This page has been left blank intentionally.
Cleanstar / XPOWER is Australia’s leading brand and wholesale distributor of Cleaning Equipment and Floor Care Products including Commercial and Domestic Vacuum Cleaners, Vacuum Bags, Filters, Spare Parts, Accessories, General Cleaning, Restoration and Remediation Equipment, Sanitary and Hygiene Supplies. Proudly Australian, family owned and operated, our dedicated team comprises over 100 years of combined experience servicing the
and rely on.
DISCLAIMER: Please note some products in this catalogue are not regular stock items and may be considered a special order. As such, additional freight charges may apply. Products may change or vary sometimes due to availability, or be discontinued without notice. All brands, illustrations and images contained in this catalogue are for identification and reference purposes only. Some products are generic and non-original.
ACTIV8 BATTERY POWERED VACUUM HEAD ADAPTORS................................................................
AIR MOVERS
AIR MOVERS - MULTI DRYING KIT
AIR PURIFIERS / AIR SCRUBBERS
ATTACHMENTS
BACKPACK VACUUMS
BACKPACKS - PARTS & ACCESSORIESS
BATTERY POWERED PRODUCTS
BATTERY POWERED PRODUCTS (cont’d)
BATTERY POWERED PRODUCTS (cont’d)
BATTERY POWERED PRODUCTS (cont’d).............
BATTERY POWERED PRODUCTS (cont’d)
BATTERY POWERED PRODUCTS (cont’d)
BATTERY POWERED PRODUCTS (cont’d) BELTS
BENT END PIECES & ACCESSORIES BLOWERS
BONNIE BIO
CABLES & ACCESSORIES
CARBON BRUSHES
CARPET DRYERS
CARPET RAKE
CENTRAL VACUUMS
COBWEB BRUSH
COMPOSTABLE PRODUCTS
DUCTING FILM
CORD RESTRAINTS
DEHUMIDIFIERS
DISCONTINUED MODELS & SPARE PARTS DRYERS
DRYFT
DUCTED VACUUMS, PARTS & ACCESSORIES
DYSON FILTERS, ACCESSORIES & PARTS
EXTENSION LEADS
FACE MASKS
FLEXI LEDGE DUSTER
FLOOR MOPS
FLOOR POLISHERS
FLOOR SCRUBBERS (MIRA 40)..............................
FLOOR SCRUBBERS (DRYFT)
FLOOR TOOLS - 32mm
FLOOR TOOLS - 35mm
FLOOR TOOLS - 36mm
FLOOR TOOLS - 38mm
FLOOR TOOLS - ACTIV8
FLOOR TOOLS - ADAPTORS
FLOOR TOOLS - COMMERCIAL / HEAVY DUTY
FLOOR TOOLS - GUZZLER RANGE
FLOOR TOOLS - LOW PROFILE
FLOOR TOOLS - NECKS / ELBOWS
FLOOR TOOLS - POWERHEADS
FLOOR TOOLS - SIDEWINDER TOOLS
FLOOR TOOLS - SPECIALTY TOOLS
FLOOR TOOLS - TURBO HEADS / BRUSHES
FLOOR TOOLS - TURNOVER TOOLS
FLOOR TOOLS - WESSEL-WERK (32/35mm)
FOGGERS / SPRAYERS
GREY TOOLS & ACCESSORIES..............................
HOSES - ALL
HOSE - CUFFS & JOINERS
HOSE - COMPLETE (by Brand)
HOSE - DUCTED / KITS
HOSE - FITTINGS
HOSE - GVAC
HOSE - MACHINE & TAND ENDS
HOTEL AMENITIES
HYGIENE PRODUCTS & SUPPLIES
INTERESTING PRODUCTS
JANITORIAL PRODUCTS..........................................
LADYBUG HANDHELD SWEEPER
LEADS - ACCESSORIES, PLUGS & SOCKETS
LEADS - EXTENSION & REPAIR LEADS
LEADS - IEC & SHORT LEADS
LEADS - RUBBER
LEADS - TEST & TAG
LEADS - WITH RCD
LINT ROLLER
MACHINE ENDS
MICROFIBRE CLOTHS
MOPS - FLOOR..........................................................
MOTORS - ALL
MOTORS - SINGLE STAGE
MOTORS - TWO STAGE
MOTORSCRUBBER
ODOUR CONTROL - URINAL / TOILET
PET GROOMING PRODUCTS
POLISHERS, PADS & ACCESSORIES
POWERHEADS
POWER PLUGS & SOCKETS
REPAIR LEADS
RESIDUAL CURRENT DEVICES (RCDs)
RODS - STRAIGHT, TELESCOPIC & CURVED
SANITISERS & DISPENSERS
SMALL ATTACHMENTS - 32mm
SMALL ATTACHMENTS - 35mm
SMALL ATTACHMENTS - 36mm..............................
SMALL ATTACHMENTS - 38-50mm
SMALL ATTACHMENTS - KITS
SPRAY MOP
SQUEEGEE BLADES
STEAM PRODUCTS & ACCESSORIES
STICK VACUUMS
SWEEPERS (ACTIV8)
SWITCHES
TANK ENDS
TEST & TAGGING
VACUUM CLEANERS - BACKPACKS (AEROLITE)
VACUUM CLEANERS - BACKPACKS (CORDLESS)
VACUUM CLEANERS - BACKPACKS (HIPSTAR)
VACUUM CLEANERS - BACKPACKS (GHIBLI T1)
VACUUM CLEANERS - BACKPACKS (VBP5000)
- DRY COMMERCIAL
VACUUM CLEANERS - WET & DRY
VACUUM CLEANERS - DUCTED SYSTEMS
VACUUM CLEANERS - STICKVAC / HANDVAC
WANDS - STRAIGHT, TELESCOPIC & CURVED
WASHROOM PRODUCTS
WET & DRY VACUUM CLEANERS WIPES & DISPENSERS
HOSES & CONNECTORS
HOSE CUFFS, JOINERS & ADAPTORS
MOTORS
NOZZLES & JETS
VALVES & ACCESSORIES
WANDS - FLOOR WANDS
WANDS -
# T1v3 (with Grey Lid)
T1v3-CLR (with Clear Lid)
* COMES WITH H14 HEPA FILTER
T1v3-B (with Grey Lid)
T1v3-B-CLR (with Clear Lid)
• 1450 Watt Max. Power
• H14 HEPA Filtration
• 5 Level Filtration System
• Exhaust Deflector
• Lightweight (4.7kg)
• Quiet Operation (60 dbA)
• LID Replacement Guarantee
• Comfort Shoulder Straps
• Velcro Waist Strap
• Strong Carry Handle
• Short IEC Lead
• 18 Metre Extension Lead
• Hi-Vis Yellow Vacuum Hose
• Wessel-Werk Low Profile Floor Tool
Light Aluminium Rods
• Crevice Tool, Dusting Brush & Upholstery Tool & Tool Caddy
• 6L Cloth Filter Bag with Metal
Reinforced Ring
• Vacbag Starbag AF924S
The T1v3 Backpack is now made with 30% recycled materials.
The T1v3’s new brown box packaging is made from 70% recycled paper with the remaining 30% being responsibly sourced from Visy’s tree plantation in Tumut, NSW.
The new box is now 100% recyclable, helping to reduce the amount of waste heading to landfill.
We are using less polystyrene and single use plastics in our packaging.
CB-T1v3
Cloth Bag (Ver. 2,3)
CB-T1 Cloth Bag (Ver. 1)
T1-7 Locknut for Grommet
T1v3-12 Premium Shoulder Straps (Vers.3)
T1-15 Small Insulation Strip
T1-20 Motor
T1-23 Internal Base Plate
T1-27 Base Cover (with Exhaust Deflector)
T1-39 Triangular Sponge Filter
HYCOM-T1 Yellow Comp Hose Yellow
T1v2-1
Grey Lid (Ver.2,3)
Newer style lid has two tabs for both lid latches to clip onto.
T1-10 Lid Clip
T1v3-13 Premium Waist Strap (Vers.3)
T1-9 Pre-Motor Filter
T1-19 Motor Gasket (Fan Base)
T1-16 Large Insulation Strip
T1-4 Grommet for Power Cord
T1-24 Rectangular Noise Reduction Pad
T1-28 Machine End
T1-HEPA HEPA Filter HBCOM-T1 Complete Hose Black HOCOM-T1 Orange Safety Hose
CE1810-YL 18m Extension Lead
GH1001701 Black Elastic for Cord Restraint
DISP-T1
T1 Carboard Display Stand
T1v3-SVKIT
T1-HANDLE Carry Handle
GH2508833 Rivet for T1v2
T1 Backpack Service Kit - Includes:
• Replacement Motor
• Synthetic Dust Bags (6-pk)
• Cloth Filter Bag
• Complete Hose Assembly
• Shoulder Straps
• Waist Strap
T1v3-1C
Clear Lid (Ver.2,3)
Newer style lid has two tabs for both lid latches to clip onto.
T1-1
Grey Lid (Ver.1)
Older style lid only has one tab for the lid latch to clip onto.
T1-11 Body
T1-14 Switch
T1-21 Motor Gasket (Top)
T1-22
Semi-Circular Noise Reduction Pad
T1-25 Exhaust Filter
T1-38 32mm Aluminium Rod
AF924S, AF924S-10, AF924S-100 Synthetic Dust Bag
T1v3-IECREP IEC Power Socket
GH2506175 Powerhead Socket
T1-LEAD
Short Lead (80cm - Vers. 1)
T1-LEADv2 Short Lead (38cm - Vers. 2)
T1v3-IEC
Short IEC Lead - Yellow (used with CE1810-YL)
T1v3-IEC-OR
Short IEC Lead - Orange (used with CE1810-YL)
• 1400 watt power
• HEPA filtration
• Lightweight 4.3kg
• Dual mode: vacuum & blower function
• Clear lid • Suits left & right hand users
• Long 15m power cable with cord restraint
• Comfortable harness assembly
• Low profile floor tool
• Cloth filter bag and dust bag
• Suits light commercial cleaning
* Uses 35mm tools and accessories
VBP1400
VBP1400-B
VBP1400-BL
VBP1400-BR BURGUNDY
Scan here to see it in action on YouTube!
PARTS
VBP1400-1C Clear Lid
VBP1400-5 Dust Bag Holder
VBP1400-12 Motor
VBP1400-2 Inlet Tube
VBP1400-7 Cloth Filter Bag
VBP1400-13 Motor Bumper
VBP1400-18 Exhaust Filter Cover
VBP1400-28 Carry Handle
VBP1400-33-SHLD Shoulder Straps
Cord Restraint
VBP1400-19 Exhaust Filter
AEROLITE VBP1400 & AEROLITE FLASH VBP-BATT30 BACKPACKS Uses 35mm Tools & Accessories
RTC035 Telescopic Chrome Rod
VBP1400-8 HEPA Filter
VBP1400-15 Machine Base & Screws
VBP1400-20/21 Locker for Exhaust Filter
VBP1400-4 Complete Hose
VBP1400-11 Motor Gasket
VBP1400-17 Blower Adaptor
VBP1400-25 Switch
VBP1400-29 Strain Relief
VBP1400-31 Back Plate
VBP1400-33-WAIST Waist Pad
VBP1400-BLOW Blower Accessories
VBP1400-CLIP Lid Latch for Top Cover
AF500S Synthetic Bags
•
VBP5000-18 Motor Seal Ring
VBP5000-27 Back Frame (Full)
VBP5000-31 Complete Lid
VBP5000-34 Switch
VBP5000-45 Base/Lower Body Barrel
VBP5000-47 Exhaust Filter
VBP5000-29 Strap Assembly (Full)
VBP5000-1 Exhaust Filter Cover
VBP5000-6 Lid & Base Clip Complete
VBP5000-13 Motor Press Blcok
VBP5000-15 Board Assembly
VBP5000-16 Motor Pad - Rear
VBP5000-17 Motor
VBP5000-30 Cloth Filter Bag
VBP5000-39 Sheath/Grommet for Power Cord
VBP5000-42 Silencer Felt for Lower Barrel
AF937S Synthetic Dust Bags (6-pack)
VBP5000-HBCOM Complete Hose Assembly
HIP VAC Uses 35mm Tools & Accessories
Exhaust Filter
Exhaust Filter Cover
Waist Straps
Complete Hose
Inlet Sponge Filter
AF941S Dust Bags
Exhaust Filter Sponge
• 36V cordless backpack vacuum
• 4 rechargeable lithium-ion batteries (only 2 required for operation)
• 2-speeds (Power & Eco modes)
• Running time: Up to 70mins (Eco) / 40mins (Power)
• Light weight (only 5kg with batteries)
• Compact design
• 4-stage filtration with H13 HEPA filter
• Comfortable harness assembly
• Tools and accessories
• Suitable for right & left hand users
• Carry handle for easy transport
• Ideal for commercial cleaning
2 x sets of RECHARGEABLE LI-ION BATTERIES Continue vacuuming while you recharge Colour box packaging displaying main features and inclusions.
VPROSTAR - SPARE PARTS
AF950S Synthetic Dust Bags (5pk)
VPROSTAR-B-1 Pre-Motor Filter
VPROSTAR-HEPA HEPA Exhaust Filter
VPROSTAR-CB Cloth Filter Bag
VPROSTAR-HBCOM Complete Hose Assembly
VPROSTAR-A-1 Round Clip for Lid
VPROSTAR-LID Complete Lid
VPROSTAR-B-3 Motor Cover
VPROSTAR-C-2 Motor Side Cover
VPROSTAR-C-12 Spring for Exhaust Cover
VPROSTAR-CLIP Clip (Complete) for Lid
VPROSTAR-BATT Battery Pack (x2)
VPROSTAR-C-3 Vacuum Motor
VPROSTAR-C-13 Lock for Exhaust Cover
VPROSTAR-D-1 Switch Cord
VPROSTAR-E-1 Back Support Frame with Harness Straps
VPROSTAR-D-2 Display Board for Switch Assembly
VPROSTAR-B-2 Seal for Body
VPROSTAR-C-1 Motor Gasket
VPROSTAR-C-11 Exhaust Cover
VPROSTAR-C-15 Main Board
VPROSTAR-PSA Power Switch Assembly
VPROSTAR-E-2 Screw for Back Support
VPROSTAR-CHARG Battery Charger with Cord
Features:
• 1300 Watt Power
• 11L Tank Capacity
• 10 Metre Power Lead
• Front Castor Wheels
• Heavy Duty Rubber Rear Wheels
• 55 L p/sec Airflow Rate
• Lightweight - only 8.7kg
• Quiet - only 60dbA
• Accessories Holder
Comes with:
• 2.5 Metre Vacuum Hose
• 2 x Suction Tubes
• Hard Floor Brush
• Squeegee Floor Tool
• Dusting Brush
• Crevice Tool
• Upholstery Tool
• Cloth Filter Bag
Optional (sold seperately):
#1 T1-14 On/Off Switch
#2 GH6615204 Top Handle
#4 GH6613310 Top Cover
#13 GH6613104 Top Cover Internal Ring
#15 GH2502511 Top Motor Gasket
#16 GH2502513 Middle Motor Gasket
#17 GH2505327 Motor
#18 GH2502516 Bottom Motor Gasket
#19 GH3000129 Exhaust Filter
#20 GH2207750 Exhaust Filter Grill
#23 GH3005008 Motor Wiring
#26 GH2502000 Power Cord Grommet
#29 GH3000128 Motor Fireflex
#30 GH3000130 Poly Motor Fireflex
#31 GH6004104 Motor Base
#32 GH2502400 Motor Base Seal
#33 GH2000085 Floater Cage # GH2512747 H14 HEPA Filter (Optional)
GH2512747 H14 HEPA Filter
GH3000129 Exhaust Filter
GH6656000 or CB15/30 Cloth Filter Bag
GH2505327 Bypass Motor
GH6010650 Complete Hose Assembly
AF193S Synthetic Dust Bags (5-pack)
DBR036 Dusting Brush CT036 Crevice Tool
GH2511500 Vacuum Rod
#36 GH6656000 Cloth Filter Bag (Original)
#36 CB15/30 Cloth Filter Bag (Generic)
#37 GH2207090 Tank
#39 GH6100019 Tank Clip
#41 GH2508591 Screw
#47 GH2502552 Machine End Tank Seal
#48 GH6613024 Tank Base
#49 GH2510151 Front Wheel (each)
#52 GH2510048 Rear Wheel
#53 GH2510034 Lock for Rear Wheel
#54 GH2510049 Rear Wheel Cover
#60 GH2511408 Hose Machine End
#61 GH6010650 Complete Vacuum Hose Assembly
#62 DBR036 Dusting Brush
#63 CT036 Crevice Tool
#65 GH2511500 Vacuum Rod
#66 GH6000206 Tank End Complete
#73 GH6962202 Storage Clip from Rod
#74 AF193S Synthetic Dust Bags 5pk
Features:
• 1200 Watt Power
• 35L Tank Capacity
• Powerful Pump
- 48 watt
- 5 bar spray pressure
- 0.65L/min spray rate
• Seperated Pump Control
• Upholstery Spray Nozzle
• 3.5m Solution Hose
• 10 Metre Lead
• 12L Removable Solution Tank
• Heavy Duty Rubber Rear Wheels
• 58 Litres Per Second Airflow Rate
• Light - only 17kg
• Quiet - only 62dbA
Comes with:
• 3 Metre Vacuum Hose
• 2 x Suction Tubes
• Hard Floor Brush
• Squeegee Floor Tool
• Upholstery Tool
• Hand Spray Tool
• Dusting Brush
• Crevice Tool
• Solution Hose
AF1086S Synthetic Dust Bags Optional (sold seperately):
Machine & Vacuum Tools with Extraction
Upholstery Tool
1-Jet Floor Wand Model:
Machine & Vacuum Tools with Extraction
Upholstery Tool & S/Steel
GH2505327 Bypass Motor
AF1086S Synthetic Dust Bags (5-pack)
FULL SPARE PARTS & ACCESSORIES
#1 T1-14 On/Off Switch
#2 GH2506269 Pump On/Off Switch
#3 GH6687204 Handle
#14 GH2506003 Pump
#20 GH2519155 Chemical Hose Female Connector
#21 GH6618104 Top Cover Internal Housing Ring
#22 GH2502511 Top Motor Gasket
#23 GH2502513 Mid Motor Gasket
#24 GH2505327 Motor
#25 GH2502516 Bottom Motor Gasket
#27 GH3000129 Exhaust Filter
#29 GH2207750 Exhaust Grill
#33 GH3005008 Motor Wiring
#37 GH3000128 Motor Firelfex
#38 GH3000130 Poly Motor Fireflex
#39 GH6004134 Motor Base
#40 GH2502405 Motor Base Seal
#41 GH6101100 Float
#42 GH2000090 Cage
#45 GH6100019 Tank Clip
#49 GH3470010 Water Reservoir
#56 GH2502552 Machine End Tank Seal
#57 GH3447000 Tank
#58 GH6000203 Tank End Set
#59 GH6632024 Tank Base
GH3000129 Exhaust Filter
DBR036 Dusting Brush
GH7180085 Complete Upholstery Tool
GH6470030 Complete Solution Hose
GH6730000 Cloth Filter Bag
CT036 Crevice Tool
GH6010650 Complete Vacuum Hose Assembly GH2511500 Vacuum Rod
#60 GH2510159 Front Swivel Wheel
#63 GH2510052 Rear Wheel
#64 GH2510053 Rear Wheel Cover
#65 GH2510033 Lock for Rear Wheel
#72 GH2508833 Rivet
#76 GH2504886 Tank Bracket
#77 GH2504275 Handle for Trolley
#78 GH6493119 Water Tank Hose
#82 GH3000231 Rubber Seals (10pk)
#85 GH2601087 Male Coupling Upholstery Tool
#87 GH7180085 Complete Upholstery Tool
#88 GH6470030 Complete Solution Hose
#94 GH2601049 Male Coupler Black Solution Hose
#96 GH2512550 Clip Male Coupler
#97 GH2601048 Female Quick Connect Blk Solution Hose
#101 GH6470000 Top Cover & Fireflex
#105 GH2000095 Bag Support
#107 GH6010340 Complete Drain Hose Set
#111 DBR036 Dusting Brush
#112 CT036 Crevice Tool
#115 GH2511500 Vacuum Rod
#114 GH6010650 Complete Vacuum Hose Assembly
#119 GH6730000 Cloth Filter Bag
#120 AF1086S Synthetic Dust Bags 5pk
# V-M9P-WAND 1-Jet Classic Wand
Features:
• 1400 Watt Power
• 35L Tank Capacity
• 10 Metre Power Lead
• Front Castor Wheels
• Heavy Duty Rubber Rear Wheels
• 58 L p/sec Airflow Rate
• Lightweight - only 12.5kg
• Quiet - only 62dbA
• Accessories Holder
Comes with:
• 2.5 Metre Vacuum Hose
• ‘S’ Wand
• Hard Floor Brush
• Squeegee Floor Tool
• Dusting Brush
• Crevice Tool
• Cloth Filter Bag
Optional (sold seperately):
# GH2512748 H14 HEPA Filter
AF1086S Synthetic Dust Bags
AS9P with Outrigger Attachment
CSW040U S Wand (Upper tube)
CSW040L S Wand (Lower tube)
ACCESSORIES
#1 T1-14 On/Off Switch
#2 GH6615204 Top Handle
#4 GH6613310 Top Cover
#13 GH6613104 Top Cover Internal Ring
#15 GH2502511 Top Motor Gasket
#16 GH2502513 Middle Motor Gasket
#17 GH2505329 Motor Bypass
#18 GH2502516 Bottom Motor Gasket
#19 GH3000129 Exhaust Filter
#20 GH2207750 Exhaust Filter Grill
#23 GH3005008 Motor Wiring
#26 GH2502000 Power Cord Grommet
#29 GH3000128 Motor Fireflex
#30 GH3000130 Poly Motor Fireflex
#31 GH6004134 Motor Base
#32 GH2502405 Motor Base Seal
#33 GH6101100 Float
#34 GH2000090 Cage
#36 GH6730000 Cloth Filter Bag
#37 GH2206810 Tank
#39 GH6100019 Tank Clip
# GH2512748 H14 HEPA Filter (Optional)
SPARE PARTS
GH2512748 H14 HEPA Filter
GH3000129 Exhaust Filter
GH6730000 Cloth Filter Bag
DBB040 Dusting Brush
FTC140D Dry Hard Floor Brush
GH2505329 Bypass Motor
GH6010500 Complete Hose Assembly
AF1086S Synthetic Dust Bags (5-pack)
GH2511610 or CT040 Crevice Tool
FTC140W Wet Squeegee Floor Tool
#41 GH2508591 Screw
#47 GH2502552 Machine End Tank Seal
#48 GH6613024 Tank Base
#49 GH2510159 Front Swivel Wheel
#52 GH2510052 Rear Wheel
#53 GH2510033 Lock for Rear Wheel
#54 GH2510053 Rear Wheel Cover
#56 GH6962202 Storage Clip for Rod
#60 GH2511408 Hose Machine End
#61 GH6010500 Complete Vacuum Hose Assembly
#62 DBB040 Dusting Brush
#63 GH2511610 Crevice Tool
#63 CT040 Crevice Tool
#65 CSW040U S Wand (Upper tube)
#65 CSW040L S Wand (Lower tube)
#66 GH2000095 Bag Support
#67 GH2502255 Squeegee Strip (each)
#68 GH2504275 Handle for Trolley
#69 GH2508833 Rivet
#72 GH6000203 Tank End Complete
#76 FTC140D Dry Hard Floor Brush
#77 FTC140W Wet Squeegee Floor Tool # AF1086S Synthetic Dust Bags 5pk
Features:
• 2400 Watt Power (Twin Motor)
• 56L Tank Capacity
• 10 Metre Power Lead
• Front Castor Wheels
• Heavy Duty Rubber Rear Wheels
• 115 L p/sec Airflow Rate
• Lightweight - only 19kg
• Quiet - only 62dbA
• Container with Tilting System mounted on Driving Frame
Comes with:
• 2.5 Metre Vacuum Hose
• ‘S’ Wand
• Hard Floor Brush
• Squeegee Floor Tool
• Dusting Brush
• Crevice Tool
• Cloth Filter Bag
Optional (sold seperately):
# GH2512744 H14 HEPA Filter
# AF1086S Synthetic Dust Bags
Model:
Model:
AS12P-CBN with Outrigger Attachment
GH2512744 H14 HEPA Filter
GH3000105 Exhaust Filter
GH6830000 Cloth Filter Bag
DBB040 Dusting Brush
GH2505327 Bypass Motor
GH6010500 Complete Hose Assembly
AF1086S Synthetic Dust Bags (5-pack)
GH2511610 or CT040 Crevice Tool
CSW040U S Wand (Upper tube)
CSW040L S Wand (Lower tube)
FTC140D Dry Hard Floor Brush
FTC140W Wet Squeegee Floor Tool Sold Individually
FULL SPARE PARTS & ACCESSORIES
#1 T1-14 On/Off Switch
#2
#3
#7
#8
#10
#12
#21
#22
#23
#24
#25
#26
#27
GH3005038 Motor Wiring
GH2200920 Top Handle
GH2502000 Power Cord Grommet
GH6480310 Top Cover & Fireflex
GH2508591 Screw
GH3000106 Motor Fireflex
GH2200970 Seperator
GH3000088 Top Motor Seal
GH2502511 Top Motor Gasket
GH3000012 Poly Motor Ring
GH2505327 Motor
GH2502516 Bottom Motor Gasket
GH2502410 Motor Base Seal
#28 GH2200930 Motor Base Seal
#29
#30
#31
#32
#33
#34
GH3000101 Motor Fireflex
GH3000102 Poly Motor Fireflex
GH2201362 Valve
GH3000105 Exhaust Filter
GH2200940 Exhaust Grill
GH2502552 Machine End Tank Seal
#43 GH6000203 Tank End Set
#45
GH6101106 Float # GH2512744 H14 HEPA Filter (Optional)
#46 GH2000090 Cage #47 GH2000095 Bag Support #48 GH2200960 Conveyor
#49 GH6830000 Cloth Filter Bag
#51 GH6100005 Tank Clip
#55 GH2207032 Tank #58 GH2504270 Handle for Trolley
#60 GH855000250 Cap
#61 GH2510018 Rear Wheel #66 GH2207604 Tank Base
#67 GH2510091 Castor Wheel
#68 CSW040U S Wand (Upper tube)
#68 CSW040L S Wand (Lower tube)
#71 GH2511408 Hose Machine End
#72 GH6010500 Complete Vacuum Hose Assembly #73 FTC140W Wet Squeegee Floor Tool
#74 GH2502255 Squeegee Strip (each) #75 FTC140D Dry Hard Floor Brush
#77 GH2511610 Crevice Tool
#77 CT040 Crevice Tool
#78 DBB040 Dusting Brush
#79 GH3000013 Conveyor Belt
#80 GH2207198 Swivel Connector # AF1086S Synthetic Dust Bags 5pk # SILK-L Large Silk Filter Gown
Model VC15L Stainless Steel Tank
Tank Capacity 15 Litres
Voltage 220-240V
Power 1000W, single-phase
Function Dust & water vacuuming
Air Flow Rate 48 L/s
Vacuum Suction 210 mbar
Tank Diameter 345mm
Height 580mm
Accessories 36mm
Power Cord 7 metres
VC15L - PARTS BREAKDOWN
HBCOM-36 Complete Hose
BPB036 Bent End Piece
ME15 Machine End
M031 Motor
RCS036 Chrome Rod
CT036 Crevice Tool
DBR036 Dusting Brush
CB15/30 Cloth Bag
FTB136 Combination Floor Tool
SILK-M Silk Filter Gown
FTEC136-1 Commercial Wet & Dry Floor Tool (40cm wide)
FTEA136 Commercial Wet & Dry Floor Tool (45cm wide)
VC15L-3 Top Cover Soundproof Cotton
VC15L-12 Top Cover Soundproof
VC15L-18 Dust Screening
VC15L-21 Floating Ball
VC15L-29 Tank Base
AF1011 Paper Dust Bags (5pk)
VC15L-13 Perisphere Soundproof
VC15L-19 Motor Base
VC15L-1 Handle
VC15L-14 Motor Soundproof
VC15L-2 Top Cover
VC15L-22 Cage Float Ball Rack
VC15L-29F Front Castor Wheel
CR2010-3 20m Repair Lead
CR1510 15m Repair Lead (10amp - 3core)
VC15L-24 Tank Clips
VC15L-29R Rear Wheel
MG000 Motor Gasket
VC15L-11 Switch
VC15L-15 Motor Cover
VC15L-20 Base Frame Seal Ring
VC15L-25 Tank
VC15L-9 Perisphere
VC30L-26 Square Connector Gasket Seal
VC30L-27 Square Connector Tank
Model VC30L Stainless Steel Tank
Tank Capacity 30 Litres
Voltage 220-240V
Power 1000W, single-phase
Function Dust & water vacuuming
Air Flow Rate 53 L/s
Vacuum Suction 230 mbar
Tank Diameter 345mm
Height 780mm
Accessories 38/40mm
Power Cord 7 metres
HBCOM-40 Complete Hose
CUFF38C Hose Cuff
CSW040U - S Wand (Upper)
CSW040L - S Wand (Lower) Sold Individually
FTC140W-INSERT Replacement Pair Squeegee Strips
SILK-M Silk Filter Gown
VC15L-12 Top Cover Soundproof
VC15L-18 Dust Screening
VC15L-21 Floating Ball
VC15L-29 Tank Base
VC30L-26 Square Connector Gasket Seal
FTC140D Brush/Dry Floor Tool
FTC140D-WLS Brush/Dry Floor Tool w/ Wheels
CT040 Crevice Tool
ME30/60 Machine End
FTC140W Squeegee Floor Tool
AF1086S Synthetic Dust Bags
VC15L-13 Perisphere Soundproof
DBB040 Dusting Brush
VC15L-1 Handle
VC15L-14 Motor Soundproof
VC15L-19 Motor Base
VC15L-2 Top Cover
VC15L-22 Cage Float Ball Rack
VC15L-24 Tank Clips
VC15L-29F Front Castor Wheel
VC15L-29R Rear Wheel
M031 Motor
MG000 Motor Gasket
CB15/30 Cloth Bag
VC15L-11 Switch
VC15L-15 Motor Cover
VC15L-3 Top Cover Soundproof Cotton
VC30L-25 Tank
VC15L-9 Perisphere
VC30L-27 Square Connector Tank
VC15L-20 Base Frame Seal Ring
CR2010-3 20m Repair Lead
CR1510 15m Repair Lead (10amp - 3core)
Model
Tank Capacity 60 Litres
Voltage 220-240V
Power 2000W, single-phase
Function Dust & water vacuuming
Air Flow Rate 106 L/s
Vacuum Suction 250 mbar
Tank Diameter 440mm Height 970mm
Accessories 38/40mm
Power Cord 8 metres
VC60L - PARTS BREAKDOWN
HBCOM-40 Complete Hose
CUFF38C Hose Cuff
CSW040U - S Wand (Upper)
CSW040L - S Wand (Lower) Sold Individually
FTC140W-INSERT Replacement Pair Squeegee Strips
SILK-L Silk Filter Gown
VC60L-1 Top Handle
ME30/60 Machine End
CT040 Crevice Tool
AF1086S Synthetic Dust Bag
VC60L-19 Motor Base
VC60L-32 Front Castor Wheel
VC30L-27 Square Connector Tank
FTC140D Brush/Dry Floor Tool
FTC140D-WLS Brush/Dry Floor Tool w/ Wheels
VC60L-10 Switch Plateolder style (2 motor)
VC60/90L-10 Switch Platenewer style (2 motor)
VC60L-2 Top Coverolder style (2 motor)
VC60/90L-LID Top Covernewer style (2 motor)
VC60L-9 Perisphere
VC90LP-17 Dust Screening (2 piece)
M031 Motor
FTC140W Squeegee Floor Tool
VC60L-22 Floating Ball
VC60L-23 Floating Rack
DBB040 Dusting Brush
CB60 Cloth Bag
VC60L-28 Tank
VC15L-24 Tank Clips
VC15L-11 Switch
VC60L-14 Fixed Motor Cover
VC60L-18 3 Leg Cover
VC60L-29 Tank Handle
VC60L-30 Base
VC60L-20 Motor Base Frame
VC60L-HINGE Plastic Hinge
VC90LP-13 Motor Soundproof Cotton
VC60L-31 Rear Wheel
Photo coming soon!
