October 2016 Advertiser

A #

208

The

November 1st 2016 #09208

Component Manufacturing dverti$er

Serving the Structural Building Components Industry

YOUR NEW SAW ONLY NEEDS ONE GUY

BUT COMES STANDARD WITH A TEAM.

Our state-of-the-art saws include the technology to cut any truss or panel member with speed and precision. They also include an entire support team. Your MiTek Machinery Tech Reps are real people available on the phone, as well as on-site, ready to help keep your saws humming and your presses rolling. You might even consider Š 2016 MiTek, All Rights Reserved.

them productivity, personified.

Visit MiTek-US.com to find out more about your personal support team.

A

Th e

Component Manufacturing dverti$er Inside

Published Monthly Publisher Thomas McAnally twm@componentadvertiser.org

Editor Anna L. Stamm 800-289-5627 x 3 anna@componentadvertiser.org

Distributed FREE Via e-mail subscription Download PDF or Read on line at www.componentadvertiser.com News of Interest and Advertising inquiries can be submitted to: anna@componentadvertiser.org An Open Forum for many sources.

Deadline is the 25th of each month.

(20th for new Advertisers) Articles, Trade Names, and Logos are the property of their respective owner or creator unless otherwise noted Disclaimer: We reserve the right to refuse any advertisement or material that we deem not in the interest of the industry or the Advertiser. The Advertiser is provided “As Is” including typographical errors, omissions, and mistakes both intentional and unintentional.

Believe it at your own risk!

Copyright 2008-2009-2010 -2011-20122013-2014-2015-2016

Component Manufacturing Advertiser The Advertiser a division of

JobLine, Inc.

the

610 Briar Way Ln St. Johns, FL. 32259

no reproduction in whole or in part without permission from the component advertiser eMagazine Reading options You have two options with the Advertiser, 1 or 2 page display. For smaller screens, tablets and phones, we offer a 1 page link in the weekly notice. If you open this in two page, you can easily change to one page by clicking on the control Icon. Don’t forget the PDF download option on our website.

Archive Copies Available On Line www.componentadvertiser.com

New & Used Equipment .............................................................................6 Saws

Truss Equipment ................................................................21

Panel Equipment ............................................................... 33

Trucks & Trailers ............................................................... 42

Misc. Equipment ............................................................... 43

Door and Stair Equipment .................................................48 Lumber Market ............................................................................. 50 The JobLine Hiring Zone ..............................................................54 ............................................................... 55

Available Jobs

Available Candidates ........................................................56

Design Team Suite ............................................................58 ............................................................... 60 Calendar of Events News & Announcements ............................................................... 69 ............................................................... 73 Letters to the Editor

Articles ................................................................. 4 Question of the Day ................................................................. 8 Sean Hubbard - SQ-1 ............................................................... 12 Advertiser Forum Todd Drummond Consulting, LLC ...............................................24 ............................................................... 27 Glenn Traylor Keith Dietzen - Keymark ...............................................................34 Robert Glowinski - AWC ..............................................................51 ............................................................... 53 Matt Layman - LLG Ben Hershey - 4Ward Consulting ..................................................62 Randy Shackelford, PE, SE – Simpson Strong-Tie .....................64 Safety First Topics in English/Spanish ..........................................68 .............................................................73 Don Cernuto Frank Woeste, PE., PHD ............................................................. 74 ............................................................... 75 The Last Word

Advertiser Directory Acceptance Leasing & Financing ............................................42,48 Acer, Inc ........................................................................... 26,47 Eagle Metal Products ............................................................... 22,31 Eide ........................................................................... 30,32 Fitzgerald Group ..................................................................... 19,49 Keymark Enterprises ............................................................... 34,35 MiTek | USP ........................................................................ 2,75,76 Panels Plus ........................................................................... 33,41 Simpson Strong-Tie ..........................................4,10,11,64,70 Square 1 ............................................................... .8,9,14,18,20 The Hain Company ..............................................................23,43,46 Todd Drummond Consulting, LLC ............................................24,25 Triad | Merrick Machine ............................................................37,40,71 Vaagen Brothers Lumber .......................................................... 50,52 Wasserman & Associates ...............7,15,29,30,36,38,39,44,45,46,49 Wood Truss Systems .....6,7,13,15,16,17,19,21,23,28,29,32,36,48,49

M ACdverti$er

Th e

omponent

anufacturing

Adverti$er

Don’t Forget!

You Saw it in the

November 1st, 2016 #09208 Page #4

Question of the Day...

As a CM, how do I best convey my intended and assumed scope of work and overall responsibility to all parties involved in the construction of a project I am bidding? I don’t want to be held responsible for something I haven’t bid.

Stan Sias

his is a terrific question and one that deserves revisiting. There are many excellent tools available to assist you and help open the risk management umbrella for you and your company. Probably the hardest part of this is getting everyone within your company to agree to your intended and stated scope, and not waiver from it in the name of being a nice guy for your customer. Once you have a written Scope of Work that both your corporate counsel and liability insurer agree with and provide coverage for, then you’re well on your way. The structural building components industry provides you with many of the other tools you need to protect your interest. Your first and perhaps most widereaching resource is the Building Code itself.

T

In the US, that would be the IBC/IRC as issued by the International Code Council and adopted in the majority of the country. IBC/IRC references our industry design standard, ANSI/TPI 1 (version 2014 being the latest in the 2015 I-Codes).

Without specific language in the project specifications directing bidders elsewhere, or adding/deleting to/from TPI 1, the provisions of TPI 1, Chapter 2 are codified and therefore made an equal part of the project specifications.

Yes, you probably already knew that. The question for you then is this: How are you telling the others involved in the project you are bidding what your assumptions are? My suggestion to you is this: Tell them with every piece of correspondence you have with each party…your Quote/Bid, your Delivery Ticket, and your Invoice. After all, the Building Code references TPI 1, the project specifications by the Building Designer reference TPI 1, so you should join that party – it’s to your distinct advantage!

I suggest adding the following disclosures (or something similar that has been reviewed and approved by your corporate counsel and liability insurer) to your correspondence with any parties involved in the process of review/approval/construction with your trusses. This will go a great distance in drawing the proverbial line in the sand when it comes to your scope of work assumptions as well as serve notice of the building code and project specification mandate for the division of responsibilities of all of the parties involved. You then become the resource for the free online information on not only the Design Responsibilities, but also the best practices for the safe handling, installing, restraining, and bracing of the quoted/supplied trusses.

Jobsite Packages available from SBCA Not only do you want to take the opportunity to highlight and reference ANSI/TPI 1 on all of your correspondence, but you also want to take the same opportunity to start the distribution of the BCSI Summary Sheets included in your Jobsite Delivery Package. Sending this information along in your Quote/ Bid/Submittal correspondence shows your interest in providing the necessary information for safe and efficient storage, handling, and installation of the products you intend to provide.

PHONE: 800-289-5627

Quote/Bid Disclosure This Quote/Bid is offered based upon Plans & Specifications by (Building Designer info here), dated (xx/xx/xxxx, latest plan revision date [possibly also including RFI response dates] here). Further, per the referenced project specifications, the provisions of ANSI/TPI 1 – 2014, the National Design Standard for Metal Plate Connected Wood Truss Construction, shall be in effect. All parties are advised to familiarize themselves and their employees, contractors, sub-contractors, and/or installers, of the division of responsibilities in the design and application of MPCWT construction as defined in Chapter 2 of TPI 1. A free online read-only version of this referenced Standard is available at http://www.tpinst.org/technical-downloads.

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er

Th e

omponent

anufacturing

November 1st, 2016 #09208 Page #5

Adverti$er

Don’t Forget!

You Saw it in the

SAWS

This Quote/Bid submittal also includes the proposed Truss Submittal Package, (proposed Truss Placement Diagram) and BCSI Summary Sheets containing important information pertaining to the safe jobsite storage, handling, installing, restraining, and bracing of the quoted trusses. More information on BCSI, Building Component Safety Information, can be found on the SBCA website at http://support.sbcindustry.com/docs/06_BCSI_booklet_FINAL.pdf.

Delivery Disclosure (with receiver signature required) I declare below that the above items were delivered and received on the jobsite in good condition. I further declare that I am in receipt of the Jobsite Delivery Package that includes the Truss Submittal Package and BCSI Summary Sheets containing important information pertaining to the safe handling, installing, restraining, and bracing of the delivered trusses. More information on BCSI, Building Component Safety Information, can be found online at http://support.sbcindustry.com/docs/06_BCSI_booklet_FINAL.pdf.

Further, per the building code, referenced project specifications and the Quote/Bid & Delivery acceptance, the provisions of ANSI TPI 1 – 2014, the National Design Standard for Metal Plate Connected Wood Truss Construction, shall be in effect. All parties are advised to familiarize themselves and their employees, contractors, sub-contractors, and/or installers of the division of responsibilities in the design and application of MPCWT construction as defined in Chapter 2 of TPI 1. A free online, readonly version of this referenced Standard is available at http://www.tpinst.org/ technical-downloads.

Invoice Disclosure

2005 Hundegger SC-1 Linear Saw 2005 Hundegger model SC-1 linear saw, in operation, includes 90 degree vertical stroke action, stacks boards to four-high, horizontal positioning, stair stringer capabilities, 53-foot infeed and out-feed with second clamping and positioning system, electronic controls and operator console with second/catcher monitor, front computer, hydraulic unit, automated clamping system, ink on one 1 1/2" face, end mill head router option, A/C option for cabinet cooling.

Includes 32 foot small parts and 28 foot scrap conveyors.

Windows XP operating system. Available in December of 2016. Limited warrantee available with OEM installation supervision (at additional charge). $119,990, FOB TN Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Interest of x.x% per month will be charged on all past due invoices. All past due accounts will be charged x.x% per month on entire balance.

Further, per the building code and the referenced project specifications, Quote/Bid & Product Delivery acceptance, the provisions of ANSI TPI 1 – 2014, the National Design Standard for Metal Plate Connected Wood Truss Construction, are in effect for this project. All parties are advised to familiarize themselves and their employees of the division of responsibilities in the design and application of MPCWT construction as defined in Chapter 2 of TPI 1. A free online, read-only, version of this referenced Standard is available at http://www.tpinst.org/technical-downloads.

It has been a long, slow recovery from the bottom of the construction downturn. There are more than a few new folks on the block when it comes to MPCWT construction projects. Many of the experienced players are no longer involved anywhere in the process. There is a vast amount of education that needs to be done and it is the responsibility of all of us to do our part. As we discussed last month in this space, regarding recent code change proposals, there appears to be some question as to whether the built environment is meeting the Building Designer, Truss Designer, Building Code, or Building Owner’s assumptions and expectations. Providing these references and resources at every opportunity will go a long way in fulfilling your duty to warn and provide instruction on the safe use of your products. Your risk management umbrella will stand strong against the winds of challenge when you have done your part.

Thanks for reading, S.

PHONE: 800-289-5627

2004 Hundegger SC-1 Linear Saw 2004 Hundegger model SC-1 linear saw, in operation, includes 90 degree vertical stroke action, stacks boards to four-high, horizontal positioning, 24-foot infeed and out-feed with second clamping and positioning system, electronic controls and operator console with two (2) computers, hydraulic unit, automated clamping system, ink on two faces, vertical mill head router option, a/c option for cabinet cooling and upgraded safety light barrier. Upgraded to Windows 7. No angled conveyor included. Available in December of 2016. Limited warranty available with OEM installation supervision (at additional charge). $119,990, FOB NV Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er

Th e

omponent

anufacturing

You Saw it in the

Wood Truss Systems

manufacturers’

Adverti$er

Don’t Forget!

November 1st, 2016 #09208 Page #6

representatives

New Monet DeSawyer 2000 Component Saw !

W NE $242,000 Base Condition: New Location: MO

New, Monet DeSawyer 2000, computerized, five-bladed component saw, sets up in 15 to 17 seconds, can run in manual mode, downloads projects from a network or manually using display screen controls.

Features all powered movements, cuts from 15" 90/90 cuts to 20 foot length, 2 x 3" to 2 x 12" lumber depths and internal brakes are standard. Options include enhanced servo controls featuring autocalibration, catcher's display and either shaker or belt scrap conveyor and incline. 440 volt, 3 phase electrical. www.woodtrusssystems.com

765-751-9990 PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er

Th e

omponent

anufacturing

November 1st, 2016 #09208 Page #7

Adverti$er

Don’t Forget!

You Saw it in the SAWS

NEW! NEW! New Monet FWA 500 Floor Web Saw New, Monet five-head, floor truss web saw, cuts 4-angle, 4x2 floor truss webs from 16 inches and 90-90 blocks from 12 inches, to four foot long maximum length. Features 10-board magazine feed, powered, fixed-quadrant angulation, manual carriage standard, shaker-pan scrap conveyor with short incline conveyor and cut-off blade. Options available for longer carriage length, single-sided setup (shown in pictures, but not standard), dust hood and choice of shaker or belt scrap conveyor.

440 volt, 3 phase electrical. $49,000 Base Condition: New , Location: MO Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

2005 Razer v4 Linear Saw Six-Axis CNC Linear saw – Currently in operation and consistently upgraded this saw features a 6000 RPM hydraulic saw motor, full axis of motion to complete straight, single/compound bevel and rip cuts with a 13 3/4” blade. Handles material up to 20’ long, 14” wide and 4” depth. OEM supplied in-feed deck and outfeed conveyor with kick-off table are included. Right to Left hand feed configuration. Includes spare blade, encoder, (2) encoder wheels, sensor cables, and all available spare parts.

Includes Windows XP Service Pack two software and transformer for 230 or 600v to system specific 415v, 3Ph, Minimum 100 psi air required. (Ink jet printer shown in pictures is not included.) $49,500 FOB MB Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

New Spida Vector Saw with Mango Plate Marker (FOB IN) $44,975 800-382-0329 | www.wasserman-associates.com

Clary Shortcutter II Model 329 web saw with single sided setup, four blades, includes drag chain waste conveyor with tall incline. Minimum angle approximately 10 degrees, maximum angle 135 degrees. Minimum length cut is 9 inches (90/90), 18 inch 4-angle, and longest length cut is 18 feet. $8,490, FOB IN Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

1988 Speed Cut Saw (1 Phase) with Speed Measure Device • Speed Cut Metra-Cut Centerline Saw • Speed Measure Device • 30’ of Roller Conveyor • Cutting Depth of 6” with 16” Blade • Angular Capacity of 164 Degrees • 5 HP / 230 Volt / 1 Phase Motor • Saw Barrier Guard • Turntable Air Brake • Extra Blades $6,900 FOB SD Wasserman & Associates 800-382-0329 www.wasserman-associates.com PHONE: 800-289-5627

Wood Truss Systems

manufacturers’

2000 Alpine AutoMill RS Component Saw Alpine AutoMill RS model 344, five-blade, computerized component saw. From the OEM literature: sets up in 2 to 19 seconds, using a touch screen for ease of operation.

Five-head automated component saw works in semi-automated control via touchscreen input. It has 19 axes of automated movement, diagnostics, auto management reporting. The RS cuts from 13" to 20' long material in size range from 2x3 through 2x12, and includes [3] 18", [1] 20" and [1] 32" blades with air brakes, pc with swingarm cabinet and scrap conveyor under saw.

480v/60Hz/3Ph power. $31,249, FOB: QC Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

A

Th e

Component Manufacturing dverti$er

Serving the Structural Building Components Industry

Representatives

NEW!

Monet FWA 500 Floor Web Saw

New, Monet five-head, floor truss web saw, cuts 4-angle, 4x2 floor truss webs from 16 inches and 90-90 blocks from 12 inches to four foot long maximum length. Features 10-board magazine feed, powered, fixed-quadrant angulation, manual carriage standard, shaker-pan scrap conveyor with short incline conveyor and cut-off blade. Option for longer carriage length, single sided setup (shown in pictures, but not standard), dust hood and choice of shaker or belt scrap conveyor. 440 volt, 3 phase. $49,000 Base, FOB MO.

765-751-9990 Read/Subscribe online at www.componentadvertiser.com

www.woodtrusssystems.com FAX: 800-524-4982

M ACdverti$er

Th e

omponent

anufacturing

November 1st, 2016 #09208 Page #8

Adverti$er

Don’t Forget!

You Saw it in the

WWW.SQUARE1DESIGN.COM SQUARE 1 DESIGN & MANUFACTURE INC.

DEFINING SUCCESS

WWW.SQUARE1DESIGN.COM Defining success is not always as clear and concise as closing an

equipment contract or for that matter a series of contracts, as we did this year at the BCMC. For Square 1 Design & Manufacture Inc., the BCMC 2016 was nothing short of a success.

All credit is given to our staff for preparing the equipment for what I would consider one of the best showings of my career. We offered to bring all staff members interested in attending. Again, this was a success. The comradery, the pride, and the amazement that I saw was

Sean Hubbard Square 1 Design & Manufacturing

unparalleled to anything that I’ve seen in the factory. Each individual was beaming with pride, believing the equipment they produced was superior to the competition.

Each achievement success in it owns right. individual circumstances definition of success distinctly remember the Although I would not be tradeshow. Square 1

The customer felt like it was a disaster and I felt like it was a calamity of mismanagement and mistakes.

would be considered a tremendous Yet for me, neither of these two defined success at the BCMC. My started about two months ago, and I email as it caught me off guard. able to put it all together until the Design completed an order last year

that was nothing short of a catastrophe. The customer felt like it was a disaster and I felt like it was a calamity of mismanagement and mistakes. I understand every company has a project that they do not want discussed by anyone in the industry, this was that project. A project I thought would forever be an unrecoverable customer; meaning we would never have the opportunity to sell equipment to them again. I believe the customer tends to overlook late deliveries when the equipment functions perfectly out of the box.

They never forget when equipment fails to perform! Regretfully, we rushed the equipment and we shipped early. This resulted in multiple onsite inspections, meetings, email communications well beyond normal and numerous phone calls. The process took months not weeks, complex engineering solutions, and the cooperation of the customer. The equipment has been in operation and functioning for over a year now.

Upon my return from the BCMC, the one story I was eager tell my wife was regarding this customer. I believe the BCMC 2016 was a success for Square 1 Design because that same customer came to our booth, looked me in the eyes, and said “Thank You.” A relationship, at the time, I thought was unrecoverable. Three men stood in our booth and smiled. Those three men were there to inspect a machine that I quoted to the company President. I would like to thank the gentlemen in Kansas for stopping by our booth, I have the utmost respect for each of you. In my opinion, that relationship defines success.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

When the competition comments on the foot traffic in our booth, we know we are doing it right

1-866-647-7771

M ACdverti$er

Th e

omponent

anufacturing

Adverti$er

Don’t Forget!

You Saw it in the

Advertiser Forum

Industry Heroes Anna L. Stamm Director of Communications and Marketing Component Manufacturing Advertiser.

M

any people have commented on the great articles Carl Schoening has contributed to this magazine. Because we don’t have his reflections on industry leaders in this issue, I’ve decided to contribute some of my own. While I am the first person to say “I’m no Carl Schoening” and I don’t have nearly as much experience as he does, I do have a few comments to share.

The Passing of Staton Douthit Industry veteran Staton Douthit passed away in October. No, I never met him – but I used to mail him an invitation to the annual Top Chord Club dinner held in conjunction with BCMC each year. To me, Staton was a legend. Not only had he served as the very first president of the Wood Truss Council of America, but also he recruited members! I don’t recall the final tally of his Top Chord Club points, but it was the top echelon. And while my interactions with Staton were limited, I thought highly of him. You don’t achieve Diamond Club status in the Top Chord Club without actively growing the association – you work for it. I can only imagine that he worked equally hard on all aspects of his business and the association.

Commitment and Dedication in Leaders Whether or not I’ve met someone face to face, I can respect them for who they are, what they have accomplished, and how they show their commitment to a worthy endeavor. True leaders are memorable, and we always learn something from them.

Sometimes, the success of a leader is obvious – they’re recognized with awards or mentioned often as a role model by their peers. Other times, however, leaders continue to work without praise, without recognition, and sometimes even without success. I have known some of those leaders too. And, without naming any names, I have to say that sometimes a leader’s failure has made a bigger impression on me than a success.

Fighting the good fight never guarantees that you’ll succeed. But, a leader knows that you can lose a round without being defeated.

November 1st, 2016 #09208 Page #12 SAWS

2000 Alpine AutoMill RS Component Saw Alpine AutoMill RS model 344, five-blade, computerized component saw. From the OEM literature: sets up in 2 to 19 seconds, using a touch screen for ease of operation.

Five-head automated component saw works in semi-automated control via touchscreen input. It has 19 axes of automated movement, diagnostics, auto management reporting. The RS cuts from 13" to 20' long material in size range from 2x3 through 2x12, and includes [3] 18", [1] 20" and [1] 32" blades with air brakes, pc with swingarm cabinet and scrap conveyor under saw.

