The massive, multi-phase highway construction project known as the Mountain Parkway Expansion (MPE) is moving closer to completion, as crews mark yet another milestone. Work has begun on the final and longest segment, which will connect Salyersville to Prestonsburg, Ky.
“Breaking ground on Magoffin-Floyd is a historic moment,” said Aric Skaggs, Kentucky Transportation Cabinet (KYTC) project manager. “This marks the start of the last chapter in completing the 45-mile, transformational eastern Kentucky infrastructure project.
“Gov. Andy Beshear, who has made the Mountain Parkway a top priority of his administration, hosted the groundbreaking ceremony in August. More than 100 people attended the historic event, including federal, state and local officials.”
see PARKWAY page 54
Navigating Mounting Risks
Insurance Providers, Contractors Look for Solutions to Mitigate Risks
By Lucy Perry CEG CORRESPONDENT
Contractors continue to face tough conditions where risk is concerned. Labor issues, contract challenges, logistics headaches and economic volatility all plague business owners. These issues hamstring insurance providers as well, believe it or not. Both sides of the insurance desk are getting crafty in searching for coverage solutions to even the most complex and highest-risk transportation construction projects.
Adobe Stock photo
Kentucky Transportation Cabinet photo
8 ILLINOIS DOT CREWS EXTEND LIFE OF I-24 OHIO RIVER BRIDGE
A three-year, $38 million project on the I-24 Ohio River bridge is expected to extend the life of the 52-year-old structure until the Illinois Department Transportation (IDOT) can build a new one.
12 HAYDEN-MURPHY’S ‘CARS & CRANES’ RAISES $10K FOR ST. JUDE’S
Hayden-Murphy Equipment hosted its first Cars & Cranes event on Sept. 13 at its Twin Cities location 9301 E. Bloomington Fwy. in Minneapolis, Minn., and will donate $10,000 to St. Jude Children’s Research Hospital.
AGC Minnesota’s (AGCMN) 26th annual AGC Sporting Clays fundraiser was a sold-out success. On a perfect fall day, 240 shooters participated on Sept.10 at the Minnesota Horse & Hunt Club in Prior Lake, Minn.
18 KSM HOSTS LINK-BELT’S ‘DIGGIN’ FOR A CURE’ TOUR IN ST. LOUIS
Kirby-Smith Machinery participated with Link-Belt Excavators as one of the featured stops on its “Diggin’ for a Cure — Pink-Belt Tour.” To mark the occasion, KSM held a customer appreciation event on Sept. 9, 2025, in St. Louis.
22 PALFINGER OPENS ITS NEW PARTS DISTRIBUTION CENTER IN CHICAGO
The strategic $15 million investment is designed to deliver parts faster, reduce equipment downtime and strengthen service for dealers and customers across the United States, Canada and Mexico.
26 ROLAND WELCOMES GUESTS TO
CUSTOMER APPRECIATION DAY
Roland Machinery Co. held a customer appreciation event at its facility at 6450 Melton Rd., in Portage, Ind., on Sept. 11. In addition to lunch, guests had the chance to see the latest construction machinery up close.
30 NUSS COLLECTION HOSTS OPEN HOUSE IN ROCHESTER, MINN.
For Bob Nuss of Nuss Truck and Equipment, knowledge of Mack trucks and the fleet industry have been a staple of his family since 1923; starting with Charles, who became a Mack dealer in 1959.
THIS ISSUE
MIDWEST EDITION
30 MGX REBRANDS ASPEN TO ‘UPFITS BY ASPEN EQUIPMENT’
MGX Equipment Services is growing its footprint in the central United States, rebranding its Aspen Equipment facilities in Minnesota, Iowa, Nebraska and Missouri to the MGX Equipment Services brand.
36
BOBCAT TO SHOWCASE VERSATILITY, PERFORMANCE AT UTILITY EXPO
Alongside its trusted lineup, Bobcat will showcase some of its most recent additions — including the MT120 mini-track loader and the land management package, exclusive to the T86 compact track loader.
55
SAKAI PRODUCES 1,000TH SV544 SOIL COMPACTOR IN GEORGIA
Sakai America Inc. announced a milestone with the production of its 1,000th SV544 soil compactor at its Adairsville, Ga., factory. The specific machine, an SV544TBCF model is heading to Power Motive.
72 TRIMBLE ANNOUNCES MARTIN EQUIPMENT AS TECHNOLOGY OUTLET
Martin Equipment will sell Trimble grade control, site positioning systems and correction services technology directly to customers using John Deere and Wacker Neuson earthmoving equipment.
91 NEL
The National Equipment League (NEL) has launched its third season with two events now available to view online, and new apps and channels launching to expand the league’s viewership.
This year’s event featured more than 1,200 lots and drew bidders from across North and South America. Buyers were able to participate both in person and online through DSAauctions.com.
2018 HAMM HD10VO $25,555 STK# HM17083, 302 HRS, Bolingbrook, IL
2019 Komatsu PC170LC-11 $127,500 stk# ARCons 4040 hours, Carterville, IL
2021 VOLVO EC750EL $359,500 STK# VO2024002, 6329 HRS, Escanaba, MI
2021 Takeuchi TL12R2, S/N 412104134 2883 Hours, CAB/AIR/HEAT, TWO SPEED, HIGH FLOW HYDRAUICS, HYDRAULIC COUPLER, 84" GP BUCKET $44,900
2022 Case SV280B, 171 Hours, S/N JAFSV280HMM403668, CAB/AIR/HEAT, HYDRAULIC COUPLER, 72" GP BUCKET, 2 SPEED, RADIO, EXCELLENT CONDITION FULL MACHINE WARRANTY UNTIL 11-22-24 $47,000
Mike Garrard • (630) 492-9115 Bolingbrook, IL Contact us at Used@McCannOnline.com
our complete Used & “Like New” inventory at McCannOnline.com
2022 Case 521G, S/N 253822, 266 Hours, CAB/AIR/HEAT, RIDE CONTROL, THIRD VALVE, LIMITED SLIP DIFF, JRB COUPLER2.5 YARD GP BUCKET, DELUXE CAB .. $129,900
2022 Case 321F, S/N NNHP04331, 241 Hours, CAB/AIR/HEAT, HIGH SPEED TRANSMISSION, SKID STEER STYLE COUPLER, 1.7 cu yd BUCKET, LIMITED SLIP DIFFERENTIAL, THIRD VALVE HYDRAULICS TIRES LIKE NEW, PREMIUM CAB $82,500
2023 Case TV370, S/N 2023 Case TR370B, 176 Hrs, CAB/AIR/HEAT, HYDRAULIC COUPLER, 84" GP BUCKET, DELUXE CAB, PREMIUM DISPLAY PANEL, GOOD TRACKS
$72,500
2019 Case Cx130D, S/N DAC130K7NKS7D1558, 358 Hours, CAB/AIR/HEAT, HYDRAULIC COUPLER, 18" BUCKET, AUX HYDRAULICS
$109,900
2023 Case TR270B, S/N JAFTR270LNM421971, 281 Hours, CAB/AIR/HEAT, E-H CONTROLS, HYDRAULIC COUPLER, 78" GP BUCKET, RIDE CONTROL, SELF LEVEL, HIGH FLOW HYDRAULICS, REARVIEW CAMERA, PREMIUM DISPLAY MODULE, FULL MACHINE WARRANTY UNTIL 1-30-25, JUST SERVICED READY TO GO $54,900
2018 Case CX245DSR, S/N NJS7K1152, 1306 Hours, Cab/Air, Kent Coupler, Aux Hydraulics, No Bucket, Bucket available at additional charge, Rental Fleet Roll Out
McCann Rents a full line of heavy and light construction equipment. Call us today to supply your next rental.
LIEBHERR L550 XPOWER, (’17), 2,722 Hrs, innovative machine concept which combines performance, fuel efficiency, robustness and comfort. Power split driveline, #C003118 $125,747
LIEBHERR R924 LITRONIC, (‘23), 10 Hrs, The R 924 (Tier IV) crawler excavator replaces the predecessor R 924 (Gen 6) model. Its completely updated design is characteristic of the new range of "generation 8" machines, #C005679 $CALL LIEBHERR R934 LITRONIC, (‘23), 485 Hrs, The new R934 weighs approx. 35 tons, completely updated design is characteristic of the new range of "generation 8" machines, #C005399 $CALL
$1,099,000
GROVE GHC130, (’19), 932 Hrs, 130-ton lift capacity, #C004141
LIEBHERR R936 COMPACT LITRONIC, (‘18), 1,042 Hrs, Convenient and service-friendly, the R 936 Compact makes for safe working. With its tight slewing radius, this machine is especially well suited to urban applications, #C003377$CALL
$679,552
GROVE GRT880, (’22), 807 Hrs, 80-ton lift capacity, #C005002
GROVE GRT880, (’18), 2,476 Hrs, 80-ton lift capacity, #C004982
Illinois DOT Crews Extend Life of I-24 Ohio River Bridge
By Lori Tobias CEG CORRESPONDENT
A three-year, $38 million project on the I24 Ohio River bridge is expected to extend the life of the 52-year-old structure until the Illinois Department Transportation (IDOT) can build a new one.
“Plans are under way to replace this bridge in the next 20 years,” said Ben Willis, construction engineer, IDOT District 9. “This is a four-lane structure, and we’re moving rapidly toward needing six lanes at this location due to the increase the traffic. We’re in phase one studies to build the new structure, but it’s probably 20 years before construction is complete. So, because it takes so long to build a new bridge, we need to get this thing to its end of life.”
Work in the first phase, which began in the spring of 2025, included the installation of a new deck overlay, replacement of expansion joints, repairs to structural steel, painting the bridge and resurfacing the pavement.
The work called for lane closures, a significant challenge due to the high traffic of an average of 34,000 cars daily, and limited space. The bridge is 19 spans and 5,560 ft. long.
“Lane closures are separated by concrete barriers,” Willis said. “We have two 12-foot lanes in each direction with three-foot shoulders. So, when we get the barrier out there for protection, it’s narrow. The barrier takes up two feet. That’s one of the other challenges, managing structures built in the ‘60s. They don’t have the same standards that we have today, which we would build them on with three-foot shoulders. I would say that an additional challenge, along with the traffic volumes, it’s just the narrowness of the bridge.”
But alerting drivers to the narrow passage can also cause its own problems, namely causing drivers to slow down when it’s not necessary and causing accidents.
IDOT has made traffic management a priority, early on alerting travelers to the coming changes.
“I ran a campaign prior to the project to get people acclimated to how it works,” said Dawn Johnson, IDOT spokeswoman. “We have a lot of tools to mitigate traffic backups as much as possible, such as signage that will shoot out messages in advance of drivers getting to places where there is congestion. We’ve also worked in conjunction with other partners when it comes to making sure we’re reducing the speed. We wanted to make sure that people are aware — stay focused; keep the phones down; slow down; give the car ahead space.”
Illinois Department of Transportation District 9 photo
The bridge is 19 spans and 5,560 ft. long.
So far, the state’s efforts seem to be paying off, Willis said.
“This is a high accident location even in normal configuration. The last time we did work on this segment, there were even some fatalities. This was our biggest concern. So far, we’re seeing positive results.”
Another challenge, also due to the narrowness, is restrictions on heavy equipment.
“We have limitations for how much heavy stuff we’re putting on the bridge deck,” Willis said. “So, when we’re building the expansion joints, that’s a lot of hand work with jack hammers, possibly a steamer on a smaller skid steer. We’re not using cranes. We’re not using track hoes. The cool thing is there’s a cable-driven scaffold system underneath the structure that gives access to some structural steel repairs for the joints. It’s a working platform for the workers to get
Illinois Department of Transportation District 9 photo
“Plans are under way to replace this bridge in the next 20 years,” said Ben Willis, construction engineer, IDOT District 9.
underneath the bridge.”
Work on the first phase will end in the fall, then resume in the spring of 2026. Year two will involve placing traffic on crossovers on one side of the structure to the other so crews can apply a micro silica overlay. Year three will be finishing the remaining miscellaneous tasks, with completion set for September 2027.
The project is part of improvements IDOT is planning for the coming years, including improving 3,200 mi. of highway and nearly 9 million sq. ft. of bridge deck. It’s all part of Rebuild Illinois, which is investing $33.2 billion into all modes of transportation. Recent completed projects include approximately $16 billion in improvements statewide on 6,541 mi. of highway, 686 bridges and 986 additional safety improvements. CEG
Illinois Department of Transportation District 9 photo
A three-year, $38 million project on the I-24 Ohio River bridge is expected to extend the life of the 52-year-old structure until the Illinois Department Transportation (IDOT) can build a new one.
715-752-8112
JD 50G, A/C, Hyd Thumb, 5’7” Long Arm, Blade, Aux, #292872 ......................................$45,000
Kubota KX057-5, A/C, Hyd Thumb, Angle Blade, Aux Hyd, #296470 ........................$76,000
JD 544K-II, A/C, Rev Fan, 20.5 Tires, Air Seat, GP Bucket, #262551 $127,000
JD 245G, A/C, Aux Hydraulics, 9’7” Arm, 32” Shoes, Air Seat, #262242 ......................$198,000
JD 325G, A/C, Joysticks, 2 Speed, Aux Hyd, #293433 ......................................$52,000
Komatsu HM400-3, A/C, 40 Ton, Tailgate, Bed Heater, #262951 $165,000
JD 624L, A/C, 3rd Spool, Ride Control, Roll Out BKT, Rev Fan, #292312 $85,000
Hayden-Murphy’s ‘Cars & Cranes’ Raises $10K for St. Jude’s
Hayden-Murphy Equipment hosted its first Cars & Cranes event on Sept. 13 at its Twin Cities location 9301 E. Bloomington Fwy. in Minneapolis, Minn.
Billed as a fundraiser for St. Jude’s, a $10 entry fee was charged for anyone who wanted to bring their vehicle or bike, while spectators entered free. Hayden-Murphy matched all donations up to $5,000.
Guests were treated to donuts and coffee, and every participant had the chance to win prizes, including a jump pack and flashlight. Event goers also had a chance to look over the equipment in the Hayden-Murphy yard.
“Our Cars & Cranes event was an absolute success,” said Matt Thiele, parts manager of Hayden-Murphy. “A huge thank you to our entire team, volunteers and community for the incredible support — this truly was a team effort from start to finish. We couldn’t have done it without you.”
Highlights of the day included:
• 94 vehicles on display
• more than 250 guests attended
• more than 20 volunteers
• 102 T-shirts sold
• $4,385 raised by attendees
• $10,000 will be donated to St. Jude Children’s Research Hospital
“We are beyond grateful for everyone who helped make this possible,” said Thiele. “Thank you again. We’re already looking forward to making Cars & Cranes an annual tradition.”
For more information, visit hayden-murphy.com. CEG
Hayden-Murphy photo
Hayden-Murphy Equipment hosted its first Cars & Cranes event on Sept. 13
Hayden-Murphy photo
This 1934 Ford was just one of the 94 vehicles on display at Hayden-Murphy’s Cars & Cranes fundraising event.
Hayden-Murphy photo
The fundraiser for St. Jude’s had a $10 entry fee for anyone who wanted to bring their vehicle or bike.
Hayden-Murphy photo
More than 250 guests attended, helping to raise $4,385. Hayden-Murphy matched for a grand total of $10,000 donated to St. Judes Children’s Hospital.
Hayden-Murphy photo
The American flag was raised high above the event.
Hayden-Murphy photo
A total of 94 vehicles were on display at HaydenMurphy’s Cars & Cranes event.
Hayden-Murphy photo
“Our Cars & Cranes event was an absolute success,” said Matt Thiele, parts manager of Hayden-Murphy.
MID COUNTRY MACHINERY
3410 Henry St SW Bondurant, IA 50035 515-454-8626
3509 Franklin St SW Bondurant, IA 50035 515-410-9900
DODGE 3478 5th Ave South Fort Dodge, IA 50501 515-574-2302
BLUFF 112 8th St Sergeant Bluff, IA 51054 712-943-4470
9206 Brewerton Rd Brewerton, NY 13029 315-288-6473
KOBELCO SK 210LC-11 EXCAVATOR, 321 HRS
2019 KOBELCO SK260LC-10 EXCAVATOR, 2797 HRS
KOBELCO SK260LC-11 EXCAVATOR, 145 HRS
LINKBELT 135 SPIN ACE, 5666 HRS
145X4DZ, 2044 HRS
LINKBELT 145X4DZ EXCAVATOR, 239 HRS
2024 LINKBELT 145X4DZ EXCAVATOR, 91 HRS
2025 LINK-BELT 145X4DZ EXCAVATOR, 0 HRS
ZX17U-5N MINI EXCAVATOR, 47 HRS
$CALL 2025 ZX17U-5N MINI EXCAVATOR, 0 HRS $CALL 2025 ZX35U-5N MINI EXCAVATOR, 90 HRS
$24,500 (2) Balderson Broom Attachment for Cat IT Machines, 8' wide, good condition $4,000 Ea. NUMEROUS Rivinius R600’s, 10’ Wide, Mount on Dozer Blade
Komatsu D155AX-6, 2007, Sigma S-U Blade, 4-bbl Single Shank Ripper, 8,400 HMR
$229,500
Over 100 Excavator, Loader, Specialized & Grapple Buckets in Stock -Call For Your Needs FORKS (8) IT28F/G Forks, Balderson qc, 48"-60" pallet style, excellent $4,000 Others Available Call Prices Are Negotiable - At Your Inspection
AGC Minnesota’s (AGCMN) 26th annual AGC Sporting Clays fundraiser was a sold-out success. On a perfect fall day, 240 shooters participated on Sept. 10 at the Minnesota Horse & Hunt Club in Prior Lake, Minn.
Thousands of dollars were raised for the AGCMN Foundation, which provides scholarships to young people pursuing careers in the construction industry. This year’s tournament featured raffles for four guns, and an amazing assortment of raffle and silent auction items to bid on.
Congratulations to Top Team — Grazzini Brothers with their score of 452; Top Woman — Amanda Meinholz of Kraus-Anderson Insurance for her score of 81; and Greg Grazzini (Grazzini Brothers & Company) and Ben Portillo (Northland Concrete & Masonry) for tying for the Top Gun award with their score of 97.
To see the complete set of photos, use the QR code or visit flic.kr/s/aHBqjCurz6.
For more information, visit agcmn.org.
(All photographs in this article courtesy of AGC of Minnesota.)
(L-R): Greg Grazzini of Grazzini Brothers; Hunter Nielsen of Mortenson; Jon Edge of McPhillips Sweeping; Guido Gliori of Grazzini Brothers; and Jake Boerboon of Kraus-Anderson, took the Top Team Award with a combined score of 452.
Sponsored by Kraus-Anderson, the bingo board offered participants the chance to win a cash prize of $500 or a Tristar Trinity shotgun.