VC60L-31-CLIP Clip for Rear Wheel
VC30L-26 Square Connector Gasket Seal
VC90LP-15 Motor Gasket
VC90LP-21 Base Frame Sealing Ring
Photo coming soon!
VC60LTROLLEY Assembled Trolley
VC60L-AXLE Back Wheel Axle
VC60L-BRACKET Axle Bracket (2pc)
CR2010-3 20m Repair Lead
CR1510 15m Repair Lead (10amp - 3core)
SPECIFICATIONS
Model
Tank
Voltage
Power 2000W, single-phase
Function Dust & water vacuuming
Air Flow Rate 120/159 L/s
Vacuum Suction 250/270 mbar
Tank Diameter 440mm
Accessories
HBCOM-40 Complete Hose
CUFF38C Hose Cuff
ME30/60 Machine End
CSW040U - S Wand (Upper)
CSW040L - S Wand (Lower) Sold Individually
FTC140W-INSERT Replacement Pair Squeegee Strips
CT040 Crevice Tool
FTC140D Brush/Dry Floor Tool
FTC140D-WLS Brush/Dry Floor Tool w/ Wheels
SILK-L Silk Filter Gown
VC60L-1 Top Lid Handle
VC60L-19 Motor Base
VC60L-23 Floating Rack
VC90LP-HOSECLIP Hose Clip
VC90LP-PLUG Plug for Dump Hose
VC90LP-BRACKET Wheel Axle Bracket
VC90LP-HB Bracket for Handle
DBB040 Dusting Brush
AF1086S Synthetic Dust Bag
VC60L-10 Switch Plateolder style (2 motor)
VC60/90L-10 Switch Platenewer style (2 motor)
VC60L-2 Top Coverolder style (2 motor)
VC60/90L-LID Top Covernewer style (2/3 motor)
VC90LP-30 Rear Wheel
VC15L-24 Tank Clips
VC60L-14 Fixed Motor Cover
Photo coming soon!
VC90LP-DUMP Dump Hose
VC90LP-17 Dust Screening (2 piece)
VC90LP-13 Motor Soundproof Cotton
VC90LP-3M-10 Switch Plate (3 motor)
VC90LP-29 Handle
VC90LP-3 Top Cover Soundproof Cotton (Upper)
VC90LP-31(NEW) Front Castor Wheel (new style) comes with screws, washers and rubber seal
VC90LP-31S Screws for Castor Wheel (4pc)
VC90LP-16 BBH5 Screws (8 pieces)
VC90LP-21 Base Frame Sealing Ring
CR2010-3 20m Repair Lead CR1510 15m Repair Lead (10amp - 3core)
M031 Motor CB60 Cloth Bag
VC90LP-12 Top Cover Soundproof Cotton (Lower)
FTC140W Squeegee Floor Tool
VC15L-11 Switch
VC60L-18 3 Leg Cover
VC60L-9 Perisphere
VC30L-26 Square Connector Gasket Seal
VC30L-27 Square Connector Tank
VC90LPAXLECAP Axle Cap
VC90LP-28 BodyTank
VC90LP-3M-LEAD Repair Lead
VC90LP-15 Motor Gasket
VC90LP-34 Bracket for Handle (w/ hole)
VC60L-20 Motor Base Frame
VC60L-22 Floating Ball
VC90LP-3M-12 Top Cover Soundproof Cotton (3 motor)
VC90LP-3M-13 Motor Soundproof Cotton (3 motor)
VC90LP-3M-14 Fixed Motor Cover (3 motor)
VC90LP-3M-17 Dust Screening Cotton (2pk) (3 motor)
VC90LP-3M-19 Motor Fixing Base (3 motor)
VC90LP-3M-20 Motor Base Frame (3 motor)
VC90LP-AXLE Back Wheel Axle
• 80 Litre Capacity Extractor
• Wet and Dry Vacuum
• Stainless Steel Tank
• Twin Motor (2000 Watt)
• Comes with Stainless Steel Extraction wand (250mm head width)
• Upholstery Tool (85mm head width)
• Dump Valve, drainage hose
• 20 Litre solution tank
• 2.5 Metre long hose
VC80LX-1 Large Handle
VC80LX-12 Switch Red
VC80LX-16 Main Pump
VC80LX-SOL Solution Hose
M031 Bypass Motor
VC80LX-UPHOL Upholstery Tool
Sold Individually
CSW040U S Wand (Upper tube)
AF1086S Synthetic Dust Bags (5-pack)
VC80LX-HOSE or HBCOM-40 Vacuum Hose
CSW040L S Wand (Lower tube)
FTC140D Dry Hard Floor Brush FTC140W Wet Squeegee Floor Tool
VC80LX-13 Quick Connector (on lid) Solution Hose
VC80LX-16 Main Pump
VC80LX-20191816 33cm Solution Hose for Trigger w/ ends
VC80LX-33 Sponge
VC80LX-37 Floating Ball
VC80LX-38 Windshield
VC80LX-39 Dust Isolator Support
VC80LX-42 Outlet Fork
VC80LX-43 Dirty Water Hose
VC80LX-4567 Solution Hose Connector Set
VC80LX-47 Silicone Pipe Connector
VC80LX-48 Brass Connector
VC80LX-49 Water Tank
VC80LX-58
VC80LX-60
VC80LX-61
VC80LX-62
Large Machine Handle
Large Machine Front Wheel
Large Machine Straight Leg
Large Machine Rear Wheels
VC80LX-CONF Female Connector
VC80LX-CONM Male Connector
VC80LX-WAND Complete Floor Wand
CB60 Cloth Filter Bag
VC80LX-HOSE Complete Hose
VC80LX-OUTPUMP Outward Pump Hose
VC80LX-PUMPH Complete Pump Hose
VC80LX-SOL Complete Solution Hose / Ends 3.2m
VC80LX-TANKH Water Tank Hose
VC80LX-TRIG Trigger Assembly (Wand)
VC80LX-TROLLEY Complete Trolley
VC80LX-UPHOL Complete Upholstery Tool
VC80LX-WAND Complete Floor Wand
HBCOM-40 Vacuum Hose
M031 Vacuum Motor
AF1086S Synthetic Dust Bags 5pk
CB60 Cloth Filter Bag
10-0607 Nozzle T-Jet Brass 11002
ME30/60 Hose Machine End
VC30L-27
CSW040U
CSW040L
FTC140W
Tank End Fitting
Upper S Wand
Lower S Wand
Wet Squeegee Floor Tool
FTC140D Dry Floor Tool/Brush
• Large 10 litre capacity
• Compact design
• Quiet operation
• Lightweight
• Long 10m power cable
• Carry handle for easy transport
• Front castor wheels
• Tools & accessories
HBCOM-VC10LP * Complete Hose
VC10LP-4 Air Channel Room
VC10LP-11 Inner Wire
VC10LP-17-BP Latch Backing Plate
VC10LP-18 Rear Wheel Axle
VC10LP-22 Front Castor Wheel
VC10LP-26 Air Inlet Adaptor Cover
VC10LP-30 Motor Gasket MELUX Hose Machine End (3-Lug)
VC10LP-CF * Cloth Filter Basket (VC10LP only)
FILT-VC10LP Cloth Protection Filter
VC10LP-HEPA HEPA Filter (VC10LPH only)
VC10LP-7 * Power Switch
VC10LP-12 Sealing Ring for Barrel
VC10LP-SCREW Screws for Backing Plate
VC10LP-19 Rear Wheel
VC10LP-23 Screw Nut Cover
VC10LP-27 Fixed Switch (HEPA) (VC10LPH only)
VC10LP-31 * Motor
VC10LP-PRE * Pre-Motor Filter (VC10LP only)
AF927S Synthetic Dust Bags (VC10LPH only)
VC10LP-33 Mesh Cover for HEPA Filter (VC10LPH only)
VC10LP-10 Motor Holder
VC10LP-16 Canister
VC10LP-17 Metal Lid Clip
VC10LP-20/21 Screw Nut & Washer for Front Wheel
VC10LP-25 * Air Inlet Adaptor (VC10LPH only)
VC10LP-28 HEPA Holder (VC10LPH only)
VC10LP-32 Fixing Pad for Motor Top
CREST1 * Cord Restraint
CB927 Reusable Cloth Bag (VC10LPH only)
HEPA HOUSEMAID (VC10LPH)
Note: Standard VC10LP, AS4 model comes with Cloth Filter
• 15 Litre dry bagged machine
• 800 Watt power
• Lightweight <6kg
• Shock resistant ABS body
• Low noise - 61 db(A)
• High 50L p/sec airflow rate
• Rubber bumper protector
• Carry handle for easy transportation
* This model does not have a powerhead socket
and:
• 2-piece extension rods
• 2.5m length hose assembly
• Long 10m power cable
• Cloth filter bag
• Front castor wheels
• Optional HEPA Filter (ask us)
AF1000 or AF1000-10 Paper Dust Bags 5pk or 10pk
AF1000S
Synthetic Dust Bags
FILT-AS5
H14 HEPA Filter
GH6595000
Polyester Filter Set / Cloth Filter Bag GH3000611
Exhaust Air Filter (older models)
#2 GH6595002 Exhaust Grill
#3 GH3000611 Exhaust Filter
#4 GH2206410 Lid Motor Housing Cover Yellow
#5 GH3000610 Fireflex
#6 GH2508591 Screw
#7 GH2009210 Motor Housing / Separator
#8 GH2501924 Motor Fixation
#9 VBUT-31 Vacuum Motor (older Blue/Grey model)
#15 GH6004002 Motor Base
#19 GH3000053 Sound Baffle
#20 GH2506232 On/Off Power Switch
#21 GH3004990 Complete Socket Protective Cap
#22 GH3005010 Socket Plus Condensor
#25 GH2000005 Cloth Bag Holder
#26 GH6595000 Cloth Bag & Cage
#27 GH2508833 Rivet
#28 T1-10 Clip
#29 GH2510094 Rear Wheel (each)
#30 GH2510341 Rear Wheel Pin (each)
This model has now been discontinued
IMPORTANT NOTE:
Some parts that suit the older Blue/Grey model will not suit the newer Yellow/Grey model machine. Please contact us for confirmation.
#32 GH2510151 Front Wheel (each) #33 GH6595000 Cloth Bag & Cage #34 AF1000 Paper Dust Bags (5pk) #34 AF1000-10 Paper Dust Bags (10pk) #34 AF1000S Synthetic Dust Bags (10pk) #36 GH6000204 Complete Tank End
#37 GH2502556 Intake Gasket
#38 GH3059504 Tank (Grey)
#39 GH2004253 Bumper Band #40 HBCOM-AS5 Complete Vacuum Hose Assembly #41 HB32-1.8 Black Hose 32mm - 1.8m Long #42 BPB032 Plastic Bent End Piece
#43 ME-AS5 Hose Machine End
#44 UBP032 Upholstery Tool #45 DBB032 Dusting Brush #46 CTP032 Crevice Tool #47 RCS032 Chrome Rod (single) #49 FTW132-3 32mm Low Profile Floor Tool FILT-AS5 H14 HEPA Filter Cartridge
• 1400 Watt max. power
• 10 Litre dry vacuum cleaner
• H14 HEPA filter
• 2 Speeds
• Manual cord rewinder
• Metal body
• 29 kPa
• 15 metre power cord length
• 19 metre working range radius
• Wessel-Werk Deluxe floor tool
• Premium tools & accessories
• On-board tool storage
• Uses Starbag AF940S
• MADE IN EUROPE
MORE SPARE PARTS
VBUT-PRO-1 Cover
VBUT-PRO-3 Upper Spool
VBUT-PRO-4 Lower Spool
VBUT-PRO-7 Motor Cover
VBUT-PRO-8 Motor Gasket Shock Absorber
VBUT-31 Motor
VBUT-PRO-11 Lower Motor Cover
VBUT-PRO-13 Canister
VBUT-PRO-15 Orange Button Cap
VBUT-PRO-16 Spring for Orange Button
VBUT-PRO-17 Switch
VBUT-PRO-015 PCB Board
VBUT-PRO-21 Power Cord
VBUT-31 Motor HBCOM-BUT Complete Hose Assembly FILTH14-PRO H14 HEPA Filter AF940S Synthetic Dust Bags 5pk
VBUT-PRO-26 Rear Wheel
VBUT-PRO-38 Bush Gasket for Tank End
VBUT-PRO-72 Front Handle
VBUT-PRO-74 Front Catch
VBUT-PRO-75 Front Holder for Tank End
VBUT-PRO-76 Dust Bag Bush for Tank End
VBUT-PRO-CB Cloth Filter Bag
VBUT-PRO-CCR Complete Top with Cord Rewind
FILTH14-PRO H14 HEPA Filter
HBCOM-BUT Complete Hose Assembly
VBUT-ME Hose Machine End Connection
AF940S Synthetic Dust Bags (5pk)
BODY LARGE 10L DUST BAG CAPACITY
NOTE: Many VBUT spare parts are also suitable for the Electrolux Z950, Z951.
Park System
VBUT-32 Damping Insert
AF1082 Paper Bag AF1082S Synthetic Bag
VBUT-BUMP-OLD Rubber Bumper for base pre-2015 models
Rear Catch
FILTH14-BUT H14 HEPA Inlet Filter
CB-BUTLER Re-useable Cloth Bag (Made in Europe)
VBUT -1 Outer Plastic for Lid
VBUT-3 Cover
VBUT-5 Front Catch
VBUT-8 O-Ring
VBUT-ROD Metal Rod
VBUT-CANNISTER Blue canister only
VBUT-4 Lower Cover
Lower Foam Filter
Handle
Shock Absorber
Motor Housing Unit
Foam Insert
Wheel
Gasket
Switch
Catch Spring
HBCOM-BUT Complete Hose (3m)
CB1022 Re-useable Cloth Bag
VBUT-HANDLE Plastic Carry Handle for Lid
Bag Bush
Cord Sleeve
Switch Cover
VBUT-ME Hose Machine End
VBUT-BUMP-NEW Rubber Bumper for current model base
VBUT-HASSEMBLY Full Handle Assembly with Lid
The Craftix 35M safety vacuum cleaner is certified for the removal of ‘M’ Class hazardous dust, ensuring maximum health protection for the user whether it be on the construction site or in the workshop. Designed for use with power tools where harmful fine dust particles from wood, paint, plaster, cement, concrete and tile adhesive can accumulate, the Craftix 35M collects this dust before it pollutes the breathable air. In this way, sawing, drilling, cutting, sanding, milling and grinding work can be carried out efficiently and safely.
The H13 HEPA filter consists of two independent filter chambers which are cleaned one after the other, allowing suction power to remain at a consistently high level even during cleaning. Filter cleaning takes place automatically every 45 seconds, saving you time and money with less filter maintenance.
The suction power is monitored by a warning device with both an acoustic and LED visual signal. The user is warned if the required air flow is not reached, avoiding increased dust pollution of breathable air.
• 1200 watt motor
• Noise level: 74 LpA (dB)
• 35L tank capacity | Weight: 16kg
• Airflow: 74L p/sec | H13 HEPA Filter
• Integrated key tool for filter change
• Parking position for floor nozzle
• On-board tool storage
• Flat surface on the motor head with retractable carrying handle for mounting the optional adaptor plate for tool cases
• Foldable push bar for easy transport
• Dust-tight hose connection inlet cap for dustfree transport
• Selection switch for hose diameter
• On/Off switch for automatic filter cleaning
• Standard operation with variable suction control or automatic operation with connected power tool
• Integrated power socket for power tool use
• Lockable rear wheels
Model: VCRAFT35M
• 2-piece stainless steel rods
• 10m heavy duty power cord
• 5m anti-static vacuum hose
• 2.5m anti-static suction hose
• Extra wide floor nozzle (450mm)
• Crevice tool & dusting brush
• Power tool adaptors for use with suction devices of different diameters (21, 25, 32, 35mm)
V-N80-102031 Fleece Filter Bags (5pk)
V-WKING-109117 Motor
VCRAFT35M-102116 Antistatic Hose
VCRAFT35M-113103 Socket
VCRAFT35M-118100 H13 HEPA Filter Cartridge
VCRAFT35M-118104 Magnet Valve
VCRAFT35M-118107 Valve
VCRAFT35M-118109 Power Electronics
VCRAFT35M-118110 Power Cord 10m
VCRAFT35M-118113 Switch Set
VCRAFT35M-118122 Electro Tool Adaptor D21/25/32
VCRAFT35M-118125 Castor Wheel
VCRAFT35M-118127 Wheel Axis
VCRAFT35M-118129 Latch
VCRAFT35M-118139 Electro Tool Adaptor Antistatic
VCRAFT35M-118143 Vacuum Hose D35 with Handle
VCRAFT35M-118150 Adaptor Plate to Store Tool Cases
RCS038 Chrome Rod 38mm
CT036 Crevice Tool 36mm
ADAP-PT Power Tool Adaptor
DBB038 Dusting Brush 38mm
FTEA138 Commercial Floor Tool 38mm
VCRAFT35M-102116
VCRAFT35M-118143
VCRAFT35M-118100
V-N80-102031
VCRAFT35M-118122
V-WKING-109117
The home of DRYFTAustralia
1.
PARTS BREAKDOWN
DRYFT-005-0011
Battery core ion
DRYFT-002-0013 Suction hose
DRYFT-005-0012 Charger core ion
DRYFT-002-0006 Water release channel
DRYFT-002-S02 Oscillating assembly
DRYFT-002-S03 Squeegee bar assembly complete
DRYFT-002-S06 Pad holder assembly
DRYFT-002-S14 SPYDR ball socket kit
DRYFT-040-0004 Cleaning pad single
DRYFT-044-0031
Recovery tank inlet filter
DRYFT-045-0001
Main PCB
DRYFT-042-0001-24V 24V digital head motor
DRYFT-044-S03 Solenoid pod assembly
DRYFT-045-0006 Wiring harness (MX-4)
DRYFT-200-S01 Spin handle kit
DRYFT-200-S04
Oscillation stabiliser kit
DRYFT-200-S02 SPYDR brush kit (x4 bush)
DRYFT-200-S05 Squeegee wheel kit
DRYFT-038-S01 Suction pod
DRYFT-044-0030 6mm polyurethane tube NatWtrHo
DRYFT-044-S09
Clean water tank bucket filter
DRYFT-050-0001 Control panel
DRYFT-200-S03 Corner wheel kit (x4 wheels)
DRYFT-200-S06 Squeegee kit front & rear
DRYFT-200-S07 Clean water tank valve kit
DRYFT-200-S09 Stand frame & magnet kit
DRYFT-200-S27 Squeegee kit uneven floors Photo coming soon!
DRYFT-044-S01
Recovery tank assembly
DRYFT-044-S02
Clean water tank assembly
011-0004
011-0012
011-0017
011-0024
011-0040
011-0041
011-0054
011-0055
011-0056
Weight Kit for SHOCK
Oscillating Body Bearing for SHOCK
Jet Nozzle for SHOCK
Shock Wingnut for SHOCK
Head cable with gland 2 for SHOCK
Corner Wheel over-moulded for SHOCK
Yoke Pivot Plate for SHOCK
Battery Level Indicator Membrane for SHOCK
Oscillation Stabiliser for SHOCK
011-0070 Turf Pad for SHOCK
011-0071
011-0072-10
Microfibre Pad for SHOCK
Thinline Scrubbing pad GRN (10pk) for SHOCK
011-0073-10
011-0074
011-0075-10
011-0081
042-0001-12V
12V7A
12V7ADC
211760
Stripping Pad Maroon (10pk) for SHOCK
MAGplate Cleaning Pad Holder for SHOCK
Shock Melamine Pad (10pk) for SHOCK
Electronic Speed Controller with housing & Cable complete for SHOCK
Motor 12V Digital for SHOCK
12 Volt Battery (older version)
Before S/N: M3 (10074) & JET3 (5387) but battery without DC connector will work with ALL models
Battery with DC Connector (newer version) (Use after S/N: M3 (10074) & JET3 (5387)
Twister pad YLW - 2pk Polishing 211763
A-FIBRE-5
G-FIBRE-5
S-FIBRE-5
Twister pad WHITE - 2pk Refurbishing
A-fibre absorb 500ml - 5 pack (absorbs 500ml of water)
G-fibre Daily Clean - 5 packGlide Fibre for smooth floors
S-fibre scrub 5 pack - Scrub Fibre for extra agitation on textured floors
J1SUB2
JET3PACK
(complete)
JET3 Backpack(complete with pump & battery)
M3PACK Backpack Complete for M3 with battery
MS1020
MS1022
M/S 12V Battery Post Adaptor (use for older versions)
M/S 12V Cig. Lighter Adapt MS1038
Part No. Image Description
MF Multi purpose Pad
Black Stripping Pad 5 pk
Scrubbing Pad GRN 5 pk
Pad (5pk)
High perfom SP 10pk
Melamine Cleaning Pad (5pk)
Crystalliser pad 2 pack
Motorscrubber wall dock. Docks M3, JET3, Shock & Blade
Motorscrubber Charger-2pin (older versions)
MS3005B
MS3009B-2pin
MS3009C-3pin
MS3061
MS3070
MS3070KIT
MS4003L
Yoke Version Fits 29mm OD tube
Battery Coiled Lead with DC Connector 2 pin (older version)
Coiled Cable 2 Core 3 pin coiled cable 2 core fits backpack New 3 pin connector (newer models)
M-case Motorscrubber CARRY BAG gn3 (holds 1 machine & 4 brushes)
M-case pro case only LARGE (holds 2 machines & all accessories)
M-CASE Pro Full Kit. Contains JET3 complete, Blade, Storm wand & all accessories
Handle 125cm telescopic (LONG)
MS4003M
MS4003S
MS4005
MS7003
Red Handle 70-140cm Telescopic (MEDIUM)
Handle 38cm hand held (SHORT)
Hardware/screw packet. For D-Handle and interchanging M3 Handles
M3 Hub Dark Grey. Middle section that connects pad to M3 & JET3 MSBLADEF
Blade frame & rubber refill
MSBLADEIH
Blade fluid injection handle
MSBLADER
Blade rubber refill ONLY
MSCHARGD-3PIN
MSGREY12V
MSJ03B
Battery Charger 3-pin AUS plug - contains MSCHARGD3PIN and MSPAAUS. Suits any backpack with 3-pin connector (M3, JET3, SHOCK, STORM)
12V Motorscrubber Motorhead Complete Grey with yoke
3 core cable male quick fit (suits older versions)
MSJ04 Jet 1/4Bsp Barb Pump Inlet (for MSJ06)
MSJ06 Jet pump
MSJ09B Water/Solution bottle
MSJ10B Bottle cap
MSJ11 4mm push fit check valve
Hose end filter
Part No. Image Description
MSJ25 Red latching brush switch
MSJ26 Blue demand pump switch
MSJ29
MSJ39
MSJ42B
MSJ60
MSJ61
MSJ62
MSS02
MSS022-24REVG
MSS026
MSS301
M4 Hex Screw 10Mm For Clamp
4mm push fit to 1/8” BSPP for JET/FORCE for MSJ06
Plastic Jet PVDF For Jet Model
1ltr water pouch [90mm tab]
M-wipe waste pouch
M-wipe dispenser pouch
Backpack universal Shell only
Cable Coiled fits internal of medium handle (older versions) power connector
Circuit Breaker (for older versions)
Adaptor Cable Male Lemo to 3-pin SAE (new model) : allows older machines (with Lemo connector) to be used with the current backpack.
MSS032
MSS402D-3PIN
MSS402B-2PIN
Handle Flip Clip 32mm (telescopic connection on all models)
Switch Housing Cable Assembly 3 pin (newer models)
Switch Housing Cable Assembly 2 pin (older models)
MSS061 Locking Knobs
MSS103
Rubber Grip For All Machines32mm handle
MSS11 On-Off Switch Latching
MSS172B
MSS202
MSS221
MSS228
Grey Thumb Screw x 1 (fits head to handle)
1/4” NPT x 4mm Push Fit Connector
Battery Connector Female DC w Fuse- use with 12V7A
SAE to DC Adapter (for older 2 PIN versions) to charge additional batteries
MSS25 68 micron jet nozzle
MSSHHCA
Shock Head Cover Assembly
MSSHOCKH
MSSHOCKHH-B
MSSTORM
MST5B
S-FIBRE-5
Shock Head Only
Shock (No Backpack) Handle & Head only
Storm - wand only
Bottle carrier (hold 9 x 1Ltr bottles)
S-fibre scrub 5 pack- Scrub Fibre for extra agitation on textured floors
COMES WITH 2 BATTERIES
UP TO 8 HOURS SCRUB TIME
THE MIRA 40 OFFERS COVERAGE 3,250 SQM, WHICH IS MORE THAN DOUBLE IT'S CLOSEST COMPETITOR*
* Based on standard MIRA 40 with 2 batteries on LOW-SPEED MODE
• 2 x 36V lithium batteries (13AH)
• One battery required for operation
• BONUS battery included to increase working time
• Battery charger included
• Up to 1500 recharge cycles each
• 410mm working width
• Up to 90 mins. working time per battery at max. function
• Up to 4 hour run time per battery when polishing on low speed
• Up to 4 hours recharge time
• 3-speed brush: 145-175-220rpm
• 3L clear water tank
• 5L dirty water recovery tank
• Float system in recovery tank (with auto cut-off)
• Heavy duty stainless steel frame
• 36V two-stage 8-speed vacuum suction motor
• Single multi-function digital control panel
• Usage Timer/Counter
• Eco energy saving function
• Battery level indicator
• Reversible squeegee blades (4 edges)
• Water consumption 3 Litres
15 mins @ MAX 100%
30 mins @ 50% Eco mode
• Uses water or low foam detergent
• SUITABLE FOR HARD FLOOR SURFACES
• Quick Reference User Guide included in box
NEW FEATURES:
• Now comes with auto shut off float system, when recovery tank is full
• Improved handle support
• Improved squeegee locking system
• New adjustable rear squeegee wheel
• Long lasting aluminium drive bush
• Recovery tank sealing gasket upgraded to silicone
• Improved wiring in motor
RANGE OF BRUSHES & PADS AVAILABLE (SOLD SEPERATELY)
360˚ CONTROLLED INCLINATION STABLE IN VERTICAL POSITION
NATIONWIDE SERVICE NETWORK & PARTS BACKUP
Main HEPA Filter (Vac Flow) Bottom HEPA Filter (Exhaust)
THE MIRA 40 OFFERS COVERAGE OF UP TO 3,250 SQM, WHICH IS MORE THAN DOUBLE IT'S CLOSEST COMPETITOR*
* Based on standard MIRA 40 with 2 batteries on LOW-SPEED MODE UP TO 8 HOURS SCRUB TIME COMES WITH 2 BATTERIES
Dirty water is sucked up at the base of the unit via the squeegee tool and into the waste water tank. The air is then separated, and the contaminated air is captured by the HEPA Filter (vac flow) at the top-rear of the unit. The air then travels down through to the vacuum motor (base) with another level of HEPA Exhaust Filtration. This captures and filters the contaminated air, releasing clean air into the environment.
Scan the QR Code to view an animation video of the above HEPA filtration air flow
VMIRA-SPA0026 (#14)
Standard Blue Brush
General Cleaning (included with machine)
VMIRA-PAD0012
Red Pad (1pc)
Spray Shining
VMIRA-SPA0026.TX (#14)
Hard Grey Tynex Brush Heavy Duty Cleaning
VMIRA-PAD0010
White Pad (1pc) Finishing & Polishing
VMIRA-KIT0054 (#57)
Lithium Battery Kit36v
VMIRA-BOC0101 (#67)
Spacer Pivot Bush Small Back Wheel
VMIRA-TUB0018 (#94) Water Hose
VMIRA-KIT0064 (#10)
Vac Motor - 36v 2 Stage
VMIRA-SPA0026.P (#14) Soft Brown Brush Treated Surfaces, Wood & Polishing
VMIRA-PAD0011
Beige Pad (1pc) Polishing
VMIRA-SPA0026.T (#14) Pad Drive/Holder Use with pads
VMIRA-PAD0015 Brown Pad (1pc) Aggresive Clean
VMIRA-COS0098 Battery Case
VMIRA-DAD0023 (#65) Ring Nut for Small Back Wheel
VMIRA-SER0020.F (#1) Clean Water Tank
VMIRA-COS0050 Sticker for Membrane Control
VMIRA-PAD0013 Blue Pad (1pc) Light Cleaning
VMIRA-ELE0011 (#2) Battery Plug
VMIRA-ROT0029 (#79) Front Wheel D=50
VMIRA-SER0022.B (#1) Recovery Tank
VMIRA-GRP0120/R (#1) Membrane Control
VMIRA-PAD0014 Green Pad (1pc) Intermediate Cleaning
VMIRA-CRB0012 (#4) Battery Charger
VMIRA-ROT0030 (#66) Small Wheel D=30
VMIRA-MIN0021 (#6) Shaft Key
* Parts breakdown numbers referenced relate to relevant diagrams.
