Detail
Bimota motorcycles sold through the Kawasaki Motors Europe N.V. (KME) dealer network will be covered by an EU wide warranty only via authorised KME Bimota dealers. Authorised KME Bimota distributors should share this information in the appropriate way as needed to inform their applicable dealers.
Warranty coverage:
24 months for road motorcycles. 6 months for spare parts. Refer to the warranty terms and conditions for details.
WarrantyPlus is not available for Bimota products. However, due to system configuration, the WarrantyPlus registration function in DealerNet cannot be switched off for these models. Should a WarrantyPlus registration be incorrectly made, it will be subsequently removed by KME After Sales Department (ASD).
Warranty Registration:
The Bimota motorcycle must be warranty registered in DealerNet in the same way as a Kawasaki product.
Welcome letter:
Following warranty registration, the customer will receive a welcome letter from KME
Certificate of conformity (CoC):
A Bimota CoC is available to print from the DealerNet system once warranty registration has been completed.
The same process is to be followed as for a Kawasaki motorcycle warranty registration. The CoC should be handed over to the customer with the motorcycle.
Warranty coverage for units not sold by authorised KME Bimota dealers: This warranty is not available from KME for Bimota products sold by other distributors with direct contracts with Bimota, such as, but not limited to, those in Switzerland, Poland, United Kingdom, Czech Republic, Slovakia, and Israel.
KME acts as a distributor for Bimota in a limited number of EU markets, for which KME receives a predefined contribution to pay any resulting warranty claims. The only exception would be for recall claims. If needed, these may be processed in the same way as a recall claim for an imported Kawasaki product.
Warranty booklet & Owner’s Manual (OM):
Warranty booklet & Owner’s Manual (OM):
A unique KME Bimota warranty booklet is available and should be handed over by the dealer together with the Owner’s Manual.
A unique KME Bimota warranty booklet is available and should be handed over by the dealer together with the Owner’s Manual.
BREAKDOWN - In the event of a breakdown it is the owner’s responsibility to ensure the product is taken to a KME authorised Bimota Dealer for attention.
Note: The warranty booklet provided by Bimota in the crate should be discarded and replaced with the KME one.
The dealer should provide the owner’s manual (OM) to the customer with the motorcycle.
Note: The warranty booklet provided by Bimota in the crate should be discarded and replaced with the KME one.
The dealer should provide the owner’s manual (OM) to the customer with the motorcycle
KME will not be responsible for recovery costs, or any other costs associated with the transportation of a product to a KME authorised Bimota Dealer if, upon inspection by the KME authorised Bimota Dealer, the problem is found not to have been caused by a manufacturing defect.
Warranty claims process:
If the product is sold or transferred, the change of ownership must be notified to KME as soon as possible as described below.
Warranty claims process:
KME’s DealerNet warranty system can be used to make claims only for Bimota products sold through KME The claim process is identical to that for current Kawasaki product claims. Each claim must have photos of the defective part(s) attached If photos are not provided the claim will be rejected.
KME’s DealerNet warranty system can be used to make claims only for Bimota products sold through KME The claim process is identical to that for current Kawasaki product claims. Each claim must have photos of the defective part(s) attached If photos are not provided the claim will be rejected
SERVICE REQUIREMENTS - Refer to your owner’s manual for details of the service schedule and routine maintenance.
Any questions regarding a claim (including for flat rate times) should be sent to KME at: bimotatech@kawasaki.eu
TRAVELLING ABROAD - If you are planning to travel to other countries on or with your machine, we ask you to note the following points.
Any questions regarding a claim (including for flat rate times) should be sent to KME at: bimotatech@kawasaki.eu
Warranty for spare parts:
a) Ensure the service schedule is up to date. You may need to get your next service carried out early depending on the length and duration of your trip.
b) Take out suitable travel insurance and breakdown cover.
Warranty for spare parts:
All claimed bespoke Bimota spare parts must be returned to Kawasaki Motors Europe N.V.
c) Take your warranty registration details and your owner’s manual with you.
All claimed bespoke Bimota spare parts must be returned to Kawasaki Motors Europe N.V.
Pre-Delivery Inspection:
d) If you do experience any problems with your machine, we strongly recommend that you contact the nearest KME authorised Bimota Dealer
Pre-Delivery Inspection:
A Bimota PDI form is available on K-TISC for users authorised to view Bimota materials It can be found in the Service / A&P Manuals section for the applicable models.
e) You can contact the local Bimota distributor, if necessary, by visiting www.bimota.it and searching for the relevant distributor.
