Published Nationally ®
Southeast Edition
May 22 2019
$3.00
Vol. XXXII • No. 11
“The Nation’s Best Read Construction Newspaper… Founded 1957.”
Inside
470 Maryland Drive • Ft. Washington, PA 19034 • 215-885-2900 • Toll Free 800-523-2200 • www.constructionequipmentguide.com
Work Proceeds on Miami-Dade’s Krome Ave. Florida DOT photo
Blanchard Showcases Next Gen Cat Lines…24
NCDOT Honored for Work During Hurricane…26
Drainage is installed along Krome Avenue in western Miami-Dade County, Fla.
By Irwin Rapoport
Phase 8 of the Krome Avenue reconstruction and widening program, a Florida Department of Transportation (FDOT) initiative, began in midJanuary and is expected to be completed in April 2020, when crews from Halley Engineering Contractors Inc. (HEC) deliver the $37.8 million contract that has them working in western Miami-Dade County. The work area, 6.2-mi in extent, covers State Road 997/Krome Avenue from Southwest 236th Street to Southwest 136th Street, which will see Krome Avenue widened from two to four lanes divided by a 40-ft. grassed median; construction of two new bridges over the C-102 Canal, in addition to a multiuse trail for walking and biking; installation of a drainage CEG CORRESPONDENT
Alabama’s ‘One Man Show’ Prefers SANY...32
Table of Contents ..............4 Truck & Trailer Section ........ ....................................41-44 Recycling Section ......49-60 Attachments Section ............ .................................... 61-64 Business Calendar ............79 Auction Section ..........84-81 Advertisers Index ............90
system, new lighting, and guardrail in the median; upgrading of traffic signals at Southwest 232nd Street, Southwest 216th Street, Southwest 200th Street, Southwest 192nd Street and Southwest 184th Street; and adequate access management and improved traffic operations throughout the corridor. “This is a continuation of the 36-mile corridor improvements,” said Heather M. Leslie, FDOT’s community outreach specialist for the project. “These projects have been in the works since 1999 and will continue to address safety, flooding, water quality, economic competitiveness and preservation of the existing roadway. Widening the roadway was critical see KROME page 45
Officials Break Ground on $95M Oak Ridge Lab Energy Secretary Rick Perry, U.S. Rep. Chuck Fleischmann and lab officials broke ground May 7 on a multipurpose research facility that will provide laboratory space for expanding scientific activities at the Department of Energy’s Oak Ridge National Laboratory in Tennessee. The new Translational Research Capability,
or TRC, will be purpose-built for research in computing and materials science and will serve to advance the science and engineering of quantum information. “Through today’s groundbreaking, we’re writing a new chapter in research at the Translational Research Capability Facility,” Perry said. “This building will be the home for
advances in quantum information science, battery and energy storage, materials science, and more. It will also be a place for our scientists, researchers, engineers, and innovators to take on big challenges and deliver transformative solutions.” With an estimated total project cost of $95 see LAB page 66
Page 2 • May 22, 2019 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
NORTH CAROLINA Asheville 828.687.0620 Charlotte 704.596.8283 Greenville 252.754.5280 Raleigh 919 661 8710 919.661.8710
SOUTH CAROLINA Piedmont 864.704.1060 Columbia 803.791.0740 Charleston 843.414.1120
TENNESSEE Knoxville 865.525.1845 Chattanooga 423.308.7940
GEORGIA Buford 678.318.9500 Savannah 912.964.8079 Macon (Now Open) 478.200.3300
NORTH DAKOTA TA Williston 701.577.1249 Bismarck 701.250.4882 Fargo 701.271.2360
When flexibility and versatility are key, look no further than your W y local Volvo dealer, Ascendum Machinery. En ngineered for success, Volvo excavators deliver state-of-the-art performance while maintaining Volvo’s high sttandard of comfort and safety. Find the right Volv Volvo equip pment for your projects with Ascendum.
ascendummach hinery.com
173-2301 173 2301_ASC ASC_6 60th 0th_F Ful ullSpread Spread d_10.125x21.625 10.125xx21.625_S SE E_FINAL.indd NAL.indd 1
4//30//19 9:37 4 4/30/19 9:37 AM AM
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 22, 2019 • Page 3
PERFORMANCE PRODUCTIVITY POWER Have it all with Volvo
ility are key, look no vo dealer, Ascendum success, Volvo -the-art performance high standard of comght Volvo equipment endum.
173-2301_ASC_60th_FullSpread_10.125x21.625_SE_FINAL.indd 2
4/30/19 9:37 AM
Page 4 • May 22, 2019 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
®
FEATURES
8
IN THIS ISSUE
18
The hard hat comes from a Kentucky-based, family-owned company called Bullard, which was founded in 1898 in San Francisco by Edward Dickinson Bullard. Originally, Bullard supplied carbide lamps and other mining equipment.
CAT LAUNCHES COMPETITION TO FIND THE WORLD’S BEST OPERATORS
28
MORE THAN 600 ATTEND PUCKETT RENTS MISS. OPEN HOUSE
Caterpillar has announced the launch of the 2019/2020 Global Operator Challenge Competition. Operators will test their skills against those of fellow operators around the world to determine who can claim the title of “best.”
The rain poured down in the Jackson, Miss., area as the crowd poured in May 9 for Puckett Rents’ open house in Richland, a suburb of Jackson.
Pennsylvania Congressman Mike Kelly (PA-6) called on Congress to take steps to authorize composite plans, repeal the Cadillac tax, and pass a long-term infrastructure bill during a visit to a local construction project on May 3.
In St. Clair County, Ala. there’s a hot bed of construction work. In the middle of this construction boom is the self-proclaimed “one man show” of Rick Crocker of Circle C Services.
Every day is different in the crane and rigging business.Daniel Lizotte, the operations and sales manager of W&W Crane & Rigging, would not have it any other way.
On Saturday, May 4, Brooks Sales in Monroe, N.C., hosted an open house and Kubota field day event.
Last year, more than 4,000 Indy race fans signed in to win a pair of tickets to see the 2019 NTT INDYCAR Series ABC 500 at the famous Pocono Raceway as guests of Hitachi Construction Machinery Loaders Americas Inc. (HCMA). For 2019, Hitachi is offering them another chance.
AGC officials said the continuing demand for most construction underscores the need for federal enactment of immigration reforms to boost the supply of workers.
On April 26 and May 7, Blanchard Machinery Company hosted two exclusive showcases of the latest in product innovation from Caterpillar that were each attended by more than 100 contractors working jobs throughout South Carolina.
Both days had phenomenal crowds and strong bidding on the Internet with day one featuring aerials, construction equipment, road building machines, heavy duty trucks and trailers, and other miscellaneous support pieces.
12
PA. CONGRESSMAN MIKE KELLY CALLS FOR CADILLAC TAX REPEAL
18
W&W CRANE & RIGGING STILL GROWING AFTER 20 YEARS
20
HITACHI WHEEL LOADERS’ ROAD 2 POCONO SWEEPSTAKES BEGINS
24
BLANCHARD MACHINERY DEMOS NEXT GEN CAT EQUIPMENT AT S.C. EVENTS
26
NCDOT RECEIVES AWARD FOR DRONE USE DURING FLORENCE
The award comes with a $5,000 prize, which the NCDOT’s Division of Aviation has elected to present to the North Carolina Disaster Relief Fund. Founder, Publisher & CEO Southeast Publisher Executive Publisher Editor In Chief Associate Editor Editorial Assistant Editorial Consultant Production Mgr. Controller Circulation Mgr. Web Editor
Edwin M. McKeon Sr. Richard C. McKeon Teddy McKeon Craig Mongeau Joe Trinacria Katherine Devlin Pete Sigmund John Pinkerton Judith Nixon Cathy Printz Emily Buenzle
www.constructionequipmentguide.com
32
34 36
89
MACHINE PURCHASE PROVES KEY TO LOW COST OF OWNERSHIP BROOKS SALES SHOWS OFF KUBOTA PRODUCT LINES IN N.C.
CONSTRUCTION EMPLOYMENT RISES IN 218 METRO AREAS JEFF MARTIN AUCTIONEERS HOSTS TWO-DAY SALE IN BROOKLYN, MISS.
RECYCLING SECTION
49
LIEBHERR FEATURES MATERIAL HANDLING MACHINES AT ISRI 2019
52 56 58 58 60
PETERSON PACIFIC INTRODUCES SMALLER, YET POWERFUL 1700D
METSO EXPANDS M&J PRE-SHREDDER LINE FOR WASTE RECYCLING BANDIT OFFERS EXTENDING KESLA LOADERS WITH REMOTE CONTROL
TELSMITH’S PORTABLE CRUSHER DELIVERS A CRUSHING ADVANTAGE
DEPARTMENTS
74 84 89
BUSINESS CALENDAR COMING AUCTIONS CLASSIFIEDS
61 62 64
VOLVO New Generation Tooth System PEMBERTON Manual Tine Adjustment Feature VACUWORX SL 2 Vacuum Lifting System
EQUIPMENT
Kent Hogeboom
Rich Olivier
• North & South Carolina • Tennessee • Virginia
National Sales Manager
• Alabama • Arkansas • Georgia • Mississippi • Tennessee • Florida
YouTube
704/553-8888 800/288-4234 215/885-2910 rmckeon@cegltd.com
315/866-1423 Toll Free 800/988-1203 Fax 315/866-1379 e-mail khogeboom@cegltd.com
Construction Equipment Guide Southeast Edition (ISSN 1058-6474) is published biweekly by Construction Equipment Guide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates. Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes to Construction Equipment Guide Southeast Edition, 470 Maryland Dr, Ft. Washington, PA 19034. Contents Copyrighted ©2019, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial
32
LAKE ERIE PORTABLE SCREENERS INTRODUCES PITBULL PB678
Richard C. McKeon
Toll Free Fax e-mail
Advertising e-mail production@cegltd.com
Mobile
24
For advertising rates Contact
Main office 470 Maryland Drive Fort Washington, PA 19034 215/885-2900 Toll Free 800/523-2200 Fax 215/885-2910 Web site
Circulated Throughout • Alabama • Arkansas • Florida • Georgia • Louisiana • Mississippi • North Carolina • South Carolina • Tennessee • Virginia • Puerto Rico • Virgin Islands
To read these stories and many more, visit www.constructionequipmentguide.com
‘HARD BOILED HATS’ TO JOBSITE STAPLE — HARD HATS TURN 100
12
SOUTHEAST EDITION
Toll Free Fax e-mail
770/443-3174 800/409-1479 770/443-3176 rolivier@cegltd.com
material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication. Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 22, 2019 • Page 5
Get More Done S A L E S • S E R V I C E • PA R T S • R E N TA L S
www.MayEquip.com www.earthmoversfl.com
www.RobsHydraulics.com www.fourseasons-equip.com
NEW HYUNDAI HX330L 0% Financing Available
National Equipment Dealers Has It Covered www.fourseasons-equip.com HOUSTON, TX DALLAS,TX 800-234-5007 866-270-1700 281-807-9777 214-388-1700
www.MayEquip.com • www.RobsHydraulics.com CHARLOTTE, NC RALEIGH, NC GRIMESLAND, NC COLUMBIA, SC 866-629-3784 866-629-3784 252-752-1500 866-629-3784 LEXINGTON, NC BENSON, NC CHARLESTON, SC GREENVILLE, SC 866-629-3784 919-243-0631 866-629-3784 866-629-3784
www.earthmoversfl.com APOPKA, FL FT. PIERCE, FL 407-401-8532 407-401-8532
Page 6 • May 22, 2019 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
THE BULL B HOG FO ORESTRY MULCHER fecon.com
The #1 Mulchher in the US SA! DURABILIT TY -- PERFORMANCE -- VERSA V ATILITY TILITY
855.910.64955
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 22, 2019 • Page 7
Prroud To partneer with These LLines: *
*Wirttgen Group products only availablle in Virginia markets. | Not all line es available at all locations. Please e see your nearest James River location cation for full details.
Page 8 • May 22, 2019 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
‘Hard Boiled Hats’ to Jobsite Staple — Hard Hats Turn 100
Women got the vote. Prohibition began. The National Football League was founded. And, the construction industry was forever changed by the invention of an often overlooked but significant worker safety advancement — the hard hat. And, while perhaps not considered a great technological invention now, at the time the invention of the hard hat revolutionized and galvanized the businesses and the people behind American industrial boom. The hard hat comes from a Kentucky-based, family-owned company called Bullard, which was founded in 1898 in San Francisco by Edward Dickinson Bullard. The company originally supplied carbide lamps and other mining equipment to gold and copper miners in California, Nevada and Arizona. When Edward Dickinson Bullard’s son, E.W.
Edward Dickinson Bullard
Bullard returned from World War I, he combined his understanding of customer needs and his experience with his doughboy army helmet to design a protective headgear for miners. Today, the hard hat is the most recognizable safety product worn
by workers on industrial job sites around the world. “We are so proud to help workers go home safely at the end of the day, and we celebrate a century of manufacturing innovation in the industrial health and safety and emergency responder markets,” CEO Wells Bullard said. “We can all be proud of the role Bullard has played in revolutionizing the safety industry. We are poised to lead our safety markets with even greater advances as we continuously strive to solve the tough problems workers face,” she continued. “As we embark on a year-long celebration highlighting our innovations that have improved the quality of life for workers around the world, I want to say thank you for helping make Bullard an awesome company.”
Hard boiled cap
The “Hard Boiled” Hat was introduced in 1919 and represented the first of many innovative designs over the past century that has led Bullard to its prominent position in head protection for industrial and emergency response applications. “The original ‘Hard Boiled hat’ was manufactured out of steamed canvas, glue, a leather brim and black paint. My great-grandfather built a suspension device into what became the worlds’ first, commer-
cially available, industrial head-protection device,” Wells Bullard explained. “We may take it for granted today, but we are proud to be celebrating 100 years of an innovation that truly helped our country grow and keep the hardworking women and men who built it safer.” During the 1930s, while the Golden Gate Bridge was being constructed in San Francisco, Bridge engineer Joseph B. Strauss contacted Bullard to request that the company adapt its hats to protect bridge workers — it also was the first area ever designated as a “hard hat area.” Bullard not only supplied hard hats for this famous project, but its engineers also see BULLARD page 70
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 22, 2019 • Page 9
Kaise er Exca avatorss Go Anywhe A ere New and use ed models in stockk, ready to work Kaiser excavatorss are like no other machin ne. With their hydraulicallyy powered legs, they movve like spiders, climbbing steep slopes, walking g out into water, moving with agility to work anyw where.
Call the locattion nearest you fo or a demo today!
When you need eed us, where you need us
www.g gsequipment.net
Equipment • Parts ts • Service
Tampa a 866-586-8956
Orlando 407-859-9160
Talla a hassee 850-5774-0892
Fort Myers 239-334-60663
Ocala 866-586-8956
Jacksonville 904-268-4400
Pompano Beach 9 954-327-8808
Page 10 • May 22, 2019 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
M450s SkidSteer Mulcher
Individual configuration for all working conditions e.g. optional flap
www.prinoth.com BCS Bite-Control-System BCS-Rotor with steel knives or carbide teeth. Best balanced rotor for less wear on bearings and high speed meaning high productivity and perfect finishing.
Special $34,500
2018 Takeuchi TL10V2 , 3 Hrs, s/n 1314, OROPS w/72” Brush Cutter ..........$52,000
USED EQUIPMENT
2018 Takeuchi TL8R, 98 Hrs, s/n 5967, OROPS, Complete w/GP Bkt..........$39,750
2018 Sany 500H Excavator, s/n J00558, 1764 Hrs, Complete w/72” 4 Yard Bucket, Removable Hydraulic Counter Weight ....................................................$259,500
2017 Takeuchi TL10V2, 33 Hrs, s/n 1276, OROPS, Complete w/GP Bkt ..........$48,500
2018 Takeuchi TL12R2, 585 Hrs, s/n 1298, Denis Cimaf DAF180D Mulcher Head ......................................$115,000
2018 Takeuchi TL12V2, 180 Hrs, s/n 0133, OROPS, Complete w/GP Bkt..........$66,500
2011 Hitachi ZX120-3, s/n 86630, Complete with 36” Bkt, 3073 Hrs ................................................................$54,500
NEW EQUIPMENT 52018 Sany 215, s/n 5228, Complete w/Ahwi M450e1100 Mulching Head, Priority Flow Divider 5 yr, 5,000 Hr. Sany Manufacturer Warranty ..............................$187,000
2018 Sany 26U, s/n 0558, 5 yr, 5,000 Hr Warranty, Complete w/18” Fleco Bucket ..................$26,500
2667 Hwy 378 Conway, SC 29527 l 843.397.2050 l www.rs91inc.com
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 22, 2019 • Page 11
Moving Construction Forward
Used Equipment
2014 850M WT LGP, Stk# 006042, 1590 Hrs, 130'' Blade, w/ 28'' Tracks ................................$93,500
2014 & 2015 Terex TA300 Articulated Trucks, 20 to Choose From! ........Starting from $192,500
from
Trekker Tractor
2016 CASE TV380, Stk#: 002359, ROPS, 1012 Hrs ................$49,900
2013 Chicago Pneumatic CP185JD, Stk#: 000389, **DEALER SERVICED**, 145 Hrs........$14,025
2014 CASE 580N, Stk #: 004615, 4WD, Open Cab w/Aux Hydraulics .. ..........................................$86,900 aq52fq
2015 CASE CX80C, Stk #: 006117.. ..........................................$85,800
2016 CASE SV212, Stk#: 005267, 1751 hrs,84’’ Single Drum Ride on Roller..................................$92,400
2015 CASE CX350D, Stk# 005039, 2515 hrs...........................$253,000
2018 CASE 586H, Stk#: 008221, 161 Hrs, 48'' Pallet Forks, w/ 22' Mast ..................................$85,800
2015 CASE 621F, #000884, w/1968 Hrs, S/N: NFF232546 ......$139,700
Miami
Jacksonville
West Palm Beach
Tampa
Fort Myers
Orlando
12601 W. Okeechobee Road Miami, FL 33018 (877) 971-7070 (305) 821-2273
9235 Busch Drive North Jacksonville, FL 32218 (904) 516-5380
1150 Barnett Drive Lake Worth, FL 33461 (561) 296-9710
1504 Tampa East Boulevard Tampa, FL 33619 (813) 341-4646
3051 Hanson Street Ft. Myers, FL 33916 (239) 690-0661
9481 Boggy Creek Road Orlando, FL 32824 (407) 888-0024
www.trekkergroup.com
Page 12 • May 22, 2019 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Caterpillar Launches Competition Pa. Congressman to Find the World’s Best Operators Mike Kelly Calls for Caterpillar has announced the launch of the 2019/2020 Global Operator Challenge Competition. Operators will test their skills against those of fellow operators around the world to determine who can claim the title of “best.” In each stage of the competition, operators will be challenged to test their agility, mental toughness and versatility, as well as their competence in using integrated technology to enhance machine performance, such as Cat Production Measurement and Cat GRADE systems. Operators qualifying in the local heats conducted by Cat dealers around the globe will participate in regional semifinal competitions that are to be held in Japan, Brazil, Spain and the United States during October and November 2019. The winners in each regional semi-final will take part in the global finals that will take place at ConExpoCon/AGG, Las Vegas, in March 2020. The crowned champion will be awarded an all-expense, “VIP” trip for two to a global Caterpillar facility of his or her choice. The Caterpillar 2019/2020 Global Operator Challenge will be the largestever competition of its type, following in the success of the European “New Range-New Rules” competition in October 2018 at the Caterpillar Demonstration & Learning Center in Malaga, Spain. In Malaga, 18 operators from 10 nations across Europe, the Middle East and Eurasia were in the final competition; German operator Sebastian Behr took the top prize. “Through the Global Operator Challenge, Caterpillar wishes to celebrate the diversity and skill of all operators around the world who use construction equipment every day and contribute to the success of our industry,” said Jessica Nunley, Global Marketing Innovations manager of Caterpillar Global Construction & Infrastructure division. “In addition,” said Nunley, “this competition will highlight the Cat Next Generation machines that are transforming job sites by increasing productivity to new levels, providing a new experience of comfort, and ease of operation through technology. We hope the Global Operator Challenge will attract more individuals to join our industry.” For more information, visit www.CatGlobalOperatorChallenge .Com.
Cadillac Tax Repeal
The Caterpillar 2019/2020 Global Operator Challenge will be the largestever competition of its type, following in the success of the European “New Range-New Rules” competition in October 2018 at the Caterpillar Demonstration & Learning Center in Malaga, Spain.
In each stage of the competition, operators will be challenged to test their agility, mental toughness and versatility, as well as their competence in using integrated technology to enhance machine performance, such as Cat Production Measurement and Cat GRADE systems.
Pennsylvania Congressman Mike Kelly (PA-6) called on Congress to take steps to authorize composite plans, repeal the Cadillac tax, and pass a long-term infrastructure bill during a visit to a local construction project on May 3. The Congressman made his comments while touring a local construction project by P.J. Dick Inc. along with representatives of the Master Builders of Pennsylvania, Constructors Association of Western Pennsylvania and the Associated General Contractors of America. “It is time to repeal the excise tax on health care plans that punishes tens of thousands of hard-working construction workers,” said Stephen E. Sandherr, the association’s chief executive officer. “Congress needs serious leaders, like Rep. Kelly who will work hard to find solutions to our nation’s most pressing issues, like the Cadillac tax, infrastructure investments, and regulatory reform.” While touring the job site, the Congressman and construction officials talked about the need for Congress to pass new infrastructure measures, enact the Middle Class Health Benefits Tax Repeal Act of 2019 and to continue with regulatory reform. They also discussed the industry’s impact on the economic health of the district, commonwealth, and country. The tour took place at the more than 346,000 sq. ft. project that P.J. Dick Inc. is building on a local project. Jake Ploeger, co-CEO of P.J. Dick Inc. said, “We always enjoy showcasing the great work of our talented craftspeople. We certainly support the expansion of Private Equity Bonds and encourage the repeal of the Cadillac Tax. Those initiatives would benefit the industry by allowing tax credits to finance public buildings and remove a burdensome surtax placed on employer-provided health insurance plans.” “It was an honor to showcase to Representative Kelly the construction work of our member firm and the skilled men and women of the trades working on the project that have chosen a rewarding career in construction as their livelihood,” added Jack Ramage, executive director of Master Builders of Pennsylvania. “America is doing better than ever. To continue that growth, we need to eliminate job-killing taxes and invest in our country’s infrastructure to meets the needs of the 21st century economy. That includes repealing the so-called ‘Cadillac Tax,’ which creates exactly the wrong incentive by punishing companies for offering good health insurance plans to their employees. We must also rebuild our nation’s crumbling infrastructure, including our ports, which are the life-blood of a vibrant economy here in Erie and throughout our nation,” said Kelly. “Thank you to the Master Builders of Pennsylvania, the Constructors Association of Western Pennsylvania and the Associated General Contractors of America for inviting me to tour this job site, which is another good example of what has resulted from the Tax Cuts and Jobs Act and the elimination of unnecessary regulations under this administration.”
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 22, 2019 • Page 13
DEMO SAL LE
VF-VENIERI
VF1.33B Compact, 4 cyl/52HP, Enclosed cab, c 4WD, Breakout force (loader) 11,680 lbs, Diig depth: 9’, Bucket cap. .5 cu/yd….$Call for quote q
VF2.63Plus Artic culated, 4 cyl/50HP, Enclosed cab, 4WD, Breakou ut force 11,700lbs ., Bucket cap. 1.0-1.5cu/yd… ……………..…$Call for quote
VF18.63B Articulated, 6cyl/228HP, Enclo osed cab, 4WD, Breakout force 34,400 lbs, Bucket cap. 4.5 -6.5 cu/yd d…………...$Call for quote
VF8.23F Articulated 4cyl/106HP, Enclosed cab, Breakout force (loader) 15,200 lbs, 4WD, Bucket cap. 1.64 cu/yd..$Call for quote e
DEMO SALE
VF4.63H Articulatted, 4 cyl/72HP, Enclosed cab, 4WD, Breakou ut force 12,345 lbs .,Bucket cap. 1.3-2.0 cu/yd… ………………$Call for quote e
VF10.33C 4cyl/1 106HP, Enclosed cab, 4WD, Breakout force (loader) 24,060 lbs, Bucket cap. 1.6 cu/yd…………...$Call for quote
VF7.63C Articulated 4cyl/106HP, Enclosed cab, 4WD, Breakout force 20.060 lbs, Bucket cap. 1.8-2.6 cu/yd……………...$Call for quote
VF10.63C Articulated 4cyl/106HP, Enclosed cab, Breakout force 17,636 lbs., 4WD, Bucket cap. 1.96-3.3 cu/yd…………….…$Call for quote
803-327-4949 | inffo@ o@appliedmach.com h | ams-venieri.com | Rock Hill, SC
Page 14 • May 22, 2019 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
GOOD BUYS ON NEW & USED IRON
1998 KOMATSU WA180-3, 3711 HRS, EX-DOT 2013 HAMM H11iP, 84” PADFOOT, 1762 HRS, 2014 CAT 312E, 2755 HRS, HYD. COUPLER 1999 HITACHI EX160LC-5, 9,500 HRS, 50% U/C UNIT, 50% MICHELIN TIRES, COUPLER & CAB, A/C, VERY GOOD CONDITION. ....$75,000 WITH 36” BKT, AUX HYD, U/C AT 70% PLUS, TIGHT & DRY, GOOD COND.,42" BUCKET .......... BUCKET, GOOD COND ..........................$29,500 VERY GOOD CONDITION, DRY & TIGHT ............ ..............................................................$29,500 ..............................................................$79,500 IN STOCK: 2004 KOMATSU PC160LC-7, 6749 HRS, MANUAL THUMB, GOOD CONDITION ....................................................................................$49,900
Guy Roof 2091 Bishop Rd. • Greensboro, NC 27406
336-382-9715 NEW UNUSED 2019 ROADWAY 1 TON VIBRATORY 2012 VOLVO SD77DX, 495 HRS, CAB, A/C, KUBOTA POWER, LIKE NEW COND, INCLUDES ASPHALT COMPACTOR, BRIGGS & HONDA POWER AVAILABLE ................................$9,500 PADFOOT SHELL KIT ............................$59,500
1999 HITACHI EX200LC-5, 6482 ORIGINAL HRS, 42” BKT W/MAIN PIN HYD. THUMB, U/C 70%, VERY GOOD CONDITION ........................$49,500
cecarolinasinc@aol.com Free Delivery within 200 Miles!
Dedicated DEUTZ Engine Support With all of the latest tools available, and a dedicated fleet of service trucks, our DEUTZ Power Centers and Service Centers are ready to provide you with responsive and qualified service in our shop or at your jobsite. Plus, we keep plenty of DEUTZ Genuine Parts and fluids in stock, in order to provide your DEUTZ engines with maximum performance and longer life.
ROCK HILL, SOUTH CAROLINA DEUTZ Power Center Southeast 583 Linkwood Road Rock Hill, SC 29730 (803) 818-3941 | sales.rockhill@deutzusa.com
Your source for DEUTZ engines and support across the Carolinas: deutzsupport.com
DEUTZ Power Center
SOUTHEAST
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 22, 2019 • Page 15
TRUST LEEBOY L .
AS DEPENDABL LE AS YOUR DAY IS LONG. O You work hard—and for all the right reasons: pride, quality, reputation, prosperity. You expect your equipme ent to work as hard as you do, to be every bit as tough, productive p and reliable as you are. You can afford nothing lesss. We are LeeBoy. The name behind the world’s mo ost dependable and productive commercial asphalt paving equip pment.