VMIRA-TUB0022 (#3) Vac Hose Recovery tank hose
VMIRA-ASS0135 (#5) Clean Water Cap
VMIRA-COM0069 (#4) Knob MOD 1065/F M6 1pc
VMIRA-COS0083 (#3) Solution Cap Key
VMIRA-GUA0019 Gasket Kit
VMIRA-KIT0059-X (#35) Handle Support
VMIRA-KIT0055 (#12) Front & Rear Squeegee Blade POLYURETHANE
VMIRA-TUB0023 (#2) Vacuum Suction Hose
VMIRA-CAB0037 (#4) Engine Wiring
VMIRA-COM0070 (#8) Magnet
VMIRA-ELE0184 (#10) Solenoid Valve Complete
VMIRA-ASS0134 (#13) Recovery Tank Cap
VMIRA-COM0065 (#8) Elasting Rubber Couping
VMIRA-COM0072 (#22) Hose Cap
VMIRA-FIL0017 Clear Water Filter (Old Style)
VMIRA-FIL0019 Main HEPA Vac Filter (for VMIRA-HEPA)
VMIRA-KIT0060 (#4) Tube with Curved
VMIRA-KIT0056 (#12) Front & Rear Squeegee Blade LYNATEX
VMIRA-FIL0018 (#6) Vac Filter
VMIRA-FIL0020 HEPA Exhaust Filter (for VMIRA-HEPA)
VMIRA-KIT0063 Kit Transport Wheel
VMIRA-COM0067 (#18) Knob SQG M6
VMIRA-COM0076 (#1) 3L Water Fit Bottle
VMIRA-FIL0021 Clear Water Filter (New Style)
VMIRA-INN0018 (#5) Brush Coupling O-Ring
VMIRA-KIT0057-X (#13) Squeegee Body
VMIRA-KIT0079 Hook Assembly
VMIRA-MOT0033 (#1) Left Brush Motor
VMIRA-KIT0077 (#17) Float Kit
VMIRA-KIT0089 Handle Lock
VMIRA-RAC0045 (#11) “T” Raccord
VMIRA-ROS0016 Washer 6.6 x 18 x 2
VMIRA-MIN0017 (#3) O-Ring
VMIRA-PIA0172-X (#17) Squeegee Front Metal Blade
VMIRA-ROS0031 (#51) Washer 6.6 x 12 x 1
VMIRA-MIN0018 (#7) O-Ring
VMIRA-PIA0175-X (#8) Rear Spring Blade Squeegee
VMIRA-ROT0016 (#26) Adjusting Wheel Sqg 1pc
VMIRA-MOT0032 (#2) Right Brush Motor
VMIRA-RAC0044 (#9) Nipples M-M 1/4
VMIRA-ROT0026 (#6) Squeegee Small Wheel
A truly multi-purpose machine designed to Strip, Wash, Buff, Sand, Refinish and Dry Clean your hard floor surfaces and carpets. COMES WITH:
• Strong induction motor
• 250-275 watt power (240V)
• 15” (38cm) working width
• 150rpm working speed
• Safety/kill switch start-up
• Quick release foot pedal
• Quick wire release system
• Net weight 16.3kg
OPTIONAL ACCESSORIES:
Water Tank Set Includes bottle, basket & screws
Part # PS-13-01
Designed to Polish, Strip, Wax, Buff and Refinish all hard floor surfaces including tiles, wood, vinyl, marble and more. It can also be used to dry-clean your carpets.
This hand-controlled polisher is great for use in both large and compact areas including bathrooms, toilets and cubicles.
• 250 watt power (240V)
• 13” (33cm) working width
• 150rpm working speed
• Gross weight 14.8kg
PS-001-01 13-inch
Soft Brush Suits PS-001
PS-001-1002 Motor Suits PS-001
PS-08 15-inch Microfibre Pad
Suits PS-001 & PS-015
PS-1020 Power Switch Suits PS-001
PS-001-56
Pedal Assembly Suits PS-001
PS-13-01
Water Tank Set with bottle, basket and screws Suits PS-001 & PS-015
PS-015-03 15-inch Pad Holder Suits PS-015
PS-015-109
Water Bottle Cap
Suits PS-001 & PS-015
PS-015-112 Basket
Suits PS-001 & PS-015
PS-015-7 Power Switch Suits PS-015
PS-015-86
Water Pipe
6x4x200mm
Suits PS-001 & PS-015
PS-001-02 13-inch Hard Brush Suits PS-001
PS-001-1025 Brush Holder Pad
Suits PS-001
PS-1005 Wheel Suits PS-001
PS-1037 Staring Capacitor Suits PS-001
PS-015-01 15-inch Soft Brush Suits PS-015
PS-015-05 15-inch Cotton Pad Suits PS-015
PS-015-110
Water Pipe
Connector C
Suits PS-001 & PS-015
PS-015-40
Motor
Suits PS-015
PS-015-82 Nozzle
Suits PS-001 & PS-015
PS-015-87
Water Pipe
Connector A
Suits PS-001 & PS-015
Sanding Paper - Grade #40 - PS-002-S40
Sanding Paper - Grade #60 - PS-002-S60
Sanding Paper - Grade #80 - PS-002-S80
Sanding Paper - Grade #120 - PS-002-S120
Suits PS-001 & PS-002
PS-001-03 13-inch Pad Holder Suits PS-001
PS-04 13-inch White Polisher Pad Suits PS-001
PS-1019
Handle Suits PS-001
PS-001-CHAS Chassis Replacement Suits PS-001
PS-015-02 15-inch Hard Brush Suits PS-015
PS-015-108
Watering Bottle Suits PS-001 & PS-015
Photo coming soon!
PS-001-PLATE
Polisher Plate Suits PS-001
PS-015-111
Water Pipe
6x4x900mm
Suits PS-001 & PS-015
PS-015-63A Counterweights Plate Assembly Suits PS-015
PS-015-84
Water Pipe
Connector B Suits PS-001 & PS-015
PS-001-42
Metal Plate with Counter Weights
Suits PS-001
PS-015-HEAD
Complete Head Unit Suits PS-015
For use on clean and dry floors. A fine water mist can be used to produce a high gloss wet look. Also ideal for polishing wooden floors.
With an aggressive texture, this pad is ideal for removing wax, dirt and any finish.
Restores glossy finishes whilst removing scuff marks and dirt from medium traffic areas. Can be used for both dry or spray buffing to produce a sparkling shine.
Capable of removing heavy dirt and scuff marks from most floor surfaces.
Suits models: NILFISK BA531, CA531, BA530, CA530, SC450
Sizes: 3 x 60 x 815mm 4 x 60 x 848mm
SQ-NILF-BA531
* WHILE STOCKS LAST *
SETS (all blades come as a set of 2)
Suits models: NILFISK BR752
Sizes: 3 x 60 x 950mm 4 x 60 x 986mm
SQ-NILF-BR752
HAKO SQUEEGEE BLADE SETS (all blades come as a set of 2)
Suits models: HAKO B45
Sizes: 3 x 45 x 886mm
4 x 45 x 924mm Part #
SQ-HAKO-B45
Suits models: TENNANT T2
Sizes: 3 x 50 x 825mm 5 x 55 x 860mm
Suits models: NILFISK BR855
Sizes: 4 x 65 x 1084mm 6 x 70 x 1128mm
SQ-NILF-BR855
Suits models: HAKO B90
Sizes: 4 x 45 x 1180mm 4 x 45 x 1230mm
Part #
SQ-HAKO-B90
(all blades come as a set of 2)
Suits models: TENNANT T12
Sizes: 3 x 60 x 815mm 4 x 60 x 848mm
BLANK SQUEEGEE BLADE SETS WITH NO HOLES (all blades come as a set of 2)
These Blank Squeegee Blades can be cut down to the appropriate size and have holes drilled where required.
Size: 4 x 45 x 1200mm
Part # SQ-4-45-1200
#
VGALAXY-15 Handheld Vacuum Motor
# VGALAXY-2 Collar Handpiece to Rod
# VGALAXY-24 Battery
# VGALAXY-28 HEPA Filter
# VGALAXY-29 Filter Cage
# VGALAXY-30/31 Cap/Seal for Dust Canister
# VGALAXY-ADAP Adaptor Cord for Charging Base
# VGALAXY-CHARGE Charging Base used with VGALAXY-ADAP
# VGALAXY-BRUSH Powerbrush Floor Tool (old version)
# VGALAXY-ROLLER Roller Brush (old version)
# VGALAXY-BRUSH2 Microfibre Soft Roller Head Floor Tool (new version)
# VGALAXY-MROLLER Microfibre Roller Brush (new version)
# VGALAXY-CAN Dust Canister
# VGALAXY-CON Tool Connector
# VGALAXY-HAND Handheld Machine Piece with Motor (old version)
# VGALAXY-HANDV2 Handheld Machine Piece with Motor (new version)
# VGALAXY-PH-CLIP Powerhead Clip
# VGALAXY-ROD Rod
# VGALAXY-WB Wall Mount Bracket
# VGALAXY-WB Wall Mount Bracket
# VGALAXY-BRUSH Powerbrush (old version)
# VGALAXY-24 Battery
# VGALAXY-ADAP Adaptor Cord for Charging Base
# VGALAXY-CHARGE Charging Base
# VGALAXY-30/31 Cap/Seal for Dust Canister
# VGALAXY-ROLLER Roller Brush (old version)
# VGALAXY-BRUSH2 Microfibre Soft Roller Head (new version)
# VGALAXY-28
HEPA Filter
# VGALAXY-29 Filter Cage
# VGALAXY-ROD Vacuum Rod
# VGALAXY-MROLLER Microfibre Roller Brush (new version)
• Bagless cyclonic vacuum cleaner
• 1800 watt power
• HEPA filtration
• 3.0L dust capacity
• Easy to empty dust container
• 8m long power cord
• Auto cord rewind
• Soft rubber rear wheels
• Front castor wheel
• Horizontal & vertical park position
• Tools and accessories 32mm Comes
SPARE PARTS
VALLERGY-1-20 Full Dust Canister
VALLERGY-7 Dust Bin Filter
VALLERGY-23 Cord Rewind Assembly
VALLERGY-35 HEPA Exhaust Filter
VALLERGY-25 Wheel
VALLERGY-42 PCB
VALLERGY-20 Bottom Latch for Dust Canister
VALLERGY-22 Castor Wheel
VALLERGY-31 Motor
VALLERGY-34 Exhaust Board/ Outer Cover
VALLERGY-36 Spring for Exhaust/ Outer Cover
VALLERGY-49 On/Off Button
VALLERGY-37 Lock for Exhaust Board/Cover
VALLERGY-50 Rewinder Button
VALLERGY-40 Power Switch
VALLERGY-51 Sealing Air Channel/ Dust Container
VALLERGY-55 Complete Hose Assembly
VALLERGY-57 Accessories Holder
• Bagged vacuum with HEPA filtration
• 1800 watt power
• Variable suction control
• 3.5L dust capacity
• Dust bag full indicator
• 7m power cord with auto cord rewind
• Soft rubber rear wheels
• Horizontal & vertical park position
• Tools and accessories 32mm
• Uses Starbag AF948S
VALLERGYPRO-20 Dust Bag Support
VALLERGYPRO-35 Complete Hose Assembly
SPARE PARTS
VALLERGYPRO-4 HEPA Exhaust Filter
VALLERGYPRO-6 Exhaust Board Cover
VALLERGYPRO-15 Front Cover Lock with Spring
VALLERGYPRO-17 Grid for Air Inlet
VALLERGYPRO-18 Air Inlet Filter VALLERGYPRO-25 Castor Wheel
VALLERGYPRO-30 Rear Wheel
VALLERGYPRO-45 Power Switch VALLERGYPRO-40 Cord Rewind Assembly VALLERGYPRO-47 Spring for Power Switch Button
VALLERGYPRO-41 Motor
VALLERGYPRO-48 Button for Power Switch SPARE PARTS (cont’d)
Synthetic Dust Bags (5-pack)
XPOWER = dries faster = more productive = MORE PROFIT
All units have full Australian & NZ electrical approvals.
P-230AT-02 Grill Cover (motor side)
P-230AT-04 Left Housing
P-230AT-07 Capacitor
P-230AT-08 3-Speed Switch
P-230AT-09 3-Hour Timer
P-230AT-26 Motor
P-230AT-33 Switch Plate
P-230AT-37 Switch Knob
P-230AT-38 Timer Knob
P-230AT-39 Fan
P-230AT-43 Right Housing
P-230AT-44 Grill Cover (fan side)
X-800-8 Power Cord
X-400-03 Left Housing
X-400-04 Right Housing
X-400-12 Kick Stand
X-400-15 Capacitor/Clip
X-400-23 Grill Cover (motor side)
X-400-29 Grill Cover (fan side)
X-400-33 3-Speed Switch
X-400-34 Switch Plate
X-400-36 Switch Knob
X-400-38 Motor
X-400-58 Fan
X-800-8 Power Cord
X-600-11 Left Housing
X-600-12 Right Housing
X-600-26 Grill Cover (motor side)
X-600-31 Grill Cover (fan side)
X-600-43 Motor
X-600-60 Fan
X-600-87 Capacitor
X-400-12 Kick Stand
X-400-33 3-Speed Switch
X-400-34 Switch Plate
X-400-36 Switch Knob
X-800-8 Power Cord
X-CLAMP Carpet Clamp
Models: X-800C / X-800HC
X-800-8 Power Cord
X-800-19 Left Housing
X-800-20 Right Housing
X-800-27 Grill Cover (motor side)
X-800-32 Grill Cover (fan side)
X-800-89 Fan
X-800-90 Capacitor
X-800-HANDLE Handle
X-800-MOTOR Motor
X-400-33 3-Speed Switch
X-400-34 Switch Plate
X-400-36 Switch Knob
X-CLAMP Carpet Clamp
X-800-BUSHING Bushing for Fan
• HP
•
• Amp
• Rated Airflow
• Daisy Chain Feature
• Speed Control Variable Speed Control
• 3-Hour Timer
• Stackable Up to 5 units
• Unit Size (approx) 56 (L) x 25 (W) x 57 (H) cm
• Unit weight
• Usage Positions
• Carry Handle
•Thermal Protection
• Body
Drying Capacity
Model: X-47ATR
X-47ATR-1 Front Air Grille Cover
X-47ATR-4 Outlet Cover
X-47ATR-9 AC Receptacle
X-47ATR-11 Control Circuit Board
X-47ATR-12 Portable Handle
X-47ATR-13 Timer Switch
X-47ATR-14 Timer Knob
X-47ATR-15 Rack Adjustment Handle Pair
X-47ATR-16 Switch Plate
X-47ATR-22 Motor
X-47ATR-CB Circuit Breaker
X-47ATR-FAN Fan
X-47ATR-GSCREW Screw for Front Grill (Silver)
The XPOWER Multi-Drying Kits easily attach to X-400 and X-800 Series Air Movers and allow air flow to be directed in three different directions with adjustable air flow control 'gates' at the end of each hose.
They can also be used in janitorial or restoration applications to direct air flow anywhere where positioning a blower is not possible.
X-400-MDK
Suits X-400 Air Movers
Suits X-800 Air Movers
KIT INCLUDES:
(A) Durable ABS Blower/Fan Adaptor with Locks
(B) 3 x High Quality and Flexible 2.7m Long Vinyl Hose
(C) 3 x Adjustable Airflow Control Gates
(D) 6 x Metal Hose Clamps
Features powerful ventilation in a compact size that does not compromise on power. Able to operate and store vertically or horizontally, these high velocity low profile fans are ergonomically designed with an easy to carry moudled handle and made from durable and rugged polypropylene housing. Other features include wrap around cord design, non-slip rubber feet, quiet performance and stackability up to 6 units high, making it ideal for loading in a truck or on a hand cart. It also comes with a built-in power outlet for daisy chaining which will allow an additional six (6) of the same units to run on one circuit at the same time.
Motor 1/3HP
Power 240 Watt / 1.0 Amp
Rated Airflow (on high) 1000 CFM
Speed Control 3 speed switch
Power Cord Length 4.7 metres
Operating Positions 2 positions (Vertical & Horizontal)
Stackable Up to 6 units high Unit Weight 8.7kg
Unit Size 45 x 45 x 21cm
Housing Polypropylene
PL-700A-01
PL-700A-05
PL-700A-18 Fan
PL-700A-20
X-400-15 Capacitor/Clip
X-800-8 Electrical Cord
The XPOWER PDS-12 Pressurized Drying System is a compact and lightweight wall cavity dryer that quietly delivers heated air for drying under sinks, behind cabinets and permanent furniture.
Equipped with variable speed control, professional restorers now have complete control of the airflow for any drying application. The operating volume on the PDS-12 is very low which makes it ideal for occupied dries, meaning it can also be used during the night and other quiet times.
Features:
• Pressurized heated airflow for optimal wall cavity drying
• Variable speed control for continued drying on occupied dries
• Quick release nozzles and hose attachments improve efficiency by making setup and takedown easy
• Two 1 PSI pressure release valve maintains consistent drying capability
• Convenient on-board cord wrap for easy storage without messy cords hanging
• Easy grip carry handle for easy portability from storage to job site
• Lightweight & compact design to reduce fatigue and maximise storage space
• Low operating noise volume
The XPOWER X-3400 Air Scrubber & Purifier is a Commercial Grade portable filtration system that draws air in from the surrounding environment and passes it through a series of filters to remove contaminants such as particles, gases, and/or chemicals. They are commonly used on restoration jobs where airborne contaminants are present or will be created/disturbed during the restoration process, such as mould, dust, fumes, etc. These hazardous particles can settle on carpet, upholstery and furnishings, or be drawn into the HVAC system and contaminate other parts of a building. They can also be used in Public Health Quarantine situations as Air Scrubbers help protect the health of workers and building occupants by providing a clean and healthy environment.
Motor 1/2 HP
Watts 220 W
Amp 1.0 A
Rated Airflow 650 CFM
Filter System 3-Stage Filtration
Speed Control Variable
Unit Size (cm) 50 (L) x 31 (W) x 55 (H)
Unit Weight 13.1 kg
Housing ABS Plastic
Stackable Up to 5 units high
• HEPA Filter Change Indicator Light
• Wrap Around Cord Design
• Larger & Wider Air Outlet
• HEPA Filtration 99.975 efficiency
Model: X-3400
X-3400-1 Air Inlet Foam Cap
X-3400-2 Air Inlet End Cover
X-3400-4 Stainless Steel Latches Kit
X-3400-5 Nylon Mesh Filter
X-3400-6 Pleated Media Filter
X-3400-7 Thick HEPA Filter
X-3400-9 Pressure Switch
X-3400-11 Filter Clean/Hange Alarm Light
X-3400-12 Speed Control Panel
X-3400-13 Speed Switch Knob
X-3400-14 Switch w/ Circuit Board
X-3400-16DH15 16” Diameter, 15ft Inlet Ducting
X-3400-17 Capacitor
X-3400-19 Hinge (pair) 2pcs + 8 screws
X-3400-20 Motor with Fan
X-3400-CCB Control Circuit Board
X-3400-CF35 Carbon Filter to be used with H35 HEPA Filter
X-3400-H35 HEPA Filter to be used with CF35 Carbon Filter
Developed to excel in even the toughest water damage restoration environments, the professional grade XPOWER LGR Dehumidifier extracts more moisture than much larger commercial models. Features ‘Dual Intake Technology’ which boosts efficiency and perfomance in a wide range of operating conditions. Designed to maximise storage space, these compact units stack up to 3 high and features 2 molded handle grip points on the front and back. For added mobility, a separate model including wheels and handle is also available. A user friendly digital control panel monitors your job site’s current humidity and records operating time. Also features an auto purge pump with drainage hose that automatically purges when full, eliminating the task of monitoring collection tank levels.
XD-85LH-01 Water Pump Assembly
XD-85LH-06 Motor with Fan
XD-85LH-12 Screw with Knob (2pc)
XD-85LH-16 E47 Display Circuit Board
XD-85LH-2107 Capillary
XD-85LH-37 Display Board Holder
XD-85LH-46 12.2m Drain Hose with Connector
XD-85LH-55 Wheel Set
XD-85LH-03 Defrost Sensor
XD-85LH-07 Compressor
XD-85LH-13 Drying Leach
XD-85LH-17 Display Decal
XD-85LH-22
Primary Intake Filter (Stainless Steel)
XD-85LH-41 Velcro Set
XD-85LH-47 Water Pipe Female Connector
XD-85LH-BH Bottom Housing Photo coming soon!
XD-85LH-04 Humidity Sensor
XD-85LH-08 Heating Exchanger
XD-85LH-14 E47 Control Circuit Board
XD-85LH-18 Power Cord Wireable (new style)
XD-85LH-24 Secondary Cart Filter Assembly
XD-85LH-42 Strap Fixer (Pair)
XD-85LH-05 Temperature Sensor
XD-85LH-11 Fan Capacitor
XD-85LH-15 Compressor Capacitor
XD-85LH-20 Water Pipe Male Connector
XD-85LH-25
Secondary Intake Filter (Stainless Steel)
XD-85LH-54 Wheel Holder Photo coming soon!
XD-85LH-49 Foldable Trolley Handle
XD-85LH-44 Screw with Knob (2pc)
XD-85LH-INTAKEADAP Intake Adaptor
VD-65/85L-DHOSE Drain Hose
FOR REMEDIATION & RESTORATION USE
• 110 metre roll
• 560MM width
• 90 micron
Part No: FILM-LF
• Motor Power
• Rated Airflow
• Speeds
• Cord Length
• Nozzles
• Unit Weight
• Unit Dimensions (LxWxH)
• Housing
• Noise Level
• Cold Fogger • Cordless operation
• Lithium Ion battery (Rechargeable)
• Ultra Low Volume (ULV)
• Maximum coverage with minimal solution use
• Adjustable flow rate / droplet size (avg. < 50 microns)
• Portable with carry handle
• 1.2L tank capacity • Power: 350 Watts
• Spray Distance: Up to 8 metres
• Battery Life: Up to 32 mins. run time (dispenses approx. 6.4L per battery charge)
• Charging Time: 3 Hours
• Unit Weight: Approx. 2.5kg
• Strong Polypropylene Body
• Comes with Charger and Spare Nozzle
Model: F16B
F16B-08 Relay
F16B-BATTERY Battery Pack
F16B-9 Magnetic Valve (Pump)
F16B-MTR Motor (26V)
F16B-ADAP Charging Adaptor
F16B-NUT Nut for Volume Control Knob
F16B-SEAL SolutionTank Cover Seal Ring
F16B-SOCK DC Socket
F16B-SWITCH Power Switch
F16B-VALVE Throttle Valve
F16B-VOLKNOB Volume Control Knob
The XPOWER B-55 Home Pet Dryer is your key to saving time and money by getting professional grooming results at home. Featuring over 5x the power and air volume of human hair dryers, the B-55 can efficiently dry dense double coats and is best suited for small to medium breeds. An included DIY Pet Styling Guide provides step by step instructions for grooming your pet. The B-55 generates a safe warm air output that is safer for your pet’s coat and skin than a standard hair dryer.
Featuring a powerful, lightweight, super quiet 2 HP motor with 2 speed controls, you have the flexibility to dry even timid pets with ease. With 3 included nozzle accessories, the B-55 multi-functions as a vacuum for picking up loose pet hair as well as other household tasks like cleaning your car’s interior, dusting hard to reach spaces, and drying a variety of surfaces. Built to last, the XPOWER B-55 pet dryer features the same durable housing as our commercial line of pet dryers and includes 1 year warranty coverage for home use.
The XPOWER B-2 Pro-at-Home Pet Dryer is your key to saving time and money by getting professional grooming results at home. Featuring 5x the power and air volume of human hair dryers, the B-2 can efficiently dry dense double coats on even the largest breeds. Safer for your pet’s coat and skin than a standard hair dryer, this pet dryer will not produce harmful hot air. Featuring a powerful, lightweight, quiet 2 HP motor with 2 speed switch, you have the flexibility to dry even timid pets with ease. With 6 included nozzle accessories, the B-2 multi-functions as a vacuum for picking up loose pet hair as well as other household tasks like cleaning your car’s interior, dusting hard to reach spaces, and drying a variety of surfaces. Built to last, the XPOWER B-2 pet dryer features the same durable housing as our commercial line of pet dryers and includes 1 year warranty coverage for home use.
B-2-HOSE-56 Screw On Hose
B-2/24/27-29 Filter Set
B-2/4/24/27-23 Rubber Feet
The XPOWER B-24 Heated Force Dryer gives you the power and heat to dry those pets even faster! The variable speed control along with dual heat settings gives you complete control over the amount of air and temperature you need to dry any dog, small or large with short or long hair. Like all XPOWER dryers, the B-24 is extremely lightweight and up to 40% quieter than most dryers in the market. Its rugged ABS housing makes it super durable and the filter system protects the motor from debris for maximum efficiency. The B-24 is compatible with our wall or stand mount kits letting you put your machine wherever it is most convenient and secure.
Features:
• Remarkably QUIET & LIGHTWEIGHT
• Powerful 1800W motor with thermal protection
• Variable speed settings
• 2 Heat settings
• Durable and rugged ABS housing
• Easy-to-change and washable filters
• 2.4m heavy duty flexible PU hose
• 3 pcs nozzles attachments
• Ideal for professional grooming
# B-2/24/27-29 Filter Set
# B-4/24/27-13H Screw On Hose (Heavy Duty)
# B-4/24/27-23 Round Nozzle
# B-4/24/27-24 Flat Nozzle
# B-4/24/27-26 Cone Nozzle
# B-4/24/27-19 Switch Knob
# B-SCA Stand Conversion Arm
# B-SMK-3 Conversion Stand Mount Kit
# B-WMK-2 Wall Mount Kit
# B-2/4/24/27-23 Rubber Feet
# B-24-01 Left Housing
# B-24-02 Right Housing
# B-24-04 Heating Switch
# B-24-06 Variable Switch w/ Circuit Board
# B-24-11 Heating Element
# B-24-14 Carbon Brush Set (2)
# B-24-21 Power Cord (3m)
# B-24-26 Control Circuit Board
# B-24/27-02 Rear Cover
# B-24/27-08 Motor
The XPOWER B-27 Professional Double Motor Force Dryer is the most powerful dryer you will ever use and was designed to be extremely quiet, lightweight and powerful. With a powerful 6 HP double motor this dryer will dry the thickest coat reducing drying time and increasing income. Unlike other double motor dryers, the B-27 is remarkably quiet, protecting against hearing loss and animal trauma. The variable control switch allows for precise airflow to dry small or large breeds with short or long hair. A highly balanced motor and improved carbon brush design creates at least 40% less noise and increases the motor life of the dryer. It is also made with durable ABS plastics and comes complete with 3 styling nozzles. The protective 3-filter system keeps hair out of the motor keeping your dryer running efficiently. When you need a high powered dryer that can take on any job, the XPOWER B-27 is ideal!
Features:
• Remarkably QUIET & LIGHTWEIGHT
• Powerful dual motor 2500W with thermal protection
• Variable speed settings
• High impact and rugged ABS+PC housing
• Easy-to-change and washable filters
• 2.4m heavy duty flexible PU hose
• 3 pcs nozzles attachments
• Ideal for professional grooming
# B-2/24/27-29 Filter Set
# B-4/24/27-13H Screw On Hose (Heavy Duty)
# B-4/24/27-23 Round Nozzle
# B-4/24/27-24 Flat Nozzle
# B-4/24/27-26 Cone Nozzle
# B-4/24/27-19 Switch Knob
# B-SCA Stand Conversion Arm
# B-SMK-3 Conversion Stand Mount Kit
# B-WMK-2 Wall Mount Kit
# B-2/4/24/27-23 Rubber Feet (4pc)
# B-24/27-02 Rear Cover
# B-24/27-08 Motor
# B-27-09 Carbon Brush Set
# B-27-14 Power Cord (2m)
# B-27-16 Right Housing
# B-27-26
Control Circuit Board
# B-27-27 Left Housing
# B-27-CONN NEW Connector Nozzle
B-WMK-2
Adjustable Dryer Arm Conversion Stand Mount Kit for Professional Force Dryer (suits B-4/B-24/B-27 models)
Features a multiple position tilt capable stand and Stand Conversion Arm (SCA) so that you can replace your dryer’s hose and achieve maximum hands-free styling control. Compatible with all XPOWER professional force dryer models, the SMK-3 includes a height adjustable (110cm- 150cm) spring assisted shaft, multiple adjustable dryer caddy positions and expanded base diameter for optimized stability. Uniquely designed to turn the unit into a stand dryer, it rolls smoothly on 5 foldable sturdy legs with lockable castor wheels and features an accessory station which accommodatess up to four attachments, providing a neat and secured work station.
Wall Mount Kit for Professional Force Dryer (suits B-2/B-4/B-24/B-27 models)
The uniquely designed bracket mounts the unit securely to a wall, freeing up valuable floor and table space. When you are finished using the unit, simply snap the hose and nozzles on the bracket and it’s completely out of your way.
# B-SMK-3
Stand Conversion Arm (suits B-4/B-24/B-27 models)
The XPOWER Stand Conversion Arm consists of a straight arm and 360° rotatable flexed nozzle. It will give you a “hands free” option when it comes with XPOWER pet dryers. Easily screws on and the non-slip nozzle can be rotated to direct airflow.
# X-800TF-MDK
3-Hour Timer & 3 Speeds # X-400TF-MDK
The Multiple Dry Kit (MDK) allows airflow to be routed to up to three separate areas simultaneously. It consists of an adapter, three 265cm high-quality flexible vinyl hoses and three control gates. Three separate hoses have adjustable gates to control airflow to each area.
Features:
• Powerful and extra quiet motor
• 3 speeds (Low / Medium / High)
• Durable and rugged injection mould housing
• Provided with filter and unique 3-hour timer
• Rubber feet for multiple drying position stability
• 4-Position usage (0°, 20°, 45°, 90°)
Note: These dryers do not have a heating function.
SPARE PARTS & ACCESSORIES
# X-800TF-MDK-FILT Filter Kit
The XPOWER X-400TF and X-800TF “Multiple Cage Dryers” are designed for low speed cage drying on small to large breed dogs when room temperature heat is desirable. The X-400TF and X-800TF are featured with flexible Multiple Dry Kits (MDK), with 3-speeds as well as a 3-hour timer. They are preferred by groomers who desire multiple cage drying from a single, low speed, quiet, low power usage and high job effectiveness.
Cycles
The XPOWER X-47 ATR is the ultimate axial fan – packed with features such as a variable speed control, 3-hour timer, 360-degree rotation rack/stand, and built in daisy chainable power outlets to get a variety of jobs done. A specially designed sealed motor prevents damage from water and other contaminants.
The X-47 efficiently produces up to 2800 CFM airflow with a low 1.0 Amp draw. Use this high performance fan with its unique grille design to extend a powerful and focused stream of air up to 60 ft. in any direction. Easily transportable, this unit’s super lightweight yet durable ABS injection molded housing can be stacked up to 5 units high. Ideal for drying floors in an enclosed space; by directing airflow downward, the movement of the air covers the entire floor, walls and ceiling and helps to dry all damp areas, preventing mold and bacteria growth.