A Bimota PDI form is available on K-TISC for users authorised to view Bimota materials. It can be found in the Service / A&P Manuals section for the applicable models.
BIMOTA GENUINE ACCESSORIES AND SPARE PARTS WARRANTY
Warranty Booklet Contents / Terms and Conditions:
Warranty Booklet Contents / Terms and Conditions:
IMPORTANT NOTICE
KME warrants each new part or accessory to be free of manufacturing defects for the period shown below from the original date of sale by an KME authorised Bimota Dealer.
IMPORTANT NOTICE
GENUINE ACCESSORIES AND SPARE PARTS WARRANTY PERIODS
Bimota motorcycles are sold by various distributors in different markets. This warranty booklet only applies to those Bimota products sold and distributed by Kawasaki Motors Europe N.V (KME) in its applicable European markets. For products sold through any other network please contact Bimota at www.bimota.it/contatti or email info@bimota.it for advice about how to obtain the correct warranty documentation and terms and conditions.
Bimota motorcycles are sold by various distributors in different markets. This warranty booklet only applies to those Bimota products sold and distributed by Kawasaki Motors Europe N.V (KME) in its applicable European markets. For products sold through any other network please contact Bimota at www.bimota.it/contatti or email info@bimota.it for advice about how to obtain the correct warranty documentation and terms and conditions.
WARRANTY COVER
WARRANTY COVER
Kawasaki Motors Europe N.V (herein after KME) warrants Bimota motorcycles sold by KME to be free of manufacturing defects for the period shown in the table from the original date of sale by a KME authorised Bimota Dealer.
TERMS AND CONDITIONS - ACCESSORIES AND SPARE PARTS
Kawasaki Motors Europe N.V (herein after KME) warrants Bimota motorcycles sold by KME to be free of manufacturing defects for the period shown in the table from the original date of sale by a KME authorised Bimota Dealer.
The warranty terms and conditions are the same as those specified in this booklet for Bimota products. Please refer to them noting that the following exclusions apply.
If, within the warranty period, a failure occurs which is determined by KME to be caused by a manufacturing defect, KME will, at its discretion, arrange for the repair or replacement of the necessary parts at no cost to the customer. This can be carried out by any KME authorised Bimota Dealer. However, it is recommended that you have repairs and servicing done by the original selling dealer who has a full history and knowledge of your product.
If, within the warranty period, a failure occurs which is determined by KME to be caused by a manufacturing defect, KME will, at its discretion, arrange for the repair or replacement of the necessary parts at no cost to the customer. This can be carried out by any KME authorised Bimota Dealer. However, it is recommended that you have repairs and servicing done by the origi nal selling dealer who has a full history and knowledge of your product.
The warranty period will start from the date of sale to the customer or from the date of first use, whichever is earlier. If a machine is sold but not taken from the selling dealer by the customer until a later date, the warranty period will start from the actual date of handover to the customer.
The warranty period will start from the date of sale to the customer or from the date of first use, whichever is earlier. If a machine is sold but not taken from the selling dealer by the customer until a later date, the warranty period will start from the actual date of handover to the customer.
CATEGORY
CATEGORY
a. This warranty does not cover repair or replacement required because of: i. accident, ii. misuse or neglect, iii. lack of reasonable and proper maintenance, iv. incorrect installation or assembly, v. repairs improperly performed, or replacements improperly installed, vi. use of parts or accessories not conforming to Bimota's specifications, vii. modifications not recommended or approved in writing by Bimota, and/or viii. normal wear and deterioration caused by using the Bimota part or accessory.
WARRANTY
PERIOD
WARRANTY PERIOD
b. The following are specifically excluded from the terms and provisions of this warranty:
WARRANTY TERMS AND CONDITIONS
WARRANTY TERMS AND CONDITIONS
i. Any Bimota part or accessory used on a product designed for or engaged in competitive racing.
ii. Any Bimota part installed or used on another manufacturer’s product.
IMPORTANT - please make sure you have read and understood these terms and conditions. If you have any questions, please contact your KME authorised Bimota Dealer.
Note the following terms used throughout this document:
iii. Any Bimota accessory modified for use or installed on a model for which it is not designed or recommended.
IMPORTANT - please make sure you have read and understood these terms and conditions. If you have any questions, please contact your KME authorised Bimota Dealer.