Locations: 11425 Reames Road Charlotte, NC 28269 215 Fanning Fields Road Mills River, NC 28759
Greater Charlotte Area: Mark Arcilesi (704) 400-3143 Jesse King (704) 619-1167 Central North Carolina: Jordan Thacker (980) 257-7220 Western North Carolina: Steve Brown (828) 243-0490 www.ascendummachinery.com
www.leeboy.co om
Page 16 • May 22, 2019 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Hyundai leads the industry with great warranties and a trusted dealer network that will support you. Midwest Buck & Knobby Equip Co. buckandknobby.com Ottawa Lake, MI 734-856-2811 Dakota Prairie Mandan, ND 701-805-8000
Reco Equip, Inc. recoequip.com Columbus, OH 614-276-0001 Monroe (Dayton Area), OH 513-539-5255 Perrysburg (Toledo Area), OH 419-874-6001 Florence, KY 859-727-7970 Indianapolis, IN 317-781-8100
Diamond Equip diamondequipment.com Road Machinery & Supplies Mt. Vernon, IL 618-242-2273 rmsequipment.com Evansville, IN 812-425-4428 Negaunee, MI 906-475-6488 Bowling Green, KY 270-781-1061 Rueter’s Farm Depot rueterco.com farmdepot.biz Council Bluffs, IA 712-366-5221 Caro, MI 989-673-6172 Grand Junction, IA 515-738-2571 Ionia, MI 616-522-5501 Carroll, IA 712-792-9294 Schoolcraft, MI 269-679-3939 Elkhart, IA 515-367-3054 Osceola, IA 641-223-8171 G W Van Keppel Sioux City, IA 712-266-3832 vankeppel.com Neligh, NE 402-917-5604 St. Louis, MO 314-872-8440 Team Boone Hardings Heavy Equip teamboone.net hardingsinc.com Bardstown, KY 502-369-2475 Lowell, IN 866-776-7176 Shepherdsville, KY 502-215-6235 Highway Equip Co. highway-equipment.com Canton, OH 330-915-8391
Titan Machinery lacrosse.titanmachinery.com La Crosse, WI 608-788-1025
J Gross Equip Inc. jgeinc.com Aberdeen, SD 605-229-4037
Yes Equip & Services yesequipment.com Milwaukee, WI 414-263-9001 Madison, WI 608-243-9253
Klochko Equip Rental Co., Inc. klochko.com Northeast Fair Haven, MI 586-725-4860 Melvindale, MI 313-386-7220 A. Montano amontanoco.com Martin Implement Sales, Inc. Saugerties, NY 845-247-0206 martinimplement.com Orland Park, IL 708-349-8430 All Island Equip Corp South Elgin, IL 630-883-3320 allislandequipment.com Wauconda, IL 847-469-0120 West Babylon, NY 631-643-2605 Midland Engine midlandengine.com Midland, MI 989-631-4608
Butler Equip butlerequip.com West Hartford, CT 860-233-5439 Chappell Tractor chappelltractor.com Milford, NH 603-673-2640 Brentwood, NH 800-616-5666 Concord, NH 800-358-6007
hceamericas.com
Correlli, Inc. Dundalk, MD 443-503-5641 George & Swede georgeandswede.com Pavillion, NY 585-584-3425
Southeast Atlas Equip atlasequ.com Marietta, GA 888-798-2304
Century Equip Rental centuryeq.com Harter Equip Inc. Dyersburg, TN 731-285-2875 harterequipment.com Millstone TWP, NJ 732-446-7600 Crosby Equip Co., Inc. crosbyequipmentco.com Highway Equip Co. Douglas, GA 912-384-4664 highway-equipment.com Macon, GA 478-257-8300 Zelienople (Pittsburgh), PA 724-452-7800 Diamond Equip, Inc. Dubois, PA 814-371-3600 diamondequipment.com La Vergne, TN 615-641-1100 Kahn Tractor & Equip Inc. kahntractor.com Earthmovers Construction Equip N Franklin, CT 860-642-7596 constructionequip.com Apopka, FL 407-809-5856 Lorusso Heavy Equip, LLC Fort Pierce, FL 407-401-8956 lhequip.com Walpole, MA 508-660-7600 Equip Resource Management equipresource.com Modern Group Ltd. N Little Rock, AR 501-223-8604 moderngroup.com Bristol, PA 800-866-3376 Grove River Allentown, PA 610-398-1101 groveriver.com York, PA 800-866-3376 Richmond Hill, GA 912-756-7854 Edison, NJ 800-866-3376 Hasbrouck Heights, NJ Highway Equip Co. 201-288-1441 highway-equipment.com Troutville, VA 540-992-4150 Pete’s Equip Sales & Rentals Inc. May • RHI petesequipmentvt.com mayequip.com Morrisville, VT 802-888-5138 robshydraulics.com Clayton, NC 919-773-1424 Seaview Grimesland, NC 252-752-1500 seaviewequipment.com Lexington, NC 866-629-3784 Bridgeport, CT 203-330-0130 N Benson, NC 919-243-0631 Rock Hill, SC 919-612-6300 TB Equip & Rental Summerville, SC 866-629-3784 tbequipment.net Columbia, SC 866-629-3784 Bangor, ME 207-262-0014 Greenville, SC 866-629-3784 Tracey Road Equip, Inc. Mid South Machinery traceyroad.com East Syracuse, NY 315-437-1471 gomidsouth.com Adams Center, NY 315-788-0200 Gulfport, MS 228-867-1555 Jackson, MS 601-948-6740 Kirkwood, NY 607-775-5010 Tupelo, MS 662-690-6553 West Virginia Tractor Co. wvtractor.com Charleston, WV 304-346-5301
Springdale Tractor Springdale, AR 479-361-2513 State Machinery & Equip Sales, Inc statemachineryeq.com Kenner, LA 504-464-0431 Stone Equipment Co., Inc. stoneequipmentco.net Alabaster, AL 844-786-6373 Montgomery, AL 844-786-6373 Teknia Networks & Logistics, Inc. teknialogistics.com Pinellas Park, FL 727-573-4343
West Abilene New Holland abileneequipmentcenter.com Abilene, TX 325-603-1328 Cascade Trader, Inc. cascadetrader.net Chehalis, WA 360-748-1182 Cisco Equip cisco-equipment.com Artesia, NM 575-748-1314 Odessa, TX 432-550-9181 Lubbock, TX 806-745-9595 San Angelo, TX 325-653-2121 Earhart Equip Corp. earhartequipment.com Tucson, AZ 520-889-6396 Four Seasons Equip, Inc. fourseasons-equip.com Houston, TX 800-234-5007 Dallas TX 866-270-1700 Jet City Equip jetcityequipment.com Oak Harbor, WA 360-675-4441 Marysville, WA 360-651-9079 Wenatchee, WA 509-888-8181 Masonry Equip & Supply Co. mescoequipment.com N Salt Lake, UT 801-619-2806 MECOM mecomequipment.com Stockton, CA 209-466-5135
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 22, 2019 • Page 17
Motor City Rents motorcityrents.com Phoenix, AZ 602-539-2911
THE HARDEST WORKING WARRANTY ON THE JOBSITE.
Nueces Power Equip nuecespower.com Corpus Christi, TX 361-289-0066 Laredo, TX 956-725-0066 San Antonio, TX 210-310-0066 San Benito, TX 956-361-0066 Victoria, TX 361-576-0066 El Paso, TX 915-541-0066 Oregon Tractor oregontractor.com Roseburg, OR 541-679-6211 Portland, OR 503-282-7211 Porter Group Usa portergroupusa.com Corona, CA 951-674-9999 Lakeside, CA 619-390-1197 Pacoima, CA 818-834-0102 Newark, CA 510-713-7368 W Sacramento, CA 916-372-5925 Wildomar, CA 951-678-9902 R & S Equip rsindinc.com Clovis, NM 575-769-8659 Springdale Tractor Tulsa, OK 918-224-1565 Texas State Rentals texasstate.equipment New Braunfels, TX 512-392-4555 Tractor Service tractorserviceonroute66.com Albuquerque, NM 505-345-8443
5 YR 3 YR
With 3-year/3,000-hour standard coverage and 5-year/10,000-hour structural coverage, our machines are backed by the hardest working warranty around, and guaranteed to keep you up and running longer.
STRUCTURAL
STANDARD
TOMORROWSEDGETODAY.COM
Page 18 • May 22, 2019 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
W&W Crane & Rigging Still Growing After 20 Years Every day is different in the crane and rigging business. One day, a crew might help erect a water tower. Another, it might be called upon to lower railroad cars onto their tracks. Each task brings its own challenges and its own satisfactions. Daniel Lizotte, the operations and sales manager of W&W Crane & Rigging, would not have it any other way. “They are all interesting projects, because they all have their unique skill sets,” Lizotte said in a recent interview. “You know — figuring out where you’re going to set the crane and what’s going to make the best picking point. I love every day. It’s a new challenge.” W&W Crane & Rigging was founded in 1998 by Henry Wall as an offshoot of Contract Erectors Inc., which he started in 1987, and which concentrated on steel erection. Wall’s intent in branching out was to provide more specialized crane and rigging
services to his customers, and, with its headquarters in Randleman, N.C., W&W has served the Piedmont Triad and surrounding area for more than 20 years. “I started with nothing,” Wall recalled. “The first crane I ever bought was an old Bucyrus-Erie, which cost me approximately $45,000, and I was worried how I was going to pay for it. I started out small, on the steel erection side of it, with a boom truck and five men. From 1987 to 1998, with steel erection booming, we had some good years, and I said, well, I am going to do this and see where it goes.” The first crane Wall purchased for the new concern was a 60-ton Link-Belt 8660. In 2002, he purchased a 70-ton, followed in short order by 175- and 120-ton cranes. Today, W&W employs seven workers, while Contract Erectors employs more than 50.
“They are all interesting projects, because they all have their unique skill sets. You know — figuring out where you’re going to set the crane and what’s going to make the best picking point. I love every day. It’s a new challenge.” Daniel Lizotte W&W Crane & Rigging
For W&W Crane & Rigging every day in their business is different and presents its own set of diverse challenges.
Besides the growth in fleet and staff, the other major change W&W has seen over the years occurred in 2012, when Wall made his daughter, Amy Wall Mong, a majority shareholder in the company. Mong took over as president in 2013. Her brother, Chad Wall, now heads up Contract Erectors, but their father has stayed on as vice president of W&W. “I have people who ask me, ‘Are you still there?’” the elder Wall joked. “And I say, ‘Yes, I’m still here, but they just keep me around here to have somebody to make fun of.’” The latest addition to the W&W crane fleet is a Link-Belt HTC 86110, procured from Pinnacle Cranes of Charlotte, which has become the company’s regular supplier. For W&W Crane & Rigging every day in their business is different and presents its own set of diverse challenges.
see W&W page 80
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 22, 2019 • Page 19
F FEEL THE E
POW WER OF O A JCB
SALES. RENTTAL. A SERVICE. AL. Your business Your b i needs d equipment i ment you can trust!! From backhoes and telehandlers to excavators and wheel loaders, MacKinnon JCB has as a complete range of machines you can be confident onfident will get the job done. Engineered to handlee the most rugged jobs while setting the industry standard tandard for safety, JCB equipment can be relied onn to keep you safe and productive. 0% financing and nd cash back offers are available! Stop by one of our ur five locations or visit us online to set up a demo orr request a quote today.
WWW.MA W.MA ACKINNONJCB.COM CKINNONJCB.COM NONJCB.COM 2230 N. U.S. Highway 301 Tampa, T ampa, FL 33619 (866) 706-1995
1915 N. Orangee Blossom T Trail rail Orlando, FLL 32804 (866) 620-5840 0-5840
2755 Marshall Drive Tifton, GA 31793 (866) 586-4281
ONLY C ON S T R U C T I ON N -G R A D E M A K E S TH E C U T. When you face tough jobs, it doesn’t matter whether it’s tree care, landscaping, plumbing or other underground construc u tion tasks. You need construction-grade. And if you need construction-grade, you need a Ditch Witch® mini skid steer. WE’RE IN THIS TOGETHER.
LOW -HOUR AND USED EQUIPMENT A VAIL ABLE LA VERGNE 140 Char ter Pl. // La Vergne, TN 37086 P: 615 -793-7576
©2018 The Charles Machine Works, Inc.
KNOX VILLE 3356 Rudy St. // Knoxville, TN 37086 P: 865 -970 -2840
6907 Broadway Avenue Jacksonville, FL 32254 (866) 554-6926
5566 6th Street W West est Lehigh Acres, FL 33971 (239) 458-5005
Page 20 • May 22, 2019 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
1988 CATERPILLAR 816B, S/N 15Z00863, LANDFILL COMPACTOR WITH EROPS, AIR, STRAIGHT BLADE.
1992 CATERPILLAR 816B, S/N 15Z01033, LANDFILL COMPACTOR WITH EROPS, AIR, STRAIGHT BLADE, AND REBUILT ENGINE.
CAT D6N XL, S/N AKM00929, EROPS WITH A/C, PAT BLADE, 4488 HRS
2005 CATERPILLAR D6R XL, S/N AAX01040, CAB, AIR, SWEEPS, S.T. BLADE WITH BRUSH RACK, EXCELLENT CAT U/C, NEW PAINT, 6623 HOURS.
BOMAG K300, S/N 9074, 112 HRS
2007 CATERPILLAR 826H, S/N AWF00363, LANDFILL COMPACTOR, EROPS, AIR, CARON BLADE, EXCELLENT CONDITION.
2003 CAT D5N XL, S/N AAG00428, PAINTED, EROPS W/AC, ROOT RAKE, 5913 HRS
2014 CATERPILLAR D6K2 LGP, CAB, AIR, PAT BLADE, RIPPERS, ACCUGRADE READY, VERY GOOD U/C, 4117 ORIGINAL HOURS, EXCELLENT CONDITION.
8724 Rutledge Pike Knoxville, TN 37924 (865) 525-5000 www.c-kequipment.com
Start Your Engines…
Hitachi Wheel Loaders’ Road 2 Pocono Sweepstakes Begins Last year, more than 4,000 Indy race fans signed in to win a pair of tickets to see the 2019 NTT INDYCAR Series ABC 500 at the famous Pocono Raceway as guests of Hitachi Construction Machinery Loaders Americas Inc. (HCMA). For 2019, Hitachi is offering them another chance. “The Road to Pocono Sweepstakes” was introduced last year as part of Hitachi’s new wheel loaders’ brand launch. Building on Hitachi Motorsports’ long connection with Indy racing, the sweepstakes is back again to bring two new lucky winners to the Pocono event in Long Pond, Pa. Customers and friends of Hitachi Wheel Loaders are invited to enter their ballot online (no purchase necessary) at www.hitachisweepstakes.com for a chance to win a once in a lifetime opportunity for a three-day, two-night weekend getaway alongside the Hitachi INDYCAR Series Racing Team. Official details are available at the website or from any authorized Hitachi wheel loaders dealer. A winner will be chosen at random from all entries submitted by the Sweepstakes deadline on July 19, 2019. The #WeRHitachiLoaders 3-day week-
end, from Aug. 16 to Aug. 18, culminates in the 2019 NTT INDYCAR Series ABC 500 on Sunday afternoon. The lucky winner and guest will receive: • Round-trip coach airfare and ground transfers for two • Two nights hotel accommodation (one room/double occupancy) • Two grandstand tickets for the 2019 NTT INDYCAR Series ABC 500 at Pocono Raceway • Two INDYCAR credentials Draws for monthly prizes also will be held on the 19th of every month for Hitachi wheel loaders gear. Hitachi has been a proud partner with Team Penske for eight years. In 2018, reigning Series Champion Josef Newgarden drove the Team Penske and Hitachi colors in the Hitachi Dallara/Chevrolet. Hitachi Motorsport continues to partner with Team Penske and Josef Newgarden for the 2019 Series. Hitachi also will continue as an associate sponsor with the entire Team Penske crew including the Dallara/Chevrolets driven by 2016 Champion Simon Pagenaud and Will Power, the 2014 title winner.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 22, 2019 • Page 21
Zero Turn for Mobility, A Fun New Spin for Pavers
info@gomaco.com ❘ www.gomaco.com Long, straight runs are nice. But many of you have curb and gutter projects with short runs, radii, and corners in parking lots or tight locations. info@gomaco.com ❘ www.gomaco.com GOMACO’s Xtreme curb and gutter machines have zero-turn capabilities for maneuverability. You’ll be able to place more curb than ever before and move your machine in ways you have never moved before. You’ll be able to pour a tight radius that you could only dream of before. GOMACO’s proprietary G+ controls makes your concrete paver smoother and easier to operate. So, if you want a Zero-Turn GOMACO Paver for your next paving season, you’d better call now. Our worldwide distributor network and our corporate team always stand ready to serve and assist you.
CAROLINA CAT
BLANCHARD MACHINERY
GREGORY POOLE
Serving Western North Carolina (800) 277-2080 CarolinaCat.com
Serving South Carolina (844) BLANCHARD (252-6242) BlanchardMachinery.com
Serving Eastern North Carolina (800) 447-3112 GregoryPoole.com
Page 22 • May 22, 2019 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
More M e Than an M hines Mach s IT’S IT S HOW WOR RK GETS DONE
SANY Dealers D ATLANTIC COASTAL EQUIPMEN NT SALES & RENTAL R 922 Longwoood Drive Richmond Hill, GA 31324 912.459.11155 acesalesandrrentals.com
CENTRAL ATLANTTA A TRACTOR SALES, INC. 7330 Delta Circle Austell, GA 30168 770.819.6600 centralatlantatractor.com
EQUIPMENTSHARE 11250 Business Bark Blvd. Jacksonville, FL 32256 573.289.2670 equipmentshare.com
G.W W.. V VAN AN KEPPELL COMPANY 5427 W. Bethany Road North Little Rock, AR 72117 501.945.4594 vankeppel.com
THE IRONPEDDLERS 2709 Faith Industrial Drive Suite 200 Buford, GA 30518 678.765.6300 5576 Export Blvd. Bl d Garden Cityy,, GA 31408 912.964.8249
3504 N. Rocky River Road Monroee, NC 28110 704.2289.8591 15 Reaady Mix Road London, n, KY 40741 606 878.7800 606.8 8 7800 878 30 Stooddard Garden Court Fountain Inn, SC 29644 704.2289.8591 ironpeddlers.com ddlers.com
MECO MIAMI, INC. 5825 NW 74th Ave. Ave. Miami, FL 33166 305.592.4332 mecomiami.com
NEWMAN TRACTOR 2841 Verona Road Verona, KY 41092 859.888.1588 2600 W. State Road B tow Bar t w,, FL 33830 863.777.5513 newmantractor.com
RICHARDSON N SER SERVICE 2667 Highway 378 #A Conwayy,, SC 29527 527 843.397.2050 50 rs91inc.com
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 22, 2019 • Page 23
SOUTHLAND MACHINER RY Y 8920 Weaver Ave. Leeds, AL 35094 205.699.2699 southlandmachinery.com m
TRAX PLUS 9800 Highway 503 Hickory,y, MS 39332 601.345.2296 traxplus.com
WHITEE OAK EQUIPPMENTT,, INC. 358 Kinngs Highway Fredericcksburg, VA 22405 540.3373.7755 11243 Washington W hi t Hi Highway h Glen Alllen, VA VA 23059 804.7798.9281
9115 Industry Drive Manassas Park, VA VA 20111 703.330.1333 3464 Pruden Blvd. Suffolk, VA 23434 757 538 1870 757.538.1870 whiteoakequipment.com
p | 470.552.SANY f | 770.632.7820
s sanyamerica.c com
e | sales@sanyamerica.com
3 COOPER CIRCLE, PEACHTREE CITY, 318 CITY GA 30269
Page 24 • May 22, 2019 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Blanchard Machinery Demos Next Gen Cat Equipment
O
n April 26 and May 7, Blanchard Machinery Company hosted two exclusive showcases of the latest in product innovation from Caterpillar that were each attended by more than 100 contractors working jobs throughout South Carolina. The first event was held in Inman, S.C., for folks that largely service the Greenville area, while the next was in Summerville, S.C. for those residing in the greater Charleston region. An earlier event took place in Columbia, South Carolina’s capital city, as well. Demonstrations of the Next Generation of Cat equipment were offered by Blanchard Machinery officials during both displays. The machines featured in Blanchard’s showcases in Inman and Summerville included the Cat D6 dozer; Cat 330 30-ton and integrated 3D Cat 336 36-ton excavators; the Cat 120 motorgrader; the Cat 308 CR mini-excavator with new stick steer and the Cat 299 compact loader with Trimble Earthworks Go! The Next Generation of Cat excavators are built to increase operating efficiency, lower fuel and maintenance costs and improve operator comfort with unique combinations of purposebuilt features designed to achieve productivity and cost targets. The power and speed of the Cat 330 provides the efficiency needed to handle all heavy-duty projects that require maximum productivity. The standard equipment provided as part of the Cat 336 excavator boost operator efficiency by 45 percent while lowering maintenance costs up to 15 percent. The new Next Generation Cat D6 LGP dozer moves material at a lower cost with a fully automatic transmission, outstanding fuel efficiency and reduced service and maintenance costs. A choice of Cat Connect Grade technology features adds to ease of operation. Users may choose from updated configurations and enjoy a fully redesigned cab. With the new Next Generation Cat 120 motor grader, options from cab to controls are in the user’s hands, along with better fuel economy and
maintenance costs to lower overall operating expenses. With a choice of levers and a steering wheel or joysticks, this model gives customers options to fit their needs. The Cat 308 CR mini-excavator with new stick steer has easy-to-operate, user-friendly controls and an intuitive Next Generation monitor that provides customizable machine operator preferences with easy-to-read information. The Cat 299 compact loader featuring Trimble Earthworks Go! is designed for fine grading and leveling of large commercial properties, housing pads, roadways, and parking lots. It can operate both manually and automatically with the use of laser or GPS grading systems. Blanchard Machinery will hold a spring sale and auction on May 30 at its used parts facility in West Columbia. CEG
Discussing Blanchard Machinery’s service capabilities (including 97 field service trucks and more than 200 technicians) are Joel Reynolds (L) of Blanchard Machinery and Eddie Jenkinson of Strange Brothers Grading in Taylors, S.C.
On the left are Joel Reynolds and Patrick Whitlock, both of Blanchard Machinery. Jeremy Peterson of Superior Grading listens to Andrew Lanford (R) of Blanchard Machinery as he points out a few of the benefits of the Cat 299 compact loader featuring Trimble Earthworks Go!
The Cat 299D compact loader featuring Trimble Earthworks Go! can operate both manually and automatically with the use of laser or GPS grading systems.
From the left are Sean Frizelle (Sitech Mid-Atlantic), Carlos Ramirez (Trimble), John Balanda (Sitech Mid-Atlantic), Todd Phillips (Gulf Stream Construction) and Matt Gendron (Propeller Aero).
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 22, 2019 • Page 25
Before Hundreds of Contractors at South Carolina Events
T.J. Savarese and Greg Johnson (both of Cleland Site Prep in Hilton Head, S.C.) talk with Greg Clark of Blanchard Machinery about the tight turning radius of the new Cat 120 all-wheel drive motograder. From the left are Jordan John and Jimmy and Neil Martin – all of Martin Brothers Construction Company in Gray Court, S.C.
Checking out the Cat 299D are Miguel and Nerari Real of Casarez Construction in Myrtle Beach, S.C.
Going over the next generation Cat 330 excavators are Trey Pierce and J.R. Garren (both of PAR Grading & Hauling in Spartanburg, S.C.) and Brian Stellbrink of Caterpillar.
Dee Alessandro and Shank Collins of Robert Collins Company in Barnwell, S.C. They currently run 12 Cat 336 excavators and four of them are the new Next Generation models.
Shown from the left are Boyd and Rozier Blanchard, Clark and Trey Banks (Banks Construction in Charleston), Joe Blanchard and Cat’s Troy Arrington.
Page 26 • May 22, 2019 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Eye in the Sky… 2014 KOMATSU HM400-3, EXCELLENT 29.5R25 TIRES, REAR CAMERA, FAST FUEL, MIND CONDITION ............................$154,000
2015 CAT 336FL, 34’ TGP, 54” HD GP BUCKET, VERY GOOD CONDITION ..$129,000
2012 JD 200DL, AUXILARY HYDRAULICS, GOOD U/C, GOOD CONDITION ..........$72,500
2000 CAT D3C LGP III, ROPS, PAT, GOOD CONDITION ........................................$21,900
2012 VOLVO EC380D LC, 4600HRS, AUX HYD., AUTO LUBE, 36’TGP, 66” GP W TEETH ..........................................................$119,000
2011 KOMATSU PC200LC-8,HYDRAULIC THUMB, 52” GP BUCKET, 32” SHOES, LOW HOURS, EXCELLENT ..........................$81,500
2013 KOMATSU D155AX-7, EROPS, EXCELLENT U/C, LOW HOURS ..................$179,000
2007 KOMATSU PC158USLC-2, LONG STICK, LOW HOURS, VRY GOOD U/C, VERY GOOD CONDITION ........................................$59,500
2000 CAT 953C II, EROPS, GP W/TEETH, EXCELLENT U/C..................................$49,500
2006 EXTEC 6000 PORTABLE SCREENER, 1280 HRS, HYDRAULIC GRIZZLY, HYDRAULIC LEVELING, GOOD TIRES, VERY GOOD OPERATING CONDITION..............................$58,500
NCDOT Receives Award for Drone Use During Florence
2013 VOLVO A40F, 8200 HRS, EXCELLENT TIRES, ORIGINAL PAINT, EXCELLENT SUPER CLEAN MACHINE ..............................$149,000
2012 CAT 730, AC, RETARDER, VERY GOOD TIRES, VERY STRAIGHT, TIGHT MACHINE ...... ..........................................................$124,500
2006 CAT 735, TAILGATE, EXCELLENT TIRES, VERY GOOD CONDITION ..................$112,500
704-888-1114 • www.wilcoxtractor.com Isuzu Reliable R 4L Engines... inside every REDT Tech ech™ 4L Power Unit.
Relia eliable liabl blle le The Isuzu 4L 2.2 2L (30-49 kW) engine has always been b reliable, eco-friendly, durrable, and technologically advance ed. The same qualities that ma ake the best Power Units. Contac ct your local Isuzu Distributorr and experience reliable power tod day.
Isuzu Motors A America, LLC :: 46401 Commerce Center Drive, Plymouth MI 48170 :: 734.58 82.9470 :: www.IsuzuREDT Tech.com ech.com
NCDOT photo
Aviation Director Bobby Walston (fourth from L) accepts the award on behalf of NCDOT.
The North Carolina Department of Transportation has received national honors for its innovative use of drones during the state’s coordinated response to Hurricane Florence. NCDOT was awarded the Association for Unmanned Vehicle Systems International’s Xcellence Award in the humanitarian category at the AUVSI’s annual Xponential Conference, which was held in Chicago April 29 to May 2. The award comes with a $5,000 prize, which the NCDOT’s Division of Aviation has elected to present to the North Carolina Disaster Relief Fund. The entry from the Division of Aviation’s drone program was selected out of more than 140 other entries worldwide. The division was honored for its groundbreaking use of emerging drone technology to keep people safe from a tragic storm in a way that had never been done on this scale. “Utilizing drones and other technological advances helped NCDOT keep people safe during Hurricane Florence and aided all our recovery efforts,” said state Transportation Secretary Jim Trogdon. “Being recognized for this exemplifies exceptional teamwork coming together to use technology in ways we couldn’t even imagine just a few years ago and is an example of ingenuity at its best.” More than a dozen NCDOT drone teams flew more than 200 missions and captured 8,000 pictures and videos of the damage and flooding left behind by Hurricane Florence in September, helping state and federal agencies make real-time decisions around aiding emergency response, planning detour routes, assessing future repair needs, expanding disaster declarations and warning the public of the dangers faced on North Carolina’s roadways. This was the first year that AUVSI has presented an Xcellence Award in the humanitarian category. Zipline, a partner with NCDOT on the Drone Integration Pilot Program, was also among the winners.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 22, 2019 • Page 27
job 'ss t ough. ough ug you'r o re to ou t uugher. gh
this job is a big one. forr machines thaat'll handle the tougheest terrain, terrain choose c doosann machines. ®
Doosan® ® and the Doosan logo are registered trademarks of Doosan Corp. in the United States and variou us other countries around the world. © 2019 Doosan Infracore North America, LLC. All rights reserved.
Authorized Doosan Dealers
ARKANSAS
MISSISSIPPI
Tennessee
Alma Tractor & Equipment Alma (479) 632 632-6300 6300
Bobcat of Jackson Richland (601) 948-3272
Bobcat of Nashville LaVergne (615) 941-4000
North Carolina
VIRGINIA
ACT Construction Equipment Charlotte (704) 323-7934 Wilmington (910) 254-3525 Winston-Salem (336) 397-5000
ACT Construction Equipment Cloverdale (540) 492-4861
Lift Truck Services Little Rock (501) 568-3330
ALABAMA R & M Equipment Renttals als Birmingham (205) 326-1111
FLORIDA
Bobcat of Jacksonville Jacksonville (904) 288-9181
Bobcat of Fort Myers Fort Myers (239) 334-4987
Synergy equipment Bobcat of Daytona Beach Daytona Beach (386) 274-1002 Bobcat of Miami Doral (305) 362-6632
Bobcat of Orlando Orlando (407) 273-7383 Bobcat of Tampa Tampa (813) 626-3470
LOUISIANA Equipment, Inc. Shreveport (318) 674-8824 Duhon Machinery Company Scott (337) 408-4050 St. Rose (504) 466-5495
Coasttal al Machinery Pensacola (850) 944-2002
Find your dealer at a doosanequipment.ccom/FindMyDealer d sanequipment.com doo
Page 28 • May 22, 2019 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
More Than 600 Attend Puckett Rents Miss. Open House
Some of the folks that contributed to the huge success of this event (L-R) included Tommy Kendall, Puckett Rents-Richland, Miss., store manager; David Fisher, Cat Financial; Bubba Gunter, Puckett Cat CCE sales manager; Megan Couch, Caterpillar; and Paul Gregory, vice president of Puckett Rents. It was a busy day for the guys from Sitech-South Mississippi during the vendor fair. (L-R): Kevin Johnson, Nathan Friday, D.J. Weis, Colby Carpenter and their Trimble representative, Carlos Ramirez Ortiz.