Features:
• Sealed induction motor
• Variable speed control switch
• Built-in power outlets for daisy chain feature
• 3-hour timer
• Stackable (up to 5 units high for easy storage)
• Carry handle for easy transportation
• Thermal protection
• 360 rotation-rack stand included
• Super lightweight
• 6 metre power cord length with wrap-around cord design
The XPOWER X-3400 Professional Air Scrubber is a commercial-grade air purifying system, providing maximum air filtration to promote a healthier environment for all. A portable filtration system that draws air in from the surrounding environment and passes it through a series of filters to remove contaminants such as particles, gases, and/or chemicals. Commonly used on restoration jobs where airborne contaminants are present or will be created/disturbed during the restoration process such as mold, dust and fumes, it can also be adapted for use in a pet grooming enviroment by capturing pet odours and pet hairs.
Features:
• Variable speed control switch
• 3-stage HEPA filtration
• HEPA filter change indicator light
• HEPA filtration 99.975% efficiency
• Stackable (up to 5 units high for easy storage)
• Carry handle for easy transportation
• 4 metre power cord length
• Wrap-around cord design
The Vycel Electrostatic Sprayer delivers a positively charged, water-based spray, to aid disinfecting large areas quickly. Each litre of disinfectant that passes through the electrostatic sprayer delivers billions of particles of disinfectant solution every 10 minutes, covering up to 15,000 sq. ft from one single tank.
Electrostatic sprayers and conventional foggers are both used for disinfecting and applying various liquids, but they operate differently and offer distinct benefits. Here are the advantages of an electrostatic sprayer compared to a conventional fogger:
1. Improved Coverage
Vycel Electrostatic sprayer charges the liquid droplets as they are sprayed, causing them to be attracted to surfaces like a magnet. This results in better and more even coverage on all sides of objects, including hard-toreach areas, which conventional foggers may struggle to reach.
2. Less Disinfectant used
Vycel Electrostatic sprayer uses less liquid to achieve the same coverage as conventional foggers, reducing waste and saving on the cost of disinfectant solutions.
3. Faster Application
Vycel Electrostatic sprayer can cover a larger area more quickly than conventional foggers because they provide better coverage in a single pass. This can lead to time savings, especially in larger spaces.
4. Enhanced Surface Adhesion
Vycel Electrostatic sprayer creates a more thorough and consistent coating on surfaces, ensuring better adhesion of the disinfectant solution. This can improve the effectiveness of the disinfection process.
5. Minimal Operator Fatigue
Vycel Electrostatic sprayer is ergonomically designed, lightweight and easy to use, which can reduce operator fatigue during extended use, making it very user-friendly.
6. Environmentally Friendly
Due to it’s efficient coverage and reduced chemical usage, Vycel electrostatic sprayer is considered environmentally friendly, as there is a reduction in chemical waste and runoff.
The Vycel Electrostatic Sprayer protects against viruses and pathogens by delivering a positively charged waterbased antimicrobial spray, creating a mist that evenly coats and wraps surfaces, cleaning the air it passes through and disinfecting all surfaces rapidly and with ease. Leaving viruses nowhere to hide.
• Coats and wraps 100% of surfaces effectively for full coverage
• Covers up to 15,000 sq ft per tank (350 sq ft per minute coverage)
• Disinfects and sanitises an area in 25% of the time
• Uses up to 75% less liquid chemical solutions than traditional disinfecting methods
• Dwell time of just 30 seconds and no wiping required
• Emits billions of particles of spray every minute
• No need for full PPE
• No need to leave the area being sprayed
• Easy to use & runs quietly
• Cordless & battery powered
• Up to 99.99% effective against pathogens
Outdated cloth and spray are inefficient cleaning methods of the past. Specifically designed to deliver the optimum spray coverage to weight ratio for electrostatics sprayers, Vycel sanitises and disinfects up to 15,000 sq ft on a single tank in less than 40 minutes. The backpack is small and light weight making it easy to use in all spaces, saving you both time and money.
• Light weight & portable (7.2kg full ~ 3.2kg empty)
• Tank capacity: 4 Litres (run time of 40 minutes per tank)
• 3+ hour battery run time and easy swap and dock charge system
• Easy tank removal and refill
• Illuminated battery status indicator
• Compact for use in confined spaces
• Comfort grip handle
• Spray distance range: 1-2 metres
• Micron size: 40 micron nozzle
• Pump maximum flow: 1.9 L/min
• Pump operating pressure: 9 Bar / 130 PSI
• Pump motor power 10W
• Recharge time: 110 minutes
The recent Covid-19 pandemic has increased the importance and necessity of effective disinfecting. As life gets back to the new normal, people are more disinfecting-conscious than ever and have come to expect businesses and shared public spaces to be disinfected too, keeping you, your staff and your customers healthy and safe.
Medical
Doctors Surgeries
Mediical Centres
Hospitals
Dentists
Aged Care
Hospitality
• Hotels
• Restaurants
• Bars
Transport
• Airports
• Planes
• Trains / Trams
• Buses / Cars
Office Spaces
Warehouses
Education
• Schools
• Colleges
• Universities
Health Clubs
Gyms
Fitness Studios
Sports Clubs
Gov’t Buildings
Prisons
Job Centres
Entertainment
Cinemas
Theatres
Stadiums
Shops & Showrooms
• Retail
• Salons
• Showrooms
Places of Worpship
• Churches
• Chapels
• Temples
• Synagogues
• Mosques
• Cold Fogger • Cordless operation
• Lithium Ion battery (Rechargeable)
• Ultra Low Volume (ULV)
• Maximum coverage with minimal solution use
• Adjustable flow rate / droplet size (avg. < 50 microns)
• Portable with carry handle
• 1.2L tank capacity • Power: 350 Watts
• Spray Distance: Up to 8 metres
• Battery Life: Up to 32 mins. run time (dispenses approx. 6.4L per battery charge)
• Charging Time: 3 Hours
• Unit Weight: Approx. 2.5kg
• Strong Polypropylene Body
• Comes with Charger and Spare Nozzle
Model: F16B
AIR PURIFIERS
Our XPOWER X-3400 Air Purifier Scrubber is a COMMERCIAL grade portable HEPA filtration system that draws air in from the surrounding environment and passes it through a series of filters to remove airborne contaminants.
The 3-stage filtration system with true 99.975% HEPA captures a wide range of compounds and prevents organism migration from location to location. These compounds includes gases, chemicals, allergens, pollens, bacteria, mould, fumes and dust. The extra large air outlet offers high air volume processing for thorough purification
The importance of air quality as a health issue is of utmost importance during this time.
In addition to masks and vaccinations, epidemiologists and health officials worldwide are STRESSING the importance of the use of HEPA filtered air purification systems during this time as indoor air is more contaminated than outdoor.
The X-3400 is used in environments such as classrooms, offices, healthcare settings, hotels, quarantine and other commercial areas where there is high density of people in enclosed spaces that may not be able to social distance.
FILTRATION
3 LEVEL - HEPA 99.975% EFFICIENY HEPA FILTER INDICATOR CHANGE LIGHT
MOTOR 1/2 HP
WATT 220 WATT with low power usage
AMP only 1 AMP DRAW
RATED AIRFLOW 1104 cmh (CUBIC METRES PER HOUR)
IDEAL FOR ROOM SIZE up to 92sqm
MICRON 0.3 MICRON
SPEED CONTROL VARIABLE
UNIT SIZE L50 X W31 X H51
STACKABLE 5 UNITS HIGH
CORD 6 METRE RUBBER CORD WITH WRAP AROUND DESIGN
HOUSING STRONG ABS
RENSAIR HEPA AIR PURIFIER
• Traps and destroys 99.97% of airborne bacteria and viruses
• Hospital Grade HEPA H13 Filtration
• 9,000 hours continuous use before filter change
• Ozone free18W UVC Lamp
• Purifies 560m3 of air per hour
• Quiet operation from 45dBA
• Independently Laboratory Tested
• User friendly - plug in, set and go
• Portable
• Extreme reliability and low maintenance
• 360o Coverage
• Digital control panel
Originally designed for use in European hospitals, the Rensair Air Purifier stands out above the rest. Not only does it trap 99.97% of airborne pathogens and viruses, but its unique, patented design with UVC lamp kills them in seconds giving you complete peace of mind.
Rensair is trusted all over Europe and the USA being used in Hospitals, Schools, Accommodation, Hospitality, Offices and more.
Example of use in schools:
Unit operates 10 hours per day, 5 days a week, based on 40 school weeks per year. This means that the HEPA filter and UVC lamp needs to be replaced every 4.5 years. Amazing!
RENSAIR HEPA AIR PURIFIER
RENSAIR HEPA AIR PURIFIER
Part of the family
Bonnie Bio is a worldwide leading brand that manufactures a wide range of compostable products that are an environmentally responsible alternative to plastic products. We offer a range of compostable products that includes garbage bags in various sizes, drinking straws, gloves, cutlery and more for both home use and in business and commercial applications.
Our aim is to make a difference with our internationally certified compostable plastic alternatives which are all made from natural ingredients with no chemical additives to ensure non-toxicity and allow for complete composting and biodegradability.
Our products are designed to break down back into CO2, water and biomass, which are renewable resources and they don’t leach any toxins into the ground whilst breaking down back into the earth.
Around 165 million tonnes of petroleum-based plastic has found its way into our oceans, with an estimated 8 million tonnes being added each year. Research shows that up to 50% of plastic is used only once and then thrown away and that we’re only recycling 9% of the plastic we’re using. Traditional petroleum-based plastic not only takes up to 500 years to decompose but also leaches toxic chemicals into the environment while decomposing. We are slowly ruining our planet and it’s time to change this.
Bonnie Bio wants to make a difference. We believe that the use of our certified compostable products will contribute to the sustainability of the planet for our current and future generations by offering alternative options to petroleum-based plastics, without compromising the useful need for plastic-type materials. Our products are toxin-free and environmentally kind.
As the name implies, our Bonnie Bio compostable products are made from corn starch. PLA (Polyactic Acid) is typically made from the sugars in corn starch, cassava or sugarcane. It is biodegradable, carbon-neutral and edible. To transform corn into plastic, corn kernels are immersed in sulfur dioxide and hot water, where its components break down into starch, protein, and fiber.
The starch is comprised of long chains of carbon molecules, similar to the carbon chains in plastic from fossil fuels. Biodegradable plastics take three to six months to decompose fully. That’s much quicker than synthetic counterparts that can take several hundred years. Exactly how long a biodegradable product takes to break down depends on various factors, such as temperature, the amount of moisture and oxygen present.
Put simply, you won’t be able to tell the difference! Our Bonnie Bio corn starch compostable products deliver like no other and are just as durable as petroleum-based plastic but they decompose like paper. The best of both worlds and for our planet! Within 3-6 months, 90% of Bonnie Bio’s certified compostable corn starch PLA plastic alternatives will decompose, without any toxins leaching into the earth. Our products look, feel and deliver like traditional plastic, without the lengthy decomposition rate.
The term ‘Biodegradable’ often refers to plastics to which additives were added, for it to more rapidly disintegrate in landfill or natural environments. However this process can still take many years but what is more troubling is that it leaves toxic residue or micro-plastics in the environment, posing a danger to humans and animals.
‘Composting’ on the other hand, is a form of waste disposal where an organic material is able to decompose naturally under oxygen and microbe-rich conditions and back into natural elements such as biomass, water and CO2 without leaching any toxins into the environment during the decomposition process. The benefit of this is that not only does the material not end up in landfill but when turned into compost, can help fertilise plants and vegetation.
Thus it holds true that Bonnie Bio’s certified ‘Compostable’ products are significantly better and more environmentally friendly than other similar competing ‘Biodegradable’ products.
There are different compostability standards to help you determine the necessary conditions required for products to decompose as well as how long you can expect it to take. In Australia, there are two standards for compostable products: AS 4736 for Industrial Compostability; and AS 5810 for Home Compostable
In Australia, for a plastic material to be certified as compostable, it must comply with the AS 4736-2006 standard. This standard provides the criteria against which plastics materials that are to be biodegraded in industrial anaerobic composting facilities, are assessed. Industrial composting facilities are able to process organic waste at high temperatures that cannot be replicated in the home (50°C or higher), thus accelerating the rate at which the waste decomposes. Therefore, just because something has been certified for the AS 4736-2006 standard, does not mean it will decompose in the same way in a home compost system!
For a plastic material to be certified to the AS 5810-2010 home compostability standard, it must undergo stringent testing conducted by recognised and accredited third-parties. Due to the differences between a home compost system and industrial compost facilty, the testing period for this standard is a maximum of 12 months however, the end results remain the same as the AS 4736-2006 standard. That means a minimum of 90% biodegredation, no toxic effect to compost, plants and earthworms and materials should contain more than 50% organic material.
The AS 5810-2010 standard is preferred as industrial compost facilities are still uncommon, therefore it is best to ensure your product can be disposed of easily in the home.
Our Bonnie Bio compostable dog poop bags & multi-purpose bags are a great alternative to plastic bags and are ideal for picking up after your pet and for home use including the disposal of organic food and kitchen waste.
These bags break down due to being exposed to oxygen, heat, UV light and microbial activities. When these bags decompose, they create carbon dioxide, biomass and water, which all present no danger to the environment. No toxins are leached into the surrounding soil whilst decomposing making it safe for our environment. The ink used to print on these bags is a soy-based ink.
FEATURES:
• Made from Corn Starch Perforated rolls for easy tearing
• Bags supplied on an inner core roll for use with park dispensers
Easy to store and carry 100% home compostable & toxin free
• Natural product with up to 9 month shelf life
2L Compostable Dog Poop Bags
Part No: BB-DOG-9
• Box contains 9 single rolls
• Roll width: 205mm
• Each roll contains 225 perforated bags
• Bag volume: 2L
• Bag size: 205mm + 60mm (x2) x 395mm x 18 microns
• Tie-up handles for easy use and disposal
• Great for COUNCILS
Part No: BB-DOG-DISP
Works with: 2-2.5L Compostable Multi-Purpose / Dog-Poop Bags (BB-2.5-48)
• Comes with carabiner clip so it can be easily attached to dog lead
• Fits 60mm wide rolls
2-2.5L Compostable Multi-Purpose / DogPoop Bags
Part No: BB-2.5L-48
• Box contains 48 single rolls
• Roll width: 60mm (small enough to fit snugly into your pocket, carry bag or handheld dispensers)
• Bag size: 230mm x 330mm x 18 microns
• Each roll contains 15 perforated bags
• Bag volume: 2-2.5L
Our Bonnie Bio compostable rubbish bags and bin liners are a great alternative to plastic bags and are ideal for use in bins in kitchens, homes and work/office areas, as well as for larger garbage wheelie bins. Suitable for both indoor and outdoor use.
These bags break down due to being exposed to oxygen, heat, UV light and microbial activities. When these bags decompose, they create carbon dioxide, biomass and water, which all present no danger to the environment. No toxins are leached into the surrounding soil whilst decomposing making it safe for our environment.
FEATURES:
• Made from Corn Starch
• Perforated rolls for easy tearing 100% home compostable & toxin free
• Printed on one side with dark green soy-based ink
• Natural product with up to 9 month shelf life
30 LITRE
Suitable for Kitchen Compost Caddy
30L Compostable Bin & Rubbish Bags
Part No: BB-30L-45
• Box contains 45 single rolls
• Each roll contains 15 perforated bags
• Bag volume: 30L
• Bag size: 250mm + 150mm (x2) x 570mm x 22 microns
LITRE
60L Compostable Bin & Rubbish Bags
Part No: BB-60L-24
• Box contains 24 single rolls
• Each roll contains 15 perforated bags
• Bag volume: 60L
• Bag size: 327.5mm + 163.75mm (x2) x 805mm x 23 microns
120-140L Compostable Garbage & Wheelie Bin Bags
Part No: BB-120/140L-10
• Box contains 10 single rolls
• Each roll contains 10 perforated bags
• Bag volume: 120-140L
• Bag size: 455mm + 227.5mm (x2) x 1320mm x 22 microns
80L Compostable Garbage Bags
Part No: BB-80L-20
• Box contains 20 single rolls
• Each roll contains 10 perforated bags
• Bag volume: 80L
• Bag size: 480mm + 185mm (x2) x 1045mm x 23 microns
240L Compostable Garbage & Wheelie Bin Bags
Part No: BB-240L-9
• Box contains 9 single rolls
• Each roll contains 10 perforated bags
• Bag volume: 240L
• Bag size: 570mm + 285mm (x2) x 1400mm x 30 microns
Our Bonnie Bio compostable gloves have the same look, feel and strength of plastic gloves, whilst being environmentally friendly. Once you use our gloves, there’s no going back! Ideal for food preparation, catering, serving food, hospitality, home, kitchens & much more.
These gloves break down due to being exposed to oxygen, heat, UV light and microbial activities. When these gloves decompose, they create carbon dioxide, biomass and water, which all present no danger to the environment. No toxins are leached into the surrounding soil whilst decomposing making it safe for our environment.
FEATURES:
Made from Corn Starch
• 100% home compostable & toxin free
• Printed on one side with dark green soy-based ink
Ambidextrous use on either hand
• Natural product with up to 12 month shelf life
Retail box has perforation design for easy dispensing
Medium Size Compostable Disposable Gloves
Part No: BB-GLOVE-M-24
• Carton contains 24 boxes of gloves
• Each box contains 100 indivdual gloves (50 pairs)
• Glove size: Medium (M)
• Dimensions: 280mm x 230mm x 20 microns
• Colour: Transparent
XL Size Compostable Disposable Gloves
Part No: BB-GLOVE-XL-24
• Colour: Transparent MEDIUM
• Carton contains 24 boxes of gloves
• Each box contains 100 indivdual gloves (50 pairs)
• Glove size: Extra Large (XL)
• Dimensions: 305mm x 260mm x 20 microns
The P50 is a professional extractor designed for
All images used are for illustrative purposes only. Colours may vary.
V-P50-2 Bucket
V-P50-17 Bucket Handle
V-P50-33 Pump Foam Filter
V-P50-36.7 Clamping Ring 10mm
V-P50-86.1 Carbon Brush Holder for Motor
V-P50-9 Nozzle/Valve for Floor Wand
V-P50-13 Inlet Foam Filter
V-P50-29 Elbow Connector
V-P50-35 Snap Lock
V-P50-1341 Floor Wand Head Assembly
V-P50-307b Spray Nozzle for Upholstery Tool
V-P50-341 Transparent Water Hose
V-P50-38 Velcro Band 1 Set
V-P50-31 Brass Male Connector
V-P50-98 On/Off Switch 4-Pin
V-P50-36.1 Clamping Ring 8.7mm
V-P50-180 Water Pump Assembly
V-P50-310 Male Connector
V-P50-345.2 2.4m Hose Assembly
V-P50-86 Bypass Motor
V-P50-99 On/Off Switch 3-Pin
V-P50-300 Upholstery Tool
V-P50-330 Hose Handle
V-P50-347 Stainless Steel Tube 1pc
V-P50-348 Water Hose (Blue)
V-P50-791012 Cover Assembly
Parts Breakdown
Tank Capacity 30L (recovery) / 30L (solution)
Watts 1500 W
Motor 2 Stage - High Water Lift
Max Water Lift 3000mm H2O
Max Air Flow 50 L/sec
Pump with Bypass Membrane / 130 PSI
Power 80 W
Max Pressure 9 bar
Max Water Flow 4.5 L/min
Floor Wand Included
Cleaning Width 300mm
Nozzles x3
Upholstery Tool Included
Cable Length 10 metres
Hose Length 5 metres (Solution and Vac)
Weight of machine 24 kg
Dimensions 38 x 50 x 78 cm
Tank Construction High density polyethylene
Portable Carpet Extraction Machine - 30 Litres
Comes with: • 5 metre hose • Carpet Floor Wand
Upholstery Tool
UTCE-5-MQD
Quick Disconnect Mal
VCUTLASS-13
Quick Disconnect Female
VCUTLASS-25 Wheel
VCUTLASS-49 Filter - Diam 46
VCUTLASS-3 Gasket
UTCE-5 Upholstery Tool
VSABRE-41/42 Lid Clip with Screws
Image Coming Soon
VCUTLASS-17 2 Position Switch
VCUTLASS-30 Complete Manifold
VCUTLASS-5A Lower Motor Gasket
VCUTLASS-NOZZLE Nozzle Tip
VCUTLASS-ORING ‘O’ Ring for Wand
VSABRE/CUTL-WAND Carpet Wand
VCUTLASS-VALVE
Complete Valve Metal Coupling
VCUTLASS-LOCK Valve Lock
VCUTLASS-1 Filter
VCUTLASS-12 Extension for Metal Coupling
VCUTLASS-19 Rislan Pipe
VCUTLASS-36/37 Cover with Gasket
VCUTLASS-BRACKET Nozzle Bracket
VCUTLASS-NUT Nut for Nozzle
VSABRE-68A Pump
VSABRE/CUTL-HBCOM GVAC & Solution Hose Set
M097 Motor
VCUTLASS-5 Upper Motor Gasket
Features:
• 1200 Watt Power
• 35L Tank Capacity
• Powerful Pump
- 48 watt
- 5 bar spray pressure
- 0.65L/min spray rate
• Seperated Pump Control
• Upholstery Spray Nozzle
• 3.5m Solution Hose
• 10 Metre Lead
• 12L Removable Solution Tank
• Heavy Duty Rubber Rear Wheels
• 58 Litres Per Second Airflow Rate
• Light - only 17kg
• Quiet - only 62dbA
Comes with:
• 3 Metre Vacuum Hose
• 2 x Suction Tubes
• Hard Floor Brush
• Squeegee Floor Tool
• Upholstery Tool
• Hand Spray Tool
• Dusting Brush
• Crevice Tool
• Solution Hose
AF1086S Synthetic Dust Bags Optional (sold seperately):
Machine & Vacuum Tools with Extraction
Upholstery Tool
1-Jet Floor Wand Model:
Machine & Vacuum Tools with Extraction
Upholstery Tool & S/Steel
GH2505327 Bypass Motor
AF1086S Synthetic Dust Bags (5-pack)
FULL SPARE PARTS & ACCESSORIES
#1 T1-14 On/Off Switch
#2 GH2506269 Pump On/Off Switch
#3 GH6687204 Handle
#14 GH2506003 Pump
#20 GH2519155 Chemical Hose Female Connector
#21 GH6618104 Top Cover Internal Housing Ring
#22 GH2502511 Top Motor Gasket
#23 GH2502513 Mid Motor Gasket
#24 GH2505327 Motor
#25 GH2502516 Bottom Motor Gasket
#27 GH3000129 Exhaust Filter
#29 GH2207750 Exhaust Grill
#33 GH3005008 Motor Wiring
#37 GH3000128 Motor Firelfex
#38 GH3000130 Poly Motor Fireflex
#39 GH6004134 Motor Base
#40 GH2502405 Motor Base Seal
#41 GH6101100 Float
#42 GH2000090 Cage
#45 GH6100019 Tank Clip
#49 GH3470010 Water Reservoir
#56 GH2502552 Machine End Tank Seal
#57 GH3447000 Tank
#58 GH6000203 Tank End Set
#59 GH6632024 Tank Base
GH3000129 Exhaust Filter
DBR036 Dusting Brush
GH7180085 Complete Upholstery Tool
GH6470030 Complete Solution Hose
GH6730000 Cloth Filter Bag
CT036 Crevice Tool
GH6010650 Complete Vacuum Hose Assembly GH2511500 Vacuum Rod
#60 GH2510159 Front Swivel Wheel
#63 GH2510052 Rear Wheel
#64 GH2510053 Rear Wheel Cover
#65 GH2510033 Lock for Rear Wheel
#72 GH2508833 Rivet
#76 GH2504886 Tank Bracket
#77 GH2504275 Handle for Trolley
#78 GH6493119 Water Tank Hose
#82 GH3000231 Rubber Seals (10pk)
#85 GH2601087 Male Coupling Upholstery Tool
#87 GH7180085 Complete Upholstery Tool
#88 GH6470030 Complete Solution Hose
#94 GH2601049 Male Coupler Black Solution Hose
#96 GH2512550 Clip Male Coupler
#97 GH2601048 Female Quick Connect Blk Solution Hose
#101 GH6470000 Top Cover & Fireflex
#105 GH2000095 Bag Support
#107 GH6010340 Complete Drain Hose Set
#111 DBR036 Dusting Brush
#112 CT036 Crevice Tool
#115 GH2511500 Vacuum Rod
#114 GH6010650 Complete Vacuum Hose Assembly
#119 GH6730000 Cloth Filter Bag
#120 AF1086S Synthetic Dust Bags 5pk
# V-M9P-WAND 1-Jet Classic Wand
• 80 Litre Capacity Extractor
• Wet and Dry Vacuum
• Stainless Steel Tank
• Twin Motor (2000 Watt)
• Comes with Stainless Steel Extraction wand (250mm head width)
• Upholstery Tool (85mm head width)
• Dump Valve, drainage hose
• 20 Litre solution tank
• 2.5 Metre long hose
SPARE PARTS & ACCESSORIES
VC80LX-1 Large Handle
VC80LX-12 Switch Red
VC80LX-16 Main Pump
VC80LX-SOL Solution Hose
M031 Bypass Motor
VC80LX-UPHOL Upholstery Tool
Sold Individually
FTC140D Dry Hard Floor Brush
CSW040U S Wand (Upper tube)
AF1086S Synthetic Dust Bags (5-pack)
VC80LX-HOSE or HBCOM-40 Vacuum Hose
CSW040L S Wand (Lower tube)
FTC140W Wet Squeegee Floor Tool
VC80LX-13 Quick Connector (on lid) Solution Hose
VC80LX-16 Main Pump
VC80LX-20191816 33cm Solution Hose for Trigger w/ ends
VC80LX-33 Sponge
VC80LX-37 Floating Ball
VC80LX-38 Windshield
VC80LX-39 Dust Isolator Support
VC80LX-42 Outlet Fork
VC80LX-43 Dirty Water Hose
VC80LX-4567 Solution Hose Connector Set
VC80LX-47 Silicone Pipe Connector
VC80LX-48 Brass Connector
VC80LX-49 Water Tank
VC80LX-58 Large Machine Handle
VC80LX-60 Large Machine Front Wheel
VC80LX-61
VC80LX-62
Large Machine Straight Leg
Large Machine Rear Wheels
VC80LX-CONF Female Connector
VC80LX-WAND Complete Floor Wand
VC80LX-CONM Male Connector
VC80LX-HOSE Complete Hose
VC80LX-OUTPUMP Outward Pump Hose
VC80LX-PUMPH Complete Pump Hose
VC80LX-SOL Complete Solution Hose / Ends 3.2m
VC80LX-TANKH Water Tank Hose
VC80LX-TRIG Trigger Assembly (Wand)
VC80LX-TROLLEY Complete Trolley
VC80LX-UPHOL Complete Upholstery Tool
VC80LX-WAND Complete Floor Wand
HBCOM-40 Vacuum Hose M031 Vacuum Motor
AF1086S Synthetic Dust Bags 5pk 10-0607 Nozzle T-Jet Brass 11002
ME30/60 Hose Machine End
VC30L-27
CSW040U
CSW040L
FTC140W
FTC140D
Tank End Fitting
Upper S Wand
Lower S Wand
Wet Squeegee Floor Tool
Dry Floor Tool/Brush
• Overlap in welded head to vacuum tube for smooth vacuum flow and superior strength
• Stainless steel solution lines
• ‘Soft Opening’ control valve
• Brass angle valve
• Oval hand grip
• Full flow vacuum tube
• Precision 11003 nozzle (# 10-0626)
• Splashguard
• 1.5” Diameter Tube
• Single Bend
• 12” Head Width | 62” Height
Part No: CWCE-1JET
• Low Profile design to get under low furniture - only 4” high at the head
• 2-jet nozzle position is at 45 deg. angle to the carpet to lift dirt out
• Advanced control valve with ‘soft opening’ feature
• Light weight - approx. 3.2kg
• Stress-free oval shaped aluminum grip
• Stainless steel solution tube
• Full flow vacuum extraction
• Precision 11003 nozzles for best performance (# 10-0814)
• 1.5” Diameter Tube, Double Bend
• 12” Head Width
Part No: LPCE-2JET
• Higher profile design 5.6” high
• 2-jet design uses standard V-jets (9502)
• Side splashguards help to contain overspray
• Overlap in welded head to vacuum tube for smooth vacuum flow and superior strength
• Advanced control valve with ‘soft opening’ feature
• Stress-free oval shaped aluminum grip
• Stainless steel solution tube
• Brass angle valve
• Full flow vacuum extraction
• Precision 9502 nozzles for best performance (# 10-0815)
• 1.5” Diameter Tube
• Double Bend
• 12” Head Width
• 62” Height
Part No: CWCE-2JET
• Low Profile for cleaning under low furniture - only 3.6” high
• Angled nozzles to ‘lift dirt out’ of carpet
• Advanced control valve with ‘soft opening’ feature
• 4-jet wand for even spray pattern
• All stainless steel
• Stress-free oval shaped aluminum grip
• Stainless steel solution tube
• Full flow vacuum extraction
• Precision 9501 nozzles for best performance (# 10-0816)
• Splashguard
• 62” Height Manifold for LPCE-4JET 10-0547
• 1.5” Diameter Tube, Double Bend
• 12” Head Width | 62” Height
Part No: LPCE-4JET
Attach to bottom of wand to glide over tile or stone. Also helps wand glide more smoothly over carpet.