‘Bimota’ = Bimota S.P.A
Note the following terms used throughout this document:
iv. Any Bimota accessory modified for use on another manufacturer’s product.
‘KME’ = Kawasaki Motors Europe N.V as distributor of Bimota in selected countries
‘Bimota’ = Bimota S.P.A
‘KME authorised Bimota Dealer’ = Official Bimota dealer authorised by KME.
‘KME’ = Kawasaki Motors Europe N.V as distributor of Bimota in selected countries
v. Labour costs for fitting replacement parts under this warranty unless the original warranted part or accessory was fitted by a KME authorised Bimota Dealer.
This warranty contains obligations and exclusions solely on the part of KME and not on the part of any KME authorised Bimota Dealer.
‘KME authorised Bimota Dealer’ = Official Bimota dealer authorised by KME.
This warranty contains obligations and exclusions solely on the part of KME and not on the part of any KME authorised Bimota Dealer.
Nothing in this document shall be construed as an agency between KME and any of the KME authorised Bimota Dealers or their staff.
Nothing in this document shall be construed as an agency between KME and any of the KME authorised Bimota Dealers or their staff.
GI23-002 rev Page 2 of 5
Technical Information Section, Kawasaki Motors Europe NV.
Under current EU Consumer Law, you have certain statutory rights contained within legislation governing the sale of goods to consumers (private users). This warranty does not in any way detract from or affect the statutory rights of the purchaser. This warranty provided by KME only applies to those Bimota products sold and distributed by Kawasaki Motors Europe N.V (KME) in its applicable European markets.
BREAKDOWN - In the event of a breakdown it is the owner’s responsibility to ensure the product is taken to a KME authorised Bimota Dealer for attention.
KME will not be responsible for recovery costs, or any other costs associated with the transportation of a product to a KME authorised Bimota Dealer if, upon inspection by the KME authorised Bimota Dealer, the problem is found not to have been caused by a manufacturing defect. If the product is sold or transferred, the change of ownership must be notified to KME as soon as possible as described below.
WARRANTY EXCLUSIONS
KME will not accept responsibility if, in its sole opinion, the part or parts require repair or replacement as a direct result of:
SERVICE REQUIREMENTS - Refer to your owner’s manual for details of the service schedule and routine maintenance.
a. Alteration from standard specification in a manner which affects the performance, durability, or safety of the product or any of its component parts or genuine Bimota accessories. e.g.:
TRAVELLING ABROAD - If you are planning to travel to other countries on or with your machine, we ask you to note the following points.
a) Ensure the service schedule is up to date. You may need to get your next service carried out early depending on the length and duration of your trip.
i. The fitment of non-genuine Bimota parts or accessories unless these are recommended or approved in writing by Bimota.
b) Take out suitable travel insurance and breakdown cover.
ii. Modifications or adjustment not recommended or approved in writing by Bimota.
c) Take your warranty registration details and your owner’s manual with you.
iii. The fitment of Bimota Racing Parts.
d) If you do experience any problems with your machine, we strongly recommend that you contact the nearest KME authorised Bimota Dealer
b. The use of lubricating oils, fuel, or other fluids (including cleaning materials) which are not in accordance with the recommendations contained in the owner’s manual.
e) You can contact the local Bimota distributor, if necessary, by visiting www.bimota.it and searching for the relevant distributor.
c. Improper use, improper repair (this includes fitment of non-genuine or ‘pattern’ parts); accidental or fire damage, contamination by or submergence in water.
BIMOTA GENUINE ACCESSORIES AND SPARE PARTS WARRANTY
KME warrants each new part or accessory to be free of manufacturing defects for the period shown below from the original date of sale by an KME authorised Bimota Dealer.
GENUINE ACCESSORIES AND SPARE PARTS WARRANTY PERIODS
d. Deterioration due to normal wear and tear in service. The warranty does not cover routine service adjustment or normal replacement of service items (such as oils, fluids, spark plugs, filters) or wear and tear items (such as batteries, brake and clutch friction materials, drive chains or belts and tyres, cables, and bearings). However, such items are covered if replacement is required because of a manufacturing or material defect.
e. Any damage or consequential damage caused by accident or by operator neglect or abuse.
The warranty may not apply if:
a. The periodic maintenance and servicing are not carried out by a KME authorised Bimota Dealer at the appropriate intervals as specified in the relevant owner’s manual. Evidence of this servicing must be produced, if requested, at the time of any warranty claim.
