACKHOE LOADERS, ALL MODELS. LOOKING FOR GOOD RUNNING LOADER/BACKHOE, ANY MANUFACTURER/MODEL - TOTAL COST + DELIVERY $7,500 OR LESS. BE NICE IF HAS ATTACHMENTS (OR CAPABILITY FOR); TOP 3 (IN THIS ORDER) ARE: AUGER, BRUSH HOG, & BOX GRADER (GRAPPLE ON EITHER BUCKET WOULD BE USED). SMALL CHURCH IN S. FLORIDA IF YOU WANT WRITE-OFF; CHURCH TREASURER WILL SEND LETTER OF THANKS FOR DONATION OF A XXX (MAKE/MODEL/YEAR) LOADER BACKHOE WITH X ATTACHMENTS. (YOU FILE W/IRS: COMBINED TOTAL MARKET VALUE.) CAN WRITE 2ND LETTER OF THANKS FOR DELIVERY. HALIEUS@HOTMAIL.COM; PHONE: 954-445-9930. –––––––––––––––––––––––––––––––– WANTED: CATERPILLAR OFF-HIGHWAY TRUCK, MODEL 777F. EMAIL: NASCIMENTORENATOF@GMAIL.COM; PHONE: +5511942017728 –––––––––––––––––––––––––––––––– WANTED: CATERPILLAR MOTOR GRADERS, ALL MODELS, ANY CONDITION. EMAIL: HARTWORLDEQ@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (USA): JOHN DEERE BACKHOE LOADERS, ALL MODELS. LOOKING FOR GOOD RUNNING LOADER/BACKHOE, FARM OR CONSTRUCTION, ANY MANUFACTURER/MODEL: TOTAL COST & DELIVERY $7,500 OR LESS. UGLY IS OK; I'LL PAINT, FIX ROOF, ETC. BE NICE IF IT HAS ATTACHMENTS (OR CAPABILITY FOR); TOP 3 (IN THIS ORDER) ARE: AUGER, BRUSH HOG, & BOX GRADER (GRAPPLE ON EITHER BUCKET WOULD BE USED). SMALL CHURCH IN S FLORIDA WITH TAX-EXEMPT STATUS IF YOU NEED A WRITE-OFF; CHURCH TREASURER WILL SEND LETTER OF THANKS FOR DONATION OF A XXX (MAKE/MODEL/YEAR) LOADER BACKHOE WITH X ATTACHMENTS. HALIEUS@HOTMAIL.COM; PHONE: 954-445-9930. ––––––––––––––––––––––––––––––––

Page 70 • June 2, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Auctions are subject to change, please check Auctioneers websites for details ALEX LYON & SON AUCTIONEERS www.lyonauction.com 315-633-2944

AUCTIONS INTERNATIONAL www.auctionsinternational.com 800-536-1401

• Rochester, NY June 5, 2021 For: Retirement Auction, Finest Masonry Contractor in NE

• ONLINE May 31 – June 6, 2021

• Plainfield, CT June 9, 2021 For: Late Model Construction & Ag Equipment and more • Passaic, NY June 10, 2021 For: Retirement, Complete Liquidation, Mack Trucks, Trailers & more • Middletown, NY June 11, 2021 For: Very Major Job Completion of Amusement Park • Las Vegas, NV June 12, 2021 For: Late Model Rental Construction Equipment & more • Athens (Knoxville), TN June 12, 2021 For: Commercial Properties & Construction Equipment • Timed Online June 12 - 17, 2021 For: Retirement Construction & more Auction (Canada) RITCHIE BROS. AUCTIONEERS www.rbauction.com 402-421-3631

• ONLINE June 7 - 13 2021 • ONLINE June 14 - 20 2021 BAR NONE AUCTION www.barnoneauction.com 866-372-1700 • ONLINE Sat., June 12, 2021 For: Sacramento Equipment Auction • ONLINE Fri., June 25, 2021 For: Woodburn Equipment Auction BIDADOO AUCTIONS www.bidadoo.com 1-877-BIDADOO • ONLINE June 8, 2021 • ONLINE June 15, 2021 • ONLINE June 22, 2021 • ONLINE June 29, 2021

All our auctions are now online bidding only!