SUITS: 1 JET & 2 JET CLASSIC WANDS (CWCE-1JET, CWCE-2JET) 12” Width
Part No: 60-0213
SUITS: 14” WANDS (WTM-14 & 10-0549)
Part No: 10-0893
SUITS: WANDS (WTM-12 & LPCE-4JET) 12” Width
Part No: 10-0891
Part No: UTCE
4” UNIVERSAL DETAIL TOOL
• Forged brass control valve, rated at over 1200 PSI, with exclusive ‘soft-opening’ feature
• Vinyl covered handle for stress-free handling
• High pressure flex line with quick connect included
• Polished stainless steel construction & brass connectors
• Single Brass 1/8” 9502 nozzle (# 10-0923)
• Brass offset valve
• 1.5” Diameter Tube | 4” Head Width |11” Length
Part No:
UTCE-3
4” UNIVERSAL DETAIL TOOL with INTERNAL SPRAY NOZZLE VACUUM RELEASE
Same as above (UTCE) but also includes:
• Internal Spray Nozzle
• Vacuum Release
Nozzle Tube Assembly for UTCE-3
Bleeder Valve for UTCE-3 10-0087 10-0058
UPHOLSTERY / DETAIL TOOLS (cont’d)
With Splash Guard
Part No:
UTCE-1
4” UNIVERSAL DETAIL TOOL WITH SPLASH GUARD
• Forged brass control valve, rated at over 1200 PSI, with exclusive ‘soft-opening’ feature
• Vinyl covered handle for stress-free handling
• High pressure flex line with quick connect included
• Polished stainless steel construction & brass connectors
• Single Brass 1/8” 9502 nozzle (# 10-0923)
• Brass offset valve
• 1.5” Diameter Tube | 4” Head Width | 11” Length
10-0504 Part No:
10-0504-INT Part No: External Jet Internal Jet
4” CLEAR HEAD DETAIL TOOL
• Polycarbonate Clear Head
• Smooth head design for gentle fabrics
• Clear head so you know when your job is complete
• Forged brass control valve, rated at over 1200 PSI, with exclusive ‘soft-opening’ feature
• Vinyl covered handle for stress-free handling
• High pressure flex line with quick connect included
• Polished stainless steel construction
• Single Brass 1/8” 9502 nozzle (# 10-0923) external
• Brass offset valve
• 1.5” Diameter Tube | 4” Head Width | 12” Length
EXTRACTION UPHOLSTERY TOOL
Suits: GHIBLI M9P
Part No:
GH7180085
SHORT FLEX HOSE TO SUIT UNIVERSAL DETAIL TOOLS
Part No:
FLEX-UTCE
4” PLASTIC EXTRACTION UPHOLSTERY TOOL
• Comes with brass male connector
• Suitable for use with 38mm Hose Cuff (CUFF38) or 38mm GVAC Hose
• Single spray nozzle (# VCUTLASS-NOZZLE)
Part No:
UTCE-4
Made in Italy
EXTRACTION UPHOLSTERY TOOL
Suits: SABRE, SABRE JNR, CUTLASS Carpet Extraction machines
Part No:
UTCE-5
As above As above
Made in Italy
• 2 jet design for wide and even spray patterns
• Single 15 deg bend construction for ease of use
• 18” length to allow cleaning on stairs and tight location such as closets
• Utilises detail tool valve with flexible hose for tight locations
• Ideal for mattress cleaning
• Stainless steel solution tube
• Forged brass control valve, rated at over 1200 PSI, with ‘soft-opening’ feature
• Vinyl covered, oval shaped aluminum adjustable grip
• Polished stainless steel construction
• Splashguard
• Brass offset valve
• Nozzle 9503 (2ea)
• 1.5” Diameter Tube
• 10” Head Width
• 18” Length
Part No: ST-10
Part No: HG-SH
• 2 jet design for wide and even spray patterns
• Double S-bend construction for ease of use
• 29” length to allow upright cleaning on stairs
• Forged brass control valve, rated at over 1200 PSI, with ‘soft-opening’ feature
• Vinyl covered, oval shaped aluminum adjustable grip
• Polished stainless steel construction
• Stainless steel solution tube
• Splashguard
• Nozzle 9503 (2ea)
• 1.5” Diameter Tube
• 10” Head Width
• 29” Length
Part No: ST-1029
4” UNIVERSAL DETAIL TOOL W/1.5” HOSE IN A HOSE
• 1.5" x 10' vacuum hose, with solution hose inside
• Forged brass control valve, rated at over 1200 PSI, with 'soft-opening' feature
• Vinyl covered handle for stress-free handling
• High pressure flex line with quick connect included
• Polished stainless steel construction
• Easy access single nozzle, precise pattern
• Slide valve to help you control the vacuum
• No splashguard
• Brass offset valve
• Nozzle 9502
• 1.5” Diameter Tube
• 4” Head Width
• 11’ Foot Length
• Stainless steel vacuum swivel for trouble free service
• Double seal stainless vacuum swivel with 3 bearings on each side
• Low profile - less than 3” tall
• T-style handle for easy control
• All stainless steel construction
• 1 3/4” flow path for maximum flow
• High pressure all stainless steel valve (rated to 140°C, or 285°F)
• Inlet for 2” hose, will also fit 1.5” hose cuff
• Stainless steel angle valve
• Rotating vacuum bypass near handle for ease of use
• Replaceable floor ring allows use of various floor rings and brushes
• Balanced spin jets for high pressure cleaning
• Vacuum slots at the edge to remove water and debris
• High pressure double bearing and ceramic seal assembly
• Splashguard
• Nozzle 0502 (2ea)
• 2.0” Diameter Tube
• 14” Head Width
• 2.75” Head Height
• 52” Height
* Some light cleaning can occur at 500 to 600 PSI. For good cleaning set the pressure at 800 PSI. Best cleaning occurs at 900 to 1100 PSI. Floor damage can occur above 1200 PSI.
BEARING FOR FLOOR SPINNER TOOL
Part No: 20-0098
• Brush attachment to ensure a clean job
• High pressure double bearing and ceramic seal assembly
• Balanced spin jets for high pressure cleaning
• Nozzles angled toward edge of brush for edge cleaning
• Comfortable High pressure handle grip
• 1.5” flow path for maximum flow
• All stainless steel construction
• Stainless steel angle valve
• Vacuum slots at the edge to remove water and debris
• Inlet for 1.5” Hose
• Splashguard
• Nozzle 0502 (2ea)
• 1.5” Diameter Tube
• 6” Head Width
• 2.75” Head Height
• 10” Height
* Recommended cleaning at 800 to 1000 PSI. If delicate tile and grout then 500 to 600 PSI.
BEARING FOR HAND SPINNER TOOL
Part No: 20-0155
Part No: 10-6201
Nozzle to fit 10-0507 Sprayer
Part No: 10-0712
• Fixed Ratio (4:1) sprayer with hose and spray gun
• High pressure spray gun handle
• High pressure flexible hose
• Quick connect for hose to handle connection
• Designed for ‘two-hand’ operation (hold spray gun in one hand and the bottle in the other)
• Brass quick disconnects
• 100 mesh inline filter
• Cushion grip handle with velcro bottle strap
• Forged brass metering injection block
• Replaceable metering jet and components
Lance for 10-0507 Sprayer
Part No: 10-0644
VALVES
BRASS ANGLE VALVE
Suits: Wands
• Forged brass with soft opening control valve
• 1200 PSI pressure rated
• Universal design, fits PMF, Pro-chem, Kingston, CDI and CMP
Part No: VAL-A
RV-ANG
BRASS OF FSET VALVE
Suits: Upholstery, Detail & Stair Tools
• 200 OS detail valves
• 1200 PSI pressure rated
• Universal design, fits PMF, Pro-chem, Kingston, CDI and CMP
Part No: VAL-O
VALVE TRIGGER KITS
Part No:
RV-ANG
REPLACEMENT VALVE TRIGGER KIT
SUITS: WANDS, ANGLED VALVE & T-810 SPRAYER GUN
BRACKETS
1.5” TUBE BRACKET FOR ANGLE VALVE (38mm) with screws
Suits: Wands
Part No: BRACK38
1.5” TUBE BRACKET FOR OFFSET VALVE
Suits: Upholstery/Detail Tools with screws
Part No: BRACK-O
UTCE-OS
Part No:
UTCE-OS
REPLACEMENT VALVE TRIGGER KIT
SUITS: UPHOLSTERY TOOLS, OFFSET VALVE
KITS & OTHER ACCESSORIES
VALVE MOUNT ADAPTOR KIT
Part No: 20-0059
PMF V1245 UPHOLSTERY VALVE REPAIR KIT
Part No: V1245
BRASS ADAPTOR
Male 1/4” X 1/4” (to fit CON-M/-F to VAL-A)
Part No: 10-0042
BALL VALVE, MINI HEX CHROME 1/4” MXF
Chrome Plated M X F 1/4”
Part No: BALLMF
1/8” NPT Male x 3/16” Tube COMPRESSION FITTING
Suits: Upholstery / Detail Tools
Part No: 10-1055
Check Valve 1/2” Long 1/8” Male x 1.8” Female 1/8 NPT
Part No: 10-0587
1/4” NPT Male x 1/4” Tube COMPRESSION FITTING
Suits: Wands
Used on Wands to attach the Stainless Steel Tube to the Valve and the bottom Nozzle (use with 10-1054)
Part No: 10-1057
Part
T-JET HOLDER, W/FILTER 1/4” NPT
Part No: 10-0586
FILTER ONLY, 100 MESH
Part No: F100
FILTER ONLY W/CHK VALVE, 100 MESH
Part No: FC100
• Will not harm your carpet or lawn
• Telescopic long reach handle
• Easy to use and store
• Strong and durable
• Light weight
Part No: 10-2100
Suitable for both:
ARTIFICIAL LAWN
HAND GRIPS
1.5” BLACK HAND GRIP
Part No: 10-0095
HANDLES DUMP VALVES
2” BLACK HAND GRIP
Part No: 10-0097
1.5” STEEL WAND HANDLE (also suitable for Truckmount Wand WTM-14)
Part No: HANDLE1.5
45 DEGREE DUMP SPOUT
Part No: 20-0664
1.5” VALTERRA BLACK GATE / DUMP VALVES (can be dismantled)
1 x Straight side (front) 1 x Screw side (back)
Part No: 20-0665
Part No: 20-1005-1 2 x Straight sides (front & back)
LOCKING NUT FOR BLACK GATE / DUMP VALVE
Part No: 20-0580
1.5” EXTERNAL GASKET BLACK (suits Valterra Black Gate / Dump Valves)
1.5” GATE VALVE SEAL RING KIT
Part No: 20-0582
Part No: 20-0579
SHANGHAI AMETEK 240V 2 STAGE TANGENTIAL - 1100 watt (3.5amp)
Part No: M032
APPROXIMATE MEASUREMENTS ONLY
Height: 170mm
Base height: 71mm Diameter: 145mm 119625
1100 WATT 2 STAGE TANGENTIAL MOTOR
Part No: M032C
TO SUIT:
Various Carpet Extraction Machines & Ducted Vacuum Systems
Height: 170mm
Base height: 58mm Diameter: 145mm
1200W 3 STAGE TANGENTIAL
Part No: M059
116859-13
SUITS: Polivac Predator MKII, MKIII
AMETEK 3 STAGE BYPASS PERIPHERAL 1500 WATT MOTOR
Part No: VSABRE-37-NEW
NEW 2023 UPGRADED VERSION MOTOR to suit: SABRE Carpet Extraction Machine (VSABRE), Serena Silent
4.5-5amp
Height: 199mm
Base height: 92mm Diameter: 145mm
Height: 195mm
Base height: 90mm Diameter: 145mm
NOTE: If you are replacing the motor in an older model Sabre machine, you will need to purchase the following parts to convert it with the newer style motor: VSABRE-37-NEW, VSABRE-36-NEW, VSABRE-39-NEW, VSABRE-1322.
SHANGHAI AMETEK 1400W - 2 STAGE BYPASS
SUITS: PULLMAN PV9, PV11, PV14; CONTRACTOR CV3; NILFISK BV1100 BACKPACK; ORIGIN BV200 BACKPACK; FESTO CT33; WAP & STIHL; SANTOEMMA SABRINA,SABRINA-MAXI; STIHL SE100
CLEANSTAR CUTLASS, SABRE JUNIOR EXTRACTION MACHINES
Part No: M097
122326-00
Height: 173mm
Base height: 69mm Diameter: 145mm
*** See MOTORS section of this catalogue for full range of motors available.
HG38 G-CUFF 38mm - 15 metres GREY
HG38 O-CUFF 38mm - 15 metres ORANGE
HG51 G-CUFF 51mm - 15 metres GREY
HG51 O-CUFF 51mm - 15 metres ORANGE
WITH BRASS CONNECTORS
3000 PSI - Braided inside TEMPERATURE RATING: -40ºC to 150ºC
Black or Grey - depending on stock availability SWIVEL
Part No:
HOSE CUFF - 38MM CUFF38
NOTE: SCUFF51 is the only hose cuff that suits HB51 hose.
1.5” (38mm)
COOL CUFF LATCH SET
Part No:
AH125
2.5” COOL CUFF SWIVEL SET
Part No:
AH144
2” X 1.5” ADAPTOR
2” (51mm) x 1.5” (38mm) Barb Coupling, PVC
Part No: ICUFF3851
1.5” X 1.5” ADAPTOR
1.5” x 1.5” (38mm)
Barb Coupling, PVC
Part No:
ICUFF38
2” X 2” ADAPTOR
2” x 2” (51mm)
Barb Coupling, PVC
Part No:
ICUFF51
2” (51mm) Threaded x 1.5” (38mm) Slip Cuff
Part No: REDUCER CUFF
1.5” (38mm) Threaded x 2” (51mm) Slip Cuff 10-0989
Part No: EXPANDER CUFF
10-0986
Part No: AQT-120
120 PSI PRESSURE SWITCH 1.3 GPM 4.92 L p/min
SPARE PARTS
FEATURES:
LOWER HOUSING ASSEMBLY
Part No:
AQT-LHAK
VALVE HOUSING ASSEMBLY
Part No:
Part No: AQT-220
220 PSI PRESSURE SWITCH
1.4 GPM
5.3 L p/min The highest available on a diaphragm pump
• Patented triple bypass design
• 3 chamber nylon housing, viton valves, santoprene diaphragm
• PM non-ventilated motor
• RFI/EMI filtered 230 volt motors
Part No: AQT-UHAK120 (120 PSI MODEL)
Part No: AQT-UHAK220 (220 PSI MODEL)
AQT-VAK-220 60/120 PSI 220 PSI
UPPER HOUSING END BELL
AQT-VAK Part No:
AQT-EBAK
PRESSURE SWITCH
Part No: AQT-PS-60 (60 PSI MODEL)
Part No: AQT-PS-120 (120 PSI MODEL)
Part No: AQT-PS-220 (220 PSI MODEL)
• SELF PRIMING & CAPABLE OF BEING RUN DRY.
• PATENTED TRIPLE BYPASS DESIGN. 3/8” FPT PORTS.
• HIGHER OPERATING TEMPERATURE OF 170 DEG F MAX.
TECHNICAL NOTES:
Use a 500 psi + hose for the internal plumbing and the external solution hose assembly if the 220 psi pump model is used. The pressure regulator is not required when replacing a PUMPTEC unit.
Please note: It is necessary to pre-spray before carpet extraction to avoid warranty issues with all Cleanstar / Flo-Star Extraction products. Chemicals must not be used through the machine.
PUMP EP77 - 230v 50Hz 28W
Suits: Ghibli M9P; Cleanstar BSE3IN1 Carpet Extraction Machine; Pullman / Wertheim SEM1200, SEM1600; Kerrick Lava...and some Coffee Machines
Part No: GH2506003
PUMP to suit:
VSABRE (Serena Silent) and VCUTLASS (Sabrina Maxi) Carpet Extraction Machines
130 PSI
Part No: VSABRE-68A
PUMP to suit:
VSABRE-JR (Sabrina) Carpet Extraction Machine
60 PSI
Part No: VSABRE-JR-PUMP
PUMP to suit:
EX-FACTOR VC80LX Carpet Extraction Machine
Part No: VC80LX-16
WATER PUMP ASSEMBLY to suit: P50 Carpet & Spray Extractor
Part No: V-P50-180
• MICRO -TUBE PATENTED TECHNOLOGY that allows pore opening when in contact with urine, releasing a much stronger fragrance due to warmth generated with plastic
• Avoids annoying splashing inside and out the urinal
• Unique DRAINING system in every microtube leaving the screen residue-free
• Formula containing ENZYMES preventing malodors
• Prevents passage of debris such as cigarette butts, chewing gum, etc
FRAGRANCES
PRIVATE LABEL ALSO AVAILABLE
# UR-MANGO-10 (10pk)
# UR-MELON-10 (10pk)
# UR-CITRUS-10 (10pk)
# UR-LAVENDER-10 (10pk)
# UR-MINT-10 (10pk)
# UR-OCEAN-10 (10pk)
# UR-APPLE-10 (10pk)
Fragrance lasts for up to 30 days
Sold as CARTONS of 250 per fragrance • Low cost range
Freshens the urinal and reduces cleaning frequency
# UM-OCEAN-250
# UM-LEM-250
# UM-STR-250
# UM-TANG-250
# UM-LAV-250
• Clip On made with a powerful fragrance to scent continuously, leaving an odor free environment.
• Produced with an innovative design, which is easily adapted anywhere you want the Freshener: closet, toilet, bathroom, car, etc
Non-Para Large Urinal Blocks - Citrus 12-pack
• 86 grams - 6.5cm Diameter
• Does not evaporate with air, acts only with water
• Contains enzymes & soap that help clean the urinal
• Prevents stains & bad odours
• Not hazardous (non PDCB)
• Longer lasting
12 PACK
Part No:
Urinal Block & Cage - Cherry 12-pack
Part No: 12 PACK
URCG-CHERRY-12
Flat Urinal Screens - Cherry 12-pack
Part No: 12 PACK
URFL-CHERRY-12
Blue In-Tank Toilet Bowl Cleaner Tablets
3 Tablets per pack / 12-pack
• Cleans with every flush
• Prevents stains
• Leaves a fresh scent and nice blue colour with every flush
• Lasts up to 4 weeks
• Handy hangsell blister pack
• Features an innovative active enzyme system which is most effective in preventing bad odours and stains
Part No:
12 PACK
3 tablets per pack
Non-Para Urinal Freshener Crystals / Chunks
40 Tablets per bottle / 4-pack
• 750 gms
• Crystals do not evaporate with air, since they act with water only
• Contains enzymes that help clean and deodorise the urinal
• Good for one month’s supply
• Crystals can also be used with our Flat Urinal Screens for extra effect
Part No:
Only a few crystalsSuperneeded Concentrate
4 tubs per PACK
Non-Para Toilet Rim Cage - Pot Pourri
12-pack
• Continuous fragrance and cleanliness in every flush
• Practical closed basket easily adapts to your toilet
• Does not evaporate with air, acts with water only
Part No:
TRC-BLUE-12
12 PACK
• Hygienic silicone
• Flexible toilet cleaning under the rim
• Easily manoeuvrable
• Durable brush
• Easy to keep clean compared to standard toilet brush
• Used for multipurpose cleaning like toilets, bathrooms, sinks, ceramics, plastics, glass surfaces and more
EASY TO STORE & USE. Remove the inner drain canister to remove excess liquid to keep it hygienic.
• 75% Alcohol
• 1,200 wipes per roll (2 x rolls)
• Individually packaged
• Spunlace 40gsm material
• Wipe size: 20cm x 15cm
• Weight: 6kg
• Gym Wipes
# WIPES-1200
For use with Freestanding Wet Wipes Dispenser Stand (DISP003)
DISPENSER STAND + BIN
• Stainless steel construction
• Large galvanized trash bin with magnetic rear access door
• Easy to replenish (removable lid)
• Height: 90cm
• Colour: Black
• Holds roll of 1,200 wipes
75% Alcohol
• 800 wipes per roll (2 x rolls)
• Individually packaged
• Spunlace 40gsm material
• Wipe size: 20cm x 15cm
• Weight: 4kg
• Gym Wipes
# WIPES-800
For use with Wall Mounted Wet Wipes Dispenser (DISP004)
• Strong ABS plastic
• Easy to install (incl. fixing hardware)
• Key lockable for security
• Easy to replenish
• Silicon nozzle
• Height: 32cm
• Colour: Black
• Holds roll of 800 wipes
# DISP004
For use with Freestanding Wet Wipes Dispenser Stand (DISP003) Total 2,400 wipes
• Alcohol Free
• 1,200 wipes per roll (2 x rolls)
• Individually packaged
• Cross Spunlace 45gsm
• Wipe size: 20cm x 15cm
• Weight: 6kg
• Gym Wipes # WIPES-NA1200
• Stainless steel construction
• Large galvanized trash bin with magnetic rear access door
• Easy to replenish (removable lid)
• Height: 90cm
• Colour: Black
• Holds roll of 1,200 wipes # DISP003
• Alcohol Free
• 800 wipes per roll (2 x rolls)
• Individually packaged
• Cross Spunlace 45gsm
• Wipe size: 20cm x 15cm
• Weight: 5kg
• Gym Wipes # WIPES-NA800
For use with Wall Mounted Wet Wipes Dispenser (DISP004)
• Strong ABS plastic
• Easy to install (incl. fixing hardware)
• Key lockable for security
• Easy to replenish
• Silicon nozzle
• Height: 32cm
• Colour: Black
• Holds roll of 800 wipes # DISP004
Infrared Sensing
Sensing Range is 0-12cm
Power Supply – 4 x AA Batteries*
Capacity – 1 Litre (1000ml)
Spray Volume – 1.2ml
Easy to open
Available for both Gel or Liquid Sanitiser:
· Metal nozzle for liquids
· Unscrew metal nozzle for gel & soap
Dispenser can be wall mounted
Dispenser only (comes with wall mount)
# DISP002
Full Stand & Dispenser
*Batteries (not supplied)
SPARE PARTS AVAILABLE
Dispenser Nozzle
# DISP002-NOZZLE
PCB Control Board for Dispenser # DISP002-PCB
20ml - 40Opk
# CSHAM-20ML
30ml - 30Opk
# CSHAM-30ML
20ml - 40Opk
# CCOND-20ML
30ml - 30Opk
# CCOND-30ML
20ml - 40Opk
# CBWASH-20ML
30ml - 30Opk
# CBWASH-30ML
20ml - 40Opk
# CBLOT-20ML
30ml - 30Opk
# CBLOT-30ML
20ml - 40Opk
# CSHCOND-20ML
30ml - 30Opk
# CSHCOND-30ML
15 gm - 50Opk
# CSOAP-15G
20 gm - 50Opk
# CSOAP-20G
40 gm - 25Opk
# CSOAP-40G
250pk # CSHOW
Toothbrush
500pk # CTOOTH
100pk # CSLIP
Dishwashing Liquid
30ml - 25Opk
# CDISH
Sanitary Bag
500pk # CSAN
Laundry Liquid
10ml - Sachet
1000pk
# CLAUN-10ML
Dishwashing Powder Sachets
10 gm - 1000pk # CDISHP-10G
Cleanstar
• Eco-friendly
• Made from non-toxic, recycled plastic
• Waste and plastic reduction
• Premium formulations
• Lovely fragrances
Body Wash Pump Bottle
310ml - 50 Pack
# CBWASH-310ML
Hand Wash Pump Bottle
310ml - 50 Pack
Shampoo Pump Bottle
310ml - 50 Pack
# CSHAM-310ML
Body Lotion Pump Bottle
310ml - 50 Pack
Conditioner Pump Bottle
310ml - 50 Pack
# CCOND-310ML
Dishwashing Liquid
Pump Bottle
310ml - 50 Pack
Wall Bracket - Acrylic
For 1 Pump Bottle
# CWALL-A-1 # CWALL-A-3
Wall Mount Brackets
Comeswithscrews,wallplugs,screwdriver &doublesidedtape
Wall Bracket - Acrylic
For 3 Pump Bottles
Comeswithscrews,wallplugs,screwdriver &doublesidedtape
Cleaning Body Soap 100gm - 100 Pack
# CSOAP-100G
• Disposable KN95 Face Masks with Elastic Ear Loops
• Excellent breathability
• High quality and efficiency
• Very Comfortable
50 PACK
5 PACK # MASK50-KN95
• Disposable Kids Face Masks with Elastic Ear Loops
• Box of 50 masks
• 40 Boxes per outer carton (Total 2,000 masks)
• Skin friendly and breathable
• Level 2
• Medical grade
• This mask is entered in th ARTG - No. 334569
• Non-Medical # MASK5-KN95 # MASK50-KIDS
...with Ball Bearing Wheels 32mm & 35mm Floor Tools
Extra38cmWide
FEATURES:
32mm # FTG132-MGP
35mm # FTG135-MGP
...with Ball Bearing Wheels 32mm & 35mm Floor Tools
32mm # FTG132-GP
# FTG135-GP
• Non-scratch rubber wheels with ball bearings for smooth gliding over floor surfaces
• Rubber bumper protector
• Great for edge cleaning
35mm
• 360mm wide
• 32mm or 35mm diameter
• Rubberised non scratch wheels
• Dual lint pickers
• Swivel neck
• Comes with protective storage cover
ENHANCE your productivity by 30% with a wider area of cleaning
(MOQ 1,000 units)
10% MORE DIRT PICK-UP!
DESIGNATION LOW PROFILE FLOOR TOOL - WITH WHEELS
Part No: FTW132-3D 32MM CTN QTY = 25
Part No: FTW135-3D 35MM CTN QTY = 25
• Low Profile Design (fits into tight spaces & underneath low lying objects)
• Soft Non-Scratch Full Rubber Wheels
• Rubber Bumper Protector (protects furniture, skirtings & walls against markings)
• Four Wheeled Base (for easy movement over all floor surfaces)
• Larger Air Intake (10% more dirt pick-up)
• German engineered
RD285 LOW PROFILE FLOOR TOOL - WITH WHEELS
Part No:
FTW132-3
FTW135-3 Part No: 32MM 35MM
CTN QTY = 25
CTN QTY = 25
D272 STANDARD COMBINATION FLOOR TOOL
Part No: Part No:
Part No: FTW132 FTW135 32MM 38MM 35MM CTN QTY = 36 CTN QTY = 36 CTN QTY = 36
FTW138
D306 COMBINATION FLOOR TOOL WIDE PICK UP (32MM) FTW132-1 Part No: CTN QTY = 32 32MM
RD295 SUPREME DELUXE COMBINATION FLOOR TOOL WITH REAR BASE WHEEL - TWO-TONE (32MM)
Part No: FTW132-4 CTN QTY = 20
RD295 SUPREME COMBINATION FLOOR TOOL WITH REAR BASE WHEEL - BLACK ONLY (35MM)
Part No: FTW135-4 CTN QTY = 20 32MM 35MM
D330 TURN & CLEAN HARD FLOOR BRUSH (32MM)
Part No: FTW132-6 32MM
TK286 TURBO NOZZLE
Part No: FTTK132 32MM
Part No: FTTK135 35MM
Cleaning flap for easy cleaning of turbine
TK284 TURBO BRUSH HEAD
Part No: FTTW132 32mm
CTN QTY = 15
Part No: FTTW135 35mm CTN QTY = 15
HARD FLOOR BRUSH WITH WHEELS - SYNTHETIC HAIR (32MM)
Part No: FTWH132-30 30cm WIDE
Part No: FTWH132-36 36cm WIDE
RD300
RD360
CTN QTY = 40
CTN QTY = 25
STANDARD
EXTRA LARGE (XL) LOW PROFILE FLOOR TOOL (WITH WHEELS) - 32MM
• Large 360mm head width
• Dual lint pickers
• Swivel neck
• Strong rubberised non-scratch wheels
Part No: FTXL132
LOW PROFILE FLOOR TOOL (WITH WHEELS) - 32MM
• Soft front & rear squeegee blade
• Rubber wheels
Part No: FTS132-3 CTN QTY = 20
COMBINATION FLOOR TOOL - 32MM
Part No:
FTB132
CTN QTY = 30
HARD FLOOR BRUSH WITH WHEELS (HORSE HAIR) - 32mm
Part No: FTBH132 30CM LONG
Part No:
FTBH132-2 36CM LONG
FTBH ALSO AVAILABLE IN 35mm
CTN QTY = 25
CTN QTY = 25
HARD FLOOR BRUSH WITH WHEELS (SYNTHETIC HAIR) - 32mm
Part No: FTSH132 30CM LONG
TURBO BRUSH FLOOR HEAD - 32MM
Part No: FTTB132
CTN QTY = 20
CTN QTY = 25
HARD FLOOR BRUSH - 32mm WITH SYNTHETIC HAIR & WHEELED BASE (34cm WIDE)
GH6010040
Part No: 34cm WIDE
MULTI-PURPOSE FLOOR TOOL HOUSING - 32MM
Part No:
FTH132
Interchangeable necks available 32/35/36mm
NOTE: Squeegee and Brush inserts are no longer available
GREY COLOUR RANGE (Great for use with Ducted Vacuum Systems)
HARD FLOOR BRUSH TURNS 180 DEGREES - 32MM
FTBH132G-180
Part No: CTN QTY = 25
CTN QTY = 100 NO WHEELS
DUSTING BRUSH WITH HORSEHAIR - 32MM
Part No:
DBB032G
HARD FLOOR BRUSH - 32MM SWIVELS 180 DEGREES
Part No:
FTBH132G-180
CTN QTY = 25
SEE THE DIFFERENCE BETWEEN THE SWIVEL AND THE NORMAL HARD FLOOR BRUSH!
NORMAL HARD FLOOR BRUSH MANOEUVRES EASILY TO REACH TIGHT PLACES
DESIGNED
CARPET SIDEWINDER TOOL - 15”
• Patented Swivel Design
• For use on Carpets
Unique neck design allows access to tight spaces where normal floor tools can’t easily access.
• Patented Swivel Design
• For use on Hard Floors
TOOL - 15”
Unique neck design allows access to tight spaces where normal floor tools can’t easily access.