480v/60Hz/3Ph power. $31,249 FOB QC Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

New Monet FWA 500 Floor Web Saw New, Monet five-head, floor truss web saw, cuts 4-angle, 4x2 floor truss webs from 16 inches and 90-90 blocks from 12 inches to four foot long maximum length.

Features 10-board magazine feed, powered, fixed-quadrant angulation, manual carriage standard, shaker-pan scrap conveyor with short incline conveyor and cut-off blade.

Option for longer carriage length, single sided setup (shown in pictures, but not standard), dust hood and choice of shaker or belt scrap conveyor. 440 volt, 3 phase. $49,000 FOB MO Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

The People Who Inspire Us Whether you’re new to this industry or have decades under your belt, I’ll bet that, right now as you’re reading this, you’re probably thinking about someone who you consider to be a leader. Maybe it’s an obvious choice, or maybe it’s an unsung hero. Maybe it’s someone whose passion was evident at the state chapter level, or even simply a small community. And maybe you would like to say a few words on a person who you think should be recognized. Two sentences, two paragraphs, two pages – you are welcome to send a submission to me. In sharing your stories, maybe we will all feel a little more inspired.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

MiTek Combi Set Web Saw Four Blades Cut Lengths from 2' to 16'. Waste & Incline Conveyor. Extra Set of Blades. 220/440 Volt - 3 Phase. $13,000 FOB MO. Wasserman & Associates 800-382-0329 www.wasserman-associates.com FAX: 800-524-4982

M ACdverti$er

Th e

omponent

anufacturing

Adverti$er

Don’t Forget!

You Saw it in the SAWS

Wood Truss Systems

manufacturers’

2008 Alpine X4 Linear Saw •Touch Screen Control Panel •5 Axes of Automation •15 HP Motor with 22” Blade •Ink Jet Printer •Auto Feeder (Live Deck) •Outfeed Conveyor •230 Volt / 3 Phase $49,900 FOB AB NOW $39,900 Wasserman & Associates 800-382-0329 www.wasserman-associates.com

1994 MiTek Combi-Cut 4-Blade Saw 1994 MiTek Combi-Cut component saw, model 2000 Combi Cut, serial # CO15, four-head saw with powered angulation, Cuts from 1 foot at 90/90 to 20 foot lengths, angles from 10 to 105 degrees, digital angle readouts, power angulation, power length.

Cuts 4x2, four-angle floor webs from 19".

Includes under-saw waste conveyor (no incline), two extra 16" blades, manual and all available parts. Saw in use until end of January, 2016. 480 volt, 3 phase. $15,990 NOW $13,890 NOW $8,990 FOB MI Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

November 1st, 2016 #09208 Page #13

Representatives

NEW!

New Hundegger Turbo Saw The Hundegger Turbo-Drive saw is a fast, accurate and versatile, fully automated linear saw specifically designed to cut structural component parts. Hundegger continues to stretch the cutting capabilities of our industry by providing a single saw with options that can perform basic drilling, milling and printing operations in addition to 5-axis cutting. $235,963 Nicely Equipped FOB Germany/UT

1996 Auto-Omni 5 Blade Automated Component Saw •Automated Setup as directed by Truss Design Software Output •Computer, Enclosure & Stand •5 Blades cut 2x3 through 2x12 and 4x2 from 11” to 20’ •Ink Jet Printer •Shaker Pan Waste Conveyor (under saw) •Incline Waste Conveyor (adjacent to saw) •Installation Available (quote upon request) FOB WI Wasserman & Associates 800-382-0329 www.wasserman-associates.com

1992 Speed Cut Metra Cut Centerline Saw 1992 Speed Cut Metracut model SSA-17, centerline saw with 12 foot-long Speed Measure, model #645 radial arm saw includes center-point cutting, turntable angle measure, 13'-11" infeed conveyor and 16 inch diameter blade with (1) spare blade. No outfeed rollers. 230/460 volt, 3 phase electrical. $4,490 FOB PA Wood Truss Systems 765-751-9990 www.woodtrusssystems.com PHONE: 800-289-5627

765-751-9990

2004 TCT Model 1100 Linear Saw Cut 2x4 and 2x6 Lumber from 3” to 20’.

Tops, Bottoms, Webs, Sliders, Wedges and Scissor Bottoms. 230 Volt / 3 Phase 5 HP Motor with 24” Blade. Ink Jet Printer.

Scrap Conveyor. $36,900 NOW $30,000 FOB AR. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

www.woodtrusssystems.com

Wood Truss Systems

manufacturers’

Representatives

New Spida Automated Apollo Saw 1988 TimberMill 6-20 Component Saw • Six Blades cut 4x2 & 2x4 through 2x12 Lumber from 12” up to 20’-0” • Powered Angulation & Carriage • Chain Drag Waste & Incline Conveyor • 460 Volt / 3 Phase $12,900 FOB MD Wasserman & Associates 800-382-0329 www.wasserman-associates.com

The Spida Apollo saw with Automation is a computerized, pull-arm type saw used for cutting either wood truss components or wall panel cutting and represents the lowestcost way to add an automated single-blade saw to your operation. Features include angle cutting from 10 to 170 degrees, 36 inch scarf cuts, patented variable stroke limiter for safety, solid frame and arm design, 17 inch industrial touch screen with enclosure, 7.5 HP motor, plug and play wiring making installations easier and includes cowls for adding a dust extraction system.

$48,680 - FOB NZE/IN

765-751-9990

Read/Subscribe online at www.componentadvertiser.com

www.woodtrusssystems.com FAX: 800-524-4982

Automated Saws

Simple Stop

Plate Marking

1-866-647-7771

M ACdverti$er

Th e

omponent

anufacturing

November 1st, 2016 #09208 Page #15

Adverti$er

Don’t Forget!

You Saw it in the

Wood Truss Systems

SAWS

manufacturers’

Representatives

NEW! New Monet FWA 500 Floor Web Saw New, Monet five-head, floor truss web saw, cuts 4-angle, 4x2 floor truss webs from 16 inches and 90-90 blocks from 12 inches, to four foot long maximum length. Features 10-board magazine feed, powered, fixed-quadrant angulation, manual carriage standard, shaker-pan scrap conveyor with short incline conveyor and cut-off blade. Options available for longer carriage length, single-sided setup (shown in pictures, but not standard), dust hood and choice of shaker or belt scrap conveyor.

440 volt, 3 phase electrical. $49,000 Base Condition: New , Location: MO Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

NEW!

New Square 1 Rolsplicer New Square 1 Rolsplicer, splices 2"x3", 2"x4" and 2"x6" lumber with a 3 to 4 second cycle time. Presses the lumber together prior to imbedding plates. Embeds plate lengths up to 19 inches. Features two, recessed, simultaneous-activation buttons, guarded motor and sprockets, external lubrication points, 3 HP motor and a footprint of 59" long x 42" wide. Optional 20' infeed and 10' outfeed conveyor available. 480 volt, 3 phase electrical. Other voltages available. $17,409 FOB IN Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

DePauw Floor Web Saw Rebuilt by Monet DeSauw, Inc. in 2014 including: five Baldor blade motors, five blade hubs were resurfaced, new angle crank handles and rods, guards and sheet steel covers, hold down assemblies, including bars, chain, springs and bolts.

The saw was partially rewired with a new lumber counter. New legends and buttons were replaced where needed, new safety switches on bump bar and cut off guard, new scales and mounts, new drive line chains, shafts and bearings. Shaker waste conveyor had new paddles, sheaves and pulleys, repainted with new safety decals.

480v, 3 phase electrical.

Performance capabilities: • Angle range is from 12 degrees to 45 degrees, which means when one angle is 12, the other is 78 and when one is 45, the other is 45. So any angle combination equaling 90 degrees can be achieved in between that range.

• The max material length is 4 feet, 2x4 material only.

• All angles and length adjustments are hand crank.

• 90-90 blocks are NOT possible.

• estimated minimum 4-angle floor truss web: 14".

• The blades are 12" diameter, one set available with saw. Additional set must be custom ordered from blade supplier to match bolt pattern. $28,750 FOB MO Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

New Hundegger Turbo Saw $235,963 Nicely Equipped The Hundegger Turbo-Drive saw is a fast, accurate and versatile, fully automated linear saw specifically designed to cut structural component parts. Hundegger continues to stretch the cutting capabilities of our industry by providing a single saw with options that can perform basic drilling, milling and printing operations in addition to 5-axis cutting.

The Turbo-Drive's features and benefits include: up to 4-board lumber stacking, capable of cutting lumber, wood I-beams or engineered lumber, capable of cutting stair stringers, able to scarf or valley cut along the horizontal plane,option for two different types of millwork attachments: can mill recesses or profiles on single or stacked boards, options for inkjet, pen or label marking, option for bar coding, data transfer from design software to the saw, free software upgrades and the use of Board Stretcher technology: boards are cut faster with less blade movements and less waste.

765-751-9990

NEW!

www.woodtrusssystems.com

$48,600 FOB IN

Automated Apollo Saw with Truss Software Northfield Model 410 Upcut Saw Northfield model 410 upcut saw. Semiautomatic air actuated under table cutoff saw with 18 inch diameter blade, safety guard cowling for blade, 10 HP arbor motor.

Cuts from 2 x 14' to 4 x 10". Push button controls. 230/460 volt, 3 phase electrical. $4,890 FOB OH Wood Truss Systems 765-751-9990 www.woodtrusssystems.com PHONE: 800-289-5627

Speed Cut Saw with Hain Measuring System •Speed Cut Metra-Cut Saw (5 HP / 3 Phase) •20’ Hain Powered Measuring System •Cutting Depth of 6” with 16” Blade •Angular Capacity of 164 Degrees •Saw Barrier Guard •Turntable Air Brake $8,300 FOB IL Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Solid 48” x 72” Frame and Arm Construction Minimizes Flex on the Saw Frame. Direct Drive 7.5 HP Motor with 18” Blade (230/460 Volt). Minimum Angle of 10 Degrees with 36” Stroke for Long Scarf Cuts. Automated 160 Degree Angular Movement.

Variable Stroke Limiter & Plexiglass Shield for Operator Safety. MDF Profiled Saw Bench Top Provides a Safe Working Platform. Dust Extraction Outlet. 20’ of MDF Bench Top with Automated 20’ Length Stop & 10’ Gravity Conveyor. Workstation, Control Cabinet Enclosure & 17” Touch Screen Integration. Serial Control System.

Includes all Plug & Play Wiring. MangoTech/Spida Truss Cutting Software. Add $3,680 Two Day Onsite Installation & Training. Add $750 for 12 Month Phone & Virtual Tech Support. Add $275 for Spare Blade. Add $558 for Saw Laser Guide. Add $890 for Dust Collector

800-382-0329 | www.wasserman-associates.com

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

MORE THAN JUST A PRETTY FACE.

THE HUNDEGGER TURBO DRIVE SAW IS A FAST, ACCURATE AND VERSATILE, FULLY AUTOMATED LINEAR SAW SPECIFICALLY DESIGNED TO CUT STRUCTURAL COMPONENT PARTS.

Hundegger continues to stretch the cutting capabilities of our industry by providing a single saw with options that can perform basic drilling, milling and printing operations in addition to 4 -axis cutting.

Hardly another “pretty face”, the TURBO Drive is a solid evolution of the popular SC Series saws. This workhorse, like all of Hundegger’s production saws, benefits from their experience learned from a wide variety of wood cutting and milling applications from over 4,700 saws to date. Specific to our wood component industry, the TURBO Drive has been thoroughly developed for world-wide customers prior to its introduction to the US. Regardless of your cutting application, be it I-Joist, dimensional 2x lumber, or any variety of EWP, we have the experience and equipment to efficiently bring your job to market.

ÜÜÜ°7 `/ÀÕÃÃ-ÞÃÌi ðV ÊUÊÇÈx Çx£ ä

More than history, the TURBO Drive is German engineered to allow for maximum performance in a given application. With this base, precision performance is improved with software optimization rather than hardware changes.

This is apparent when the TURBO Drive was optimized for USA component cutting, the same world model saw runs significantly faster, simply by optimizing movements and stroke.

For a demonstration of how software upgrades accomplish this, see the “before & after” video at: https://youtu.be/3V5gmXbjQPU. It illustrates that software can increase throughput rather than redesigning elements of the equipment, your TURBO Drive does not become yesterday’s news because of a model number change.

FOR A DEMONSTRATION OF HOW SOFTWARE UPGRADES ACCOMPLISH THIS, SEE THE “BEFORE & AFTER” VIDEO AT: https://youtu.be/3V5gmXbjQPU

So how much would you pay for software that increases your cutting productivity and keeps your saw current with the latest technology?

How about zero? With the Hundegger TURBO Drive, free software updates for life are included with the saw. As software is optimized and performance is enhanced, you’ll never have to worry about what model you bought. For more information, visit http://www.woodtrusssystems.com/ manufacturers/general/hundegger-usa/

ÜÜÜ°7 `/ÀÕÃÃ-ÞÃÌi ðV ÊUÊÇÈx Çx£ ä

Contact us at: 1-866-647-7771

FEEL THE BUZZ! SPIDA’S UPCUT SAWS 18” & 24”

M ACdverti$er

Th e

omponent

anufacturing

November 1st, 2016 #09208 Page #19

Adverti$er

Don’t Forget!

You Saw it in the

Wood Truss Systems Wood Truss Systems

manufacturers’

Representatives

manufacturers’

Representatives

Wood Runner FastFrame Wall Panel Marking Saw

New Spida Automated Apollo Saw The Spida Apollo saw with Automation is a computerized, pull-arm type saw used for cutting either wood truss components or wall panel cutting and represents the lowestcost way to add an automated single-blade saw to your operation. Features include angle cutting from 10 to 170 degrees, 36 inch scarf cuts, patented variable stroke limiter for safety, solid frame and arm design, 17 inch industrial touch screen with enclosure, 7.5 HP motor, plug and play wiring making installations easier and includes cowls for adding a dust extraction system.

$48,680 FOB NZE/IN

Click Here for More information

765-751-9990

www.woodtrusssystems.com

Wood Truss Systems

manufacturers’

Representatives

The Wood Runner® FastFrame™ wall panel marking saw is the fastest, easiest way to cut and mark wall panel components. Feeds lumber up to 100" per second with a retraction rate up to 200" per second. Users report a 50% reduction in production time when compared with previous automated cutting and marking saws. Processing material from 2x4 through 2x15 is achieved with an aggressive 80 tooth,12" blade. The FastFrame cuts with a chop saw function for 2x4 material, then with guided "plunge" expansion for cutting material from 6", up to 15" in width. FastFrame marks boards with the next generation Matthews I-Mark V84i, DOD 8000+ MAXI inkjet for edge printing plate layout pattern (face printing available as an option). Base saw cuts 90º, the FastFrame also completes angled 45º cuts and compound cutting each optional. The FastFrame is as safe as it is fast with guard panels on the back of the saw, and a fully enclosed saw chamber. A true world class, state-of-the-art solution for wall panel component processing at an affordable price. Starting at $89,900 FOB MN.

765-751-9990

www.woodtrusssystems.com

To uncover what’s possible, abandon what’s comfortable!

Fitzzgerald Group, LLC “A blending of excellent services and products, with answers that work”©

NEW! New Monet DeRobo Linear Saw New, DeRobo linear saw by Monet organizes "fill" boards to increase optimization of each board, can produce unlimited scarf cuts, cuts 1 or 2 boards at a time and cuts webs, chords, wedges, rafters and open-stair stringers. Works with all major connector plate manufacturer's software. Features include 22 inch blade, left-to-right feed direction standard, lumber push and pull grippers for more accuracy, ink marking on the 1 1/2" face of the incoming boards and small piece capture and delivery to the front of the saw for easy access. Infeed deck and bunk feed are shown as options only. Works with the optional WoodRunner TM lumber retrieval system. 440 volt, 3phase. $169,000 Base Price, FOB MO.

765-751-9990 PHONE: 800-289-5627

www.woodtrusssystems.com

WoodRunner Conveyors Inc. Viking Walls MaxCustomCutter Wizzard PDS Drop-In Channels Gorbel Crane Technology Just a few or our profit enhancing parts that can make you whole!

630 Southpointe Court - #200 Colorado Springs, CO. 80906

Read/Subscribe online at www.componentadvertiser.com

719-528-5445 RFitzgerald@FitzGroup.com www.FitzGroup.com FAX: 800-524-4982

Internationally Trained Staff International Service

1-866-647-7771 Sales@Square1Design.com "Passionate About Our Work and Dedicated to Our Service"

M ACdverti$er

Th e

omponent

anufacturing

Adverti$er

Don’t Forget!

You Saw it in the

November 1st, 2016 #09208 Page #21

Wood Truss Systems

TRUSS EQUIPMENT

manufacturers’

Representatives

NEW! CMF 12' Roof Truss Gantry System 75​'x 12' side-eject system (90' OAL with dual park area) f​ eaturing: 11 soft-top wood/ plastic, 12'x72" tables with Uni-Strut puckrails, (11) skate-wheel ejectors to powered transfer roller. Includes two (2) CMF 12' x 24" dia. gantries, one 1988 and one 2005, both with top-side riding platforms, two button motion control,​ for continuous top use (no aisles). includes crane rail with base-plate and all available jigging hardware, ​208v, 3ph power , electrical supply rail, and air-manifold included.​ $40,900 FOB PA. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Mitek 40' Floor Truss Machine Build floor truss depths up to 24”, lengths up to 40’. Track Mounted Roller Gantry with Ride Platform. 230/460 Volt - 3 Phase - 10 HP Motor. Overhead Plate Rack. Dual Safety Bars. Air Cylinder Clamping. Stored outside for 2 years. $21,900 Now $20,900 NOW $19,900. FOB GA Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Klaisler 51' End Eject Roller Gantry System Klaisler 14’ x 24” Diameter Gantry Roller (track mounted) with Hydraulic Roll Lifter & Ride Platform. (10) 4’-8” x 14’-0” Steel & Plastic Top Tables with Pop-up Rollers (for end eject). (1) 4’-8” x 7’-0” Steel & Plastic Top Table. Floor Rail. 208 Volt / 3 Phase.

Excludes: Jig Hardware, Finish Roller & Outside Conveyor. $22,500 FOB MB. Wasserman & Associates 800-382-0329 www.wasserman-associates.com PHONE: 800-289-5627

12' Finish Roller Press Press was purchased used in 2006, painted and wired for service but never utilized.

An excellent press for smaller wood components including jacks and valley sets. 120V, 1 phase power. $6,490 FOB NY Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Vertical Truss Stacker by Square 1 Manufacturing

CMF Stealth End-Eject Tracked Roof Gantry System End-eject CMF Stealth tracked roof truss gantry system with 14’ by 56 foot working length. System features (8) eight slotted steel top tables with ejectors, (1) one 24” Stealth diameter gantry head, (1) one Stealth 24" finish roller press with 14 foot throat and (13) idler rollers. Includes all available electrical and jigging hardware. 440 volt, 3 phase electrical. $68,890 FOB QC Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Klaisler Finish Roller Press Klaisler finish roller press, 14 foot wide final roller with 18 inch diameter steel rolls, heavy-duty steel frame, continuous shaft supported by 4 baffles. Twin 5 HP drive motors (10 HP total), push-button controls with one safety bar, dual drive chains, idler gears and sprocket guards. Recent frame and electrical control repairs made in June of 2016. See video posted below. 240v, 3 phase electrical. $8,390 FOB NY Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

New, vertical stacker by Square 1 Design & Manufacture, up to six pedestals to handle up to 100 foot long spans. Features I-beam construction, holds from 10 to 25 trusses based on truss size, shape and weight, integrated drive tube for simultaneous stacking action and support during rotation, dual high-torque braking gear motors, adjustable tension clutch, heavy-gauge aluminum uprights with rubber bumper stops and automatic controls. The controls allow jogging the stacker both in forward and reverse directions and can be set up for multiple stacks of trusses. 440 volt, 3 phase electrical. Other voltages available. $31,067 BASE, FOB IN.

765-751-9990

www.woodtrusssystems.com

Wood Truss Systems

manufacturers’

Representatives

NEW!

Table Guided Gantry System by Square 1 Manufacturing New, table-guided (NO rail) gantry system by Square 1 Design & Manufacture, sideeject or end-eject options, with continuous production tables built to length. Available in steel, plastic or combination table top options. Can be fabricated to received automated jigging. 24" diameter gantry heads feature raised operator platform, heavy-duty steel roll with 4" shaft, baffles and heavy-duty spherical bearings, dual 7.5 HP braking gear motors for a total of 15 HP, easy adjusting bogie wheel assemblies, safety bars, Wampfler "finger safe", under-table-mounted electrical supply and optional soft start drive. Square 1 can provide the combination of powered transfer rolls, sloping ejectors, receivers, idler conveyors and powered conveyors required to meet your configuration needs. 440 volt, 3 phase electrical. Other voltages available. FOB IN.