BIG IRON AUCTIONS www.bigiron.com 800-937-3558

• Williston, ND June 2, 2021

• ONLINE June 2, 2021

• Phoenix, AZ June 4, 2021

• ONLINE June 9, 2021

• Saskatoon, SK June 8-9, 2021

• ONLINE June 16, 2021

• Sacramento, CA June 9, 2021

• ONLINE June 23, 2021

• Grande Prairie, AB, CAN June 9-11, 2021

• ONLINE June 30, 2021

• Las Vegas, NV June 11, 2021 • Houston, TX June 15-16, 2021 • Great Plains Regional Event June 17, 2021 • Northeast Regional Event June 22-23, 2021 • Edmonton, AB, CAN June 23-25, 2021 • Great Lakes Regional Event June 24-25, 2021 • Los Angeles, CA June 25, 2021 • Truro, NS June 28, 2021 • Southeast Regional Event June 29, 2021 • Chehalis, WA June 29, 2021 • Toronto, ON July 13-15, 2021 • Wasilla, AK July 17, 2021

BLACK STAR ACA www.blackstaraca.com 800-610-2192 • ONLINE June 9, 2021 • ONLINE June 23, 2021 DEANCO AUCTIONEERS www.deancoauction.com 601-656-9768 • Philadelphia, MS July 21 - 22, 2021 For: Huge 2-Day Equipment, Truck & Trailer Auction • Philadelphia, MS Sept. 15 - 16, 2021 For: Huge 2-Day Equipment, Truck & Trailer Auction • Philadelphia, MS Nov. 17 - 18, 2021 For: Huge 2-Day Equipment, Truck & Trailer Auction

Coming Auctions To view information on upcoming auctions visit our Auction Calendar at www.constructionequipmentguide.com DON SMOCK AUCTION CO., INC. www.dsa-auctions.com 765-778-9277 • Pendleton, IN Fri., June 18, 2021 29th Annual Summer Auction • Pendleton, IN Fri., September 17, 2021 29th Annual Fall Auction

FREY & SONS, INC. www.freyandsons.com 419-455-3739 • Archbold, OH Fri., June 11, 2021 For: NW Ohio Contractor’s Auction

GOVPLANET an IronPlanet Solution www.govplanet.com 844-225-8799 • ONLINE June 15 – July 6, 2021 For: PennDot Annual Heavy Equipment Auction

HANSEN AUCTION GROUP www.hansenauctiongroup.com 763-389-5700 • ONLINE Mon., June 14, 2021 For: Pike Construction Equipment, Truck & Trailer Auction

HESS AUCTIONEERS www.hessauctioneers.net 866-511-2493 • Marietta, PA Fri., June 11, 2021 For: Truck, Trailer & Equipment Auction • Marietta, PA Fri., August 13, 2021 For: Truck, Trailer & Equipment Auction

HUNYADY AUCTION COMPANY www.hunyady.com 215-361-9099

I.R.A.Y. AUCTION www.iraymn.com 320-968-7230 • ONLINE Wed., June 23, 2021 For: Heavy Equipment, Truck & Trailer Auction

IRON AUCTION GROUP www.ironauctiongroup.com 864-546-1216 • Princeton, WV Wed., June 9, 2021 For: Unreserved Bankruptcy & Consignment Auction • Acworth, GA Wed., June 30, 2021 For: Retirement Auction for Total Development, Inc.

J.J. KANE AUCTIONEERS www.jjkane.com 855-GO2-KANE • Timed Auction Ends June 8, 2021 • Timed Auction Ends June 15, 2021

J.M. WOOD AUCTION COMPANY www.jmwood.com 800-447-7085 • Montgomery, AL June 15 - 18, 2021 For: 48th Annual Summer Auction

J. STOUT AUCTIONS www.jstoutauction.com 888-897-8864 • ONLINE Thurs., June 24, 2021 For: Heavy Equipment, Commercial Trucks, Trailers & More

JAMES G. MURPHY INC. AUCTIONEERS www.murphyauction.com 425-486-1246

• Boonsboro, MD Thurs., June 3, 2021 For: Virtual/Live Broadcast for David M. Merchant, Inc.