T
he rain poured down in the Jackson, Miss., area as the crowd poured in May 9 for Puckett Rents’ open house in Richland, a suburb of Jackson. Rain notwithstanding, more than 600 guests flocked to the event, which had been rescheduled from an earlier date because of a tornado watch and flooding. Guests enjoyed a great catfish fry, learned more about the products available at this location, and to see their Puckett Rents rental sales coordinators and staffers. Puckett Cat, Puckett Rents and manufacturer representatives for many of the products available at Puckett Rents turned out to lend their support. Under a big tent (and out of the rain), a vendor fair took place with more than 20 see PUCKETT page 74
The grand prize, a Tracker 12W Jon Boat with lots of DeWalt products and Cat “swag,” valued at approximately $2,500, was provided by the DeWalt team. (L-R): Scott Killin, Todd Monsour and Howard Lewis. Puckett Cat senior management and their customer-friends come together at the event. (L-R): Hastings Puckett and Paul Gregory of Puckett Cat; Stephen Rula and Derrell Fletcher of Hemphill Construction, Florence, Miss.
Another big group of rental customers from Fountain Construction, based in Jackson, Miss., turned out for some food and fun. (L-R): Andrew Dennis, Robert Clay, Neal McQueen, Wally Boone, Ray Floyd, Travis Kyzar and Todd Driver of Puckett Rents.
Looking over the Cat machine display inside the building (L-R) are Ryan Newman of Puckett Rents, and J.H. Edwards and Ken Bain of Ivey Mechanical, Kosciusko, Miss.
Bryan Tompkins (L), Bomac Electric, Clinton, Miss., stops to chat with his Puckett Rents salesman Todd Driver.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 22, 2019 • Page 29
Welcome to the Family EXCELLENT SERVICE & SUPPORT
“We are excited about the new opportunity to represent Hyundai and look forward to a long term relationship in Florida.” - Howard Abell, VP & GM Earthmovers Construction Equipment, LLC
Earthmovers was founded in 2013 and has recently become a part of the National Equipment Dealers Group of companies. Originally based in Stuart, FL, Earthmovers has grown significantly by adding a new branch in Ft. Pierce and a second location outside of Orlando. Both facilities provide equipment sales and rentals, fully stocked parts departments, and factory trained service personnel in the shop and on the road.
Apopka, FL
Fort Pierce, FL
For more information,visit
earthmoversfl.com 407-401-8956 2325 Clark Street, Apopka, FL 32703 3401 Oleander Ave, Fort Pierce, FL 34982
www.hceamericas.com
Page 30 • May 22, 2019 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
BRANDYWINE TRUCKS AND EQUIPMENT WE BUY EQUIPMENT!
(301) 372-0083 Shipping & Containerization Available
WE BUY TRUCKS!
WWW.BRANDYWINE-EQP.COM Reduced!
New Witzco Lowboys, Customization Available, 35-50 Ton in Stock ........$Call
2004 Warrior Powerscreen 1400, 6,522 Hrs, Cat 3054 Engine, New Paint, Good Conveyor Belts, New U/C Rails ....$Call
2002 Moffit M5500, 2220 Hrs, 12’ Max Height, Kubota Dsl, 48” Forks ..$17,500
(2) 2004 Volvo A30D’s, 6,824 and 7,005 Hours, Tailgates, Fair to Good Rubber, VERY Nice Trucks! ........$109,500 Each
Unused 2018 Cat 950M Wheel Loaders, Brand New! Enclosed Cab w/AC, 4.75 Cubic Yard Bucket, Rear View Camera, Warranty Available ........................$Call
(2) Available
‘13 & ‘14 Volvo L60G Loaders, EROPS, A/C, Hydraulic Q/C, Great Rubber ........ ........................................$85,000 Each
Foundation Equipment
2016 Komatsu PC240LC-11, 2,458 Hours, JRB Hyd. Q/C, 54” Bucket, DON’T MISS IT!......................$156,000
(2) Available
2001 CMI PR800-7 Milling Machine, Service Records from 2006 to Current, New Paint, 7’ Drum, Carbide Teeth, 12” Cutting Depth, 36” x 26’ Conveyor..$Call (2) Available
2005 John Deere 755C Series II Loader, 10,506 Hours, EROPS, A/C, Good Undercarriage, 22” Pads ............$44,500
Sales
2012 CAT 120M VHP, 7,200 and 8,050 Hours, Scarifier on one machine, Great tires, Great Condition ............................ ................................Starting at $98,500
Rentals
2015 Broce CRT350, EROPS, A/C, 208 Hrs, 8’ Broom, Water System, Like NEW! ......................................................$Call
2007 Cat 328DL CR Excavator, 10,608 Hrs, 48” CAT Bkt, CAT Hyd Q/C, Aux Hyd, 10’6” Stick ........................$84,500
Parts & Service
EXPERTISE deeper than the foundations you dig. More than machines…solutions.
1 800 PILE USA / ecanet.com
Authorized Dealer:
Pittsburgh 412 264 4480
Jacksonville 904 284 1779
Toronto 800 760 0925
Philadelphia 610 626 2200
Boston 508 821 4450
Greensboro 336 854 1220
Washington, D.C. 301 599 1300
NY/NJ 732 528 5477
Milwaukee 262 345 5715
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 22, 2019 • Page 31
Page 32 • May 22, 2019 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Brian Phillips (L) of Southland Machinery meets with his newest SANY customer Rick Crocker of Circle C Services in Odenville, Ala.
Transport of the SANY mini-excavator is made easy with a Dodge Ram 3500 pickup truck.
Machine Purchase Proves Key to Low Cost of Ownership In St. Clair County, Ala. there’s a hot bed of construction work. The bedroom community to Birmingham, Ala. sees new subdivisions cropping up on a regular basis. In the middle of this construction boom is the selfproclaimed “one man show” of Rick Crocker of Circle C Services, based in Odenville, Ala., in the heart of St. Clair County. Crocker’s forte is in small contracting jobs that he can do by himself, with just a dump truck and a couple of machines. Crocker has established himself as an integral member of the community and has built a reputation of excellence in his work. His career began with the city of Odenville’s utilities department, where for more than 21 years Crocker worked installing water lines, water mains, sewer lines, and anything else related to utilities construction and maintenance. In his spare time, Crocker started doing some dirt work on the side, primarily for local developers. As this side business continued to grow, equipment was later added to support the work. “Things actually got to the point where I couldn’t keep up with the demand for my hobby work,” Crocker recalled. “A lot of prayer led me to leave the utilities company and start my own business about a year ago,” Crocker said. “I’m just a one man show in this endeavor. I haul the machine to the job site, operate the machine, load the dump truck, and drive the dump truck to where the load is going. It’s just me.” The first machine he purchased for the start of his “side job work” was in 2013, when he bought a used JCB 1110 skid steer loader from Justin Cooper at Southland Machinery/JCB of Alabama in Leeds, Ala. From this machine, Crocker moved into another brand of used compact track machine, and then bought a brand new one.
Each of the machines were SSL’s or CTL’s. "After getting into contracting work on a full-time basis, I thought it was about time to get into the mini-excavator market,” Crocker explained. So he purchased a SANY SY35U mini-excavator. Crocker admitted that he had actually gone to see another dealer about a machine before testing the SANY, but ultimately never came to terms. “After I started to consider this investment, I got an e-mail from Brian [Phillips], my Southland Machinery sales rep who said he had something that I really needed to take a look at and demo. I had a job coming up, so I went to Southland, picked up the machine and demoed it for about a week and ended up signing the papers for it.”
Rick Crocker loads material at a job site in Odenville, Ala.
The SANY SY35U is loaded with ease in just a few minutes on Rick Crocker’s Gator trailer.
Crocker said that in the past he hadn’t really heard anything about SANY, so he never considered it. “Right after I got into the market, Brian told me about this machine,” he recalled. “I went straight to the web and starting digging around and researching the machines. What really brought me to the table was the whole package AND the five-year, 5,000-hour full machine warranty.” Crocker had rented about a half dozen other manufacturers’ mini-excavators in the past and had experience with the other brands. “I would put this new SANY up against any other brand on the market,” see MACHINE page 76
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 22, 2019 • Page 33
LE ET'S BUIL LD
To find out how we can help with your structure needs visit or call www.clearspan.com 1.866.643.1010
Y OUR ID EAL
STRUCTU URE
No Money Down n Financing, Term e s Up To 7 Yrs and As Low As 5.99% on buildings
Call Drew for Service & Brian for Parts.
704-233-4242 800-443-7569 Mon.-Fri. 7:30am-5:00pm Sat. 8:00am-12:00pm
3144 Hwy 74 East Monroe, NC 28112 www.brookssales.com
Page 34 • May 22, 2019 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Brooks Sales Shows Off Kubota Product Lines in N.C.
David Brooks (L) welcomes Greg Hargett of Hargett Farms in Mashville, N.C., to the open house.
Scott Heverly of Metro Tech Systems in Monroe, N.C., is checking out the different models of Kubota excavators. Johnny Thomas (L) of Thomas Contracting in Anson County, N.C., and Derek Brooks go over the Kubota LA525 tractor.
O
n Saturday, May 4, Brooks Sales in Monroe, N.C., hosted an open house and Kubota field day event. The well-attended gathering showcased the latest Kubota products, including excavators, compact track loaders, skid steer loaders and the rest of the top-selling Kubota product line. There was even a Kubota train to entertain the children. Kubota compact excavators are available in zero and conventional tail swing and allow contractors to tackle tough jobs in even tighter spaces. From large construction areas to small jobs in tight areas, Kubota has a wide range of excavators to meet the needs of any construction job. Its conventional tail swing models offer increased side and lifting stability, while the minimum tail swing models are designed for jobs in tight quarters. Kubota track loaders are built for jobs that require the traction and stability of tracks. The SVL Series features maneuverable and compact track loaders outfitted with Kubota’s original HighGrip tracks. The SVL Series is designed to handle difficult terrain and is sized for easy maneu(L-R) are Joan, Philip, and Sheila Brooks. verability, according ot the manufacturer. Compact track loaders also are versatile enough to work in tighter areas, maneuvering easily around residential and commercial areas. With a large assortment of attachments available, compact track loaders are a versatile base for grapples, hammers, snow blowers, rotary cutters, graders, tillers, tree pullers and more. Kubota skid steer loaders are ideal for both the toughest construction jobs and the most precise landscaping jobs. With the SSV Series as agile as it is powerful, greater power now comes in a smaller package. CEG
Going over the different options on the Kubota RTV machines are Philip Brooks (L) and Marvin Trull of Boggs Paving in Monroe, N.C.
Cousins Jeremy (L) and Derek Brooks represent the third generation of the Brooks family.
(L-R): Helping Mike McAuley of McAuley Farms in Monroe, N.C., with his parts needs are Mark Tarlton, Scott Phillips, Brian Hinson and Jayme Carroll, all of Brooks Sales.
Mike Stegall of Kubota checked out teh items on display.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 22, 2019 • Page 35
OPERATE WITH POWER R. PAVE WITH H PRIDE.
Designed with w the paving profes o sional in mind, mind the LeeBoy y 8520 is a robust-des o signed asphalt paver. PERFORMAN NCE FEATURES • Paving Widths h Variable a Up To 15’ (4.5 m) m • Choice of Hig gh Deck or Low Deck w}ÕÀ>Ì • Dual Electronic Steering • Sliding Operrator Control Station • 9 To on (8,164 ( , 4 kg) g) Capacity g p y Material Hopp pp per p • Heavy-duty Under U carriage and T Track rack Sy System ystem
CONTACT YOUR LOCAL REPRESE ENTATIVE BLANCHARD M MACHINER RY Y Serving South Car C olina 1 844 BLANCHA 1-844-BLANCHARD ARD BlanchardMachinery y.com/Paving .com/Paving
GREGOR RY Y POOLE Servin ng Eastern North Carolina 1 800 447 3112 1-800-447-3112 GregoryPoole.com
Page 36 • May 22, 2019 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Construction Employment Rises in 218 Metro Areas Construction employment grew in 218, or 61 percent, out of 358 metro areas between March 2018 and March 2019, declined in 83 (23 percent) and was unchanged in 57, according to a new analysis of federal employment data released May 1 by the Associated General Contractors of America. Meanwhile, new federal data on construction spending showed mixed results, as a steep decline in single-family homebuilding offset increases in multifamily and nonresidential construction. Association officials said the continuing demand for most construction underscores the need for federal enactment of immigration reforms to boost the supply of workers. “Fewer metros than in recent months recorded construction employment gains over the past year,” said Ken Simonson, the association’s chief economist. “However, the ongoing increase in spending on most categories of construction suggests that the lack of job growth is more likely due to a scarcity of qualified workers rather than a slowing of demand. In fact, there was a record number of job openings in construction going into March.” The Phoenix-Mesa-Scottsdale, Ariz. metro area added the most construction jobs during the past year (13,800 jobs, 11 per-
“Allowing employers to bring in guest workers for positions that can’t be filled otherwise will help local economies continue to grow.”
Stephen E. Sandherr
Associated General Contractors of America
cent). Other metro areas adding large numbers of construction jobs during the past 12 months include Atlanta-Sandy SpringsRoswell, Ga. (7,600 jobs, 6 percent); DallasPlano-Irving, Texas (7,400 jobs, 5 percent); Las Vegas-Henderson-Paradise, Nev. (6,600 jobs, 11 percent); and Seattle-BellevueEverett, Wash. (6,400 jobs, 6 percent). The largest percentage gain occurred in Monroe, Mich. (26 percent, 500 jobs), followed by Chico, Calif. (22 percent, 800 jobs); St. Cloud, Minn. (18 percent, 1,000 jobs); and Yuba City, Calif. (18 percent, 400 jobs). The largest job losses between March 2018 and March 2019 occurred in ChicagoNaperville-Arlington Heights, Ill. (minus 3,100 jobs, minus 3 percent), followed by
Kansas City, Kans. (minus 2,000 jobs, minus 10 percent); Anaheim-Santa Ana-Irvine, Calif. (minus 2,000 jobs, minus 2 percent); and Baton Rouge, La. (minus 1,800 jobs, minus 3 percent). The largest percentage decrease took place in Danville, Ill. (minus 20 percent, minus 100 jobs), followed by Niles-Benton Harbor, Mich. (minus 19 percent, minus 500 jobs); Atlantic CityHammonton, N.J. (minus 17 percent, minus 1,000 jobs); and Battle Creek, Mich. (minus 13 percent, minus 200 jobs). “Construction spending totaled $1.282 trillion in March, down 0.9 percent from February and down 0.8 percent from March 2018,” Simonson noted. “However, the yearly decline was confined to single-family
homebuilding, which fell by 8.4 percent over 12 months. At the same time, new multifamily construction spending jumped by 11 percent, private nonresidential spending increased by 2.1 percent and public construction spending rose 8.6 percent. The record 286,000 job openings at the end of February shows there were still plenty of projects needing workers in March.” Association officials said that federal officials can help ensure more metro areas have enough trained workers to carry out needed construction by providing a way for contractors to bring qualified guest workers into the country, coupled with strict safeguards for American jobs and reduced incentives for individuals to enter the country illegally. They urged Congress and the president to enact legislation such as the recently introduced Workforce for an Expanding Economy Act. “Contractors in most of the country are having a difficult time finding enough qualified workers to hire in order to keep up with the ongoing demand for construction,” said Stephen E. Sandherr, the association’s chief executive officer. “Allowing employers to bring in guest workers for positions that can’t be filled otherwise will help local economies continue to grow.”
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 22, 2019 • Page 37
Page 38 • May 22, 2019 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
SAVE TIME • SAVE MONEY SAVE LABOR • SAVE OIL • • • • •
No tools required No expensive hardware needed No more rags stuffed into hoses No more messy plastic caps The ultimate contamination control tool • One hand installation • Eliminate hydraulic oil spills & clean up • Quick installation & ease of usage • Safe for personnel & environment • Industry acclaimed • 100% Made in USA INTRODUCING FlangeLock Tool Boxes TM
4 Tool Boxes Available
All Include Slugs and O'Rings.
For more information contact Mike Pearl at 914.980.8890 or email mike @ flangelock.com
www.flangelock.com
Five facts about the lithium-ion batteries that are being used in construction equipment.
Five Things That You Might Not Know About Batteries Batteries are an important part of modern life and now Volvo Construction Equipment (Volvo CE) is starting to use them to power its machines — but how much do you actually know about them? Magnus Larsson, development engineer batteries, electromobility systems, presents five facts about the lithium-ion batteries that are being used in construction equipment. 1. They look nothing like conventional batteries To power something like a wheel loader or an excavator, you need a high level of system voltage and energy, which is more than a single battery cell (chocolate bar size) can provide. So, we generally take multiple cells and connect them together to create a battery pack. Looking at them, they are just big boxes — but there’s a lot going on inside. 2. Batteries come in all shapes and forms You can buy a complete battery pack unit from a supplier (as Volvo CE does today), or you can assemble sub-modules and incorporate them into a custom-fit pack unit, or you can build everything in-house from scratch. Battery packs are sized and shaped differently for different machine types. 3. They’re surprisingly big Large vehicles require large battery capacity — there’s no great surprise there. The lithium-ion battery packs we use in construction equipment can weigh more than 882 lb. Especially for large machines, there might
be a need to install more than one of these battery packs, so the overall battery weight could easily exceed one ton. However, when it comes to lithium-ion batteries, significant progress is being made with respect to energy density. Developers are working on lighter and more volume efficient batteries. This essentially means that we can get more energy for the same volume or get the same energy capacity cheaper. 4. They’re becoming cheaper At the moment, lithium-ion batteries are still quite expensive, but the price is constantly dropping. If the price continues to decrease at this rate, the cost barriers to electromobility innovation within the construction equipment industry will significantly reduce. This price decrease is a result of two factors: more battery demand globally, and an increase in energy density, as mentioned earlier. 5. We’re at the turning point where it makes sense to electrify big machines With current technology, compact machines — like Volvo CE’s recently announced range of electric compact wheel loaders and excavators — can put in a full day’s work on electric energy from batteries. We’re starting to enter this stage with bigger machines. Although regular recharging is still required, it’s now a matter of when, not if, electric batteries can meet the energy and power requirements of heavy construction machines.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 22, 2019 • Page 39
E_c U _ F`b çè C_d Y_æ W Cçd U YWb Z c d YW ]_c d f Wb c çd Z æ W d __æ å _b b _çV ]çZ ^d W^ç^U W" GYç^\c d _ _eb Wçc è U _^d b _æ T__] ]_f W]W^d ç^V ç *$ c WU _^V `çd U YZ ^X c èc d W] çd è_eb Ä^XWb d Z̀c `_d Y_æ Wc V_^ d c d ç^V ç U Yç^U W" :_b çVVZ d Z _^çæ Z ^å _b ]çd Z _^ f Z c Z d æ WWT_è" U _]# b _c U _
%/$1&+$5' 0$&+,1(5< 6HUYLQJ 6RXWK &DUROLQD %/$1&+$5' %ODQFKDUG0DFKLQHU\ FRP 3DYLQJ
*5(*25< 322/( 6HUYLQJ (DVWHUQ 1RUWK &DUROLQD *UHJRU\3RROH FRP
Page 40 • May 22, 2019 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Trucks & Trailers
SECTION
Pages 41-44
To view our current comparison trailer specification charts visit www.constructionequipmentguide.com
International Celebrates International CV Series Milestone International Truck celebrated the first customer delivery of the International CV Series to Team Fishel, a provider of utility engineering, construction and network installation services. Hosted at a brand-new Rush Enterprisesowned Custom Vehicle Solutions facility in Denton, Texas, the event brought executives from Navistar Inc., Rush Truck Centers, Team Fishel and Godwin Manufacturing, who bodied the truck, together to celebrate the occasion. The event was highlighted by Dennis Huffmon, senior vice president of U.S. Sales at Navistar, handing over the keys to John Phillips, president and CEO of Team Fishel. “We’re proud to present the first CV Series production unit to Team Fishel,” said The delivery is the first of a number of vehicles that Team Fishel Huffmon. “I’d also like to acknowledge the will receive after making the largest single retail purchase to date Dennis Huffmon, senior vice president of U.S. Sales of Navistar, prepares for the unveiling. outstanding customer support from Rush for the CV Series. Truck Centers, whose commercial “We are proud to support Navistar truck expertise represents a competiwith the launch of the CV series tive advantage experienced across chassis and to perform installations our entire International Truck dealer at our new, state-of-the-art Custom network.” Vehicle Solutions facility,” said Chris “Customers have told us in no Simpson, regional general manager, uncertain terms this market is ready Custom Vehicle Solutions and for a different choice,” Huffmon conPerfection Truck Parts & Equipment. tinued. “These customers want more “This is another way we provide than a truck, they want a true busisuperior solutions to our customers ness partner. With unmatched comacross the country.” mercial expertise, partners such as With the CV Series, customers Rush Truck Centers, and a dealer also can utilize International Truck’s service network that specializes in dealer network — more than 700 diesel power, International Truck is a service locations and over 7,600 welcomed alternative to customers ASE-certified commercial dieselseeking more.” train technicians. They also are The delivery is the first of a numbacked by a commercial-grade parts ber of vehicles that Team Fishel will network where 90 percent of parts receive after making the largest sinare available through either dealer gle retail purchase to date for the CV inventory or International’s network Series. As a company with more than 30 offices in 13 states, more than Hosted at a brand-new Rush Enterprises-owned Custom Vehicle Solutions facility in Denton, of parts distribution centers. 2,300 employees and over 1,600 Texas, the event brought executives from Navistar Inc., Rush Truck Centers, Team Fishel and About Team Fishel trucks ranging from class 4 to 8, Godwin Manufacturing, which bodied the truck, together to celebrate the occasion. Team Fishel was founded in 1936 Team Fishel saw the CV Series as the and is headquartered in Columbus, bringing with it the power, safety and dri- er specializing in commercial vehicles, the perfect fit for its needs. Ohio. A 3rd generation, family-owned busivability that gives us the very best tool to CV Series brings with it the same tough“We have customers across the United ness, Team Fishel is a utility engineering, ness built into International’s larger trucks. States who count on us to get the job done provide for our customers.” Since its launch in November, the CV Consistent with this commercial grade construction and network installation conevery single day, and it’s extremely important that our vehicles are up to that chal- Series has disrupted the Class 4/5 markets. toughness, the CV Series is able to accom- tractor serving the broadband communicalenge,” said Phillips. “I have no doubt that As the only truck within the class designed, modate a wide range of specialized body tions, electric power, natural gas and low voltage technology industries. the CV Series will rise to the occasion; distributed and supported by a manufactur- types with an emphasis on ease of upfit.
Page 42 • May 22, 2019 • www.constructionequipmentguide.com • Truck & Trailer Section • Construction Equipment Guide
Does you urr trailer live up to iits name?
RING POWER CORP.
7RZPDVWHU WUDLOHUV DUH EXLOW XVLQJ KLJK JUDGH VWHHO QDPH EUDQG FRPSRQHQWV DQG $PHULFDQ KDUGZRRGV :H ZRQÉšW FXW FRUQHUV WR VDYH D EXFN ZH EXLOG LW WRXJK VR RX FDQ PDNH RQH 2XU WUDLOHUV VWDUW XW WRXJK DQG VWD\ WRXJK VR WKH\ DQ VDIHO\ KDXO \RXU HTXLSPHQW GD\ IIWWHU GD\\ \HDU DIIWWHU \HDUU
T TRO
500 World Commerce Parkway St. Augustine, FL 32092 904-494-7631 www.ringpower.com Brooksville 352-797-9500 Daytona Beach 386-947-4939
Learn more: towmasterr.com/more .com/more
Jacksonville 904-714-3517 Lake City 386-755-3997
2 U X HF YH RG V D EX RQ RU P VX VLRQ ZK KLW N ZRR N IW YHUWDLO G WZR
Lakeland 863-606-0512
Palm Bay 321-725-6420 Sarasota 941-359-6050
'2:1/2$' 285 $33
6HDUFK Éť7 7R RZPDVWHUÉź
SV
7LOW 'HFN +\GUDXOLF 7DL +\
AM ERICA A’S BEST BUI L LT T TRAILERS S FOR P ROFES R SIONA L HA ULERS
R
025( 02'(/6 ʀ 025( 237,216 ʀ 025( &+2,&(6
Call 800 0-462-451 462 451 17 WR ĘłQG \RXU QHDUHVW GHDOHU RU visit one of these:
YANCEY BROS. CO.
Tallahassee 850-514-1958 Tampa 813-671-3200
F QV LVW IW GHU VW
'UR HF
Ocala 352-620-0660 Orlando 407-856-4851
VSULQJ
www.yanceybros.com 330 Lee Industrial Blvd. Austell, GA 30168 800-282-1562
Albany 800-768-2892
Calhoun 800-752-9804
Dacula 800-545-2945
Macon 800-633-5180
Savannah 800-755-8382
Valdosta 800-755-6841
Augusta 800-446-5131
Columbus 800-633-5240
Kennesaw 844-962-7368
McDonough 855-901-0100
Statesboro 888-764-6506
Washington 888-678-3211
Waycross 888-948-2443
Mack Displays Second-Gen PHEV Class 8 Drayage Truck Mack Trucks displayed its second-generation zero-emission capable Class 8 drayage truck at the California Air Resources Board (CARB) Low Carbon Transportation Heavy-Duty Showcase in Sacramento, Calif. The plug-in hybrid electric (PHEV) truck, which is based on a Mack Pinnacle axle back daycab, has been operating in revenue service with a customer drayage fleet for more than 12 months. The CARB showcase features projects funded under the California Climate Investments program. Grant awardees presented key project findings, lessons learned and next steps to advance clean technology in heavy-duty applications on one of three technology panels. The morning began with a legislative press event and also included a poster session to facilitate dialogue and networking. “Mack Trucks has been a powertrain innovator for more than a century, and we’re proud to showcase our current and developmental technologies to help reduce emissions,� said Jonathan Randall, Mack Trucks senior vice president, North American sales and marketing. “Testing of this truck has allowed us to validate the emission reduction potential of the PHEV technology in combination with self-learning algorithms to con-
trol electric operation. We look forward to continuing real-world testing, as well as collaborating with CARB, SCAQMD and others.� The truck is being tested as part of a $23.6 million project led by the South Coast Air Quality Management District (SCAQMD). The goals of the project include reducing pollution and greenhouse gas emissions at locations with heavy freight volumes, including ports, rail yards and the freight corridors connecting them. The truck is an evolution of the first Mack PHEV drayage truck, which was built as part of an earlier SCAQMD-sponsored project and displayed
during Advanced Clean Transportation (ACT) Expo 2016. That truck underwent more than six months of successful testing in a customer drayage fleet at the Ports of Long Beach and Los Angeles. Similar to the first-generation truck, the second-generation PHEV drayage truck is capable of zero-emission operation due to the integration of a Mack MP7 diesel engine with a parallel hybrid system and lithium-ion battery pack. Unlike the first-generation truck, which utilized geo-fencing capabilities similar to those enabled by Mack’s GuardDog Connect telematics platform to switch between zero-emission and hybrid
operating modes, the second generation truck relies on an adaptive self-learning algorithm to identify and create zero-emission zones in order to maximize all-electric operation. During normal operation, the truck records the load, speed, and power and torque demand, analyzes that data and combines it with GPS location information to identify, create and store in its memory zones where the electric driveline is capable of operating in zero-emission mode. The truck learns from its operating patterns and, on subsequent trips through these zones, the truck automatically switches from hybrid operation to zero-emission operation. The driver also can use a button in the dash to manually override the mode selection if needed. This self-learning approach has enabled the second-generation truck to operate in zero-emission mode more than twice as much as the first-generation truck, which relied solely on preset geo-fences, according to the manufacturer. The dramatic increase in all-electric range was achieved with no changes to battery pack size or capacity, or truck performance. For more information about Mack, visit www.macktrucks.com.
