How to Solve Radar System Errors in your Mercedes

Generally, radar system errors occur in your Mercedes, when the sensors and cameras are covered in dirt and snow.

The radar system either won't function at all or cause unnecessary braking, deceleration or swerving because of incorrect sensor readings.

When the winter arrives, then it becomes more important to ensure the various radar sensors in your Mercedes are clean, clear and unobstructed.

You must take extra care when cleaning them off and follow guidelines for keeping them clean and ready to provide their full function for autonomous driving.

Below mentioned are some of the common sensors and cameras associated with the radar system errors in your Mercedes.

Always clean the sensor mounted on the front grill and remove the dirt that may have accumulated on the sensor.

A camera is mounted on top of your windshield which should be cleaned and also inspect for any rock chips.

These sensors can get dirty very easily. So, use a clean cloth to remove dirt and grime for the sensors.

You must gently remove snow, ice or dirt building upon the sensors & cameras on the side mirrors of your Mercedes.

Also, clean the dirt from the front camera located below the Mercedes star and the camera above the rear license plate.

Make sure to clean the distance sensor, which is normally located behind the front bumper.

Depending on the model of your Mercedes, you will have cameras and sensors at various locations.

You must gently brush the snow and chip the ice away off all your radar sensors or else you can easily damage the sensors.

Damage from road debris like sand and rocks can even permanently damage your radar sensors and cameras.

Even after cleaning all the radar sensors, if you are getting a constant error message on the dashboard, then consult a good Mercedes technician.

https://www.completeautomotivesystems.com/ https://www.facebook.com/CompleteAutomo tiveSystems