Seven of the 2025 AGC of Minnesota scholarship recipients were on hand at the Sporting Clays Fundraiser, which is the AGC of Minnesota Foundation’s primary annual fundraiser for scholarships. Most scholarship recipients attended the golf tournament in August.
Eddison Saywon (C), one of two Kraft Family Scholarship recipients of 2025, poses with Arne and Jane Kraft. The Kraft Family Scholarship is the first AGC of Minnesota endowed scholarship, presented by the Kraft family in honor of Arne Kraft’s 90th birthday this year. For more information on the AGC of Minnesota foundation, visit agcmn.org/foundation.
Tournament participants bought lunch bags of raffle tickets to spend on various raffle prizes.
Ben Portillo (L) of Northland Concrete & Masonry and Greg Grazzini of Grazzini Brothers & Company tied for Top Gun with a score of 97.
Amanda Meinholz of Kraus-Anderson Insurance took the Top Woman award with a score of 81.
KSM Hosts Link-Belt’s ‘Diggin’ for a Cure’ Tour in St. Louis
Kirby-Smith Machinery (KSM) participated with Link-Belt Excavators as one of the featured stops on its “Diggin’ for a Cure — Pink-Belt Tour.”
To mark the occasion, KSM held a customer appreciation event on Sept. 9, 2025, at its St. Louis facility, complete with complimentary merchandise, barbeque and a silent auction to benefit breast cancer awareness initiatives. The tour also stopped at KSM’s Kansas City, Mo., location on Sept. 11.
The Pink-Belt — a Link-Belt 145X4 excavator, painted pink — is on a nationwide tour to raise awareness and money to support breast cancer research. The machine will be auctioned off at ConExpo 2026 in March. Since 2012, Link-Belt has raised more than $1million to support the cause.
“Kirby-Smith Machinery has a long history of supporting initiatives that promote research and awareness for breast cancer,” said Jeff Weller, chief operating officer of KSM. “We greatly appreciated the efforts of our manufacturing partners and customers to help raise money for a great cause.”
For more information, visit LBXCO.com/pinkbelt and kirby-smith.com. CEG
(All photographs in this article are Copyright 2025 Construction Equipment Guide. All Rights Reserved.)
Robert Cloud of Magni demonstrates the features of this Magni 16.10 telescopic telehandler, which is ideal for safely moving large, bulky loads.
(L-R) are Matt Heisel, used equipment manager, KirbySmith Machinery; Steve Aulbach of Infrastructure Management; and Bo Ross, general manager of used equipment, Kirby-Smith Machinery.
One of the many machines on display was this Grove RT9130E-2 rough-terrain crane. This crane is designed for the toughest conditions and offers lift capacities from 30 to 160 tons.
Casey Hodges (L) of Budrovich and John Stallons of Kirby-Smith Machinery enjoyed some refreshments during the customer appreciation event.
(L-R): P&M Excavating’s Rob Malone, Robert Malone and Jim Adkirson looked over these Link-Belt excavators.
Attendees had a chance to view this Link-Belt 490 X4 excavator with a Genesis GXT775R mobile shear attachment.
Shane Schartau (L) of KirbySmith Machinery catches up with Joel Crum of Associated Wire Rope and Rigging.
This Link-Belt 350 X4 excavator comes with Precision Grade, enabling operators of all skill levels to increase productivity. This machine was shown with a Strickland grapple attachment.
Jeff Powell (L) of Genesis Attachments met up with Ted Ahrens of Ahrens Excavation and Demolition.
Matt Kelley (L), president of Kelley Excavating, talks with George Fram, product support of KirbySmith Machinery.
Tony Pona (L) of Budrovich and Rickey Bailey vice president, crane division of Kirby-Smith Machinery enjoyed lunch at the event.
Link-Belt is Diggin’ for a Cure, with its “Pink-Belt” 145X4 excavator with an Esco bucket. Link-Belt has raised more than $1 million since 2012. The Pink-Belt is traveling to participating dealers around the country and will be auctioned at ConExpo 2026. For more information, visit LBXCO.com/pinkbelt.
(L-R) are Rob Faulkner of Kirby-Smith Machinery; Clay Mothershead of Oakley St. Louis; Steve Schutte of Oakley St. Louis; and Larry Kohler of Kirby-Smith Machinery.
JP Cotton (C) of Kirby-Smith Machinery talks with Mike Baumann (L) and Brad Franke of Barnhart Crane and Rigging.
Chris Ware (L) of Kirby-Smith and Andy Elam of Wood River Refinery with the “Pink-Belt” excavator fitted with an Esco bucket. The machine will be auctioned off at ConExpo 2026 to raise money for breast cancer support.
THE BEST PARTS ALL IN ONE PLACE THEB PAR E N A BESTPPARTS TS
Palfinger Opens Its New Parts Distribution Center in Chicago
A ceremonial ribbon cutting marked the opening of Palfinger’s new Parts Distribution Center, featuring (L-R): Thimo Schulz, L.I.T. CEO; Fokke Fels, L.I.T. chairman of the board; Dave Larson, Palfinger consultant; Gerhard Sturm; Palfinger SVP, global sales and service; Andreas Klauser, Palfinger CEO; Village of Huntley Mayor Timothy Hoeft; Ismael Daneluz, Palfinger vice president of sales and service, North and Latin America; Balthasar Gwechenberger, Palfinger vice president, global after sales; Florian Kaiser, regional director, after sales; and David Kovamees, regional senior manager, spare parts.
Palfinger has officially opened its new North American Parts Distribution Center in Huntley, Ill. The strategic $15 million investment is designed to deliver parts faster, reduce equipment downtime and strengthen service for dealers and customers across the United States, Canada and Mexico.
Strategic Location, Smarter Operations
Expanding Service Capabilities
The new Parts Distribution Center operates as the central hub for Palfinger’s spare parts operations in North America, complementing the company’s growing online parts ordering system.
Located near Chicago’s major interstate corridors, O’Hare International Airport and Rockford’s cargo hub, the 177,000-sq.-ft. modern indoor space stocks more than 60,000 spare parts for Palfinger’s full North America product range, including knuckle boom cranes, bucket trucks, truck-mounted forklifts, service cranes, hooklifts, cable hoists and timber and refuse loaders.
“The new Huntley facility demonstrates how focusing on service and finding ways to better support customers are key strategies for us in North America,” said Ismael Daneluz, vice president of sales and service of North and Latin America. “We’re pairing this facility with innovations in service delivery, from offering virtual reality training and other digital resources to growing our mobile service fleet. Our focus is simple: get customers what they need when they need it, and keep their equipment working at peak performance.”
Opening Celebration
An advanced AutoStore robotic system picks parts with speed and accuracy, enabling faster turnaround and greater reliability. At full capacity, the center is expected to process 75,000 shipments annually in partnership with L.I.T., Palfinger’s longstanding global logistics provider.
The grand opening coincided with the 2025 Palfinger North America Dealer Conference, uniting close to 200 dealers, partners and company leaders under the motto Connected by Service, Driven by Excellence. Guests toured the facility, experienced live equipment demonstrations and interactive activities, including a virtual reality crane simulator.
“Service is a growth driver for Palfinger, and North America is one of our important markets,” said Palfinger CEO Andreas Klauser. “The Huntley facility is a major investment in keeping our customers up and running. It’s about speed, reliability and demonstrating our commitment and confidence to this region. It’s also bringing our global standard of service even closer to our dealers and customers.”
Palfinger aims to double its global parts and service revenue by 2030 through targeted investments in service infrastructure worldwide. In North America, Palfinger’s goal is to reach $1 billion in revenue by the end of the decade and become the region’s top provider of lifting solutions, while setting the standard for service excellence.
Palfinger photo
PLEASE CONTACT YOUR LOCAL DEALER:
ILLINOIS
Roland Welcomes Guests to Customer Appreciation Day
Roland Machinery Co. held a customer appreciation event at its facility at 6450 Melton Rd., in Portage, Ind., on Sept. 11.
In addition to lunch, guests had the chance to see the latest construction machinery up close, including the Komatsu PC22LC excavator, a Komatsu WA 475 wheel loader, a Hamm HD12 tandem roller, a LeeBoy 1000G asphalt paver and more. For more information, visit rolandmachinery.com. CEG
(All photographs in this article are Copyright 2025 Construction Equipment Guide. All Rights Reserved.)
The Komatsu PC220LC excavator greets guests as they arrive for Roland Machinery’s customer appreciation event.
A Roland Machinery service truck hoists the flag above the customer appreciation event in Portage, Ind.
Nick Bonarigo (L) of Gallagher Asphalt catches up with Matt Roland, president of Roland Machinery Co.
(L-R): Russ Kyle and Don Haverstuhl of Woodland Village talk with Mike Vanderbok of Roland Machinery Co.
(L-R): Looking at the specs on this Komatsu PC22LC excavator are three generations: Tyler, George and Mark Davis of Davis Excavating.
This LeeBoy 1000G asphalt paver is just one of many paving solutions Roland Machinery offers its customers.
This Hamm HD12 tandem roller is ready to prove what it can do.
Guests were treated to lunch, as well as being able to see equipment up close at Roland Machinery’s customer appreciation day.
Davis (L) has been with Komatsu America for 47 years and in the industry for more than 50 years. Davis shares his knowledge about this Komatsu PC220LC excavator with Dan Komenda, superintendent of Portage Field Forces.
(L-R) are Ray Pavesich of Gallagher Asphalt; Ed Ellis of Roland Machinery; and Brian Ludke of Gallagher Asphalt.
Dave Hawn (L) of Beemsterboer in Hammond, Ind., and Mike Vanderbok of Roland Machinery discussed the power of this Komatsu WA475 wheel loader.
Bob Schalow (L), territory manager of Roland Machinery, takes a break with Greg Wieczorek, corporate maintenance of TMS.
Jenkins
Belinda Speer and Ian Fahrenkrog of Carmeuse Portage stopped by the Roland Machinery Customer Appreciation event in Portage, Ind.
(L-R): Brady Link and Chris Hicks of Reworld, a waste solution company, talk with Steve Crutchfield of Roland Machinery.
One of the many machines for customers to look over during the event was this Komatsu WA 475 wheel loader.
Marc Pompilii (L) of Sevenson Environmental Services brought his service dog, Hope, to the event, where he talked with Rodger Dillon of Roland Machinery about this Komatsu PC22LC excavator.
We specialize in Cat Used Parts and Attachments
Huge attachment inventory. Over 300 attachments in stock. We Buy, Sell, and Trade. Inventory changes daily, please call to discuss your needs and how we can help.
308E CR: Dismantling now- 1,000 hour machine, HYD thumb, mechanical quick coupler. Also have HYD couplers available
CB534D xw: Dismantling now- All parts available
345C: Dismantling 2- Most parts available Cat IT coupler buckets: New surplus in many different sizes
Light Material Buckets: Light material buckets, Pin-on and Quick coupler available.
style. Truck Beds and Tailgates: Tailgates for
Backhoe and Small Loader Buckets: Quick coupler and pin on buckets for 420 backhoe, 914 and 918 Loader buckets.
980 GP Bucket: Cat 980 loader buckets available, many GP buckets on hand. Sizes form 7-10 yards.
972 GP Bucket: 972 GP bucket, Several available,
Excavator Sticks and Booms: Excavator stick, booms, and cylinders in stock.
Nuss Collection Hosts Open House in Rochester, Minn.
Standing in his bib overalls at the counter of the local Mack dealership, Charles Ind signed the check for a new truck for his construction company. This truck would be the first of many new Mack trucks sold by Bob Nuss’ father, Charles Nuss, and a core memory for Bob that stuck with him frozen in time. Later he would receive the original chassis build record from a family friend and customer to time stamp the moment in history forever.
For Bob Nuss of Nuss Truck and Equipment, knowledge of Mack trucks and the fleet industry have been a staple of his family since 1923; starting with Charles, who became a Mack dealer in 1959.
In high school, Bob worked in the parts department of his father’s shop and after college, he decided to return to his roots in Rockford, Minn., and rejoin the family business in 1969. In the mid-70s Bob received a job offer to run a dealership branch in Minnesota, he chose to take the position and ended up purchasing the dealership in 1979. The dealership’s initial location sat behind a truck stop that burned down in December 1979, offering Bob an opportunity to buy the property and rebuild.
Since 1983, Nuss Truck and Equipment has steadily expanded its footprint across the region, opening 10 branch locations across Minnesota, Missouri and Wisconsin to better serve its growing customer base. Over the years, the company has diversified and strengthened its offerings, becoming a trusted Volvo construction dealer and building a reputation for reliability and expertise in the heavy equipment industry.
In addition to its business achievements, Nuss has played a leadership role in the trucking community, with the company’s representatives serving as the dealer council chairman of Mack Trucks — helping to
The Nuss Collection Building America, which opened in 2021, houses trucks and vehicles starting from the early 1900s that have been restored by the Nuss family.
shape industry standards, foster collaboration and ensure that customer needs remain at the forefront of innovation and service.
“In 2001, we purchased RDO Truck and Equipment in the Twin Cities, which grew 60 percent in one day,” said Bob. “That was interesting since we were a privately held company and they were a publicly traded company; it ended up as a little blurb on the front page of the Wall Street Journal.”
The Nuss family is not only known for their truck and equipment business, but also for their museum collection of antique Mack trucks located in Rochester, Minn.
“We never really intended to have a museum,” said Bob. “We really just ended up with some stuff and my son Greg had a passion for it and one truck led to two, which led
to four, that led to eight and pretty soon we had to have a place to put it, we were fortunate to pick this building up and remodel it to house our collection.”
The Nuss Collection Building America, which opened in 2021, houses trucks and
vehicles starting from the early 1900s that have been restored by the Nuss family. Bob recalls having visitors all the way from Luxembourg come to admire the museum. One notable museum piece is a 1933 Mack CJ with serial number 1001 adorning the floor of the museum, the first truck in production that included the Mack bulldog and it was showcased at the World’s Fair in 1934.
Bob notes that his favorite addition is probably the 1926 Mack AP that took Nuss 18 months to restore. He also highlights a photo that hangs on the museum wall showcasing a Russian airplane loading up four Mack trucks. According to Nuss, the airplane was 4 ft. too short to hold all four trucks so Bob helped navigate a solution to angle park all the trucks to fit the plane.
Cascading three decades of evolution in Mack trucks, The Nuss Collection holds a piece of history that will never be forgotten, showcasing items restored. This museum captures Americana of the early 1900s and allows future generations to immerse themselves in one the country’s historical keepsakes of the trucking industry, not only letting visitors experience the history of trucks themselves, but of the Mack company. This year, Mack trucks have hit an important milestone, celebrating its 125th anniversary. Visitors are encouraged to view the collection and learn more about the pieces. The museum hosted its fall open house on Sept. 20, celebrating the history with free admission. Outside of the fall open house, the museum is open to visitors by appointment.
For more information, visit nussbuildingamerica.com.
(This article was submitted courtesy of Purple Wave Auction.)
MGX Rebrands Aspen to ‘Upfits By Aspen Equipment’
MGX Equipment Services is growing its footprint in the central United States, rebranding its Aspen Equipment facilities in Minnesota, Iowa, Nebraska and Missouri to the MGX Equipment Services brand.
While signage is changing, customers will continue to receive full support for new and used crane sales, parts, service and rentals of Grove, Manitowoc and National Crane products. The Missouri location also is an authorized dealer for Potain tower cranes in the Kansas City region.
The 'Upfits by Aspen Equipment' brand builds on Aspen's decades of experience in work truck upfitting for the construction, mining, railroad, tree care and utility end markets. Turnkey
work truck upfits incorporate bodies and components from many brands including Palfinger, BrandFX, Reading Truck, Switch-N-Go and more to offer customers a comprehensive product lineup with full-service aftermarket support.
“This rebranding initiative leverages the reputation of the Aspen Equipment name in the upfitting market while allowing for complete synergy with the MGX brand as we position ourselves for growth and better service the needs of our customers,” said Keith Poff, vice president and general manager of MGX Equipment Services.
For more information, visit mgxequipment.com.
Bob Nuss photo
Equipment Services logo
Bob Nuss photo
Bob Nuss, Nuss Truck & Equipment
CENTRAL POWER SYSTEMS & SERVICES
www.cpower.com
9200 Liberty Drive
Liberty, MO 64068
816-781-8070
Wichita, KS
316-943-1231
Woodward, OK
580-256-6014
Salina, KS
785-825-8291
Colby, KS
785-462-8211
Springfield, MO
417-865-0505
Joplin, MO
417-726-5373
Riverside, MO
816-415-6787
Wichita, KS
316-789-7370
Yukon, OK
405-324-2330
St. Peters, MO
314-427-4911
Liberty, MO
816-415-6700
Tulsa, OK
918-984-6565
MGX Equipment offers new, used, and rental equ rental fleet, OEM parts, and industry-leading repa services for fleets across the country. Contact the all your equipment needs.
E • GENUINE PARTS
ipment, an extensive crane ir and remanufacturing
e MGX branch near you for
(502)
PIRTEK BOLINGBROOK 181 W. CROSSROADS PKWY, STE. C BOLINGBROOK, IL 60440 (630) 755-5700
PIRTEK GURNEE 450 KELLER DR. PARK CITY, IL 60085 (847) 553-4224
PIRTEK MCKINLEY PARK 3440 S. ASHLAND AVE. CHICAGO, IL 60608 (773) 847-7393
PIRTEK O’HARE 1499 TONNE RD. ELK GROVE VILLAGE, IL 60007 (847) 640-7789
PIRTEK ROCKFORD 1500 E LINCOLN HWY. STE. 3 DEKALB, IL 60115 (815) 676-0960
PIRTEK SOUTH HOLLAND 17077-A WESTVIEW AVE. SOUTH HOLLAND, IL 60473 (708) 339-4673
(563) 202-1621
PIRTEK MERRILLVILLE 90 W. 79TH AVE. MERRILLVILLE, IN 46410 (219) 771-1794
PIRTEK PERRY 2154 S LYNHURST DR. INDIANAPOLIS, IN 46241 (317) 252-0120
PIRTEK PIKE 4219 WEST 96TH ST. INDIANAPOLIS, IN 46268 (317) 252-0120
PIRTEK COLUMBUS NORTH COLUMBUS, OH (380) 203-0860
PIRTEK COLUMBUS SOUTH 1671 TAYLOR RD. GAHANNA, OH 43230 (380) 203-0077
PIRTEK ELYRIA 606 LEONA ST. ELYRIA, OH 44035 (440) 595-8233
PIRTEK FENTON 316 AXMINISTER DR. FENTON, MO 63026 (636) 600-1981
PIRTEK OVERLAND 9425 DIELMAN ROCK ISLAND INDUSTRIAL DR. OLIVETTE, MO 63132 (314) 423-4600
PIRTEK SPRINGFIELD
2835 E DIVISION ST., STE. K SPRINGFIELD, MO 65803 (417) 342-8075
PIRTEK ST. LOUIS ST. LOUIS, MO 63103 (314) 423-4603
PIRTEK LAKE WINNEBAGO OSHKOSH, WI 54901 (920) 777-4673
PIRTEK MADISON 6354 COPPS AVE. MONONA, WI 53716 (833) 623-4673
Bobcat to Showcase Versatility, Performance at Utility Expo
The MT120 mini-track loader boasts a 1,200-lb. rated operating capacity and an 88.2-in. lift height and reach. At just 36 in. wide, the MT120 excels in tight spaces while its smooth, precise pilot controls and premium ride-on platform ensure operator comfort, according to Bobcat.