765-751-9990 Read/Subscribe online at www.componentadvertiser.com

www.woodtrusssystems.com FAX: 800-524-4982

A-to-Z one roof

Carl Schoening article continued from page 16

the Eagle Metal advantage: every management solution, under

[ ] build it true every day SM

Manage your business your way by utilizing our comprehensive suite of products, services and solutions. It’s a strategic decision to make your production more effecient and your plant more profitable in the future.

This end-to-end approach simplifies your efforts and reduces your costs. So we’re able to bring your organization’s profitability to life with maximum results.

SM

It’s everything you need, in one place making the combination of the whole a complete integration that gives you the most bang for your buck.

Call us today for a free demo and how to put Eagle Metal’s solution suite to work for your business, your way.

CONNECTOR PLATES | ENGINEERING | DESIGN SOFTWARE | SUPPORT | EQUIPMENT EagleMetal.com

|

800-521-3245

|

12300 Ford Road, Suite 110, Dallas, Texas 75234

M ACdverti$er

Th e

omponent

anufacturing

November 1st, 2016 #09208 Page #23

Adverti$er

Don’t Forget!

You Saw it in the

Wood Truss Systems Wood Truss Systems

manufacturers’

Representatives

NEW!

manufacturers’

Representatives

NEW!

New Square 1 Short Roof Truss Finish Press

New Square 1 - 40’ Trackless Floor Truss Gantry

New, Square 1 “short” finish roller press (FRP), Four-foot wide (other widths available) x 1 1/2” tall throat. The unique “uni-body” construction creates a ridged machine that houses 12” diameter rolls, 7 1/2 HP motor with integrated brake, emergency photoelectric shut-off and 80# chain drive. This FRP features 114 FPM speed, emergency shut-off bars, and full chain and sprocket guards. Available options include: other roller widths, Heavy-Duty upgrade, gear motor drive, and soft start controls. 480 volt, 3 phase electrical.

Other voltages available. $15,750, FOB IN

New, table guided (NO rail) floor truss machine by Square 1 Design & Manufacture.

This well designed machine builds floor trusses up to a standard 26 inch depth (32 inch optional). Working length of 40 feet. Other features include side eject, flip jig for build side, pop-ups for back plate side. Clamping by under-table cylinders controlling above-table steel fence. Floor truss gantry features twin 7.5 HP gearmotors for a total of 15 HP, 24 inch diameter roll, safety bars, 3 7/16” diameter, full-roll-length shaft with baffles. 440 volt, 3 phase. Price includes installation supervision from the manufacturer.

Also take advantage of the Square 1 factory promotion offering a $5,000 savings on a Rolsplicer or Floor Truss Finish Roller (FTFR) with the purchase of a new SQ-Series floor system through April 15th, 2016. $99,412, FOB IN

765-751-9990

www.woodtrusssystems.com

765-751-9990

www.woodtrusssystems.com

Refurbished Systems Available! w/new 10’ rails & stops $3,790!

Call Leonard for current specials!

theHAINCOMPANY | 6125 Enterprise Drive, Unit 9 | Diamond Springs, CA 95619 | 530.295.8068 | sales@thehaincompany.com PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er

Th e

omponent

anufacturing

Adverti$er

Don’t Forget!

You Saw it in the

November 1st, 2016 #09208 Page #24

Todd Drummond Consulting, LLC.

Stop Wasting So Much Time Trying to Find Up to Date Project or Department Information Website: www.todd‐drummond.com – Phone (USA): 603‐763‐8857 E‐mail: todd@todd‐drummond.com Copyright © 2016

It is an all too common problem for too many managers and sales staff; hours are spent wasting so much time trying to find up-to-date information for any given project being processed by the company. Ask yourself one simple question. How much time each day do you spend looking for information about a project status or trying to gauge the productivity of any individual or group?

Below is a simple solution that can help your company stop wasting so much time and start using everyone’s time performing the tasks that make money for the company.

Schedules – Every department, such as production, delivery, or a group like the design team, should create a schedule that shows allocated resources for each area! Then in each department, have the department manager create a schedule for individual workstations and team members such as designers using allotted resources. Allocated resources simply means that the schedule shows how much time (man-hours, BF, pieces, or any unit) are being used versus what is available. Display the schedules in the cloud, so anyone with access rights can view them from anywhere. And because they are displayed on the web, it is live data, so any change is instantly shown. By sharing on the web, it saves a lot of time compared to waiting on e-mails or phone calls.

Create a milestone task checklist for all project processes. Every project has similar tasks that need to be completed in a step-by-step manner. Why not list the task milestones and then link them all, so they are each relying on the previous task as a dependency? For example, an order may not be able to proceed unless seals are obtained from the engineer. Therefore, seals may be a dependent task that is required to proceed to the next stage of design or production. And since you are creating the milestone process checklist, add in automated reminders so that the right people are notified when something is reaching a critical date. Another example of a common task that should have an auto reminder are change order sign-offs. Again, just as the schedules are displayed on the web, display this process task list for all projects in an easy-to-use checklist shared by everyone. That way everyone will be able to see the status or stage of any given project with a mouse click. Think about how much more informed department managers will be for their areas of responsibility.

All project information should be linked to each project. Let’s face some basic facts about project processing.

Normally even the smallest projects have a lot of information that is related to them so that everything is done as the customer has requested. And, of course, the more people who are involved, the easier it is for critical information to be lost or overlooked. Tie all the different information communications together for each project so that prints, e-mails, notes, change orders, truss and wall panel files, schedules, people, and task lists are all connected to each project. A lot less information gets lost or overlooked when all of the information is simplified and tied together like this. (“Pssst!” … Share this on the web to decrease employee information searching.)

Okay, at this point you may be saying to yourself this sounds like an easy-to-create shared database. Wrong! It is not an easy-to-create shared database no matter what your IT guru is telling you. Since when is your company an expert software development and communication company that you think this is something you should try to develop on your own? Let me help you here by telling you far too many small and large companies have wasted a lot of money trying to do it on their own. Some of the largest lumberyard and component companies have spent hundreds-of-thousand dollars and failed. So stop trying to reinvent the wheel and do what they and so many others have done. Contact David Beach at AppWright and use what thousands of users are using every day in our industry.

AppWright has been used since 2001, and there are too many features that I can list in this short article that you as a manager or salesperson will find invaluable.

TDC is the TOP RANKED Consulting Firm for the Components Industry: #1 in Total Recommended Consultation Services in the Truss and Wall Panel Industry #1 in Actual Consultations for Our Industry (90+) #1 in Testimonials of Past Clients in Our Industry (~ 1/3rd of all clients are willing to give us a public recommendation) #1 in Comprehensive and Refined Consulting Services with Proven Results PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Salespeople, Employees, Customers, Vendors & Subcontractors

Your Existing Order Forms

√

√

√ √

Access to Any Project Information Via Any Web Browser with User Rights Project's Files, E-mails, Notes, Schedules w/ Resource Allocations, Auto Reminders and So Much More!

Generate Invoices & Purchase Orders Connect and Keep Your Existing Accounting Software

Sales Enhancer All Project Data is Always at The Sales Staff's Fingertips Via Any Web Browser.

Ed DeBiasio, President United Lumber “...If you want something that can actually enhance the productivity of all your staff, including the sales team, I highly recommend AppWright.

Compared to the cost of new equipment, this has been a true bargain.”

Eric Harrison, President Accu-Span Truss Co “We have been using AppWright for 5 years and find it to be a valuable tool to schedule our jobs. It simplifies working out of multiple locations. The ability to customize the program to suit our needs has made it an important part of our business software.”

Phone: (904) 268-9230

TDC is a Sales Representative

sales@appwright.com

www.appwright.com

http://todd-drummond.com/appwright/

WHAT DOES THE RANGER RS DELIVER? YOUR LUMBER!

DO SUCTION CUPS SUCK? THE ANSWER: NOT ALWAYS

SCREWS VS. SUCTION CUPS ACER’’’S Patented Screw Pickup System was developed to overcome the shortcomings of suction cups.

ACER began testing suction cups for lumber pickup in 2008 when designing the original retrieval system.

Please see our website to see what we have learned when testing both types of lumber pickup.

SPEED

ACCURACY

VERSATILITY

RELIABILITY

QUALITY

SUPPORT

The RANGER RS delivers the correct lumber to your linear saw quickly, faster than your saw can process it.

Delivers the lumber your saw requests, without the need to worry about operator error.

Designed for a wide range of lumber types and up to 30 stations. Many physical layouts are available to fit your operation.

Field proven design based on over 5 years of operation in truss plants around the world.

World class engineering, high quality fabrication and components make the RANGER RS an outstanding value.

Technical support and all parts are readily available for the RANGER RS and the Wood Runner* retrieval systems.

RANGER RS - Delivering Unmatched Customer Satisfaction and Efficiency ACER INC. Visit our website to learn more: www.acerinc.com RANGER RS was formerly sold under the Wood Runner* name. RANGER RS is a trademark of ACER INC. The RANGER RS system is protected under U.S. patent # 8,960,244. Other patents are pending.

ACER INC is not affiliated with Apex Machine Works. Wood Runner* is a registered trademark of Apex Machine Works LLC.

M ACdverti$er

Th e

omponent

anufacturing

November 1st, 2016 #09208 Page #27

Adverti$er

Don’t Forget!

You Saw it in the

TRUSS EQUIPMENT

Do You Know Your Knots?

Marquis 14' x 24" Finish Roller Press Marquis Hydraulics brand finish roller press, 14 foot throat, 24" diameter rolls, 7.5 HP motor, grease fittings, push button controls with safety stop on panel box. 575 volt, 3 phase electrical. $9,990, FOB QC Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

I

n the photograph, the side grain is shown to provide understanding of what constitutes a knot defect when the truss member is cut perpendicular to this face. Each dark line of grain indicates an annual growth ring.

In the sections marked A, the face of a sawn member would not show any knots but may show a figured or disrupted grain on the face. In this area, no defect exists.

In section B, a knot would be visible, however, the knot would be considered a “live knot” or “solid knot.” This area the face of the lumber would be considered defect free.

H o w e v e r, i n s e c t i o n C , a visible knot with a dark circle around the knot would exist. These knots are called “dead knots” or “loose knots” and would require a reduction in tooth count in the knot area because the knot may not be capable of transferring load to the adjoining wood fiber.

1996 Alpine Mighty Mite 1996 Alpine Mighty Mite beam press, model 745, 27 foot long, 5 foot wide, 5 HP drive, 12 inch wide platen, plastic table top and twin lever-arm controls. 208 / 230 / 460 volt, 3 phase. $13,990 FOB PA. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

The way to remember this is:  In the photo, the center of the tree would be to the right with later growth rings to the left.  Limbs of the tree growing with the tree are generally tight or live knots. They do not count as a defect in the plated area.  Limbs of the tree where the tree grows around the limb are loose or dead knots. They do count as defects in the plated area!

PANEL CLIP TK7 C-CLAMP PRESSES 10 Ton C-Clamp Press. 110 Volt Motor & Pump. Includes Boom & Trolley. 4x2 Throat Excludes Overhead Beam & Jig Table.

Red TK7 = $5,500. Brown TK7 = $5,000.

FOB AR Wasserman & Associates 800-382-0329 www.wasserman-associates.com

PHONE: 800-289-5627

Knowing your knots will help you understand potential defects and thereby protect the quality of your final products.

Glenn Traylor Structural Building Components Industry Consultant http://www.linkedin.com/in/glenntraylor

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er

Th e

omponent

anufacturing

Adverti$er

Don’t Forget!

You Saw it in the

November 1st, 2016 #09208 Page #28

ACHIEVING YOUR PLAN TO MOVE AHEAD TAKES A PARTNER WHO’LL REALLY GET BEHIND IT.

We’ve been helping production facilities all over the world make their plans a reality for three decades now. And it’s a tradition we build on every day, with proven experience, vast industry contacts, and a penchant for creative, effective problem solving. If greater efficiency, productivity and profitability are part of your plan, we hope you’ll plan on talking with us.

www.WoodTrussSystems.com • 765-751-9990

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er

Th e

omponent

anufacturing

November 1st, 2016 #09208 Page #29

Adverti$er

Don’t Forget!

You Saw it in the

JobLine.com, inc.

The

TRUSS EQUIPMENT

800-289-JOBS

NEW!

IN OUR PAGES

Time To Hire?

We’re here when you need help! visit: www.thejobline.com

email: mail@thejobline.com STRICTLY CONFIDENTIAL!

IN OUR PAGES

MiTek Vertical Roof Truss Stacker MiTek Peak-Up, vertical truss stacker with 22 HP, heavy-duty drive system, autoindexing, spring assisted receiver arms, holds up to 30 trusses from 16 foot to 80 foot in length, up to 14 foot height, with 40 sec. average cycle time. Adjustable bridge/ arm starts cycling process, bundle indexes back 1 1/2" as each truss is stacked. Arms work as two sets of four adjacent arms or all eight arms at once. 230 volt, 3 phase electrical. Control panels are 115 volt, 1 phase electrical. Conveyors shown in pictures are not included. $42,990 FOB PA. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Square 1 Vertical Truss Stacker Engineered to operate through all seasons. Sumitomo High Torque Break Motor (no air or hydraulic unit to maintain). 35 Second Cycle Time. Each pedestal will hold from 10 to 25 trusses depending on truss size & weight. Floor Truss Stacker (stack 14’ to 50’ trusses). Roof Truss Stackers (stack 14’ to 50’ or 20’ to 70’ trusses). Agricultural & Large Residential Roof Truss Stacker (stack trusses up to 120’). Powered Outside Conveyor. Control Panel

800-382-0329 | www.wasserman-associates.com

Wood Truss Systems Wood Truss Systems

IN OUR PAGES

manufacturers’

Representatives

manufacturers’

Representatives

n ew

NEW!

Table Guided Gantry System

by Square 1 Manufacturing New, table-guided (NO rail) gantry system by Square 1 Manufacturing, side-eject or end-eject options, with continuous production tables built to length. Available in steel, plastic or combination table top options. Can be fabricated to received automated jigging. New 24" diameter gantry heads feature raised operator platform, heavy-duty steel roll with 4" shaft, baffles and heavy-duty spherical bearings, dual 7.5 HP braking gear motors for a total of 15 HP, easy adjusting bogie wheel assemblies, safety bars, Wampfler "finger safe", under-table-mounted electrical supply and optional soft start drive. Square 1 Manufacturing can provide the combination of powered transfer rolls, sloping ejectors, receivers, idler conveyors and powered conveyors required to meet your configuration needs. 440 volt, 3 phase.

Price: $(Based on required configuration) :: FOB IN.

Call for pricing (Based on configuration)

765-751-9990 PHONE: 800-289-5627

www.woodtrusssystems.com

Table Guided Gantry System by Square 1 Manufacturing New, table-guided (NO rail) gantry system by Square 1 Manufacturing, side-eject or end-eject options, with continuous production tables built to length. Available in steel, plastic or combination table top options. Can be fabricated to received automated jigging. New 24" diameter gantry heads feature raised operator platform, heavy-duty steel roll with 4" shaft, baffles and heavy-duty spherical bearings, dual 7.5 HP braking gear motors for a total of 15 HP, easy adjusting bogie wheel assemblies, safety bars, Wampfler "finger safe", under-table-mounted electrical supply and optional soft start drive. Square 1 Manufacturing can provide the combination of powered transfer rolls, sloping ejectors, receivers, idler conveyors and powered conveyors required to meet your configuration needs. 440 volt, 3 phase. FOB IN

765-751-9990

Read/Subscribe online at www.componentadvertiser.com

www.woodtrusssystems.com FAX: 800-524-4982

M ACdverti$er

Th e

omponent

anufacturing

November 1st, 2016 #09208 Page #30

Adverti$er

Don’t Forget!

You Saw it in the

TRUSS EQUIPMENT

Reconditioned machinery never looked so good.

Used & Reconditioned Machinery. Eide’s warranty on reconditioned equipment meets or exceeds the new machine warranty.

Look to Eide for your Machinery, Parts and Service needs.

New, state-of-the-art component manufacturing & material handling systems by the industry leading manufacturers.

Klaisler 14' x 80' Side Eject Roller Gantry System • •Klaisler 14’ x 24” Diameter Gantry Roller (Track Mounted) • •12 Each 6’ x 14’ Steel Framed Plastic Top Tables with Ejectors • •460 Volt / 3 Phase $52,500 FOB MD. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

1992 Clark Industries 14' Tri-Axis Press with Kick-Leg Table Model 4000 Gantry Press (14’) with Joystick Control, Ride Platform & Floor Track. 20 HP Hydraulic Pump Motor. 16” x 19” Pressing Platen. Kicklegs & End Stands for 12’ x 50’ Table. Combination Steel/Wood & Plastic Top with Jig Bars $28,000 FOB MI Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Alpine Tables with Rail Quantity of five (5) 6' x 14', Alpine tracked gantry tables with slotted steel bottom chords, HDPE plastic tops and (4) skate wheel ejectors. Includes 39' of 80 lb. crane-rail with base plate, and one air-valve control. $12,490 FOB SC. Wood Truss Systems 765-751-9990

Installation & Operator Training included or available with any equipment purchase.

Square 1 SQ-Series Floor Truss Machine (Table Guided)

Table Retrofit and upgrades for WizardPDS®.

• 24” Diameter x 3/4” Wall x 6’-6” Long Gantry Roller • 3 7/16” Diameter Continuous Shaft Supported by 3 Baffles • Dual 7.5 HP Sumitomo Cyclo 6000 Gear Motor • (4) Drive Wheels Run on Top of Table with (8) 3” Osborn Cam Followers Under Table • ”Soft Start” Inverter with Square 1 Easy ID Software • Flashing Motion Indicator Beacon Light • Front & Rear Emergency Shut Off Bar • Integral Mechanical Fail Safe Brake • 230/415/460/575 Volt - 3 Phase • 6’-6” Wide x 40’ Long Steel Table • 3/4” Steel Table Top • Clamping Rails & End Stops • Built-In 1/2” True Arc Camber to Both Clamping & Side Rails • Electrical Track & Air Cylinders are Under the Table • Build up to 40’ Floor Trusses with Option for Additional Length • Floor Truss Depths from 9” to 26” with Option for Additional Depth • Optional Pop-ups, Flip Jig (shown in photos) & End Eject (shown in photos)

Parts & Supplies. Our parts department stocks thousands of parts and supplies for most brands of cutting and pressing systems. Custom and obsolete parts fabrication is our specialty.

Service & Repair. Our service department offers complete repair, rebuilding & retro-fit services; in-house or on-site.

Check out our Used & Reconditioned Equipment Listings!

We know machinery.

Machinery ~ Supplies ~Since 1927~

Toll free 800-344-EIDE | www.eidemachinery.com 3219 North Second Street Minneapolis, MN 55411-0397

PHONE: 800-289-5627

NEW!

$86,162 FOB IN

800-382-0329 | www.wasserman-associates.com

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A-to-Z one roof the Eagle Metal advantage: every management solution, under

[ ] build it true every day SM

Manage your business your way by utilizing our comprehensive suite of products, services and solutions. It’s a strategic decision to make your production more effecient and your plant more profitable in the future.

This end-to-end approach simplifies your efforts and reduces your costs. So we’re able to bring your organization’s profitability to life with maximum results.

SM

It’s everything you need, in one place making the combination of the whole a complete integration that gives you the most bang for your buck.

Call us today for a free demo and how to put Eagle Metal’s solution suite to work for your business, your way.

CONNECTOR PLATES | ENGINEERING | DESIGN SOFTWARE | SUPPORT | EQUIPMENT EagleMetal.com

|

800-521-3245

|

12300 Ford Road, Suite 110, Dallas, Texas 75234

M ACdverti$er

Th e

omponent

anufacturing

Adverti$er

Don’t Forget!

You Saw it in the

Wood Truss Systems

manufacturers’

November 1st, 2016 #09208 Page #32 TRUSS EQUIPMENT

Representatives

NEW!

