Installing Drip Edge on Existing Roof
A drip edge is your roofing system’s substantial component, protecting your home and roof. It is a type of angled roof flashing, usually composed of metal, such as aluminum, copper, or steel. If correctly placed, the drip edge runs around the whole perimeter of the roof. Fitting the flange and using the roofing cement and nails may simplify drip edge installation on an existing roof. Fortunately, it is a quick and straightforward task, so read on to learn how to put a drip edge on a prevailing rooftop. You may also engage a recognized roofing company in MoorPark to install the drip edge. However, installing a drip edge might be intimidating for the inexperienced roofer. This article will explain why you need the drip edge and how to install it correctly. That way, you won't be upset about what to do.
How far away from the fascia should the drip edge be? Generally, the bottom border of your roof should extend 3/4 inches past the fascia board, allowing runoff to flow into gutters. If the overhang is too short, the water will drip below your gutters, causing fascia and roof sheathing to decay, discolored siding, and even a flooded basement or eroding soil. Drip edge installation may help eliminate excess runoff that can damage the roof, the exterior of the property, and potentially the basement. Diligently install the drip edge since poor installation can bring just as many water-related issues as not having a drip edge.