Bobcat Co. is set to make an impact at The Utility Expo 2025.
Alongside its trusted lineup, Bobcat will showcase some of its most recent additions — including the MT120 mini-track loader and the land management package, exclusive to the T86 compact track loader. Visitors also can explore an expansive product and attachment lineup on display and with hands-on demonstrations showcasing endto-end solutions for the most demanding job sites.
Booth Highlights
MT120 Mini-Track Loader — The MT120 boasts a 1,200-lb. rated operating capacity and an 88.2-in. lift height and reach. At just 36 in. wide, the MT120 excels in tight spaces while its smooth, precise pilot controls and premium ride-on platform ensure operator comfort, according to Bobcat.
The land management package, an exclusive offering for the T86 compact track loader, includes premium features like a rearview camera, reversing fan, advanced 7-in. touch display and a dedicated land management door.
With more than 20 compatible attachment categories, operators can use their MT120 for digging, ground preparation, utility installation, breaking up and removing concrete, trenching and much more.
T86 Compact Track Loader Land Management Package — The land management package, an exclusive offering for the T86 compact track loader, includes premium features like a rearview camera, reversing fan, advanced 7in. touch display and a dedicated land management door. Additional performance features include a Level II FOPS, headlight/taillight and exhaust guards, tubeline covers and polycarbonate rear and side windows.
UV34XL Utility Vehicle — For jobs that require operators to haul more materials, tow heavier loads and transport more people, the Bobcat UV34XL utility vehicle is an ideal solution. The 39.9-hp utility vehicle offers seating for six people and includes a 1,000cc, two-cylinder SOHC engine that delivers power, reliability and durability. The UV34XL will be shown with the limited accessory package and SP9
boxspreader.
Disc Mulcher — The 60 in. disc mulcher is a powerful land-clearing attachment that uses a flywheel design to store kinetic energy, allowing it to cut down trees up to 14 in. in diameter and shred them into mulch.
This tool is ideal for a variety of tasks, including utility line and right-of-way maintenance, site preparation and general vegetation management. With its hardened-steel knives and multiple operating techniques, the disc mulcher is a highly effective tool for clearing land, according to Bobcat.
Landplane — The 86 in. landplane is a versatile attachment designed for grading, leveling and preparing surfaces. It can easily break up hard ground, pulverize soil clods and sift out large rocks, whether moving forward or in reverse.
This tool also is ideal for peeling sod, aerating soil for seeding and transporting materials around a work site, making it a highly effective and multi-functional land prepara-
tion tool, according to Bobcat. The following equipment, solutions and attachments also will be on display in the booth:
Compact Equipment
• T76 compact track loader
• UW56 Toolcat utility work machine
Portable Power Solutions
• PA425v portable air compressor
• PA185vp portable air compressor
• PG40 portable generator
Light Compaction
• R68P rammer
• Trench roller Attachments
• 84 in. angle broom
• NB140 nitrogen breaker
• VP12 vibratory plow
• Root Grapple
Test Skills With Demo Challenges
Whatever the challenge, Bobcat is ready to meet it, teh company said. Put your skills to the test and see how the Bobcat lineup empowers you to confidently conquer any job with versatility and power.
MT100 and MT120 Mini-Track Loaders: See the different lift heights of the mini-track loaders by dumping material over the limbo bars, demonstrating their lift height and agility in tight spaces.
T66 Compact Track Loader: Experience the T66’s controllability and precision by using a 74-in. industrial bucket grapple to stack tires in a challenging pyramid or tower.
E20 Compact Excavator: Discover how “big performance comes in small packages” as you maneuver the E20’s retractable undercarriage through a gate.
E38 Compact Excavator: Test your precision on the E38 equipped with a trenching bucket and enhanced depth check system, using the display screen to achieve predefined dig depths.
For more information, visit bobcat.com.
Bobcat photo
Bobcat photo
Bobcat Co. is set to make an impact at The Utility Expo 2025.
Bobcat photo
see CHART page 42
BELL TRUCKS
CATERPILLAR
DEVELON
HYDREMA TRUCKS
JOHN DEERE
ROKBAK
Illinois
Finkbiner Equipment Co.
www.finkbinerequipment.com
BURR RIDGE (630) 654-3700
EAST PEORIA (309) 863-4831
Indiana
RECO Equipment, Inc.
www.recoequip.com
INDIANAPOLIS (317) 781-8100
FT.WAYNE (260) 255-3115
Iowa er Interstate Pow r Systems, Inc.
www.istate.com
CEDAR RAPIDS (319) 396-4111
DAVENPORT
(563) 388-9988
ALLTTOONA (519) 957-3300
Kansas Central Power Systems & Services
www.cpower.com
WICHITTA A (316) 789-7370
GARDEN CITY (620) 765-3118
North Dakota Interstate Power Systems, In www.istate.com
BISMARCK (701) 258-2303
F FAARGO (701) 282-6556
GRAND FORKS (701)7468400
(701) 746-8400
WILLISTON (701) 572-2000
Ohio
RECO Equipment, Inc. www.recoequip.com
BELMONT (740) 782-1314
COLUMBUS (614) 276-0001
TOLEDO (419)8746001
(419) 874-6001
RICHFIELD (330) 659-0800
MONROE (513) 539-5255
South Dakota Interstate Power Systems, In www.istate.com
F SIOUX FAALLS (605) 339-8839
Kentucky RECOEquipment,Inc.
RECO Equipment, Inc.
www.recoequip.com
FLORENCE (859) 727-7970
LOUISVILLE (502) 861-7326
Michigan RECO Equipment, Inc. www.recoequip.com
BRIGHTON (810) 225-9016
MARNE
Wisconsin AmericanStateEquipmentCo c.
American State Equipment Co www.amstate.com
MILLWWAUKEE (414) 541-8700
WAUSAU (715) 675-6900 o (616) 616-1550
Minnesota American State Equipment Co. www.amstate.com
DULUTH (218) 260-0581
FOREST LAKE (651) 464 0996
Missouri
Central Power Systems & Services
www.cpower.com
LIBERTY
LIBERTY (816) 415-6700
MARYLAND HEIGHTS (314) 427-4911
SPRINGFIELD (417) 865-0505
Nebraska er Interstate Pow r Systems, Inc. www.istate.com
LINCOLN (402) 438-3767
OMAHA (402) 331-4104
Liebherr USA, C material handli t
components ar Liebherr or in c highest possib entire drive and of components Reach out to yo information.
o. offers an extensive lin ing equipment and techn dlddf
e of earthmoving and ology in the USA. Main tdihb
e developed and manufactured in-house by lose collaboration with our partners to ensure the le quality standards.These components include t d controltechnology, diesel engines, and a variety s for hydraulics, gearboxes and electronic systems our local Liebherr distribution partnerfor more e the y s.
Komatsu Commissions First Diesel
Trolley Power Agnostic 930E Truck
Komatsu, in collaboration with Boliden, announced the commissioning and start of field trials for the first diesel trolley truck in its new Power Agnostic (PA) series.
The Komatsu Power Agnostic 930E truck was deployed at Boliden’s Aitik mine in Gallivare, Sweden, marking a major step forward in the journey toward decarbonizing surface mining operations.
Unveiled at MINExpo 2024 in Las Vegas, the Power Agnostic 930E haul truck garnered significant attention for its modular, future-forward design. The truck displayed on the show floor was earmarked for Boliden’s Aitik copper mine, marking the first truck to undergo mine site testing. Now operating at one of Europe’s largest and most productive open-pit copper mines, this haul truck is set to undergo a 12-month field trial.
Built on Komatsu’s new modular platform, the Power Agnostic 930E offers flexibility and future-proofing. The PA platform enables customers to begin with diesel power and later transition to alternative energy sources such as battery-electric or hydrogen fuel cell technology, depending on their operational needs, technology readiness and pace of decarbonization efforts. The integration of diesel trolley assist functionality further enhances
Komatsu Power Agnostic 930E truck was deployed at Boliden’s Aitik mine in Gallivare, Sweden, marking a major step forward in the journey toward decarbonizing surface mining operations.
performance by reducing fuel consumption and emissions, while paving the way for a future electrified mine.
“Integrating the Power Agnostic 930E into our fleet reflects Boliden’s ambition to be at the forefront of sustainable mining,” said Jonas Ranggard, senior project manager, Boliden. “Partnering with Komatsu on this pilot helps us explore innovative solutions
17035 N. Illinois Hwy. 37 Mt. Vernon, IL 62864 618-242-2273
800-388-6396 1501 Lynch Road Evansville, IN 47711 812-425-4428 800-258-4428
Harlan Drive Terre Haute, IN 47802 812-299-4747 888-343-4747
that align with our climate goals while continuing to deliver productivity and performance. We see great potential in this technology and look forward to where it can lead us next.”
As a founding member of Komatsu’s Greenhouse Gas Alliance, Boliden is reinforcing its commitment to a more sustainable future. The upcoming trial will enable Komatsu and Boliden to gather detailed operational insights and learnings to advance haulage decarbonization efforts further.
“This is more than just a technical achievement, it’s a meaningful step forward in our joint commitment towards zero-emission mining,” said Jeroen De Roeck, senior mining manager, Komatsu Europe. “By commissioning the first diesel trolley truck in our Power Agnostic series at Boliden’s Aitik Mine, we are turning vision into reality. Our partnership with Boliden is a shining example of how collaboration can drive sustainable innovation in mining.”
The learnings from this field trial will play a critical role in guiding future advancements in Komatsu’s poweragnostic lineup. This will support both companies’ shared ambition to decarbonize mining operations and drive progress toward a lower-emission future.
For more information, visit komatsu.com.
Komatsu photo
Komatsu, in collaboration with Boliden, announced the commissioning and start of field trials for the first diesel trolley truck in its new Power Agnostic (PA) series.
Komatsu photo
The
THE DOER’S DREAM
Loved for the features. Trusted for the performance.
Hyundai articulated dump trucks have the power and performance — not to mention top-notch interiors, clear sight lines and handy tech — that make life on the jobsite easier. So you can do more without feeling like longtime fans.
See the Hyundai difference yourself at your local dealer or na.hd-hyundaice.com.
CHART from page 38
see CHART page 44
HITACHI
Cummins QSK60-2S; E MTU 16V4000 C55
KOMATSU
Innovation Positions Hitachi to Zero in On Mine Future
Leading-edge solutions help mine owners address their most pressing concerns: operating costs, productivity, the environment and mine safety. Hitachi Construction Machinery is forging a path toward Zero Emissions, Zero Downtime and Zero Entry Mines to reduce fuel consumption and interruptions for a lower cost per ton while enhancing safety by removing employees from mining operation danger zones.
Path to Zero Emissions
Hitachi Construction Machinery pioneered the hydraulic excavator beginning in 1965. In 1979, the company entered the mining industry in earnest. Today, the company offers a range of EX-7 wired mining electric excavators that complement conventional EX-7 excavators, helping mine operators lower their total cost of ownership (TCO) while slashing greenhouse gas emissions.
EX-7 electric excavators require less frequent servicing and experience reduced machine downtime by eliminating the diesel engine.
When paired with reliable EX5600-7 excavators, the next-generation EH4000AC-5 rigid dump trucks make for a sustainable and efficient mine site. EH4000AC-5 dump trucks have been designed to reduce fuel consumption while enhancing productivity, reliability and safety.
Work mode selection allows workers to choose the optimal mode based on the mining site environment and operating conditions. In ECO mode, the engine output is lower than the default setting, resulting in reduced fuel consumption. H/P mode provides higher engine output.
This model also has been designed with the potential retrofit expansion to trolley diesel and battery systems, making it next-generation capable for reduced emissions.
Hitachi mining haul trucks offer a retrofittable trolley configuration that allows drivers to alternate between powering the truck in diesel mode and raising the pantograph to power the truck via overhead catenary lines in Trolley Mode.
Trolley trucks simultaneously boost production, reduce operating costs and lower greenhouse gas emissions. They climb uphill slopes at approximately twice the speed of diesel trucks and reduce noise emissions while running in trolley mode.
While running in trolley mode, the diesel engine runs less extending the engine life and reducing maintenance costs, according to the manufacturer.
Hitachi Construction Machinery elevates mine site sustainability to the next level with the development of a zero-emission full battery trolley dump truck.
Drawing electric power from a dynamic charging system allows continuous operation with no stops for recharging.
This dynamic charging system minimizes the weight of the battery solution, maximizing
the truck’s payload capacity.
The all-battery trolley dump truck utilizes an ABB-supplied onboard battery system and dynamic charging option via pantograph and overhead trolley lines to simultaneously charge the battery and provide energy to power the truck. Regenerative braking also adds charging capabilities to the battery management system.
The drive toward zero emissions requires a holistic approach that extends beyond the equipment. Mine sites operate 24/7 and they need management solutions to reduce environmental impact while achieving sustainable resource extraction.
Fleet management and digital mining solutions from Wenco, a wholly owned subsidiary of Hitachi Construction Machinery, and Envirosuite, an environmental intelligence company, provide real-time data to enable responsible mining practices.
Hitachi photo
When paired with reliable EX5600-7 excavators, the next-generation EH4000AC-5 rigid dump trucks make for a sustainable and efficient mine site.
Hitachi Construction Machinery offers a full suite of digital solutions to solve environmental and greenhouse gas challenges. Through business partnerships and startups, there is a suite of innovative solutions across the full spectrum of mining operations. One example is analyzing driver operation data and machine emissions to calculate optimal operation routes.
Path to Zero Mine Entry
Safety is a primary concern when people work close to mining equipment. Limiting employee exposure is possible through mine site automation, such as driverless automated haul trucks.
The Hitachi Automated Haulage System (AHS) combines advanced digital technologies and Wenco International Mining System’s fleet management system (FMS) to enable uncrewed operation of mining trucks at open-cut mining pits. The system optimizes route navigation, acceleration and braking for decreased life-cycle costs.
AHS takes automation to the next level by allowing mixed fleet integration with manned fleets while transitioning from conventional to autonomous operations, open interoperability to optimize across your entire truck fleet and the ability to retrofit existing trucks.
On the path to a Zero Entry Mine, Hitachi Construction Machinery is developing a system for semi-autonomous and remote operation of ultra-large hydraulic excavators.
Key features of this system are the Digging Assist Function to support the excavation of ore, and the Loading Assist Function to support an optimized loading cycle.
Once complete, this system aims to improve operational performance, and mine sites will benefit from reduced operator burden and increased productivity.
Path to Zero Downtime
Reducing downtime and extending product life helps mine sites maintain production rates while reducing greenhouse gas emissions. Mine sites can achieve both goals by closely monitoring mining operations and machine health.
With ConSite Mine remote monitoring and
remanufacturing services, users can prevent breakdowns and extend the life of their machines.
ConSite Mine remotely monitors the condition of large hydraulic shovels and rigid dump trucks, promptly generating alerts when sensors detect abnormalities.
One of the features, ConSite Oil, continuously monitors oil conditions to catch issues that occur between oil analysis intervals.
ConSite Mine Plus leverages digital platforms with ecosystem partners to enhance operational efficiency, reduce unexpected downtime and maximize equipment performance. The consolidated digital platform provides customers with a Path to Zero Downtime.
Hitachi Construction Machinery established the Technological Centers of Excellence (TCoE), which remotely monitors and supports mine operations 24 hours a day, 365 days a year from Australia, Japan and Canada. The same information customers get in their mine control room is monitored in realtime. Advanced digital technologies will analyze data to help drive customer solutions. For more information, visit hitachicm.us/industry/mining/.
Compact Track Carriers, Dumpers & Trucks
AUSA
TAKEUCHI
Wheeled Dumpers
Compact Track Carriers, Dumpers & Trucks
MOROOKA
PRINOTH
Crawler Dumpers
BERGMANN
YANMAR
Volvo Construction Equipment Unveils
New Lineup of Articulated Haulers
Volvo Construction Equipment unveiled its biggest and boldest articulated hauler launch to date. The new range is designed to meet the modern-day need for connected solutions, productivity performance and emission reduction, with the human at the center.
Volvo CE’s update represents a complete overhaul of its existing articulated hauler lineup, now ranging in size from A25-A60.
An entirely new model, the A50, has been introduced, increasing customer opportunities in the demanding hauler segment.
The range delivers key innovations, such as a new electronic system, upgraded cab for superior operator comfort and safety, and an in-house developed transmission designed to adapt to future drivetrains.
With over 35 percent of its total range renewed over the last 12 months, this marks the latest step in Volvo CE´s largest product portfolio renewal in decades.
New Range From A25-A60
Volvo CE, the pioneer behind the world’s first articulated hauler “Gravel Charlie” in 1966, announced the launch of a new lineup of world-class articulated haulers, which is set for stepwise introductions on markets globally during 2025.
The updated models mark a significant technological leap forward due to key innovations such as a new electronic system and an in-house developed transmission, delivering fuel efficiency improvements of up to 15 percent depending on model and industrial application. Furthermore, the machines’ new design has been constructed in such a way as to adapt over time to fit future drivetrains, the manufacturer said.
New Family Member: A50
A highlight of this launch is the all-new A50 model, which expands customer opportunities in the demanding hauler segment. This addition, available in selected markets, underscores Volvo CE’s commitment to meeting the evolving needs of its customers by enhancing operational capabilities and offering more choices.
The result is cutting-edge, safe and productive machines that have been purpose-built to lower total cost of ownership and respond to the challenges of today and tomorrow across the toughest of work sites, especially when combined with Volvo CE’s pioneering digital solutions, such as the Haul Assist with onboard weighing.
Melker Jernberg, President of Volvo CE, said, “For nearly 60 years we have been leading the way with our range of articulated haulers and now with today’s launch of a new range of outstanding products, including one completely new model, we prove that there are no limits to our capacity for innovation.
“Our customers know to expect a first-class operation when they get into one of our haulers, but that experience has just got even better with a host of cutting-edge features designed with our customers in mind.”
Circular Approach
Developed to be among the most fuel-efficient hauling solutions on the market, the new models also have been built with a focus on sustainability. This includes the introduction of low carbon emission steel — made from recycled materials and produced using fossil free electricity and biogas — in serial production of haulers manufactured at the Braås site. Given steel is a major component in Volvo CE products — and traditionally generates significant carbon emissions — material circularity is another example of Volvo CE taking action across its operations to achieve net zero greenhouse gas emissions by 2040.