It is the owner’s responsibility to ensure the service records are kept up to date by the servicing KME authorised Bimota Dealer. It is advisable to also keep copies of any service or repair invoices.
TERMS AND CONDITIONS - ACCESSORIES AND SPARE PARTS
b. Any problem experienced is not notified to a KME authorised Bimota Dealer within a reasonable time or the product is not properly inspected by that KME authorised Bimota Dealer.
The warranty terms and conditions are the same as those specified in this booklet for Bimota products. Please refer to them noting that the following exclusions apply.
The owner should take all possible steps to prevent further damage as soon as any problem is apparent. Any consequential damage that is caused by the continued use of the product after a problem has been identified may not be covered by this warranty.
Any Bimota products used for competitive racing or related use are specifically excluded from the terms and provisions of this warranty.
HOW TO MAKE A CLAIM
If you experience any problem with your product which is covered by this warranty, then you should take the following steps:
a. This warranty does not cover repair or replacement required because of: i. accident, ii. misuse or neglect, iii. lack of reasonable and proper maintenance, iv. incorrect installation or assembly, v. repairs improperly performed, or replacements improperly installed, vi. use of parts or accessories not conforming to Bimota's specifications, vii. modifications not recommended or approved in writing by Bimota, and/or viii. normal wear and deterioration caused by using the Bimota part or accessory.
b. The following are specifically excluded from the terms and provisions of this warranty:
a) If the problem is likely to cause further damage, or presents any kind of safety risk, stop using your machine immediately and contact your nearest KME authorised Bimota Dealer for advice. Should a problem occur, it is essential to report this to your KME authorised Bimota Dealer at the earliest opportunity to enable them to investigate. As the owner of the product, you must ensure that all reasonable steps are taken to prevent any possible further direct or consequential damage.
i. Any Bimota part or accessory used on a product designed for or engaged in competitive racing.
ii. Any Bimota part installed or used on another manufacturer’s product.
iii. Any Bimota accessory modified for use or installed on a model for which it is not designed or recommended.
iv. Any Bimota accessory modified for use on another manufacturer’s product.
b) If the problem has no effect on the operation of your machine, contact your KME authorised Bimota Dealer and make an appointment for the product to be inspected.
v. Labour costs for fitting replacement parts under this warranty unless the original warranted part or accessory was fitted by a KME authorised Bimota Dealer.
c) The KME authorised Bimota Dealer will confirm your warranty cover and inspect your machine to determine the cause of the problem, consulting with KME if necessary. If the problem is judged to have been caused by a manufacturing defect, they will submit a warranty claim to KME on your behalf and, upon acceptance by KME, carry out any necessary repairs free of charge.
MISCELLANEOUS
Dealer and make an appointment for the product to be inspected.
c) The KME authorised Bimota Dealer will confirm your warranty cover and inspect your machine to determine the cause of the problem, consulting with KME if necessary. If the problem is judged to have been caused by a manufacturing defect, they will submit a warranty claim to KME on your behalf and, upon acceptance by KME, carry out any necessary repairs free of charge.
MISCELLANEOUS
BREAKDOWN - In the event of a breakdown it is the owner’s responsibility to ensure the product is taken to a KME authorised Bimota Dealer for attention.
GI23-002 rev
BREAKDOWN - In the event of a breakdown it is the owner’s responsibility to ensure the product is taken to a KME authorised Bimota Dealer for attention.
Page 3 of 5
Technical Information Section, Kawasaki Motors Europe NV.
KME will not be responsible for recovery costs, or any other costs associated with the transportation of a product to a KME authorised Bimota Dealer if, upon inspection by the KME authorised Bimota Dealer, the problem is found not to have been caused by a manufacturing defect. If the product is sold or transferred, the change of ownership must be notified to KME as soon as possible as described below.
KME will not be responsible for recovery costs, or any other costs associated with the transportation of a product to a KME authorised Bimota Dealer if, upon inspection by the KME authorised Bimota Dealer, the problem is found not to have been caused by a manufacturing defect. If the product is sold or transferred, the change of ownership must be notified to KME as soon as possible as described below.
SERVICE REQUIREMENTS - Refer to your owner’s manual for details of the service schedule and routine maintenance.
SERVICE REQUIREMENTS - Refer to your owner’s manual for details of the service schedule and routine maintenance.