New Square 1 Short Roof Truss Finish Press Four-foot* wide x 3 1/2” tall throat. The unique “uni-body” construction creates a ridged machine that houses 12” diameter rolls, 7 1/2 HP motor with integrated brake, and 80# chain drive. This FRP features 114 FPM speed, emergency shut-off bars, and full chain and sprocket guards. Available options include: Other roller widths, Heavy-Duty upgrade, gear motor drive, and soft start controls available at an additional charge. 208, 240, 480 volt electrical. $15,750 FOB IN

765-751-9990

1996 Alpine 79 Foot Roof Truss Gantry System Alpine tracked roof truss gantry, 14' x 79' working length system includes (1) 14' x 24" diameter, model 720 gantry head with 7.5 HP motor, (11) 70" wide tables with steel bottom chord, drilled & tapped, plastic and strut above, (7) truss ejectors, (9) receiving arms, 12' conveyor rollers consisting of (8) powered roller conveyors, (26) idler roller conveyors, (1) 15'-6" x 20" diameter, model 705 finish roller press with 10 HP motor, all available aisle pads, jigging hardware, track, electrical S/O cord supply. 440V, 3 phase electrical. $62,990 FOB PA. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Refurbished 1997 CMF Tracked Gantry System 1997 side eject CMF tracked gantry system with 14’ by 93 ft. working length. Tables and finish roller press were refurbished in 2007. System features (13) plastic topped tables with slotted-steel bottom chords, (1) 24” CMF diameter gantry head, (1) CMF 24" finish roller press, (4) idler rollers, and all available receivers. 440 volt, 3 phase electrical. $43,890 NOW $22,990 :: FOB WA. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

www.woodtrusssystems.com

Reconditioned with warranty.

Reconditioned Robbins Super Torque Gantry for use with line retrofit with WizardPDS® ChannelS®.

Installed February, 2016.

Eide Machinery Sales offers complete reconditioning services for your truss manufacturing equipment – or as an option to our used equipment sales. Add years of service life to older, time-tested equipment. What’s more, Eide Reconditioned equipment features a warranty that meets or exceeds the original equipment manufacturer’s warranty – we are that confident.

Installation and Operator Training is included, or available, with any purchases from Eide.

Contact Eide Machinery today to reinvest in what’s been working for you.

We know machinery.

Machinery ~ Supplies ~Since 1927~ Toll free 800-344-EIDE | www.eidemachinery.com 3219 North Second Street Minneapolis, MN 55411-0397 PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er

Th e

omponent

anufacturing

Adverti$er

Don’t Forget!

You Saw it in the

November 1st, 2016 #09208 Page #34

Launching Keymark’s New Program: Softright

Keith Dietzen, CEO Keymark Enterprises, LLC

Part II: One Example of a Solution Provided By Softright

L

ast month, Part I of this series discussed the problem that our new program, Softright, is designed to fix.

We focused on the issues that business owners have with integrating all of their internal systems. In this article, I’d like to give an example of a customer who we were able to help.

The experiences of this customer might sound familiar to a lot of readers.

One of our customers had a robust quoting process. Their process included multiple steps beginning with a customer request to place an order. Different employees in the process created the quote from a standardized list of SKUs, applied unique pricing formulas for individual customers, performed quality checks, and eventually had a sign-off from upper managers. The process had been fine-tuned for their business and everyone in the chain understood their role. Bringing in off-the-shelf software would have required retraining and process changes they didn’t want. In addition, they controlled their pricing through a complicated set of spreadsheets, and they wanted centralized control of all pricing information, so they only needed to update pricing information in one place, and those changes would flow seamlessly through all of their systems including back end accounting, inventory control, and even shipping.

Our team spent a few weeks working closely with the client’s group. Once we learned how they thought about their business systems and understood their needs, we could adapt our implementation to fit their budget and requirements. We rolled out early versions for them to review and give feedback, usually every two weeks or so, which really helped us make sure they were getting exactly what they needed. Now that the product is up and running, we can respond to individual enhancement requests quite rapidly.

So right now you may be thinking about which aspects of this story sound like your business. Are you in a similar situation? Are you looking for ways to improve your internal systems? Would you like to have a conversation with us to see if we can help you too?

Our development process described in this example is repeatable and reliable, and it consistently results in valuable customized software solutions that help businesses become more effective. For more information about Keymark’s Softright team, contact me or Johnny Drozdek at sales@keymark.com or 303443-8033. We can help you define the problem and the solution.

Looking at the entire process from their point of view, we wanted to design an approach that addressed all of their concerns.

For this company, we created a web-based version of their quoting process which automates the process flow. Employees can easily see what’s on their plate each day. Managers have visibility into the status of any new quote and easy access to historical information.

The website uses a centralized and cloud-based database where they have complete control of their data.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

STREAMLINE YOUR PROCESS WITH SOFTRIGHT Softright is a software development company that has decades of experience managing small to medium size software development projects. Softright knows how to work with project owners to take a project from a high level wish to a fully developed software product that fulfills the requirements laid out in a detailed project description.

THE MANUFACTURING PROCESS SALES INFO SYSTEM

1 2 3 4

FORECASTING

SALES/OPERATIONS PLANNING

DEMAND MANAGEMENT

MATERIAL PLANNING

PROCUREMENT

MANUFACTURING EXECUTION

ORDER SETTLEMENT

Softright starts a project by meeting with the project owner and stakeholders to develop a high level wish into a detailed specification of final software product performance. Our product manager works with all project stakeholders to assure that the final product outline will satisfy all stakeholders’ needs.

Softright’s development team will then develop an estimate of time and cost for the software development project. The project will be broken down into a series of two week sprints or “mini projects”. This process assures the ability for the project owner to monitor progress toward project completion and evaluate product development.

After completion of software development projects, Softright will maintain a library of all completed projects. The team that developed a project will be knowledgeable of the software behind that project and will be available to maintain that software and to make enhancements when the project owner desires to do so. The same process will be followed that was used to execute on the initial project.

The bottom line for the project owner, our customer, is that they pay for the project they want completed on a project basis, and can then get desired enhancements from time to time on a project basis, without incurring the expensive overhead of sustaining a software development department.

KEYMARK - SOFTRIGHT PO Box 20627 Boulder, CO 80308 303.443.8033 sales@keymark.com

M ACdverti$er

Th e

omponent

anufacturing

Adverti$er

Don’t Forget!

You Saw it in the

Wood Truss Systems

manufacturers’

Representatives

NEW! CLICK HERE for more information New Panels Plus Wall Panel Framing Equipment

Consider Panels Plus wall panel assembly equipment for manufacturers of wood or steel wall panels, floor-panels, and related framing components. Panels Plus is an employee owned, ISO certified, manufacturing company that builds state-of-the-art equipment featuring durable construction, with fit and finish second to none in the structural building component industry. The referenced base framing table allows you to assemble from 7-12 foot wall heights, at industry standard 16 foot lengths, at a working height of 29 to 32 inches.

This framer design includes controls at each end of table, squaring stops and pneumatic clamping for consistent wall panel quality.

Frames 2x4 or 2 x 6 walls, with color-coded, steel stud locators at 16 and 24 inches O.C. spacing. Includes pop-up skate wheels for easy transfer of completed wall frame. Framing table can be configured to receive wall framing light bars, other options include custom buildable wall heights, lengths and auto-indexing of optional 2 or 3 tool carriages.

Additionally from Panels Plus are sheathing tables with features that include foot pedal control at squaring end of table, with squaring stops, roller conveyors at both sides, single pendant controls for bridge, tool spacing at 6 inch centers with 3 inch bridge shift for offset nailing. Tool bridges can accommodate from 2 x 4 to 2 x 8 walls, with seam tilt being standard equipment Panels Plus Tool Bridges are available with single beam or dual beam design for two different tool mounts on one bridge.

Squaring stations, sub-component tables, conveyors and panel lifts are also available to complete the configuration of the wall panel assembly line. Price includes factory installation and training. 50 CFM at 120 psi air. 120 or 230 volt, 1 phase electrical.

765-751-9990

November 1st, 2016 #09208 Page #36

www.woodtrusssystems.com Wall Panel Equipment

Do You Have Thousands of Dollars in Off-Line Obsolete and Unused Equipment and Parts!

Sell It! in the

A

Th e

Component Manufacturing dverti$er

Serving the Structural Building Components Industry

2009 Panels Plus 16’ x 12’ Sheathing Table Single Beam - Model PP51000. Sheathing table squares and sheaths exterior 2x4 and 2x6 walls up to 16 foot long x 12 foot high (6’11 to 12’4”). Table features Foot Pedal power control at squaring end of table, 12” wide roller conveyor at both sides, Squaring stops, Single pendant control of bridge, Power Drive with Auto Return.

Single beam, multi-tool bridge features 24 primary tools at 6’ o.c. and top and bottom plate stitcher tools. Tool spacing on 6” centers with 3” bridge shift to accommodate offset nailing at sheathing seams. Standard 3 position tilt for seam nailing, hand-crank on tool bridge for precise stapling/nailing, laser sight line, and remote fire with offset shift function. Requires 60 CFM at 120 psi, 120v single phase electrical service. $48,900 FOB MN. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com Read/Subscribe online at www.componentadvertiser.com

Call 800-289-5627 x3

NEW!

New Component Table with Skatewheel Conveyors

• Lift & Extend Skatewheel Conveyors • 10’ x 10’ Work Area with Squaring Lip • Gun Holster & Nail Tray

$8,250 FOB NE

800-382-0329 | www.wasserman-associates.com PHONE: 800-289-5627

FAX: 800-524-4982

M ACdverti$er

Th e

omponent

anufacturing

PHONE: 800-289-5627

Adverti$er

Don’t Forget!

You Saw it in the

Read/Subscribe online at www.componentadvertiser.com

November 1st, 2016 #09208 Page #37

FAX: 800-524-4982

M m ACdverti$er

Th e

omponent

anufacturing anufaCturing

Adverti$er

Don’t Forget!

You Saw it in the

November 1st, 2015 2016 #09208 #08196 Page #38 #24

New Productivit Wall Panel Manufac PHONE: 800-289-5627 PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982 FAX: 800-524-4982

M m ACdverti$er

Th e

omponent

anufacturing anufaCturing

You Saw it in the

• • • • • • • • • • •

PHONE: 800-289-5627 PHONE: 800-289-5627

Adverti$er

Don’t Forget!

•

ty in cturing

November 1st, 2015 2016 #09208 #08196 Page #39 #25

FEATURES One Tool System (Change from Staples to Nails in Minutes) Programmable Fastener Patterns wit PLC Touch Pad Entry Accommodates 2”x4” and 2”x6” Walls Straight Line Stitching Away and Towards You Bridge Tilt at Sheathing Seams to Eliminate “Shiners” Adjustable Bridge Speed for Accurate Alignment Auto Return to Park Section on Tool Bridge Laser Pointer for Identifying Fastener Placement Powered Height Adjustment (8’ to 12’ Wall Height) Pop-up Skate Conveyor Cantilever Table Which Allows Floor to be Free of Obstacles Optional Stud Locators

$69,900 $67,500

Installation Support Available in the US & Canada

See More On-Line at

www.wasserman-associates.com Ph: 800-382-0329

Fax: 402-761-2422

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982 FAX: 800-524-4982

M ACdverti$er

Th e

omponent

anufacturing

Adverti$er

Don’t Forget!

You Saw it in the

November 1st, 2016 #09208 Page #41

WALL PANEL EQUIPMENT

1999 Triad Custom 2-Station Wall Panel Equipment Special built, 1999 Triad combo framing table with Gen II sheathing table, 20tool nailing bridge, router bridge and all available floor grating. Builds walls from 4'-0" to 14'-2". Includes pop-up conveyors, 16" & 24" stud locators. Sheathing bridge includes side-shift feature, push-button controls, manual bridge travel. Router bridge includes router. No tool dollies, fastener tools or tool mounts included. OEM parts are available at additional cost. 120 volt, 1 phase electrical. 100 PSI air required.

Price: $34,990 Location: IL Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

DeWalt Panel Saw Vertical panel saw, 10 foot long, utilizes 13 amp 120v industrial saw motor, DeWalt circular saw with 8" blade, crosscuts material up to 64" wide and 1 1/2” thick.

Included PDF service manual. $2,100 FOB QC Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

IBS Router Bridge IBS router bridge, for use with wall heights up to 12'-3". Includes single-tool router station, laser locator and single-tool nail/ staple station. Hand crank horizontal and vertical movements. Automated up/down and on/off options. 120 volt, 1 phase electrical. Tools/mounts shown are not included. $9,990 FOB IN Wood Truss Systems 765-751-9990 www.woodtrusssystems.com PHONE: 800-289-5627

1998 Triad 10' x 16' Econ-O-Framer w/ HBR & WPL Powered Width Adjustment from 6’-9” to 10’-3” Air Activated Pop-Up Rollers 20’ Roller Conveyor with Stands Excludes Tool Dollies and Nail Guns 2014 Panels Plus Handle Bar Router 2014 Panels Plus Wall Panel Lift. $8,900 FOB MN Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Triad 3-Station Wall Panel Line Used Triad equipment includes (1) model DQ Framer with stud locators at 16" and 24", tool dollies and skate wheel lift-outs, (1) DQ Squaring table and router bridge with auto-return, 10'-3" wall height x 16' panel length, (1) Gen II model SQ squaring table with single-beam, multi-tool bridge with auto return and laser pointer, stitch function, manual travel control, (19) mounts and (19) Bostitch staple tools. Squaring and sheathing tables are installed in-line to allow for longer panels. System includes Triad panel lift, electric hoist and (1) Gen II SH sheathing table (shown outdoors, in poor condition).

120 volt, 1 phase electrical. 100 PSI air. $65,290 $52,990 Condition: Good FOB: TN Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

NEW PortaFramer 16' x 7'-9" to 10'-6" Trailer Mounted Wall Framer 2" Ball Coupler. Safety Chains with Hooks. 2,000 Lb Jack with Wheel. Wheel Fenders. 12" White Spoke Wheels. Primed & Painted White. Galvanized Platform Stands. Galvanized Rollers & Cross Members. Stainless Steel Guide Pins on 16" Centers. Stainless Steel Air Cylinders.

Stainless Steel Push-In Air Line Fittings.

Water Separator & Regulator with Gauge. $15,000 FOB MO. Wasserman & Associates 800-382-0329

WALL PANELS MADE EASY

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er

Th e

omponent

anufacturing

November 1st, 2016 #09208 Page #42

Adverti$er

Don’t Forget!

You Saw it in the

TRUCKS & TRAILERS

1990 Ford F800 Truck with 1982 Barns Truss Trailer

“Serving the Component Industry Since 1996”

Now offering short term Working Capital Loans

Start smarter...

Grow faster...

Achieve more...

Keep More of Your CASH Eliminate Yearly Financial Reporting

Low Fees Fixed Payment Programs No Additional Collateral

2001 Sterling L9500 with Rand Rolloff Bed 2001 Sterling model L9500 straight body truck with Rand 26 foot long, 96 inch wide roller bed, 310 HP Cummings engine, Eaton Fuller 10-speed transmission, 33,000 GVWR, single rear axle, 200,000 miles.

Roller bed tilts with controls (gravity offload) located in truck cab and includes pop-up rollers, headache rack and ships up to 36' long trusses. Two front tires are new.

Half tread on the balance of tires. Half tread on brakes. DOT expired in March of 2015. $38,990 FOB CT. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

cvillella@acceptlease.com | www.acceptlease.com 894 Beaver Grade Road, Suite #304 - Moon Township, PA. 15108 Phone: 412-262-3225 Fax: 412-262-1154 TRUCKS & TRAILERS 1997 Road Boss 48’ Gooseneck Trailer Triple Axle Trailer. $7,250 FOB NV Wasserman & Associates 800-382-0329 www.wasserman-associates.com 1996 ASI 48'-70' Stretch Roll-Off Trailer •Sliding Tandems •Hydraulic Neck •Tires are good •DOT is current $22,000 NOW $17,500 FOB IA. Wasserman & Associates 800-382-0329 www.wassermanassociates.com

2000 Prentice Telestik-33 Material Handler 32’-10” Boom. 4,000 Lb Payload. Excludes Truck. $10,000 FOB GA. NOW $5,000 Wasserman & Associates 800-382-0329 PHONE: 800-289-5627

2016 Precision Equipment Roll-Off Trailers 40', 48' and 53' Fixed Lengths. 36' to 51', 42' to 60', 46' to 64', 50' to 70' and 53' to 80' Expandable Lengths. 102" Wide. Air Lift ICC Bumper. Self Contained Hydraulic Power Unit. Spring Loaded Composite Fenders. Dual Rear Rollers. New Low Pro Tires. Air Operated Roller Pin Lock System.

Air Operated Load Control System. Sliding Air Ride Suspension. Strobe Lighting. Mesh Between All Rollers. Patented Load Lifts.

LED Lighting System. Extend-a-Rail. 4" x 35' Load Straps. Patented Strap Locks.

Strap Winches. Dove Tail on Rear of Trailer.

Hydraulic King Pin Plate. Removable Headache Rack. 7 Way Receptacle on Rear of Trailer. Split Rollers. Sliding Winch System. Aluminum Tool Box. Trailer is Sandblasted & Primed with PPG Polyurethane Paint Wasserman & Associates 800-382-0329 www.wasserman-associates.com

1990 Wabash 47-70 Foot Stretch Roll Off Trailer 1990 Wabash model SE, 47 to 70 foot stretch roll-off trailer, fixed tandem axles, fifth-wheel tractor connection, sloping bed/ gravity offload, locking rollers with brake control, ABS brakes, current Indiana DOT inspection (March 2016), 1/2" to 3/4" deep tire tread. $18,990 FOB IN. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Read/Subscribe online at www.componentadvertiser.com

•Low Mileage Unit in Good Condition FANTASTIC DEAL! $9,900 FOB CA Wasserman & Associates 800-382-0329 www.wassermanassociates.com

1994 Dorsey 48’ Flatbed Trailer •48’ Long x 102” Wide •Tandem Axle •Steel Wheels •Headache Rack •Winches & Straps •2 Trailers Available $7,500 FOB IL Wasserman & Associates 800-382-0329 www.wasserman-associates.com

• • • • • •

2000 Haulin' T-30 Rolloff Trailer Condition: As-Is, Where-Is 2000 Haulin' rolloff truss trailer, 48 foot long, sliding tandem axles, fifth wheel tractor connection, hydraulic lift, locking rollers, lights in working order, 70% tire tread and 60% brakes. $11,990 FOB MN Wood Truss Systems 765-751-9990 www.woodtrusssystems.com FAX: 800-524-4982

M ACdverti$er

Th e

omponent

anufacturing

November 1st, 2016 #09208 Page #43

Adverti$er

Don’t Forget!

You Saw it in the

TRUCKS & TRAILERS

MISC.

JobLine.com, inc.

The

800-289-JOBS 2004 Hot Shot 43' Roll-Off Trailer Hydraulic Raised Roller Bed. GVWR: 24,000 Lbs. Tandem Axle. Tires: 23516. Electric Brakes. Headache Rack.

Manufactured by R & R Truck & Trailer (7-26-04). $9,500 NOW $8,500 FOB IL. Wasserman & Associates 800-382-0329 www.wassermanassociates.com MISC.

Truss Designers & Panel Designers Available NOW! Screened, Tested,

Guaranteed! www.thejobline.com

Associated Machinery Material Carts Solid Hardwood Construction. (2) 10” Center Wheels. (2) 5” Swivel Casters.

Phenolic Wheels. Cast Aluminum Axle & Corner Brackets. Capacity: 2,500 Lbs. $420.00 Each (32” x 60”), $500.00 Each (36” x 60”), $30.00 per Set of (4) 36” Standards, FOB NC. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Monet DeSauw 20' Live Deck •Model PD-5 Power Deck •Heavy Duty 5 Chain Lumber Feed System •16’ Wide x 20’ Long x 36” High •Foot Pedal Control $7,900 FOB GA Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Tee-Lok Lumber Stacker $6,500 FOB MB Canada.

Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Alpine Hydraulic Chord Splicer Used Alpine hydraulic chord splicer with fluid reservoir, dual-button controls and lumber hold downs. From OEM literature, "...positive locators secure plates while positioning lumber, handles 2" x 4" and 2" x 6" lumber, air clamping for uniform joints, platen size 6" x 12.5", 4" diameter cylinder with pressing force of 31,415 lbs at 2,500 PSI". Weight 1,200 lbs. Table size 29" x 33" x 37.25" tall. 208/240/480 volt, 3 phase electrical possible, currently 240 volt, 3 phase. $2,990 NOW 1,990 FOB IN Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

theHAINCOMPANY | 6125 Enterprise Drive, Unit 9 | Diamond Springs, CA 95619 | 530.295.8068 | sales@thehaincompany.com PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er

Th e

omponent

anufacturing

November 1st, 2016 #09208 Page #44

Adverti$er

Don’t Forget!

You Saw it in the

MISC.

IBS Sub-Component Nailing Station Produces corners, tees, beam pockets, L's, triples, doubles and jacks. Maximum lumber depth is 2x12". From the manufacturer's literature, "Clamping force of 700 lbs. vertical and 2,000 lbs. horizontal...End squaring stop raises to ensure a flush start and retracts automatically after the first fastener is fired. Nail angles can be adjusted for best results. The controllable staggered nail pattern limits wood splitting...". Tools, mounts and conveyor are not included.