Step Toward Future
This launch is part of Volvo CE’s most extensive product portfolio overhaul in decades, with over 35 percent of its range renewed in the past 12 months. It marks a pivotal step in the company’s ongoing commitment to innovation and leadership in the construction equipment industry.
Like in 1966, the new generation haulers once again set the industry benchmark for innovation and best-in-class operation.
For more information, visit volvoce.com.
martinequipment.com
Goodfield, IL 309-965-2502
Peru, IL 815-224-4711
Rock Island, IL 309-787-6108
Springfield, IL 217-528-4347
Tolono, IL 217-485-6755
Cedar Rapids, IA 319-365-0515
Dubuque, IA 563-588-1950 Columbia, MO 573-657-2154 Palmyra, MO 573-769-2274
murphytractor.com
Park City, KS
316-942-1457
Great Bend, KS 620-792-2748
Humboldt, KS 620-473-7020 Olathe, KS 913-298-7373
Topeka, KS 785-233-0556
Ulysses, KS 620-356-1071
Dodge City, KS 620-227-3139
Gering, NE 308-436-2177 Omaha, NE 402-894-1899
Lincoln, NE 402-467-1300
Grand Island, NE 308-381-0741
North Platte, NE 308-534-7020
Kansas City, MO 816-483-5000
Springfield, MO 417-863-1000 Des Moines, IA 515-263-0055
Grand Rapids, MI 616-538-2400 Lenox, MI 586-727-7502
New Hudson, MI 248-437-8121
Williamsburg, MI 231-267-5060
Volvo Construction Equipment unveiled the newest model in its lineup of articulated haulers, the model A50.
Volvo photo
www.brookstractor.com
Madison (Sun Prairie), WI 608-837-5141
Milwaukee, WI 414-462-9790
Green Bay (De Pere), WI 920-336-5711
La Crosse (West Salem), WI 608-786-2644
Stevens Point (Plover), WI 715-254-2777
Racine (Mt. Pleasant), WI 262-898-6700 Sparta,WI 608-351-2101
www.lec1.com
Beaver, WV 304-255-1525
Cowen, WV 304-226-3299
Cross Lanes, WV 304-204-1818
Pleasant Valley, WV 304-534-5454
Norton, WV 304-636-6421
Marietta, OH 740-373-5255
Ashland, KY 606-327-1709
Pikeville, KY 606-432-0321
www.westsidetractorsales.com
Lisle, IL
630-355-7150
Rockdale, IL 815-730-9011
Rockford, IL 815-961-3160
South Holland, IL 708-331-6362
Wauconda, IL 847-526-7700
Bloomington, IN 812-333-9677
Fort Wayne, IN 260-482-8576
Indianapolis, IN 317-544-3411
Lafayette, IN 765-447-6933
South Bend, IN 574-232-1461
Terre Haute, IN 812-645-7160
When it came time to design our 460 P-Tier and 410 P-Tier Articulated Dump Trucks (ADTs), we decided to go straight to the source. We asked you what you needed and then took it from there. The end result: ADTs that deliver enhanced fuel efficiency, improved rear-camera display, a more comfortable cab, and optional onboard payload weighing. Proving that the proper inspiration can make all the difference.
mccoycf.com
JohnDeere.com/ADTs
Bemidji, MN 218-759-1996
Duluth, MN 218-722-7456
Grand Rapids, MN 218-326-9427
Ashland, WI 715-682-5522
Chippewa Falls, WI
715-834-2924
Merrill, WI 715-536-0633
Escanaba, MI 906-789-9054
Marquette, MI 906-789-7689
Fenton, MO
636-349-0200
Foristell, MO 636-463-2500
Mitchell, IL 618-931-1034
Mt. Vernon, IL 618-244-6800
Cape Girardeau, MO 573-334-0563 Paducah, KY 270-554-1131 Cuba, MO 573-885-0500 Owensboro, KY 270-684-2339
From Firefighting to Forestry: Six ADT Uses Beyond Mining
ADTs such as the Rokbak RA30 and RA40 are built for off-road performance, steep grades and tough terrain.
Haulers such as these feature regularly across projects you’d expect them — and some where you wouldn’t. Here’s a look at six unique, and perhaps unexpected, ways articulated haulers are working harder and smarter — beyond the pit.
Water Trucks: Taming Dust, Fighting Fires
One of the most versatile adaptations of ADTs is the articulated water truck. These haulers can be used for dust suppression, site cleaning and even emergency firefighting. Equipped with water tanks and pumps, ADTs can perform on the tough terrain where traditional fire trucks may struggle. Units are able to transport water, assist in earth moving and prove a stable presence in unstable conditions. Recently, through a partnership with Hydex, Rokbak haulers have been transformed into mobile water distribution units.
Forestry Trucks: Clearing Way
In the dense and often uneven landscapes of forest operations, haulers fitted with logging platforms have become forestry workhorses. Their ability to traverse slippery, muddy and steep terrain makes them ideal for hauling large quantities of logs to and from remote locations. ADTs with logging racks help maintain forestry productivity even in adverse weather conditions or undeveloped sites.
Military Logistics Trucks: in Combat Zone
The robust engineering of articulated haulers makes them perfect for defense operations. Modified as military trucks, these vehicles can transport equipment, munitions or personnel across unpredictable terrain where conventional trucks would fail. Their high ground clearance and drivetrains are suited for rapid deployment, disaster response and logistical support in both combat zones and humanitarian missions.
Drilling Rigs: Foundations for Infrastructure
Drilling and geotechnical projects can benefit from ADTs converted into mobile drilling platforms. When equipped with hydraulic drill arms and on-board compressors, these rigs can reach otherwise inaccessible sites — whether for mineral exploration, utility installation or foundation work. Their articulation and all-terrain capability mean operators can access tough areas without creating new access roads, minimizing environmental impact.
Waste Disposal: Keeping Clean
Articulated trucks can play an essential role in waste management, especially in landfills, recycling facilities, demolition sites and waste processing plants. Nearly every landfill uses one or more ADTs for tasks like cell development, hauling soil and building haul roads. Designed for rough terrain, slopes and soft or wet ground, these trucks are ideal for the challenging conditions often found in such environments.
Their versatility and durability make them a key asset in efficiently transporting waste and debris across large-scale operations.
Disaster Relief, Emergency Response: Haulers On Hand
Whether it’s a flood, landslide or wildfire aftermath, ADTs can be rapidly repurposed for emergency logistics. Their ability to transport heavy supplies, debris and water can contribute to post-disaster operations. The high articulation and ground clearance allow access to remote areas where other trucks cannot go, delivering aid or clearing paths for emergency services.
Molded in Motherwell, Scotland, Rokbak’s ADTs are built to be more than dump trucks. The RA30 and RA40 platforms serve as foundations for industry-specific solutions and can help redefine what’s possible on — and off — the road..
(This article is courtesy of Rokbak.)
Rokbak photo
Hydex has adapted robust Rokbak RA30 and RA40 articulated haulers into water trucks to meet the growing demand for dust suppression.
Articulated haulers are built for more than quarries, proving their strength in surprising applications. Rokbak photo
Rokbak articulated haulers are robust and reliable. Rokbak photo
Lano Equipment of Norwood, Inc. Norwood Young America 952-467-2181 www.lanoequipofnorwood.com
MINNESOTA
Swanston Equipment
Bobcat of Alexandria
320-460-8773
Bobcat of Fergus Falls 218-739-4505 www.swanston.com
Tri-State Bobcat Burnsville 952-894-0894
Little Canada 651-407-3727 www.tristatebobcat.com
NORTH DAKOTA
Bobcat of Devils Lake Devils Lake 701-662-5331
www.goironhide.com
Swanston Equipment
Bobcat of Fargo 701-293-7325
Bobcat of Minot 701-837-9901 www.swanston.com
Bobcat of Grand Forks Grand Forks 701-772-5006 www.goironhide.com
Bobcat of Williston Williston 701-572-5050 www.goironhide.com
WISCONSIN
Tri-State Bobcat Hudson 715-531-0801
New Location! 2018 US Hwy 8 St. Croix Falls, WI 715-557-6010 www.tristatebobcat.com
JCB Breaks Ground On Midwest Parts Distribution Facility
JCB and logistics partner DSV celebrated the groundbreaking of a new parts distribution warehouse in Plainfield, Ill. The facility marks a major milestone in JCB’s continued investment in North America. Strategically located in one of the nation’s most vital logistics corridors, it will become JCB’s largest multi-client warehouse in the Chicago metro region — providing faster access to critical parts, reducing equipment downtime and keeping operations running across the Americas.
“This groundbreaking represents more than just a building. It is a continuation of our commitment to support customers with fast, reliable parts and service,” said Clyde Shepherd, North American Parts operations general manager, JCB North America.
“Whether it’s a replacement part for a teleskid on a construction site or hydraulic components for a tractor in the field, being closer to a major logistics hub means faster fulfillment and shipping. We’re positioning ourselves closer to where our machines work so our customers can stay productive.”
Owned and operated by global logistics leader DSV to serve multiple clients, the full footprint of the new facility will be 804,000 sq. ft., which includes more than 740,000 sq. ft. of floor space; a 43,725-sq.-ft. mezzanine;
and 22,268 sq. ft. of office space. JCB will hold 275,000 sq. ft. of the new facility,replacing current operations in Aurora, Ill., and serving as the company’s
and
service capabilities, customers can expect greater reliability, quicker turnarounds and more responsive
support.
“At DSV, we take pride in offering flexible, reliable supply chain solutions,” said Josh Summers, president of DSV Contract Logistics North America. “Providing the space for this project reflects the strength of our relationship with JCB and our shared focus on operational excellence.”
Located within 40 mi. of O’Hare International Airport and with direct access to I-55, I-80, I-90 and I-94, the Plainfield site offers outstanding connectivity to air, road and rail networks. Built for high-volume operations, the facility features 75 dock doors, three drive-in doors and a 40-ft. ceiling height. It also supports advanced logistics services such as e-commerce fulfillment, returns management, repackaging, kitting and relabeling — all critical tools for supporting JCB owners who depend on quick parts delivery to minimize machine downtime.
The Plainfield facility is part of JCB’s broader logistics strategy in North America, which includes parts distribution sites in Miami, Fla.; Grimsby, Canada; and Ontario, Calif. Together, these hubs form a robust network that ensures timely parts delivery wherever JCB machines are working.
For more information, visit jcb.com.
Midwest logistics hub. With expanded inventory
enhanced
JCB photo
JCB and logistics partner DSV celebrated the groundbreaking of a new parts distribution warehouse in Plainfield, Ill.
Bizzack Crews Setting Stage for Final Parkway Segment
PARKWAY from page 1
Because of its size, MPE was divided into six segments, including three that have already finished. In addition to Magoffin-Floyd, construction continues on the Wolfe County and Magoffin-West segments. Their completion will represent a major accomplishment, as crews work to wrap up the first 32 mi. of the project.
“As a whole, things are going well, due to the support of federal, state and local officials, as well as the excellent work from KYTC, contractors and crews,” said Skaggs. “The project also is fortunate to have support from the local and regional communities.”
Heavy equipment at the various sites includes a mix of oversized dump trucks, trackhoes, excavators, compactors, graders, dozers, cranes and concrete trucks. Skid steers and asphalt paver rollers also are required.
As for construction challenges at this point, said Skaggs, “With any large excavation heavy project, balancing the amount of cut and fill as much as possible is always a goal, alongside managing waste areas while being considerate of the terrain. It’s also important to be mindful of safety while working adjacent to traffic, and to communicate shifting traffic patterns as work is completed and construction zones shift.”
Skaggs noted that other than some rain, there haven’t been any significant setbacks due to weather; however, that could soon change.
“As with all roadway projects, extreme temperatures such as cold and wet weather can
cause construction delays. Construction on the Mountain Parkway most typically slows down during the winter months in Kentucky.”
Described as MPE’s most ambitious segment, MagoffinFloyd has the distinction of building all new roadway, totaling 13 mi. Bizzack Construction crews are in the process of clearing trees and brush, and performing other work to begin
excavation.
Skaggs said creating a major highway through mountainous terrain is one of the most complex and costly types of construction, with the price for Magoffin-Floyd work estimated at $300 million. The design-build team includes Palmer Engineering, Haydon Bridge, Bush & Burchett, S&ME Inc., J. Davis Law Firm and Civil Design LLC.
Construction includes design elements aimed at improving safety, reducing congestion and supporting efficient traffic flow. The work calls for several new bridge structures over waterways and existing roads, a modern roundabout at the eastern terminus in Prestonsburg and roughly 30 million cu. yds. of excavation.
Skaggs said starting construction on Magoffin-Floyd and continuing work on the other two segments means KYTC is delivering on a decades-long promise to complete the parkway and close the only remaining gap in a continuous, four-lane corridor.
“MPE is about more than pavement. It’s about establishing a safe, modern, high-speed highway that connects eastern Kentucky to the rest of the Commonwealth. It creates a more accessible and efficient connection for motorists traveling both to and from the region.”
While no completion date has been announced for the Magoffin-Floyd segment, Skaggs said construction has reached a crucial point in this once-in-a-generation project.
“For the first time, the end is truly in sight.”
Kentucky Transportation Cabinet photo
The Wolfe County segment of MPE construction involves widening 11 mi. of roadway.
Kentucky Transportation Cabinet photo
The Wolfe County segment runs from the end of the four-lane section on the Mountain Parkway near Campton to just west of the Lee City/West Liberty interchange.
Bizzack Construction serves as lead contractor for the Wolfe County and Magoffin-Floyd segments, while High Point Construction oversees the Magoffin-West effort.
Kentucky Transportation Cabinet photo
SECTIONPaving
Sakai Produces 1,000th SV544 Soil Compactor in Georgia
Sakai America Inc. announced a milestone with the production of its 1,000th SV544 soil compactor at its Adairsville, Ga., factory. The specific machine, an SV544TBCF model equipped with a padfoot drum, leveling blade, cab and removable smooth shell, is heading to Power Motive, a dealer in the western United States.
The SV544, an 84 in. soil compactor in the 12-15 ton class, is a modern powerhouse in soil compaction that began production in late 2017, replacing the SV540 series. Its design is engineered for critical applications like highway foundations, large-scale developments and site preparation. The completion of the 1,000th unit underscores Sakai’s continued focus on delivering compaction solutions
to the North American market.
“Producing the 1,000th SV544 is an incredible achievement that speaks volumes about our team,” said Kevin McClain, vice president of operations. “While technology has changed many industries, we’ve deliberately maintained a hands-on approach. Every machine is assembled with the dedication and craftsmanship of our skilled American employees. Our commitment to quality and reliability is something that is built into every unit by hand. This milestone is a celebration of their hard work and unwavering focus on delivering a machine our customers can depend on, job after job.”
Unlike fully automated production lines, each Sakai machine is
“This milestone is a direct reflection of the trust our customers place in our equipment, and it’s a testament to our commitment to meeting their needs.”
Kevin McClain Sakai America Inc.
meticulously assembled by hand by American employees. This quality-driven approach ensures that every machine meets the company’s stringent standards for reliability and performance, according to Sakai.
“The SV544 has become a standout product in our lineup and
our best-selling model in recent years,” said Brad Belvin, manager of sales and marketing. “This milestone is a direct reflection of the trust our customers place in our equipment, and it’s a testament to our commitment to meeting their needs. The real advantage is our local manufacturing here in
Georgia. Being close to our customers allows us to be more responsive, offer better support and ensure that our soil compactors are perfectly suited for the projects they’re tackling across the nation.”
Sakai has a long and proud history of providing compaction equipment to the U.S. market, a legacy that began with its first sales in 1976. The company established its local manufacturing presence when its first machine rolled off the Adairsville line in 2001. Sakai America looks forward to celebrating its 25th year of United States manufacturing in 2026, a testament to its enduring legacy of quality and innovation.
For more information about Sakai America visit SakaiAmerica.com.
Sakai photo
DePere, WI 920/532-0165
Deforest, WI 608/842-4151
Franksville, WI 262/835-2710
Schofield, WI 715/355-9898
Slinger, WI 262/644-7500
www.rolandmachinery.com
Eau Clair, WI 715/874-5400
Escanaba, MI 906/786-6920
Springfield, IL 217/789-7711
Carterville, IL 618/985-3399
East Peoria, IL 309/694-3764
Bridgeton, MO 314/291-1330
Cape Girardeau, MO 573/334-5252
Columbia, MO 573/814-0083
Palmyra, MO
573/769-2056
3001 Oxbow Court SW Bondurant, IA 50035
515/282-0404
800/555-1445
10740 High Life Court SW Cedar Rapids, IA 52404
319/363-9655
800/616-6615
1400 North Hwy 75 Sioux City, IA 51105
712/252-0538
800/633-9104
3150 5th Ave.
East Moline, IL 61244
309/755-7203
800/633-9114
Contractor Paves at 7,750-Ft. Elevation for Niesenbahn Project in Bernese Alps
Vögele photo
The project involved difficult paving conditions with snow, wind and icy temperatures. A Mini 500 from Vögele was used to pave the new asphalt surface course efficiently and to a high quality standard.
Vögele photo
The lead contractor deployed a Vögele Mini 500 asphalt paver for the rehabilitation of a footpath on the summit of the Niesen mountain in Switzerland.
Due to its striking shape, the 7,750ft.-tall Niesen in the Bernese Oberland also is known as the “Pyramid of the Alps.”
To prepare the popular mountain destination south of Lake Thun for the summer season, the path between the mountain station and the mountain restaurant had to be renovated. The 558-ft. route is used for food and beverage transportation and is frequented by approximately 1,000 people every day in the high season.
Tricky Task
As the summit of the Niesen can only be reached by funicular or helicopter, the construction site logistics were a major challenge. Due to the
high quality requirements, the surface course had to be laid by machine in a width of six to 14 ft.
Vögele photo
A spectacular material feeding method. A helicopter offloaded fresh, hot asphalt mix to the Mini 500 every four minutes to keep it constantly supplied with sufficient material for continuous paving.
In addition, the weather conditions were very difficult due to the altitude and exposed location. As a result of the low temperatures, the paving team had only a narrow time window each day for the paving work.
Paver Transport By Cable Car
To pave the new surface course efficiently and to a high standard, the contractor, Marti AG Bern, opted for the Mini 500 from Vögele. The manufacturer’s smallest road paver model is predestined for applications where narrow pave widths, compact dimensions,
low weight and high paving quality are required, according to Vögele. With a transport length of 8.5 ft., a width of 3 ft. and a weight of 1.54 tons, the site team was able to transport the paver to the mountain station using the Niesen cable car. The Niesenbahn is one of the longest funicular railroads in the world and climbs at a gradient of 68 percent in some places up to the mountain station.