Construction Equipment Guide • Truck & Trailer Section • www.constructionequipmentguide.com • May 22, 2019 • Page 43
Page 44 • May 22, 2019 • www.constructionequipmentguide.com • Truck & Trailer Section • Construction Equipment Guide
Utility Equipment Service, Inc. www.1ues.com 4584 Tom Lunn Road Spring Hill, TN 37174 931-489-0900
Smyrna Truck www.smyrnatruck.com 2158 Atlanta Road 3860 Social Circle Parkway Smyrna, GA 30080 Social Circle, GA 30025 855-269-5347 855-269-5347
Acme Truck Body email: floridatrucks@hotmail.com 885 US Highway 1 Vero Beach, FL 32960 201-401-7733
,?7,90,5*, @6< *(5 ;9<:; 8<(30;@ ;/(; 0: 796=,5 <RX NQRZ ZKDW \RX QHHG WR KDXO )HOOLQJ KDV WKH WUDLOHU WR JHW LW WKHUH :LWK RYHU \HDUV FRPELQHG LQGXVWU\ VDOHV H[SHULHQFH ZH KDYH WKH DQVZHUV WR \RXU VSHFLDOL]HG WUDLOHU QHHGV
THE STORM JUST HIT AND WE WENT FROM DONATING TO THE FOOD BANK TO NEEDING IT. Donna, Louisiana
-; 0 : VSULQJ ULGH
2SWLRQDO HOHFWULF K\GUDXOLF â [ ú UDPSV . HOHFWULF K\GUDXOLF FXVWRP MDFN ZLWK UHPRWH DLU EUDNHV ' ULQJV DQG FXVWRP IHQGHU KHLJKW
HUNGER IS A STORY WE CAN END. FEEDINGAMERICA.ORG
Atlantic Coastal Equipment Sales & Rentals 922 Longwood Drive Richmond Hill, GA 31324 912-459-1155 www.acesalesandrentals.com
Richmond Machinery 1701 Roseneath Road Richmond, VA 23230 804-359-4048 www.richmondmachinery.com
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 22, 2019 • Page 45
$37.8M Krome Ave. Reconstruction Project Reaches Phase 8 KROME from page 1
in providing a safer, more efficient commute for drivers in the area. The multi-use path provides a dedicated trail for bicyclists and pedestrians.” The construction is being paid for by state and federal funds. Prior to construction, this part of Krome Avenue consisted of one northbound and one southbound lane. The infrastructure was designed by A&P Engineers and Jacobs Engineering. Construction engineering and inspection services are being provided by The Corradino Group. “Work spans a long corridor and that brings a lot of coordination opportunities,” said Corradino Senior Project Engineer Victor Ortiz. “At least six months before the construction started, the team was working with utility companies to remove conflicts from the project area. We were also reviewing and processing shop drawings and informing the community of the upcoming work to make sure the contractor could hit the ground running on day one of the contract.” To complete this project safely — for motorists and construction crews — work zones have been established throughout the corridor next to mainline Krome Avenue to maintain open travel lanes. When needed, travel lanes may be closed between 9 a.m. to 3:30 p.m. weekdays and weekends; 9 p.m. to 5:30 a.m. Sunday through Thursday; and 11 p.m. to 7 a.m. Friday and Saturday. Detours may be used as
Florida DOT photo
Rebar is placed as work proceeds on the canal bridge.
Florida DOT photo
Florida DOT photo
One of two new 69 ft. bridges is constructed over the C-102 Canal. Each bridge will carry traffic in one travel direction.
needed to establish traffic shifts and when rebuilding side streets. A previous phase affected traffic for more than three years, and FDOT is relying on drivers to continue to be patient, allow for extra time to reach their destinations, obey all posted signs and speed limits, expect increased dust and noise and be aware of workers and equipment in the construction area. “The success of these projects relies on a strong partnership between the team, contractor and community,” Leslie said. Halley Engineering completed most of the drainage work along mainline Krome Avenue in the first phase of work and has nearly completed construction of one of the new bridges over the C-102 Canal. The contractor will soon rebuild the road and side streets, installing drainage, light poles and traffic signals and constructing the multiuse path. “We established an extremely aggressive schedule to complete this project as quickly as possible,” said Michael Halley, HEC’s senior vice president. “Collaborating with the FDOT team is critical to resolving issues quickly as every part of the schedule is important to meet our target completion date.” HEC is scheduled to switch traffic into the project’s next phase during the spring. The completed bridges will be 69 ft. long. Each will be two lanes wide, and the widest section of the bridge decks will be approximately 56 ft. Approximately 180 cu. yds. of concrete has been poured for the northbound bridge’s substructure, superstructure and approach slab. “This project includes the construction of two separate bridges — one for each travel direction,” Ortiz said. “The first bridge is almost complete and ready for traffic. The existing structure will be torn down and a wider bridge constructed to handle the additional travel lane.” Peak days will see approximately 40 to 50 HEC and subcontractor employees on site. The subcontracting firms see KROME page 66
Florida DOT photo
The work site extends 6.2 -mi. along Florida State Road 997 from Southwest 236th Street to Southwest 136th Street.
Page 46 • May 22, 2019 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 22, 2019 • Page 47
LINK-BELT MID ATLANTIC www.link-beltmidatlantic.com Ashland, VA 866-955-6071 Chesapeake, VA 800-342-3248 Frederick, MD 833-546-5235
HEAVY MACHINES, INC. www.heavymachinesinc.com 3930 East Raines Road Memphis, TN 38118 800-432-8902 2115 N. Thompson Lane Murfreesboro, TN 37129 877-200-5654 5200 Hollywood Ave. Shreveport, LA 71109 800-548-3458 364 Bob Jobe Rd. Gray, TN 37615 855-201-7453
CROSBY EQUIPMENT COMPANY, INC.
10110 Roberts Way Covington, GA 30014 770-788-0888
www.crosbyequipmentco.com 1826 South Peterson Avenue Douglas, GA 31535 912-384-4664
7651 Theodore Dawes Rd. Theodore, AL 36582 251-653-5955
5368 Hawkinsville Rd. Macon, GA 31216 478-257-8300
825 31st Street North Birmingham, AL 35203 205-323-6108
MID SOUTH MACHINERY, INC. www.gomidsouth.com 3233 Highway 80 West Jackson, MS 39204 601-948-6740 3145 Cliff Gookin Blvd. Tupelo, MS 38801 662-690-6553 14336 Seaway Road Gulfport, MS 39503 228-867-1555
www.gsequipment.net Tampa, FL 866-586-8956 Pompano Beach, FL 954-327-8808 Ft. Myers, FL 239-334-6063 Tallahassee, FL 850-574-0892 Orlando, FL 407-859-9160 Jacksonville, FL 904-268-4400
Page 48 • May 22, 2019 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Pages 49-60
Crushing, Screening & Recycling Section For more information on crushing, screening and recycling equipment, visit CEG's Web site at www.constructionequipmentguide.com.
Liebherr Features Material Handling Machines at ISRI 2019 Liebherr USA Co. Construction Equipment division displayed the LH 22M and LH 30M material handlers and the L 550 XPower wheel loader at the Institute of Scrap Recycling Industries 2019 convention and exposition in Los Angeles, Calif. State-of-the-Art Engine Design and Technology for the Recycling Industry The LH 22M material handler has a reach of nearly 33 ft. (10 m), and a sturdy, compact design, which makes it particularly suitable for deployment in the area of recycling. It has the latest engine and hydraulics technology, developed in-house by Liebherr. The LH 22M is equipped with a fuel efficient 143 hp (105 kW) engine that meets emissions standard IV. The LH 22M and LH 30M both feature a 4-cylinder inline diesel engine from Liebherr. The LH 30M produces 190 hp (140 kW). This strong engine output results in more available torque for powerful machine movements, according to the manufacturer. Load peaks are intelligently managed, which allows maximum torque availability at all times. These material handlers combine intelligent electronics with sensitive hydraulics and ensure precise and finely controlled work with fast and powerful movements. Speed and power are available whenever they are needed. Liebherr’s engine technology features intelligent machine controls that optimize the interaction of the drive components to ensure maximum efficiency and power. Liebherr-Power Efficiency (LPE) enables machines such as the LH 30M to operate with the lowest specific fuel use while maintaining maximum performance. Attachments Available for All Applications At ISRI 2019, the LH 22M was displayed with a Liebherr sorting grapple and the LH 30 had a Liebherr type 64 grapple. Attachments are available to suit any application. The components are configured for a long service life even when subjected to
A Liebherr LH 22M material handler loading a container.
heavy lateral stresses during demanding tasks. Liebherr offers a wide variety of attachments, machine options and configurations to meet specific application requirements. Technology Provides Comfort and Safety The operator cab of the LH 22M and LH 30M offers premium conditions for healthy and productive work. The foldable left armrest permits easy and safe entry into the cab. Smooth, precise steering movements are conveniently performed using the joystick, eliminating the need to reposition hands during the work cycle. Replacing the steering wheel in favor of joystick steering provides additional legroom and a clear
view of the working area. The Liebherr L550 XPower wheel loader on display at the ISRI 2019 exhibit booth featured the full guarding package offered, which protects vital areas of the machine. The wheel loader also has particle protection and an air pre-cleaner. This, combined with the optimal placement of the cooling package, prevents debris contamination in the cooling components, according to the manufacturer. The L 550: Smart Design The Liebherr-XPower driveline, paired with Liebherr-Power Efficiency considerably increases machine uptime and fuel efficiency. Together this design reduces the wheel loader’s fuel consumption by up to
30 percent when compared to conventional travel drive systems. In addition, the Liebherr-XPower driveline brakes automatically. The service brake acts only in a support function and is therefore subject to minimal wear. A continuous tractive effort control of the XPower driveline prevents wheel spin. Combined with automatic self-locking differentials, tire wear is reduced by more than 25 percent. Finally, gaining access to the engine on Liebherr XPower wheel loaders is safe and easy. Operators can easily reach checkpoints and critical maintenance points on the machine, which means faster turnarounds and more uptime. For more information, visit www.liebherr.com.
Page 50 • May 22, 2019 • www.constructionequipmentguide.com • Crushing, Screening & Recycling Section • Construction Equipment Guide
TRANSFORMING MORE THAN JUST PROFITS. The unique ALLU Transformer transforms your base machine into a mobile, multi-function tool that will screen, crush, mix, and load in a onestep operation. It transforms waste material into valuable material, as you utilize and reuse all materials from your jobsite. It transforms your processes, as reduced cycle times increase your production and efficiency. And, it transforms your profitability, as you save on operating costs while producing a valuable end product.
ALLU.NET
ALLU USA East Brunswick, NJ Tel 800 939 2558 | usa@allu.net
Construction Equipment Guide • Crushing, Screening & Recycling Section • www.constructionequipmentguide.com • May 22, 2019 • Page 51
VISIT THESE SCREEN MACHINE DEALERS
+
Gateway Bobcat www.bobcatofstl.com Tennessee T ennessee
960 Alfred Thun Road Clarksville, TN 931-436-9555 149 Industrial Blvd. LaV Vergne, ergne, TN (Nashville) 615-941-4000
=
Highway Equipment
www.highway-equipment.com North Carolina, South Carolina, Virgina 305 Executive Park Dr NE Concord, NC 980-781-4510 8071 Lee Hwy Troutville, V VA A 540-992-4150
CRUSHH EVERRY JOBB
Thompson Tractor
™
www.thompsontractor.com Alabama, Florida Panhandle
®
2401 Pinson Highway Tarrant, T arrant, AL (Birmingham) 205-841-8601 Also available at all other Thompson locations in Alabama and Florida
AMERICAN-MADE ADE INNOV VA ATION SINCE 1966 966 800-837-3344
740-927-3464
email@screenmachine.com
Learn more at www.screenmachine.com
Page 52 • May 22, 2019 • www.constructionequipmentguide.com • Crushing, Screening & Recycling Section • Construction Equipment Guide
Lake Erie Portable Screeners Introduces Pitbull PB678
Heavy duty “D” rings make for safe and efficient loading and unloading.
Seen here with its larger counterpart, the Pitbull PB148, the Pitbull PB678 features a large access opening for easy material removal.
The PB678’s single bolt bar assembly makes servicing quick and easy.
The Pitbull PB678 joins the company’s lineup as a smaller version of the Pitbull 148 static grizzly. The new grizzly’s designation — PB678 — references its 6-ft. deep, 7-ft. high and 8 ft-wide dimensions. The PB678 is just as durable as its 8-ft. deep by 14-ft. wide by 10-ft. high counterpart, and is able to withstand demanding applications and years of service with a rugged, tubular frame construction. The grizzly’s compact size offers excellent portability and is ideal for work with skid steers and backhoes. Applications include landscape and municipal work, as well as work on tight construction sites where compact equipment is required. The PB678 transportability also makes it an ideal rental unit. The Pitbull PB678 comes factory-equipped
The new Pitbull PB678 grizzly’s compact size makes it ideal for work with smaller equipment, such as skid steers and backhoes.
with 18 bars manufactured of 2-in. square steel tubing with a ¼-in. wall thickness. Set at approximately 2-1/2 in. minus spacing, the readily accessible bolt on attachment of the bars makes spacing adjustments to accommodate different materials sizes quick and easy. Additional bars may be added to change up the configuration to a minimum of approximately ½-in. spacing, or bars may be removed to facilitate screening of larger materials. Despite its compact size, the new grizzly features a large access opening under the screen deck for removal of materials and an expansive 76-in. deep by 100-in. long deck area. The PB678’s operating weight is 2,416 lbs. and is manufactured with heavy duty “D” rings for safe and efficient loading and unloading. For more information, visit www.pitbullscreeners.com.
Lake Erie Portable Screeners has introduced its new Pitbull PB678 static grizzly.
Construction Equipment Guide • Crushing, Screening & Recycling Section • www.constructionequipmentguide.com • May 22, 2019 • Page 53
Page 54 • May 22, 2019 • www.constructionequipmentguide.com • Crushing, Screening & Recycling Section • Construction Equipment Guide
Cruushing g and Sccreen ning forr Any Size ize Contractor Conttractor RENTALS E ABLE AILABL VA AV A
TO LEARN MO ORE VISIT: RUBBLEM MASTER.COM OR CALL (800) 230-0418
IMPACT CRUSHER WE EAR PARTS
SO OLUTIONS FO OR YOUR CRUSHING NE EEDS DS · Redu uced wear costs · Incre eased crusher productivit ctivity ty · Reduced maintenance · Impro oved safety aggregates@m magotteaux.com · www.magotteaux.com ux com
Construction Equipment Guide • Crushing, Screening & Recycling Section • www.constructionequipmentguide.com • May 22, 2019 • Page 55
A WIRTGEN GROUP COMPANY A
THE EVOLUTION OF INNOVA VATION. T THE EVO-LINE FROM KLE EEMANN
EVO IT’S ALL ABOUT EVOLUTION. The demands placed on plant s in the contrac ting sec tor are high: maximum output matched with cos tef fec tive operation – and all for the mos t diverse applications. This is exac tly what dis tinguishes KLEEMANN E VO -Line plant s. Thanks to highly innovative solutions, such as an advanced material flow concept, continuous feed sys tem, out s tanding safet y concept s and many more, KLEEMANN’sE VO -Line mobile jaw crushers, impac t crushers and cone crushers deliver a solid plus in per formance, ef ficienc y and versatilit y. Progress calls for real innovation – the KLEEMANN E VO -Line. w w w.wir tgen- group.com//a america
WIR RT TGEN AMERICA, INC. · 6030 Dana Way · Antioch, TN 37013 · T Telephone: elephone: 615-501-0600
Florida, North & South Carolina 1-888-LINDER8 www.linder.com www.facebook.com/ linderindustrialmachinery
TRACTOR & EQUIPMENT COMPANY
Alabama, Florida (Panhandle) & Georgia 205-591-2131 www.tec1943.com
Kentucky, Indiana & Tennessee 877-538-3221 www.bramcomps.com
Page 56 • May 22, 2019 • www.constructionequipmentguide.com • Crushing, Screening & Recycling Section • Construction Equipment Guide
Peterson Pacific Introduces Smaller, Yet Powerful 1700D Horizontal Grinder
LARGE & SMALL EQUIPMENT DEALERS (The Beast, Whole Tree Chippers, Sawmill / Chipmill Chippers, Track Carriers, Brush Chippers, Stump Grinders, Skid Steer Attachments)
www.bobcatofstl.com
Bobcat of Clarksville 960 Alfred Thun Road Clarksville, TN 37040 931-436-9555
Bobcat of Nashville 149 Industrial Blvd La Vergne, TN 37086 615-941-4000
SMALL EQUIPMENT DEALERS (Brush Chippers, Stump Grinders, Skid Steer Attachments)
www.actconstructionequipment.com
ACT Construction Equipment The Peterson 1700D horizontal grinder processing wood scrap.
Peterson Pacific Corp., a manufacturer of wood grinding and chipping machines, introduced the new Peterson 1700D horizontal grinder. “The new-1700D is smaller and lighter than our other grinders, but still packs impressive performance. The 1700D is ideal for small mulch, compost or pallet grinding operations, as well as municipalities looking for a smaller machine, but still needing excellent throughput for a grinder of this size,” said Jody Volner, president of Peterson Pacific Corp. “We are excited about the capabilities of this remarkable grinder, and have it loaded with the features that Peterson customers have come to expect from our products.” Heavy duty and mobile, the The 1700D is ideal for small mulch, compost or pallet grinding operations, 1700D can readily reduce a wide as well as municipalities looking for a smaller machine, but still needing range of materials. The 1700D’s excellent throughput for a grinder of this size, according to Jody Volner, large feed opening measures 54 by president of Peterson Pacific Corp. 27 in. (137 by 69 cm). When boosted by Peterson’s high-lift feed roll, the feed opening’s maxi- The 1700D also features Peterson’s impact release system to mum lift of 41.5 in. (105 cm) can tackle the largest of feed- protect the machine against ungrindable materials, a feature stock and allows excellent accessibility to the rotor for main- unique to Peterson horizontal grinders. The 1700D horizontal grinder features a quick-change tenance, according to the manufacturer. The 1700D horizontal grinder is equipped with a multiple grate system, making it easy to customize grate conCaterpillar Tier IV C9.3 455 hp (433 kW) engine, or an figurations. Grates are removed through an easy-access door optional, export-only C9 Tier III, 350 hp (261 kW) engine. on the side wall. With Peterson’s up-turn rotor, heavy-duty At 41,000 lbs. (18,597 kg), it is the lightest of Peterson’s bits and robust anvil, the 1700D has an exceptional wear life and accurate product sizing, according to the manufacturer. grinder series and is easily transportable. The Peterson 1700D horizontal grinder also is Peterson+ Peterson’s adaptive control system, featuring a fully adjustable feed system, is optimized for a wide range of enabled — a new remote monitoring solution providing materials. The 1700D control panel features a large display machine owners access to real-time and historical data of that provides the operator with complete engine and system their machine’s performance and location. For more information, visit www.petersoncorp.com. parameters to simplify set up and efficiently operate the unit.
Winston-Salem, NC 888-636-7344 Charlotte, NC 888-636-7344 Wilmington, NC 888-636-7344
www.acesalesandrentals.com
Atlantic Coastal Equipment, LLC 922 Longwood Drive Richmond Hill, GA 31324 912-459-1155
www.masontractor.com
Mason Tractor Company 5038 Buford Hwy. Norcross, GA 30071 770-582-0377 Blue Ridge, GA 706-632-3777 Cumming, GA 770-887-6119 McDonough, GA 770-957-3370
www.southlandmachinery.com
Southland Machinery 8920 Weaver Avenue Leeds, AL 35094 205-699-2699
155 Liberty Road Villa Rica, GA 30180 678-952-6802
Construction Equipment Guide • Crushing, Screening & Recycling Section • www.constructionequipmentguide.com • May 22, 2019 • Page 57
6750 Millbrook Rd. • Remus, MI 49340 • 1-800-952-0178 FIND US ONLINE WWW.BANDITCHIPPERS.COM .
Bandit Buuilds More Thaan Machines. Machines .. Bandit Industries has based b its reputaation on a simplee truth – build them strong and stand behind our customers. And thaat’s what we’ve done ever very stepp of the wayy. Every Banndit® machine uses the highhest quality steel and is construucted by specialized teams to sttand up to the toughest jobs. Tha T at’s why more professionals trust a Bandit for their toughest jobs. And every machine is backked by unbeatable factory suppport and an extensive dealer network. twork.
LARGE EQUIPMENT DEALERS (The Beast, Whole Tree Chippers, Sawmill / Chipmill Chippers, Track Carriers)
When it comes to yourr business, Bandit Industries dooesn’t just build machines. See how Company Wrench Bandit can build your bottom line. Contact your local authorized Bandit dealer today or visit www.companywrench.com www.banditchippers.ccom to learn more! 3729 N Frontage Rd. 125 Wilsons Mills Rd Lakeland, FL 33810 813-754-5800
11301 Reames Rd. Charlotte, NC 28269 980-859-4680
Extension Smithfield, NC 27577 919-938-8145 141 Brickyard Rd. Lexington, SC 29072 803-520-0032
www.yanceybros.com
Yancey Bros. Co. 330 Lee Industrial Blvd., Austell, GA 30168 800-282-1562
Columbus • 800-633-5240 Dacula • 800-545-2945 Macon • 800-633-5180 McDonough • 888-926-2392 Albany • 800-768-2892 Savannah • 800-755-8382 Augusta • 800-446-5131 Statesboro • 888-764-6506 Bloomingdale • 800-482-1144 Valdosta • 800-755-6841 Brunswick • 800-299-5010 Washington • 888-678-3211 Calhoun • 800-752-9804 Waycross • 888-948-2443
Page 58 • May 22, 2019 • www.constructionequipmentguide.com • Crushing, Screening & Recycling Section • Construction Equipment Guide
Metso Expands M&J Pre-Shredder Line for Waste Recycling Metso is expanding its waste recycling product range with the launch of the new Metso M&J K-series pre-shredders. The first two models will be M&J K160 and M&J K210. The new competitive models provide a low cost-per-ton with high reliability, ease of operation and great flexibility for various waste types and with a design optimized especially for sites with a 5 to 45 tons per hour production requirement. The new shredders come with the wide variety of proven knives developed by Metso to accommodate clients’ specific needs. With the open cutting table design, operators do not need to pre-sort the waste being loaded into the shredder; this translates to higher capacity with less manpower and fewer breakdowns. Due to tightening legislation for waste treatment, the demand for competitive pre-shredders is increasing around the world. One of the strongest growth markets is Asia, where the need for efficient waste management solutions is becoming more important. “Our customers have been asking for a wider range of competitive pre-shredders from Metso. By launching the new M&J K-series with one shredder replacing an existing shredder and the second shredder complementing the capacity range, we can cater to much wider requirements, and an even broader range of waste producers can benefit from the unique advantages that Metso can offer with the M&J shredders. The favorable price/performance ratio also will expedite sales to the Asian market, where there is a huge demand for reliable pre-shredders,” said Morten Kiil Rasmussen, commercial director, waste recycling, Metso.
Improved Capacity, Longer Lifetime, Lower Cost • The unique bi-directional shredding system (both synchronous and asynchronous) with two shafts provides superior performance with all waste, resulting in unbeatable uptime • The proven knives geometry reduces the risk of wrapping on the shafts, resulting in less bridging and fewer cleaning stops to improve capacity
M&J K160 is one of the first two models of the new Metso M&J K-series pre-shredders.
• The modularity ensures that only relevant components need to be maintained, ensuring a longer lifetime with lower operating costs • The M&J K-series pre-shredders have a robust and proven construction and are easy to access, making maintenance fast and service costs low Comprehensive Range of Waste Recycling Products The comprehensive M&J range of waste recycling products covers pre- and fine-shredding technologies and is supported by an extensive scope of service solutions and local support from Metso. In total, more than 800 Metso waste shredders are currently in operation globally, most of them in China, UK, Germany, France and Italy. Metso’s M&J pre-shredding technology for stationary and mobile plants is based on a powerful drive system, excellent knife design and an open cutting table. These features and other distinct technical advantages benefit customers who are looking for a robust high-capacity shredder for continuous use at a high run rate even with hard and abrasive materials, according to the manufacturer. Metso’s M&J fine-shredders handle a wide range of different materials and deliver a very stable and homogenous output with minimum fines that is extremely suitable for refuse derived fuel (RDF) production. With Metso’s M&J fine-shredders, customers can achieve a throughput of up to 28 tons per hour. The multi-edged shaft is fitted with a knife system and smart-engineering to reduce operating costs. For more information, visit www.metso.com.
Bandit Offers Extending Kesla Loaders With Remote Control Bandit now offers extending Kesla loaders with radio remote controls on its Intimidator 21XP hand-fed chippers, giving land-clearing professionals, tree care companies and right-of-way contractors a powerful all-in-one tool to dispose of limbs and even whole trees. “Rated as a 21 inch capacity chipper, the 21XP is the largest hand-fed chipper in Bandit’s fleet, so it’s built to chip heavy,
large-diameter trees. Those can be difficult to quickly get to the chipper, even with a winch,” said Bandit Sales Manager Jason Morey. “The Kesla loader option increases the productivity of this machine in virtually any application.” The Kesla loader can extend to 21 ft. (6.4 m) and grab large bundles of limbs, large individual limbs, and even downed whole trees. Using intuitive controls, the operator
The Kesla loader can extend to 21 ft. (6.4 m) and grab large bundles of limbs, large individual limbs, and even downed whole trees.
Rated as a 21-in. capacity chipper, the 21XP is the largest hand-fed chipper in Bandit’s fleet.
can guide the material quickly into the chipper to be processed in a fraction of the time it would take operators to winch. “This option can eliminate the need for additional workers on the ground, or additional equipment brought to the job site,” Morey said. When not in use, the Kesla loader folds up on the front of the chipper where it’s out of the way, never impeding the discharge chute, or limiting access to common maintenance items. With a rated chipping capacity of 21 in.
(53 cm), a huge 24.5- by 26-in. (62 by 66 cm) chipper throat opening, Bandit’s Slide Box Feed System and engine options up to 350 hp, the Intimidator 21XP is simply the ultimate hand-fed chipper. This machine has no problem processing large whole trees, and is designed for tree services specializing in large tree takedowns, land clearing operations, or any projects requiring the highest levels of production and performance. For more information, call 800/952-0178 or visit www.banditchippers.com.
Construction Equipment Guide • Crushing, Screening & Recycling Section • www.constructionequipmentguide.com • May 22, 2019 • Page 59
THE RIGHT MOBILE EQUIPMENT FOR YOUR OPERATION.
Designed with Maintenance in Mind Your ability to efficiently process materials on site depends on reliable equipment. KPI-JCI and Astec Mobile Screens design and manufacture a wide selection of mobile crushers, screens and conveyors designed with simplicity for easy operation and maintenance to keep you up and running. For unmatched customer support, our dedicated experts and distribution network will help you find a solution that fits your needs. Learn more at kpijci.com/track-mount
Stone Equipment Company, Inc. 210 West Blvd. Montgomery, AL 36108 844-786-6373
155 Liberty Rd. 1797-A Fulton Spring Rd. Villa Rica, GA 30180 Alabaster, AL 35007 844-786-6373 844-786-6373 www.stoneequipmentco.com
Highway Equipment Company 305 Executive Park Drive, Concord, NC 28025 980-781-4510 www.highway-equipment.com
Page 60 • May 22, 2019 • www.constructionequipmentguide.com • Crushing, Screening & Recycling Section • Construction Equipment Guide
Telsmith’s Portable Crusher Delivers a Crushing Advantage
The Telsmith 3244 portable plant provides the portable crushing producer consistent, reliable production, low mobilization costs and the flexibility in a number of processing applications such as producing quarried stone, sand and gravel, and recycling.