Air actuated (analog) controls. 120 volt, 1 phase electrical. 100 PSI air required. $7,990 FOB IN. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Ruvo 2200 Stair Saw Ruvo model 2200 machine capable of box stringers only and cuts two stringers at a time. The saw comes with a year warranty; 90/08 remanufacture including new cylinders, valves, tubing, fittings and electrical. Spindle motors are either new or rebuilt. The machine has been recalibrated, all known problems fixed, motor bench tested, machine cycled and video of cutting stringer can be supplied. Installation by the OEM is available at an additional charge.

Wired for 230 volt, 3 phase and 30 amp electrical service. $22,677, FOB FL | AS NEW. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Invicta DGI-40 16" Single Surface Planer (Used) •15 3/4” x 8 1/2” Capacity •25 & 46 FPM Feed Speeds •5,000 RPM Cutterhead Speed •7 1/2 HP Motor •230 Volt / 3 Phase •Powered Raise & Lower of Table $4,000 FOB WA Wasserman & Associates 800-382-0329 www.wassermanassociates.com

NEW!

Square 1 RolSpicer Chord Splicing System

Splices 2x3, 2x4 & 2x6 Lumber. 3 to 4 Second Cycle Time. 2 Recessed Simultaneous Activation Buttons. Guarded Motor & Sprockets. Greaseless, Maintenance Free Shaft Bearings. Compact Design (59” Long x 42” Wide x 44” High). Positive Press Tight Abutment. Hand Wheel Lumber Adjustment. 3 HP Sumitomo Gear Motor. Add $1,425 for 20’ Infeed & 10’ Outfeed Roller Conveyor with Stands.

$17,409, FOB IN. 800-382-0329 | www.wasserman-associates.com PHONE: 800-289-5627

New Square 1 Rolsplicer New 2014 Square 1 Rolsplicer splices 2"x3", 2"x4" and 2"x6" lumber with a 3-4 second cycle time. Presses the lumber together prior to imbedding plates. Features two, recessed, simultaneous-activation buttons, guarded motor and sprockets, external lubrication points, 3 HP motor and a footprint of 59" long x 42" wide. Optional 20' infeed and 10' outfeed conveyor available. 240 or 480 volt electrical. $15,500. FOB IN Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Hain 20' Powered Measuring System Adapts to Any Saw. Left or Right Hand Operation. Feet & Inches System (Stops at 12” Centers) or Inches System (Stops at 10” Centers). Motor: 1/4 HP Linear Actuator (110 Volt). Stop Rail: 2 x 4 x 1/4” Aluminum Extrusion. Stops: Jig Bored Steel. Stop Blocks: Machine Billet Aluminum. Optional Lengths from 5’ to 60’. Optional Gang Stop.

Add $770.00 per 10’ Section of Heavy Duty Roller Conveyor with Stands Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Read/Subscribe online at www.componentadvertiser.com

Cullen Model A40-2 Generator Set Detroit 12V-92 Engine.Capacity: 400 KW Capacity.Output: 120/208 Volt - 1388 Amps - 3 Phase..Control Panel..Skid Mounted..1,200 Hours. 30,000 FOB BC. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2010 Monet DeSauw Wood Finger Jointing Line Cut-Off/Shaper Unit with 5 HP Saw to Cut-Off Angles & 25 HP Cutter Head to Fingerjoint Ends. Delta 2 Bag Dust Collector. Glue Station with Apquip Glue Applicator & 6 Gallon Glue Pot. Hydraulic Finger Joint Press with Cut-Off Blades (2x4 and 2x6 Lumber). 480 Volt / 3 Phase. Save $$ on Disposal Fees, Earn Profit on Waste Material & Produce Straight Lumber. $58,900 NOW $49,500 FOB IL Wasserman & Associates 800-382-0329 www.wassermanassociates.com

2010 USIFAB Roof Truss Vertical/Flat Stacker 90 foot long, 3-station single/dual/tandem, peak-up, hydraulic powered roof truss stacker with electrical control panel and remote control for operator use. System includes 90 feet of conveyor capable of travel speed up to 140 feet / minute. Nine (9) arms rotate to 90 degrees for Peak-Up stacking, plus lateral transfer on opposite side for flat stacking. 15 GPM hydraulic unit with 15 HP electric motor. Professionally manufactured by USIFAB R. L. Inc. (www. usifabrl.com). Currently wired for 600 V, 3 phase electrical power. $63,980 FOB BC. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

M ACdverti$er

Th e

omponent

anufacturing

Serving the Structural Building Components Industry FAX: 800-524-4982

Toll Free 800-382-0329

www.wasserman-associates.com

WizardPDS®

drop-in Channels™ Old technology turned state-of-the-art with WizardPDS® drop-in Channels™ Your table + our technology = Zero Set up time and NO manual jigging.

Retro fit now - own it in 6 months!

M ACdverti$er

Th e

omponent

anufacturing

November 1st, 2016 #09208 Page #46

Adverti$er

Don’t Forget!

You Saw it in the

MISC.

NEW!

2011 Todd Saw Notch & Drill System

2004 Weima - Lenze Wood Processing System Weima model WL4S shredder, 30 HP drive with gearbox and limit switch, 10" diameter single-shaft with 1/2" grid screen, 23" x 41" hopper opening, PLC controls and 0.74 cubic yard hopper volume. A two-step wood processing process. Wood waste goes from the incline into the Weima grinder, to the short auger piece, then the 20' long auger at an incline, leading to the Lenze grinder.

Includes $1,000 worth of replacement knives and other available spare parts.

25,000 operating hours logged. Picture of output shown with listing. 230 volt, 3 phase, 100 Amp electrical. $37,990 FOB WI Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

A

$75,500 FOB CO.

Th e

Component Manufacturing dverti$er

New SL Laser Projection System New, laser projection system from SL Laser.

Projects roof truss, floor truss and wall panel design images accurately onto building surface, for faster setup and fabrication times. Each laser head provides 21' projection length (@15 foot ceiling heights).

Includes system computer, cables, mounting hardware for attachment to customer's structure, factory installation, training and choice of green or red laser. Works with each connector plate manufacturer's design software. Modular nature of the laser heads allows for easy, future expansion of system length. 120 volt, 1 phase. FOB NC Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Serving the Structural Building Components Industry

800-382-0329 | www.wasserman-associates.com

theHAINCOMPANY | 6125 Enterprise Drive, Unit 1 & 2 | Diamond Springs, CA 95619 | 530.295.8068 | sales@haincompany.com PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Introducing the RANGER RS by ACER INC.

We Deliver.

NEW NAME – SAME INNOVATIVE AND RUGGED RETRIEVAL SYSTEM The RANGER RS is the lumber Retrieval System developed and manufactured by ACER INC. in Rochester, Minnesota and sold worldwide for the past 5 years. With over 40 systems currently in the field and tens of thousands of production hours in truss plants, the RANGER RS has proven its value and reliability to our customers. This amazing system accurately feeds a wide range of lumber as fast as your saw can accept it, effectively setting the pace of production.

Easy to operate and simple to maintain, the RANGER RS will increase your production and save you money. Configure your system to fit your operation, up to 16 full size lumber stations plus added magazine stations give you the flexibility to store lumber and feed your saws for maximum throughput.

ACER INC. has been designing and building equipment for the truss industry for 18 years and has hundreds of machines in plants around the world.

Please visit our website:

www.acerinc.com

RANGER RS was formerly sold under the “Wood Runner” name. RANGER RS is a trademark of ACER INC. “Wood Runner” is a registered trademark of Apex Machine Works LLC. ACER INC is not affiliated with Apex Machine Works. The RANGER RS system is protected under U.S. patent # 8,960,244. Other patents are pending.

M ACdverti$er

Th e

omponent

anufacturing

November 1st, 2016 #09208 Page #48

Adverti$er

Don’t Forget!

You Saw it in the

MISC.

“Serving the Component Industry Since 1996”

Alpine Lumber Carousel Alpine model 407A, lumber carousel features (7) lumber bays each with 14 ft. max lumber lumber length (without overhanging the bay). Hydraulic drive with reservoir, 40' working diameter. 480v, 3 phase, 30A electrical. See video link and PDF shown with this listing. $9,690 FOB CA. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Now offering short term Working Capital Loans

Start smarter...

Grow faster...

Achieve more...

Keep More of Your CASH Eliminate Yearly Financial Reporting

Low Fees Fixed Payment Programs No Additional Collateral

cvillella@acceptlease.com | www.acceptlease.com 894 Beaver Grade Road, Suite #304 - Moon Township, PA. 15108 Phone: 412-262-3225 Fax: 412-262-1154

Wood Truss Systems

manufacturers’

2003 Challenger Wood Grinder Model CH200-3037-S. Vibrating Infeed Conveyor. Oufeed Material Blower. Motor: 27 KW Brook Hansen (480 Volt / 3 Phase).

Cutters: Small FIXCUT @ 58. Screen: 1/2” @ 2 Sections. NOW $17,500 FOB IL. Wasserman & Associates 800-382-0329 www.wassermanassociates.com

Representatives

UsiFab Chord Splicer UsiFab chord splicer splices 2"x3" through 2"x6" lumber. Presses the lumber together prior to imbedding plates. Imbeds plate lengths up to 13 inches. Features heavy-duty tubular frame, dual-recessed, simultaneousactivation buttons, guarded motor, sprockets and a 3 HP motor. 600 volt, 3 phase electrical. Price: $8,990, Condition: Good, Location: QC. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Metriguard Finger Jointing Testing Equipment •Metriguard Model 330 Press. •Humboldt Model H-30140 Laboratory Oven (115 Volt).

•Pressure Pump & Vessel. •Lightly Used.

•Excludes Associated Machinery Material Cart. $6,500 FOB NE Wasserman & Associates 800-382-0329 www.wasserman-associates.com Door & Stair

Alpine Lumber Carousel - NC HD carousel feed system with 7 stations, handles material to 16’. Includes toggle controls and 10 HP motor to power systems hydraulic power unit. $9,680 FOB NC. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Wood Runner AirPick The next generation Wood Runner® AirPick™ is a giant step forward in automated lumber retrieval systems and is up to 30% faster than the old screw-driven system.

The old style lumber retrieval system used screws to pick up lumber, but the AirPick has found a new faster, better way with suction. As a totally automated system, the AirPick eliminates the costs and limitations associated with manually fed saws. The AirPick is incredibly safe, with active monitoring of the work area, the gantry can slow or completely stop itself to avoid people wandering into the work area. This proven technology brings a new level of versatility, efficiency and accuracy to picking and feeding lumber to saws like Omni Miser, Alpine's ALS, Hundegger TURBO, Monet DeRobo, and other linear saws. Feel free to watch our videos and click on any photo to see additional shots in our gallery. For more information regarding this new innovative machine, get back to us by phone or e-mail! From $124,900 FOB MN.

765-751-9990 PHONE: 800-289-5627

www.woodtrusssystems.com

Four Arm Infeed Deck Price: $7,890 NOW $3,990 :: FOB PA 10' long x 10' wide 4-arm infeed deck, powered by a 1 HP motor, prism chain feed and deflector pans. 230/460 volt, 3 phase.

Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Read/Subscribe online at www.componentadvertiser.com

Norfield Magnum Door & Jamb Machine •Door Sizing/Beveling •Lock & Latch Drilling •Hinge Butt Routing in the Door & Jamb •Faceplate Routing up to 1 1/8” x 2 3/4” •Air Predrill & Air Screwdriver •Width: Doors to 4-0, Jambs to 10 1/2” •Height: Doors to 8-0, Jambs to 8-0 •Thickness: Doors to 1 3/4”, Jambs to 1 1/8” •Butt Sizes to 5” x 5” •Butt Spacing: Infinitely Variable •Lock Backsets from 2 3/8” to 5” •230 Volt / 3 Phase $8,000 FOB WA Wasserman & Associates 800-382-0329 www.wasserman-associates.com

FAX: 800-524-4982

M ACdverti$er

Th e

omponent

anufacturing

Adverti$er

Don’t Forget!

You Saw it in the

November 1st, 2016 #09208 Page #49

Door & Stair

NEW! 2002 Builders Automation Template Stair Router Model RUWO 2000 MFSR. Cut Box and Open Stringers. Manual Setup with Auto Feed and Cut. One or Two Stringers per Cycle. 10’ Infeed and 10’ Outfeed Roller.

Conveyor with Stands. 240 Volt / 3 Phase. $15,000 FOB NE. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Dotul Door Stop Stitcher Click Here for details $4,900 FOB GA Wasserman & Associates 800-382-0329 www.wasserman-associates.com

RUVO Model 925 Door Machining Center Interior & Exterior Door Machine will automatically: bore for the main lock hole. bore for the latch hole. rout for the rectangular latch plate. bore for the strike hole. rout for the rectangular strike plate. mortise for two or three hinges in both door & hinge jamb. Specifications: Door Height: 6’-6” to 8’-0”. Door Width: 1’-4” to 4’-0”.

Door Thickness: 1 3/8” or 1 3/4”. Butt Sizes: 3 1/2”, 4” or 4 1/2”. Jamb Width: 2 1/2” or 10 1/2”.

Wasserman & Associates 800-382-0329 www.wasserman-associates.com

To uncover what’s possible,

Builders Automation Stair Stringer Router Watch video here: http://goo.gl/gSRwjd More information here: http://goo.gl/mSsxyY 800-382-0329 | www.wasserman-associates.com

Wood Truss Systems

manufacturers’

Representatives

abandon what’s comfortable!

Fitzzgerald Group, LLC “A blending of excellent services and products, with answers that work”©

WoodRunner Conveyors Inc. Viking Walls MaxCustomCutter Wizzard PDS Drop-In Channels Gorbel Crane Technology Just a few or our profit enhancing parts that can make you whole!

630 Southpointe Court - #200 Colorado Springs, CO. 80906 PHONE: 800-289-5627

719-528-5445 RFitzgerald@FitzGroup.com www.FitzGroup.com

remanufactured!

B.A.M. CNC Stair Stringer Router

Remanufactured, Builders Automation Machinery [BAM] model CNC/MFSR stair router. Does contemporary, box and open stairs, and is the only machine available that also cuts the top and bottom landings. Programmable with a large library stored in the machine for almost all box and open stringers. Remanufactured to include new wiring, rebuilt spindle motors, new drives and is equipped with two variable frequency drive, 5 horsepower, 3 phase motors. Comes with a six-month warranty. A portable 4-bag, 3 phase vacuum which is switched on at the machine controls is available for an additional $1,568. Installation by the OEM is available at an additional charge. 230 volt, 3 phase, 60 amp electrical requirements. 120 p.s.i. at 35 CFM air requirements. $52,000

765-751-9990

Read/Subscribe online at www.componentadvertiser.com

www.woodtrusssystems.com FAX: 800-524-4982

Forward Thinking.

Respecting the Past.

Ask most people about the lumber industry and you’ll get a fairly predictable list of descriptions. What you’re not likely to hear are terms like: ● technologically advanced, ● sustainable logging, ● small log harvesting, ● green lumber products, ● commitment to healthy communities, and ● ecologically-minded forest management When people talk about Vaagen Brothers, that’s exactly what you’ll hear.

Working in the forests of Washington for more than 50 years, we’ve learned to take the best of traditional logging and lumber milling practices and combine them with advanced production technologies and forward-thinking sustainable forest management practices to create a company that’s as vibrant and growing as the healthy forests and ecosystems necessary to its success.

Contact us: (509) 684-5071 or info@vaagenbros.com

M ACdverti$er

Th e

omponent

anufacturing

Adverti$er

Don’t Forget!

You Saw it in the

November 1st, 2016 #09208 Page #51

Smarter Regulation Robert Glowinski is the President & CEO of the American Wood Council (AWC).

T

he American free enterprise system has been the greatest engine for prosperity in world history and has the potential to deliver a promising economic future for our country and around the globe. However, manufacturing in the United States faces significant challenges in an increasingly competitive global economy. The cost, complexity, and sheer number of domestic regulations is greater than ever. Sensible government regulations can provide important benefits, such as protection of the environment, health, and safety. However, when regulations unnecessarily distort the free market or pick winners and losers, they invariably cause unintended harm. Unneeded or poorly designed regulations waste limited resources, undermine sustainable development, and erode the public’s confidence in our government.

Accordingly, regulations must be carefully designed to provide net benefits to the public based on best available scientific and technical information evaluated through a transparent and accountable rulemaking process, with due consideration given to the cumulative regulatory burden on affected industries. The public has a right to know the costs and benefits of regulations and the quality of scientific and economic analyses used to support them.

AWC supports a smarter, more cost-effective regulatory process based on the following principles: • Do More Good Than Harm: Regulators should ensure that the benefits of regulations justify the costs and seek the least costly approach to meet statutory obligations to encourage (not stifle) industry progress.

• Sound Science: Regulatory decisions should be based on the best available scientific and technical information, including an objective evaluation of costs, benefits, and risks reduced.

• Transparency: Agencies should disclose early to the public the data, models, and other key information used in high-impact rulemakings and provide an adequate opportunity for meaningful public input.

• Accountability: Congress should make these principles law for all regulatory agencies and hold agencies accountable for their compliance.

The U.S. House of Representatives has recently passed two bills, the Regulatory Integrity Act of 2016 and Require Evaluation before Implementing Executive Wishlists (REVIEW) Act, both of which AWC supports. The bills would accomplish the following: • Regulatory Integrity Act of 2016 (H.R. 5226) directs each agency to make publicly available on its website or in the rulemaking docket on Regulations.gov a list of each pending regulatory action, the date the agency began to develop or consider the action, its status, an estimate of the date it will be final, and, in effect, a brief description of such action, and each public communication about the action issued by the agency.

• REVIEW Act (H.R. 3438) would require a federal agency to postpone the effective date of a high-impact rule, defined as any rule that may impose an annual cost on the economy of at least $1 billion, pending judicial review.

Although the Senate has not yet passed companion legislation, AWC and its members will continue to work with the U.S. Environmental Protection Agency, other agencies, the administration, Congress, states, and other stakeholders to achieve reasonable regulations that protect the environment and business.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A family owned business you can trust

www.vaagenbros.com

M ACdverti$er

Th e

omponent

anufacturing

Adverti$er

Don’t Forget!

You Saw it in the

Lumber Briefs

November 1st, 2016 #09208 Page #53

By Matt Layman Publisher, Layman’s Lumber Guide

The Save Money Series Part One: Buying Mill Direct

Over decades of purchasing for a large component manufacturer and trading as a lumber broker, I bought and sold well over 25,000 loads of lumber. The most valuable asset I brought to the table as the truss plants’ lumber buyer was confidence to purchase directly from lumber producers.

Lumber Mills Want You to Buy Directly From Them We refer to it in the trade as “buying mill direct” and it is exactly that. Rather than dealing exclusively with lumber brokers, you should buy directly from lumber producers. They prefer to sell directly to the end user and eliminate the middle man.

So what stands in the way of your buying mill direct? Not much.  Lack of contacts…Buyers need to know how to contact producers that make the size, grade and specie you use. (I provide that contact information free to subscribers.)  Fear of failure…Mill sales personnel are no more experienced negotiators than you are. The reality is, without you, they are out of business. They need you as much as you need them.  Prompt-pay…lumber mills insist that customers discount invoices.

Costs of NOT Buying Mill Direct Simply put, not buying mill direct tilts the scales in favor of your non-mill suppliers. When you are not talking directly to the mills, your suppliers know you are unaware of mill prices and will charge you more. As an ex-professional 20-year veteran lumber broker, I can assure you that you are giving away easy money by not buying mill direct.

The Perfect Mix: Brokers, Distributors, and Mill Direct For those of you who already buy “mill direct,” good on ya’. For those of you who are buying exclusively from brokers and distributors, I strongly encourage you to stop and DIVERSIFY. The reasons my brokerage customers bought from me are all good reasons to continue using your brokers and distributors along with buying mill direct.

Brokers provide these services and advantages:  Price…they can offer lower prices by out-positioning other brokers and mills.  Convenience…they do the shopping and present the best options while you multi-task.  Mill direct contacts…they know the players in the market.  Money…customers use brokers like a bank instead of prompt-paying invoices within the mills’ discount terms, 1%-10-ADI.  Emergencies…occasionally you will need something in a hurry. Distributors can be life savers.

Having a mix of a few reliable brokers, a couple of good distributors, along with mill direct contacts will give you the ideal supply chain to keep a balanced and competitively priced inventory.

The most costly mistake any truss plant lumber buyer can make is not taking advantage of all the options…putting all the supply eggs in too few baskets. Diversify, be confident, take control.

Coming next month in the Save Money Series…The Real Cost of Slow Paying Invoices Happy Trading…ml A veteran lumberman, Matt Layman publishes Layman’s Lumber Guide, the weekly forecasts and buying advisories that help component manufacturers save money on lumber purchases every day. You can reach Matt at 336-516-6684 or matt@laymansguide.org.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

The

JobLine

.com

Careers in the Truss, Wall Panel

and Engineereed Wood Components Industry

JobLine Hiring Zone Job Opportunities Available Candidates Services & Products

JobLine.com, inc.