AIS CONSTRUCTION EQUIPMENT
www.aisequip.com
Grand Rapids, MI
616-538-2400 Lenox, MI 586-727-7502 Williamsburg, MI 231-267-5060 Lansing, MI 517-321-8000 Bridgeport, MI 989-777-0090
New Hudson, MI 248-437-8121
MURPHY TRACTOR & EQUIPMENT CO., INC.
www.murphytractor.com
Park City, KS
316-942-1457
Great Bend, KS 620-792-2748 Topeka, KS 785-233-0556 Ulysses, KS 620-356-1071 Dodge City, KS 620-227-3139 Gering, NE 308-436-2177 Omaha, NE 402-894-1899 Lincoln, NE 402-467-1300 Grand Island, NE 308-381-0741 North Platte, NE 308-534-7020 Kansas City, MO 816-483-5000 Springfield, MO 417-863-1000 Des Moines, IA 515-263-0055
Fort Dodge, IA 515-576-3184 Sioux City, IA 712-252-2753 Waterloo, IA 319-235-7085
www.rolandmachinery.com
Springfield, IL
217/789-7711
Carterville, IL
618/985-3399
East Peoria, IL
309/694-3764
Portage, IN
219/764-8080
Bridgeton, MO
314/291-1330
Cape Girardeau, MO
573/334-5252
Columbia, MO
573/814-0083
Palmyra, MO
573/769-2056
Eau Claire, WI 715/874-5400
DePere, WI 920/532-0165
Deforest, WI 608/842-4151
Franksville, WI 262/835-2710
Schofield, WI 715/355-9898
Slinger, WI 262/644-7500
2600 S. Lincoln Rd. Escanaba, MI 906/786-6920
www.brandeismachinery.com
17000 Highway 41 N Evansville, IN 47725 812/425-4491
7310 Venture Lane Ft. Wayne, IN 46818 260/489-4551 8410 Zionsville Road Indianapolis, IN 46268 317/872-8410 1801 Watterson Trail Louisville, KY 40299 502/491-4000
1484 American Greeting Card Road Corbin, KY 40701 606/528-3700
1389 Cahill Drive Lexington, KY 40504
859/259-3456
160 County Park Road Paducah, KY 42001 270/444-8390
130 Mare Creek road Stanville, KY 41659 606/478-9201
535 Modern Way Bowling Green, KY 42101 270/780-3004
www.rmsequipment.com
5633 W Hwy 13 Savage, MN 55378
952/895-9595
800/888-9515
Rochester, MN 507/701-0199
Duluth, MN 218/727-8611
800/888-9535
Virginia, MN 218/741-9011 800/752-4304
Sioux City, IA 217/252-0538 800/633-9104
Des Moines, IA 515/282-0404 800/555-1445
Cedar Rapids, IA 319/363-9655 800/616-6615
East Moline, IL 309/755-7203 800/633-9114
www.casey-equipment.com
1603 East Algonquin Rd. Arlington Heights, IL 60005
847/437-8686
16754 New Ave. Lemont, IL 60439 630/257-1261
1548 Huntwood Drive
Cherry Valley, IL 61016
815/332-8222
www.rmsrentals.com
12520 Quentin Ave S. Suite 100
Savage, MN 55378
952/895-9595
800/888-9515
FAYAT Group Announces Completion of Acquisition of North Carolina’s LeeBoy
FAYAT Group announced the completion of its 100 percent stake in LeeBoy, based in Lincolnton, N.C., and renowned for its line of asphalt paving and maintenance equipment.
For more than 60 years, LeeBoy has powered the world of asphalt with its asphalt pavers, distributors, brooms, chip spreaders and related equipment.
LeeBoy is now part of the FAYAT road equipment division, bringing the FAYAT Group division’s total production facilities to 30 sites across Europe, Asia and the Americas.
The LeeBoy acquisition will significantly expand and strengthen the road equipment division’s asphalt and road building equipment offerings, especially in the commercial and municipal paving and road maintenance market segments.
Enjoying a long and rich history as one of the most iconic names in the North American asphalt commercial paving industry, LeeBoy will maintain its brand identity and operational autonomy, so it can continue delivering the products and services customers trust.
FAYAT — a family business with decades- long experience in the civil works construction equipment sector — plans to support LeeBoy’s management team with both short- and long-term investments to further strengthen its market position and reinforce its commitment to outstanding customer support.
The North American market is a strategic priority for the FAYAT Group, and this tactical acquisition broadens the company’s product offering in the United States and Canada. LeeBoy enables FAYAT to reinforce its leading position in North America through leveraging synergies of asphalt brands currently a part of the road equipment division, including BOMAG, Dynapac, Asphalt Drum Mixers (ADM), Ravo, Scarab, Dulevo, Charlatte and, most recently, Mecalac.
Speaking on completing the acquisition, FAYAT Group President, JeanClaude Fayat said, “Adding LeeBoy’s highly respected equipment offering will enable FAYAT to better serve road-building customers with a more comprehensive range of solutions. The acquisition presents many opportunities for collaboration with other brands within our road equipment division in the areas of research and development, manufacturing, technology, purchasing, sales and exploring select international markets.
“We are dedicated to investing in the LeeBoy team and the local workforce, and to building on LeeBoy’s strong culture to deliver even greater value and innovation in the years ahead for LeeBoy customers.”
Alps Pavement Rehabilitation Project Uses Vögele Mini 500 Paver, Helicopters for Feed
“The job was spectacular even before the actual paving,” said Iwan Hachen, paving foreman.
“Transporting a road paver by cable car is not an everyday occurrence for us either. The Mini 500 is extremely compact and was extremely practical in terms of the requirements for this project.”
Material Feed By Helicopter
Another challenge was the delivery of materials. The contractor used a helicopter to transport the hot asphalt to the paver as quickly as possible. It took the mix from the Thermo trucks 2300 ft. below the construction site and transferred it directly into the material hopper of the Mini 500 at intervals of just under four minutes.
Equipped with the AB 135 extending screed, including bolt-on extensions, the Vögele paver paved the 1.6 in. thick surface course over a width of 5.9 ft. — in several strips in some
The helicopter transferred the mix directly into the material hopper of the Vögele paver.
cases. The closely timed material transfer enabled a constant paving process. This enabled the construction team to complete the surfacing work, including
the paving of the verge, in just two days.
For more information, visit wirtgen-group.com/en-us/.
4344 Poplar Level Road Louisville, KY 40213 502-456-4050 Indianapolis, IN 317-247-9125 Clearfield, PA 814-765-8500 Evansville, IN 812-867-6661
Fort Wayne, IN 260-482-3681
Prestonsburg, KY 606-874-2104
St. Louis, MO 314-487-8925 Columbus, OH 614-636-4050 Cinncinnati, OH 513-321-7833
Nitro/Charleston, WV 304-755-7788
Twinsburg (Cleveland), OH 216-393-7833
Pittsburgh/Leetsdale, PA 412-741-1731
ALPS from page 58
Vögele photo
FAYAT Group logo
Southeastern Equipment Co., Inc. www.southeasternequip.com
North Canton, OH 330-494-3950 Perrysburg, OH 419-874-0331
5105 Loraine Street Detroit, MI 48208 313-710-6908
56195 Pontiac Trail New Hudson, MI 48165 248-665-8488
G 3283 S Dort Hwy Burton, MI 48529 810-484-0669
3725 Old 27 S. Gaylord, MI 49735 888-928-4485 1061 Stepke Court Traverse City, MI 49685 231-642-9637
2917 Ashmun Street Sault Sainte Marie, MI 49783 888-348-1953
8840 Byron Commerce Dr SW Byron Center, MI 49315 616-345-5499
18405 115th Avenue Orland Park, IL 60467 888-508-3903
420 Nolen Drive South Elgin, IL 60177 888-658-4890
2500 Westward Drive Spring Grove, IL 60081 815-581-9819
613 E Stevenson Road Ottawa, IL 61350 815-587-7399
1035 Wylie Drive Bloomington, IL 61705 309-808-6602
www.cpower.com 4501 West Irving Wichita, KS 67209 316-943-1231
1285 Acraway Garden City, KS 67846 620-765-3118
1944-B North 9th Street Salina, KS 67401 785-825-8291
1920 Thielen Avenue Colby, KS 67701 785-462-8286
3305 S West Street Wichita, KS 67217 316-789-7370
1900 Plumbers Way Liberty, MO 64068 806-415-6700
Madison (Sun Prairie) 1900 W. Main St. Sun Prairie, WI 53590 608-837-5141 Milwaukee 12101 W. Silver Spring Dr. Milwaukee, WI 53225 414-462-9790
Green Bay (De Pere) 1031 Lawrence Dr. De Pere, WI 54115 920-336-5711
La Crosse (West Salem) 451 W. Avenue N. West Salem, WI 54669 608-786-2644
Stevens Point (Plover) 5429 Prairie Dr. Plover, WI 54467 715-254-2777
Racine (Mount Pleasant) 1609 SE Frontage Rd. Mt. Pleasant, WI 53177 262-898-6700
2900 Bicycle Street Sparta, WI 54656 608-351-2101
2235 Ragu Drive Owensboro, KY 42303 270-683-2000 4923 Rockwell Road Winchester, KY 40391 859-759-4404
6104 Sable Mill Court Jeffersonville, IN 47130 812-850-6160
A Workhorse To Depend On
High Performance, Quality Results
The CP100II sets the standard for versatility, component lifecycle and mat quality. With a powerful 100 horsepower engine, an array of configurations and the class-leading Carlson EZCSS single slide screed, it’s easy to see why the CP100II is the ideal choice for heavy-duty commercial paving.
The Carlson CP100 II sets the standard for versatility, component lifecycle and mat quality. With a powerful 100hp engine, an array of configurations and the class-leading EZCSS single slide screed, it’s time to see why the CP100 II has fast become the contractor’s choice for heavy-duty commercial paver platforms.
2019 Rosco Max 2B distributor, 1950 gallons, Max 2B computer, 12 ft spray bar, diesel burners, Freightliner M2, Cummins 6.7L dse eng, auto trans, front tires new- $149,000
2016 Rosco Max 2B distributor, 1950 gallons, Max 2B computer, 12 ft spray bar, diesel burners, INTL 4400, Cummins 6.7L dsl eng, auto trans - $130,000
New Marathon TPS250PT tack distributor, Briggs gas eng, 10GPM pump, 250 gal, spray wand w/50 ft hose on reel, Recirculation plumbing, 12 gallon waste recovery tank, propane burners, flushing system w/10 gallon tank - $18,650
330-799-1800 (Rental) Zanesville, OH 740-453-0563 740-455-8400 (Rental) Richwood, KY 859-372-4665
859-282-4343 (Rental)
Pikeville, KY
606-437-6265
Jackson, OH 740-286-7566
Belle, WV 304-949-6400
Crab Orchard, WV 304-253-2706
Nitro, WV 304-759-6400
Parkersburg, WV 304-424-0200
2019 Weiler P385B track paver, 8-16 ft electric heated vibratory screed, All new screed plates, 9 ton hopper, Cat dsl eng, steel tracks - $84,000
Fenton, MO 636-343-5900 Cape Girardeau, MO 573-332-1122
Columbia, MO 573-442-6880
Foristell, MO 636-673-2530
2019 Weiler P385B track paver, 8-16 ft electric heated vibratory screed, 9 ton hopper, Cat dsl eng, steel tracks 70% - $69,000
Joplin, MO 417-624-3010 Springfield, MO 417-866-6651
Willow Springs, MO 636-680-1359 Salem, IL 618-548-1400
Mt. Carmel, IL 636-680-1514
Troy, IL 636-660-0029
Milwaukee, WI 414-461-9100
Eau Claire, WI 715-874-5100
Green Bay, WI 920-498-8000
La Crosse, WI 608-783-4891
Madison, WI 608-271-6200
Superior, WI 715-398-9696
Wausau, WI 715-359-6220
Marquette, MI 906-475-4191
RAISSING THE STANDARD IIN
The Worldwide Leader in Concrete Paving Technology
GOMACO offers the full range of concrete slipform pavers, curb and gutter machines, trimmers, placer/spreaders, texture/cure machines and bridge/canal finishing equipment. GOMACO equipment features our exclusive and proprietary G+® control system, created in-house by our software engineers from the wants and needs of contractors paving in the field. At the heart of GOMACO equipment is our passion for concrete and our commitment to our customers. We look forward to visiting with you about your upcoming paving projects and your concrete paving equipment needs. Our worldwide distributor network and our corporate team always stand ready to serve and assist you.
Liberty, MO
816-415-6700 Springfield, MO
417-865-0505
St. Louis, MO
314-427-4911
Garden City, KS 620-765-3118
Salina, KS
785-825-8291
Colby, KS 785-462-8211 Wichita, KS 316-943-1231
Oklahoma City, OK 405-324-2330 Tulsa, OK 918-984-6565
Grand Forks, ND 701-772-5006 Devils Lake, ND 701-662-5331 Williston, ND 701-572-5050
Trimble Announces Martin Equipment as Technology Outlet for Ill., Iowa, Mo.
Trimble announced Sept. 9, 2025, that Martin Equipment is the newest Trimble Technology Outlet. Headquartered in Goodfield, Ill., Martin will now sell Trimble grade control, site positioning systems and correction services technology directly to customers using John Deere and Wacker Neuson earthmoving equipment, including dozers, excavators, motor graders, soil compactors, miniexcavators and compact track loaders.
Trimble Technology Outlets are a new and important part of Trimble’s civil construction distribution strategy. By adding authorized resellers representing a wide variety of manufacturers to the Trimble distribution channel, it becomes easier for users of a wide variety of machine types to purchase, install and utilize Trimble technology for improved jobsite productivity and profitability.
As an authorized Trimble reseller, Martin now sells Trimble technology directly to its customers in central Illinois, eastern Iowa and northeast Missouri.
“Martin Equipment has built a reputation for exceptional service for nearly 100 years, and we are excited to announce that service will now include the sale and support of Trimble technology for their customers in the Midwest,” said Ron Bisio, senior vice president, field systems of Trimble. “Our goal with every new Trimble Technology Outlet is to make it as easy as possible for contractors using various types of equipment to connect their digital and physical worlds and increase jobsite productivity and profitability through the use of Trimble technology. We look forward to working with Martin to make this vision a reality for their customers.”
Martin Equipment will now offer Trimble grade control solutions — including site positioning systems and correction services — directly to customers across the Martin footprint. Martin customers can expect to receive a superior level of support, including installation, service and training, according to the company.
announced Sept. 9, 2025,
location serves Benton, Iowa, Johnson, Keokuk, Linn, Poweshiek, Tama and Washington counties.
murphytractor.com
Park City, KS 316-942-1457
Great Bend, KS 620-792-2748
Humboldt, KS 620-473-7020
Olathe, KS 913-298-7373
Topeka, KS 785-233-0556
Ulysses, KS 620-356-1071
Dodge City, KS 620-227-3139
Gering, NE 308-436-2177
Omaha, NE 402-894-1899
Lincoln, NE 402-467-1300
Grand Island, NE 308-381-0741
North Platte, NE 308-534-7020
Kansas City, MO 816-483-5000 Springfield, MO 417-863-1000
Des Moines, IA 515-263-0055
Fort Dodge, IA 515-576-3184
Sioux City, IA 712-252-2753 Waterloo, IA 319-235-7085
“Our commitment to delivering exceptional service is matched by the strength of the brands we represent.
We’re excited to expand that promise with the addition of Trimble technology for John Deere and Wacker Neuson
equipment,” said DeLene Bane, president and owner of Martin Equipment. “Contractors managing mixed fleets have long faced challenges in fully leveraging technology that is available. By offering integrated sales, support and service for Trimble, we’re helping our customers overcome those barriers and discover new efficiencies. We look forward to working with them to streamline workflows and drive smarter, more connected operations.”
“Our goal is to make technology work for our customers — not the other way around,” said Jeremi “JB” Briggs, integrated technology manager of Martin Equipment. “With the addition of Trimble, we’re helping crews get more done with less hassle. It’s all about giving them smarter tools that make their dayto-day easier and more productive.”
For more information, visit martinequpment.com and trimble.com.
www.westsidetractorsales.com
Bemidji, MN 218-759-1996
Duluth, MN 218-722-7456
Grand Rapids, MN 218-326-9427
Ashland, WI 715-682-5522
Chippewa Falls, WI 715-834-2924
Merrill, WI 715-536-0633
Escanaba, MI 906-789-9054
Marquette, MI 906-789-7689
Fenton, MO
636-349-0200
Foristell, MO 636-463-2500
Mt. Vernon, IL 618-244-6800
Mitchell, IL
618-931-1034
Cape Girardeau, MO 573-334-0563
Paducah, KY 270-554-1131 Cuba, MO 573-885-0500
Owensboro, KY 270-684-2339
Evansville, IN 812-473-0484
Kingsport, TN 423-349-5001
Knoxville, TN 865-546-3207
Chattanooga, TN 423-855-0633
Nashville, TN 615-501-8600
Bowling Green, KY 270-842-3400 Louisville, KY 502-253-3721
Lexington, KY 859-788-3950
London, KY 606-862-8447
Martin Equipment photo Headquartered in Goodfield, Ill., Martin Equipment will now sell Trimble grade control, site positioning systems and correction services technology directly to customers.
Martin Equipment photo Trimble
that Martin Equipment is the newest Trimble Technology Outlet.
www.brookstractor.com
Madison (Sun Prairie), WI
608-837-5141
Milwaukee, WI 414-462-9790
Green Bay (De Pere), WI 920-336-5711
La Crosse (West Salem), WI
608-786-2644
Stevens Point (Plover), WI 715-254-2777
Racine (Mt. Pleasant), WI 262-898-6700
Sparta, WI
608-351-2101
www.lec1.com
Ashland, KY
606-327-1709
Pikeville, KY
606-432-0321
Marietta, OH
740-373-5255
Cowen, WV
304-226-3299
Beaver, WV
304-255-1525
Elkins, WV
304-636-6421
Cross Lane, WV
304-204-1818
www.martinequipment.com
Goodfield, IL
309-965-2502
Peru, IL
815-224-4711
Rock Island, IL
309-787-6108
Springfield, IL
217-528-4347
Tolono, IL 217-485-6755
Cedar Rapids, IA 319-365-0515
Dubuque, IA
563-588-1950
Columbia, MO
573-657-2154
Palmyra, MO
573-769-2274
Diamond Equipment Inc.
1501 Lynch Road • Evansville, IN 47711 800-258-4428 • 812-425-4428
120 Flex Park Drive • Bowling Green, KY 42103 800-489-1061 • 270-781-1061
17035 North IL Hwy 37 • Mt. Vernon, IL 62864 800-388-6396 • 618-242-2273
1285 Acraway Street • Garden City, KS 67846 620-765-3118
127 NW Hwy 270 • Woodward, OK 73801 580-256-6014 www.cpower.com
12770 W. Silver Spring Drive • Butler, WI 53007 262-781-4970
4621 Dutch Mill Rd. • Madison, WI 53716 608-221-8300
3101 French Rd. • De Pere, WI 54115 920-343-6496
www.kelbebros.com
Luby Equipment Services
2300 Cassens Drive • Fenton, MO 63026 636-343-9970
199 Airport Road • Cape Girardeau, MO 63702 573-334-9937
2999 Mexico Road • O’Fallon, MO 63366 636-332-9970
921 1st Street • Fairmont City, IL 62201 618-397-9971
4375 Camp Butler Road • Springfield, IL 62707 217-744-2233
2625 North 24th St. • Quincy, IL 62305 217-222-5454
www.lubyequipment.com
General Equipment & Supplies, Inc.