• ONLINE June 3 - 10, 2021 For: Heavy Equipment, Contractors Equipment, Trucks & Vehicles

• Butler, PA Wed., July 14, 2021 For: Virtual/Live Broadcast John D. Clark Trucking, Inc. Complete Liquidation

• ONLINE August 5 – 12, 2021 For: Heavy Equipment, Contractors Equipment, Trucks & Vehicles

• ONLINE September 30 – October 7, 2021 For: Heavy Equipment, Contractors Equipment, Trucks & Vehicles • ONLINE December 2 - 9, 2021 For: Heavy Equipment, Contractors Equipment, Trucks & Vehicles JEFF MARTIN AUCTIONEERS, INC. www.jeffmartinauctioneers.com 601-450-6200

• ONLINE Thurs., June 3, 2021 For: Construction Equipment • ONLINE Tues., June 8, 2021 For: Government Auction • ONLINE Tues., June 8, 2021 For: City of Wichita Auction • ONLINE Wed., June 9, 2021 For: Ag Equipment • ONLINE Thurs., June 10, 2021 For: Truck & Trailer Auction

• Newton, NH June 5, 2021 For: Northeast US Live & Online Public Auction

• ONLINE Thurs., June 10, 2021 For: RK&R Dozer Surplus Equipment Auction

• Gillsville, GA June 8, 2021 For: Contractor Inventory Reduction Public AuctionSimpson & Simpson, LLC, and Others, Live & Online

• ONLINE Wed., June 16, 2021 For: Vehicles & Equipment Auction

• Kissimmee, FL June 12, 2021 For: Late Spring Construction & Transportation Public Auction • Morganton, NC June 22, 2021 For: Public Inventory Reduction Auction • Pelzer, SC June 24, 2021 For: East Coast Spring Construction & Transportation Public Auction • Stanton, TX July 14, 2021 For: Featuring Oilfield, Construction Equipment & much more • Online Only July 29, 2021 For: Wenco Energy Equipment & Materials Online Liquidation JOEY MARTIN AUCTIONEERS www.joeymartinauctioneers.com 864-940-4800 • Decatur, TX Thurs., June 24, 2021 For: Fleet Reduction & Rental Return Public Auction • Atlanta, GA Wed., July 28, 2021 For: Jackson Paving Co. LEAMAN AUCTIONS, LLC. leamanauctions.com 717-464-1128 • Shamong, NJ Fri., June 18, 2021 For: Public Auction for Giberson Plumbing & Excavating PURPLE WAVE AUCTION www.purplewave.com 866-608-9283 • ONLINE Wed., June 2, 2021 For: Vehicles & Equipment Auction

• ONLINE Thurs., June 17, 2021 For: Construction Equipment • ONLINE Tues., June 22, 2021 For: Government Auction STEFFES GROUP INC. www.steffesgroup.com 701-237-9173 • Timed Online June 4 - 9, 2021 For: Upper Midwest Location • Timed Online June 8 - 15, 2021 For: Steffes Truck & Transportation Auction • Timed Online June 8 - 16, 2021 For: Litchfield Farm Equipment Auction • Timed Online June 18 - 23, 2021 For: Steffes Construction Consignment Auction, Upper Midwest Location • Timed Online June 23 - 30, 2021 For: Bud’s Welding & Machine Shop Estate Auction (ND) • Timed Online June 23 - 30, 2021 For: Steffes Construction Consignment Auction, Upper Midwest Location WSM AUCTIONEERS www.wsmauctioneers.com 623-936-3300 • ONLINE ONLY Sat., June 12, 2021 For: Public Auction YODER & FREY HEAVY EQUIPMENT AUCTIONS www.yoderandfrey.com 419-865-3990 • Findlay, OH June 3, 2021 For: Heavy Equipment Auction

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 2, 2021 • Page 71

Meekins Holds Retirement Auction for Currin Brothers

fter 49 years in business, Currin Brothers has decided to retire, and hired Meekins Auction Company, in conjunction with Sound Heavy Machinery Inc., to sell the equipment at absolute public auction. Since April 1, 1972, Currin Brothers Inc. has been providing the Raleigh, Durham, Triangle area with excavating, site prep, utilities and building construction services for the commercial and residential markets. From earth moving equipment, heavy duty trucks, trailers, or to support equipment, this auction featured some quality equipment and trucks up for sale.  CEG

Kyle (L) and Hogue Cavenaugh, both of Cavenaugh Grading in Durham, N.C., were looking over the various attachments and transmissions. Justin (L) and Smitty West, both of Marion West & Son in Raleigh, N.C., came to do some shopping.