TRAVELLING ABROAD - If you are planning to travel to other countries on or with your machine, we ask you to note the following points.
TRAVELLING ABROAD - If you are planning to travel to other countries on or with your machine, we ask you to note the following points.
a) Ensure the service schedule is up to date. You may need to get your next service carried out early depending on the length and duration of your trip.
a) Ensure the service schedule is up to date. You may need to get your next service carried out early depending on the length and duration of your trip.
b) Take out suitable travel insurance and breakdown cover.
b) Take out suitable travel insurance and breakdown cover.
c) Take your warranty registration details and your owner’s manual with you.
c) Take your warranty registration details and your owner’s manual with you.
d) If you do experience any problems with your machine, we strongly recommend that you contact the nearest KME authorised Bimota Dealer
d) If you do experience any problems with your machine, we strongly recommend that you contact the nearest KME authorised Bimota Dealer
e) You can contact the local Bimota distributor, if necessary, by visiting www.bimota.it and searching for the relevant distributor.
e) You can contact the local Bimota distributor, if necessary, by visiting www.bimota.it and searching for the relevant distributor.
BIMOTA GENUINE ACCESSORIES AND SPARE PARTS WARRANTY
BIMOTA GENUINE ACCESSORIES AND SPARE PARTS WARRANTY
KME warrants each new part or accessory to be free of manufacturing defects for the period shown below from the original date of sale by an KME authorised Bimota Dealer.
KME warrants each new part or accessory to be free of manufacturing defects for the period shown below from the original date of sale by an KME authorised Bimota Dealer.
GENUINE ACCESSORIES AND SPARE PARTS
WARRANTY PERIODS
GENUINE ACCESSORIES AND SPARE PARTS WARRANTY PERIODS
TERMS AND CONDITIONS - ACCESSORIES AND SPARE PARTS
TERMS AND CONDITIONS - ACCESSORIES AND SPARE PARTS
The warranty terms and conditions are the same as those specified in this booklet for Bimota products. Please refer to them noting that the following exclusions apply.
The warranty terms and conditions are the same as those specified in this booklet for Bimota products. Please refer to them noting that the following exclusions apply.
a. This warranty does not cover repair or replacement required because of: i. accident, ii. misuse or neglect, iii. lack of reasonable and proper maintenance, iv. incorrect installation or assembly, v. repairs improperly performed, or replacements improperly installed, vi. use of parts or accessories not conforming to Bimota's specifications, vii. modifications not recommended or approved in writing by Bimota, and/or viii. normal wear and deterioration caused by using the Bimota part or accessory.
a. This warranty does not cover repair or replacement required because of: i. accident, ii. misuse or neglect, iii. lack of reasonable and proper maintenance, iv. incorrect installation or assembly, v. repairs improperly performed, or replacements improperly installed, vi. use of parts or accessories not conforming to Bimota's specifications, vii. modifications not recommended or approved in writing by Bimota, and/or viii. normal wear and deterioration caused by using the Bimota part or accessory.
b. The following are specifically excluded from the terms and provisions of this warranty:
i. Any Bimota part or accessory used on a product designed for or engaged in competitive racing.
ii. Any Bimota part installed or used on another manufacturer’s product.
b. The following are specifically excluded from the terms and provisions of this warranty: i. Any Bimota part or accessory used on a product designed for or engaged in competitive racing. ii. Any Bimota part installed or used on another manufacturer’s product. iii. Any Bimota accessory modified for use or installed on a model for which it is not designed or recommended.
iii. Any Bimota accessory modified for use or installed on a model for which it is not designed or recommended.
iv. Any Bimota accessory modified for use on another manufacturer’s product.
iv. Any Bimota accessory modified for use on another manufacturer’s product.
v. Labour costs for fitting replacement parts under this warranty unless the original warranted part or accessory was fitted by a KME authorised Bimota Dealer.
v. Labour costs for fitting replacement parts under this warranty unless the original warranted part or accessory was fitted by a KME authorised Bimota Dealer.
TRANSFER OF WARRANTY
BREAKDOWN - In the event of a breakdown it is the owner’s responsibility to ensure the product is taken to a KME authorised Bimota Dealer for attention.
This warranty is transferable at KME’s discretion subject to the Terms and Conditions set out in this booklet having been met.
KME will not be responsible for recovery costs, or any other costs associated with the transportation of a product to a KME authorised Bimota Dealer if, upon inspection by the KME authorised Bimota Dealer, the problem is found not to have been caused by a manufacturing defect.