4796 Rice Lake Road • Duluth, MN 55803 218-297-1105
4600 Valley Industrial Blvd S • Shakopee, MN 55379 952-224-1500
www.generalequip.com
Contractors, Insurance Providers Try to Navigate Risk
Pressure is increasing on both contractors and their insurance providers to zero in on “robust risk mitigation strategies” to improve insurance programs.
A willing and healthy insurance market is a necessity if public infrastructure projects are to be built, wrote Michael Bradford of riskandinsurance.com.
“Insurance is absolutely critical,” Bradford quoted Aldo Fucentese, chief underwriting officer of Liberty Mutual’s practice serving large contractors. “A lot of different lines come into play, and, if you don’t have surety capacity, you can’t even get started.”
Industry Continues to Navigate Choppy Seas
Risk management firm Marsh polled contractor clients and found that construction entities use a range of methods to address risk.
They’re sharing risks with suppliers and subcontractors; negotiating stronger contract terms; and increasing risk cost contingency budgets, the firm blogged.
“Risk conditions remained challenging for contractors in the first half of 2025,” posing “significant” threats to project timelines and budgets, it noted. “Contractors are increasingly confronted with the dual challenge of managing rising costs while maintaining competitive bids.”
Marsh learned that United States construction contractors’ top three risks are related to labor, finances and the supply chain. The firm said attracting and retaining skilled workers remains the top concern for the domestic construction industry.
That said, more than half of the contractors surveyed indicated they intend to increase staffing levels over the next six months, noted Marsh.
Businesses want the best talent, but there are barriers to attracting younger workers, including the physically demanding nature of many construction jobs. That, coupled with potentially hazardous working conditions and limited career advancement opportunities, has younger workers ignoring the career field.
“Additionally, the lack of flexible work arrangements and the need to travel to job sites may further deter qualified candidates,” wrote Marsh.
These challenges force contractors to get inventive when it comes to attracting skilled workers. Investments in training and development, apprenticeships and mentorship programs and continuing education opportunities are solutions that empower.
“Further, creating a strong safety culture and prioritizing employees’ health can help
foster loyalty and reduce turnover rates,” said Marsh. “Investing in technology can also help make construction careers more appealing, particularly to tech-savvy younger workers.”
Marsh noted that as the size and complexity of construction projects grow the financial stakes for contractors also escalate.
In competition, many firms wind up bidding on projects with incomplete information, committing to pricing based on a fraction of the design documents.
“This practice can lead to unrealistically low bids resulting in substantial losses,” said the firm. Cost overruns can erode profits and jeopardize finances.
“In some cases, contractors may attempt to recover a portion of losses through change orders,” straining relationships and leading to disputes, blogged Marsh.
As projects become more capital-intensive, contractors increasingly rely on loans or lines of credit to fund operations.
A comprehensive understanding of financial risks and a robust strategy to manage and transfer becomes more critical for sustaining growth and profitability.
“Delay in startup (DSU) coverage, for example, can protect against financial losses resulting from project delays,” said Marsh.
This in turn helps contractors recover lost income due to unforeseen interruptions.
“Having a robust insurance program can also enhance a contractor’s creditworthiness,” according to the firm’s blog post.
That’s because lenders often view comprehensive coverage as a sign of financial responsibility, it said.
Often unpredictable supply-chain issues that can disrupt projects call for a proactive
sit, helping contractors recover losses if damage is sustained.”
DSU coverage can provide financial protection against losses incurred due to project delays caused by supply chain disruptions, according to the blog post.
Your Broker Is in Same Boat
Contractors rely heavily on insurers to finish transportation construction projects. When these issues crop up, the underwriting community is there.
Bradford of riskandinsurance.com talked with Marcus Henthorn about infrastructure in particular.
“There are quite a few headwinds right now when it comes to getting infrastructure off the ground, and, obviously, to insure it properly,” said Henthorn.
approach to supply management, said Marsh. That includes a clear understanding of both direct and upstream suppliers, and the risks associated with sourcing materials from various locations.
“Transparency and regular communication with suppliers can facilitate the anticipation of potential disruptions,” said the insurance provider.
Establishing strong relationships with suppliers and gaining insight into their operations, capabilities and potential vulnerabilities, can help with both.
Identifying risk early on enables the development of contingency plans, said Marsh. Contingencies, in turn, can mitigate the impact of project disruptions.
“For example, if a supplier is experiencing delays in securing critical materials, contractors can explore alternative sourcing options.”
They also can seek to adjust project timelines to minimize setbacks, suggested the blog post.
“Diversifying suppliers can reduce reliance on a single source, with the added benefit of allowing contractors to potentially negotiate better pricing.”
Better pricing could ultimately contribute to improved project outcomes, it said.
“Further, knowing the geographic location of both direct and upstream suppliers can help identify and address aggregation risks.”
Marsh believes a robust insurance program is essential, given the ability of complex supply chains to increase the risk of losses.
“Cargo coverage, for example, can safeguard materials and equipment during tran-
The managing director of insurance provider Gallagher said the risks faced by contractors make it harder to understand their true exposure. This includes when a project is going to finish and what it’ll ultimately look like, said Henthorn. “That concern translates into the underwriting community.”
The potential for catastrophic weather means geography and project type are key factors in how underwriters few infrastructure projects, said Henthorn.
In the Risk and Insurance article, he said issues such as contaminants make wastewater and stormwater systems difficult to insure.
“Some of the dams, bridges and tunnels are starting to be more scrutinized, with some special underwriting and more questions,” Henthorn said. “It’s more time consuming from a placement perspective, but it’s not that there isn’t adequate coverage in the marketplace.”
Tamika Puckett said brokers and insurers are concerned with infrastructure risks in major metropolitan areas that could be vulnerable to natural catastrophes.
Puckett is the national public sector division leader of insurance provider Willis Towers Watson.
Wherever airports and public works projects are seemingly ongoing, arranging coverage for tight infrastructure is a hunt for capacity, she said.
“You only have so many carriers that are willing to insure large mega-projects,” she said in Bradfords’ Risk and Insurance article. “Putting together sufficient limits can be difficult if several projects need limited insurance capacity.”
One solution brokers have found is to ask others to take larger shares of coverage on infrastructure projects, said Darron Johnston of insurer Amwins.
Adobe Stock photo
U.S. construction contractors’ three biggest risk-related issues have to do with labor, finances and the supply chain.
www.altaequipment.com
844-GO2-ALTA
18405 115th Avenue Orland Park, IL 60467
420 Nolen Drive South Elgin, IL 60177
26354 N US Hwy 12 Wauconda, IL 60084
480 Blaine St. Gary, IN 46406
613 E Stevenson Road Ottawa, IL 61350
1035 Wylie Drive Bloomington, IL 61705
www.lubyequipment.com
2300 Cassens Drive Fenton, MO 63026 636-343-9970
199 Airport Road Cape Girardeau, MO 63702 573-334-9937
2999 Mexico Road O’Fallon, MO 63366 636-332-9970
2625 North 24th Street Quincy, IL 62305 217-222-5454
4375 Camp Butler Road Springfield, IL 62707 217-744-2233 921 1st Street
Fairmont City, IL 62201 618-397-9971
www.tristatebobcat.com
1200 Highway 13 East Burnsville, MN 55337 952-894-0894
588 Outpost Circle Hudson, WI 54016 715-531-0801
71 Minnesota Avenue Little Canada, MN 55117 651-407-3727
3000 Dillon School Drive Zanesville, OH 43701 740-313-0087
13117 Middletown Industrial Blvd. Louisville, KY 40223 502-245-1911
1309 Cahill Drive Lexington, KY 40504 859-254-3936
51 Harvest Drive Elizabethtown, KY 42701 270-506-4530
13350 Service Rd. Walton, KY 41094 859-449-7272
50th Avenue West
Inc.
7344 S. Frontage Road Sheboygan, WI 53081 920-564-6555
Shawnee Avenue Kansas City, KS 66105 913-371-0868 St. Louis, MO 314-771-6666 Park City (Wichita), KS 316-744-2061 Oklahoma City, OK 405-577-2222
Equipment Co. www.ronsonequipment.com
18030 Wicker Avenue Lowell, IN 46356 219-696-5680
10761 West Coulter Road Westville, IN 46391 219-785-2909
Gold 100 Awards...
Trade Show Executive Names Equip Expo Finalist in Four Award Categories
Equip Exposition was named a finalist in four categories for Trade Show Executive’s Gold 100 Grand Awards.
Equip Exposition was named a finalist for “Best Use of Technology and Data,” “Best New Launch,” the “Against All Odds Award,” and “The Greatest Trade Show of 2024” by the publication, which covers the exhibits industry.
“The Grand Awards recognize the most impactful shows in the country. These nominations are a testament to the hard work of our team, and the effort they put in to evolve Equip each year based on attendee feedback,” said Kris Kiser, president of OPEI, which owns and manages Equip Exposition. “Equip Expo continues to deliver gold-standard programming and events for our attendees and exhibitors.”
Since OPEI took management of the trade show inhouse and rebranded it in 2022, Equip has been nominated for 12 Grand Awards and has brought home trophies for “Most Innovative Show” and “Best New Idea.”
This year marks the fourth time in a row Equip’s trade show floor has sold out — the fastest in history. The awardwinning and 5th largest trade show in the United States saw a record-breaking 28,500 registered contractors, dealers and manufacturers last year.
“Nowhere else can you see all the industry’s technology in one place,” Kiser said. “The most efficient way to see the industry’s innovations is to come to Equip Exposition — it’s where you can see the latest smart technologies for lighting, equipment, irrigation, safety and more.”
In the 30-acre outdoor demo yard, attendees can “get their hands dirty” by mowing, mulching, cutting, chopping, digging, driving and more with the latest equipment. They also can get behind the wheel and try out the latest fourwheel workhorses on the newly expanded UTV test track which offers a track with mud, rocks and curves.
Equip provides landscapers, dealers, contractors, hardscape experts and outdoor power equipment manufacturers a unique platform to learn from each other through peer topeer networking events and unique classroom, training and education sessions.
There’s a welcome reception at Churchill Downs sponsored by Caterpillar, a Wednesday night 4th Street Party sponsored by the Propane Education and Research Council and a Thursday concert with Big & Rich and Gretchen Wilson at the Kentucky International Convention Center sponsored by Gravely, and more.
For more information, visit equipexposition.com.
Volvo Marks 80 Years of Remanufacturing
As a force in the development of sustainable transportation solutions, Volvo Group is celebrating 80 years of remanufacturing components for its on- road, off-road and marine applications.
The remanufacturing program, which launched in 1945 in Ko ̈ ping, Sweden, is supported in North America today by operations in Middletown, Pa., and Charlotte, N.C.
“Remanufacturing is a cornerstone of the Volvo Group’s sustainability journey and has been since the first renovated gearboxes were produced in 1945,” said Stephen Roy, chairman of Volvo Group North America. “Not only does this initiative play a significant role in reducing our environmental impact by minimizing waste, but it also supports our customers by providing reliable Volvo-quality parts at a lower cost. We are proud to have two key U.S. facilities contributing to this important work.”
In addition, every remanufactured component comes with a 100 percent warranty on parts and contingent damage, as well as a 100 percent warranty on labor when installed by an authorized dealer.
Remanufacturing also supports the Volvo Group’s carbon footprint reduction effort, as remanufacturing uses up to 85 percent less raw material and 80 percent less energy than new production.
Volvo Group is celebrating 80 years of remanufacturing components for its onroad, off-road and marine applications.
Every remanufactured component undergoes a stringent inspection, evaluation and remanufacturing process to ensure it meets exacting specifications, according to Volvo.
This includes electromagnetic crack detection, precision machining, expert recovery and welding techniques, calibration with certified gauges and dynamic testing, all completed by certified technicians.
BRANDEIS
MACHINERY & SUPPLY COMPANY
www.brandeismachinery.com
1801 Watterson Tr. Louisville, KY 40299 502/491-4000
Bowling Green, KY 270/780-3004 Corbin, KY 606/528-3700 Lexington, KY 859/259-3456 Stanville, KY 606/478-9201 Paducah, KY 270/444-8390 Evansville, IN 812/425-4491 Indianapolis, IN 317/872-8410 Ft.Wayne, IN 260/489-4551
ROAD BUILDERS
MACHINERY & SUPPLY CO., INC.
www.roadbuildersmachinery.com
1001 S. 7th St. Kansas City, KS 66105 913/371-3822 Omaha, NE 402/331-9200 Lincoln, NE 402/325-0447 Grand Island, NE 308/384-2620 Norfolk, NE 402/316-2606
Today, Volvo maintains one of the most extensive remanufactured product inventories in the industry, covering more than a dozen key categories including engines, transmissions, coolant pumps, cylinder heads and turbochargers. In North America, remanufactured products are available for Volvo Trucks, Mack Trucks, Volvo Penta, Volvo Construction Equipment, Volvo Buses and Prevost.
“Our commitment to remanufacturing isn’t just about business — it’s about responsibility,” said Sherman Williams, Volvo Group North America’s remanufacturing product development director. “We are proud to offer our customers a solution that not only meets their needs but also aligns with their values. By investing in remanufactured parts, they are making a positive impact on the environment and supporting a more sustainable future for us all.”
For more information, visit volvogroup.com/na.
ROAD MACHINERY & SUPPLIES CO.
www.rmsequipment.com 5633 W Hwy 13 Savage MN 55378 952/895-9595 • 800/888-9515 Rochester, MN 507/701-0199
echnologTe gy
o e pr Maximiz
inate potential damage peed qu , cr erators up to s our machines y omfr s Intelligent M Komastu’ our job si y on y oductivit
efully design w and car e c ) ol (IMC r achine Cont anced autom tes with adv yg . ned plans ou an help y ation
face to design sur uickly
Snow and Ice Section
Hilltip Announces New Stainless-Steel Truck Spreader
Hilltip has introduced its IceStriker 4500 SSA/SSC stainless-steel salt spreader offering a 4.5-cu.-yd. capacity for use on trucks with a minimum rating of 15,000 GVWR.
Designed for precision and maximum corrosion resistance, the new model is ideal for contractors looking to increase the efficiency and effectiveness of their winter maintenance services, according to Hilltip.
The IceStriker 4500 comes with Hilltip’s HTrack tracking software, which uses two-way GPRS communication for remotely tracking and managing all software-installed spreaders. This technology allows customers to monitor driving routes, vehicle
speed, GPS location and material usage in real-time from a comput er, tablet or smartphone. Job sites and material rates can also be set remotely. The software can gen erate highly detailed reports for documentation purposes, as well.
Also available is the new StrikeSmart Plus controller, which works in conjunction with Hilltip’s TempStriker sensor to monitor real-time weather forecasts and surface conditions. It uses this data to recommend the ideal materials and spread rates for maximum effectiveness. It also can automate the spreader’s settings to ensure proper material rates are applied.
modate a variety of needs, the IceStriker 4500 can be powered by either 12- or 24-volt dual motors. Model 4500 SSA comes with a 6in. stainless-steel auger, or cus-
Hilltip introduced its IceStriker 4500 SSA/SSC stainless-steel salt spreader offering a 4.5-cu.-yd. capacity for use on trucks with a minimum rating of 15,000 GVWR.
submerged in an acid bath for clean welds and surfaces. The stainless-steel finish is easy to clean and maintain while enhancing material flow of bulk sand and gravel, bulk or bagged salt or sand/salt mixes.
SSC, which uses a 14-in. pintle chain system to deliver material to the spinner.
For long-lasting corrosion resistance, the hopper body is entirely
Other standard features include a flip-up chute, vibrator, inverted V and vibrator. Options include LED work lights, strobe lights, brake lights and a tarp kit.
For more information, visithilltipna.com.
Holms Attachments to Distribute Zoom Plows in America
Holms Attachments AB and JPT Serco Oy announced a cooperation to sell the Serco Skaala Zoom plows to the North American markets through the United States based Holms, Inc.
The SERCO brand has its roots in Finland’s Ostrobothnia, where the manufacture of road maintenance devices began in 1994. This is the first cooperation between the two companies and the first time Serco products have been available to the market. Inventory is already in place in Hickory, N.C.
Adjustable Width Snow Pusher Is Game Changer
The Skaala plows are fixedwing plows that can be hydraulically widened. Closely resembling a snow pusher, these units are different because the width can be adjusted on-the-move.
“There’s no product in our market that allows operators the flexibility to adjust widths,” said Dan Snedecor, president and GM of Holms, Inc. “Snow pushers are popular for clearing large areas but the width is limited by road lane widths when moving from site to site, with the Serco you can, for example, have a 15foot-wide pusher that reduces to less than 8 feet for travel and transport.”
Different Approach
Instead of traditional spring edges or floating blade sections all Serco Skaala Zoom Plows are equipped with spring-loaded side wings and a floating, springloaded quick coupler with suspension dampeners. This simple but clever solution insures that the plow will stay on the ground on uneven surfaces and conform to the shape of the surface while
providing the brute force needed for breaking up hardpack and ice, according to the company. The cylinders are powerful enough to open and close the plow under load while plowing.
Complimentary Product
Carl Gindahl, CEO of Holms Attachments AB said, “In Scandinavia, we consider Serco a respected rival and competitor. In this case, we are cooperating to provide our U.S. entity Holms, Inc. with a product that Holms does not manufacture and suits the North American market very well.”
Juha Kumlander, managing director of Serco JPT Oy said, “We are happy to enter the North American market in this way. Holms is a respected and longterm player in the industry and the cooperation will benefit both companies.”
Hilltip Corp. photo
Holms Inc. photo Holms Attachments AB and JPT Serco Oy announced a cooperation to sell the Serco Skaala Zoom plows to the North American markets through the United States based Holms Inc.
John Deere Offers Path Snow Removal Mapping Solution
John Deere introduced John Deere Path, a mapping solution designed to help operators navigate snow removal operations with precision.
Snow-covered roadways present significant challenges, making it critical for operators to clear them effectively. With John Deere Path, operators gain a better sense of road edges and boundaries, when pre-mapped, even in tumultuous winter weather conditions, according to John Deere
“Snow removal, especially in rural areas where visibility can be hindered, requires accuracy for safe and efficient operations,” said Matt Costello, product marketing manager, John Deere. “With a large percentage of U.S. roads located in snow-prone regions, John Deere Path is designed to give operators the confidence to navigate snow-covered roads, helping them stay on course to complete their work safely and reliably.”