EXTRA LARGE (XL) LOW PROFILE FLOOR TOOL (WITH WHEELS) - 35MM
• Large 3600mm head width
• Dual lint pickers
• Swivel neck
• Strong rubberised non-scratch wheels
Part No: FTXL135
HARD FLOOR BRUSH WITH WHEELS - 35mm WITH HORSE HAIR
FTBH135 Part No: CTN QTY = 25
FTBH135-2
Part No: CTN QTY = 25 30cm Head Width 36cm Head Width
COMBINATION FLOOR TOOL - 35MM
Part No: FTB135 CTN QTY = 30
CLEANSTAR TURBO BRUSH HEAD - 35MM
Part No: FTTB135 CTN QTY = 20
EUROPEAN COMMERCIAL
COMBO FLOOR TOOL BLACK - 36MM
FTB136
Part No: CTN QTY = 25
EUROPEAN COMMERCIAL - HOUSING & INSERTS
MULTI-PURPOSE FLOOR TOOL HOUSING - 38MM
Part No:
FTH138
NOTE: Squeegee and Brush inserts are no longer available
CARPET INSERT FOR FTH138 MULTI-PURPOSE FLOOR TOOL
Part No:
FTH138-3
STANDARD
WESSEL-WERK COMBO FLOOR TOOL BLACK - 38mm
Part No:
FTW138
AIR DRIVEN
TK286 TURBO BRUSH HEAD
Part No:
FTTK132
Part No: FTTK135 32MM 35MM
TK284 TURBO BRUSH HEAD
Part No: FTTW132 32MM
Part No: FTTW135 35MM
CTN QTY = 15
CTN QTY = 15
CLEANSTAR TURBO BRUSH HEAD - 32MM & 35MM
Part No:
FTTB132
Part No:
FTTB135
CTN QTY = 20
CTN QTY = 20 32MM 35MM
HANDHELD TURBO BRUSH - 32MM
FTTH132 Part No: 32MM
HEAVY DUTY FLOOR TOOLS
40cm WIDE COMMERCIAL FLOOR TOOL WITH WHEELS COMES WITH
FTEC132-1
Part No: FTEC135-1
Part No: Part No:
Part No: FTEC151-1 40cm wide
Part No: FTEC136-1 36MM
FTEC138-1
Part No: FTEC-WET
Part No: FTEC-BRUSH EXTRA INSERTS (come in Pairs)
Squeegee Blades (pair)
Brush Strips (pair)
45cm WIDE COMMERCIAL FLOOR TOOL WITH WHEELS REINFORCED STAINLESS STEEL & HEIGHT ADJUSTER COMES WITH INTERCHANGEABLE SQUEEGEE BLADES & HARD FLOOR BRUSH STRIPS
Part No: Part No:
Part No: Part No: FTEA132 FTEA135 FTEA138 FTEA151
Part No: 36MM FTEA136
Part No: FTEA-WET
Part No: FTEA-BRUSH EXTRA INSERTS (come in Pairs)
Squeegee Blades (pair)
Brush Strips (pair)
Suits VC30L, VC60L & VC90LP
Cleanstar Commercial Wet ‘n’ Dry Machines
FTC140D Part No:
Part No: with wheels
FTC140D-WLS
TO BE USED WITH ‘S’ WANDS (CSW040U & CSW040L)
WET / SQUEEGEE FLOOR TOOL
Suits VC30L, VC60L & VC90LP
Cleanstar Commercial Wet ‘n’ Dry Machines
FTC140W Part No:
REPLACEMENT PAIR OF SQUEEGEE STRIPS FOR FTC140W
Part No:
FTC140W-INSERT
NOTE: These Squeegee Strips only suit the regular FTC140W floor tool
COMMERCIAL WAND & FLOOR
TOOL KIT - 38MM
BOXED - includes:
1 x BCP038 (Curved Wand)
1 x FTEC138-1 (Commercial Floor Tool) 1 x RCS038 (Chrome Rod)
Part No:
KIT-COM38
CARPET TURNOVER TOOL - 32MM
Part No: FTLCB132
Part No: DMOP-R-INS Red
For previous models sold
TO SUIT ITALIAN RANGE OF HEAVY DUTY FLOOR TOOLS (FTE, FTH, FTEC, FTEA)
NECK / ELBOW TO SUIT
EUROPEAN FTE FLOOR TOOL SERIES 32mm, 35mm & 36mm
ELB32 Part No:
ELB35 Part No:
ELB36 Part No: 32mm 35mm 36mm
NECK / ELBOW TO SUIT
EUROPEAN FTH FLOOR TOOL SERIES 32mm & 35mm
FTELB32 Part No:
FTELB35 Part No: 32mm 35mm
NECK RING TO SUIT
EUROPEAN NECK/ELBOW (see above) Suits: ELB & FTELB
Part No:
RING-NECK
NECK/ELBOW TO SUIT
FTEC & FTEA FLOOR TOOL SERIES
NECK32 Part No:
NECK35 Part No: 32mm 35mm
NECK36 Part No:
NECK38 Part No: 36mm 38mm
NECK51 Part No: 51mm
REPLACEMENT RING FOR NECK
FTEAC-RING Part No:
ADAPTOR REDUCER
Part No:
Suits 35mm Neck to 32mm Rod ADAP2
ADAPTOR INCREASER
32mm Neck to 35mm Rod
ADAPTOR INCREASER
32mm Neck to 38mm Rod
Part No:
ADAP5
ADAPTOR REDUCER
36mm Neck to 35mm Rod
Part No:
ADAP7
UNIVERSAL ADAPTOR FOR 32mm FLOOR TOOLS
(Universal adaptor to connect your standard 32mm floor tool to rods/wands ranging from 28mm up to 38mm) ADAP-UNI Part No:
POWER TOOL ADAPTOR
- For use with most Dust Extractors and Cleanstar Epic (VEPIC)
• Designed for use with most vacuum cleaners (32mm compatible)
• Allows operator to vacuum in a ‘side-to-side’ mopping motion using both hands whilst standing upright
• Cuts vacuuming time by half
• Saves time, money and energy use
• Boost productivity and profits
• Robust design - engineered to withstand the rigours of commercial cleaning
• OH&S benefits - improves posture, reduces strain, Fatigue and injury
• Dual counter-rotating brush system
• Central swivel joint with 360-degree range of motion
• 2-speed brush control
• Suitable for both carpets and hard floor surfaces
• Long life rechargeable battery - up to 3 hours run time
• Doubles as a cordless sweeper with easy to empty dust collection tray
• Designed and Engineered in Australia
• A must have for every commercial cleaner!
Part No: ACTIV8
ACTIV8-ADAP Charger 24V - 1.2 A
ACTIV8-BCOV Bottom Cover
ACTIV8-MEDIUM
Medium Bristle
Roller Brushes (Pair) RED
ACTIV8-CUT Hair Cutter/Brush
ACTIV8-PCB Main PCB
ACTIV8-ROD2 32mm Straight Rod (Lower)
ACTIV8-BALL Teflon Ball
ACTIV8-CAP Red Sweeper Cap
ACTIV8-SOFT
Soft Bristle
ACTIV8-BALLCAP Cap for Teflon Ball
ACTIV8-CUFF 32mm Hose Cuff
Roller Brushes (Pair) BLACK
ACTIV8-MOT Motor & Gearbox Assembly
ACTIV8-PEDAL On/Off Button
ACTIV8-TRAY Complete Tray Arrangement
ACTIV8-HARD
Hard Bristle
Roller Brushes (Pair) BLUE
ACTIV8-NECK
Complete Neck with Hose & T Piece
ACTIV8-ROD1 32mm Telescopic Rod (Upper)
ACTIV8-SWITCH On/Off Switch
ACTIV8-TCOV Top Cover
BELTWW - CLEANSTAR POWERHEAD (PHCS)
VWASS-60 - CLEANSTAR WASSUP UPRIGHT
C17-36-46 - CLEANSTAR COMBIVAC UPRIGHT
MSWEEP-BELT - CLEANSTAR MANUAL SWEEPER
VMEDUSA-12 - CLEANSTAR MEDUSA SWEEPER
BELTE - Z500, Z502, Z504
BELT115 - ZE3B
BELT115 - SENTRIA, TRADITION, HERITAGE 1 & 2, LEGEND, GENERATION SERIES 3, 4 & 5, G10, G10e, G SERIES
BELT-SH2 - SHARK ROTATOR PROFESSIONAL LIFT-AWAY NV500
BELTWW - TORNADO PB007
BELT-FTTW - TK284 TURBO HEAD (FTTW132 & FTTW135)
PH-EBK340-BELT - EBK340 POWERHEAD
BELT-FTTE132 - EUROPEAN TURBO HEAD (FTTE132)
BELTCAT - TURBOCAT (FTT132-1)
BELTWW - CLEANSTAR, WHIRLWIND, TORNADO & OPEL POWERHEADS (PHCS)
BELT-FTTW - WESSEL WERK TK284 TURBO HEAD (FTTW132 & FTTW135), PB007 (toothed belt)
PH-EBK340-BELT - WESSEL WERK EBK340 POWERHEAD (PH-EBK340)
PHZEL-BELT - ZELMER POWERHEAD (PHZEL)
C17-36-46 - CLEANSTAR COMBIVAC POWERHEAD (C17-36)
WINGED DUSTING BRUSH WITH HORSE HAIR - 32mm
Part No:
DBW032
CTN QTY = 50
Use as Dusting Brush and Upholstery Tool
ROUND DUSTING BRUSH - STANDARD - 32MM
Part No:
DBB032
CTN QTY = 100
GREY DUSTING BRUSH WITH HORSEHAIR - 32MM
Part No: CTN QTY = 100
DBB032G
CREVICE TOOL - 32MM
Part No: CTP032 CTN QTY = 200
LONG CREVICE TOOL 350MM (35CM LONG) - 32MM
CTP032L Part No: CTN QTY = 125
SWIVEL DUSTING BRUSH - 32MM
DBS032 Part No: CTN QTY = 100
UPHOLSTERY BRUSH WITH LINT PICKERS - 32MM
UBP032 Part No:
COMMERCIAL
CREVICE TOOL - 38MM
GH2511610
COMMERCIAL CREVICE TOOL
TO SUIT: CLEANSTAR VC30L, VC60L & VC90LP; PULLMAN CB30, CB60; GHIBLI; SPITWATER; KERRICK COMMERCIAL
Part No:
Part No: Made by GHIBLI in Italy TO BE USED WITH
COMMERCIAL ROUND DUSTING BRUSH
TO SUIT: CLEANSTAR VC30L, VC60L & VC90LP; PULLMAN CB30, CB60; GHIBLI; SPITWATER; KERRICK COMMERCIAL
Part No:
Part No:
DBB038
Part No: ROUND DUSTING BRUSH ID: 45mm ID: 45mm
DBB050
&
TELESCOPIC CHROME ROD
Part No: RTC032 32mm 35mm
CTN QTY = 30
Part No:
RTC035
CTN QTY = 30
TELESCOPIC ROD WITH PIP - 32mm
Suitable for use with Cleanstar Powerhead (PHCS)
Part No:
RTC032PIP
CTN QTY = 30
PREMIUM CHROME ROD WITH CUFF
Part No:
RCP032
ALUMINIUM STRAIGHT ROD - BLACK
Part No: 32mm
Part No:
(can be used with Sidewinder floor tools)
CHROME ROD WITH CUFF
Part No: RCS035
Part No: 35mm 32mm 32mm
RCS032
Part No: RCS036 32mm 35mm
CHROME ROD
QTY = 50
QTY = 50
Part No: GH2511500
Part No: RCS038 36mm
Part No: RAE032 T1-38
QTY = 40
Suits Ghibli ASL7P & M9P models
QTY = 50
ELECTROLUX LONG ROD - 32mm (ALUMINIUM) 750mm long
PLASTIC STRAIGHT ROD - BLACK (500mm long) 32mm
RPS032
Part No: RAE035
Part No: 38mm 36mm
RPS035 35mm
CURVED WANDS
‘S’ WANDS - With Taper
S WANDS FOR CLEANSTAR COMMERCIAL VC30L, VC60L & VC90LP ALSO SOME PULLMAN, GHIBLI & SPITWATER MODELS - SOLD INDIVIDUALLY
Part No: CSW040U
Part No:
RODS TAPER FROM 38mm to 36mm
CSW040L UPPER LOWER
TO BE USED WITH COMMERCIAL FLOOR TOOLS (FTC140D & FTC140W)
‘S’ WANDS - Non-Taper
Part No: CSW038
‘L’ WAND
(38-38mm) - 2 PIECES
Part No: CSL038 38mm - 2 PIECES
BENT END PIECE - STANDARD PLASTIC WITH HUL & RING
BPB032
Part No: 32MM
36MM BPB035 Part No: 35MM (35mm rod / 32mm hose)
CHROME CURVED WANDS
Part No:
BPB036 Part No: 32MM
BCP032
Part No:
BCP038 38MM
BENT END PIECE WITH CHROME TIP HUL & RING
Part No: BEPC 32MM
ELECTROLUX
ELECTROLUX LONG BENT END PIECE WITH CHROME TIP - 32MM (HUL & RING sold seperately)
USED TOGETHER
(Also used with Sidewinder floor tools)
Part No: BPBLUX
ELECTROLUX LONG ROD (ALUMINIUM) - 32MM 750MM LONG USED TOGETHER
Part No: RAE032 CTN QTY = 50
Part No:
CLICK RING & HUL RING
Part No: 1.2M HB32-1.2
Part No: 1.8M HB32-1.8
Part No: HS32-9
CTN QTY = 76
CTN QTY = 70
Part No: 20M HB32-20 12M
CTN QTY = 3
Part No: HS32-12
Part No: HS32-20 HS32-11 9M
CTN QTY = 7
CTN QTY = 6
CTN QTY = 6
20M
Part No: 11M
CTN QTY = 3
Part No: 9M HBG32-9 12M HBG32-12
CTN QTY = 7
Part No:
Part No: 20M HBG32-20
CTN QTY = 6
CTN QTY = 3
Part No: 5M HB38-5
Part No: 20M HB38-20 BLACK - 38mm CTN QTY = 2
Part No: 2M HB38-32
Ideal for vacuum cleaners that use a 38mm hose or hose cuff, to convert into using 32mm tools and accessories
COMMERCIAL VACUUM HOSE - 51mm (2”)
Part No: HB51-5 2” - 5M
Part No: HB51-15 2” - 15M
NOTE: SCUFF51 is the only hose cuff that suits HB51 hose.
GVAC HOSE - 38mm (1.5”) with Cuffs - 15 Metres
Part No:
GVAC HOSE - 51mm (2”) with Cuffs - 15 Metres
Part No:
WIRE REINFORCED SUCTION HOSE - 38mm Part No: 2.5m for use with Scrubbers
Complete Safety Backpack Hose with 3-Lug Fitting
Suits most PULLMAN, ORIGIN, NILFISK, HAKO Backpacks, etc
# HOCOM1.2
Complete Safety Backpack Hose with Screw Fitting
Suits PACVAC Backpacks
# PV-HOCOM
Complete Safety Backpack Hose for GHIBLI T1
Suits GHIBLI T1 Backpack
# HOCOM-T1
TO SUIT VARIOUS BACKPACKS...
COMPLETE HOSE - BLACK 32mm
HI-VIS NEON ORANGE SAFETY BACKPACK HOSE (COMPLETE) - 32mm Part No:
COMPLETE HOSES TO SUIT:
COMPLETE HOSE TO SUIT V5001 2200WATT Part No: HBCOM-V5001
ALLERGY BAGLESS (VALLERGY) Part No: VALLERGY-55
ALLERGY PRO BAGGED (VALLERGYPRO) Part No: VALLERGYPRO-35
ZEST (1600 WATT)
Part No: VZEST-7
SCHMICK (1800 WATT) Part No: VSCHMICK-35
V2200 (2200 WATT)
Part No: V2200-1
COMPLETE HOSES TO SUIT:
VC15L & VC15LP
Part No: HBCOM-36
BUTLER (VBUT), BUTLER PRO (VBUT-PRO)
Part No: HBCOM-BUT 3M
VC30L, VC60L, VC90LP, VC80LX EX-FACTOR
Part No: HBCOM-40
AS4 HOUSEMAID
VC10LP / VC10LPH
Part No: HBCOM-VC10LP
P50 CARPET & SPRAY EXTRACTOR (V-P50)
Part No: V-P50-345.2
AS5-EVO, HYPERVAC AS5
Part No: HBCOM-AS5
EX-FACTOR VC80LX
Part No: VC80LX-HOSE
SPRiNTUS FLOORY, ERA EVO, ERA PRO
Part No: VERA-114209
EPIC 4M HOSE WITH POWER TOOL ADAPTOR
Part No: PWT-HBCOM
Part No:
EPIC STANDARD HOSE VEPIC-HOSE
VBRO20
Part No: VBRO20L-51
COMBIVAC C17-36
Part No: C17-36-125
COMPLETE HOSES TO SUIT: STARLITE VBK BACKPACK
AEROLITE VBP1400 & VBP-BATT30 BACKPACKS
Part No:
Part No:
1.8 METRE HOSE WITH 3 LUG & LONG BEP (CHROME TIP) FITS 89 TO 745 MODELS
Part No: HBCOM1.8(E)
COMPLETE HOSES TO SUIT: Part No:
COMPLETE HOSES TO SUIT:
Part No: HBCOM-AS5
AS5, AS5-EVO
AS9P, AS12P-CBN
Part No:
GH6010500
ASL7P, M9P
Part No:
GH6010650
M9P Complete Solution Hose
Part No:
GH6470030
AS10, ASL10, WS90, WS90P & WSL
Part No: HBCOM-36
KWSL, WS3M, WD400, AS59, AS59CBE, M26
Part No: HBCOM-40
Z951
GHIBLI T1 BACKPACK STANDARD COMPLETE HOSE
Part No: HBCOM-T1
YELLOW BACKPACK HOSE
Part No: HYCOM-T1
COMPLETE HOSES TO SUIT:
ROCKET VAC XP 1.2 METRE - 32MM
Part No: HBCOM-XP
SUPERVAC 140
Part No: HBCOM-36
SUPERVAC 550
Part No: HBCOM-40
HOOVER COMPLETE HOSE TO SUIT:
HOOVER WORKMAN BACKPACK
ROCKET VAC (OLD STYLE) & SHADOWVAC
HOSE
- 32MM
Part No: 1.2M HBCOM1.2
NILFISK COMPLETE HOSES TO SUIT:
SUPERVAC 50
Part No: HBCOM-AS5
VP300, VP600 More over page...
NILFISK COMPLETE HOSES TO SUIT:
BV1100 BACKPACK (3-LUG) (Made by Origin)
1.2 METRE - 32MM
Part No: 1.2M HBCOM1.2
NUMATIC
3-LUG SUITS: GD934
Part No:
HBCOM-NIL3
2m Tapered Hose only for GD5/GD10 (38mm-32mm)
Part No:
HB38-32
REPLACEMENT HOSE, WANDS & BENT END PIECE KIT TO SUIT NUMATIC MACHINES (HENRY, GEORGE, HETTY, ETC)
Part No:
HBCOM-NUMKIT
Part No: PV-HBCOM NUMATIC RSV130 BACKPACK
NUMATIC NV200, SE250, IC200, NV250, NV350, NV402, HENRY, GEORGE, HETTY, CV370, NVH180, HVR200, HET200P, NQS250B, SSV250, NVQ372, WV380-2
Part No:
HBCOM-NUM
ORIGIN BV100, BV150, BV200, SPRINT BACKPACKS
STANDARD COMPLETE HOSE 1.2 METRE - 32MM
PACVAC COMPLETE HOSES TO SUIT:
PACVAC GLIDE 300 (New Style - screw in machine end)
Part No:
HBCOM-VGLDV2
Part No: HBCOM1.2
SUPERPRO 700 SERIES BACKPACKS AND THRIFT (NEW MODELS) SCREW FIT
STANDARD COMPLETE HOSE 1.2 METRE - 32MM
Part No: PV-HBCOM
PANASONIC COMPLETE HOSES TO SUIT:
Part No:
HBCOM-VP522/524
BACKPACKS, ENVIROVAC, SAFETYPRO, PV2000, OLDER PACVAC PRO SERIES MODELS - 3 LUG
Part No:
PV-HBCOM (OLD)
Part No: POLIVAC COMPLETE HOSES TO SUIT:
Part No: HBCOM1.2CT
HBCOM-VP710/712
Part No: HBCOM1.8
BACKPACKS (MADE BY ORIGIN):
PV5, PV6, PV7, PV9, PV10, PV11, PV12, PV13, PV14, PV15, CONTRACTOR, CV3, JANITOR, JV1, JV2
Part No: HBCOM1.2 Black Hose
PULLMAN ADVANCE COMMANDER PV900 BACKPACK, PULLMAN ADVANCE LITHIUM PL950 BATTERY BACKPACK - 32mm version
Part No: HBCOM-COMM32
HI-VIS NEON ORANGE SAFETY BACKPACK HOSE (COMPLETE) - 32mm
Part No: HOCOM1.2
PULLMAN ADVANCE COMMANDER PV900 BACKPACK - 35mm version
Part No: HBCOM-COMM35
CB15, CB15P, WSL, WS90, WS90P, AS10, ASL10 AS5, AS5-EVO
Part No:
HBCOM-AS5
Part No: HBCOM-36
PULLMAN JANITOR JV500 BACKPACK, PULLMAN PV500 BACKPACK
Part No: VBP5000-HBCOM
CB30, CB60, CB80, PVW300, PVW450, PVW1000, WS3M, AS59, AS59CBE, WD400, AS400
Part No: HBCOM-40
COMPLETE HOSES TO SUIT:
AS5
Part No: HBCOM-AS5
AS10, ASL10, WD151S
Part No: HBCOM-36
SPRINTUS COMPLETE HOSES TO SUIT:
ERA PRO (VERAPRO) ERA EVO (VERAEVO) FLOORY (VFLOORY)
Part No: VERA-114209
SE7 (V-SE7)
Part No:
V-SE7-107012
CRAFTIX 35M (VCRAFT35M)
Part No: VCRAFT35M-118143
COMPLETE HOSES TO SUIT:
COMMERCIAL ADVANCE BACKPACK (VXCB-01)
Sold at Bunnings (Made by Pacvac)
Part No: PV-HBCOM STANDARD COMPLETE HOSE 1.2 METRE - 32MM
AS27, AS400, AS59, AS59CBE, WD301S, WD602S, WD603S, WD902P
Part No: HBCOM-40
WATERKING (V-WKING)
Part No:
V-WKING-109069
N80/2K (V-N80)
Part No: V-N80-102013
N51/1KPS (V-N51)
Part No: V-N51-110049
Part No: VCRAFT35M-102116
Antistatic Hose
ZELMER COMPLETE HOSES TO SUIT:
ODYSSEY V450.OST
Part No: V450-40
Joins 32mm hose to Bent End Piece
CLICK RING & HUL RING
Part No: Part No: USED TOGETHER
ELECTROLUX - MACHINE END SCREW FIT (3-LUG)
Used with 32mm hose USED TOGETHER
RUBBER HOSE END SEAL (to suit MELUX)
MACHINE ENDS
To suit: CLEANSTAR / HAKO / GHIBLI / PULLMAN / SPITWATER
ME-AS5
ME15
ME30/60
SUITS:
CLEANSTAR HYPERVAC AS5, AS5-EVO, HAKO SUPERVAC 50, GHIBLI AS5, PULLMAN AS5, SPITWATER AS5
SUITS:
CLEANSTAR VC15L, VC15LP
GHIBLI/PULLMAN AS10, ASL10, CB15, D40, M9P
HAKO 140, WS90, WSL
SUITS:
CLEANSTAR VC30L, VC60L, VC90LP, VC80LX
GHIBLI AS9, AS12, PULLMAN CB30, CB60, CB80
HAKO SUPERVAC 550
VBUT-ME
VEPIC-ME
SUITS: CLEANSTAR BUTLER (VBUT models), BUTLER PRO (VBUT-PRO)
SUITS: CLEANSTAR EPIC 35L WET & DRY VACUUM (VEPIC)
Used with 32mm hose Used with 32mm hose Used with 38mm hose
GH2511408
SUITS: GHIBLI ASL7P, AS9P, AS12P-CBN
VPAN-A3
SUITS: PANASONIC
MC-CG712, MC-CG710, MC-CG522, MC-CG524
Used with 32mm hose
HOSE MACHINE END TO SUIT: NILFISK GD910, GD1000, GD1005, GD1010, GDS1010, HDS1005, HDS1010, HDS2000
Part No: ME-GD910
GHIBLI T1 BACKPACK - MACHINE END
Part No: T1-28
Used with 32mm hose
HAKO ROCKET VAC XP MACHINE END
Part No: ME-ROCKETXP
Used with 32mm hose HUL & RING sold seperately
NILFISK GD5/GD10 - MACHINE END
Part No: ME-GD5
Used with 38mm to 32mm Taper Hose
SCREW FIT
NUMATIC / PACVAC SUPERPRO 700 SERIES (newer models) - MACHINE END
Part No: ME-PV
Used with 32mm hose
PACVAC (suits older Pacvac Pro Series models) - MACHINE END
90° ANGLE (OLD STYLE)
Part No: ME-PV(OLD)
Used with 32mm hose HUL & RING sold seperately
TANK END
CLEANSTAR HYPERVAC AS5, HAKO SUPERVAC 50, GHIBLI AS5, PULLMAN AS5, SPITWATER AS5
Part No: GH6000204
TANK END
GHIBLI ASL7P
Part No: GH6000206
TANK END
CLEANSTAR VC15LP, VC15L, VC30L, VC60L, VC90LP, VC80LX
Part No: VC30L-27
TANK END
GHIBLI M9P, AS9P, AS12P-CBN
Part No: GH6000203
SLIP CUFF - BLACK or GREY 32mm thread to 38mm
CUFF01
HOSE CUFF - 27MM Suits 27mm Black Hose.
Part No:
CUFF27
CUFF - 32MM
Part No:
Part No: BLACK
CUFF32
HOSE CUFF - 38MM (COMMERCIAL)
To suit Complete Hose for Cleanstar Commercial 30/60/90 Litre Machines
CUFF38C Part No: BLACK
HOSE CUFF - 38MM
Part No:
CUFF38
HOSE CUFF - 51MM
Part No:
CUFF51
BLACK or GREY Depending on stock availability
SWIVEL CUFF
NOTE: SCUFF51 is the only hose cuff that suits HB51 hose. BLACK or GREY Depending on stock availability
SCUFF38 Part No: SCUFF51 Part No: 38MM 51MM
2” X 1.5” ADAPTOR
2” (51mm) x 1.5” (38mm)
Barb Coupling, PVC
Part No: ICUFF3851
1.5” X 1.5” ADAPTOR
1.5” x 1.5” (38mm)
Barb Coupling, PVC
Part No: ICUFF38
2” X 2” ADAPTOR
2” x 2” (51mm)
Barb Coupling, PVC
Part No: ICUFF51
HOSE JOINER
HJ32
Part No: REDUCER CUFF
2” (51mm) Threaded x 1.5” (38mm) Slip Cuff
10-0989
Part No: HJ51
Part No: 32MM 38MM 51MM
Part No: HJ38
EXPANDER CUFF
1.5” (38mm) Threaded x 2” (51mm) Slip Cuff
Part No:
DUCTED BANDED HOSE CUFF (for Ducted Vacuum Systems)
Part No: HCDUC BLACK
COOL CUFFS
10-0986
NOTE: ALL OF OUR ELECTRICAL LEADS HAVE 10 AMP PLUGS & SOCKETS 3m 10amp-2 core HEAVY DUTY 3m 10amp-3 core HEAVY DUTY
Part No:
Part No:
AMP 9m 7.5amp - 2 core (FLAT LEAD) CR9-2FLAT 10 AMP
Part No:
Part No:
Part No:
Part No:
15 AMP FOR RETRACTABLE CORD MACHINES
Part No:
Part No:
CR10-2 10m 7.5 amp - 2 core (CIRCULAR)
CR1810-2
CR2010-2
CR1510
CR2010-3
CR1515
CR2015 15m 10amp-3 core 20m 10amp-3 core 18m 10amp-2 core 20m 10amp-2 core 15m 15amp-3 core 20m 15amp-3 core
QTY = 5
CTN QTY = 4 15 Amp Heavy Duty Cable with 10 Amp Plugs
POWER TOOL REPAIR LEADS
Part No:
Part No: CR310-2 3m 10amp-2 core
Part No:
CRR2010-3 20m 10amp - 3 core
CTN QTY = 50 (ALL BELOW)
Part No: CR310-2HD CR310-3 CR310-3HD 3m 10amp-2 core HEAVY DUTY
Part No: 3m 10amp-3 core
Part No: CR310-3HD-Grey
Part No: CR310-2HD-Grey 3m 10amp-3 core HEAVY DUTY
SHORT IEC LEAD (to be used with CE1810-YL)
Suits Ghibli T1v3 Backpack
Part No: T1v3-IEC
ORANGE Part No: T1v3-IEC-OR
Use the following two leads together:
Suits various Nilfisk, Origin, Pullman, Tennant V5
Part No: (KC109IEC)
IEC PLUG & SHORT LEAD FOR PACVAC SUPERPRO 700 SERIES BACKPACKS (NEWER VERSION) ALSO SUITS ROCKETVAC XP (3 CORE)
PLUGS & SOCKETS
POWER LEAD SOCKET
IEC SOCKET FOR POWER LEAD
Suitable for: GHIBLI T1v3 BACKPACK MODELS
Part No: T1v3-IECREP
POWER SOCKET FOR PACVAC
SUPERPRO 700 BACKPACK POWER LEAD (MALE)
Available in 2-Pin or 3-Pin depending on stock availability
Part No: KC257-IEC3
POWERHEAD SOCKET
SEE NEXT PAGE FOR SUITABLE MODELS
POWERHEAD SOCKET TO SUIT
GHIBLI TIv2 BACKPACK
with rivets
IEC SOCKET FOR POWER LEAD
Suitable for: Origin, Nilfisk & Pullman Backpacks
Part No: IEC-20203
POWERHEAD SOCKET TO SUIT STRAIGHT PIN PLUGS
Part No: 20015
IEC PLUG POWERHEAD SOCKET OUTLET
SUITS PACVAC & HAKO ROCKET VAC XP
Part No:
IEC-SOCKET
Part No: GH2506175 (KC257)
POWERHEAD PLUGS
IEC 3-PIN MALE POWERHEAD PLUG
Suitable for various Backpacks including Ghibli T1v2, newer Origin, Pullman & Nilfisk models
Part No: IEC-3PIN
IEC 2 PIN PLUG -SUITS PACVAC / HAKO ROCKET VAC XP POWERHEADS
Part No: PV-IEC
POWERHEAD LEADS & SOCKETS
1.35M - Straight Pin Male-Stripped Lead wires into the powerhead PHL1.35
Part No:
Suits various Backpacks and Commercial Vacuums including earlier model Origin, Nilfisk, Pullman, Ghibli, Hako Rocketvac & some Wertheim models (including TB1200, ET1700, ET1800, ET2000, 140, 150, AS3, AS5)
1.7M - Straight Pin Male
Part No: PHL1.7
Suits various Backpacks and Commercial Vacuums including earlier model Origin, Nilfisk, Pullman, Ghibli, Hako Rocketvac & some Wertheim models (including TB1200, ET1700, ET1800, ET2000, 140, 150, AS3, AS5)
1.4M - Powerhead Lead (IEC 3-Pin Male) connects to PHL1.35 from powerhead
Suits various Backpacks including GHIBLI T1v2, newer Origin, Pullman & Nilfisk models 3-PIN
Part No: T1-PHL
Part No: PHL-PV
Works with POWERHEAD SOCKET TO SUIT STRAIGHT PIN PLUGS
Part No: 20015
Works with POWERHEAD SOCKET TO SUIT GHIBLI TIv2 BACKPACK
Part No: GH2506175
1.4M - Powerhead Lead to suit: PACVAC SUPERPRO 700 SERIES, HAKO ROCKET VAC XP, PULLMAN PC9
Part No: PHL-ELX
Part No:
Works with IEC PLUG SOCKET OUTLET IEC-SOCKET
Part No: PHL-FIG8
4m Powerhead Lead Fig 8 to suit: some Nilfisk models
MALE PLUG - 10 AMP
Part No:
PLUGM
NEW STYLE PACVAC SUPERPRO BACKPACK CORD RESTRAINT (with Carabiner)
Also suits Cleanstar VBP5000 Backpack
Part No: PV-CREST2
RUBBER GROMMET CABLE PROTECTOR
Part No: GROMMET
Part No: T1-4 GROMMET CABLE PROTECTOR FOR GHIBLI T1 BACKPACK
Part No: PV-CREST BACKPACK RUBBER CORD RESTRAINT
RESIDUAL CURRENT DEVICES (RCD’s)
Residual Current Devices (RCDs), commonly referred to as ‘safety switches’, are electrical safety devices designed to immediately switch off the supply of electricity when electricity leaking to earth is detected at harmful levels. RCDs offer high levels of personal protection from electric shock.