(L-R): Rick Cox, Mickey Meekins and Adrian Meeks keep the auction moving. The dozers ranged from a Cat D4H to a D9G.

Dantzlere and Glenn Currin are looking forward to spending more time in the mountains in their retirement. The auction included Cat and John Deere excavators. The well-attended auction attracted bidders from throughout the southeast and nine foreign countries via the Internet.

McCrea Wallace (L) and Senter Currin, both of Gregory Poole Equipment Company, follow the sale.

Chris (L) and Justin Rivenbark of Rivenbark Excavating in Wallace, N.C., tested out this John Deere 310G backhoe and thought it would work for their needs.

Anthony Broome (L) and Jay Sellers, both of Ironpeddlers in Raleigh, N.C., hoped to find some good deals.

Page 72 • June 2, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Yoder & Frey Heads to Kissimmee, Fla., for May Auction

oder & Frey was back at its Kissimmee, Fla., auction site on May 19. A great turnout of “regular” Yoder & Frey attendees and Southeast contractors and dealers came out on a beautiful central Florida day to bid on a terrific line up of machines, support equipment and miscellaneous lots.  CEG

Yoder & Frey’s Josh Schott calls the auction and keeps it rolling at a rapid pace. Interested in a nice long-reach Doosan DX 225LC are Jordan Heidrick (in cab) and Charlie Heidrick, both of Heidrick Earthmoving Inc., Danville, Ill.

Inspecting one of several Yanmar mini-excavators in the sale is Ed Joyce, I Equip, Trucking & Warehousing, Philadelphia, Pa. Upper Midwesterners in town for some “Yoder bargains” on machines, including a nice selection of material handlers, are Josiah (L) and Ryan Bruggink of Bruggink’s Inc., Sheboygan, Wis. A crowd waits patiently as the auction truck rounds the corner to get started on auctioning of the paving products in the sale lineup.

An auction goer gives a “once over” on a unique piece in the sale lineup — a John Deere 764 Quad Track dozer. If you were looking for both full-sized or miniexcavators, this sale was the place to be.

Inspecting a Case 650L dozer of interest is Dan McHugh of Brookside Equipment Sales, Phillipston, Mass.

A pair of white Cat 908M loaders caught the attention of Carl Weese (L), C&F Enterprises, Bradenton, Fla., and Chris Mullinex, Gilliam Construction, Palmetto, Fla.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 2, 2021 • Page 73

2 Up pcomiing Auctions in June 2021

669 Marina Drive, B-2 Charleston, SC 29492 (864) 546-1216

WV AL# 2399 GA AL# AU-C003126

AUCTION 1: Unreserved Bankruptcy y and Co onsignment Auctio on

AUCTIO ON 2:

Retirement Auction for or Total Development, In nc.

Jun ne 9, 9 2021 | 9 AM EST

June 30, 30 2021 | 10 AM EST 3

974 Greasy Ridge R Road | Princeton, WV 24739

4185 Cantrell Road NW | Acworth h, GA 30101

To consign your items, con ntact: Matt McGaffee | (276) 451-8921 matt@ironauctiongroup.ccom m Jared d McGaffee | (276) 202 2-6800 jared@ d@ironauctiongroup.com

Live and Online Bidding g

Text “iro on” to 888-401-2999 to subscrribe to our text alerts.

These e auctions will feature construction onstruction equipment,, trucks, trailers, support equipment, pment, and much more!!

Terry McGa Gaffee | (276) 608 8-3787 terry@irona i auctiongroup. i com Sam Ingram | (7 (770) 312-1 1432 sam@ironauctio sam@ironauction i iongroup.c ongroup ccom

For more e information and item descriptions, visit IronA AuctionGroup.com. p PLEASE NO OTE: Masks and social distancing stancing required for onsitte guests.