Built on the technology of the John Deere StarFire receiver and G5 display technologies, John Deere Path, an option on John Deere motor graders and other
plow equipment, provides operators with the ability to pre-map road boundaries before snowfall, creating precise guidance routes automatically sent to the John Deere Operations Center. During snow events, near real-time maps help operators maintain alignment with road edges, with audible alerts warning if the equipment moves too close to pre-mapped boundaries, helping to reduce accident risks and infrastructure dam-
age.
The G5 universal display provides a clear, intuitive interface for confident navigation. Operators can visualize road edges and follow a guidance track overlayed on satellite imagery, with a visual error bar alerting them to deviations and excessive drift. When road boundaries and obstacles are pre-mapped, the system also enhances obstacle awareness, such as mailboxes and curbs, while
enabling operators to track and document completed work for efficiency, according to John Deere. Points of interest can be added at any time for changes on route or marking potential road maintenance areas after snow.
John Deere Operations Center plays a critical role in snow removal management. All mapped routes and completed work data are seamlessly integrated into the platform. John Deere Operations
Center provides insights into total area plowed, machine location, duration of work and fuel usage when available, allowing fleet managers to make informed decisions and efficient resource allocation, according to John Deere. John Deere Path is available as two optional solutions to meet the needs of a variety of operations.
John Deere Path is specifically designed for John Deere motor graders, offering integration with machines from model year 2016 and newer. For customers with mixed fleets and older models, John Deere Path Universal offers a modem for a fully closed-loop system, making it compatible with a variety of other machines like plow trucks.
By leveraging advanced mapping and precision technology, John Deere Path delivers a way to manage snow removal operations. With enhanced accuracy, improved operator awareness and integrated fleet management capabilities, John Deere Path helps keep roadways clear and communities moving.
For more information, visit JohnDeere.com.
Blue Diamond Now Offers Full Lineup of Snow Removal Tools
The Blue Diamond Attachments Parts and Accessories division announced an expanded line of replacement work tool wear parts solutions for the snow removal industry, providing both end users and dealers access to a wide range of parts and accessories geared specifically for contractors in snow states.
The solutions can be found and ordered 24 hours a day at BDAParts.com.
The Blue Diamond Parts and Accessories division has ramped up its commitment to customers by offering a one-stop-shop for all replacement needs. Most replacement parts and accessories are in stock and ready to ship. Parts specifically available in the snow removal space include:
The full lineup of snow parts and accessories can be found at the BDAparts.com website and most of the Blue Diamond offering are universal and work across multiple manufacturer attachments
“Snow removal can be very hard on an attachment, especially when the surface is rough or not visible to the operator,” said Darren Barnes, director of products of Blue Diamond Attachments. “When something breaks, downtime is not an option. We stock the critical parts contractors need — and most ship same day — getting that customer back up and moving snow, so they can get on to the next job.”
Blue Diamond parts and accessories come with the Blue Diamond Satisfaction Guarantee and a standard 1-year warranty (some exceptions may apply).
For more information, visit BDAparts.com.
Blue Diamond Attachments photo
John Deere photo
John Deere introduces John Deere Path, a mapping solution designed to help operators navigate snow removal operations with precision.
AINLE S H AIG R T S T S S T & A
With limited mo motion, the WE plow moves sno stocking deale
ving parts and full hydra ESTERN PRO-PLOW 3 s ow season after season r near you to learn mo ulic range of traight blade . Contact a re.
MGX EQUIPMENT SERVICES
Bloomington, MN
952-888-2525
ABC RENTALS
St Paul, MN
651-451-2264
COUNTRY SIDE SERVICES
Ramsey, MN
763-441-4943
MINNEAPOLIS MOTOR SPORTS
Minneapolis, MN
763-634-0244
NORTH CENTRAL BUS & EQUIPMENT
St Cloud, MN 402-333-0655
NORTHLAND FARM SYSTEMS
Owatonna, MN 507-451-3131
PODS TIRE
PERRY'S TRUCK REPAIR
Long Lake, MN 952-473-4898
PRECISION LANDSCAPING & CONSTRUCTION
Hastings, MN 651-437-2305
RECTECH OUTDOOR SOLUTIONS Plato, MN 952-686-8711
FIND A DEALER NEAR YOU
SELL
RUS L''S AU North Branch 651-674-4000
SNOW PLOWS Waverly, MN 763-682-5536
ST BONI MOT
St Bonifacius, 952-446-1554
UTOMOTIVE h, MN 0 S PLUS INC 6 TOR SPORTS , MN 4
'S V
DICK VAALLE Y SERVICE
y
Apple Valley, , MN
952-432-2848
L-Z TRUCK EQUIPMENT
St Paul, MN
651-488-2571
White Bear Lake, MN 651-426-4640
PPMI
Rochester, MN 507-252-8097
RULE TIREL
Willmar, MN 320-235-114
Sanco Equipment sancoequipment.com
2317 Consul St. Albert Lea, MN 56007 507-373-4490
12251 B 265th St. Mason City, IA 50401 641-450-7126
630 Schumann Dr. NW Stewartville, MN 55976 507-285-0753
2333 7th Ave. Mankato, MN 56001 507-625-4511
Manke’s Outdoor Equipment mankeoutdoor.com
225 West Rose Street Owatonna, MN 55060 507-451-2327
Tri-State Bobcat tristatebobcat.com
1200 Highway 13 East Burnsville, MN 55337
952-894-0894
71 Minnesota Avenue Little Canada, MN 55117 651-407-3727
588 Outpost Circle Hudson, WI 54016 715-531-0801
2018 US Highway 8 St. Croix Falls, WI 54024 715-557-6010
Bobcat of Brookings bobcatofbrookings.com
803 Main Ave South Brookings, SD 57006 877-338-5544
BUCK & KNOBBY EQUIPMENT CO. www.buckandknobby.com
6220 West Sterns Road Building #2 Ottawa Lake, MI 49267 855-213-2825
Bruggink’s Inc. www.brugginks.com
7344 S. Frontage Road Sheboygan, WI 53081 920-564-6555
CONSTRUCTION MACHINERY COMPANY www.cmcky.com
2911 S English Station Rd Louisville, KY 40299 502-267-4020 6104 Sable Mill Court Jeffersonville, IN 47130 812-850-6160
2235 Ragu Drive Owensboro, KY 42303 270-683-2000
DITCH WITCH OF MINNESOTA & IOWA ditchwitchmnia.com
12826 Emery Way Shakopee, MN 55379 800-252-5811
1320 Frontier Drive Fergus Falls, MN 56537 800-492-4801
1520 Blue Sky Blvd. Huxley, IA 50124 515-685-3521
VERMEER MIDWEST vermeermidwest.com
2801 Beverly Drive Aurora, IL 60502 630-820-3030
1801 179th Street N. East Moline, IL 61244 309-751-9540
120 East Martin Drive Goodfield, IL 61742 309-965-3300
915 Fournie Lane Collinsville, IL 62234 618-407-3860
621 Spirit Valley E. Drive Chesterfield, MO 63005 636-532-2332
13402 Britton Park Rd. Fishers, IN 46038 317-842-1040
3310 W. Coliseum Blvd. Fort Wayne, IN 46808 260-484-2494
3566 Citadel Circle Newburgh, IN 47630 812-490-4400
940 Garden Lane Fowlerville, MI 48836 800-336-3889
1098 Franklin Street Marne, MI 49435 616-677-5900
2319 Plum Valley Rd. NE Mancelona, MI 49659 231-258-1290
9127 Airport Highway Holland, OH 43528
Covering Northeast Ohio 8155 Roll & Hold Pkwy. Macedonia, OH 44056
Wrench www.companywrench.com
4805 Scooby Lane Carroll, OH 43112 740-654-5304
920 Deneen Avenue Monroe, OH 45050 513-649-8105
1330 KY - 151 Frankfort, KY 40601 502-699-2681
1515 W. Epler Avenue Indianapolis, IN 46217 317-782-8850
3600 N. Grand River Ave. Lansing, MI 48906 517-321-8000
600 44th Street S.W. Grand Rapids, MI 49548 616-538-2400
65809 Gratiot Ave. Lenox, MI 48050 586-727-7502 4600 AIS Drive Bridgeport, MI 48722 989-777-0090
8300 M-72 East Williamsburg, MI 49690 231-267-5060
56555 Pontiac Trail New Hudson, MI 48165 248-437-8121 Continental Equipment Corp. www.ceceq.com
401 Shawnee Avenue Kansas City, KS 66105 913-371-0868 Option 2 North Star JCB www.northstarjcb.com
Sievers JCB www.sieversjcb.com
406 Old Rt 66 Hamel, IL 62046 618-633-2622
8080 State Rt 16 Hillsboro, IL 62049 217-532-3222 State Route 267 South Greenfield, IL 62044 217-368-2486
11715 W Silver Spring Road Milwaukee, WI 53225 888-276-4365
14464 Shad Rd Carlinville, IL 62626 217-854-3191
1351 W Jackson St Auburn, IL 62615 217-438-6111
7978 Veterans Pkwy. St. Peters, MO 63376 636-281-4450
7001 Manufacturers Drive Madison, WI 53704 888-276-4365 YES Equipment & Services, Inc. www.buyjcb.com
crane, Series 2 Counterweights, LSI/LMI system w wireless load links, Self-Erect option, Luffing jib & Aux drum Prepped, AC & Heated Cab, Request Boom & Jib Combo, Cleveland, Ohio CALL Contact Sales Dept 440-439-4749 sales@craneandshovel.net
2018 ASV RT40, S/N: PKDS003730,
Business Calendar
To view our Business Calendar online, go to www.constructionequipmentguide.com.
ASSOCIATED GENERAL CONTRACTORS (AGC)
AGC Events Calendar:
All AGC Web-Eds are scheduled in Eastern Standard Time (EST). Conferences are scheduled using the local time zone where the event takes place.
• AGC EDGE Construction Supervision Fundamentals https://edge.agc.org/course/vcsf251001/)
Dates: Thursday, October 2, 2025 (12:00 PM) –Friday, October 17, 2025 (4:00 PM)
Online, Virtual
Training/Professional Development
• AGC Advanced Project Manager Course
Start Date: Sunday, October 5, 2025 (4:00 PM)
End Date: Tuesday, October 7, 2025 (3:00 PM) Arlington, Virginia
Training/Professional Development
• AGC EDGE Communication (STP Unit 2)
Start Date: Monday, October 6, 2025 (4:00 PM)
End Date: Tuesday, October 21, 2025 (8:30 PM)
Online, Virtual
• AGC EDGE Real-World Al for Construction Firms
Start Date: Wednesday, October 8, 2025 (1:00 PM)
End Date: Friday, October 24, 2025 (5:00 PM)
Online Virtual
Training/Professional Development
• AGC EDGE Construction Site Logistics with Bluebeam
Date: Thursday, October 9, 2025
Time: 4:30 PM – 8:30 PM
Online, Virtual
Training/Professional Development
• AGC EDGE Contract Documents (STP Unit 4) Saturdays
Start Date: Saturday, October 11, 2025 (9:00 AM)
End Date: Saturday, October 25, 2025 (2:30 PM)
Online Virtual
Training/Professional Development
For more information:
AGC Phone Number: 703/548-3118
AGC Fax Number: 703/842-8817
EXPO SOURCE EXPO
Detroit Michigan Facilities Maintenance Expo
Date: October 2, 2025
Time: 9:00 AM – 2:00 PM
Place: VISTATECH CENTER 18600 Haggerty Road, Livonia, MI 48152
Facilities Maintenance Expo
This Expo delivers a quality audience of plant engineers and building maintenance professionals who are ready to buy.
Job titles for previous show attendees include: Facility Managers, Building Owners/Managers, Plant Engineers, Maintenance Personnel, Production Supervisors, Purchasing Managers, Buyers, Managers/Owners Safety Supervisors and more.
Benefits of Participating in a Facilities Maintenance Expo:
• Show actual product instead of catalog photos
• Demonstrate products to give your prospects hands-on experience
• Attendees are a captive audience
• Prospects will come to you
• No carrying heavy equipment from prospect to prospect
For more information, contact Expo Source Expo
Phone: 513/444-4828
OHIO FORESTRY
ASSOCIATION
The Paul Bunyan Show 2025
Dates: October 3 – 5, 2025
Place: Guernsey County Fairgrounds 335 Old National Road Lore City, OH 43755
Phone: 740/489-5888
About the Show
We strive to improve the success and competitiveness of business within the industry, while enhancing the quality of life and of individuals, families and communities.
The Paul Bunyan Show provides research, products, services and hands-on experiences through education, exhibits, presentations, competitions and demonstrations – all related to forest products related industries, as well as natural resources and outdoor lifestyles.
Show Activities Include:
• Heavy Equipment Demonstrations
• Arborist Skills Clinics and Demonstrations
• Chainsaw Carvers and Artists
• Sawmill Demonstrations
• All the latest and greatest forest-industry equipment, supplies and services
• Wood Auction
The Paul Bunyan Show aims to provide public access to the most current information and technology for the forest products industry.
• Wood Craft and Carver Demonstrations
Fabulous Food and FALL FAMILY FUN!
• CRAFTS
• LUMBERJACK COMPETITIONS
• EQUIPMENT DEMONSTRATIONS
The Official Paul Bunyan Show features many exciting lumberjack and forestry competitions, educational experiences, demonstrations, and just plain fun!
For more information: Ohio Forestry Association Phone: 888/388-7337
ASSOCIATION OF WOMEN CONTRACTORS (AWC)
Our Mission
The Association of Women Contractors provide advocacy, collaboration and industry leadership to support and enrich women-owned companies in the construction industry.
AWC MEMBER MINGLE
October member Mingle – Hosted by Horwitz
Date: Wednesday, October 8, 2025
Time: 3:00 PM – 5:00 PM (CST)
Venue: Horwitz
Address: 7400 49th Avenue N New Hope, MN 55428
Registration will start on Thursday, September 11th at 7:00 AM.
Registration will close on Monday, October 8th at 5:00 PM.
If registration has closed and you still wish to attend, please email admin@awcmn.org.
Member Mingles are our monthly networking events. They are hosted by our members, for AWC members only. On the second Wednesday of each month, we visit a different member’s office for two (2) hours of open-house style networking with your fellow industry professionals. For more information:
Association of Women Contractors (AWC) Phone: 651/489-2221
THE UTILITY EXPO 2025
Dates: October 7 – 9, 2025
Location: Kentucky Exposition Center 937 Phillips Lane Louisville, KY 40209 Phone: 502/367-5000
Event Overview:
The Utility Expo, previously known as ICUEE (International Construction and Utility Equipment Exposition) is the premier event for utility professionals and construction contractors. This biennial expo showcases the latest innovations, equipment, and solutions in the utility industry, making it a vital gathering for industry leaders and stakeholders.
Purpose: The expo aims to connect utility professionals with the latest technologies and innovations, providing hands-on experience and opportunities to network with industry experts.
What to Expect:
Exhibitors: Over 900 companies will showcase their products and services, focusing on electricity, gas, telecommunications, and water utilities.
Interactive Sessions:
Attendees can participate in live demonstrations, workshops, and panel discussions to gain insight into industry trends and best practices.
Networking Opportunities:
The event will facilitate connections among professionals from various insights and opportunities to advance their business and expertise.
For more information: https://www.theutilityexpo.com
NEL Season Three Kicks Off With New Events, Competitors
The National Equipment League (NEL) has launched its third season with two events now available to view online, and new apps and channels launching to expand the league’s viewership.
The NEL — developed in partnership with Hyundai Construction Equipment North America — is a professional sports league built to showcase the skill and character of heavy equipment operators in the construction industry, and to showcase careers in the construction industry in an entertaining and competitive way. Originally launched in 2024, the league has now held two major tournaments and a qualifying event in the lead-up to its third “season,” which will culminate in a champion being crowned just before Utility Expo 2025.
Mike “Dirt Perfect” Simon is the league’s defending champion, while longtime contractor and industry media personality Bryan Furnace was the inaugural champion in 2024. Both men return for “Season Three” with Chris “LetsDig18” Guins, Tom “Dirt Ninja” Gardocki, Madisen McCaulley and Mike Frey rounding out the field.
Mike Frey earned his spot by taking second place in the “Diamond Equipment Qualifier” held at Lincoln Park Speedway in June 2025 — he took second place in that competition. First-place winner Dana Bontrager will take place in a future championship tournament.
“From top to bottom it’s the most competitive field we’ve had, and as the league continues to grow, we’ll bring in more competitors and events to create more opportunities for these skilled tradespeople to show off their talents and inspire future generations,” said Bill Elverman, NEL commissioner. “The audience and the industry have responded positively, and we’re now bringing the league to a wider global audience through Roku and Apple, and hosting bigger and better events with great partners like Hyundai.”
The first two events of Season Three are now available for viewing on YouTube: The Owner-Operator Challenge and the Ski Loader Slalom. And now, for the first time, the NEL is available on popular streaming platforms with its own app that can be found by searching “National Equipment League” on Roku, and also on all Apple devices by searching “National Equipment League” in the Apple App Store — both for iPhones and tablets, as well as Apple TV. The first two seasons of NEL are available to binge on each platform, while each new episode of season three is being released on each platform at the same time as it debuts on YouTube.
Each event is shot and broadcast like all major professional sports and brings the audience along on a roller coaster of wins,
losses, emotions, strategies and complications that deliver legitimate drama over the course of each challenge.
“I’ve said that NEL mixes the passion of mixed martial arts with the attitude of dirt track racing, and the first two seasons and our inaugural qualifying event, paid off on that,” said Elverman. “All while showing the character and camaraderie that exists in the construction industry. There’s really nothing like it, and it makes for compelling competition.”
Elverman encourages viewers to particularly watch for event three of season three —
the Four-in-One Bucket Challenge — which he calls “the best and most entertaining challenge yet” as viewers follow along to see whether Simon retains his title, or if one of the other competitors will rise to the challenge.
Additional promotional partners for NEL include Blue Diamond Attachments, Triple Crown Products, Thunder Creek Equipment and Utility Expo 2025. Each competitor also is sponsored by a construction equipment dealer in the competition. Host sponsors for season three include Diamond Equipment (two competitors), National Equipment
The NEL is a professional sports league built to showcase the skill and character of heavy equipment operators in the
Dealers, Ahearn Equipment, Buck & Knobby and Jet City Equipment.
Hyundai to Host Qualifying Event at Utility Expo 2025
Hyundai also announced that it will host the “Hyundai Utility Expo Operator Challenge” at Utility Expo 2025 — the winner of that event will win $1,000 and a slot in the next big NEL championship event. Qualifying will take place in Hyundai’s booth at the show (K345) on Tuesday, Oct. 7 at 1 p.m. and Wednesday, Oct. 8 at 9 a.m. Finals will be Wednesday at 1 p.m.
Interested participants can sign up to compete in person at the show, and follow along with Hyundai on Facebook for additional information leading up to the show.
“The regional and event-based qualifying structure is something we’ll leverage more to bring new blood into the tournaments and to keep growing the audience,” said Elverman. “Diamond Equipment in Indiana, for instance, has been a great partner in this, and Hyundai is already planning on something special for ConExpo-Con/AGG 2026.