Telsmith Inc., manufacturer of mineral processing equipment, promoted its 3244 portable crushing plant at the 2019 AGG1 Expo in Indianapolis, Ind. The Telsmith 3244 portable plant provides the portable crushing producer consistent, reliable production, low mobilization costs and the flexibility in a number of processing applications such as producing quarried stone, sand and gravel, and recycling. The 3244 primary jaw plant can be used alone or configured with other mobile plants to create a complete processing system in aggregates processing. The 3244 unit begins with a 48-in. by 20-ft. vibrating grizzly feeder constructed with mild steel pan, 1/2-in. thick AR steel pan liners, 1/4-in. AR side liners, 6-ft. long straight deck AR steel grizzly bar sections and heavy-duty coil support springs with pads to support standard duty loader feeds. The vibrating grizzly feeder is powered by a premium electric motor that boasts an efficient 40 hp. In addition, the dual-shaft gear-driven vibrating unit offers adjustable counterweights, 140 mm flow through oil lubricated bearings, and grooved drive sheave to achieve maximum performance with minimal downtime. The 3244 offers throughput capacities from 175 to 265 stph through 325 to 530 stph and is part of the Telsmith line of Hydra-Jaw crushers. Hydra-Jaw crushers offer a toggle tensioning system which saves time and costs by eliminating the need to adjust springs when changing the setting. Quick to assemble and reliable in operation, the assembly requires no special tools or maintenance allowing for consistent reliable crushing. The core of the Telsmith hydraulic toggle system is the robust Hydra-Jaw hydraulic cylinder. Custom built specifi-
cally for the crushing environment, the cylinder incorporates a large piston for high crushing forces and an “oversized” rod for stability and strength. The unique bushing and seal are designed to hold up to the rigors of constant crushing in a dusty environment to deliver long service life with minimal maintenance. Telsmith engineers safety into every product. Following a power failure or emergency stop, Telsmith’s hydraulic chamber clearing system allows the crusher to start up in as little as 15 minutes. Through push button controls, hydraulics crush any stone that remains in the chamber preventing oversized material from passing onto the product belt. Your workers stay safe, no digging out the crusher or clearing off the belt, and the plant starts back up as if nothing had happened, according to the manufacturer. In addition, robust platforms offer diamond plate walkways around crusher, 4-in. toe boards, 42-in. handrails and access ladder allowing provide a safe working space when performing maintenance, startup and mobilization tasks. Startup is made simple allowing for operations to begin crusher within hours. To achieve this, Telsmith designed three simple user-friendly control panels, soft start, motor start and off-plant. The soft start UL certified NEMA4 panel consists of a main circuit breaker for the crusher motor soft start. The motor starter UL certified NEMA4 panel provides a main circuit breaker, motor starters for plant motors and 4 extra 20 hp motor starters for off-plant conveyors. The offplant panel support stand provides cord grips and 50 ft. wiring from starter panels to on-plant junction box. Telsmith’s TRAC10 Automation feature comes standard on all portable plants.
TRAC10 monitors crusher operations, provides automated calibration and setting controls and protects the crusher from overload; all to yield greater crushing performance and efficiency. Operators can initiate an automated calibration process via the touch screen monitor, that automatically “zero’s-out” and resets to the proper setting. Operators also can modify the crusher setting at any time, even while crushing. Telsmith engineered and manufactured chassis provide ease of mobility and strength to handle the vibrations of many crushing applications. The 3244 chassis is built to last with 24- by 55-in. WF main beams, fifth wheel plate, equipment supports and cribbing legs that are easily adjusted for quick setup and mobilization. Telsmith offers chassis compliant with all 50 states onhighway regulations. The 3244 standard chassis includes quad axles and highway towing kit with 25,000 lb. axles, air brakes, walking beam axle support, (16) 11R22.5 tires, mud flaps and lights with reflectors. Total transport weight and dimensions for the standard configuration are 112,000 lbs. and 41ft. 2 in. by 10 ft. 7 in. by 13 ft. 5 in. Telsmith Inc. provides a full range of minerals processing solutions to the aggregate, mining, industrial, and recycling industries with cone crushers, jaw crushers, vibrating equipment, portable plants, track plants, as well as full-scale modular processing facilities. Solutions from Telsmith include product lifecycle support with parts availability and factory trained service technicians. For more information about Telsmith and portable crushers, call 262/242-6600 or visit www.telsmith.com.
SECTION
Attachments Pages 61-64
For more information about these attachments and more, visit our Attachments Section on our Web site at www.constructionequipmentguide.com
Volvo Tooth System Gives Buckets Something to Chew On Aimed at Volvo’s larger excavators and wheel loaders, the new generation Volvo Tooth System features higher penetration, longer life — and an easy “hammer-less” fitting system. Volvo Construction Equipment’s medium and large wheel loaders and excavators now have more to smile about — an all new premium tooth system that not only increases productivity and fuel efficiency, but also is more wear resistant and much easier to fit, due to its hammer-less pin design. Offered for Volvo wheel loaders between L60 to L350, and for Volvo excavators from 15.4 ton (14 t) capacity up to its largest 104.7 ton (95 t) machine, the new tooth system digs deeper and stays sharper for longer. The low profile design offers greater penetration capability and higher bucket fills, offering quicker cycle times and as much as an extra 20 percent more penetration over the life of the tooth — boosting productivity and extending effective tooth life. The design also features a more selfsharpening design, further helping to reduce fuel consumption.
according to the manufacture. A true hammer-less system, the teeth feature a new locking system that has a reusable locking pin. Offering excellent fit and retention — and an auto-tightening effect once fitted, the reusable pin locks into place simply by twisting it a quarter turn. Taking just a few minutes, installation couldn’t be simpler — place, push and twist — that’s it.
The teeth and adaptors are specifically matched to the specification, size and model of machine.
Fitting Geometry Protected welding, stronger adaptor nose and clever design helps give the system added robustness, while the system’s greater durability means longer change intervals and reduced bucket wear. Because they are designed exclunew tooth system has a longer life sively for these Volvo machines, the Volvo’s and higher penetration. teeth and adaptors are specifically matched to the specification, size and model of machine. The Right Tooth for the Task Featuring smooth surfaces in critical areas, There are five types of tooth available for the new tooth system helps to distribute stress the excavators: general purpose, abrasive while working. With the optimum balance of material and rock, pick point, twin pick and wear protection and weight, the tooth system spade nose. There are two adaptor types has been engineered to unlock the potential of offered, and also an optional mechanical these machines — delivering maximum per- wear cap available, which fits on the stanformance, breakout force and uptime. dard adaptor and extends tooth life further. For wheel loaders there are three types of Place. Push. Twist. tooth available — general purpose, abraThe ultimate in wear parts, even the best sive material and rock, along with three teeth need to be replaced eventually, but types of adaptor. changing teeth with Volvo’s new generation For more information, visit tooth system couldn’t be easier — or faster, www.volvoce.com. The new tooth system helps to distribute stress while working.
Page 62 • May 22, 2019 • www.constructionequipmentguide.com • Attachment & Parts Section • Construction Equipment Guide
Utility Forks...
Pemberton Offers Manual Tine Adjustment Feature
USED D PAR A TS T FROM THO OMPSON MACHINERY HINERY Used Caterpillar® parts from Thompson offer a greatt value for replacing or repairing industrial heavy machinery. And because the part is made by Caterpillarr,, you’ll know w you’re getting a reliable product that won won’t let you doown when you need it most. most
• Used Parts and Attachments Cat cabs, OROPS, bucketss, more • Used, Rebuilt, and Exchange Components Final drive paarts, pumps, differentials, more If we don’t have your part in stock, we can locate it with w our nationwide Parts Locator • Network. We also buy used and salvage equipment.
Call us at 615.259.5820
Check out our inventory online at www.TMCat.com/up
E-mail us at usedparts@TMCat.com
THOMPSON MACHINERY Y
Pemberton Attachments’ BAC-SAVR manual tine adjustment feature for construction utility forks allows an operator to manually adjust the width of their tines with minimal time and effort. Fast, safe and easy, the BACSAVR adjustment feature will help reduce onsite injuries while saving time on the job site, according to the manufacturer. For more information, call 800/393-6688 or to see the video visit https://youtu.be/TTPXUVfbWNQ.
All Makes Undercarriage Parts Also Carry Bucket Teeth and Cutting Edges Caterpillar® John Deere® Komatsu® Case® Hitachi® Liebherr® Volvo® Kobelco® Kubota® Bobcat® Takeuchi®
Call For a
FREE ESTIMATE!
DISASTERS DON’ T
PL AN AHEAD
YO U C AN
Tractor Tracs Inc.
DON’T WAIT. COMMUNICATE.
Undercarriage Specialists
VISIT READY.GOV/PLAN.
5505 Caterpillar Drive, Apex, NC 27539
919-387-1050 • 888-526-9740 • www.tractortracs.com
Talk to your loved ones about how you are going to be ready in an emergency.
Construction Equipment Guide • Attachment & Parts Section • www.constructionequipmentguide.com • May 22, 2019 • Page 63
THIS MONTH’S SPECIALS 2082500022 - Two turntable bearings for a Komatsu PC400-3. Avon# 2055B3................................................................................$7,175 Each 2072500022 - Two turntable bearings for a Komatsu PC300-3. Avon# 1555B3................................................................................$4,475 Each 2052500021 - Two turntable bearings for a Komatsu PC200-3. Avon# 1148B4................................................................................$3,450 Each 24100N418F1 - One turntable bearing for a Kobelco 909. Avon# 1551B9................................................................................................ $2,075 21400N3354F2P1 - One turntable bearing for a Kobelco 907C or K907C. Avon# 1447B2...................................................................... $4,850 KBB0282 / D28001 - One Link-Belt turntable bearing for a LS3400C. Avon# 1249B5.............................................................................. $3,950 TH103075 - One John Deere turntable bearing for model 792. Avon# 1556B8........................................................................................ $3,500 TH108810 or AT190766 - One John Deere turntable bearing model 490D and 495D. Avon# 1143B9.................................................... $1,100
Mobro Marine Sells CRANE PARTS You will find the parts you need at MOBRO Marine, Inc. We purchase in bulk directly from the manufacturers to maintain our large inventory. We also have a large inventory of long-lead time parts for cranes that can’t be found anywhere else. Not only does this mean we have the part you need in stock, it also saves you money. Because we buy in volume, we can buy for less and pass the savings on to you. Our large inventory keeps construction equipment performing at optimum levels. We offer same-day shipping on most parts - you’ll experience minimal downtime. We are a full-service company. We not only supply parts, but we also service and repair construction equipment and cranes of any type.
We sell high quality genuine OEM parts from the following manufacturers: • Terex • American • Bucyrus-Erie • P&H • Kobelco • Koehring • Lorain • Northwest Crane
MOBRO MARINE, INC. Please Contact Billy Harper or Tony Cruz at 904-733-1822 Hablamos Español
www.mobromarine.com/parts/php
Page 64 • May 22, 2019 • www.constructionequipmentguide.com • Attachment & Parts Section • Construction Equipment Guide
Vacuworx SL 2 System Goes Modular Vacuworx has introduced the next generation of its SL 2 subcompact vacuum lifting system. Originally launched in 2016, the SL 2 was the first compact equipment attachment in the company’s growing lineup of products for the concrete construction industry. The vacuum lifter has revolutionized the way saw cut concrete can be handled on job sites, saving man hours, promoting safety and reducing debris, according to the manufacturer. Now, the lightweight system has been updated with an improved hydraulic system and modular pads to work with more machines and for more applications. Customer Feedback Drives Innovation Concrete construction and demolition contractors have been quick to recognize the advantages of using the SL 2 to overcome common jobsite restrictions such as loud noise, debris and vibration. While the original integrated pad was designed to work for most common applications, contractors continue to identify more opportunities to put the system to work and have requested additional pad sizes for even greater versatility. The SL 2 now features a base unit — available with manual or wireless remote control — with modular pad options. The standard 24 by 24 in. (61 by 61 cm) pad is still available, along with a 12 by 36 in. (30.5 by 91 cm) pad for handling more narrow trench cuts, as well as other sizes upon request. All system components are fabricated from high quality aluminum to maximize overall lifting capacity with the host machine. The base unit and pad together weight approximately 100 lb. (45 kg)
In addition, the updated SL 2 features a redesigned hydraulic system. Vacuworx recommends operating the attachment on host equipment with a case drain. However, the company recognizes that some machines, such as miniexcavators and older skid steer models, may not come equipped with a case drain so Vacuworx engineered an innovative hydraulic design to allow contractors to be able to use the SL 2 with the equipment they already have. But If It Isn’t Broke... What hasn’t changed is the design that delivers a lifting capacity up to 2,700 lb. (1,224.7 kg) and features quick-connect hydraulic hoses and a factory pre-set flow control valve to ensure optimal performance. There are two mounting assembly options depending on the host machine: mini/walk-behind subcompact equipment or standard skid steer-type machines. The SL 2 also is compatible with small excavators, backhoes and cranes using the clevis hook connection. The SL 2 operates using the auxiliary hydraulics from the host machine (minimum 10 gpm required with maximum 3,000 psi). The vacuum pump maintains a constant vacuum in the pressure reservoir. When activated, the system pulls a vacuum between the vacuum pad and the object to be lifted, providing a powerful positive seal. Vacuworx Tough Seal pad seal is used on the vacuum pad to cover the material to be lifted and create the necessary suction. The vacuum seal holds until the operator activates the release (even in the event of a power failure).
The SL 2 now features a base unit — available with manual or wireless remote control — with modular pad options. The standard 24 by 24 in. (61 by 61 cm) pad is still available, along with a 12 by 36 in. (30.5 by 91 cm) pad for handling more narrow trench cuts, as well as other sizes upon request.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 22, 2019 • Page 65
DO MOREE WITH A SINGLE MACHINE Most excavators can only do one thing at a time – trravel, lift or swing. With our exclusive independent travel feature, KOBELCO excavator t s can do all three. Advanced hydraulic circuitry keeps the right amount of power going to the right places, kg qgm [Yf lY[cd] ]n]f l`] egkl [gehda[Yl]\ lYkck egj] ]^Ú[a]fldq Yf\ kY^]dq l`Yf ]n]j Z]^gj]& Hdmk$ `q\jYmda[ Ûgo k]llaf_k ^gj mh lg )0 \a^^]j]fl YllY[`e]flk [Yf Z] Y\bmkl]\ ja_`l ^jge l`] [YZ$ kg koal[`af_ Z]lo]]f lYkck lYc]k gfdq eafml]k& L`] f]pl lae] qgm j] YZgml lg ljYfkhgjl emdlahd] eY[`af]k lg l`] bgZkal]$ [gfka\]j k]f\af_ bmkl gf] CG:=D;G lg lYc] [Yj] g^ Zmkaf]kk&
KOBELCO-USA.COM/EXCAVA VATORS
18-KOBELCO 18 KOBELCO-1235 1235_C CEG EG-C Co o-Op Op p_P PowerAd ow werA Ad d_RUN RUN.indd ind dd 1
www.ScottCompanies.com Alexandria, LA 318-448-1647 Shreveport, LA 318-226-9696 Monroe, LA 318-388-9300 Little Rock, AR 501-455-5955
Ft.Smith, AR 479-648-1600 Springdale, AR 479-751-4242 Texarkana, AR 870-772-0204
7 11//18 7/11/18 8 3:17 PM
www.companywrench.com Memphis, TN 901-547-8008 LaVergne, TN 615-793-3888 Jackson, MS 601-373-4600
125 Wilson Mills Rd. Extension Smithfield, NC 27577 855-562-3526 141 Brickyard Rd. Lexington, SC 29072 866-262-4181 803-520-0032
11301 Reames Rd. Charlotte, NC 28269 980-859-4680 6325 Central Avenue Pike Knoxville, TN 37912 865-766-2571
www.gsequipment.net Tampa, FL 866-586-8956 Pompano Beach, FL 954-327-8808 Ft. Myers, FL 239-334-6063
Tallahassee, FL 850-574-0892 Orlando, FL 407-859-9160 Jacksonville, FL 904-268-4400
www.highway-equipment.com 8071 Lee Highway Troutville, VA 24175 540-992-4650
Page 66 • May 22, 2019 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Officials: Miami-Dade Road Improvement Project Has Been in the Works Since 1999 KROME from page 45
include Ryan Southern for earthwork and drainage on half of the project; Roadway Construction and American Pipeline for drainage; Arazoza Brothers for landscaping; Bob’s Barricades and Acme Barricades for MOT devices; Guaranteed Fence for guardrail and fencing; Maytin Engineering for clearing and grubbing and demolition; Redland Company for limerock finishing; Under Power for lighting and signalization; Road Runner for striping; and Construct Group Corp for bridge construction. “A lot of thought went into putting our team together,” Halley said. “It was important that our subs understand and were on board with the goal of quickly completing a quality project. We are fortunate to have existing relationships with many of the subs and are forging new ones through this project.” Materials expected to be utilized in construction include 3,500 cu. yds. of concrete, 100 tons of steel, 73,000 tons of asphalt, and 150,000 cu. yds. of earth and rock. The equipment HEC will utilize on the project will include Manitowoc 3900W and Grove RT875C cranes; Komatsu PC300LC, Kobelco SK210LC, Cat M318C, Komatsu PC400LC and Volvo EC150 excavators; John Deere 750J LGP and Cat D5K dozers; Cat 980H, 256C and 262C loaders; Hamm HD14VV, Wacker RD11A, Ingersoll SD100 TF, Hamm 2420D, Volvo SD100D, and Cat CB-
534D XW rollers; and two CAT AP1055Ds pavers. “The majority of the issues we have with equipment include blown tires, broken hoses and broken teeth on buckets, which are very minor,” said Yaser Sosa, HEC’s project manager. “Equipment is checked before and after each use to identify any issues or potential issues. HEC has mechanics that come in and out of the project daily to service equipment to prevent major breakdowns from lack of maintenance. These daily inspections are critical to prevent any delays on such a fast-paced project.” HEC purchases and rents equipment from dealerships such as Ritchie Bros., Kelly Tractor, Dobbs Equipment, Meco Miami and Flagler Construction Equipment. “HEC keeps a close relationship with its equipment dealers,” said Halley. “We speak on a weekly basis regarding equipment performance, maintenance and repairs. This constant communication builds trust and allows for issues to be resolved in the most efficient manner.” The next phase of the Krome Avenue enhancements is expected to start in late 2019 and to be completed in mid2022. The work area will cover Krome Avenue from Southwest 236th Street to Southwest 312th Street. A contractor for this segment will be selected this spring. “Everyone is coming together and putting in the work,” said Jonathan Fundora, FDOT’s project manager. “This project brings a safer Krome Avenue to the community, and that is the department’s ultimate goal.” CEG
U.S. Secretary of Energy Rick Perry Attends Laboratory Groundbreaking in Tennessee LAB from page 1
million, the TRC, located in the central ORNL campus, will accommodate sensitive equipment, multipurpose labs, heavy equipment and inert environment labs. Approximately 75 percent of the facility will contain large, modularly planned and open laboratory areas with the rest as office and support spaces. “This research and development space will advance and support the multidisciplinary mission needs of the nation’s advanced computing, materials research, fusion science and physics programs,” ORNL Director Thomas Zacharia said. “The new building represents a renaissance in the way we carry out research allowing more flexible alignment of our research activities to the needs of frontier research.” The flexible space will support the lab’s growing fundamental materials research to advance future quantum information science and computing systems. The modern facility will provide atomic fabrication and materials
characterization capabilities to accelerate the development of novel quantum computing devices. Researchers also will use the facility to pursue advances in quantum modeling and simulation, leveraging a co-design approach to develop algorithms along with prototype quantum systems. The new laboratories will provide noise isolation, electromagnetic shielding and low vibration environments required for multidisciplinary research in quantum information science as well as materials development and performance testing for fusion energy applications. The co-location of the flexible, modular spaces will enhance collaboration among projects. At approximately 100,000 square ft., the TRC will be similar in size and appearance to another modern ORNL research facility, the Chemical and Materials Sciences Building, which was completed in 2011 and is located nearby. The facility’s design and location also will conform to sustainable building practices with an eye toward
encouraging collaboration among researchers. The TRC will be centrally located in the ORNL main campus area on a brownfield tract that was formerly occupied by one of the laboratory’s earliest, Manhattan Project-era structures. ORNL began a modernization campaign shortly after UT-Battelle arrived in 2000 to manage the national laboratory. The new construction has enabled the laboratory to meet growing space and infrastructure requirements for rapidly advancing fields such as scientific computing while vacating legacy spaces with inherent high operating costs, inflexible infrastructure and legacy waste issues. The construction is supported by the Science Laboratory Infrastructure program of the DOE Office of Science. ORNL is managed by UT-Battelle for the Department of Energy’s Office of Science, the single largest supporter of basic research in the physical sciences in the United States. For more information, visit http://science.energy.gov.
GO WITH KOMATSU... AND GET THE ONLY TIER 4 EQUIPMENT WITH COMPLIMENTARY MAINTENANCE BUILT RIGHT IN. Every Komatsu Tier 4 construction machine comes standard with Komatsu CARE complimentary factory scheduled maintenance for 2,000 hours or the first 3 years, plus 2 complimentary Komatsu Diesel Particulate Filter exchanges. With Komatsu CARE you can: • Lower your cost of ownership • Increase equipment uptime and reliability • Protect the value of your Tier 4 capital investment It’s just part of our Program designed to deliver complete service and support solutions to Komatsu customers. To learn more about Komatsu CARE contact your Komatsu distributor or scan this QR code with your smart phone.
SOUTHEAST KOMATSU DISTRIBUTORS
H&E Equipment Services www.he-equipment.com AR Little Rock 501-568-7867 800-632-0577 Springdale 479-927-1672 888-200-6343 LA Alexandria 318-443-7173 800-249-8485 Baton Rouge 225-356-6113 800-872-1305 Bossier City 318-746-5272 800-643-2844 Broussard 337-837-9600 877-463-9914 Kenner 504-467-5906 800-203-1869 Sulphur 337-528-2661 800-258-1614
Linder Industrial Machinery www.linder.com FL Ft. Myers 239-337-1313 Jacksonville 904-786-6710 Ocala 352-629-7585 Orlando 407-849-6560 Pembroke Pines 954-433-2800 Plant City 813-754-2727 West Palm Beach 561-863-0570 NC Arden 828-681-5172 Aurora 919-628-2210 Charlotte 704-376-7554 Greenville 252-695-6200 Greensboro 336-665-0110 Raleigh 919-851-2030 Wilmington 910-254-2031
SC Greer 864-877-8962 North Charleston 843-552-0095 West Columbia 803-794-6150
Lyle Machinery Co. www.lylemachinery.com MS Columbus 662-243-2152 Hattiesburg 601-296-7556 Jackson 601-939-4000 Magnolia 601-783-2111 Saucier 228-832-7575
Power Equipment www.powerequipco.com MS Saltillo 662-869-0283 TN Chattanooga 423-894-1870 Kingsport 423-349-6111 Knoxville 865-577-5563 LaVergne 615-213-0900 Memphis 901-346-9800
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 22, 2019 • Page 67
Rish Equipment Company www.rish.com MD Frostburg 301-689-2211 VA Bealton 540-439-0668 Chesapeake 757-485-2100 Chester 804-748-6411 Coeburn 276-395-6901 Fisherville 540-887-8291 Salem 540-380-2090 WV Beckley 304-255-4111 Bluefield 304-327-5124 Bridgeport 304-842-3511 Logan 304-752-9313 St. Albans 304-755-3311
Tractor & Equipment Company www.tec1943.com AL Alabaster 205-621-2489 Anniston 256-831-2440 Birmingham 205-591-2131 Decatur 256-355-0305 800-321-6865 Dothan 334-678-1832 Huntsville 256-851-2222 Mobile 251-457-8991 800-233-7213 Montgomery 334-288-6580 800-832-9563 Tuscaloosa 205-752-0621 FL Panama City 850-763-4654 Pensacola 850-505-0550 GA Albany 229-435-0982 800-733-0962 Augusta 706-798-7777 800-659-3090 Calhoun 706-879-6200 800-827-3072 Columbus 706-562-1801 877-307-6439 Forest Park 404-366-0693 Hoschton 706-654-9850 888-334-9850 Kennesaw 678-354-5533 Macon 478-745-6891 Savannah 912-330-7500 800-827-1405
“WE’RE NO OT A BIG COMP OMPANY A , BUT KOM MAT TSU TREA AT TS US LIK KE WE ARE.” BETTER SUPPORT S . “My cousin Thomas and I started our construction company on a wing and a prayer. We couldn’t have done it without the financing, training, ning, tech assistance and support we received from Komatsu and d our distributor. The products are top quality. They make us efficientt at our job, and feel connected—like they want to be our partner in this. That’s why Komatsu works for or us!”
Brian (left) and Thomas Cronin / Prosperity Construction onstruction / Jackson, MS
That t’s why I am Komatsu t komatssuamerica.com
© 2018 Komatsu America Corp. All Rights Reserved 033
Page 68 • May 22, 2019 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
T RA C K L OA A DER S
•
SKI D LOAD DERS
•
ARTICULA TE ED LOADERS
•
EXC C AV VA A TORS
•
TELEHANDLERS ANDLERS
RT215 PILOT CONTROL TRACK LOADER
The RT215 Pilot Series TTrrack Loader from Gehl is thhe IDEAL machine. Outfitted with our revolutionary p operated control system, the Pilot Series has pilot the ideal mix of simplicity and technology. The seat mounted joystick controls move with the operator, even on rough terrain, and provide additional legroom. The Pilot Series TTrrack Loader line includes five models ranging from 1,650 lbs. to 3,200 , lbs. rated oper p atingg capacity p y.
TTest est drive the Gehl R RTT Pilot Series Track Loaders at your locall Gehl dealership today!
INDUST IN NDUSTRY EXCLUSIVES S Ca b t o Ca no py Fold-u p Doo r Syst e m
Aut o m at ic Trac k Te nsio n Syst e m
DON ALLISON EQUIPMENT, INC. www.donallisonequipment.com 233 Melville Road, Arley, AL 35541 800-669-6450 • 205-387-1600
MAY • RHI www.mayequip.com Lexington, NC • 866-629-3784 Raleigh, NC • 866-629-3784 Charleston, SC • 866-629-3784 Columbia, SC • 866-629-3784 Greenville, SC • 866-629-3784
www ww.gehl.com/Pilo otApproved A
RICHMOND MACHINERY & EQUIPMENT COMPANY www.richmondmachinery.com 1701 Roseneath Road Richmond, VA 23230 804-359-4048
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 22, 2019 • Page 69
GET A HAND DLE ON OPERAT ATING COSTS Penn Jersey Machinery
Terex® Fuchs Material Handlers
Purpose-built for your scrap yard, transfer station or mill yard, Terex® ere Fuchs material handlers help you get a handle on your business with:
Deptford, NJ 856-227-6400
Frenchtown, NJ 908-824-4200
Chadwick-Baross Chelmsford, MA 800-804-0775 Bangor, ME 800-698-4838
Company Wrench
An average 11% reduced fuel consumption versus competitive material handlers
Lionville, P PA A Caribou, ME www.companywrench.com 610-363-9200 800-270-2547
An average 45% lower cost of ownership at 1000 hrs versus s compettiti itive material handl dlers
3729 N FrontageW Road Staten Island, NY Westbrook, estbrook, M ME Lakeland, FL 33810 718-4 718 448 48-24 2444 44 800-262-5 800 262-5714 714
The Tere e x Fuchs Tel e ematics System for real time fleet and equipment metrics to manage it all Plus you can always rely on your local Terex Fuchs distributor to keep your material handlers operating at peak efficiency, with Tere e x certified parts and trained service technicians. For more information on Terex Fuchs material handlers, contact your local Terex Fuchs distributor or visit us at terex.com/construc ction
863-937-6829
Concord, N H
11301 Reames6Road 03-224-4063 Charlotte, NC 28269 Edward Ehrbar 980-859-4680
Yonk o ers, NY 91 4-73Ext 8-5100 125 Wilsons Mills Road
Inc.
Smithfield, NC 27577 Holbrook, NY 919-938-8145 631-563-7600
141 Brickyard New RoadYo ork City, NY Lexington, SC 29072 718-626-3331 803-520-0032 Danbury, CT 203-743-0088
© 2014 Te erex Construction. Terex, the Terex e Crown design, Te erex Fuchs and Wo orks For You o are trademarks of Te erex Corporation on or its subsidiaries.