From 1 January 2013, new legal requirements for RCDs in some Australian states and territories will apply to workplaces where ‘plug in’ electrical equipment (electrical equipment supplied with electricity through a socket outlet - ie. vacuum cleaners, floor polishers, etc) is used in the following operating environments:
• Electrical equipment is exposed to operating conditions that are likely to result in damage to the equipment (or a reduction in its expected life span) including conditions that involve exposure to moisture, heat, vibration, mechanical damage, corrosive chemicals or dust
• Electrical equipment is moved between different locations in circumstances where damage to the equipment or to a flexible electricity supply cord is reasonably likely
• Electrical equipment is frequently moved during its normal use
Upright RCDs - suitable for use with low-lying powerpoints (ie. skirting boards)
These RCD’s have a rating of less than 30ms
RCD-4A
250 Volt AC/ 50Hz | 10 Amp
Trip Leakage Current: 30ma
Trip Time: <0.1 seconds
Operation Temp: -5°C to +40°C
Protection Class: IP65
• Can not lose the RCD as it becomes part of your appliance. This also means safety is never forgotten.
• Allows access to powerpoints which are low on skirting boards. (a problem that occurs with other RCD units).
• Works with a variety of different electrical appliances.
• Detects electrical leakage and will automatically cut off the power, ensuring security of life and property.
• Easy “How-to-use” Instructions printed on the RCD.
with permanent marker
Supplied with One Colour Type per packet of 100 tags.
• Suitable for most environments.
• 43mm x 100mm | UV Stable | Superior tear resistance
• Laminated with a seal down Security Flap to protect printed information
• Each Test Tag has a unique number to aid with record keeping
• Supplied with Permanent Marker Pen
• Space for: Tested By, Plant/Item No, Licence/Cert. No,Test Date, Next Test Due
100 PACK
Part No: TEST-BLK BLACK
ALSO ASK ABOUT OUR PERSONALISED TEST TAGS WITH YOUR COMPANY DETAILS
Part No: TEST-WHT WHITE
Part No: TEST-BLU BLUE Part No: TEST-RED RED
Now you can have your leads Tested and Tagged before being supplied. All testing is fully compliant to AS 3760:2010. Just ask us when placing your next order.
Part No:
TEST-TAG
Part No: ON/OFF SWITCH
SWITCHRI
VACUUM ON/OFF SWITCH FOR GHIBLI T1 BACKPACK, ASL7P, M9P, AS9P, AS12P-CBN
ROCKER ILLUMINATED S6 4 POLE ON/OFF SWITCH ROCKER ILLUMINATED 6 POLE
Part No:
T1-14
PUMP ON/OFF SWITCH FOR GHIBLI M9P
Part No:
GH2506269
ON/OFF SWITCH FOR CLEANSTAR/GHIBLI AS5
Part No:
GH2506232
ON/OFF SWITCH FOR CLEANSTAR BUTLER (VBUT)
Part No:
VBUT-25
Part No:
Part No: ON/OFF SWITCH FOR CLEANSTAR EX-FACTOR (VC80LX)
VC80LX-12
POWER SWITCH FOR XPOWER F16B FOGGER
Part No:
F16B-SWITCH
A14
ON/OFF SWITCH FOR PACVAC SUPERPRO / HAKO ROCKET VAC / VC10LP HOUSEMAID / VEPIC
Part No:
VC10LP-7
Part No: SWITCH FOR CLEANSTAR COMMERCIAL WET & DRY MACHINES (4-POLE)
VC15L-11
Part No: ON/OFF SWITCH FOR CLEANSTAR COMBIVAC C17-36
C17-36-93
Part No: ON/OFF SWITCH FOR CLEANSTAR BUTLER PRO (VBUT-PRO)
VBUT-PRO-17
Part No: ON/OFF SWITCH FOR CLEANSTAR CUTLASS EXTRACTION MACHINE (VCUTLASS)
VCUTLASS-17
RESET SWITCH FOR DYSON DC25
Part No:
DYS024
NOTE: Not all switches we have in stock are listed on this page. Please refer to the relevant spare parts page to find the switch that suits each individual machine.
DOMEL SINGLE STAGE FLO THRU MOTOR - 1450 WATT MAX
MOTOR TO SUIT: GHIBLI T1 BACKPACK (approx. 800 hours run time)
Height: 110mm
Part No: T1-20
463.3.205-6
Base height: 40mm Diameter: 110mm
DOMEL SINGLE STAGE FLO THRU MOTOR - 1350 WATT
MOTOR TO SUIT: PULLMAN ADVANCE COMMANDER PV900 BACKPACK, WERTHEIM W9000, SAUBER INTELLIGENCE SI-200, EXCELLENCE SE-400, CLASSIC SC-100
Part No: M0134
463.3.409-5
ITALIAN AMETEK 1200 WATT SINGLE STAGE FLO THRU LONG-LIFE MOTOR
SUITS: CLEANSTAR BUTLER (VBUT models), BUTLER PRO (VBUT-PRO), GHIBLI AS5 (old version); PULLMAN / GHIBLI AS5 (NEW MODELS); ELECTROLUX Z950 & Z951
Part No: VBUT-31 063200010
Height: 121mm
Base height: 44mm (including bottom lip)
Diameter: 131mm
ITALIAN AMETEK SINGLE STAGE BYPASS 1300 WATT
Suits Ghibli ASL7P, AS12P-CBN, M9P
Height: 135mm
Part No: GH2505327 E 064200005
Base height: 45mm Diameter: 130mm
ITALIAN AMETEK SINGLE STAGE BYPASS HIGH SPEED 1400 WATT
Suits: some Nilfisk Wet ‘n’ Dry machines; Nilfisk GWD300 Series, Nilfisk Advance GWD350, GWD375; Nilfisk-Alto Maxxi WD / Maxxi WD 7; Ghibli AS9 / AS9P / SP8; Hako Super Vac L 1-30; ALTO-Wap Maxxi WD; Colombus RS 27 / ST 22
Part No:
GH2505329
Previously # M066
Ametek #: 6110820033 (New) 064200027 (Old)
Height: 132mm
Base height: 45mm Diameter: 130mm
SINGLE STAGE
1600W SINGLE STAGE FLO THRU MOTOR TO SUIT DYSON BARREL MACHINES (including DC05, DC08, DC11, DC19, DC20, DC21, DC29 - not DC23)
Part No: M048
INTERNAL THERMAL CUT-OUT (TCO)
Height: 110mm
Base height: 50mm Diameter: 135mm (it is strongly recommended that you fit a new pre-motor filter when fitting a new motor)
SINGLE STAGE 1400 WATT MOTOR
SUITS: CLEANSTAR AEROLITE VBP1400 BACKPACKS; PULLMAN AS4; NILFISK GD910, SALTIX 3, VP300
Part No: VBP1400-12
Height: 110mm
Base height: 35mm Diameter: 130mm
1000W MAX. SINGLE STAGE FLO-THRU MOTOR
Part No: M034
SUITS: CLEANSTAR STARLITE BACKPACK (VBK), CLEANTECH PIGGYVAC BACKPACK (VPIG), KERRICK AND SOME POLIVAC BACKPACKS
AMETEK 1200 WATT SINGLE STAGE FLO THRU MOTOR KIT
Height: 115mm
Base height: 35mm Diameter: 135mm
SUITS: CLEANSTAR AS5-EVO (new version), PULLMAN AS5
Part No: M067 N6210820090
SINGLE STAGE FLO THRU MOTOR - 1200W TO SUIT: CLEANSTAR AS4 HOUSEMAID VC10LP / VC10LPH; PULLMAN AS4
Part No: VC10LP-31
SINGLE STAGE 700 WATT MOTOR
Height: 125mm
Base height: 40mm Diameter: 130mm
Suits Cleanstar/SPRINTUS FLOORY, ERA EVO, ERA PRO
Part No: VERA-114109
ITALIAN AMETEK 800/1000 WATT SINGLE STAGE FLO THRU SUCTION MOTOR
SUITS: CLEANSTAR C17-36 UPRIGHT COMBIVAC; TENNANT V5
Part No: C17-36-83
E 063200389
Height: 112mm
Base height: 43.5mm Diameter: 105mm
SINGLE STAGE FLO THRU MOTOR - 1400W TO SUIT: PANASONIC MC-CG522 / MC-CG524
Part No: VPAN-522/524-B10
SINGLE STAGE FLO THRU MOTOR - 1400W TO SUIT: PANASONIC MC-CG710 / MC-CG712
Part No: VPAN-710/712-B15
ORIGINAL DC MOTOR TO SUIT AEROLITE FLASH BATTERY BACKPACK
Part No: VBP-BATT30-12
Height: 115mm
Base height: 36mm Diameter: 105mm
NEW BRUSHLESS DC MOTOR KIT TO SUIT AEROLITE FLASH BATTERY BACKPACK
Part No: VBP-BATT30-MTR
SINGLE STAGE FLO THRU MOTOR - 1200W TO SUIT: CLEANSTAR VBP5000 BACKPACK, PULLMAN PV500 BACKPACK, JANITOR JV500 BACKPACK
Part No: VBP5000-17
SINGLE STAGE FLO THRU MOTOR - 1800W TO SUIT: CLEANSTAR ALLERGY BAGLESS VACUUM (VALLERGY)
Part No: VALLERGY-32
SINGLE STAGE FLO THRU MOTOR - 1800W TO SUIT: CLEANSTAR ALLERGY PRO BAGLESS VACUUM (VALLERGYPRO)
Part No: VALLERGYPRO-41
TWO STAGE - FLO THRU
SHANGHAI AMETEK 1000W TWO STAGE FLO THRU
TO SUIT: CLEANSTAR VC15LP COMMERCIAL PLASTIC DRY MACHINE; VL300 - TWIN MOTOR; HAKO ROCKET VAC (OLD STYLE), VALET V85 DUCTED SYSTEM
Part No: M030
119655
Height: 159mm
Base height: 73mm Diameter: 145mm
1000 WATT TWO STAGE FLO THRU MOTOR
SUITS: PACVAC SUPERPRO 700 BACKPACK (only older models that use a 2-stage motor)
Height: 160mm
Part No: M019C
This motor uses MCB027 carbon brushes
Base height: 65mm
Fan Base Diameter: 145mm
AMETEK 1500W TWO STAGE FLO THRU (CONICAL FAN BASE) TO SUIT: OVO 18L DUCTED VACUUM (V550ST), NADAIR 22L DUCTED VACUUM (V600AL), NADAIR 32L DUCTED VACUUM (V700AL)
Part No: V550/600-20 122430
Height: 167mm
Base height: 81mm Diameter: 145mm
1000 WATT TWO STAGE BYPASS MOTOR
SUITS: PACVAC SUPERPRO DUO 700 BACKPACK, CLEANSTAR BSE3IN1 CARPET EXTRACTION MACHINE, SOME VAX WET ‘N’ DRY MODELS, SOME SOTECO VACUUMS, PULLMAN AS400, AS10, ASL10
Part No: M018C
This motor uses MCB027 carbon brushes
Height: 177mm
Base height: 68mm Fan Base Diameter: 145mm
SHANGHAI AMETEK 1100W - 2 STAGE BYPASS MOTOR
SUITS: CLEANSTAR WET ‘N’ DRY COMMERCIAL RANGE (VC15L, VC30L, VC60L, VC90LP); CLEANSTAR SD30 DUCTED SYSTEM, VC80LX EX-FACTOR; ASTROVAC CP120L, DP1200B; PREMIER CLEAN NV150, MONARCH 250 & 650, COMPACT, PREMIER 200; PULLMAN CB15, CB30, CB60, CB90, PV9, PV14; ELECTRON (EVS): EL1500; VALET VL150 & VL300; HAKO SHADOWVAC; TASKI VACUMAT 22, 35, 40
Part No: M031 119656
Height: 172mm
Base height: 69mm Diameter: 145mm
SHANGHAI AMETEK 1400W - 2 STAGE BYPASS MOTOR
SUITS: PULLMAN PV9, PV11, PV14; CONTRACTOR CV3; NILFISK BV1100 BACKPACK; ORIGIN BV200 BACKPACK; FESTO CT33; WAP & STIHL; SANTOEMMA SABRINA,SABRINA-MAXI; STIHL SE100
CLEANSTAR CUTLASS, SABRE JUNIOR EXTRACTION MACHINES
Part No: M097
Height: 173mm
Base height: 72mm Diameter: 145mm
122326-00
Height: 178mm
Base height: 72mm Diameter: 145mm
Height: 173mm
Base height: 69mm Diameter: 145mm
MEASUREMENTS ONLY
SHANGHAI AMETEK 240V 2 STAGE TANGENTIAL - 1100 watt (3.5amp)
Part No: M032
PLT QTY = 60
Height: 170mm
Base height: 71mm
Diameter: 145mm 119625
TO SUIT VARIOUS DUCTED VACUUM SYSTEMS & CARPET EXTRACTION MACHINES: Valet: V1S, V1P, V3P, V115, VB150 |
AussieVac: AV1100, AV2400 | Electron (EVS): EDP2404 | Premier Clean: Monarch 490, Premier 490 / Bagless 490 | Lux: CD101DSC | DasVac DV1
1100 WATT 2 STAGE TANGENTIAL MOTOR
Height: 170mm
Part No: M032C
TO SUIT:
Base height: 58mm
Fan Base Diameter: 145mm
Various Carpet Extraction Machines & Ducted Vacuum Systems
This motor uses MCB027 carbon brushes
AMETEK 2 STAGE TANGENTIAL MOTOR
1650 WATT (Conical Base)
Part No: M084 119678-00
TO SUIT DUCTED SYSTEMS:
AussieVac: AV1500 | AstroVac: DL1700B | Beam 2775 | Electron: EVS 2707 | Storm: Typhoon 1700
Height: 189mm
Base height: 59mm Diameter: 145mm
AMETEK 3 STAGE BYPASS PERIPHERAL 1500 WATT MOTOR
Part No: VSABRE-37-NEW
Height: 195mm
Base height: 90mm Diameter: 145mm
NEW 2023 UPGRADED VERSION MOTOR to suit: SABRE Carpet Extraction Machine (VSABRE), Serena Silent
NOTE: If you are replacing the motor in an older model Sabre machine, you will need to purchase the following parts to convert it with the newer style motor: VSABRE-37-NEW, VSABRE-36-NEW, VSABRE-39-NEW, VSABRE-1322.
1200W 3 STAGE TANGENTIAL
(SUITS: CARPET EXTRACTION MACHINES)
Part No: M059
116859-13
Height: 199mm
Base height: 92mm Diameter: 145mm 4.5-5amp
ALSO SUITS: VOLTA E400, E400A DUCTED VACUUM SYSTEMS; POLIVAC PREDATOR MKII, MKIII
DC MOTORS - LOW VOLTAGE APPROXIMATE MEASUREMENTS ONLY
IMPORTANT NOTE: THESE MOTORS ARE ALL LOW VOLTAGE
24V 2 STAGE TANGENTIAL BYPASS (400 WATT)
Part No: M026
116157
Height: 168mm
Base height: 69mm Diameter: 145mm
24V 3 STAGE TANGENTIAL BYPASS MAX 630 WATT
Part No: M021
36V 3 STAGE TANGENTIAL BYPASS
Part No: M016
116515-13
Height: 198mm
Base height: 92mm
Diameter: 145mm
116513-13
Height: 200mm
Base height: 91mm Diameter: 145mm
ORIGINAL DC MOTOR TO SUIT AEROLITE FLASH BATTERY BACKPACK
Part No: VBP-BATT30-12
Height: 115mm
Base height: 36mm Diameter: 105mm
NEW BRUSHLESS DC MOTOR KIT TO SUIT AEROLITE FLASH BATTERY BACKPACK
Part No: VBP-BATT30-MTR
SOLD INDIVIDUALLY
CARBON BRUSH & HOLDER
SUITS LAMB AMETEK 145mm MOTORS (SHANGHAI & USA) including M030, M031, M032, M059, M097
Part No:
MCB001
CARBON BRUSH & HOLDER SUITS LAMB 183mm MOTORS
Part No:
MCB002
CARBON BRUSH & HOLDER
SUITS ITALIAN LAMB AMETEK FLO-THRU & BYPASS MOTORS
Part No:
MCB006
CARBON BRUSH & HOLDER
SUITS DOMEL FLO-THRU
Part No:
MCB007
CARBON BRUSH INSERT & SLEEVE
SUITS DOMEL BYPASS
Part No:
MCB008
CARBON BRUSH - SUITS 36V 3 STAGE TANGENTIAL (M016)
Part No:
MCB013
CARBON BRUSH - SUITS 36V 2 STAGE TANGENTIAL (M012)
Part No:
MCB014
CARBON BRUSH - SUITS 24V 2 STAGE & 3 STAGE TANGENTIAL (M021 & M026)
Part No:
MCB015
SOLD INDIVIDUALLY
SPLIT CARBON BRUSH SUITS M007 & M008 MOTORS
Part No: MCB016
CARBON BRUSH TO SUIT AMETEK ITALIA MOTORS (M001, M011)
Part No: MCB022
CARBON BRUSH TO SUIT M084 MOTOR
Part No: MCB025
CARBON BRUSH TO SUIT M018C, M019C and M032C MOTORS
Part No: MCB027
MOTOR LEAD
Part No: M0LEAD
Sold individually
MOTOR FAN ADAPTOR WITH FLANGE Suits 145mm Diameter Motors
Part No: M-ADAP
MOTOR GASKET SUITS 130mm MOTORS
MOTOR RUBBER GASKET - UNIVERSAL SUITS 145mm MOTORS MG000
MG000-THICK Part No:
Inner Thickness: 5mm
Inner Thickness: 11mm
Height: 38mm
Internal Diameter: 130mm
External Diameter: 145mm Part No: VC10LP-30
Part No:
T1-19
Models suited:
Ghibli T1 Backpack (all models) - Fan Base Gasket
T1-21 Ghibli T1 Backpack (all models) - Top of Motor
VBUT-22 Cleanstar Butler (VBUT models)
VBUT-PRO-8 Cleanstar Butler Pro (VBUT-PRO)
VBP1400-11 Cleanstar Aerolite Backpack (VBP1400 models)
MG000 Cleanstar Commercial Wet & Dry Vacuums (VC15L, VC30L)
VC90LP-15 Cleanstar Commercial Wet & Dry Vacuums (VC60L, VC90LP, VC90LP-3M)
VC10LP-30 Cleanstar Housemaid (VC10LP, VC10LPH)
VCUTLASS-5 Cleanstar Cutlass 30L Extraction Machine (VCUTLASS) - Upper Gasket
VCUTLASS-5A Cleanstar Cutlass 30L Extraction Machine (VCUTLASS) - Lower Gasket
V-N80-101091 Sprintus N80/2K 80L Wet & Dry Vacuum (V-N80)
NADAIR-GASKET Nadair Odo V550ST Ducted Vacuum Cleaner
VSABRE-1322 New motor adaptor for older model Cleanstar Sabre Extraction Machine
PARTS TO SUIT CLEANSTAR AEROLITE VBP1400 BACKPACKS
AEROLITE VBP1400 BACKPACK
CLEAR LID TO SUIT: AEROLITE VBP1400
Part No:
VBP1400-1C
LID CLIP TO SUIT: AEROLITE VBP1400
Part No: VBP1400-CLIP
SHOULDER STRAPS (PAIR) TO SUIT: AEROLITE VBP1400 & STARLITE (VBK)
Part No:
VBP1400-33-SHLD
CLOTH FILTER BAG TO SUIT: AEROLITE VBP1400 BACKPACK
Part No:
VBP1400-7
EXHAUST FILTER TO SUIT: AEROLITE VBP1400 BACKPACK
BACK PAD & WAIST STRAP TO SUIT: AEROLITE VBP1400 & STARLITE (VBK)
Part No:
VBP1400-33-WAIST
HEPA FILTER TO SUIT: AEROLITE VBP1400 BACKPACK
Part No:
VBP1400-8
SYNTHETIC DUST BAGS (5-PK) TO SUIT: AEROLITE VBP1400 BACKPACK
Part No: AF500S
VBP1400-19
Part No:
LID CLIP FOR T1 BACKPACK (sold individually)
Part No: T1-10
LID FOR T1 BACKPACK (Version 1) - For older models that use only 1 lid latch clip
Part No: T1-1
GREY LID FOR T1 BACKPACK (Version 2 & 3) - For newer models that use 2 lid latch clips
Part No: T1v2-1
(Current Model)
CLEAR LID FOR T1 BACKPACK
(Version 2 & 3) - For newer models that use 2 lid latch clips SHOULDER STRAPS FOR T1 BACKPACK (suits all models)
Part No: T1v3-12
VELCRO WAIST STRAP FOR T1 BACKPACK (suits all models)
Part No: T1v3-13
Part No: T1v3-1C
(Current Model)
EXHAUST FILTER TO SUIT: T1 BACKPACK HEPA FILTER TO SUIT: T1 BACKPACK PRE-MOTOR FILTER TO SUIT: T1 BACKPACK
CLOTH FILTER BAG TO SUIT: T1 BACKPACK T1-25 Part No:
Part No:
HYPERCONE CLOTH BAG
STYLE CORD RESTRAINT (with Carabiner)
No: RUBBER CORD RESTRAINT
BACKPAD / WAIST STRAP ASSEMBLY
TO SUIT: ROCKET VAC XP
PAPER DUST BAGS (5-pk)
Part No:
AF1073
FOAM EXHAUST FILTER TO SUIT: SHADOW VAC, ROCKET VAC
Part No:
RV-EXHAUST
SYNTHETIC DUST BAGS (5-pk)
Part No:
AF1073S
END CAP TO SUIT: ROCKET VAC
Part No:
RV-ENDCAP
LID CLIP TO SUIT: ROCKET VAC
PARTS TO SUIT: VAX COMMERCIAL ADVANCE BACKPACK VXCB-01
PV-CLIP
Part No: (KC131)
and Waist Strap
LIDS, CLIPS, BACK PADS, SHOULDER STRAPS & WAIST PADS
SHOULDER STRAPS (PAIR) TO SUIT: VARIOUS NILFISK, ORIGIN & PULLMAN BACKPACKS
SHARN Part No: (20120)
OPEN-ENDED SYNTHETIC DUST BAGS (10-pk)
AF607S Part No:
ROUND INLET FILTER DISC (10-pk)
Part No:
FILTI1-10
UNIVERSAL ‘LOOP-THROUGH’ SHOULDER STRAPS FOR BACKPACKS (PAIR) EASILY LOOPS THROUGH TOP OF BACK PAD (OR CARRY HANDLE FRAME)
Part No:
SH-STRAP
BACKPACK, PULLMAN ADVANCE LITHIUM PL950 BATTERY BACKPACK - 32mm version
Part No:
HBCOM-COMM32
UNIVERSAL WAIST PAD FOR BACKPACKS
PULLMAN ADVANCE COMMANDER PV900 BACKPACK - 35mm version
Part No: HBCOM-COMM35
LID TO SUIT: PULLMAN ADVANCE COMMANDER PV900 BACKPACK PV900-LID Part No:
Part No:
SH-WAIST
PULLMAN JANITOR JV500 BACKPACK, PULLMAN PV500 BACKPACK
Part No: VBP5000-HBCOM
HARNESS ASSEMBLY TO SUIT: PULLMAN ADVANCE COMMANDER PV900 BACKPACK PV900-HARN
Part No:
• Microfibre properties trap and remove particles, bacteria, dirt, dust and grime
• Lint free & non-abrasive
• Hypoallergenic product that allows you to clean without the use of chemicals
• Ideal for wet or dry use on multiple surfaces
• Dimensions: 40cm x 40cm | Made from 20% Polyamide, 80% Polyester | 320GSM
320 gsm 40x 40cm TOP QUALITY
• Comes in various colour options to help you identify different coloured towels for different wiping applications and surfaces.
• Helps prevent cross contamination between wiping applications and results in safer, cleaner and healthier environments
• Ergonomic design
• Removable dirt brush
• Safe for use on all hard floor surfaces
• Removeable water tank
• Spray trigger handle
• Can be used to spray water, cleaning liquid or disinfectant
• Easy cleaning with no residue or marks
• Swivel mop head for hard to reach areas
• Washable microfibre cleaning pad
• Ultra lightweight
• Stainless steel rod
• Quick set up & easy to disassemble for storage
Part No: FMOP-7AB
• Double-Sided Chenille & Coral Velvet
• For use with FMOP-7AB
Part No: FMOP-PADCV
Flexible Left Bend
• Flexible microfibre bristle pad
• Long 175cm reach
• Extendable handle (70cm - 120cm)
• Bendable, flexible & durable
• Fine decontamination ability
• Super high water & dust absorbency
• Perfect for dry cleaning & dusting
• Washable microfibre pad
• 24 Units Per Carton
• Great for cobwebs and general cleaning
• Ideal for dusting in those hard-to-reach places
• Dome head shape
• Telescopic pole extends from 850mm - 1480mm
• Extension with Dome Head: 980mm - 1620mm
•
•
•
• For use on carpets & artificial turf
• Will not harm your carpet or lawn
• Telescopic long reach handle
• Easy to use and store
Suitable for both:
Part No: 10-2100
• Strong and durable
• Light weight
• Ideal for removing fur hair, dust and lint from clothing, furniture and car seats
• 60 Sheets per roll
• Sticky perforated sheets
Part No: LINT
ARTIFICIAL LAWN
• 2 Rolls per pack
• 60 Sheets per roll
• 120 Sheets per pack
Part No: LINT-2PC
LADYBUG HANDHELD SWEEPER
• Dual roller brush action
• Great for picking up hair, lint and crumbs
• Can be used on carpets, rugs, upholstery, beds, cars and more
• Easy to empty and clean rollers
• Compact design and no power required
Part No: LADYBUG
GENERIC REPLACEMENT STEAM MOP PADS
Suitable for:
• STEAMSTAR SS-101 (by Cleanstar)
Part No: STEAM-PAD
STEAM PADS FOR STEAMSTAR HANDHELD STEAM CLEANER (SC-136)
Part Number:
# FILTD-1
Description:
Washable Pre-Motor Filter
Suits Models: DC05, DC08, DC14, DC19, DC20, DC21, DC29
Part Number:
# FILTD-5
Description: HEPA Filter
Suits Models: DC02
Part Number:
# FILTD-PV6
Description: Pre-Motor Filter
Suits Models:
DYSON V6 (ALL MODELS), DYSON V7 (ALL MODELS), DYSON V8 ABSOLUTE, V8 ABSOLUTE+, V8 ANIMAL, V8 ORIGIN, DC58, DC58 ANIMAL, DC59, DC59 ANIMAL, DC61, DC62, DYSON SV03
Part Number:
# FILTD-V10
Description: HEPA Filter
Suits Models:
DYSON V10 (ALL MODELS), V10 CYCLONE SERIES, V10 ABSOLUTE, V10 ABSOLUTE+, V10 ANIMAL, V10 ANIMAL+, V10 MOTORHEAD, V10 TOTAL CLEAN, DYSON SV12
Part Number:
# FILTD-3
Description: Pre-Motor Filter
Suits Models: DC07 (washable)
Part Number:
# FILTD-DC45
Description: Pre-Motor Filter
Suits Models: DC30, DC31, DC34, DC35, DC44, DC45, DC56, DC57
Part Number:
# FILTD-V7
Description: Post-Motor Filter
Suits Models:
DYSON V7, DYSON V8, V8 ANIMAL, V8 ULTIMATE, V8 ABSOLUTE
Part Number:
# FILTD-V11
Description: Filter
Suits Models: DYSON V11
Part Number:
# FILTD-30
Description:
Pre-Motor Filter
Suits Models: DC49
Part Number:
# FILTD-34
Description:
Post Motor HEPA Filter
Suits Models: DC04, DC05, DC08, DC19, DC20, DC21, DC29
Part Number:
# FILTD-35
Description:
Post Motor HEPA Filter
Suits Models: DC07, DC14
Part Number:
# FILTD-37
Description:
Post Motor Filter
Suits Models: DC25
Part Number:
# FILTD-36
Description:
Washable Pre-Motor Filter
Suits Models: DC05, DC08, DC14, DC19, DC20, DC21, DC29
Part Number:
# FILTD-45
Description: Washable Pre-Motor Filter
Suits Models: DC28, DC28C, DC37, DC39, DC39i, DC53
Part Number:
# FILTD-39
Description:
Post Motor Filter
Suits Models: DC24
Part Number:
# FILTD-46
Description:
Post Motor HEPA Filter
Suits Models: DC41, DC41i, DC41 Mk2, DC43, DC55, DC65, DC66
Part Number:
# DYS002
Description:
Clutched Brush Bar Assembly with Two Interchangeable Sets of End Caps
Suits Models:
DC04, 07, DC14, DC33
* Sold individually
Part Number: # DYS004
Description: Brushroll End Cap
Suits Models: DC07, DC25
Part Number: # DYS003
Description: Brush Bar Assembly
Suits Models: DC25
Part Number: # DYS005
Description:
Brush Bar Assembly
Suits Models: DC24
Part Number: # DYS007
Description: Non Clutch Models Soleplate
* Sold individually
Suits Models: DC04, DC07, DC14
Part Number: # DYS011
Description: Post Motor HEPA Filter Sealing Gasket
Suits Models: DC07, DC14
Part Number: # DYS010
Description: Wand Assembly
Suits Models: DC58, DC59, DC61, DC62, V6, SV03
Part Number: # DYS012
Description: Cyclone Foam Dust Gasket Seal
Suits Models: DC18, DC25
Part Number: # DYS014
Description: Stretch Hose Assembly
Suits Models: DC07
Part Number: # DYS016
Description: Stretch Hose Assembly
Suits Models: DC14
Part Number: # DYS015
Description: Extension Hose
Suits Models:
Suits a wide range of Dyson models
Part Number: # DYS019
Description:
Suits Models: DC27, DC28 Stretch Hose Assembly
Part Number: # DYS025
Description: Extendable Flexible Crevice Tool with Detachable Dusting Brush (32mm, 295mm-465mm)
Suits Models:
Suits a wide range of Dyson models
Part Number: # DYS017
Description: U-Bend & Stretch Hose Assembly
Suits Models: DC15
Part Number: # DYS024
Description: Vacuum Reset Switch Assembly
Suits Models: DC25
Part Number: # DYS026
Description: ‘Combo’ Crevice Tool & Dusting Brush
Suits Models: DC22, DC25, DC25i, DC27, DC33, DC33i
Part Number: # DYS027
Description:
Tool Adaptor
Suits Models: DC01, DC02, DC03, DC04, DC05, DC07, DC08, DC14, DC18, DC19
Part Number: # DYS029
Description: Crevice Tool Attachment
Suits Models: DC23, DC23T2, DC32
Part Number: # DYS031
Description: Stubborn Dirt Brush Tool
Suits Models: DC16, DC30, DC31, DC34, DC35, DC56
Part Number: # DYS028
Description: ‘2-in-1’ Combination Tool
Suits Models: DC16, DC24, DC30, DC31, DC34, DC35, DC44
Part Number: # DYS030
Description: Mattress Tool
Suits Models: Suits a wide range of Dyson models
Part Number: # DYS032
Description: Quick-Release
Conversion Adaptor Tool to Standard 32mm Fitting
Suits Models: V7, V8, V10, V11
Part Number: # DYS033
Description:
Stair Tool (32mm)
Suits Models: Suits a wide range of Dyson models
Part Number: # DYS034
Description: Stair Tool (32mm)
Suits Models: Suits a wide range of Dyson models
Part Number: # DYS036
Description:
Conversion Adaptor Tool from Specialist Dyson Fitting to Standard 32mm Fitting
Suits Models:
Suits a wide range of Dyson models
Part Number: # DYS038
Description:
Slim type Motorhead Brush Bar (185mm)
Suits Models: V6, DC62, SV03 Cordless Stickvacs
Part Number: # DYS044
Description: Adaptor Fitting
Suits Models: From V8 to V6 Fitting
Part Number: # DYS048
Description: Extension Hose
Suits Models: V7, V8, V10, V11 Cordless Stickvacs
Part Number: # DYS037
Description: Motorhead Brush Bar (225mm)
Suits Models: V6, DC58, DC59, DC61, DC62, SV03 Cordless Stickvacs
Part Number: # DYS043
Description: Complete Accessory Tool Kit
Suits Models: V7, V8, V10, V11 Cordless Stickvacs
Part Number: # DYS046
Description: Handheld Mini Turbo Brush
Suits Models: V7, V8, V10, V11 Cordless Stickvacs
Part Number: # DYS049
Description: Pet Brush
Suits Models: V7, V8, V10, V11 Cordless Stickvacs
Part Number: # DYS050
Description: Pet Comb/Brush
Suits Models:
V6, DC45, DC58, DC59, DC61, DC62
Part Number: # DYS052
Description:
Extension WandRed
Suits Models: V7, V8, V10, V11 Cordless Stickvacs
Part Number: # DYS051
Description:
Extension WandBlue
Suits Models: V7, V8, V10, V11 Cordless Stickvacs
Part Number: # BATT-V11
Description:
Replacement Battery
25.2V, 2.0AH Lithium
Suits Models:
Various V11 Cordless Stickvacs, (SV14 models) V11 Absolute, V11 Absolute Pro, V11 Absolute Pro+, V11 Motorhead, V11 Torque Drive
Part Number: # M048
Description: 1600W Single Stage Flo Thru Motor
Suits Models: Dyson Barrel Machines DC05, DC08, DC11, DC19, DC20, DC21, DC29
Part Number: # FILTD-FAN1
Description: Dyson Fan Filter
Suits Models: TP00, TP02, TP03, AM11
Part Number: # FILTD-FAN3
Description:
Part Number: # FILTD-FAN2
Description:
Dyson Fan Filter Dyson Fan Filter Set
Suits Models: TP04, DP04, HP04
Suits Models: HP00, HP01, HP02, HP03, DP01, DP03
Part Number: # DYS047
Description: Dyson Fan Filter
Suits Models:
TP06, HP06, PH02, HP09 Air Purifiers
A highly versatile ducted vacuum system recommended for medium-size homes with 40-60 metres of pipe. An octagonally shaped, twin-motor machine with a disposable bag dust collector, the SD30 is strong and built to last.