800-289-JOBS

The

November 1st, 2016 #09208 Page #55

www.thejobline.com

job opportunities available

Senior Truss Designer - Truss/ Panel/I-Joist/EWP J12772 Texas

Truss Plant/Location Manager J12851 NE Texas

Multifamily Truss Designer Alpine J12837 South Carolina

Truss Designer - MiTek J12800 Midwest

Senior Truss Designer J12816 USA

Location Manager - Truss/Panel/ Lumber J12832 Pacific Northwest WA/BC market

Production Manager/Plant Manager - Truss J12797 Southeast

Truss Designer Multifamily/ Single family J12792 Colorado

Senior Truss Designer - Truss/ Panel/I-Joist/EWP J12777 Southwest Shift Foreman - Truss J12766 Ohio Truss Designer/Estimator (Panel Too) J12784 PA Outside Sales - Truss/Multifamily J10542 Midwest

Truss Designer - Single Family Tract J12849 AZ

Truss Designer J12846 Beautiful Charleston SC

Truss Plant/Operations Manager J12829 Iowa

Remote Truss Designer J12845 Remote - Eastern Time Zone Only

Truss Designer J11700 Northeast

Multifamily Truss Designer J12842 SC

Production Manager - Truss J12786 South/Southwest

Multifamily Truss Designer J12847 Northern Florida

Technical Outside Sales | Truss Design J12785 Southwest

Single Family Custom Truss Designer J12844 SC

Production Manager - Truss J12780 South/Southwest

Operations Manager - Truss/ Panel/ + Site J12840 Upper Midwest

EWP Designer J12757 Mid-Atlantic Production Manager - Truss J12752 South/Southwest Truss Designer - Truss/Panel/ EWP J12778 Canada

Outside Sales - Truss/Full Building Materials J12827 DFW Texas area Truss Designer J12815 DFW Texas area Remote Truss Designer J12845 Remote - Eastern Time Zone Only

Attention CANDIDATES

We have over 100 Job Opportunities - Nationwide All Job Searches are not public!

We can search behind the scenes to find the right candidate opportunity.

See what I can do for you!

Thomas McAnally 800-289-5627 x1 twm@thejobline.com PHONE: 800-289-5627

Outside Sales - Truss (w/wo Design) J12830 Southwest Entry Level Truss Designer/ Cutting Technician J12834 IL

Multifamily Wall Panel Designer J11691 Midwest

1st Shift Production SupervisorTruss J12828 Colorado Truss Designer - MiTek Sapphire J12804 South Outside Sales - Truss ++ J12822 Midwest Senior Truss Designer - Truss/ Panel J12803 TN Truss Designer - Intermediate to Advanced J12796 Northeast Florida Senior Truss Designer / Truss Design Manager J12779 Midwest 1st Shift Floor Truss Supervisor J12795 GA Truss Designer J12814 Central US Senior Truss Designer - Truss/ Panel J12803 TN

Truss Designer J12841 NC Truss Designer - Alpine J12833 IL Remote Truss Designer - Alpine Req. J12835 Remote

800-289-JOBS

Truss Designer / Senior Truss Designer J11689 Southwest

Remote Multifamily Truss Designer J12843 Remote Eastern Time Zone Only

Truss Designer/Estimator J10574 Texas

JobLine.com, inc.

The

Truss Designer with Panel and EWP/I-Joist experience J12724 Northeast Truss Designer with Panel and EWP/I-Joist experience J12712 Northeast

Job Hunting?

We’re here when you need help! visit: www.thejobline.com

email: mail@thejobline.com or call Thomas McAnally for Personalized Service STRICTLY CONFIDENTIAL!

Candidates seeking jobs: theJobLine.com, Inc. The JobLine specializes in recruiting and placing professionals in the LBM, Engineered Wood Products, Truss, Wall Panel, and Modular industries.

A s t h e C a n d i d a t e ’s intermediary, our process is unique, doesn’t require a resume, and only presents a you to an employer if you approve. All you need to do is create a JobLine Candidate Profile. It’s easy and on line. Just click on the New Candidate tab at the top of the page. Take your time and be thorough. It’s a tool for your future! You can create, save, and update at any time.

You can also specify your job, location, and compensation goals.

Our Recruiters are personally committed to helping you find opportunities that fit your goals.

To register as a New Candidate, visit www.thejobline.com and click on the New Candidates tab.

Multifamily Truss Designer Alpine J12837 Georgia Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

JobLine.com, inc.

JobLine.com, inc.

www.thejobline.com

The

800-289-JOBS

Design Manager/Senior Designer/PE/ Optimizer - Truss/Panel/EWP 30 year industry veteran, started as a Truss Designer, earned his way to Design Manager over 20+ designers. MiTek - Advanced, AutoCAD proficient. BSCE - PE. Compensation: Open??

Thom's Notes: PE with Mid Atlantic seals Relocation: USA - South ID: C10897

Inquire

800-289-JOBS

The

Time To Hire?

We’re here when you need help! visit: www.thejobline.com

email: mail@thejobline.com or call Thomas McAnally for Personalized Service STRICTLY CONFIDENTIAL! Available Candidates Truss/Wall Panel/Site Services Management Plan direct & control daily operations of wall panel & floor panel division. I Provided a complete plant layout and directed the installation and start-up of a 2004 PanelPlus wall panel line. Evaluate productions, plan and manage budgets and direct QC inspections. Provided wall panel designer training & developed design, production & quality control guidelines. Oversee the analysis of data and information and report to upper management. Provided Site supervision & training for home builders and framing contractors. Lead the planning, pricing, scheduling, administration, implementation & installation of all products, floor panels, wall panels, roof trusses & building materials. A typical 2 story house w/basement (1600 +/- sq./ft.) would be erected in 2-5 days ready for shingles. 20 years experience including Outside Sales, coordinating Estimating, Sales, Design, Production, Delivery and Administrative functions of the truss plant with builders, engineers, architects, home owners, project managers, contractors and store managers. Established work schedules, created designs, layouts and Cad drawings as needed. Supervised up to 3 designers, including training new designers.

Coordinated schedules, manufacturing, delivery, billing and job sign off. Resolved problems including collections as needed.

Proficient with MiTek, OptiFrame, and Microsoft Office software.

Relocation: AK, BC, ID, MT, OR, CO, WA, AB, Canada - Western/Central, HI, NV ID: C11220

Inquire

PHONE: 800-289-5627

Outside Sales - Truss/EWP/Lumber I-Joist/Framing Packages/Install Services As an Area Sales Manager, I have many roles. I visit my most of my customers weekly, which range from contractors in the field to lumber yards. I acquire needed documentation, design and price the job, and return the estimates in a timely manner. When the quote becomes a job, I communicate with our shop to fabricate the design. I also schedule deliveries, communicate with customers on delivery times and accurate directions, and once delivered, ensure accuracy and customer satisfaction. I strive to provide top level customer service to all my customers.

Products: EWP, Framing Package, Roof & Floor Truss, Site Install Services, I-Joists, Lumber, Hardware.

Relocation: USA - Southwest, USA Western Inquire ID: C12205 Technical Outside Truss Sales Truss/Panel/I-Joist/Framing Package Has existing roof and floor truss & wall panel clients for multifamily projects in a large area. IN addition to sales, estimating and design, the candidate has managed existing customer relationships, past due accounts, field problems and back-charges.

Perform sales seminars. Pre screen new contacts and gain their trust by designing, engineering, and estimating blueprints of residential and commercial plans.

Compensation: $60's base with $75k+ opportunity Relocation: IA, MN, ND, SD ID: C10996

Inquire Attention Employers We have over 1,000 registered Industry Professionals.

All Job Searches are not public!

We can search behind the scenes to find the right candidate for your opportunity.

See what I can do for you!

Thomas McAnally 800-289-5627 x1 twm@thejobline.com

Hiring Zone - Available Candidates Plant/Location/General Manager Truss Truss and Components Plant Manager with over 15 years of experience in the truss industry who is looking to apply knowledge gained while continuing to develop and grow within the management sector.

As Plant Manager: Create programs to motivate employees to achieve peak productivity. Hire, train, discipline and terminate employees. Order lumber and all production materiel. Coordinate weekly production, sales and safety meetings.

Research cost on purchasing new equipment.

Attended monthly city council meetings to ensure codes were followed. Oversee development of truss fabrication facility.

Ensure compliance with Cal OSHA and Dot. Oversee shipping and optimize freight costs. Responsible for training leads and supervisors on company policy’s. Program and operate computerized equipment.

Proficient with Microsoft Programs, Excel, Word, Outlook, ERP software Team growth and development through effective feedback and ongoing mentorship Excellent communication skills Experience working with: Metal, Polymer Blends, Components, Finished Product Assembly, Clean Room, etc.

Tenacious, Professional, Detail-Oriented, Strong Sense of Urgency Lean Manufacturing Certified, Kaizen Trained, Fork lift Certified Relocation: CA, CO, FL, HI, NM, TX, USA - ALL States, KY, TN, OR, WA ID: C10500 Inquire Production/Design/Location Manager Truss/EWP/Package Design and manage all truss operations. purchase all lumber and plates. Arrange payment and shipping. Troubleshoot every aspect including machinery. Implemented our OSHA safety plan and requirements.

Print invoices and remove material from active inventory using peach tree software.

Set up new customer accounts and validate credit references. Design wood and steel joists and headers. Assist customer project problems for the best economical and practical solution.

Prior: Truss design and supervise. Purchase building material. Arrange billing and shipping from start to finish. From the small detached garage to the large apartment complex, I have done them all...

Relocation: CA, USA - Southwest, USA Western, UT Inquire ID: C12276 Thomas McAnally Personal Recruiter 800-289-5627 x1 www.thejobline.com

Read/Subscribe online at www.componentadvertiser.com

November 1st, 2016 #09208 Page #56 General Manager/Division Manager Truss/Panel/EWP/Lumber An energetic, out-of-the-box, problemsolving, executive with a science-based holistic approach to manufacturing, building products and other business operations; I am recognized for my vision, business acumen, integrity, work ethic and capability to cultivate durable professional relationships.

Practitioner of “Lean and JIT” manufacturing principles, setting metrics, improving key performance indicators, reducing costs, expanding production capacity and sales – all improving the bottom line. Skilled in business analysis, strategic planning, market and sales development; ability to drive multi-million dollar growth, institute “Best Practices” for small to medium emerging and expanding companies, managing budgets to $ 30M with full P&L accountability and oversight.

20+ Years of truss/panel/EWP manufacturing and business management experience. In 2006 at the height of residential construction distributed $ 24.0 in Lumber, Architectural Millwork and Windows and $ 8.5 M in manufactured wood components. In this position optimized design and production process, which increased output and reduced labor and material costs. Hired trained and mentored middle management; negotiated union labor contracts. Implemented “Lean and JIT” fabrication procedures; consolidated raw material inventory, implemented batch fabrication process and continuous production flow. Enhanced scheduling system to accurately track production and achieve on-time delivery, established QC metrics, quality assurance and OSHA-approved safety programs.

After 2006, helped company downsize and then worked as a consultant for turn around opportunities. Computer literate, Alpine and MiTek experience, Microsoft Office.

Inquire Relocation: CO, CT, DE, IL, MD, MA, MN, NJ, NY, PA, WI, NC, OH, IN, KY, LA, ME, MI, MO, OR, SC, VA, DC, NH, VT ID: C11638 Senior Designer/Outside Sales Estimator - Truss/I-Joist/EWP 20+ years experience as a Designer/Senior Designer. Primary duties: design, layout, optimization, and takeoff. Secondary duties: customer service and field measurements.

Software used: MiTek, OptiFrame, Alpine, AutoCAD, Soft Plan, Robbins. Component experience includes floor trusses, roof trusses, I-Joists, EWP, and hardware. Market experience includes single family custom, multi-family, and light commercial. My volume was varied depending on projects.

Also involved in Outside Sales.

Relocation: IL ID: C10536

Inquire

FAX: 800-524-4982

JobLine.com, inc.

The

800-289-JOBS www.thejobline.com

November 1st, 2016 #09208 Page #57

JobLine

The Hiring Zone - Available Candidates .com, inc.

Estimator - Truss/EWP/Lumber Plant/Design Manager Construction Inside sales, designing custom homes, light Preparing quantity and cost estimates for commercial, etc. Managed location, hired My objective is to gain a position as residential and commercial remodeling & fired, scheduled deliveries, purchased a production/plant manager with a projects and some new construction lumber, plates etc. Signed payroll & professional, winning organization where using Sage 100 software, meeting with payables. Jobsite visits for measures prior to I can utilize my years of experience to customers to discuss projects and deliver production. All hats manager, hands on with assist in the continued success and growth proposals, meeting with subcontractors to design, estimating and sales. Experience at of the company. I have a strong desire discuss projects and receive bids, preparing plants from $3-12M. to be a part a great team that has a clear drawings to be used for estimating purposes vision and mission for their stockholders, using SoftPlan software. Bachelor's Degree My objective is to obtain a position where I customers, employees, and for the future. I in Building Construction. Tested 73 on the can use my design & communication skills to help and grow with a company. I am welcome the opportunity for advancement JLTDSE. Inquire detail oriented and enjoy problem solving. and promotion, and am always ready to Meeting deadlines and customer satisfaction accept new responsibilities. I have been Relocation: AL, FL, GA are of high importance to me. involved in the rapid growth of a small truss ID: C11827 plant, a new LGS truss and panel production Truss Designer | Truss Design Manager Relocation: WA Inquire ID: C15921 facility, and timber truss production, | Plant/General Manager - Truss, Wall We’re here when you need help! with responsibility for hiring/training/ Plant Manager Panel, Tall Walls visit: www.thejobline.com managing employees at every stage. In As Designer/Outside Sales: All aspects of Senior (ACE) Truss Designer email: mail@thejobline.com addition to production management, I also roof and floor truss design, estimating to Estimating/Outside Sales have extensive experience in purchasing, plant ready work for single to multi family or call Thomas McAnally Design Manager inventory control, quality control and projects I-joist and LVL design for similar for Personalized Service delivery. I am "long-term" oriented, having types of projects. MiTek eFrame, 20/20 and 6 years experience as Plant Manager with STRICTLY CONFIDENTIAL! been with my current employer 18 years. some Sapphire software experience. another 6 years in Design (one of our very I am looking for the chance to grow few ACE designers): Facilitated the truss and advance within the same company, Outside technical sales in Ontario sale, design, & delivery for lumber salesmen Attention Candidates! depending on my performance and abilities. and Michigan, including cold calling, lacking truss experience. Developed own Is your JobLine Candidate Profile troubleshooting site issues and taking care of customer base by selling trusses. Design Presentation Ready? Request a Go to As Plant Manager: Oversee all areas in established clients. I would classify myself layouts of floor and roof truss systems Meeting on-line conference to review your wood truss, LGS truss, LGS wall panel, as more of a "Hunter" type salesperson as for multifamily/commercial projects. current JobLine Candidate Profile. We can Timber truss production and delivery. opposed to a "Farmer".

Proficient use of MiTek Engineering, show you areas to improve, what’s hurting Production management, Facilities eFrame, AutoCAD, TJBeam, and Excel your chances, and how to improve your Management, Maintenance Management, Also design Weyerhaeuser Tall Walls, I've programs. message. The content is still all about you, Master Production Scheduling, Quality been designing them for 6 months now but with this new tool, we can show you how Control, Safety, Hiring/Firing, Discipline, and enjoy it.

6+ years' experience as Plant Manager to make it tell your story better. See why Human Resources, Purchasing (lumber, including staff development, workforce we say “It’s like having a first interview”. plates, hardware, LGS and accessories, As Design Manager: All HR duties involved management and training, meeting EWP, etc.), delivery, and others as needed. with a design staff of up to 12 designers. production goals, asset management, Budget creation and reconciliation maintenance and capital improvements, Inquire both departmental and company wide. budget development and reporting, Relocation: AL, GA, MS, TN, USA - South Implement and enforce design processes and assuring company policies were TheJobLine searches year around for ID: C12001 and procedures. Developed a program to implemented across all departments. candidates that meet our employer ’s Truss Designer - Remote/MiTek help train new designers but also evaluate requirements. With our state of the art Compensation: $90's + bonus Truss/Panel experienced design staff. website, multiple job board subscriptions, truss designer testing, and the JobLine 23 yeas' design experience. Responsible As GM over a small plant: All aspects and Thom's Notes: One of our top 1% ACE's, candidate profile, we have the tools to do for completing design work assigned by operations of a roof truss plant. Developed young, ready to grow with your company. the job right, Guaranteed! the Design Manager, and responsibilities a training program for production staff Relocation: TX Inquire also included: Reading and interpreting to standardize our building procedure. ID: C11427 I have been doing this for over 23 years. blueprints, estimating, ensure designs Developed quality control measures for Because of my reputation for Strict Senior Designer/Design Manager are accurate, optimized, and conforms to production staff including job tracking at Confidentiality, I am the go-to Recruiter Truss/I-Joist/EWP/Total Structure standards, generate EWP placement layouts the production level. Restructured the entire for our industry.

Design for final construction, generate and provide plant layout to help manage workflow, accurate pricing, Aid in providing job-site efficiencies and cost analysis. Purchased 25 years experience. Can't get too specific Put me on your team and I will show you support with the aid of sales department. new automated equipment to improve on this candidate's current duties but past how having theJobLine as your “Recruiter MiTek Sapphire. our labor costs. Database design to track positions include design manager of 25 Down the Hall” can solve your hiring needs. quotes, orders, scheduling for the plant and designers and inside sales staff. Outside Inquire Relocation: GA deliveries as well as report generating. All technical sales, trouble shooting, repairs, ID: C15914 aspects of HR from hiring to promoting and problem solving on site. Software to terminating. Accounts payable and includes MiTek, Truswal, Keymark, TJ Production Manager/Supervisor receivables with QuickBooks software. xPert, TJ Beam, and Microsoft Office.

Truss/Panel 20 years experience. Responsible for all Talk to me today!

Inquire aspects of truss and panel production, Thom's Notes: Does not qualify for NAFTA, 800-289-5627 x1 inventory, performance reviews. 65 will work remotely and has US account for Relocation: USA - South twm@thejobline.com ID: C11928 workers, $9M year. WTCA quality control payment.

Inquire certified.

Relocation: AB, AZ, BC, CA, Canada See What I can do for You! Compensation: $60's+ Thomas McAnally Eastern, Canada - Western/Central, FL, HI, Personal Recruiter MB, NV, NB, NM, NS, ON, SK, TX Relocation: MN Inquire 800-289-5627 x1 ID: C12360 ID: C10789 www.thejobline.com

Production/Plant/General Manager Truss/Panel/LGS/Wood

800-289-JOBS

Time To Hire?

Attention Employers

Don’t miss the perfect employee!

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

The

JobLine.com

Presents...

Quick Way to Increase Designer Office Space Quality Construction - Not a Job Site Trailer!

• • • • • • • • •

Design Tea

Wood Siding Quiet Interiors Office Lighting Levels Power Outlets As Needed Central Ac/Heat • Thermostat Controlled Carpet or Tile Drywall, Not Cheap Paneling on Walls Professional Environment Bathroom Optional

Available

Affordable | Fast D Don’t Lose Designers o Poor Office Conditio

Cubicle with L shaped desk Overhead cabinet

Cubicle with L shaped desk Overhead cabinet

Cub Ove

Design Manager

Optional Div

Great for Sales and Estimators Too!

Available Nationwide - Contact Thomas McAnally fo

The

designer Approved

JobLine.com

Provided by:

Approved

Herman Miller, Inc. 3D View

Design Team Suite

am Suite

Cubicle with L shaped desk Overhead cabinet

Design Manager

Cubicle with L shaped desk Overhead cabinet

Cubicle with L shaped desk Overhead cabinet

Cubicle with L shaped desk Overhead cabinet

Media Room Plans Storage

e In Days!

Delivery Available! or Production Due To ons or Lack Of Space

bicle with L shaped desk erhead cabinet

vider

8-18-16 ACTON MOBILE 47H.ztx - Office Printed August 18, 2016 Drawing may not be shared without express authorization from author

Cubicle with L shaped desk Overhead cabinet

Media Room Plans Storage or added Office

onal Information

or details! 800-289-5627 x 1 or twm@thejobline.com

Z-AxisÂŽ Software under license from Her

M ACdverti$er

Th e

omponent

anufacturing

Adverti$er

Don’t Forget!

You Saw it in the

Calendar of Events

November 1st, 2016 #09208 Page #60

When? | What? | Where?