Page 70 • May 22, 2019 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Company Marks Century of Innovation BULLARD from page 8
Hard
designed an original supplied air boiled hat respirator for workers responsible for blasting the steelwork prior to the application of the bridge’s International Orange paint. Bullard went on to design innovative suppliedair respiratory protection solutions for such key industries as pharma1933 ribbed fire helmet ceutical manufacturing and automotive refinishing. The company continued to innovate the hard hat through the decades. In 1938, Bullard designed and manuConstruction factured the first aluhealth, safety and environminum hard hat, which was considered very 1936 blasting helmet mental director Joaquin Diaz, he attributes the durable and reasonably long-lasting relationship with Bullard lightweight for the time. “Even today, a few clients still have to his company’s commitment to protheir 25-year-old aluminum hard hat,” viding quality safety products that proBullard said. “These hats have one seri- tect the company’s employees. “Daily, head injuries are prevented ous drawback, aluminum is a great through our 100 percent hard hat policonductor of electricity.” Bullard’s distinctive three-ribbed, cy,” Diaz said. “Relationships don't last heat resistant fiberglass hard hat was long if trust isn’t part of it. We trust developed in the 1940s. In the 1950s Bullard to produce equipment designed and 1960s, thermoplastics replaced to best protect our employees. In 50 fiberglass. In 1982, the standard hard years, there is no doubt about the prodhat changed again with the incorpora- ucts and the people presenting these tion of a non-slip ratchet suspension products to us. “Bullard has a long history in the with a knob in the back for simple sizbusiness. The Bullard people make the ing. The hard hat today is known in the company and our interactions with industry as the “Classic or Standard” them positive,” Diaz added. “We enjoy and is produced from polyethylene the product. The three ribs hard hat plastic making it lightweight, durable, design is a fixture and is recognized by easy to mold and non-conductive to many in our industry.” As Wells Bullard leads her fifth-genelectricity. Enhanced with an upgraded suspension system, the Classic incor- eration business into the future, she porates easy-lock snaps for simple said she understands how rare it is to installation, easy height adjustment, an have a business achieve that type of enhanced brow pad and is available in longevity. “I would say it’s because my family cap or full-brim styles. The Vented model fosters more airflow inside the has had a really deep commitment for hard hat, keeping the user cool and remaining independent. We believe comfortable while providing quality that’s what’s best for our employees, customers, channel partners, and supprotection. One happy customer has been using pliers because it allows us to have a the Bullard brand for half of the exis- really long-term focus,” Bullard said. tence of the hard hat. Hawaiian “In the safety industry, thinking about Dredging Construction Company and the long-term effects of our products on its 1,000 employees have been in busi- the workers whom we are protecting is ness for 117 years and have built many very valuable. We are constantly evolvof the landmark projects in Hawaii. ing. We became an international comThey are Hawaii's largest general con- pany in the mid-‘90s. We continue to expand our international presence tractor. According to Hawaiian Dredging today and are really focused on innova-
tion and technology and integrating technology into our products. It’s a different company at every generation, I would say.” Bullard also is a leading manufacturer of other personal protective equipment and systems that are marketed worldwide, including thermal imagers, firefighter and rescue helmets, supplied air respirators, powered air-purifying respirators, and air quality equipment. “We’ve been very successful for more than 121 years by really watching, carefully observing, and then closely listening to our customers and learning what needs they have. Very often, it’s unspoken needs. Customers tell you things that they need, and sometimes it’s what they don’t specifically ask for that they really need,” Bullard said. “Our engineers and staff can think about that and leverage that into a better solution. We’re going to continue to listen to our customers and watch them work so we can learn. The Bullard I see in the future is one that builds on our strong brand, legacy, safety and our close relationship with our end-users. If we stay focused on what’s important to us, we’ll be positioned to deliver technology in ways that will truly better solve our customers’ problems.” The company even has its own fan club. The Turtle Club honors men and women who escaped injury because they were wearing hard hats at the time of industrial accidents. It is a participatory program for workers that has proven to be a valuable adjunct to traditional industry head protection safety efforts. The Turtle Club was founded to help increase safety on industrial job sites by encouraging the use of hard hats and was founded in 1946 by C. R. “Rusty” Rustemeyer, safety director at Canadian Forest Products Ltd. In 1950, Edward W. Bullard Sr., was appointed the Turtle Club sponsor. This appointment was particularly appropriate since, in 1919, it was this same man who invented the hard hat. Today the club’s international sponsor is E. D. “Jed” Bullard, grandson of E. W. Bullard. Because of Jed Bullard’s commitment and efforts, interest in the club see BULLARD page 76
BROOKS SALES, INC. 3144 Hwy 74 East • Monroe, NC 28112 704-233-4242 www.brookssales.com
CHARLOTTE TRACTOR 1700 Starita Road • Charlotte, NC 28206 704-596-8900 www.charlottetractor.com
COASTAL EQUIPMENT SYSTEMS 5287 New Kings Road • Jacksonville, FL 32209 904-924-9624 www.coastalequipmentsystem.com
CREEL TRACTOR CO. 3771 Palm Beach Blvd. • Fort Myers, FL 33916 239-694-2185 Fax: 239-694-6059 www.creeltractor.com
CROSBY EQUIPMENT COMPANY, INC. 1826 South Peterson Ave. • Douglas, GA 31535 915-384-4664 www.crosbyequipimentco.com
RJV KUBOTA Nashville 140 Charter Place • LaVergne, TN 37086 615-793-7576 Knoxville 3356 Rudy Street • Knoxville, TN 37921 865-970-2840 www.rjvequipment.com
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 22, 2019 • Page 71
IT MAY BE COMPACT, BUT ITS REACH IS WORLDWIDE.
Step into a Kubota excavator and it’s easy to see why it earned the title of #1 selling compact excavator in the world*. Six heating and cooling vents and an easy-open front window provide the kind of comfort that keeps operators in the cab and getting the work done. Minimum tail swing, industry-leading bucket breakout force and an optional quick coupler are just some of the additional features that give the Kubota compact excavator such a huge reputation.
0
$
DOWN
0.99
%
FOR UP TO
APR
60
GROWERS EQUIPMENT CO.
MASON TRACTOR COMPANY
www.growersequipment.com 2695 Davie Road 8333 Southern Blvd. Davie, FL 33314 West Palm Beach, FL 954-916-1020 33411 561-965-0100 8013 NW 66th Street Miami, FL 33166 305-592-7891
www.masontractor.com 395 Industrial Blvd. 1050 Appalachian Hwy McDonough, GA 30253 Blue Ridge, GA 30513 770-957-3370 706-632-3777 2510 Dahlonega Hwy Cummings, GA 30040 770-887-6119
5038 Buford Hwy. Norcross, GA 30071 770-582-0377
KubotaUSA.com *According to 2016 OEM Off-Highway Research, Kubota has the largest compact excavator market share in the world. **$0 Down, 0.99% A.P.R. financing for up to 60 months on purchases of select new Kubota KX, U series equipment from participating dealers’ in-stock inventory is available to qualified purchasers through Kubota Credit Corporation, U.S.A.; subject to credit approval. Some exceptions apply. Example: 60 monthly payments of $17.09 per $1,000 financed. Offer expires 6/30/19. See us or go to KubotaUSA.com for more information.**$0 Same convention as above Down, 0.99% A.P.R. fi for the series. © Kubota Tractor Corporation, 2019.
MONTHS**
RICHARDS TRACTOR AND IMPLEMENTS www.ritrac.com 1995 N.E. 8th St. Homestead, FL 33033 305-247-8711
Page 72 • May 22, 2019 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
DOOSAN. AN POWERFUL W SOLUTIONS. UTIONS At Doosan, we do more than engineer products. We engineer solutions. Robust compressors that weather her the harshest conditions. Generators and light towers that match innovation with efficiency. Unrivaled service and support, day or night. That’s a the way we’ve operated for over 100 years, and the way we’ll do business for dec d ades to come.
AIR COMPRESSORS / GENERATORS / LIGHT TOWERS AIR COMPRESSOR SALES
PINNACLE CENTRAL COMPANY, INC.
www.aircompsales.com
www.pinnaclecentral.com
GEORGIA
FLORIDA
5490 Thomaston Road Macon (478) 474-8460
103 Bryan Street Jacksonville (904) 354-5746 Polk City (888) 253-2444
ASCENDUM www.ascendummachinery.com NORTH CAROLINA SOUTH CAROLINA GEORGIA 11425 Reames Rd Columbia Savannah Charlotte (912) 964-8079 (803) 791-0740 (704) 596-8283 TENNESSEE Piedmont Asheville Knoxville (864) 704-1060 (828) 687-0620 (865) 525-1845 North Charleston Raleigh Chattanooga (843) 414-1120 (919) 661-8710 (866) 495-3406 Greenville (252) 754-5280
DoosanPortablePower.com | 800.633.5206
BLANCHARD MACHINERY, INC.
RICHMOND MACHINERY
www.blanchardmachinery.net
www.richmondmachinery.com
FLORIDA
VIRGINIA
1890 NE 150th St. Miami (305) 949-2581 Miami (305) 232-2255
1701 Roseneath Road Richmond (804) 359-4048
West Palm Beach (561) 833-4634
©2017 Doosan Infracore Portable Power
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 22, 2019 • Page 73
HE-equipment.com Springdale, AR 479-927-1672 Little Rock, AR 501-568-7867 Shreveport, LA 318-746-5272 Alexandria, LA 318-443-7173 Lafayette, LA 337-837-9600 Lake Charles, LA 337-528-2661 Baton Rouge, LA 225-356-6113 Kenner, LA 504-467-5906 Memphis, TN 901-375-4902 Nashville, TN 615-248-0266 Chattanooga, TN 423-499-7700 Arden, NC 828-684-1692 Charlotte, NC 704-504-2870 Raleigh, NC 919-781-9454 Winston-Salem, NC 336-767-6900 Chesapeake, VA 757-295-4944 Ashland, VA 804-798-9740 Roanoke, VA 540-362-3600 Warrenton, VA 540-349-2878
Reliability y, value and industry-leading pe erformance are yours with our co omplete por tfo olio of mobile telescopic cranes.
Grove product offering: All-terrain
50 t (55 USt)
Rough terrain Rough-terrain
25 t (28 USt)
Truck-mounted
50 t (55 USt)
Telescoping crawler
25 t (28 USt)
Industrial
5t (5 USt)
100 t 150 t 180 t 200 t 250 0t 60 t 80 t (65 65 USt) (100 USt) (115 USt) (175 USt) (210 USt) (240 USt) (300 USt)
30 t 35 t 45 t (3 30 USt) (40 USt) (50 USt)
60 t 65 t (65 USt) (70 USt)
90 t (100 USt)
70 t (80 USt)
55 t (60 USt)
30 t (30 USt)
80 t (80 USt)
300 t (350 USt)
45 t (50 USt)
7,7 t 8,1 t (8.5 USt) (9 USt)
50 t (55 USt)
9,5 t (10.5 USt)
400 t (450 USt)
450 t (500 USt)
120 t 135 t (130 USt) (150 USt)
100 t (115 USt)
70 t (80 USt)
13,6 t (15 USt)
120 t (130 USt)
18 t (20 USt)
22 t (25 USt)
460 t (507 USt)
140 t (154 USt)
110 t (121 USt)
125 t (138 USt)
25 t (28 USt)
www.ringpowercrane.com St. Augustine, FL 904-737-7730 Pompano Beach, FL 954-971-9440 Orlando, FL 407-855-6195 Tampa, FL 813-671-3700 Miami (Int. Sales) 305-477-8717 Union City, GA 770-774-7300 Concord, NC 704-795-3636 Ladson, SC 843-818-1954
www.manitowoc.com
Page 74 • May 22, 2019 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Guests Treated to Catfish Fry, Vendor Fair at Puckett Rents Event in Richland, Miss. PUCKETT from page 28
manufacturers displaying and promoting their wares, some with super-low show day pricing for their products. Vendors also offered giveaways and ongoing prize drawings. The grand prize giveaway was a Tracker Topper 12W Jon Boat full of DeWalt tools and Caterpillar “swag.” The grand prize winner was Chris Uzzle of Independent Roofing, Jackson, Miss. CEG
Jay Hall (C), Puckett Rents, welcomes his customers from J.L. Roberts Mechanical, based in Richland, Miss. to the event and (L-R) included Richard Sebren, Kyle Alford, Chris Jones, James Roberts and Tommy Alford.
BusinessCalendar To view our Business Calendar online, go to www.constructionequipmentguide.com. MAY/JUNE CRANE SAFETY TRAINING NEW LOCATIONS! REGISTER TODAY! Below, you will find the month of May’s Safety Training Courses. In May we have an Overhead Crane Train The Trainer Program in a special location, Sacramento, California, and, our Mobile Crane Inspector Course in Las Vegas, Nevada. MAY/JUNE CRANE SAFETY COURSES May 20 – 24, 2019 – Overhead Hoist Maintenance, Orlando, Florida. May 21 – 24, 2019 – Overhead Crane Inspector Training, Pasadena, Texas. May 21 – 24, 2019 – Overhead Crane Train, The Trainer, Cincinnati, Ohio. May 29 – 31, 2019 – Rigging Inspector Training, Cincinnati, Ohio. June 4 – 7, 2019 – Overhead Crane Train the Trainer, Pasadena, Texas June 4 – 7, 2019 – Mobile Crane Inspector Training, Orlando, Florida June 10 – 14, 2019 – Mobile Crane Train the Trainer, Sacramento, California June 11 – 13, 2019 – Boom Truck Train the Trainer, Pasadena, Texas June 11, 2019 – Qualified Rigger Level 1, Orlando, Florida June 12 – 14, 2019 – Rigging Inspector Training, Orlando, Florida For more information on these Crane Safety Courses, Phone: Tiffany at 800/654-5640, ext. 238. Email: talston@cranesafe.com. Rigging Kits are very popular this year. Order yours today!
AMERICAN PUBLIC WORKS ASSOCIATION (APWA) APWA North American Snow Conference Start Date: May 19, 2019 End Date: May 22, 2019 Place Name: Calvin L. Rampton Salt Palace Convention Center 90 South West Temple, Salt Lake City, UT 84101 Description: 2019 Snow Conference has it all – from expert-led snow and ice education sessions to an exhibit floor full of excited vendors who can not wait to show you the latest winter maintenance solutions for your community. Make plans to join your peers and take advantage of everything the NASC has to offer and meet us in Salt Lake City! For more information, contact APWA at 1200 Main Street, Suite 1400, Kansas City, MO 64105-2100. Phone: 816/472-6100. Toll Free: 800/848-APWA. Fax: 816/472-1610.
AMERICAN CONCRETE INSTITUTE ISEC 10 Dates: Time: Place:
May 20, 2019 to May 25, 2019 8:00-16:00 University of Illinois of Chicago 1200 West Harrison Street, Chicago, IL United States Sponsor(s): JCI, JSCE, ASCE Description: The ISEC-10 Conference aims to bring together the state-ofthe-art research and their applications in the fields of structural engineering and construction management. The Conference will provide a platform to dis-
Jerry Blackburn (L) of Upchurch Plumbing, Greenwood, Miss., and Ryan Newman of Puckett Rents have a postlunch chat.
cuss recent technical advancements and innovations in the profession of structural engineering and construction. For more information, contact: North Dakota State University P. O. Box 1334, Fargo, ND 58107 United States Website: www.isec-society.org/ISEC 10 Phone: 701/237-7878
MINNESOTA ASPHALT PAVEMENT ASSOCIATION 2019 NRRA Pavement Workshop Dates: May 21 – 23, 2019 We hope you have saved the dates for the 2019 NRRA Pavement Workshop, May 21 – 23. We have the best minds in the pavement industry on our various NRRA Teams. We will have the latest high-tech equipment at MnROAD. We will provide updates on current NRRA research initiatives. If that is not enough, we can show you what Minnesota’s brutal winter did to our pavements during the last six months with a tour of MnROAD. For more information on this Workshop, contact MAPA: Minnesota Asphalt Pavement Association 1000 Westgate Drive, Suite 252 St. Paul, Minnesota 55114 Telephone: 651/636-4666.
BONNELL INDUSTRIES, INC. TRUCK & ROAD EQUIPMENT BIENNIAL EQUIPMENT EXPO DATES: JUNE 5 – 6, 2019 PLACE: DIXON, ILLINOIS LOCATION: 1385 Franklin Grove Road, Dixon, Illinois DESCRIPTION: Bonnell Industries hosts their biennial Equipment Expo to introduce customers to their valued vendors, and to display new product advancements. In addition, the customers and vendors get the opportunity to meet the awesome employees that manufacture and install all of Bonnell’s products. The Bonnell Expo is anticipated to be bigger than ever before with over 40 vendors showcasing quality equipment. Also, new to the itinerary this year are Education Sessions! This year, Bonnell will exhibit full-equipped snow and ice fighting customer trucks, their industrial leaf vacuums, road drags, and Used Equipment for sale during the two-day event. Among the display equipment are NEW Bonnell built trucks available for purchase at the event! At the Bonnell Equipment Expo this year, look for the employees wearing Bonnell Orange shirts. The Bonnell staff is more than happy to answer any questions that you may have whether they are technical or sales-related. All available Bonnell employees are there to help! Not only is being at the Expo pleasant and educational, but there will be food, too! Each attendee will receive one free BBQ lunch ticket upon arrival. There will be pre-lunch snacks also! Don’t miss out on good food, great conversation, and quality equipment. This even will not happen again until June of 2021! Visit www.bonnell.com to learn how to register for this event!
AMERICAN CONCRETE INSTITUTE 2nd International Interactive Symposium on UHPC Dates: June 2, 2019 to June 5, 2019 Time: 5:00 PM-4:00 PM Place: Hilton Albany, Albany, New York, USA 40 Lodge Street, Albany, NY, USA Description: We are pleased to welcome you to the 2nd International Interactive Symposium on Ultra-High, Performance Concrete to be held in Albany, New York from June 2 to June 5, 2019. Building on the success of the first symposium that was held in July 2016, we are bringing together the UHPC Community for more learning, networking and advancement of this innovative technology. The interactive symposium
The vendor fair under “the big tent” was a great place to gain more info about the products available at Puckett Rents and to get some open house one-day-only deals.
will afford professionals working on all aspects of UHPC to: • Share knowledge about applications and opportunities • Broaden technical depth • Identify knowledge gaps • Grow the UHPC family dedicated to truly working together to achieve similar goals For more information, on the Symposium, contact: Iowa State University, Ames, IA Website: http://www.uhpcsymposium.com/ Email: sri@iastate.edu Phone: 515/294-6222
22ND ANNUAL SNOW & ICE SYMPOSIUM (SIMA). Dates: Place:
JUNE 25 – 26, 2019 DeVos Place 303 Monroe Avenue NW, Grand Rapids, MI 49503 The Greatest Show in Snow is headed to Grand Rapids, Michigan for our 22nd Annual Snow & Ice Symposium, and we would love to see you there! The Snow & Ice Symposium Trade Show features over 140 companies providing products, programs and services for snow & ice management industry professionals. You will be able to view new products, make purchasing decisions, and learn from our supporters. Easy to get to, get around in, and afford, Grand Rapids is a perfect destination for the 22nd Annual SIMA Symposium! Complimentary Airport Shuttle is offered. The Gerald R. Ford International Airport (GRR) is 13 miles from downtown and serves six major airlines, offering 120+ daily nonstop flights. Grand Rapids will be packed this June as we bring all the equipment, education and networking opportunities to the picturesque riverfront setting of the DeVos Place. The rush will be real in Grand Rapids, MI at the 22nd Annual Snow & Ice Symposium, featuring the industry’s biggest trade show! With 35+ hours of diverse education, the Best Show in Snow has something for every role in your snow and ice company. From museums to breweries, Grand Rapids has a lot to be excited about and it is accessible. You can do more in Grand Rapids in one day than you can in one week in other cities – think “close & convenient.” This key location is part of a vibrant downtown entertainment district featuring dining establishments, breweries, nightclubs, museums, and Arena, all within walking distance. The trade show will be held in Exhibit Hall BC. For easy access, enter from the Amway Grand Plaza skyway, Lyon Street, or the Monroe Avenue main entrance. For more information on the 22nd Annual Snow & Ice Symposium, contact Snow & Ice Management Association, 10140 N. Port Washington Road, Mequon, WI 53092. Phone: 414/375-1940. Email: Info@sima.org.
FORESTRY PRODUCTS MACHINERY & EQUIPMENT EXPO Connect, Explore, Discover Industry Meets Opportunity Dates: June 26, 2019 to June 28, 2019 Place: Georgia World Congress Center 285 Andrew Young International Blvd NW Atlanta, GA 30313 Forest Products Machinery & Equipment Expo is a 3-day event being held from 26th June to 28th June 2019 in Atlanta, GA, USA. This event will feature forest products and equipment, forest machinery and tools, parts and devices, components and accessories and other similar range of products and services. This Expo provides the forest products industry with a quality venue to discuss trends, discover new technologies and focus on manufacturing success. For more information on the Forestry Products Machinery & Equipment Expo: https://www.sfpaexpo.com/.
AMERICAN PUBLIC WORKS ASSOCIATION (APWA) May/June 2019 EVENTS: May 13 – 17, 2019
APWA Illinois Roads Scholar Program – 2019 Keller Convention Center Effingham, IL, Effingham, IL May 19 – 25, 2019 National Public Works Week All over, Unknown, WA May 22 – 23, 2019 2019 APWA Chicago Metro Expo and Conference Sponsorship Opportunities Odeum, Villa Park, IL May 22 – 23, 2019 2019 Expo and 5K Registration Odeum Expo Center, Villa Park, IL May 22 – 23, 2019 2019 APWA Chicago Metro Expo and Conference (Booth) Odeum, Villa Park, IL June 5 – 8, 2019 2019 Annual Conference Austin, Lewisville, TX June 5, 2019 Central Texas Branch / Central Branch 2019 CTB Scholarship Golf Tournament Crystal Falls Golf Course, Leander, TX June 5, 2019 Michigan / Downriver Branch Dan Brooks Scholarship Annual Golf Outing Lakes of Taylor TBD, MI Come Join us for the annual Dan Brooks Scholarship Golf Outing June 5, 2019 Ohio / Southwest Branch Traffic Engineering Workshop: Save the Date! Receptions Conference Centers, Fairfield, OH June 5, 2019 Chicago Metro / Southwest Branch Southwest Branch Golf Outing Silver Lake Country Club, Orland Park, IL For more information on the above events, contact APWA. Address: 1275 K St. NW #750, Washington, DC 20005. Phone: 202/408-9541. Toll Free: 800/848-APWA.
ASSOCIATION OF WOMEN CONTRACTORS (AWC) AWC SCHOLARSHIP GOLF FUNdraiser DATE: June 14, 2019 START TIME: 7:30 AM (June 14) FINISH TIME: 2:00 PM (June 14) PLACE: Majestic Oaks Golf Club 701 Bunker Lake Boulevard, NE Ham Lake, Minnesota 55304 Join us for AWC’s annual tournament to raise funds for scholarships. We award scholarship dollars to females entering the construction industry via the academic or apprenticeship track. The net proceeds from this event supports those scholarships. Scholarship Awards Luncheon / Silent Auction / Don’t forget to buy a chance to ride in style with our Deluxe Cart Chance! Deluxe carts come decorated and loaded with snacks, beverages and more! Details: 7:30 AM REGISTRATION 8:30 AM SHOTGUN START 12:00 PM AWARDS LUNCHEON immediately after 9th hole For more information on this event, contact AWC, 1337 St. Clair Avenue, Suite 4, St. Paul, MN 55105. Phone: 651/489-2221. Email: awcmn@awcmn.org.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 22, 2019 • Page 75
LINDER INDUSTRIAL MACHINERY www.linder.com Florida Ft. Myers • 239/337-1313 Jacksonville • 904/786-6710 Ocala • 352/629-7585 Orlando • 407/849-6560 Pembroke Pines • 954/433-2800 Plant City • 813/754-2727 West Palm Beach • 561/863-0570 North Carolina Asheville • 828/681-5172 Aurora • 919-628-2211 Charlotte • 980-777-8345 Greenville • 252/695-6200 High Point • 336/665-0110 Raleigh • 919/851-2030 Wilmington • 910/254-2031 South Carolina Columbia • 803/794-6150 Fort Mill • 803-832-2103 Greer • 864/877-8962 North Charleston • 843/486-8080
POWER EQUIPMENT www.powerequipco.com Chattanooga, TN • 423/894-1870 Kingsport, TN • 423/349-6111 Knoxville, TN • 865/577-5563 LaVergne, TN • 615/213-0900 Memphis, TN • 901/346-9800 Saltillo, MS • 662/869-0283
“THEY JUS ST WORK BETTER! W P
TRACTOR & EQUIPMENT COMPANY www.tec1943.com Alabama Alabaster • 205/621-2489 Anniston • 256/831-2440 Birmingham • 205/591-2131 Decatur • 256/355-0305 Dothan • 334/678-1832 Huntsville • 256/851-2222 Mobile • 251/457-8991 Montgomery • 334/288-6580 Tuscaloosa • 205/752-0621 Florida Panama City • 850/763-4654 Pensacola • 850/505-0550 Georgia Albany • 229/435-0982 Atlanta • 404-366-0693 Augusta • 706/798-7777 Calhoun • 706/879-6200 Columbus • 706/562-1801 Hoschton • 706/654-9850 Kennesaw • 678/354-5533 Macon • 478/745-6891 Savannah • 912/330-7500
A TRUSTEED NAME. “At Selge Constrruction, we’re a family business. s. We’ve a wide range of pprojects, built on a foundation of integrity knowledge and qquality workmanship. Selge hass gained respect throughout the Midwest for the highest quality work built in the safest way possiible. Komatsu builds a quality product that performs as prom mised and helps us get the job done. Th why Komatsu woorks for me!”
Marv Selgge / Selge Construction, Inc. / Niles, MI M
That’s t s why hy I am K Koma matsu ts komatsuamerica.com
035 © 2019 Komatsu America Corp. All Rights Reserved
Page 76 • May 22, 2019 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Fifth-Generation Family Firm Continues Manufacturing Iconic Construction Gear BULLARD from page 74
workers who are restoring power after a storm. We’re really proud of the people we protect, and we look forward to proremains active, and membership continues to grow. “We’re a company that’s very much focused on safety, viding future generations with our safety products.” The company is growing and recentand we’re thinking about safety for the ly added the Bullard Center in very long term. We like to think we are Lexington, Ky., where research and delivering peace of mind, that people development, new product developtrust us and trust our equipment in some ment, marketing, and global shared of the most hazardous environments. resources collaborate to develop the And so, it’s really important that people next generation of Bullard products and understand that we’re doing this for the services. Bullard is headquartered in right reasons,” Bullard said. “We’re Cynthiana, Ky., where the company’s dedicated to advancing human safety to products are manufactured and has enable long, healthy, and productive offices in Singapore and Germany, as lives, through innovative solutions. It’s well, to service customers around the amazing to think it all started with a hard world. hat. Our line of safety products today “We have accomplished a lot togethincludes so much more. We have respier and have saved the lives of many ratory protection for pharmaceutical during Bullard’s 121 years,” Bullard manufacturing and abrasive blasting for said. “Take a look at our rich heritage metal preparation. We have fire helmets chronicled on our Century of and thermal imaging cameras to protect Innovation website at emergency responders. We like to think www.bullard.com/celebrate. Our Hard that ours is a very noble calling. We get Golden Gate Bridge construction Boiled Hat revolutionized safety. Our to protect the brave customers: the firefighters who are running into a burning building when every- great tradition of protecting lives through innovative soluone else is running out; the people who are researching and tions fuels our commitment to Bullard’s future success. This making the drugs that will heal those that are sick; the line is a great time to be a member of the Bullard family.”
Alabama’s ‘One Man Show’ Praises Purchase of SANY Mini-Excavator Crocker admitted after making his latest purchase. “It’s as good as anything out there, but with a better warranty than all the rest. You can’t ask for much more!” Crocker says he’s been pleasantly surprised by the machine, particularly how everything is very easy to get to. The only service work that’s been required is the routine changing of fluids and periodic greasing. So now Crocker’s fleet is a dump truck, a pickup truck, a couple of trailers, a track loader, and a SANY miniexcavator. “I can do everything I need with these pieces, and if I need anything else, I rent it from Brian,” Crocker said. “My success stems from being small and nimble. When other contractors may be backlogged with work, I take small jobs and can go to work immediately.” It’s this ability that provides him with continuous work within a 10-mile radius of his home base. “We hear about the quality work
Rick does and the reputation he has,” Phillips stated. “We like to look back and say we were a part of the beginning of his company and the progression of his company and the good reputation he has achieved. Our job is to help our customers be successful and to be a successful partner for them. I’m glad to have been able to work with Rick.” The “nuts and bolts” of the machine were very enticing to Crocker. The 30 hp Tier IV final Yanmar engine with Kawasaki pumps requires no regeneration and no DEF fluid. “The things that other people have to deal with on a Tier 4 final engine, I don’t,” Crocker said. “I put diesel fuel in it and go to work. It’s virtually the same set up as the larger SANY excavators, but in a smaller platform. Can’t ask for much more.” “The lifting capacity for this size machine is quite astounding,” Crocker continued. “The cycle times are quick. It’s easy to haul. It came at a better
price and the quality is the same or better than others, but with a better warranty. I feel quite comfortable with the whole package.” Crocker added that the service and support he receives from his SANY dealer is “second to none, and that he and Phillips still communicate regularly. “Brian is the best salesman I’ve ever worked with,” he said. “We talk quite often and have become business partners and friends. We share ideas backand-forth and we try to reciprocate business.” “Anyone in the market for a miniexcavator should try one of these,” Crocker said in endorsement of the product. “It’s simple to service, simple to operate. Not a lot of the extra ‘gadgetry’ that I don’t use. It doesn’t break the bank, we have a dealer and manufacturer to support it, and a lengthy warranty period. Low cost of ownership is the bottom line on this purchase.” CEG
CCS EQUIPMENT SALES www.ccsequipment.com Raleigh/Durham, NC • 919-556-9110 Angier, NC • 919-935-0505
CLM EQUIPMENT CO., INC. www.clmequipment.com Lafayette, LA • 337-837-6693 Lake Charles, LA • 337-625-5942 Houston, TX • 281-598-2500
GSE GREAT SOUTHERN EQUIPMENT COMPANY www.gsequipment.com Tampa, FL • 866-586-8956 Pompano Beach, FL • 954-327-8808 Ft. Myers, FL • 239-334-6063 Tallahassee, FL • 850-574-0892 Orlando, FL • 407-859-9160 Jacksonville, FL • 904-268-4400
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 22, 2019 • Page 77
HEAVY MACHINES INC. www.heavymachinesinc.com Memphis, TN • 800-432-8902 Shreveport, LA • 800-548-3458 Gray, TN • 855-201-7453 825 31st Street North Birmingham, AL 205-323-6108 • 844-344-8658
LINK-BELT MID ATLANTIC www.link-beltmidatlantic.com Ashland, VA • 866-955-6071 Dealer Chesapeake, VA • 800-342-3248
May • RHI www.mayequip.com www.robshydraulics.com Imprint Area Lexington, NC • 866-629-3784 Benson, NC • 919-243-0631 Charlotte, NC • 866-629-3784 Grimesland, NC • 252-752-1500 Charleston, SC • 866-629-3784 Columbia, SC • 866-629-3784 Greenville, SC • 866-629-3784
PITTMAN TRACTOR COMPANY, INC. www.pittmantractor.com 9652 Milton Jones Rd. Daphne, AL 36526 251-621-3555
Page 78 • May 22, 2019 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Toys For Boys (and also men) Realistic Scale Models of Construction Equipment, ideal gifts for the Holidays, Birthdays, Graduation, etc.