JM Wood, ALDOT Hold 25th Annual Fleet Sale

orking together for successful fleet management for a quarter of a century, JM Wood Auction and the Alabama Department of Transportation celebrated their 25th Annual Auction at the ALDOT fleet facility in Montgomery, Ala., in early May. This one-owner, very well-maintained fleet is always a highlight for bidders from across the country. This sale saw $9 million in sales to buyers from 19 states. “ALDOT does a tremendous job getting this machinery ready for auction,” said Russ Wood. “Their fleet management program is second to none in the U.S.” Next up for JM Wood Auction is a big regional auction event being held in Montgomery, Ala., and Anderson, Texas, on June 15 to 18.  CEG

ALDOT works with a variety of dealers, representing many manufacturers, to provide a well-rounded fleet of quality machines.

Derek Johnson, JM Wood ring man, catches one last bid before the gavel drops on another piece of equipment.

Next generation JM Wood staffer Ruston Wood Jr., age 9, was impressed with the auction success.

JM Wood ALDOT sales always provide a terrific selection of late model Cat motor graders.

Page 74 • June 2, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ADVERTISER INDEX To read articles about these CEG advertisers, visit www.constructionequipmentguide.com ALTA EQUIPMENT COMPANY (TAMPA)..........................................5

KPI-JCI ............................................................................................45

AMULET ....................................................................................34,36

KUBOTA EXCAVATOR ..............................................................56,57

ASCENDUM MACHINERY INC ........................................................2

LABOUNTY MANUFACTURING INC..............................................37

BANDIT INDUSTRIES INC ........................................................46,47

LAND EQUIPMENT INC ................................................................24

BARGAINS ......................................................................................66

LINK-BELT EXCAVATORS ........................................................38,39

BOMAG AMERICAS INC ................................................................27

M.T. KAYE STEEL LLC....................................................................23

BRIGGS JCB ..................................................................................23

MAGELLAN CONSTRUCTION ......................................................68

BROOKS SALES INC ....................................................................24

MANITOWOC CRANE GROUP ......................................................58

CAROLINA CAT..........................................................................14,25

MAY - RHI........................................................................................20

CEG SCALE MODELS....................................................................62

METSO OUTOTEC ........................................................................42

COMPANY WRENCH......................................................................21

MOBRO MARINE INC................................................................35,66

CONSTRUCTION EQUIPMENT GUIDE ..........................28,32,40,69

NORAM ......................................................................................64,65

DOOSAN ....................................................................................60,61

PARMAN TRACTOR & EQUIPMENT ............................................27

DOOSAN PORTABLE POWER ......................................................67

POWER EQUIPMENT CO ..............................................................13

EQUIPMENT CORP OF AMERICA ................................................31

POWERSCREEN MID-ATLANTIC ..................................................49

FAE USA INC ..................................................................................42

SAND SCIENCE..............................................................................46

FELLING TRAILERS ......................................................................51

SANY AMERICA INC ......................................................................54

FLANGE LOCK................................................................................31

SELECT CRANE SALES ................................................................20

FLINT EQUIPMENT COMPANY ......................................................6

SENNEBOGEN ..............................................................................48

GEHL ..............................................................................................66

SOUND HEAVY MACHINERY ........................................................10

GSE GREAT SOUTH EQUIPMENT COMPANY ..............................9

SUMMIT SUPPLY LLC ....................................................................23

HAMMER TRUCK SALES ..............................................................15

TEREX FUCHS ..............................................................................63

HEAVY MACHINES INC....................................................................3

TEREX TRUCKS/VOLVO................................................................29

HILLS MACHINERY COMPANY LLC..............................................76

THOMPSON MACHINERY USED PARTS......................................34

HITACHI CONSTRUCTION MACHINERY ....................................59

TOWMASTER INC. ........................................................................52

HYUNDAI CONSTRUCTION EQUIPMENT ..............................18,19

TREKKER GROUP..........................................................................11

IRON AUCTION GROUP ................................................................73 JAMES RIVER EQUIPMENT ............................................................7

ALABAMA SUPPLEMENT

JJ SCHECKEL CORP ....................................................................17

COWIN EQUIPMENT CO INC ..........................................................3

JOHN DEERE..................................................................................75

GORILLA HAMMERS ........................................................................1

KLEEMANN ....................................................................................43

STONE EQUIPMENT CO INC ..........................................................7

KOBELCO CONSTRUCTION MACHINERY ..................................55

THOMPSON TRACTOR CO ..........................................................4,5

KOMATSU AMERICA CORP ..........................................................53

TRACTOR & EQUIPMENT CO INC..................................................8

The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 2, 2021 • Page 75

WORK SMART FROM THE GROUND UP

Looking to maximize your day-to-day operations? New pressure-compensated loadsensing (PCLS) hydraulics on the new John Deere 310SL Backhoe Loader smoothly increase your cycle times with 16% greater rear backhoe trenching productivity* and 10% more craning capacity.** Along with John Deere Connected Support™, you can elevate your underground operation above expectations and Run Your World. JohnDeere.com/backhoes

*Based on rear backhoe trenching productivity study, compared to previous model. / **With Lift Mode enabled, compared to previous model.