NOVEMBER 2016

November 1 – 3 November 2 November 2 – 3 November 4 November 5 – 7 November 7 – 9 November 10 November 10 November 10 – 11 November 15 – 17 November 16 November 17 Nov 30 – Dec 2

NAFCD + NBMDA Annual Convention Central Florida Wood Solutions Fair University of Texas Building Professional Institute (BPI) – 4th Brownsville West Florida Truss Assoc. (WFTA) Building Officials Event APA – The Engineered Wood Assoc. Annual Meeting Western Building Material Assoc. (WBMA) Annual Convention Mid Atlantic SBCA (MASBCA) Chapter Meeting Wisconsin Truss Manufacturers Assoc. (WTMA) Chapter Meeting Mid-America Lumbermens Assoc. (MLA) Fall Fling Annual Meeting AHF Live: Affordable Housing Developers Summit Iowa Truss Manufacturers Assoc. (ITMA) Chapter Meeting Alabama Component Manufacturers Assoc. (ACMA) Chapter Meeting JLC Live Northwest

December 1

Missouri Truss Fabricators Assoc. (MTFA) Chapter Meeting

Chicago, IL Orlando, FL Brownsville, TX Tampa, FL Bonita Springs, FL Portland, OR TBA TBA Branson, MO Chicago, IL Phone & Internet TBA Portland, OR

DECEMBER 2016 Phone & Internet

JANUARY 2017 January 4 – 19 January 9 – 12 January 10 – 12 January 16 – 17 January 18 January 19 January 26 January 31

University of Minnesota 61st Annual Institute for Building Officials Natl. Institute of Building Sciences (NIBS) Building Innovation Conference & Expo NAHB International Builders Show (IBS) Northwestern Lumber Assoc. (NLA) Building Products Expo SBCA – Northeast (SBCA–NE) Chapter Meeting SBCA – New York (SBCA–NY) Chapter Meeting Truss Manufacturers Assoc. of Texas (TMAT) Chapter Meeting Northwestern Lumber Assoc. (NLA) Wisconsin Lumber Dealers Convention

St. Paul, MN Washington, D.C. Orlando, FL Bloomington, MN Phone & Internet Phone & Internet Austin, TX Wisconsin Dells, WI

February 2017 February 15 – 17 February 16 February 20 – 21 February 20 – 23 February 20 – 24

Northeastern Retail Lumber Assoc. (NRLA) Lumber & Building Material (LBM) Expo Mountain States Lumber & Building Material Dealers Assoc. (MSLBMDA) Expo Northwestern Lumber Assoc. (NLA) Iowa Lumber Convention University of Texas Building Professional Institute (BPI) – 17th Houston Inaugural Truss & Frame Exchange

February 22

Iowa Truss Manufacturers Assoc. (ITMA) Legislative Breakfast

March 1 March 7 – 8 March 7 – 10 March 20 – 24 March 24 March 27 – 29 March 29 – 30 March 30 – April 2

Eastern Building Material Dealers Assoc. (EBMDA) Ideas Trade Show Northwestern Lumber Assoc. (NLA) Nebraska Lumber Dealers Convention National Frame Building Assoc. (NFBA) 50th Frame Building Expo ICC Educode JLC Live New England National Lumber & Building Material Dealers Assoc. (NLBMDA) Legislative Conference INTEX Expo, Associated Building Material Distributors of America (ABMDA) Annual Convention

Providence, RI Denver, CO Altoona, IA Houston, TX Auckland, New Zealand Des Moines, IA

MARCH 2017

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

TBA Kearney, NE Nashville, TN Las Vegas, NV Providence, RI Washington, DC Las Vegas, NV Indian Well, CA

FAX: 800-524-4982

M ACdverti$er

Th e

omponent

anufacturing

April 5 – 6 April 5 – 7 April 10 – 12 April 27 – 29

Adverti$er

Don’t Forget!

You Saw it in the

November 1st, 2016 #09208 Page #61

APRIL 2017

Atlantic Builders Convention (ABC) Lumbermen’s Assoc. of Texas & Louisiana (LAT) Annual Convention Introduction to Structural Design of Wood Buildings per the 2015 NDS American Institute of Architects (AIA) Convention

Atlantic City, NJ Grapevine, TX Blacksburg, VA Orlando, FL

MAY 2017 May 8 – 10 May 22 – 16

IndustryWeek Manufacturing & Technology (M&T) Conference & Expo University of Texas Building Professional Institute (BPI) – 25th Arlington

June 4 – 7 June 14 – 16 June 28 – 29

National Fire Protection Assoc. (NFPA) Conference & Expo Southern Forest Products Assoc. (SFPA) Forest Products & Machinery Equipment Expo Pacific Coast Builders Conference (PCBC)

Cleveland, OH Arlington, TX

JUNE 2017 Boston, MA Atlanta, GA San Diego, CA

AUGUST 2017 August 8 – 11

Building Officials Assoc. of Texas (BOAT) Annual Conference

September 24 – 26

ICC Annual Conference with Building Safety & Design Expo

Kerrville, TX

SEPTEMBER 2017 Columbus, OH

OCTOBER 2017 October 25 – 27

Building Component Manufacturers Conference (BCMC)

Omaha, NE

Don’t see your event? Increase attendance and participation by listing your industry focused events here!

E-mail details and event web-link to Anna@componentadvertiser.org. We can’t guarantee space for all events, but all industry related events will be added on a space available and interest to our reader priority.

Square 1 Design & Manufacture Inc. with Spida Machinery present the

2017 INAUGURAL TRUSS & FRAME EXCHANGE NORTH MEETS SOUTH IN NEW ZEALAND Register by: November 16, 2016 Tours: February 20 – 24, 2017

For More Information Click: www.Square1Design.com/Exchange.htm Or Email me at Sean@Square1Design.com

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er

Th e

omponent

anufacturing

Adverti$er

Don’t Forget!

You Saw it in the

November 1st, 2016 #09208 Page #62

Lean Thinking Means No Waste No “TIM WOODS”

By Ben Hershey, Coach & Mentor, 4Ward Consulting Group, LLC

At its core, Lean means no waste. The original Lean (Six Sigma) concept defines 7 wastes (Muda) that exist in business. All process waste is categorized into one or more of these categories. The rules for these wastes apply in both manufacturing and non-manufacturing industries.

Defining and Identifying Waste So what is the definition of “waste” we’re using here? It’s important to understand that our use of the term “waste” doesn't mean “trash” that should be thrown out. Here waste is something which does not add any value for the product or process. In response, we need to alleviate and/or eliminate it. If there is any way to get rid of the waste, it should be done. If there seems to be no way to currently remove the waste, methods should be found to reduce the waste and eventually remove the waste altogether with creativity and technology.

The 8 Wastes of TIM WOODS Over time, one additional item has been added to the waste bucket, so now there are 8 concepts recognized as waste categories. To help you remember them and find ways to apply this to your business, I wanted to find a fun way to introduce you to the concept. So I would like to introduce you to a friend of mine, TIM WOODS.

TIM WOODS is an acronym for the 8 deadly wastes: Transportation, Inventory, Motion, Waiting, Over-processing, Over-production, Defects, and Skills. Additional acronyms exist with slightly different connotations (such as DOWNTIME, which replaces “Skills” with “Non-utilized resources/talent” and “Over-processing” with “Excess processing”), but I prefer TIM WOODS. Its focus is eliminating the time waste to add value in the process and eliminating process time thereby reducing lead time. The 8 wastes are:

•

Transportation Any excess or unnecessary movement of materials or information is transportation waste. Examples include chasing parts, walking to the saw room, moving carts in and out of bays, and moving plates from one end of the building to the other. We can never fully eliminate transportation. But that person who’s transporting things could be adding value to the process in assembly or another area. Look to see where your employees are spending time walking when they should be in assembly or other functional areas.

•

Inventory

Inventory waste can be in the form of piles of information, raw materials, work in process, and finished goods. It can be all of the parts we have, including people. Inventory is an asset we need in order to run the business, but we often get too much of that asset. Inventory is like a big, cozy blanket. When we see the cart piled up with lumber, we feel nice and cozy. “Man, look at that backlog. Look at all that great work we’ve got to do.” But who’s waiting on all that waste? Inventory makes us feel comfortable, but it’s a very expensive way to feel comfortable. Why is it waste? It ties up cash and space. It covers up problems.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er

Th e

•

omponent

anufacturing

Adverti$er

Don’t Forget!

You Saw it in the

November 1st, 2016 #09208 Page #63

Motion.

Any movement or motion that does not add value is motion waste.

Sometimes when we look at our operations, we really do not see this one because we overlook the obvious. We do not see the motions that our teams have “always” done but may not really be necessary to get the process or job done. Each extra step/motion we take should be evaluated. Is it necessary? Do we have to do that to get the truss through the roller? Every time we do it, we have motion waste, which is not adding value to the product.

•

Waiting.

One of the most frustrating forms of waste for employees is waiting.

That involves waiting for lumber to the live deck, carts to be moved into position, pieces to be recut, etc. Look around and consider how many people at any one time are waiting for something. What are we not doing? Working. We take our minds off what we were working on and lose focus. Then we have to jump back to it. Every time you open up another thing to work on, the amount of work you have to manage every day continues to grow—all because I had to wait. Waiting becomes frustrating.

•

Over-processing.

Doing more than is needed is over-processing waste. This also is part of waiting. Because we’re waiting, we over-process and open up another job. It can be over building just because you were trying to get your pieces per hour out of a machine or making sure you worked employees a full shift. If you’ve got all of these half-built tasks sitting in the yard, then you’ve got to get back to that definition of value.

• Over-production.

Doing more than is necessary to meet customer demand is over-production.

This can also be described as “make work.” The industry is taking off right now and people are finding a boom in what’s going on around them. To get more done, we feel like we need to put more into the system. But, you end up putting significantly more in than what comes out. We didn’t solve any problems that we needed to solve. Now we’ve got more costs and people and time tied up, all because we wanted to get more out of the system.

Giving little thought to a comprehensive schedule will create this waste.

•

Defects.

Any mistakes or errors in the business fall into the category of defect waste. Defects are around us every day. Ask yourself these questions: What happened? How did that happen? What are we going to do to fix it?

Defects in the production chain have a sort of ripple effect that can quickly cause bigger problems than simply one item being unusable.

•

Skills.

Under utilizing capabilities and/or delegating tasks with inadequate training creates significant waste of skills. Most companies now realize that their biggest assets are their employees. The employees of a company can make or break it. So why not make the most out of them and get the best utilization out of them? Some of the most successful companies today have been started by previous employees whose ideas were rejected at their place of work.

Good-bye to TIM WOODS, Hello to Lean While every Lean waste has its own challenges, understanding the 8 wastes allows you to be able to identify the process waste. If you can see it, you can eliminate it! Managing your waste will increase your efficiency, productivity, and profit levels. Excellent planning and predictive models, top tier organizational skills, and adaptability will adequately address the vast majority of TIM WOODS challenges that arise.

I’ll return to many of these focal points in future articles, so keep a look out for TIM WOODS. Examining your current processes is the only way to begin improving them. Over the past six years, I’ve worked with numerous component companies and trained them on how to identify and solve these waste issues, so if you need help, please give me a call.

Ben Hershey is the CEO of 4Ward Consulting Group, LLC, the leading provider of Lean Management and Manufacturing Consulting to the Structural Component and Lumber Industry. A Past President of SBCA, he has owned and managed several manufacturing and distribution companies and is Six Sigma Black Belt Certified. You can reach Ben at ben@4WardConsult.com or 623-512-6770.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er

Th e

omponent

anufacturing

Adverti$er

Don’t Forget!

You Saw it in the

November 1st, 2016 #09208 Page #64

Designing Overhangs on Gable Ends

By Randy Shackelford, PE, SE, Simpson Strong-Tie It seems that each major hurricane tends to teach those of us in the construction industry some lesson. With Hurricane Andrew, the lessons were the importance of protection from windborne debris, and the importance of proper construction of gable ends.

There are two main areas where gable ends can fail. One is a failure of the hinge at the connection between the top plate of the wall and the gable end framing, if the gable end is not balloon-framed with continuous studs. This is now addressed in the International Residential Code. Since 2009, Section R602.3 has required that “Studs shall be continuous from support at the sole plate to a support at the top plate to resist loads perpendicular to the wall. The support shall be a foundation or floor, ceiling or roof diaphragm or shall be designed in accordance with accepted engineering practice.”

For existing construction, the International Existing Building Code specifies a method for retrofitting gable ends in Appendix C. For new construction, Simpson Strong-Tie shows a couple of solutions for bracing top plates of gable ends in our High Wind–Resistant Construction Application Guide on Page 48.

Figure 1. Gable Wall Bracing Methods

The other common wind-related failure at gable ends is uplift of the roof decking at the overhang. This can be from two causes: inadequate nailing of the sheathing to supporting framing, or inadequate connections of the framing at the rake edge that supports the roof. As far as this author can tell, this area of light construction is not covered in the PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er

Th e

omponent

anufacturing

Adverti$er

Don’t Forget!

You Saw it in the

November 1st, 2016 #09208 Page #65

International Residential Code for wood framing, but it is covered for cold-formed steel framing, where Section R804.3.2.1.2 contains requirements for “Rake overhangs.” The two methods shown are the cantilever outlooker (Option 1) and the ladder outlooker (Option 2).

Figure 2. IRC Gable Overhand Details

In the photo (Figure 3), it appears that the cantilevered outlooker method was used, and that there was a failure of the outlooker connections at the gable end and the first full truss. If you look closely, the end nails from the full-height truss that were in the end of the outlookers can be seen in a couple of places.

If a truss roof is used with this method, the dropped gable truss is manufactured 3½” shorter than the others. Then a 2×4 outlooker is placed over the dropped gable, and butted into the side of the adjacent full-height truss. Then the barge or fly rafter is attached to the end of the cantilevered outlooker. At the overhang, wind can cause uplift on both the bottom and top surface. The uplift at the end of the outlooker imparts an uplift force at the gable truss, which must be resisted by a tension connection such as a hurricane tie, and a downward force at the connection to the full-height truss.

Figure 3. Gable End Wind Damage PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er

Th e

omponent

anufacturing

Adverti$er

Don’t Forget!

You Saw it in the

November 1st, 2016 #09208 Page #66

Figure 4. Cantilevered Outlooker Method (Gable End wall lateral restraint/bracing at ceiling plane not shown for clarity)

Another method commonly used to support the sheathing and the barge rafter is the ladder method. With this technique, lookout blocks are used to connect the barge or fly rafter back to the gable framing. One way this can be constructed is as a full ladder, with parallel fly rafter and ledger with block framing in between. Either this assembly can be constructed on the ground and then raised and fastened in place, or it can be built in place at the overhang.

There are also examples where a ledger is not used, and the block framing is just connected directly to the top chord of the gable truss or gable rafter. This method is less wind-resistant, and in literature is limited to a 12″ overhang.

Figure 5. Ladder Outlooker Block Method (Gable End wall lateral restraint/bracing at ceiling plane not shown for clarity)

If the gable overhang is to resist wind loads properly, it must either be designed, or constructed in accordance with some pre-engineered prescriptive detail. Figure 4 was originally published in a Simpson Strong-Tie Technical Bulletin, the High Wind Framing Connection Guide. But this Guide is no longer published. As shown earlier in Figure 2, there are some prescriptive details in the IRC for cold-formed steel construction. These are limited to an overhang length of PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er

Th e

omponent

anufacturing

Adverti$er

Don’t Forget!

You Saw it in the

November 1st, 2016 #09208 Page #67

12″ and apply for up to 139 miles-per-hour ultimate wind speed. For wood-framed construction, comparable details are contained in the American Wood Council Wood Frame Construction Manual. For the cantilevered outlooker method, connection design loads are published for various wind speeds. Cantilevered outlookers are permitted to extend out up to 24 inches, while the ladder outlookers are only permitted to extend out 12 inches. See below for excerpted figures and tables from the Wood Frame Construction Manual, courtesy of the American Wood Council.

Figure 6. WFCM Gable Overhang Design (courtesy, American Wood Council, Leesburg, VA)

In addition to the framing design, the connection of the roof decking at this location is critical. If you’re building to traditional construction methods, with 6″ nail spacing at panel edges and 12″ nail spacing at interior supports, the close nail spacing ends up at the nonstructural outer member, while the nailing at the actual roof edge over the gable is only 12″ on center. As shown in the details above, newer documents do indicate the importance of spacing the nails over the gable end at the closest spacing, both because these are subject to the highest withdrawal loads and because this is the edge of the diaphragm for transfer of lateral loads.

The Journal of Light Construction has a discussion of the unbraced gable end overhang on one of their Forums. The Florida Division of Emergency Management provides some information on wind resistance of gable overhangs and some possible means of retrofitting them online.

The post “Designing Overhangs on Gable Ends” first appeared on the Simpson Strong-Tie Structural Engineering Blog. To sign-up to receive the Engineering Blog in your inbox, visit http://seblog.strongtie.com/subscribe/.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er

Th e

omponent OMPONENT

anufacturing ANUFACTURING

st November 1th 2016 May 25 , 2012 #09208 #05144 Page P AGe #68 #27

Adverti$er use la Cabeza, Póngase el Casco de Seguridad

Don’t Forget!

You Saw it IN in THE the YOU S AW IT

Safety First!

Safety Meeting Topics From State Fund CA.

Use Your Head, Wear Your Hard Hat Your head is the most important part of your body. You think, feel, talk, smell, and hear with your head. Therefore, it makes sense that you should protect your head from any injury.

Wearing a hard hat is the first line of defense against head injuries on the job. A hard hat can protect your head against the hazard of falling material and guard against accidental bumping. The hard hat softens any blow to the head. It resists and deflects the blow and distributes the impact over a large area. The hat’s suspension acts as a shock absorber.

Even if the hat dents or shatters, it still takes some of the force out of the blow and off your head. It can also shield your scalp, face, neck, and shoulders against spills or splashes.

Choose the hard hat most suitable for the work being performed and only wear approved hard hats manufactured to meet required standards.

These are made to give your head maximum protection. Make sure your hat fits correctly. Hats that fit right provide you with the most comfort and protection.

The ability of a hard hat to protect a worker depends on the shock absorbing space between the shell and head by the suspension provided.

Therefore, it is important that sweat bands and suspension straps by properly adjusted to obtain the maximum protection. Sunlight and heat can rot the sweatband and straps, so don’t leave your hard hat on the window ledge of your car. Take good care of your hard hat. Don’t drop it, throw it or drill holes in it. Inspect your hard hat every day for cracks, gouges, and frays or breaks in the straps.

Colors can be used to identify different crafts and supervisory personnel, and should be encouraged and given consideration when purchasing such equipment. All levels of supervision should set the example by wearing hard hats. Observe and comply with "Hard Hat Area” sites. Remember! A hard hat is a status symbol; it identifies a safe worker, one who believes in and practices safety.

La cabeza es la parte más importante de su cuerpo. Con ella se piensa, se siente, se habla, se huele y se escucha. Por lo tanto, tiene sentido protegerse la cabeza contra cualquier lesión.

La primera línea de defensa contra las lesiones a la cabeza en el lugar de trabajo es el uso del casco de seguridad. El casco protege la cabeza del peligro de caída de objetos y resguarda contra golpes accidentales. El casco reduce la intensidad de cualquier golpe a la cabeza. Resiste y desvía el golpe y distribuye el impacto sobre un área mayor. La suspensión interna del casco actúa como amortiguador. Aún en el caso de que el casco se quiebre o se abolle, absorbe parte de la fuerza del impacto, transmitiéndole menos a la cabeza. También puede resguardar el cuero cabelludo, la cara, el cuello y los hombros contra derrames o salpicaduras.

Elija el casco más apropiado para el tipo de trabajo que se ejecuta, y sólo use cascos aprobados y fabricados para cumplir con las normas aplicables. Éstos están diseñados para proporcionarle la máxima protección a la cabeza. También es importante asegurarse de que el casco le quede bien. Un casco de la talla correcta proporciona el máximo de confort y protección.

La habilidad del casco de proteger al trabajador depende del espacio para absorber impactos que la suspensión mantiene entre la coraza exterior y la cabeza. Por lo tanto, es importante que la banda y las correas de la suspensión estén ajustadas debidamente para obtener la máxima protección. La luz solar y el sudor pueden podrir la banda y las correas, por lo tanto no debe dejarse el casco bajo la ventana trasera del automóvil. Cuide su casco. No lo deje caer, no lo tire ni le taladre orificios. Inspeccione el casco cada día para asegurar que no tenga grietas, ni surcos y que las correas no tengan roturas ni estén deshilachadas.

Se pueden usar colores para identificar diferentes oficios y al personal de supervisión, y se debe tener en cuenta al efectuar la compra de dichos equipos. Todos los niveles de supervisión deben dar el buen ejemplo usando los cascos de seguridad. Observe y cumpla con los avisos de “Área de casco de seguridad” en los lugares de trabajo. Recuerde, el casco de seguridad es un símbolo de prestigio: identifica a un trabajador seguro, uno que practica y cree en la seguridad.