Tadano ATF 160G-5 All Terrain Crane, 1:50 scale - $200
Caterpillar D-4 Tractor w/Letourneau Dozer & Winch, 1:16 scale - $180
Caterpillar D-4 Tractor with 4S Bulldozer, 1:16 scale - $180
Bantam Crane on White WC Carrier, 1:50 scale - $150
Caterpillar D10T2 Track-Type Tractor, 1:50 scale - $140
Caterpillar D7E Track-Type Tractor w/ Pipeline Configuration, 1:50 scale - $110
Kenworth T880 w/Tri-Axle Lowboy, Red/Red, 1:50 scale - $110
Case 1450B Crawler Dozer, 1:16 scale - $110
Kenworth T880 w/Tri-Axle Lowboy, Black & Silver, 1:50 scale - $110
Caterpillar 963K Track Loader w/Ripper, 1:50 scale - $85
Mack Black Granite Dump Truck, 1:50 scale - $100
Allis Chalmers Forty-Five Motor Grader, 1:50 scale - $100
Peterbilt 367 Black/Red Dump Truck, 1:50 scale - $100
Mack B-61 Single axle Dump Truck, 1:34 scale - $90
Caterpillar 323F Excavator w/Thumb, 1:50 scale - $90
Komatsu WA500-7 Wheel Loader, 1:50 scale - $90
Shipping and Handling Included
CEG Scale Models 470 Maryland Drive Fort Washington, PA 19034
WE PURCHASE COLLECTIONS!!!
Contact – Barry McKeon
800-523-2200
Ext. 197
• 610-506-5961 Cell
Email – bmckeon@cegltd.com
Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 22, 2019 • Page 79
ON E COM PANY TWO POWERFULL BRANDS
Contact ou our distributors a and find out how we can c help improve your bottom line. Visit info.tere ex.com/distributorsearch to find your local distributor.
DOZIER CRANE RT-T-HC/CC-AT-BT www.doziercrane.com 155 Pine Barren Road Pooler, GA 31322 912-748-2684
For Your Local Terex Dealer Please Contact: Terex USA, LLC 9528 West Interstate 40 Service Road Oklahoma City, Oklahoma 73128 USA Phone: (877) MY-TEREX email: info.cranes@terex.com web: www.terex.com/cranes
Authorized Distributor Cranes © Terex Cranes 2019. Terex, the Terex Crown design and Demag are trademarks of or licensed by Terex T Corporation or its subsidiaries.
Page 80 • May 22, 2019 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
After 20 Years, W&W Crane & Rigging Still Finds That Every Day Is Different W&W from page 18
“We first saw the crane last year at ConExpo in Las Vegas, and it just fit into our needs with the other sized cranes we had,” Lizotte said. “It replaced the 70-ton, but it allows us to do more work in the 110, 120 range. It is a very versatile crane.” Of course, customer service plays a large role in any relationship between a company and its supplier, and Lizotte has nothing but good things to say about Pinnacle. “It starts at the top with John Dozier. He has been a great salesman,” Lizotte said. “He always helps with our needs and what we are looking for. And if we have a problem with it, Jason Pearsall, the service manager, solves it. And [assistant service manager] Joe Stanton and boom truck and crane product specialist Mark Baker — they are both very educated in what they do. It’s a great advantage to deal with a great service group when you have a problem.” Some of the Walls’ more prominent and unusual jobs have included raising a water tank in High Point, placing a clock tower at North Carolina Agricultural and Technical State University and helping scuba divers pull pipe out of Randleman Lake. “We’ve set some big insect sculp-
ALABAMA FLORIDA THOMPSON TRACTOR DOBBS EQUIPMENT
Daniel Lizotte, operations and sales manager of W&W Crane & Rigging, said all projects are interesting because they all have their unique skill sets.
W&W Crane & Rigging approaches each job individually with its own inherent hurdles and achievements.
tures at the North Carolina Zoo,” Mong said. “Daniel uses a program called a 3D lift plan. Let’s say it’s a tight spot, or there’s a lot of figuring, then he uses that computer program. It was an interesting project because it’s different from what we normally do.” Both Wall and Mong give Lizotte’s creativity much of the credit for their company’s growth over the past five years. “Daniel has played an absolutely huge role in it,” Mong said. “He is out there all hours of the day. It does not matter. He is going to meet new customers and try to get more business for us Whatever they ask, whatever types of jobs they want, he is going to find a way to make it work.”
www.thompsontractor.com Auburn, AL 334-321-2030 Birmingham, AL 205-326-0334 Dothan, AL 334-673-3300 Huntsville, AL 256-532-3001 Mobile, AL 251-452-1180 Montgomery, AL 334-262-1101 Oxford/Anniston. AL 256-835-5737 Shelby County, AL 205-649-9489 Tuscaloosa, AL 205-247-3402
www.dobbsequipment.com Riverview (Main Office) 813-620-1000 Fort Myers 239-334-3627 Lutz 813-995-0841 Miami 305-592-5740 Orlando 407-299-1212 West Palm Beach 561-848-6618 Pompano Beach Parts 954-977-9541 Riverview Parts 813-621-4902 Sarasota Parts 941-960-2004
LOUISIANA H&E EQUIPMENT SERVICES
THOMPSON TRACTOR
www.he-equipment.com Alexandria 318-443-7173 Baton Rouge 225-356-6113 Kenner 504-467-5906 Lafayette 337-837-9600 Lake Charles 337-528-2661 Shreveport 318-746-5272
www.thompsontractor.com Pensacola, FL 850-471-6710
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 22, 2019 • Page 81
NORTH CAROLINA CAROLINA CAT Serving Western North Carolina 800-277-2080 www.carolinacat.com Greensboro 336-294-5240 Charlotte - Main 704-596-6700 Charlotte - North 704-921-1178 Charlotte - South 704-401-5635 Monroe 704-292-1555 Hickory 828-464-7045 Asheville 828-251-2500
GEORGIA YANCEY BROS. CO. www.yanceybros.com Austell 800-282-1562 Albany 800-768-2892 Augusta 800-446-5131 Bloomingdale 800-482-1144 Brunswick 800-299-5010 Calhoun 800-752-9804 Columbus 800-633-5240 Dacula 800-545-2945 Macon 800-633-5180 McDonough 888-926-2392 Savannah 800-755-8382 Statesboro 888-764-6506 Valdosta 800-755-6841 Washington 888-678-3211 Waycross 888-948-2443
Page 82 • May 22, 2019 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CHALLENGE MEEET SOLUTION
COMPE ETITIVE FINANCING AV VAILABLE AILA ABLE TO LEARN MORE E, CALL Y YOUR OUR SALES REPRESENT REPR RESENTTA ATIVE A TIVE OFFER V VALID ALID THROUGH JUNE 30, 2019 2
ENGINEERED FOR Mining | Road & Highway | Constrruction | Forestry | Landfill info@dressta.com | www.dressta.com | info@liugongna.com | 281-579-8882 © 2019 LiuGong Construction Machinery N. A., LLC
CCS Equipment Sales, LLC www.ccsequipment.com
Raleigh – Durham – Chapel Hill 5428 Highway 96 Youngsville, NC 27596 (919) 375-7129 (877) 469-3471
Fuquay – Holly Springs Sanford – Fayetteville 836N Broad Street Angier, NC 27501 (919) 935-0505
Mid-South Equipment Co.
Southland Machinery
www.midsouthequipment.com
www.southlandmachinery.com
1609 Church Road Chattanooga, TN 37421 (423) 899-1219
8920 Weaver Avenue Leeds, AL 35094 (205) 699-2699 155 Liberty Road Villa Rica, GA 30180 (678) 952-6802
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 22, 2019 • Page 83
DES SIGNED D TO GET MORE RE DONE
COMP C OMP PETITIVE ETITTIVE FFINA INA ANCING AN A CING A AVAILABLE AV VAILABLE V AILABLE AILABLE AIL LABLE TO LEARN MOR RE, CALL Y YOUR OU UR SALES REPRESENT REPRESENTA TA ATIVE TIV VE OFFER RV VALID ALID THROU UGH JUNE 30, 2019 • • • •
North American sales and parts support More features come standard, improving ROI LiuGong’s industry leading 3 year warranty Full line of Tier 4 Final construction equipment
CCS Equipment Sales, LLC Raleigh – Durham – Chapel Hill 5428 Highway 96 Youngsville, NC 27596 (919) 375-7129 (877) 469-3471
Fuquay – Holly Springs Sanford – Fayetteville 836N Broad Street Angier, NC 27501 (919) 935-0505
www.ccsequipment.com
www.liugongna.com
(281) 579-8882
Ä? /LX*RQJ &RQVWUXFWLRQ 0DFKLQHU\ 1 $ //&
TOUGH WOR RLD. TOUGH EQUIPMENT.
Page 84 • May 22, 2019 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
ALEX LYON & SON AUCTIONEERS www.lyonauction.com 315-633-2944 • Queretaro, Mexico Fri., May 24, 2019 For: Late Model Earthmoving Equipment & more
• Kansas City, MO June 11, 2019 • Sacramento, CA June 11, 2019 • Minneapolis, MN June 18, 2019
• Toronto (Ontario), Canada Sat., May 25, 2019 For: Major Late Model Rental Return Auction
• Houston, TX June 18 - 19, 2019
• Portland, ME Thurs., May 30, 2019 For: Large Ag & Construction Equipment Auction
• Nashville, TN June 21, 2019
• Parkersburg, WV Fri., May 31, 2019 For: Very Special Sale. Late Model Construction Equipment & more • Manchester, VT Sat., June 1, 2019 For: Complete Liquidation Late Model Construction Equipment • Newark, NJ Thurs., June 6, 2019 For: Complete Liquidation Retirement Auction • Fulton (Syracuse), NY Fri., June 7, 2019 For: 2 Complete Liquidations of Concrete Block Companies • Las Vegas, NV Sat., June 8, 2019 For: Very Late Model Rental Construction Equipment Auction • Atlantic City, NJ Sat., June 15, 2019 For: Large Rental Fleet Equipment Auction • Houston, TX Wed., June 19, 2019 For: Late Model Rental Returns • Houston, TX Thurs., June 20, 2019 For: Major Job Completion, Late Model Earth Moving Equipment • Pittsfield (Dalton), MA Sat., June 22, 2019 For: Major Job Completion Construction Equipment • Boston, MA Sat., June 28, 2019 For: Late Model Construction Equipment & more • Canastota (Syracuse), NY Sat., July 13, 2019 For: Fanciest Late Model Construction Equipment & more • Youngstown, OH Sat., August 10, 2019 For: Job Completion Construction Equipment & more • Albany, NY Sat., September 7, 2019 For: Very Large Late Model Job Completion Auction RITCHIE BROS. AUCTIONEERS www.rbauction.com 402-421-2631 • Orlando, FL May 22, 2019 • Lexington, KY May 29, 2019 • Chehalis, WA June 4, 2019 • Bozeman, MT June 6, 2019
• Chicago, IL June 20, 2019
• North East, MD June 25, 2019 • Salt Lake City, UT June 25, 2019 • Atlanta, GA June 26, 2019 BIDADOO AUCTIONS www.bidadoo.com 1-877-BIDADOO • ONLINE ONLY May 23, 2019 • ONLINE ONLY May 30, 2019 • ONLINE ONLY June 6, 2019 • ONLINE ONLY June 13, 2019
Coming Auctions To view information on upcoming auctions visit our Auction Calendar at www.constructionequipmentguide.com FREY & SONS, INC. www.freyandsons.com 419-455-3739 • Columbus, OH Fri., May 31, 2019 For: The Shelly Company Spring 2019 Auction GOVPLANET an IronPlanet Solution www.govplanet.com 844-225-8799 • ONLINE ONLY Closes July 2, 2019 For: PennDOT Annual Heavy Equipment Auction HESS AUCTIONEERS www.hessauctioneers.net 866-511-2493 • Marietta, PA Fri., June 14, 2019 For: Trucks, Trailers & Equipment
• Kenmore, WA Sat., August 10, 2019 For: Heavy Equipment, Contractors Equipment & Vehicles JEFF MARTIN AUCTIONEERS, INC. www.jeffmartinauctioneers.com 601-450-6200 • Wills Point (Canton), TX Thurs., May 23, 2019 For: East TX Public Auction • Columbia, SC Thurs., May 30, 2019 For: Two Day Public Auction • Columbia, SC Thurs., May 30, 2019 For: Surplus Inventory Auction • Northville (Detroit), MI Thurs., June 6, 2019 For: SE MI Surplus Equipment Dispersal Auction
• Marietta, PA Fri., August 16, 2019 For: Trucks, Trailers & Equipment
• Greer, SC Thurs., June 20, 2019 For: One Owner Absolute Auction – Southern Steel Erectors
HUNYADY AUCTION COMPANY www.hunyady.com 800-233-6898
J.J. KANE AUCTIONEERS www.jjkane.com 856-764-7163
• West Hickory, PA Thurs., June 6, 2019 For: Absolute Auction Surplus Equipment Liquidation
• ONLINE ONLY Fri., June 7, 2019 For: JJ Kane Exchange Timed Online Auction
I.R.A.Y. AUCTION www.iraymn.com 320-968-7230
• Riviera Beach, FL Sat., June 22, 2019 For: Construction, Utility Equipment and more
• ONLINE ONLY June 19, 2019
• Foley, MN Fri., June 7, 2019 For: Heavy Equipment, Truck & Trailer Auction
• Plymouth Meeting, PA Sat., June 29, 2019 For: Construction, Utility Equipment and more
DEANCO AUCTIONS www.deancoauction.com MS: 601-656-9768
IRON BOUND AUCTIONS www.ironboundauctions.com 432-209-5112
J.M. WOOD AUCTION COMPANY www.jmwood.com 800-447-7085
• Seminole, TX May 21 - 22, 2019 For: Two Day Equipment Auction
• Montgomery, Al June 11 - 13, 2019 For: Construction Equipment, Truck, Trailer and Forestry Auction
• ONLINE ONLY June 20, 2019 • ONLINE ONLY June 27, 2019 BIG IRON www.bigiron.com 800-937-3558 • ONLINE ONLY May 22, 2019 • ONLINE ONLY May 29, 2019 • ONLINE ONLY June 5, 2019 • ONLINE ONLY June 12, 2019
AL: 334-693-2540
• Philadelphia, MS May 22 - 23, 2019 For: Huge 2-Day Public Auction DON SMOCK AUCTION CO., INC. www.dsa-auctions.com 765-778-9277 • Madison, IN Thurs., May 30, 2019 For: Indiana Department of Administration Surplus • Crawfordsville, IN Tues., June 4, 2019 For: Indiana Department of Administration Surplus • Crawfordsville, IN Thurs., June 11, 2019 For: Indiana Department of Administration Surplus
J. STOUT AUCTIONS www.jstoutauction.com 888-230-8840 • Portland, OR Wed., June 5, 2019 For: Heavy Equipment & Commercial Truck Auction JAMES G. MURPHY INC. AUCTIONEERS www.murphyauction.com 800-426-3008 • Kenmore, WA Sat., June 8, 2019 For: Heavy Equipment, Contractors Equipment & Vehicles
McGREW EQUIPMENT COMPANY www.mcgrewequipment.com 888-311-2811 • Seven Valleys, PA Tues., June 11, 2019 For: Tractor, Farm & Construction Equipment Auction • Seven Valleys, PA Tues., July 9, 2019 For: Farm & Construction Equipment Auction • Seven Valleys, PA Tues., August 13, 2019 For: Farm & Construction Equipment Auction
PURPLE WAVE AUCTION www.purplewave.com 866-608-9283 • ONLINE ONLY Wed., May 22, 2019 For: Vehicles & Equipment Auction • ONLINE ONLY Thurs., May 23, 2019 For: Construction Equipment Auction • ONLINE ONLY Tues., May 28, 2019 For: Jim Miller Construction Retirement Auction • ONLINE ONLY Wed., May 29, 2019 For: Ag Equipment Auction • ONLINE ONLY Thurs., May 30, 2019 For: Truck & Trailer Auction
• ONLINE ONLY June 21 - 26, 2019 For: Timed Online Steffes Auction • West Fargo, ND Wed., July 31, 2019 For: AgIron Event, Red River Valley Fairgrounds THE AUCTION COMPANY www.theauctioncompany.net 951-657-5300 • Colton, CA Sat., June 22, 2019 For: Heavy Equipment, Trucks, Trailers and more • ONLINE ONLY Mon., June 24, 2019 For: Heavy Equipment, Trucks, Trailers and more
• ONLINE ONLY Thurs., May 30, 2019 For: Great Plains Kubota Equipment Auction
VANTAGE AUCTIONS www.vantageauctions.com 951-228-9040
RITCHASON AUCTIONEERS INC. www.ritchason.com 800-806-3395
• Lake Elsinore, CA Sat., June 8, 2019 For: Heavy Construction Equipment and more
• Lebanon, TN Sat., June 8, 2019 For: Construction Equipment • ONLINE ONLY Thurs., July 11, 2019 For: Construction Equipment RTI AUCTIONS www.teitsworth.com 585-243-1563 • ONLINE ONLY May 16 - 23, 2019 For: Riccelli Enterprises Fleet Auction • ONLINE ONLY June 4 - 11, 2019 For: June NetAuction SALES AUCTION COMPANY, LLC www.salesauctioncompany.com 860-627-7506 • New Haven, CT Sat., June 1, 2019 For: Complete Liquidation Abcon Abatement. SHERIDAN REALTY & AUCTION COMPANY www.sheridanauctionservice.com 517-676-9800 • ONLINE ONLY Thurs., June 13, 2019 For: Causie Contracting Equipment Reduction STEFFES GROUP INC. www.steffesgroup.com 701-237-9173
WAYNE PIKE AUCTION COMPANY www.waynepikeauction.com 763-389-2700 • Princeton, MN Sat., June 8, 2019 For: Construction Equipment, Truck & Trailer Auction WESTERN CONSTRUCTION AUCTIONS INC. www.wca-online.com 866-731-7760 • Perris, CA Fri., June 14, 2019 For: Heavy Equipment Auction WSM AUCTIONEERS www.wsmauctioneers.com 623-936-3300 • Phoenix, AZ Sat., June 8, 2019 For: Live Public Auction • Phoenix, AZ Sat., July 13, 2019 For: Live Public Auction • Phoenix, AZ Sat., August 10, 2019 For: Live Public Auction YODER & FREY HEAVY EQUIPMENT AUCTIONS www.yoderandfrey.com 419-865-3990
• ONLINE ONLY May 17 - 22, 2019 For: Timed Online Steffes Auction
• Kissimmee, FL Thurs., May 23, 2019 For: Heavy Equipment Auction
• ONLINE ONLY June 7 - 12, 2019 For: Timed Online Steffes Auction
• Findlay, OH (New Site) Thurs., June 6, 2019 For: Heavy Equipment Auction
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 22, 2019 • Page 85
H E A V Y E Q U I P M E N T | T R A I L E RS | T R U C K S | C O M M E R C I A L V E H I C L E S
3 0 T H A NNIV E RS A RY AUC T ION & CE L E BR AT ION E V E N T
SA ATTURDAY AYY,, JUNE 8TH · 8AM A CDT L E B A N O N , T N | B I D O N S I T E O R O N L I N E | M O R E I T E M S A D D E D D A I LY
2 0 0 8 J O H N D E E R E 3 5 0 D L C H Y D E X C AVAT O R
2 011 C AT D 6 K L G P C R AW L E R T R A C T O R
2 0 0 7 C A T D 6 K L G P C R AW L E R T R A C T O R
2 014 C AT 3 0 8 E 2 C R M I N I E X C AVAT O R
2 014 TA K E U C H I T B15 3 F R M I N I E X C AVAT O R
19 97 K OM AT S U D6 5P X-12 CR AW L E R T R A C T OR
19 8 8 C A T D 3 C C R AW L E R T R A C T O R
19 7 7 C A T D 4 E C R AW L E R T R A C T O R
19 7 3 C A T 9 5 5 L C R AW L E R L O A D E R
2 000 J O H N D E E R E 2 5 0 S K ID S T E E R
2011 VOL O VO SD100D VIB PADFOOT COMPAC TOR
19 8 7 G A L I O N A 4 5 0 E M O T O R G R A D E R
J O H N D E E R E 4 24 0 F A R M T R A C T O R
W H I T E 22 10 5 F A R M T R A C T O R & NE W HOL L A ND 855 R O UND B A L E R
2 0 0 6 M A C K C L7 3 3 T R I - A X L E D U M P T R U C K
2 0 0 1 I N T E R N AT I O N A L 4 9 0 0 S A B K T T R U C K
2 000 F R E I G H T L I N E R S P O R T S C O A C H M O T O R C O AC H
VIE W T HE F UL L CATA LOG A ND P RE-REGIS T ER FOR T HIS S A L E BY VISI T ING RI T CH AS ON.C OM Located along I-40 just east of Nashville, TN, Ritchason Auctioneers specializes in heavy equipment and commercial truck sales including farm equipment,, vehicles,, dump trucks and trailers.