“There’s an inherent competitiveness among equipment operators — they love dissecting problems, they want to know who’s better and they love giving it their all and leaving it all out there in an effort to prove that they’re the best. We’re here to support and amplify that in the interest of growing the construction industry.”
National Equipment League photo
The National Equipment League has launched its third season with two events now available to view online.
National Equipment League photo
construction industry.
WANTED (WORLDWIDE): WESTERN RETEK CRUSHERS, ALL MODELS; LOOKING FOR ANY SPARE PARTS FOR A 2006 WESTERN RETEK IMPACT CRUSHER 1310I.
EMAIL:
WARRUMCONSTRUCTION@ICLOUD.COM
PHONE: 317-71-07390
WANTED (CA); BUSH HOG PLOWS, ALL MODELS. NEED PLOWS- PREFER BRUSH HOG. WILL PAY TOP DOLLAR WHOLE OR PARTS.
EMAIL: TOMTOMGOFORIT@YAHOO.COM
WANTED (TX): HITACHI EX270-1 EXCAVATORS. LOOKING TO PURCHASE THE FOLLOWING EQUIPMENT (BOTH RUNNING & NON-RUNNING): WHEEL LOADERS (CATERPILLAR): 950B|950E|966E|966F; GROVE CRANES: RT880E|RT8890E; EXCAVATORS (HITACHI): EX200LC|EX270LC|EX300LC|EX/ZX330L C|EX370LC|EX400LC|EX450LC-5; WHEELED EXCAVATORS (JOHN DEERE): 495D|595D; MOTOR GRADERS (CATERPILLAR): 12G|130G|140G|140H; BACKHOES: CATERPILLAR|CASE; PAVERS (VOGELE).
WANTED (US): CATERPILLAR 140G MOTOR GRADERS, LOOKING TO PURCHASE A RANGE OF HEAVY CONSTRUCTION EQUIPMENT AND WOULD APPRECIATE RECEIVING YOUR BEST OFFERS FOR THE FOLLOWING MODELS, RUNNING OR NON-RUNNING: CAT WHEEL LOADERS: 950B 950E 966E 966F HITACHI EXCAVATORS: EX200LC EX270LC EX300LC EX330LC EX400LC EX450LC-5 JOHN DEERE WHEELED EXCAVATORS: 495D 595D CAT MOTOR GRADER: 140G CAT AND CASE BACKHOES VÖGELE PAVERS: S1800 S1900 CEDARAPIDS ROLLERS/PAVERS.
EMAIL: ILYAS.MTCPK@GMAIL.COM PHONE: 0923322489350
WANTED (US): JOHN DEERE 850K SMARTGRADE CRAWLER DOZERS, BULLDOZER 850KLGP JOHN DEERE SMART GRADE «3D« ENC CAB WITH WINCH 36 INCHES SIX WAY UNDER 1200 HOURS REAL HOURS METER AND FRAME NO JUNK NO WEB MUST BE USER«CONTRACTOR« OR PAYMENT OUT« OR SUCCESSION.
WANTED (US): CATERPILLAR D8K CRAWLER DOZERS. TRYING TO LOCATE D8K DOZER WITH SPACER PLATE ENGINE, RIPPER AND PUSH BLADE.
EMAIL: IUKANDCO@GMAIL.COM
WANTED (US): CATERPILLAR TH62 TELEHANDLER. LOOKING FOR A BROKEN, NON-RUNNING CATERPILLAR TH62 TELEHANDLER. I HAVE ONE AND WOULD LIKE TO BUY ONE FOR PARTS.
WANTED (US): KOMATSU 270-8 WHEEL LOADERS - LOOKING FOR KOMATSU WA270 OR WA200 WHEEL LOADERS WITH THE FOLLOWING CRITERIA: HOURS: UNDER 5,000 (PREFERRED), BUT HIGHER HOURS ARE ACCEPTABLE AT A LOWER PRICE. YEAR: BETWEEN 2014 AND 2018. BUDGET: AROUND $75,000, DEPENDING ON CONDITION AND HOURS. EMAIL: AMERICAUSEDEQUIPMENT@ GMAIL.COM
WANTED (CA): CATERPILLAR 966F II WHEEL LOADERS - LOOKING TO BUY ANY CATERPILLAR DISMANTLED MACHINES – WHEEL LOADERS, EXCAVATORS, BACKHOES, DOZERS OR MOTOR GRADERS, ANY MODEL. EMAIL: FEEDBACK@GCESEQUIPMENT.COM; PHONE: +1 (657) 274-8033
WANTED (PA); MANUFACTURER: INTERNATIONAL 250-C CRAWLER LOADER. LOOKING FOR A MACHINE IN ANY CONDITION OR IN ANY STATE. EMAIL: HARLOWCONTRACTING@YAHOO.COM; PHONE: 267-738-5984
WANTED (WA): CATERPILLAR 420E BACKHOE LOADER. INTERESTED IN PURCHASING THE FOLLOWING CATERPILLAR BACKHOE MODELS: CAT MODELS: 416C, 416D, 416E, 420D, 420E, 420F ST, 420F, 420F IT, 420F2, 420F2 IT. ALSOLOOKING FOR CASE BACKHOE MODELS: CASE MODELS: 580M, 580SM, 580N, 580SN. PLEASE PROVIDE DETAILS ON THEIR CONDITION, OPERATING HOURS & PRICING.
EMAIL: JANDWINS@GMAIL.COM; PHONE: 425-286-8778
WANTED (GA): RYAN MODEL 2070
GRAPPLE
EMAIL:
BOBBYSHELTON1983@GMAIL.COM; PHONE: 678-323-5647
WANTED (WORLDWIDE) CATERPILLAR CRAWLER DOZER, MODEL D11 / D11T CD. GOOD WORKING CONDITION. EMAIL: HYESUNG_KIM@NAVER.COM; PHONE: 822-425-6601
WANTED (US): JOHN DEERE CRAWLER DOZER, MODEL 550K LGP. NEED BULLDOZER, 550K LGP JOHN DEERE 2020 – 2023, ENC. CAB 24 INCHES WITH WINCH, UNDER 700 HOURS METER AND FRAME.
WANTED (US): STERLING DUMP TRUCKS, ALL MODELS; LOOKING FOR A ROTARY HI RAIL DUMP TRUCK, PRE EMISSIONS, ANY MAKE/MODEL. EMAIL: MURPHYCONTRACTORS@YAHOO.COM
PHONE: 860-324-9693
WANTED (OH): FREIGHTLINER DUMP TRUCKS, ALL MODELS. LOOKING FOR A ROTARY HI-RAIL DUMP TRUCK, PRE EMMISSIONS, ANY MAKE/MODEL. EMAIL: MURPHYCONTRACTORS@YAHOO.COM PHONE: 860-324-9693
\WANTED (US): CUMMINS GENERATORS, ALL MODELS. LARGE PORTABLE OR STATIONARY GENERATORS IN ANY CONDITION — CAT, CUMMINS, DETROIT, MTU, PERKINS, VOLVO (DIESEL OR NATURAL GAS) CAN REMOVE IF NEEDED. EMAIL: MICHSURPLUS@GMAIL.COM; PHONE: 201-679-6437
WANTED (WORLDWIDE): KOMATSU WHEEL LOADERS, MODELS WA 600-3 AND WA 600-6 2014 OR UP MODELS. EMAIL: IUKANDCO@YAHOO.COM; PHONE: +923331234598
WANTED (PA): CAT OR CASE BACKHOE LOADERS, ANY CONDITION. EMAIL: DEALER.SALES11@GMAIL.COM; PHONE: 717-621-3470
WANTED (US): MISC. CATERPILLAR ATTACHMENTS. LOOKING FOR RELIABLE IT COUPLER ATTACHMENTS & JOHN DEERE 644K FORKS (JRB COUPLER) TO ENHANCE OUR CONSTRUCTION OPERATIONS. ITEMS REQUIRED TO BE IN GOOD, WELL-MAINTAINED CONDITION. PREFERRED ATTACHMENTS ARE SIDE DUMP BUCKETS (LEFT AND RIGHT), BROOM ATTACHMENT, EXTENDABLE BOOM ATTACHMENT FORKS. PHONE: 484-781-2958
EMAIL: JWALSH@JAMESTOHARAINC.COM
WANTED (WORLDWIDE): DRESSER 125E CRAWLER DOZERS - LOOKING FOR A COMPLETE BOSCH VA PUMP OR HEAD AND ROTOR. EMAIL: CRAIGBERENS944@GMAIL.COM
WANTED (FL): COTTRELL TRAILERS, ALL MODELS. EMAIL: WILFREORLANDO@GMAIL.COM
WANTED (US): JOHN DEERE BROOMS / SWEEPERS, ALL MODELS. MID-SIZED JOHN DEERE OR HYUNDAI EXCAVATOR PLUMBED AND WITH CONCRETE PULVERIZER. EMAIL: NEWYORKCWS@YAHOO.COM; PHONE: 973-956-8854
WANTED (PA): NEW HOLLAND ATTACHMENTS - 7614 LOADER ATTACHMENT FOR NH TRACTOR. EMAIL: KEVCOOKENTERPRISES@GMAIL.COM; PHONE: 814-386-5541
WANTED (US): ALL MODELS DITCH WITCH VACUUM/EXCAVATION EQUIPMENT EMAIL: BILL@DITCHWITCHNEWMEXICO.COM
WANTED (US): KAWASAKI WHEEL LOADERS 85ZV , 90ZV , 90ZIV , 95ZV. ALSO SEARCHING FOR KOMATSU WA470-3 , WA600-3 , WA600-6. RUNNING OR NON-RUNNING CONDITION. EMAIL: ALADNANENT@GMAIL.COM PHONE: +923445757577
WANTED (NC); CLARK ECX 25 FORKLIFT. EMAIL: JBSSERVICES37@GMAIL.COM
ALEX LYON & SON AUCTIONEERS
www.lyonauction.com
315-633-2944
• Online
Sept. 26 – Oct. 3, 2025
For: Retirement Auction. Snow Removal Equipment & more
• Greenville, TX
Tues., September 30, 2025
For: Rental Fleets –Construction/Utility Equipment & more
• Syracuse, NY
Thurs., October 2, 2025
For: Equipment & 130+ Acres of Open Land
• North Attleborough, MA
Sat., October 4, 2025
For: Late Model Snow & Construction Equipment Auction
• Tonawanda, NY
Thurs., October 9, 2025
For: Large Demolition Construction Company Auction
• Torrington, CT
Fri., October 10, 2025
For: Construction, Demolition, Ag & Trucking Company Auction
RITCHIE BROS. AUCTIONEERS
www.rbauction.com
402-421-3631
• White Bluff, TN
September 27, 2025
• Rocky Mountain Regional Event
October 1 – 2, 2025
• US Crane Event
October 7, 2025
• Northeast Regional Event
October 8 - 9, 2025
• Sacramento, CA
October 8 - 9, 2025
• San Antonio, TX
October 9, 2025
ABSOLUTE AUCTION & REALTY, INC.
www.AARauctions.com
800-243-0061
• Online
Ends September 29, 2025
For: Lewis County Surplus Auction
• Online
Ends September 29, 2025
For: Salt Point, NY Vehicle Auction
• Online
Ends September 30, 2025
For: Accord, NY Equipment Auction
• Online
Ends September 30, 2025
For: Lake Katrine, NY Trailer Auction
AUCTIONS INTERNATIONAL
www.auctionsinternational.com
800-536-1401
• Online September 16 - 30, 2025
For: Online Auctions Closing Daily!
Auctioneers websites for details
Coming Auctions
To view our complete list of upcoming auctions visit our Auction Calendar at www.constructionequipmentguide.com
BAR NONE AUCTION
www.barnoneauction.com
866-372-1700
• Online Sat., October 11, 2025 For: Sacramento, CA Monthly Public Auction
BIDADOO AUCTIONS www.bidadoo.com 1-877-BIDADOO
• Online
September 30, 2025
• Online October 7, 2025
BIG IRON AUCTIONS www.bigiron.com 800-937-3558
• Online October 1, 2025
• Online October 8, 2025
DAVIS AUCTIONS, INC. www.davisauctionsinc.com 203-758-4087
• Prospect, CT Sat., September 27, 2025 For: Construction Auction
DUNN DEAL AUCTION CO. www.dunndealauctions.net 614-946-6853
• Lebanon, OH Sat., October 18, 2025 For: Fall Cincinnati Heavy Equipment, Truck & Trailer Auction
YODER & FREY HEAVY EQUIPMENT AUCTIONS www.yoderandfrey.com 419-865-3990
• Crane County, TX Thurs., October 9, 2025
For: Heavy Equipment Auction
• Findlay, OH October 16 - 17, 2025
For: Heavy Equipment Auction
Don Smock Hosts 33rd Annual Fall Auction in Pendleton, Ind.
Don Smock Auction Company (DSA), Indiana’s leading heavy construction auction company, hosted its 33rd Annual Fall Truck and Equipment auction on Sept. 12 at its corporate headquarters, 6531 South State Road 13 in Pendleton, Ind.
This year’s event featured more than 1,200 lots and drew bidders from across North and South America. Buyers were able to participate both in person and online through DSAauctions.com.
Enhancing Buyer Experience
Understanding that its customers are busy professionals who value efficiency, DSA has invested heavily in creating the best possible buyer experience. For this auction, the company expanded to a fourring format to streamline the sale. By splitting “Ring 3” into two — one for new attachments/mini-excavators and another for support equipment — and moving miscellaneous items to an online-only ring, DSA successfully reduced wait times for bidders.
In addition, the company’s in-house DSAauctions.com bidding platform continues to make the process smoother by offering streamlined registration, bidding and checkout, along with a discounted buyer’s premium.
Building On Legacy
As a second-generation auctioneer, Nic Smock is dedicated to carrying forward the values established by his father, Don Smock.
“Dad built this business on honesty and integrity, and we strive every day to continue his legacy,” Nic said. “Technology changes constantly, and our team is committed to finding the best software and systems to help our customers buy and sell assets with confidence.”
DSA’s brand presence has grown tremendously online, now attracting more than two million visitors annually to its social media platforms and servicing more than 40,000 members in its email database, powered by AuctionSphere.
see SMOCK page 95
Don Smock Auction’s 33rd annual fall sale brought together industry leaders and partners, including Nic Smock and Natalie Spain of Construction Equipment Guide.
A large crowd gathers around small equipment and tools
Inside the drive-through auction building, a Cat 50D off-road truck sells to the highest bidder.
Mike Gray of Gray & Son Plumbing browses equipment at Don Smock Auction’s Fall auction in Pendleton, Ind. He was excited to buy some attachments and excavators during the sale.
Jeremiah Morrow (L) and Cody Demoret of J. Morrow Construction check out a lineup of mini-excavators before the sale gets under way at Don Smock Auction’s Fall auction.
as bidding heats up.
Wheel loaders, dozers and excavators are staged and ready for bidders on auction day.
The Don Smock Auction rolling auction truck keeps the sale moving across the yard.
Second Generation Builds On Legacy of Don Smock, Expands Its Services
Brian Welker (L) and Dustin Welker of Precision Excavation in Logansport, Ind., review an International truck before it crosses the auction block at Don Smock Auction’s Fall auction.
SMOCK from page 94
Expanding Services
In addition to equipment auctions, DSA is seeing strong growth in its real estate division and appraisal services.
“We have tripled the number of properties we’ve listed or sold at auction,” Nic said. “We believe in provid-
(L-R): Gary Koger, Dustin Weber and Derek Koger of Koger Inc. take in the action from a utility vehicle, catalog in hand and ready to place their bids.
ing the right solution for every customer, whether it’s real estate, equipment or personal property.”
Looking Ahead
With its commitment to innovation, customer service and family values, DSA continues to lead the industry as
Indiana’s premier heavy construction auction company, according to the company. For more information, visit DSAauctions.com. (All photographs in this article are Copyright 2025 Construction Equipment Guide. All Rights Reserved.)
Retirement Auction
Friday, October 17, 2025 Norton, Ohio
Location: 2925 Barber Rd, Norton, OH 44203
Note: After 78 years in business, Lee & Aubrie Gangle have decided to retire and sell their clean equipment. Online bidding details at freyauctions.com
Terms: 10% buyer premium on items $2500 and less, 2% items over $2500. Pay in full sale day, all items sold as-is, where-is.
Risks Contractors Face Make Insuring Projects Difficult
INSURANCE from page 76
Finding adequate liability coverage for infrastructure projects has been a particular problem, per Aldo Fucentese of Liberty Mutual.
“That has probably been the biggest pain in the market,” said Fucentese, chief underwriting officer of the firm’s practice serving large contractors.
U.S. insurers hesitate to cover a class of business known for attracting litigation that sometimes results in huge awards, he said.
Bradford noted in his post that the cost of construction has risen dramatically in recent years. That and the economy make costs a big concern for public entities.
Kevin McDowell, vice president of Arch Insurance, said that fitting those needs into established budgets can be difficult for public entities.
“Market dynamics driving increases in costs of construction will be a challenge for public owners.”
From the insurer’s perspective, the goal is to ultimately deliver a better product to the construction client, said Johnston.
“As the public entity sector is dealing with some of this heartburn right now, we’re all working to generate more capacity that can support this space.”
Fucentese noted that the excess and surplus lines market can step in when admitted insurers pull back. But contractors should carefully study these insurers.
“You have to be very careful about how the policy is built and what type of exclusions you have,” he said. “Coverage might be cheaper, but it might not provide all the coverage
you need.”
Insurers that offer surety bonds guaranteeing jobs are done according to specifications and everyone gets paid are finding plenty of opportunity.
That bodes well for contractors as there is plenty of capacity available in the surety market, said Stephen Ruschak, executive vice president of Arch Insurance.
But the bottom line is the risk landscape is difficult, said
insurance provider Marsh. Complex bidding and contracting add to the list of threats.
So do elevated challenges due to severe weather events and the potential repercussions of cyber threats. These factors, beyond labor, finances and the supply chain, underscore the need for proactive risk management strategies, said Marsh.
“There is a growing imperative to strengthen risk mitigation efforts and optimize insurance programs.” CEG
kubotacentral.com 1285 Acraway Street Garden City, KS 67846 620/765-3118
COLUMBUS EQUIPMENT COMPANY www.columbusequipment.com
2329 Performance Way Columbus, OH 43207 614/443-6541 12500 Williams Road Perrysburg, OH 43551 419/872-7101
7570 New Carlisle Pike Dayton, OH 45424 937/879-3154
7225 Grand Ave. Gurnee, IL 60031 224/699-2200
1966 N State Rt. 1 Watseka, IL 60970 815/432-3965 4620 W US-6 Morris, IL 60450 815/942-6620 21730 LaGrange Rd Frankfort, IL 60423 815/658-2682 McCullough Kubota www.mckubota.com