To transfer this warranty, either ask your KME authorised Bimota Dealer to make the transfer using their on-line system email bimotatech@kawasaki.eu quoting all the details from your warranty registration document, including the date of purchase and mileag e.
If the product is sold or transferred, the change of ownership must be notified to KME as soon as possible as described below.
The same terms and conditions apply to the new owner but note that the warranty expires in all cases after the specific period shown on page 3 from the date of sale to the original purchaser.
SERVICE REQUIREMENTS - Refer to your owner’s manual for details of the service schedule and routine maintenance.
SERVICING REQUIREMENTS
TRAVELLING ABROAD - If you are planning to travel to other countries on or with your machine, we ask you to note the following points.
Bimota products perform best with regular maintenance and servicing and each model has a maintenance schedule designed to keep it operating at its optimum performance level.
a) Ensure the service schedule is up to date. You may need to get your next service carried out early depending on the length and duration of your trip.
b) Take out suitable travel insurance and breakdown cover.
c) Take your warranty registration details and your owner’s manual with you.
d) If you do experience any problems with your machine, we strongly recommend that you contact the nearest KME authorised Bimota Dealer
We recommend the vehicle is serviced by an KME authorised Bimota Dealer in accordance with the servicing schedules detailed in your owner’s manual. Please ensure your KME authorised Bimota Dealer records the details whenever a service is carried out and updates the service history. We suggest you keep copies of any service documents or repair invoices.
e) You can contact the local Bimota distributor, if necessary, by visiting www.bimota.it and searching for the relevant distributor.
BIMOTA GENUINE ACCESSORIES AND SPARE PARTS WARRANTY
Your responsibility: Any maintenance schedule would be incomplete without your own active participation in making the daily inspection as detailed in the owner’s manual. Regular cleaning is also essential, and should be undertaken as often as necessary, especially in winter, to help prevent damage or corrosion caused by road salt or other harmful deposits.
KME warrants each new part or accessory to be free of manufacturing defects for the period shown below from the original date of sale by an KME authorised Bimota Dealer.
Note that damage to paint work, plated materials, or chrome due to external influences such as accident damage, climatic, thermal, chemical, industrial pollution, or insufficient care or protection from elements is excluded from the warranty.
GENUINE ACCESSORIES AND SPARE PARTS WARRANTY PERIODS
KME authorised Bimota dealers are equipped with special tooling, manuals, and service information, and have Bimota trained service staff. We back this up with a technical support and parts supply service to further enhance the quality of service.
TERMS AND CONDITIONS - ACCESSORIES AND SPARE PARTS
Pre-delivery inspection: Your service history begins with the preparation and inspection of the product prior to delivery. Your new machine has been carefully checked and prepared by your KME authorised Bimota Dealer in accordance with the pre-delivery inspection (PDI) schedule issued by Bimota. Please ensure you check that the product is delivered to your satisfaction and that the PDI record is correctly completed and signed, and that the KME authorised Bimota Dealer has recorded it in the service history and passed a copy of the PDI checklist to you.
The warranty terms and conditions are the same as those specified in this booklet for Bimota products. Please refer to them noting that the following exclusions apply.
The first service: It is essential to have this service carried out by your KME authorised Bimota Dealer at the scheduled time.
Regular servicing: Regular servicing is the key to keeping your product operating correctly and should be entrusted to your KME authorised Bimota Dealer. The service schedule in your owner’s manual tells you when, and which service is required, and details the work to be carried out.
a. This warranty does not cover repair or replacement required because of: i. accident, ii. misuse or neglect, iii. lack of reasonable and proper maintenance, iv. incorrect installation or assembly, v. repairs improperly performed, or replacements improperly installed, vi. use of parts or accessories not conforming to Bimota's specifications, vii. modifications not recommended or approved in writing by Bimota, and/or viii. normal wear and deterioration caused by using the Bimota part or accessory.
b. The following are specifically excluded from the terms and provisions of this warranty:
i. Any Bimota part or accessory used on a product designed for or engaged in competitive racing.
ii. Any Bimota part installed or used on another manufacturer’s product.
iii. Any Bimota accessory modified for use or installed on a model for which it is not designed or recommended.
iv. Any Bimota accessory modified for use on another manufacturer’s product.
v. Labour costs for fitting replacement parts under this warranty unless the original warranted part or accessory was fitted by a KME authorised Bimota Dealer.