Safety Meeting Mylon Stark

Date: _____________________ Time: __________________

Presenter: __________________________________________ Department: ________________________________________ Number Present: ________ English: _____ Spanish: ______

605.838.4240 fax 888.519.4130 toll-free 605.220.2342 mobile info@bigpicturesafety.com http://www.bigpicturesafety.com

The above evaluations and/or recommendations are for general guidance only and should not be relied upon for legal compliance purposes. They are based solely on the information provided to us and relate only to those conditions specifically specifically discussed. We do not make any warranty, expressed or implied, that your workplace is safe or healthful or that it complies with all laws, regulations or standards.

PHONE: 800-289-5627 PHONE: 800-289-5627

online at RRead/Subscribe EAD/SUBSCRIBE ONLINE AT www.componentadvertiser.com WWW.COMPONENTADVERTISER.COM

FAX: 800-524-4982 FAX: 800-524-4982

M ACdverti$er

Th e

omponent

anufacturing

Adverti$er

Don’t Forget!

You Saw it in the

News & Announcements

November 1st, 2016 #09208 Page #69

FOR IMMEDIATE RELEASE October 20, 2016 Contact: Frank Devlin Phone: 253-620-7475 E-mail: Frank.Devlin@apawood.org

APA’s PerformancePanels.com website enhanced and updated APA has completed the rebranding and revisions of the PerformancePanels.com website. The website offers details on a wide range of industrial applications for plywood and OSB (oriented strand board) wood structural panels, including concrete forming, furniture, cabinets, transportation, materials handling, and signage.

New Video Features Value Engineering in California Apartment Development

PerformancePanels.com navigation was improved, making it easier for visitors to find the information they need on APA member products for industrial applications. The site also includes a directory and web links to APA Member manufacturers that produce structural wood products for industrial segments.

A new video highlighting the use of wood in a 120-unit California multifamily re-design is available from APA-The Engineered Wood Association.

In the video, APA Engineered Wood Specialist Karyn Beebe talks with developer Barbara Monroy and project engineer Amir Deihimi about how the Santa Barbara Apartments in Rialto, California, were value-engineered to address excessive building material costs. A switch to I-joist compatible glulam, double-sided wood structural panel portal frames, and shear walls using Force Transfer Around openings (FTAO) analysis got the project back in the black while addressing significant seismic loads.

The site search function was also enhanced. Depending in the search terms entered by the user, results will include information from PerformancePanels.com as well as content from the vast APA Resource Library including publications, product reports and CAD details. Contact information for the APA Help Desk is also available on the site.

View the video on APA's Designers Circle website. More information about the project is also provided in a publication: Case Study: Santa Barbara Apartments, Form S125, available for free download from the APA website. Printed copies of the case study are also available for $1 each.

All site content was updated in a new format. In addition to a new design and logo, the site features new content on the use of Structural Composite Lumber (SCL) for industrial applications. PerformancePanels. com also includes extensive technical data about wood structural panels including current information on the new U.S. EPA formaldehyde rules that affect manufacturers of upholstered and solid wood furniture and cabinets.

Visit www.performancepanels.com to see the new site and learn more about plywood, OSB, and engineered wood products for industrial applications. ###

About APA – The Engineered Wood Association Founded in 1933 and based in Tacoma, Washington, APA represents approximately 163 plywood, oriented strand board, glulam timber, wood I-joist, rim board, and structural composite lumber mills throughout the U.S. and Canada. Its primary functions are quality auditing and testing, applied research, and market support and development. www.apawood.org

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er

Th e

omponent

anufacturing

Adverti$er

Don’t Forget!

You Saw it in the

News & Announcements

November 1st, 2016 #09208 Page #70

Joining Habitat in Building Safe, Strong Homes A proud supporter of Habitat for Humanity for more than two decades, Simpson Strong-Tie has been a national sponsor of Habitat for Humanity International since 2007, donating more than $2.5 million in cash and products. The contribution has helped support numerous Habitat houses across North America as well as U.S. and international programs. In addition, Simpson Strong-Tie employees have contributed hundreds of volunteer hours in building homes and training local Habitat affiliates along with joining the Jimmy and Rosalynn Carter Work Projects to repair and build homes affected by natural disasters.

Habitat for Humanity International is a nonprofit organization that is dedicated to eliminating poverty housing around the world. Habitat has helped 6.8 million people find stability and independence through safe and affordable housing. For more information, or to donate or volunteer, visit www.Habitat.org.

As a manufacturer of engineered structural connectors, prefabricated shear wall panels and other fastening systems, Simpson Strong-Tie products are used to attach the roof, walls, floor and foundation together to reinforce the structural frame of a home. Although most homeowners never see these products because they're hidden inside the walls, they actually play an important role in making sure a house stays together, particularly in areas subject to high winds, tornados, hurricanes and earthquakes.

"Our employees are very proud to support Habitat and to work alongside people who truly want to build and live in safe, strong, affordable homes. As a company, we are focused on creating structural products that help people build these homes and buildings, so we are honored to be a part of Habitat’s work," said Karen Colonias, president and CEO of Simpson Strong-Tie.

Habitat Strong In 2016, Habitat for Humanity launched a new program, Habitat Strong, to help its affiliates build more resilient and stronger homes using criteria established by the IBHS® (Institute for Business & Home Safety). Simpson Strong-Tie is proud to be a major sponsor of the program.

Habitat affiliates throughout the country are being invited to participate in training sessions for building to IBHS FORTIFIED Home™ standards. The Habitat Strong program was developed specifically for the Habitat model to be affordable and volunteer-friendly, while offering benefits to partner families that will last for years to come.

“We are very enthusiastic about the new Habitat Strong program that Habitat for Humanity has asked us to support. Habitat Strong is aimed at educating Habitat affiliates on how to build better, including using a continuous load path, which we know improves the resiliency of homes. We’re looking forward to helping Habitat affiliates build homes that will better withstand natural disasters, including earthquakes, tornados and hurricanes,” said Simpson StrongTie president and CEO Karen Colonias.

Employee Involvement in Global Village Program In April 2016, five Simpson Strong-Tie employees had the opportunity to participate in a week-long Habitat for Humanity Global Village Program build in the small town of Amarante, Portugal. The group, along with five other volunteers, was the first to start work on remodeling the 30-plus year-old home of a widowed mother and daughter living in the countryside.

The group spent the week-long project completing a number of renovations, including cutting two new doorways into the granite walls, leveling out the floors, blocking and replacing two doorways, removing paint and concrete from the granite, removing a wood stove pipe, patching holes and other openings, digging a ditch for the waste lines and other improvements.

Habitat’s Global Village Program provides the opportunity to volunteer abroad and build decent, affordable shelter alongside members of the community. The funds raised help build decent shelter in the country the volunteers visit and support the Global Village program.

About Habitat for Humanity International Driven by the vision that everyone needs a decent place to live, Habitat for Humanity has grown from a grassroots effort that began on a community farm in southern Georgia in 1976 to a global nonprofit housing organization in nearly 1,400 communities across the U.S. and in over 70 countries. People partner with Habitat for Humanity to build or improve a place they can call home. Habitat homeowners help build their own homes alongside volunteers and pay an affordable mortgage. Through financial support, volunteering or adding a voice to support affordable housing, everyone can help families achieve the strength, stability and self-reliance they need to build better lives for themselves. Through shelter, we empower. To learn more, visit www.habitat.org.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er

Th e

omponent

anufacturing

Adverti$er

Don’t Forget!

You Saw it in the

November 1st, 2016 #09208 Page #71

News & Announcements

CUSTOMERS FLOCK TO TRIAD BOOTH AT THE BCMC SHOW FOR UNVEILING OF NEW TRIDENT BRIDGE Alda, NE – Triad has always been the leader in the wall building industry and has again taken panelization to the next level. The Trident Panel Nailer/Stapler Bridge was unveiled during the BCMC Show in Knoxville, TN on October 19th 2016.

The builders spoke and we listened. The Trident Bridge was engineered with current and potential customer input. The new bridge incorporates a 3 gun programmable carriage that gives builders flexibility without compromising speed and efficiency.

The Trident bridge is easily controlled with either a joystick or hand crank as well as a touchscreen for on center spacing. The carriage is lined up with a laser and goes across each stud utilizing all three tools as it does. The bridge can detect openings and does not fire the tools as it glides over the top. The Trident Bridge is more efficient than single tool bar bridges with its unique bi directional nailing, and always at the ready carriage system.

The innovative design of the Trident Bridge is a direct result of a cooperative effort from engineers to production level and avoids the fallacy of automation for automation’s sake. The Trident Bridge will fit existing Gen II Sheathing Stations as well as Diamond Quad Tables.

More than just machinery, it’s a tuned, integrated bridge that helps Wall Panel Manufactures have flexibility with tool spacing, selections of tool types, and speed for production.

If the reaction at the BCMC Show is any indication it appears Triad has come up with yet another product the industry has been looking for.

Precise, square walls with reduced labor costs, increased productivity, and increased profits---Triad, the forerunner in the wall panel industry, understands what it is all about.

For over 50 years Triad has been the leading manufacturer of automated, semi-automated and manual wall panel equipment, as well as the automated CNC StairBoss and now the manual Template Stair Router (TSR). No matter if you are a high volume or a low volume operation Triad has the experience you need and the right answers to help you grow. Remember “Keep Calm and Take Control” with Triad. If you are interested in increasing production and decreasing costs please call 800-568-7423 (ext. 133).

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er

Th e

omponent

anufacturing

Adverti$er

Don’t Forget!

You Saw it in the

November 1st, 2016 #09208 Page #72

News & Announcements NEWS RELEASE

ALPINE’S DAVID BRAKEMAN ANNOUNCES RETIREMENT Glenview, IL., October 10, 2016

After 38 years of unwavering determination to advance the state of truss component engineering and construction framing practices for Alpine, its customers and the entire building industry; Engineering Director David B. Brakeman, P.E., S.E. is preparing for his retirement later this year.

“Dave is only the third person to have directed Alpine’s engineering organization, since its inception in 1966. His cumulative contributions to the discipline of wood engineering, building components, structural framing, building codes, engineering standards, design procedures and education have made Alpine even stronger by positively impacting construction practices around the globe.

Virtually every product and service Alpine offers has been improved by the quality of Dave’s leadership and his team’s passion to save production resources, reduce overall costs, improve the quality of all our products, and provide the best possible service to every Alpine customer”, states Kevin Kraft, Business Unit Manager for Alpine, ITW Residential Construction, North America.

Mr. Brakeman’s impressive list of educational and industry accomplishments include a Bachelor of Arts in Physics from Lawrence University in Appleton, Wisconsin in 1978 and a Bachelor of Science in Civil Engineering from Washington University in St. Louis, Missouri in 1980. Dave has served as chairman of the Truss Plate Institute’s Technical Advisory Committee (TAC), the TPI-1 Design Standard Committee, the TPI-4 Design Responsibilities Committee and the Truss Test Project Committee. He is a member of the Structural Building Components Association’s Engineering and Technology Committee.

As an adjunct faculty member at Washington University in St. Louis, he taught the Design of Timber Structures course for 23 years. Dave is a licensed professional engineer in twelve states, and a licensed structural engineer in Illinois. Most recently Dave was named to Rural Builders Hall of Fame.

“Dave’s career accolades are a small indication of the total efforts he has put forth over these many years. On behalf of ITW, Alpine staff, its management, as well as the entire truss and building industry, I thank Dave for his tireless hard work, integrity and remarkable resiliency. His incredibly high standards, drive for perfection, and skills in cultivating an exceptional community of Alpine Engineers are a fundamental part of everything the Alpine brand stands for today. While Dave has decided to step down from his current role, he will continue to drive innovation and product development for Alpine with his on-going contributions to the Residential Design Center. I congratulate Dave for his consummate career efforts,” said Timm Fields, Vice-President and General Manager of ITW’s North American Residential Construction Division.

About Alpine Recognized for its engineering excellence, productivity-enhancing software and equipment solutions, and the industry’s best service, Alpine is a leading provider of building component software, metal connector products and equipment to component manufacturers. Since 1966, the company has partnered closely with customers to enhance their business and productivity. Alpine is also a leader in delivering software solutions that increase homebuilder productivity and profitability. Alpine is part of the Residential Construction (North America) Division of Illinois Tool Works Inc., a Fortune 250 global multi-industrial manufacturing leader with revenues totaling $13.4 billion in 2015. For additional information, visit www.alpineitw.com or www.itw.com.

For additional Information, contact: Michael Fagan, Alpine Marketing Phone: 954.445.5655 Email: mfagan@alpineitw.com ##

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er

Th e

omponent

anufacturing

November 1st, 2016 #09208 Page #73

Adverti$er

Don’t Forget!

You Saw it in the

Letter to the

Editor

Staying Active in Retirement To Carl Schoening on his October article, “The End is here….maybe”:

A

fter working in the Truss and Component Industry for 4½ decades, I was looking forward to retirement. Fishing when I wanted to, golfing when I wanted to. Well, after getting up at 4 o’clock in the morning for 46 years, it has come to an end. No place to go at 4 am, so I guess it’s back to bed where, after tossing and turning, I am up at 4:15.

Guess what – retirement is boring. I golf at least 2 days a week, fish on weekends.

But, one day while I was fishing, I had a brain storm. I can remember the days when we didn’t have designers, so we had to train our own. It’s the same now – we have to train our shop labor, but we just can’t take the time out of our day to train our new hires properly, so we lose more employees than we keep.

To remedy this training problem and help ramp up my retirement plans, I decided to start a training class for production workers. I have done a few classes, and the employees have stayed so far.

It’s a week-long class with 8 hours of training per day. I teach them to read and understand the shop paperwork, proper plate placement, grades of lumber and picking lumber, saw training, setting up trusses, and SAFETY. The class is good for truss shops AND wall panel plants.

If you are interested in having a class at your facility, call me at 931-981 5781 and ask for Don. Don Cernuto Former Operations Manager Apex, NC

Well, I am sure going to miss your articles. I usually read yours first then, if there is time, I’ll read others. Yours are always the most entertaining! Even though you might stir the pot a little, I think most folks would agree with me that yours are the most fun. After all, you gotta have fun to make it all worthwhile.

When you stop having fun, it’s time to move on.

Hope all is well with you. I think you mentioned that you were living in Texas now. I was just there visiting our plants in Houston and Fort Worth.

It’s amazing how much those cities are growing. I lived in Houston all my life up until 2001 and now when I go back I barely recognize the place.

Hang in there, My Friend!

Mark Rolf Trussway Manufacturing, Inc. Letters to the editor are welcome.

Credited comments will be used with permission; contributors may choose to remain anonymous. All submissions may be edited for accuracy and relevance.

Back in the Good Old Days!

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er

Th e

omponent

anufacturing

Adverti$er

Don’t Forget!

You Saw it in the

November 1st, 2016 #09208 Page #74

Letter

to the

Editor

Dear Anna: A recent long span truss collapse during installation reminded me of the new 2009 (and later) IBC bracing requirements for the Owner of a project with metal plate connected (MPC) wood trusses spanning 60 ft. and greater (churches, schools, commercial, retail, and so on). Specifically, the IBC requires the Owner to engage a registered design professional (RDP) to: 1.

Design the temporary bracing for the MPC wood trusses,

2.

Inspect the temporary bracing for the MPC wood trusses,

3.

Design the permanent bracing for the MPC wood trusses, and

4.

Inspect the permanent bracing for the MPC wood trusses.

Frank Woeste, P. E. Professor Emeritus Virginia Tech University

The new 2015 IBC made an important change that required the owner or owner’s authorized agent to contract with a qualified RDP: “2303.4.1.3 Trusses spanning 60 feet or greater. The owner or the owner’s authorized agent shall contract with any qualified registered design professional for the design of the temporary installation restraint/bracing and the permanent individual truss member restraint/bracing for all trusses with clear spans 60 feet (18 288 mm) or greater.” (emphasis added) The Owner’s responsibility for engaging a design professional for items 1 through 4 is also contained within the ANSI/TPI 1–2007 National Design Standard for Metal Plate Connected Wood Truss Construction which is the IBC referenced standard for MPC wood trusses. Prior to the 2009 IBC, the IBC did not require an RDP to be responsible for items 1, 2, and 4 listed above.

It is unlikely that Contractors who purchase wood trusses would be aware of the IBC and TPI requirements summarized in items 1, 2, and 4 listed above, yet their truss erection work can be dramatically impacted by a lack of a temporary bracing design and inspection by an RDP. Because the greatest risk of long span truss collapse is most likely during the installation process, I believe CM’s and Truss Designers should consider adding a special and prominent note on the Truss Design Drawings (TDDs) that emphasizes the IBC requirements (1 and 2) that can prevent truss installation accidents and related injuries.

Although this 60 ft. rule is present in some industry literature, it is not completely clear that it is an “IBC requirement” versus an “industry recommendation.” The 60 ft. rule is addressed in the 2015 BCSI Book, page x, under the heading of “Building Designer Checklist”: Most helpful for truss installation safety would be a “standardized note” for TDDs developed by a TPI Committee that could be adopted and used by CMs. This note could alert and direct the Contractor to the Construction Documents for the IBC required “temporary” and “permanent” bracing design work when the Contractor reviews the proposed Truss Design Package. The truss package review stage is a logical time to address the IBC bracing design requirements. The note on the TDDs would also alert the Contractor as to the IBC requirement for Special Inspection of the “Temporary Installation Restraint/Bracing” before moving forward.

As a new graduate student at Purdue University in 1973, one of the first truss issues I learned from the late Dr. Stan Suddarth was the recurring problem of long span truss collapses during installation. He and his peers noted that the most common case involved churches or long-span agricultural trusses. Fast forward four decades, long span truss installation remains a safety issue; however, we now have “code” that specifically addresses the issue which is a positive step forward. The remaining challenge for the industry is discovering methods to reasonably ensure Contractors and Building Designers are aware of the IBC temporary bracing design and inspection requirements for 60 ft. and greater trusses.

The author welcomes comments and discussion. Letters to the Editor should be sent to Anna Stamm.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er

Th e

omponent

anufacturing

November 1st, 2016 #09208 Page #75

Adverti$er

Don’t Forget!

You Saw it in the

The Last

Word...

Where is the Truss Business Headed?

A

Joe Kannapell - Senior VP MiTek Industries, Inc. www.mii.com

t BCMC, we learned that a recession often follows a presidential election, but that housing may not be much affected this time (per Mark Vintner of Wells Fargo). Many of us shrugged this off, especially after observing the brisk sales activity on the show floor, though our past experience keeps us concerned.

While history has shown that truss sales are directly related to housing starts, the same cannot be said about truss equipment sales. The two steepest declines in housing occurred in 1973–1975 and 2006–2010. Yet, at the Show in Louisville in 1973, we set a record for roof truss equipment sales. We set another record in 2006 at BCMC. Should we now worry since we reached another high mark this year at BCMC? Maybe not, if we examine the marked differences between then and now in the chart below.

In 1973, we were clearly euphoric when business was twice as good as it had been in the previous decade. We built our first new plant in the St. Louis suburbs, and then faced a painful comeuppance right after Gerald Ford became president. The change of administration, though, had little to do with our decline, precipitated by galloping inflation, rising interest rates, price controls, and the painful aftermath of the Vietnam War. In 2006, we couldn’t help reprising our overconfidence after a decade and a half of housing growth. Our 30 year old memories faded fast as we welcomed construction of a much larger plant, but soon relived the pain of the past – only this time it burned twice as long. Why did we ignore the vulnerability of operating at a level 50% higher than the average level of the previous 40 years? Industry scions, like Calvin Hall, who prematurely predicted the recession were in the minority. In retrospect, even if the boom had extended into 2008, the fall was sure to come.

Partly to blame for our poor plant expansion timing is our uncertainty over what constitutes a “normal” level of business.

Our current rise to 1.14 million starts (after we had dropped to half a million) seems to be sustainable. Most economists don’t believe we will relive the pitfalls of the past that eroded housing – high interest rates, spiking oil prices, or raging inflation. We’re still at a level of housing starts that we have experienced only 4 times in our history prior to this recent recession. Mr. Vintner forecasted a gradual interest rate increase of only one percent in the near term. Fracking technology lessens the risk of another oil spike which, in turn, lessens the likelihood of inflation. The numbers of adult children living with parents is not increasing. Those who create new households either have to live under a set of roof trusses in a detached home, or walk over a set of floor trusses in higher density housing; both good trends for our business.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

YOUR FUTURE. OUR FOCUS.

Commited to your future, MiTekÂŽ is dedicated to improving the component manufacturing industry through improved efficiency, productivity, and collaboration. We help power the growth of your business by offering you valuable assets, including results-driven software, machinery, products, our support team, and free access to MiTek University. Because we define success one way: yours.

Learn more at Mitek-US.com.

Page 76

Š 2016 MiTek, All Rights Reserved.