Beard Equipment Company

Dobbs Equipment

Mobile, AL 251/456-1993 Pensacola, FL 850/476-0277 Freeport, FL 850/835-3337 Panama City, FL 850/769-4844 Tallahassee, FL 850/575-5600 Perry, FL 850/584-9200 Jacksonville, FL 904/296-5000 Lake City, FL 386/752-9544 Palatka, FL 386/325-6268 Ocala, FL 352/732-4646

Riverview, FL (Main Office) 813/620-1000 Fort Myers, FL 239/334-3627 Lutz, FL 813/995-0841 Miami, FL 305/592-5740 Orlando, FL 407/299-1212 Pompano Beach Parts, FL 954/977-9541 Riverview Parts, FL 813/621-4902 Sarasota Parts, FL 941/960-2004 West Palm Beach, FL 561/848-6618

www.beardequipment.com

www.dobbsequipment.com

FLINT

www.flintequipco.com Dothan, AL 334/794-8691 Troy, AL 334/566-4181 Adairsville, GA 770/773-9857 Albany, GA 229/888-1212 Atlanta, GA 404/691-9445 Braselton, GA 770/965-1889 Brunswick, GA 912/264-6161 Columbus, GA 706/687-3344 Grovetown, GA 706/855-5440

Macon, GA 478/788-1586 Savannah, GA 912/964-7370 Valdosta, GA 229/474-6680 Andrews, SC 843/221-4940 Aynor, SC 843/358-5688 Ladson, SC 843/572-0400 Simpsonville, SC 864/963-5835 Walterboro, SC 843/539-1420 West Columbia, SC 803/794-9340

Page 76 • June 2, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

EFFICIENT & VERSATILE The CASE CX57C is a “large” mini excavator with best-in-class horsepower, capable of handling the demands of heavier excavation operations. Its design stands apart from the rest of the C Series line because it features a conventional tailswing design with a large counterweight, giving it power and performance comparable to a larger class – all while still taking up a relatively small footprint.

Designed for Durability and Performance. Check Out the CASE CX57C at Hills Machinery! www.hillsmachinery.com

QUALITY USED EQUIPMENT FROM HILLS MACHINERY

O FP 2012 Case SV212 84” smooth drum roller,

2020 LB4641, 4WD, CAB EROPS,CASE 2373 590SN, hours. RO7248 ..............$64,000 AND A/C, 219 HOURS ................$115,000

O P F 2015 Case CX210C 2 way auxiliary hydraulics,

2019 CASE 850M WIDE TRACK, DO4986, hydraulic thumb. Fresh service, including new CAB AND A/C, 1981 HOURS ......$109,000 pins and bushings. EX2865 .................$105,000

2016 Terex Finlay 883+ 9.16 CY hopper,

2012 CASE TR320, CT0490, OPEN CAB, 48” conveyor, 32” middle grade conveyor, 5322 HOURS................................$25,000 32” fines conveyor. CS6573 ................$217,700

2016 Edge TRM622 Trommel 48” feeder belt,

2019 CASE CX57C, CAB42” & radial A/C, 60” collection belt, 42”MX4891, oversize belt, 24” THUMB, HOURS........ finesBUCKET belt, 7/8 W/ function radio 168 remote control. ....................................................$61,000 CS0276 ..............................................$202,880

North Carolina

South Carolina

Asheville Charlotte Greensboro Greenville Raleigh 828-820-5265 704-208-5564 336-308-3045 252-752-7145 919-746-7938

Columbia Charleston Greenville 803-658-0200 843-225-9377 864-546-5208

©2021 Hills Machinery Co. All rights reserved. CASE is a trademark registered in the United States and many other countries, owned by or licensed to CNH Industrial N.V., its subsidiaries or affiliates.