RITCHASON.COM | 615.257.1422 | 7 5 3 8 L IN WO O D R D. L E B A N O N , T N 3 7 0 9 0
T N F IR M # 2 0 4 8
Page 86 • May 22, 2019 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Attention Contractors! Post Your Wanted To Buy Listings FREE! Here’s How! List Your Wanted Items
If you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted and enter your listings. Inappropriate or Sale Ads will be Deleted WANTED: HITACHI EXCAVATORS. WE ARE LOOKING TO BUY HITACHI EXCAVATORS EX200, EX270LC, EX400, EX400LC. PLEASE CONTACT US IF ANY MACHINE AVAILABLE. EMAIL: HIDAYATMASOOD@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: CATERPILLAR WHEEL LOADERS. WE ARE LOOKING TO BUY CAT WHEEL LOADERS 950B, 950E, 966E, 966F, 966FII, 970F. PLEASE CONTACT US IF ANY MACHINE AVAILABLE. EMAIL: HIDAYATMASOOD@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 966F II WHEEL LOADERS. EMAIL: ILYAS.MTCPK@GMAIL.COM; PHONE:923-462-6537 –––––––––––––––––––––––––––––––– WANTED (OH): CATERPILLAR HAULER TRUCKS. CAT AND VOLVO 25, 30 TON ARTICULATED TRUCKS AT WHOLESALE PRICES ONLY. EMAIL: REBUILD@TUSCO.NET –––––––––––––––––––––––––––––––– WANTED (NV): CATERPILLAR 966D, 966E, 966F, 966F II, 966G, 966G II, 966H, 970F, 970G, 972G, 972G II, 972H, 980G AND 980G II WHEEL LOADERS. EMAIL: SALES1@HIEEQUIPMENT.COM; PHONE: 702-529-5171 –––––––––––––––––––––––––––––––– WANTED (NM): SKYTRAK 10054 10,000# TELEHANDLERS / FORKLIFTS. LOOKING FOR A PRICE & AVAILABILITY ON A NEW SKYTRAK FORKLIFT. EMAIL: DOUBLEMENERGY@AOL.COM; PHONE: 575-391-0222 –––––––––––––––––––––––––––––––– WANTED (US): HITACHI EX600 EXCAVATOR. I AM LOOKING FOR A 17' ARM FOR A 600 HITACHI. EMAIL: JOHNK@NETNET.NET; PHONE: 920-655-3801 –––––––––––––––––––––––––––––––– WANTED (US): LINCOLN VANTAGE 500 WELDERS. I'M LOOKING FOR AT LEAST 6NO. VANTAGE 500 PREOWNED WELDERS FOR OUR COMPANY, OUR BUSINESS IS IN OIL AND GAS, PREFABRICATION, PLANT MAINTENANCE..ETC. EMAIL: FAYARD.HOSEIN @ASEQUITHTT.COM; PHONE: 1(868)3962431 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR D10N CRAWLER DOZERS. WANT TO BUY ALL THE TIME FROM USER ONLY. BULLDOZER- D3AT, D11, ENC CAB UNDER 3500 HOURS, UNADVERTISED. MUST BE 2015 AND UP. EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA; PHONE: 1 450 346 8975 –––––––––––––––––––––––––––––––– WANTED: CATERPILLAR 140G MOTOR GRADERS, CATERPILLAR 966F II WHEEL LOADERS. EMAIL: ILYAS.MTCPK@GMAIL.COM; PHONE: +923462653742 ––––––––––––––––––––––––––––––––
WANTED (MI): JCB - ALL MODELS, MATERIAL HANDLERS. LOOKING FOR A JCB 940 OR COMPARABLE BRAND, ROUGH TERRAIN FORKLIFT. EMAIL: CWELLER@WELLERSALVAGE.COM; PHONE: 616-257-1326 –––––––––––––––––––––––––––––––– WANTED (AL): KENWORTH T8 SERIES DUMP TRUCKS AND MACK GU713 ROLL OFF TRUCKS. COMMENTS: CLASS 8 , ROLLOFF TRUCKS, DUMP TRUCKS, VOCATIONAL TRUCKS, ANY BRANDS, QUANTITIES, OR YEAR MODELS. I HAVE AN ONGOING NEED TO BUY LOTS OF THESE. EMAIL: CHUGHCUMMINGSJR@ GMAIL.COM PHONE: 205-907-9787 –––––––––––––––––––––––––––––––– WANTED (US): HITACHI EX400LC-1 EXCAVATORS. EMAIL: ILYAS.MTCPK@GMAIL.COM PHONE: +923462653742 –––––––––––––––––––––––––––––––– WANTED (US) MANUFACTURER: CATERPILLAR 950B WHEEL LOADERS EMAIL: ILYAS.MTCPK@GMAIL.COM PHONE: +92-346-265-3742 –––––––––––––––––––––––––––––––– WANTED (NM): CATERPILLAR ALL MODELS ROAD MAINTENANCE. COMMENTS: SOLICITO POR ESTE MEDIO LA COTIZACIÓN DE UNA RETROEXCAVADORA 4X4 Y UNA MOTONIVELADORA LAS DOS 2005 Y MARCA CATERPILLAR A NOMBRE DE LA EMPRESA GECOD S.A. DE C.V. EMAIL: BRAULIOALBERTO23@ GMAIL.COM PHONE: 287-110-3964 –––––––––––––––––––––––––––––––– WANTED (PA): CATERPILLAR 973C CRAWLER LOADER. COMMENTS: LOOKING FOR A CATERPILLAR 973C READY TO GO TO WORK. EMAIL: CHICK@FITZEQUIP.NET PHONE: 215-805-3650 –––––––––––––––––––––––––––––––– WANTED (US): KOMATSU PC490LC-10 EXCAVATOR. COMMENTS: LOOKING FOR NEW OR GOOD USED 70” OR 72” DITCHING/CLEAN UP BUCKET TO PIN ONTO A KOMATSU PC490LC-10. THANK YOU IN ADVANCE TO ANYONE THAT CAN HELP. EMAIL: SALES@MARCELEQUIPMENT.COM. –––––––––––––––––––––––––––––––– WANTED: ALL MODELS CATERPILLAR CRAWLER LOADERS. EMAIL: RWESTON.SELAND.CO.UK@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (NY): ALL MODELS DINGO COMPACT TRACK LOADERS. LOOKING FOR FRONT QUICK COUPLER EMAIL: NEGRIINC@GMAIL.COM; PHONE: 845-590-2640 ––––––––––––––––––––––––––––––––
WANTED (USA): LULL - LULL 644, 944, 1044 FORK LIFTS. EMAIL: REBUILD@TUSCO.NET –––––––––––––––––––––––––––––––– WANTED (USA): ALL MODELS KOBELCO EXCAVATORS. ANY 20 TO 40 TON KOBLECO EXCAVATORS IN GOOD CONDITION. EMAIL: REBUILD@TUSCO.NET –––––––––––––––––––––––––––––––– WANTED (CA): CATERPILLAR 950E WHEEL LOADERS. CAT MOTOR GRADERS 140G SERIAL 72V11000 UP CAT WHEEL LOADERS 950B, 950E, 916, 930, 966D, 926, 966E, 966F, 966FII DYNAPAC ROLLERS CA251, CA252, CA262, CA301, CA302, CA362, CA602 HITACHI EXCAVATORS EX200, EX270, EX400, EX60WD, EX100WD JOHN DEERE WHEEL EXCAVATOR 495D, 595D. EMAIL: ZOHAIBKHAN212@OUTLOOK.COM; PHONE: 00923319949449 –––––––––––––––––––––––––––––––– WANTED (NY): NEW HOLLAND COMPACT TRACK LOADERS. NEED SOMETHING 2009 10,000 UNDER COMPACT SKID LOADER FOR DIGGING POOLS, USED OR LEASED ASAP!!!!!! I HAVE 20 POOLS NEED DONE. EMAIL: JOSHUA021188@GMAIL.COM; PHONE: 716-225-7171 –––––––––––––––––––––––––––––––– WANTED (CT): ALLMAND TLB 425 BACKHOE LOADER. EMAIL: DARRENCMAS@YAHOO.COM; PHONE: 860-212-6681 –––––––––––––––––––––––––––––––– WANTED (USA): CATERPILLAR 307 SSR EXCAVATOR. EMAIL: MYPERSONALCADDY@ HOTMAIL.COM; PHONE: 1-613-662-4535 –––––––––––––––––––––––––––––––– WANTED (USA): CATERPILLAR D6R CRAWLER DOZER. WE ARE LOOKING FOR: CAT D6R/T 36” COMPLETE SET OF SYSTEM ONE PADS – NEW OR USED PLEASE FORWARD DETAILS, ASKING PRICE AND PHOTOS TO: SALES@MARCELEQUIPMENT.COM. WE APPRECIATE AND THANK YOU FOR YOUR RESPONSE. –––––––––––––––––––––––––––––––– MANUFACTURER: CATERPILLAR D8T CRAWLER DOZER. WE ARE LOOKING FOR THE FOLLOWING: CAT D8N/R/T COUNTERWEIGHT DRAWBAR AND SET OF NEW OR USED SYSTEM ONE TRACK CHAINS FOR A CAT 330CL PLEASE FORWARD DETAILS, ASKING PRICE AND PHOTOS TO: SALES@MARCELEQUIPMENT.COM. WE APPRECIATE AND THANK YOU FOR YOUR RESPONSE. –––––––––––––––––––––––––––––––– WANTED (USA): ALL MODELS POWERHOUSE COMPACT TRACK LOADERS UNIT WITH ATTACHMENTS : BUCKET, AUGER, TRENCHER, TRAILER. EMAIL: TOOLMADAM@GMAIL.COM ––––––––––––––––––––––––––––––––
WANTED (PA): BROCE BROOM - ALL MODELS SWEEPER TRUCKS. LOOKING FOR LATE MODEL STREET SWEEPER WORK READY - PREFER STILL UNDER WARRANTY. EMAIL: BUCCIROCK@AOL.COM; PHONE: 215-518-6211 –––––––––––––––––––––––––––––––– WANTED (CA): USED MINI MOTOR GRADER. DON'T NEED THE LASER SYSTEM. JUST THE MINI MOTOR GRADER. EMAIL: SFKF36@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): LOOKING FOR HANIX DEALER TO SUPPLY NEW OR USED PARTS FOR HANIX N450 MINI GIANT. EMAIL: BANDIWILSON@SHAW.CA –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 314C LCR EXCAVATOR - I NEED A 36" HEAVY DUTY BUCKET WITH SIDE CUTTERS FOR MY CAT 314CLCR EMAIL: LAKENORMANLLC@GMAIL.COM PHONE: 917-208-5574 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): KOMATSU PC138USLC-8 EXCAVATOR EMAIL: GCESMARKETING8@GMAIL.COM PHONE: 657-549-4062 –––––––––––––––––––––––––––––––– WANTED (US): ALL MODELS CATERPILLAR EXCAVATORS. CAT 315, 320, 325, 330, 336 DL SERIES EXCAVATORS UNDER 9000 HOURS. EMAIL: REBUILD@TUSCO.NET PHONE: 330-987-3508 –––––––––––––––––––––––––––––––– WANTED (US): ALL MODEL CATERPILLAR EXCAVATORS, SELF-LOADING BATCHING VEHCLE 4CUBIC METRES EMAIL: JATOICO@GMAIL.COM PHONE: +923336758720 –––––––––––––––––––––––––––––––– WANTED (MT): ALL MODELS ROL-AIR AIR COMPRESSORS EMAIL: BROWNSFAN43920@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (TX): CATERPILLAR 330CL EXCAVATORS. WANTED TO BUY 5 UNITS CATERPILLAR 330CL NO MORE THAN 15000 HRS. EMAIL: RIZ@MEGAEQUIPMENTS.COM PHONE: 832-528-0786 –––––––––––––––––––––––––––––––– WANTED (US): ALL MODELS CASE IH AGRICULTURAL EQUIPMENT. LOOKING FOR NEW AND USED EQUIPMENT MANUALS OPERATOR,PARTS AND SERVICE MANUALS FOR AGRICULTURE AND CONSTRUCTION EQUIPMENT. EMAIL: WHITNEYJ65@YAHOO.COM PHONE: 530-864-0771 –––––––––––––––––––––––––––––––– WANTED: JCB ALL MODELS PUMPS. TRANSMISSION CHARGER PUMPS FOR CATERPILLAR/CASE /JCB/FORKLIFT ... PARTS 6Y3864 20/900400 20/925552 EMAIL: TREFLENEGOCE@GMAIL.COM; PHONE: +212661325283 ––––––––––––––––––––––––––––––––
WANTED: TEREX DIGGER DERRICK TRUCK. NEED A TRUCK CAPABLE OF DRILLING WITH A DOWN THE HOLE HAMMER ATTACHMENT FOR UTILITY POLE INSTALLATION IN ROCK/LEDGE. EMAIL: BOB.BRITTON@CHEROKEEDB.COM; PHONE: 860-747-8828 –––––––––––––––––––––––––––––––– WANTED: CASE 580K BACKHOE LOADER. LOOKING FOR CHEAP PARTS TRACTOR 580K CK OR EQUAL TO 1990 580K BACKHOE IN OR CLOSE TO SOUTHERN CALIF. EMAIL: HELIREDCAT@YAHOO.COM; PHONE: 760-636-9709 –––––––––––––––––––––––––––––––– WANTED: JOHN DEERE MODEL 624K WHEEL LOADER. ANY 624 HIGH LIFT. EMAIL: LPQ@EMAIL.COM; PHONE: 802-897-7915 –––––––––––––––––––––––––––––––– WANTED: JCB 270T SKID STEER LOADER NEED A VERSATILE SKID STEER ON TRACKS FOR THESE DIFFERENT USES PLUS ATTACHMENTS GRAPPLE BUCKET FOR TREE WORK, STUMP GRINDER. FOR EARTH AN MATERIAL MOVING AND LOADING INCLUDING ROCK, AND BACKHOE ATTACHMENT FOR DIGGING FOOTERS FOR RESIDENTIAL HOME BIULLDINGS AND SITE CLEAN UP AND PREP. FOR GRASS. PREFER USED. ALSO WILL NEED A DUMP TRAILER BIG ENOUGH TO HAUL THE SKIDSTEER. TRAILER CAN BE USED ALSO. EMAIL: HILLBRANNON9@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (IN CO): GENERAC GP8000 GENERATORS / GEN SETS / ENGINES. EMAIL: EIBERT@RTEBB.NET PHONE: 970-380-2651 –––––––––––––––––––––––––––––––– WANTED (IN USA): TAKEUCHI MODEL TB68S EXCAVATORS - LOOKING FOR BOTTOM ROLLERS MODEL TB-68S SERIAL NO 68003. EMAIL: TINBOX67@GMAIL.COM; PHONE: (707) 953-3040 –––––––––––––––––––––––––––––––– WANTED (IN CA): BOBCAT ALL MODELS SKID STEER LOADERS - LOOKING FOR AN OLDER MIDSIZED BOBCAT. DO NOT WANT TO PAY MORE THAN 20K. NEED BUCKET AND FORKS. EMAIL: PHLASHLITE2017@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (IN USA): VOLVO MODEL L90E WHEEL LOADER - LOOKING FOR GP PIN ON BUCKET FOR VOLVO L90E. EMAIL: ALR_666@OUTLOOK.COM; PHONE: 757-291-7666 –––––––––––––––––––––––––––––––– WANTED (IN MI): KOMATSU ALL MODELS EXCAVATORS - PC50MR LOOKING FOR 36-48 IN DITCHING BUCKET 50MM PINS 7 7/8 BOSSES WIDTH. EMAIL: OSTRUCKING@HOTMAIL.COM ––––––––––––––––––––––––––––––––
WANTED (IN USA): CATERPILLAR MODEL 330D EXCAVATORS - WANTED: CAT 330D 54" BUCKET. EMAIL: FRANKLURCH@YAHOO.COM; PHONE: 732-988-8814 –––––––––––––––––––––––––––––––– WANTED (USA): LOOKING FOR A USED PIN-ON OR JRB-STYLE COUPLER BUCKET FOR DEERE 524K LOADER <=$4,000. EMAIL: JMEISNER@CLBOYD.COM PHONE: 405-590-3459 –––––––––––––––––––––––––––––––– WANTED (USA): WE ARE LOOKING FOR A REPLACEMENT RADIATOR FOR OUR SCHRAMM AIR COMPRESSOR CIRCA 1965. IT IS A 125, MODEL COUH, SERIAL 115183. THE CORE DIMENSIONS ARE: 23" X 20" X 3". OUTLET DIAMETER IS 1-1/2" EMAIL: JAMESJNEVEINC@GMAIL.COM PHONE: 610-828-9869 –––––––––––––––––––––––––––––––– WANTED (USA): VERMEER T455 TRACK TRENCHERS, ANY CONDITION! EMAIL: RDEAN@ROADSIDE.BIZ PHONE: 757-880-0851 –––––––––––––––––––––––––––––––– WANTED (USA): WACKER NEUSON SAW BTS1035 ASPHALT / CONCRETE / PAVING. EMAIL: SCOTHOWER90@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (NC): ALL MODELS CATERPILLAR MOTOR GRADERS. EROPS, AC, 5 TO 7000 HOURS, TIGHT JOB READY. EMAIL: KEITHBROOKS@IRONPEDDLERS.COM PHONE: 800-438-1933 –––––––––––––––––––––––––––––––– WANTED (IN USA): LOOKING FOR ADD-ON COUNTERWEIGHT FOR A JOHN DEERE 27D. EMAIL: WAYNEO34@HOTMAIL.COM PHONE: 814-598-5907 –––––––––––––––––––––––––––––––– WANTED (IN USA): LOW HOUR 200-400 KW CATERPILLAR NATURAL GAS GENSET. EMAIL: MURPHREEWA@HOTMAIL.COM –––––––––––––––––––––––––––––––– WANTED (IN USA): VOLVO A40 WATER TRUCK 8000 TO 10000 GAL. EMAIL: JERRYSPLACE@GMAIL.COM PHONE: 770-681-5269 –––––––––––––––––––––––––––––––– WANTED (IN USA): ALL MODELS CONVENTIONAL TRACTOR TRUCKS. WHOLESALE TANDEM AXLE DAYCAB TRUCKS – MACK, FREIGHTLINER, KENWORTH OR PETERBILT. EMAIL: MARKETING@ERTRUCK.COM –––––––––––––––––––––––––––––––– WANTED (IN USA): ALTEC AGRICULTURAL EQUIPMENT, MODEL DR160A. ROUND BALE UNROLLER. EMAIL: RED_WKS@YAHOO.COM ––––––––––––––––––––––––––––––––
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 22, 2019 • Page 87
CONSTRUCTION EQUIPMENT, TRUCK, TRAILER AND FORESTRY AUCTION JUNE 11, 12, 13 • MONTGOMERY, AL, USA
(2) 2007 KENWORTH T800
(2) 2015 CATERPILLAR CP56B
(2) 2016 CATERPILLAR CS56B
(2) CATERPILLAR D9H
(3) CATERPILLAR 12H
(6) 2016 MACK GU713
(6) 2018 MACK GU713 ROLLOFFS
(19) 2019 KENWORTH T800
(20) 2019 MACK GU713
2003 CATERPILLAR D8R II
2005 PETERBILT 335
2006 CATERPILLAR 740
2007 VOLVO A40D
(5) CATERPILLAR 336EL
(2) 2009 CATERPILLAR D6T LGP
2009 KOMATSU HM400-2
2012 CATERPILLAR 329EL
2015 CAT 420F2
2015 CAT D8T
2015 CATERPILLAR 336FL
2015 JOHN DEERE 544K
2015 JOHN DEERE 650K LGP, RIPPER
2015 KOMATSU PC360 LC-10
2017 CATERPILLAR 326FL
2017 JOHN DEERE 700K LGP
2018 CAT 320 NEXT GEN
2018 MACK CHU613
2019 KENWORTH T880 TRI AXLE LOWBOY
2019 KENWORTH T880
CAT 365BL
Page 88 • May 22, 2019 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Inclement Weather No Issue for Jeff Martin Auctioneers
J
eff Martin Auctioneers were back at their Brooklyn, Miss., facility on Friday, May 10 and Saturday, May 11 for a two-day auction. With seasonal strong storms before sale days and intermittent showers during the sale, the weather didn’t faze the turnout, enthusiasm and overall success of this auction. Both days had phenomenal crowds and strong bidding on the internet with day one featuring aerials, construction equipment, road building machines, heavy duty trucks and trailers, and other miscellaneous support pieces. Day 2 featured farm tractors & equipment, pickup trucks, vehicles and tools.
Test operating a Cat 320CL excavator is local equipment dealer Jerry Cole of C & C Equipment, Inc., Hattiesburg, Miss.
The aged iron are still highly sought out machines. Looking at a few older pieces in the sale are (L-R): Richie Miska (in cab), Big Iron Equipment Sales, Meridian, Miss.; Jeremey Anderson, Waynesboro, Miss.; and Charles Whitney, Charles Land Development, Brooklyn, Miss.
A really nice selection of yellow iron rounds the corner and makes its way to the ramp for some rather fast paced bidding. Opening up a Bobcat T200 compact track loader of interest are Jimmy Wendt (L) and Elton Navarro of Blackfin Equipment Rentals, Morgan City, La.
Doing his research and attending the auction specifically to bid on machines for a contractor friend is Connley Hodge of Hattiesburg, Miss.
Wesley Gatwood (L) of Gatwood Southern Homes and James Gatwood of James Gatwood Timber, both based in Sumrall, Miss., talk about the lineup of machines in the sale.
Finishing up an inspection of a Cat D6N LGP of interest is Prentis Ladner, an independent equipment buyer/seller based in Poplarville, Miss.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 22, 2019 • Page 89
As Company Hosts Two-Day Sale in Brooklyn, Mississippi A couple incredibly busy final weeks of May for the staff of Jeff Martin Auctioneers with auctions coming up in Kissimmee, Fla., Wills Point, Texas, and Columbia, S.C., before month’s end.CEG
Discussing what excavators they plan to bid on are Chris Jones (L) and Jimbo Sullivan of Tim Jones Auto Truck & Tractor, Mendenhall, Miss.
The Brooklyn, Miss., sale has become a solid source for quality dump trucks and truck-tractors. This sale was no exception as a “slew” of Mack dumps were available to the highest bidder. Classified Rates:30 Words or Less for $40.00. Each Additional Word is $1.20. For just an additional $25 your ad can be posted on our online searchable database for 30 days Ad runs for 2 (two) insertions no changes in second insertion.
CLASSIFIEDS
Testing hydraulics and operation of some of the miniexcavators prior to sale time are John Steube (in cab) and Parker Bourque of Southern Lawncare & Excavation, Saucier, Miss.
The Easy Way To Advertise Your Equipment Run In Two Consecutive Issues – Black & White $130 • Color $190
PLEASE ENCLOSE PAYMENT WITH ORDER and mail to: 470 Maryland Drive• Fort Washington, PA 19034
215/885-2900 • Fax 215/885-2910 • Toll Free 1-800/523-2200 LOADERS Wheel Loaders
Subscribe to CEG today... Get an edge on your competition!
2018 Doosan DL300 - 5K US10 Wheel Loader, Good condition, 908 hours ......$247,900.
Construction Equipment Guide Southeast Edition subscribers are the best informed about construction news, construction equipment, sales, auctions, equipment prices, trends and changes in the industry and activities of its people. Call Toll Free! We now accept Visa, Mastercard & American Express!
SUBSCRIPTIONS:
(within United States & Puerto Rico Only)
One Year $65
CARDMEMBER’S NAME _________________________________________________________
Did this ad catch your attention? Color can work for you. Call Construction Equipment Guide 800/523-2200
Sentry Tires - Skid Steer and Wheel Loader Tires at Volume Buyers Prices! Call Company Wrench for Sizes & Pricing Call Jason Templeton 866-262-4181 11-12 EB
COMPANY NAME _______________________________________________________________
Gibson Machinery, LLC 440-439-4000
STREET____________________________________ PHONE NO. ________________________ CITY ______________________________________STATE _______ ZIP ________________
Check Enclosed
Doosan DL250-5-US10, S/N 10431, Good Condition, 100 hours ........................$179,900.
VISA
MASTERCARD
American Express
CARD NUMBER
SIGNATURE OF AUTHORIZED CARDHOLDER
TOLL FREE
440-439-4000
• Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 20 word description, plus contact and phone number.
• Either email your copy & photo to: production@cegltd.com, or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034. • Cost is $130 per ad, $60 additional for color.
EXP. DATE (Mo./Yr.)
®
Gibson Machinery
Here's how the BARGAIN ADS Work:
1-800/523-2200 FAX 215/885-2910
470 Maryland Dr. • Ft. Washington, PA 19034 Email: circulation@cegltd.com
• Your ad will run for two consecutive issues in 1 region.
Your Ad Will Be Seen By Over 21,969 Construction Equipment Buyers in the Southeast States.
For more information, call Construction Equipment Guide today at
800/523-2200
Page 90 • May 22, 2019 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
®
ADVERTISER INDEX To read articles about these CEG advertisers, visit www.constructionequipmentguide.com ALLU GROUP............................................................................................ 50
KOMATSU AMERICA CORP............................................................66,67,75
APPLIED MACHINERY SALES................................................................ 13
KPI-JCI...................................................................................................... 59
ASCENDUM MACHINERY INC.......................................................... 2,3,15
KUBOTA EXCAVATOR.......................................................................... 70,71
BANDIT INDUSTRIES INC.................................................................. 56,57
LAND EQUIPMENT INC............................................................................ 33
BARGAINS................................................................................................ 89
LEEBOY GROUP...................................................................................... 35
BEDROCK MACHINERY.......................................................................... 64
LINK-BELT EXCAVATORS.................................................................... 46,47
BRANDYWINE TRUCKS & EQUIPMENT..................................................30
LIUGONG CONSTRUCTION MACHINERY ............................................ 83
BROOKS SALES INC................................................................................ 33
MACKINNON EQUIPMENT & SERVICE.................................................. 19
C & K EQUIPMENT CO............................................................................ 20
MAGOTTEAUX INC.................................................................................. 54
CAROLINA CAT..................................................................................6,21,31
MAY - RHI.................................................................................................... 5
CEG SCALE MODELS.............................................................................. 78
MOBRO MARINE INC................................................................................63
CLASSIFIEDS............................................................................................ 89
NORAM................................................................................................ 80,81
CLEARSPAN FABRIC STRUCTURES...................................................... 33 CON-EQUIPMENT OF THE CAROLINAS................................................ 14 CONSTRUCTION EQUIPMENT GUIDE.................................... 37,40,48,86 DEUTZ CORPORATION............................................................................ 14 DITCH WITCH OF TENNESSEE.............................................................. 19 DOOSAN.................................................................................................... 27 DOOSAN PORTABLE POWER................................................................ 72 DRESSTA NORTH AMERICA.................................................................... 82 EARTHMOVERS........................................................................................ 29 EQUIPMENT CORP OF AMERICA............................................................30 FAE USA INC............................................................................................ 50 FECON........................................................................................................ 6 FELLING TRAILERS.................................................................................. 44 FLANGE LOCK.......................................................................................... 38 GEHL.......................................................................................................... 68
POWERSCREEN MID-ATLANTIC............................................................ 53 RICHARDSON SERVICE 1991 INC.......................................................... 10 RITCHASON AUCTIONEERS....................................................................85 ROSCO GROUP........................................................................................ 39 RUBBLE MASTER AMERICAS CORP...................................................... 54 SAGE OIL VAC.......................................................................................... 44 SANY AMERICA INC............................................................................ 22,23 SCREEN MACHINE INDUSTRIES............................................................ 51 TEREX CRANES........................................................................................79 TEREX FUCHS.......................................................................................... 69 TEREX TRUCKS/VOLVO.......................................................................... 43 THOMPSON MACHINERY USED PARTS................................................ 62 TOWMASTER INC..................................................................................... 42 TRACTOR TRACS INC.............................................................................. 62
GROVE WORLDWIDE.............................................................................. 73
TREKKER GROUP.................................................................................... 11
GSE GREAT SOUTH EQUIPMENT............................................................ 9
TRENCH SHORING SERVICES................................................................36
HILLS MACHINERY.................................................................................. 92
WILCOX TRACTOR SALES INC.............................................................. 26
HITACHI CONSTRUCTION MACHINERY .......................................... 76,77 HYUNDAI CONSTRUCTION EQUIPMENT.......................................... 16,17
ALABAMA SUPPLEMENT
ISUZU DIESEL.......................................................................................... 26
COWIN EQUIPMENT CO INC.................................................................... 5
JAMES RIVER EQUIPMENT -BEALS........................................................ 7
GORILLA HAMMERS.................................................................................. 1
JM WOOD AUCTION
HEAVY MACHINES INC............................................................................ 11
MONTGOMERY AL.......................................................................... 87
JCB OF ALABAMA...................................................................................... 9
JOHN DEERE............................................................................................ 91
STONE EQUIPMENT CO INC.................................................................... 3
KLEEMANN................................................................................................ 55
THOMPSON TRACTOR CO.................................................................... 6,7
KOBELCO CONSTRUCTION MACHINERY ............................................ 65
TRACTOR & EQUIPMENT CO INC.......................................................... 12
The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.
CoNsTRuCTIoN EquIpmENT GuIDE • www.constructionequipmentguide.com • may 22, 2019 • page 91
GET MORE DONE WITH ON NE. Why run two macchines when one will do? Whether W you’re loading trucks, busting up blacktop, placing pipe, digging trenches, or moving materials, an LL--Series Backhoe is more than up to the task. By listening and reesponding to our customerss, these versatile machines feature f improved hydraulic systems for additional lifft capability and supeerb multifunction performan nce. And rugged EPA Final Tier 4/EU Stage IV V diesel engines* meet rigid emission regulations, enabling work in nonattainment areas. The result: our most versatile backhoess ever. Ta Take advantage g of un nrivaled capability. p y *Interim Tier 4/Stage IIIB on the 310L EP.
Beard Equipment Company
CoasTaL EquIpmENT
Mobile, AL 251/456-1993 Pensacola, FL 850/476-0277 Freeport, FL 850/835-3337 Panama City, FL 850/769-4844 Tallahassee, FL 850/575-5600 Perry, FL 850/584-9200 Jacksonville, FL 904/296-5000 Lake City, FL 386/752-9544 Palatka, FL 386/325-6268 Ocala, FL 352/732-4646
Virginia Beach, VA 757/424-1900
www.beardequipment.com
www.coastalequipment.net
Yorktown, VA 757/898-1900
Dobbs Equipment
www.dobbsequipment.com Riverview, FL (Main Office) 813/620-1000 Fort Myers, FL 239/334-3627 Lutz, FL 813/995-0841 Miami, FL 305/592-5740 Orlando, FL 407/299-1212 Pompano Beach Parts, FL 954/977-9541 Riverview Parts, FL 813/621-4902 Sarasota Parts, FL 941/960-2004 West Palm Beach, FL 561/848-6618
FLINT Construction & Forestry Division www.flintequipco.com
Dothan, AL 334/794-8691 Troy, AL 334/566-4181 Adairsville, GA 770/773-9857 Albany, GA 229/888-1212 Atlanta, GA 404/691-9445 Braselton, GA 770/965-1889 Brunswick, GA 912/264-6161 Columbus, GA 706/687-3344 Grovetown, GA 706/855-5440
Macon, GA 478/788-1586 Savannah, GA 912/964-7370 Valdosta, GA 229/474-6680 Andrews, SC 843/221-4940 Aynor, SC 843/358-5688 Ladson, SC 843/572-0400 Simpsonville, SC 864/963-5835 Walterboro, SC 843/539-1420 West Columbia, SC 803/794-9340
mEaDE TRaCToR
www.meadetractor.com Bowling Green, KY 270/842-3400 London, KY 606/862-8447 Louisville, KY 502/253-3721 Richmond, KY 859/623-2030 Chattanooga, TN 423/855-0633 Kingsport, TN 423/349-5001 Knoxville, TN 865/546-3207 LaVergne, TN (Nashville) 615/501-8600
Page 92 • May 22, 2019 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
MIGH HTY PERF FORMAN NCE COMP PA ACT FO OOTPRIN NT
Operating Weight – 7,990 lb Engine Power – 24.4 hp
The CASE CX37C delivers the greatest power and performance of any CASE mini excavator that can still be towed behind a truck without requiring special licensing.* The adjustable boom and minimum tailswing allows for work in confined applications to help owners get the mos m t out of their investment. Contact Hill ills Ma achinery to Add d a CASE CX X37C C to o Your Flleet Today! www.hilllsmachin i ery.com
QUALITY USED U EQUIPME ENT FROM HILL LS MACHINERY
O P F
O P F
O P F
2012 Case SV212 84” smoooth drum roller,,
2015 Casee CX210C 2 wayy auxiliaryy hydraulics y s,,
2019 EDGE TS80, EROPS, 2373MANUFACTURING hours. RO7248 ..............$64,000 12 HRS, 40 STACKER, 40" 3 PLY BELT, HD CRAWLER TRACKS.................. $CALL
2014 CASE DOZER, hydraulic thumb. t 2050M FreshCRAWLER service, including new LGP, 36" bbushings. OPEN GROUSERS, POWER TILT pins and EX2865.................$105,000 BLADE, CAB, HVAC...................... $99,000
North Carolina Charlotte
O P F
2016 TTere erex Finlayy 883+ 9.16 CY hopper, pp ,
2016 CASE CX145C, 349 HRS, STRICK48” conveyor, 32” middle graade conveyor, LAND MANUAL AUXILIARY 32” fines conveyor.COUPLER, CS6573................$217,700 HYDRAULICS............................ $130,000
2016 Edge g TRM622 Trommel Trommel 48” feeder belt,,
2014 CASE CX160C, 937 HRS, 60” collection belt, 42” oversize belt,AUX 42” radial HYDRAULICS, WELDradio ON HYDRAULIC fines belt, 7/8 function remote control. THUMB........................................ $93,5000 CS0276 ..............................................$202,880
South Carolina Greensboro
Greenville
Raleigh
Columbia
Charleston
Greenville
11717 Reames Rd 2901 Manufacturers Rd 415 Belvoir Hw wy 1501 Hedingham Blvd 1014 Atlas Way 7168B Cross County Rd 11 Dixie Circle Charlotte, NC 28269 Greensboro, NC 27406 Greenville, NC C 27834 Raleigh, NC 27604 Columbia, SC 29209 N. Charleston, SC 29418 Greenville, SC 29605 Ph. 704-208-5564 Ph. 336-308-3045 Ph. 252-752-77145 Ph. 919-746-7938 Ph. 803-658-0200 Ph. 843-225-9377 77 Ph. 864-546-5208
www.hillsmachinery hillsmachinery.com *Always check vehicle capacities and statee or local laws for applicable roading regulations and requirements. ©2019 Hills Machinery Co. All rights reserrved. CASE is a trademark registered in the United States and many other countries, owned by or licensed to CNH Industrial N.VV.,., its subsidiaries or affiliates.