FEATURES:
• Air Watts: 710
• 2250 watt power (twin motor)
• Motor speed: 24400 RPM
• 3 Horsepower (3HP)
• Sealed Vacuum (Water Lift): 2484mm
• Air Flow: 97 L/sec
• Bag machine (uses Starbag: AF552)
• Dimensions: 760mm x 360mm
• Max. pipe run: 60 metres
• In-built overload protection
• Entry points either side
We also have a range of Ducted Hose, Wand & Tool Accessory Kits available - in 9m, 10m, 11m & 12m. DUCTED TOOL KITS AVAILABLE
Comes with SILVER DUCTED SWITCH HOSE
(allows you to turn on/off ducted vacuum from hose handle)
WESSEL-WERK COMBO FLOOR TOOL
CREVICE TOOL
TELESCOPIC ROD
WINGED DUSTING BRUSH
Comes with SILVER VACUUM HOSE
PREMIUM CHROME CURVED WAND DUCTED BANDED HOSE CUFF
WESSEL-WERK COMBO FLOOR TOOL
CREVICE TOOL
TELESCOPIC ROD
WINGED DUSTING BRUSH
DUCTED COMPLETE HOSE (SILVER) - 32MM COMES WITH CHROME WAND AND DUCTED BANDED HOSE CUFF
No:
Part No:
Part No: Part No:
METRE
METRE
METRE
DUCTED COMPLETE HOSE (BEIGE) - 32MM
Part No:
Part No:
HBGCOM9 9 METRE
COMES WITH CHROME WAND AND DUCTED BANDED HOSE CUFF 12 METRE
HBGCOM12
DUCTED SWITCH HOSE - 32MM
Comes with Integrated On/Off Button on Hose Handle
Part No: HS32-12S 12M
Part No: HS11 11 metres
Part No: HS11T NO TUBE WITH TUBE 11 metres
DUCTED BANDED HOSE CUFF - 32mm
SWEEP BEND 90 DEG VACULINE
PVC1 Part No:
SHORT ELBOW 90 DEG
PVC6 Part No:
SWEEP TEE 90 DEG
PVC3 Part No:
FLANGED ELBOW 90 DEG
PVC9 Part No:
ELBOW 45 DEG PIPE ADAPTOR
PVC11 Part No:
SLIP COUPLING
PVC19 Part No:
PVC16 Part No:
VALVE EXTENSION
PVC27 Part No:
PIPE SADDLE - VACULINE
PVC22 Part No:
PIPE COLLAR
PVC32 Part No:
PLASTER GUARD
PVC29 Part No:
HANGB Part No:
VACUVALVE - WHITE
INL7 Part No:
VACPAN - WHITE
VP20 Part No:
V5000-38 Inlet Filter
SPARE PARTS & ACCESSORIES ZELMER POWERHEAD Part No: PHZEL
V5000.OHQ Part No:
UBZ Upholstery Brush
FTH-ZEL Hard Floor Brush
V450-42 Telescopic Rod
V5000-33 PCB Circuit Board
V5000-A Cord Rewinder
Crevice Tool
AF4220S (plastic template)
FTT-ZEL Air Driven Turbo Brush
M055 Motor
V5000-40 Front Wheel Bracket
VZEL-FRT WHEEL Front Wheel
PHZEL-BELT Belt
PHZEL-CORD Cord (3.2m long)
PHZEL-070430 Switch Signal
PHZEL-2110120 Motor
AF430S Synthetic Bag
FT-ZEL Combination Floor Tool
V5000-12 Switch Button
Dusting Brush
VZEL-7 Cover Latch
VZEL-22 Cover Interlock
V450-19 Rear Wheel
V5000-14 Control Button (+)
V5000-2 Front Cover
VZEL-34 Triac Board
VZEL-49 Spring for Cover Latch
PHZEL-CLIP Clip
PHZEL-PULLEY Belt Pulley/Cog
PHZEL-2110050 Feed System
PHZEL-COVERBL Upper Guard (Black)
PHZEL-2110030 Roller Brush
PHZEL-COVERGR Upper Guard (Grey)
PHZEL-SOCKET Socket
PHZEL-2110017 Barrel Sleeve
PHZEL-2110006 Motor Dumper
PHZEL-PULLEY Belt Pulley-Cog
SPARE PARTS & ACCESSORIES
UBZ Upholstery Brush
V5000-38 Inlet Filter
AF4220S (plastic template)
AF430S Synthetic Bag
V450-19 Rear Wheel
V5000-14 Control Button (+)
VZEL-22 Cover Interlock
CTZ Crevice Tool
V5500-61 Cyclone Filter Insert
VZEL-49 Spring for Cover Latch
V450-42 Telescopic Rod
DBZ Dusting Brush
V5500-FILT1 HEPA Filter for Cyclone Insert
FTH-ZEL Hard Floor Brush
VZEL-7 Cover Latch
V5500-FILT2 Outer Mesh Cover for HEPA Outlet Filter
FT-ZEL Combination Floor Tool
FTT-ZEL Air Driven Turbo Brush
V5000-33 PCB Circuit Board
V5000-A Cord Rewinder
V5000-12 Switch Button
V5000-40 Front Wheel Bracket
VZEL-FRT WHEEL Front Wheel
VZEL-34 Triac Board
M055 Motor
with 3-Pin IEC Lead to suit GHIBLI T1 Backpack, newer Origin, Pullman & Nilfisk backpacks
with 2-Pin IEC Lead to suit PACVAC Backpacks (newer models),HAKO Rocket Vac XP, Pullman PC9
with Straight 2-Pin Lead to suit earlier model Origin MADE, Nilfisk, Pullman, Ghibli AS5, Hako Backpacks, some Wertheim models and Piggyvac
These Panasonic vacuum cleaners all use 35mm tools and attachments
Image Coming Soon
Image Coming Soon
HBCOM-VP522/524
Complete Hose 522/524 models
VPAN-522-B3 Exhaust Filter 522 model
VPAN-710/712-B21
Pre-Motor Filter 710/712 models
VPAN-522/524-A4
Nozzle Holder 522/524 models
VPAN-522/524-B10
Motor 522/524 models
VPAN-522/524-B20
Wheel Unit
522/524 models
VPAN-522/710-A6
Combo Floor Nozzle
522/710 models
VPAN-710/712-A4
Crevice Nozzle 710/712 models
VPAN-710/712-A9
Hand Nozzle 710/712 models
VPAN-710/712-B28
Wheel Unit
710/712 models
VPAN-522/524-A1
Metal Wand 522/524 models
VPAN-710/712-A1
Metal Wand 710/712 models
HBCOM-VP710/712
Complete Hose for 710/712 models
VPAN-522/524-B29
Foam Pre-Motor Filter 522/524 models
Image Coming Soon
Image Coming Soon
VPAN-710/712-B4 HEPA Filter 710/712 models
VPAN-522/524-B12
Lead Wire B Unit 522/524 models
VPAN-522/524-B21
Cord Reel Unit 522/524 models
VPAN-524-A6
Combo Floor Nozzle 524 model
VPAN-710/712-A10
Dusting Brush 710/712 models
VPAN-710/712-A7
Upholstery Tool 710/712 models
VPAN-710/712-B15
Motor 710/712 models
VPAN-710/712-B32
Switch Pedal 710/712 models
VPAN-B17
Supporter All models
VPAN-524-B3 HEPA Filter 524 model
Image Coming Soon
Image Coming Soon
Image Coming Soon
Image Coming Soon
Image Coming Soon
VPAN-522-B6 Dust Cover 522 model
VPAN-522/524-A8
Dusting Brush 522/524 models
VPAN-522/524-B16 Castor Unit 522/524 models
VPAN-522/524-B23
Switch Pedal 522/524 models
VPAN-710/712-A2SP
Button Spring suits part A2 - 710/712 models
VPAN-710/712-A8 Hard Floor Nozzle 710/712 models
VPAN-710/712-B17
PCB A Unit 710/712 models
VPAN-712-B6
Dust Cover Unit 712 model
VPAN-710/712-B33
Cord Rewind Button 710/712 models
VPAN-712-A6
Floor Nozzle 712 model
VEPIC-HOSE Complete Hose
VEPIC-ME Hose Machine End Connection Image Coming Soon
AF1055S Synthetic Dust Bag
VEPIC-46 HEPA Filter
VEPIC-40 Small Wheel Image Coming Soon
VEPIC-5 Green/Red Switch Image Coming Soon
LITTLE BRO
Model: VBRO20
• 1400 Watt
• 20 Litre capacity
BIG BRO
Model: VBRO80
• 2000 Watt (twin motor)
• 80 Litre capacity
BIGGEST BRO
Model: VBRO100
• 2000 Watt (twin motor)
• 100 Litre capacity
SPARE PARTS (20L)
# VBRO20L-23 Wheel
# VBRO20L-39 Motor
# VBRO20L-51 Hose Assembly
SPARE PARTS (60/80/100L)
# VBRO-56 Ring
SPARE PARTS
PS-002-1004A Motor
PS-002-S60 #60 Sanding Paper Also suits PS-001
PS-002-S40 #40 Sanding Paper Also suits PS-001
PS-08 15-inch Microfibre Pad
PS-002-S120 #120 Sanding Paper Also suits PS-001
PS-002-S80 #80 Sanding Paper Also suits PS-001
Part No:
PS-002
PS-04 13-inch Polisher Pad (White)
PS-1005 Wheel PS-1019 Handle
PS-1037 Staring Capacitor
PS-1020 Power Switch
SPARE PARTS, ACCESSORIES & ATTACHMENTS
SS-101-GLIDE Carpet Glider
Model:
SS-101-O
SS-101-HAND Detachable Hand Held Steamer Unit
SS-101-KIT Tools & Accessory Kit
SPARE PARTS, ACCESSORIES & ATTACHMENTS
Model:
PS-200
PS-200-ADAP Adaptor Image Coming Soon
PS-200-BATT Battery Image Coming Soon
PS-200-MOP Mop Cloth Image Coming Soon
Model:
F25
F25-GRBRUSH
Grey Universal/Medium
Bristle Brush Set
F25-BRUSH
Brown Soft Bristle Brush Set
CONTACT US FOR FULL RANGE OF SPARE PARTS
CONTACT US FOR FULL RANGE OF SPARE PARTS
Model:
M30
CONTACT US FOR FULL RANGE OF SPARE PARTS
550 Air Watts
# V550/600-20 Motor
Part # V550ST
600 Air Watts
Part # V600AL
# V600/700-2 Foam Filter
# V550/600-20 Motor
700 Air Watts
Part # V700AL
# V600/700-2 Foam Filter
# V700-8 Motor
# VSABRE
VSABRE/CUTL-WAND Carpet Wand
VSABRE-1/2 Cover & Gasket Set
VSABRE-111 Large Filter
VSABRE-36 Gasket for OLD Motor 13mm
VSABRE-36-NEW Gasket for NEW Motor 5mm
VSABRE-43 Filter for Water
VSABRE-51 Rear Wheel
VSABRE-74 Quick Disconnect Female
VSABRE-DRAIN Complete Drain Hose
VSABRE-68A Pump
VCUTLASS-LOCK Valve Lock
VSABRE-109 Gasket for Filter Support
VSABRE-112 Cylindrical Pin
VSABRE-37-NEW NEW 2023 UPGRADED Motor
VSABRE-1322
New Motor Adaptor (for older Sabre)
VSABRE-47 Neoprene Washer
VSABRE-7 Switch
VSABRE-75 Panel Gasket
VSABRE-HOSES Short Complete Hose
VSABRE-110 Support for Large Filter
VSABRE-113 Complete Moving Part Float
VSABRE-39 Gasket for OLD Motor 3mm
VSABRE-39-NEW Gasket for NEW Motor 10mm
VSABRE-48 Front Wheel
VSABRE-73A Extension for Metal Coupling
VSABRE-81 Complete Cable Sheath / Wires / Terminal
VSABRE/CUTL-HBCOM
GVAC & Solution Hose Set
SPARE PARTS
VSABRE-JR-1/2 Lid/Gasket Set
VSABRE-JR-27 Stud
VSABRE-JR-33/34 Lid Clip with Screws
VSABRE-JR-WAND 1 Jet Wand
VSABRE-JR-26 Wheel
VSABRE-JR-10
Quick Disconnect Male
VSABRE-JR-9
Quick Disconnect Female
VSABRE-JR-NOZZLE Nozzle for Wand
VSABRE-JR-KEY Key for Pump Disassembly
M097 Motor
VSABRE-JR-PUMP Pump
VSABRE-JR-HBCOM Vacuum & Solution Hose
C17-36-110 Handle
C17-36-102 Filter Cage
C17-36-126 Hose Cuff
C17-36-20 Roller Brush w/o Bearing
C17-36-30 Toothed Pinion Powerhead
C17-36-88 Locking Bar
C17-36-97 Canister Lid Latch
C17-36-HEPA HEPA Filter
C17-36-12 Pedal Lever Tension Spring
Part No:
C17-36
C17-36-11 Pedal Lever
C17-36-125 Suction Hose
C17-36-98 Spring for Lid Latch
C17-36-21 Right Bearing Roller Brush
C17-36-33 Powerhead Motor
C17-36-45 Bearing Roller Brush
C17-36-14 Grey Wheel
C17-36-61 Cable Guide Grommet
C17-36-83 Vacuum Motor
C17-36-28 PCB Board
C17-36-4 Micro Switch Powerhead
C17-36-46 Toothed Belt Roller Brush
C17-36-75 Star Screw (Set of 2)
C17-36-9(NEW) Connecting Black Cable
C17-36-85 Motor Gasket
C17-36-93 On/Off Button
C17-36-99 Canister Lid (Front)
VD-65L DEHUMIDIFIER
VD-85L DEHUMIDIFIER
# VD-65/85L-13 Main Control Board
# VD-65/85L-24 Drainage Pipe
# VD-65/85L-34 Temperature Sensor
# VD-65L-33 Humidity Sensor
# VD-65L-36 Water Pump Stopper
# VD-65L-33 Drain Pump
# VD-65L-4 Fan Motor
# VD-85L-37 Drain Pump
Model:
XD-165L-01 Wheel Axis
XD-165L-02 U-shaped Retainer for Big Wheel
XD-165L-03 Wheel Cover (pair)
XD-165L-04 10” Wheel
XD-165L-05 U-shaped Fixator for Wheel (2pc)
XD-165L-17 Water Pump Box Cover
XD-165L-20 Water Pump Assembly
XD-165L-23 Water Hose Male Connector
XD-165L-26 Humidity Sensor
XD-165L-27 Defrost Sensor
XD-165L-28 Temperature Sensor
XD-165L-30 Air Inlet Grille Cover
XD-165L-31 Stainless Steel Intake Filter
XD-165L-32 Heat Exchange Assembly
XD-165L-35 Motor with Fan
XD-165L-37 Air Outlet Grille Cover
XD-165L-41 Machine Handle
XD-165L-44 Water Hose Female Connector
XD-165L-50 PCB Box Cover
XD-165L-51 PCB
XD-165L-52 Display Board Holder
XD-165L-54 Display Circuit Board
XD-165L-55 Panel Decal
XD-165L-60 Display PCB Cable
XD-165L-62 Control Circuit Board
XD-165L-63 Fan Capacitor
XD-165L-PLUG 10 amp Male Plug
®
# B-4-31
# B-4/24/27-13H
# B-4/24/27-23
# B-4/24/27-24
Filter Set
Screw On Hose (Heavy Duty)
Round Nozzle
Flat Nozzle
# B-4/24/27-26 Cone Nozzle
# B-4-04
# B-4-10
# B-4-13
Rear Cover with Baffle
Motor
Power Cord (3m)
# B-4-17 Left Housing
# B-4-18
Switch Knob
# B-4-22 Right Housing
# B-4-27
# B-4/24/27-19
Motor Brush 1 Set (2pcs)
Switch Knob
# B-2/4/24/27-23 Rubber Feet
# B-18-01
# B-18-02
# B-18-03
# B-18-05
Airflow Switch Knob
Heating Switch Knob
Power On/Off Switch
Variable Speed/Heater Switch
# B-18-08 Motor
# B-18-10
# B-18-12
Fan Bushing
Power Circuit Board EC1802E
# B-18-13 Power Circuit Board EC1801E
# B-18-24
Heating Element Assembly
# B-18-25 Heat Protection
# B-18-30
# B-18-31
# B-18-33
# B-18-34
# B-18-35
# B-18-37
# B-18-40
# B-18-41
# B-18-42
# B-18-43
# B-18-44
# B-18-45
# B-18-47
# B-18-48
Filter Cover
Filter Sponge
Stand Pipe w/ Machine Head
Stand Pipe Ring Long Screw
Stand Pipe
Stand Pipe Connector
Stand Adjustment Handle
Foldable Legs
Leg Wheels (1 set) 5pcs
Screw (ST5*18) - 5pcs
Stand Base Board
Washer 12.5 for Stand
Stand Handle
Power Cord
VERA-114109
Model: VFLOORY
AF943S Synthetic Dust Bags (10pk)
VERA-106016 Switch Electric
VERA-106018 Latch Red
VERA-114107 Motor Bearing Bottom
VERA-114108 Motor Bearing Top
VERA-114109 Motor 700W
VERA-114209 Complete Hose Assembly
VERA-114217 Power Cord 10m Red
VFLOORY-114118 Cloth Filter Basket
VERA-114209 Complete Hose Assembly
VERA-117113 Performance Regulator
VFLOORY-106023 Back Wheel
VFLOORY-106024 Castor D50
AF943S Synthetic Dust Bags (10pk)
VERA-106016 Switch Electric
VERA-106018 Latch Red
VERA-111132 H13 HEPA Filter Cartridge
VERA-114107 Motor Bearing Bottom
VERA-114108 Motor Bearing Top
VERA-114109 Motor 700W
VERA-114209 Complete Hose Assembly
VERA-114217 Power Cord 10m Red
VERA-117101 Cloth Filter Basket
VERA-117107 Cord Rewind
VERAP-117114 Back Wheel
VERAP-117115 Castor D60 Rubber
VERAP-117121 LED
VERAP-117128 Display
VERAP-117129 Power Control
VERAP-117131 Wire Set
VERAP-117132 Performance Regulator
VERAP-CB Carbon Brush for Cord Rewind
SPARE PARTS & ACCESSORIES
AF943S Synthetic Dust Bags (10pk)
VERA-106016 Switch Electric
VERA-106018 Latch Red
VERA-111132 H13 HEPA Filter Cartridge
VERA-114107 Motor Bearing Bottom
VERA-114108 Motor Bearing Top
VERA-114109 Motor 700W
VERA-114209 Complete Hose Assembly
VERA-114217 Power Cord 10m Red
VERA-117101 Cloth Filter Basket
VERA-117107 Cord Rewind
VERA-117112 Back Wheel
V-WKING-109065 Castor D60
VERA-117113 Performance Regulator
VERA-114109
VERA-114209
AF943S
VERA-117101
VERA-111132
V-SE7-107010 Triangle Nozzle
V-SE7-107011 Upholstery Nozzle
V-SE7-107012 Hose Assembly
V-SE7-107013 38mm Rods (Pair)
V-SE7-107015 Water Hose
V-SE7-107016 Lid Assembly
V-SE7-107023 Fast Connector
V-SE7-107024 Motor
V-SE7-107035 Pump with 107036 Hose Kit Set
V-SE7-107012
V-SE7-107013
Model: V-WKING
SPARE PARTS
V-WKING-101020 Fleece Filter Bags (5pk)
V-WKING-109030 Middle Gasket
V-WKING-109031 Bottom Gasket
V-WKING-109057 Cylinder
V-WKING-109058 H13 HEPA Filter
V-WKING-109064 Rear Wheel Set
V-WKING-109065 Castor D60
V-WKING-109069 Hose Assembly
V-WKING-109117 Motor
VERA-106016 Switch Electric
V-WKING-109046 Air Housing Set
V-WKING-109048 Filter Sponge
VERA-106018 Latch Red
V-WKING-101020
V-WKING-109058
V-WKING-109117
V-N80-101091 Motor Gasket
V-N80-102012 Cloth Filter Bag
V-N80-102013 Complete Hose
V-N80-102109 Rear Wheel Set
V-N80-102021 Clip Set
V-N80-102023 Frame
V-N80-102028 Washable Filter Cartridge
V-N80-102031 Fleece Filter Bags (5pk)
V-N80-103013 Power Switch
V-N80-103014 Capacitor
V-N80-104010 Front Wheel
V-WKING-109117 Motor
SPARE PARTS
Model: V-N51
V-N51-102024 Inlet D38 Complete
V-N51-110031 Clip Set
V-N51-110042 Pump
V-N51-110045 Front Wheel
V-N51-110046 Rear Wheel Set
V-N51-110048 Filter Net Bag
V-N51-110049 Suction Hose Assembly 7m
V-N51-110053 Drain Hose Assembly 10m
V-N51-110072 Power Cord 10m
VERA-106016 Switch Electric
V-WKING-109117 Motor
V-WKING-109046 Air Housing Set
V-WKING-109048 Filter Sponge
# VMEDUSA-0 Quick Charger
# VMEDUSA-1 Battery
# VMEDUSA-3 Angle for Telescopic Pole
# VMEDUSA-7 Complete Engine
# VMEDUSA-9 Back Wheels Set
# VMEDUSA-11 Front Wheels Set
# VMEDUSA-12 Belt
# VMEDUSA-15 Complete Swing Arm
# VMEDUSA-19 Main Brush
# VMEDUSA-20 Side Brushes (Pair)
# VMEDUSA-BUTTON Switch Button
# VMEDUSA-HANDLE Handle
# VMEDUSA-SWITCH Switch
& Blower
NEW BRUSHLESS MOTOR KIT TO SUIT AEROLITE FLASH BATTERY BACKPACK
SYNTHETIC VACUUM BAGS 5-PACK
Part No: AF500S
BATTERY CHARGER TO SUIT AEROLITE FLASH BATTERY BACKPACK BATTERY PACK TO SUIT AEROLITE FLASH BATTERY BACKPACK
Cleanstar has introduced a Warranty / Returns Policy to provide customers with step-by-step instructions and procedures that MUST be followed prior to returning any product/s to our warehouse for credit, repair or replacement. A reason for a return may include (but not limited to) the stock being:
• Damaged in transit
• Incorrect goods ordered
• Products received do not correspond to purchase order
• Warranty (i.e. faulty products, etc)
All claims must be made within seven (7) days of receipt of goods. We will not accept goods that have been returned without prior approval from Cleanstar. All unapproved returns will be refused and returned to the customer at the customer’s expense.
Follow this procedure for any product that HAS NOT been sold to an end-user and/or has been identified as being damaged or allegedly faulty when it was delivered to you from Cleanstar (i.e. damaged in transit, etc).
1. Ensure that you have your Cleanstar invoice or other acceptable proof of purchase ready.
2. Contact Cleanstar on (03) 9460 5655 immediately and provide a detailed description of the issue (i.e. fault, damage, etc).
3. Cleanstar will ask you to complete and send back a Stock Return Request Form. We may also ask you to email us supporting photos, video or documentation concerning the product.
4. Once Cleanstar has had the opportunity to assess your Stock Return Request, we will contact you with the outcome of your request and provide further instructions.
5. If approved, we will ask you to return the product back to us for further assessment so we can determine the nature and cause of the fault/damage and if it is covered under the applicable warranty terms (i.e. was the item damaged in transit, was it a manufacturer fault, etc). The cost of freighting the product back to Cleanstar will be at the customer’s expense, unless advised otherwise by Cleanstar.
6. Once Cleanstar has had an opportunity to fully assess the product and determine the nature and cause of the fault/damage, we will contact you with the outcome of our assessment and provide you with further instructions regarding a replacement, repair or warranty/credit claim.
Follow this procedure for any product that HAS been sold to an end-user and has been returned due to an identified fault after being used.
1. Ensure that you have your Cleanstar invoice or other acceptable proof of purchase ready.
2. If an end-user returns a product claiming that it is faulty or does not work properly, first you must gather all of the available information from the customer to ascertain the reason/s why the product is faulty or does not work. This may involve a brief inspection of the product yourself and finding out how the product has been used and in what environment.
3. In the case of vacuum cleaners, you should first ensure that all filters and bags are emptied and cleaned, the vacuum hose and any floor tools/attachments/rods are clear of any debris or blockages, the machine has been assembled correctly and has been used only according to the operating instructions.
4. If this does not fix the problem, then you must contact Cleanstar on (03) 9460 5655 immediately and provide a detailed description of the issue (i.e. fault, damage, etc).
5. Cleanstar will ask you to complete and send back a Stock Return Request Form. We may also ask you to email us supporting photos, video or documentation concerning the product.
*** DO NOT automatically provide your customer with a replacement product or credit until Cleanstar has had an opportunity to assess the product thoroughly. Take down the customer’s contact details and let them know that the product will need to be assessed before taking further action.
6. Once Cleanstar has had the opportunity to assess your Stock Return Request, we will contact you with the outcome of your request and provide further instructions.
7. If approved, we will ask you to return the product back to us for further assessment so we can determine the nature and cause of the fault/damage and if it is covered under the applicable warranty terms (i.e. was it caused by the end-user, was it the result of unintended use or inappropriate handling, has the product been assembled incorrectly or not used according to the operating instructions, was it a manufacturer fault, etc). The cost of freighting the product back to Cleanstar will be at the customer’s expense, unless advised otherwise by Cleanstar.
8. Once Cleanstar has had an opportunity to fully assess the product and determine the nature and cause of the fault/damage, we will contact you with the outcome of our assessment and provide you with further instructions regarding a replacement, repair or warranty/credit claim.
Cleanstar reserves the right, at its absolute discretion, to:
• Determine whether to provide a customer with a credit, repair or replacement item as appropriate
• Apply a re-stocking fee of up to 20% of the original purchase price
• Assess the condition and age of the returned goods (including its packaging) prior to authorising a credit, repair or replacement
• Refuse a credit, repair or replacement under certain circumstances
All goods returned for credit under the following scenarios (but not limited to these scenarios) will be the subject of a 20% re-stocking fee, at management’s discretion:
• Goods that were placed on special order (i.e. products not regularly stocked by Cleanstar)
• Goods ordered incorrectly by a customer (ie. wrong part no. quoted on purchase order, etc)
• Goods returned because stock can not be sold
• Goods returned after an extended period of time
• Goods returned because you have changed your mind about your purchase
Cleanstar will only offer credit for goods returned under the above scenarios provided that the product:
• Is in resaleable condition
• Is in its original packaging, including instruction manuals and all accessories
• Is unopened, unused and in its original condition If these requirements are not satisfied, Cleanstar reserves the right not to offer a credit.
Cleanstar will accept product returns and may provide you with either a credit, repair or replacement where:
• The product is faulty or not of acceptable quality
• The product is not fit for its intended purpose
• The product does not match the sample or our description
• You can present your Cleanstar invoice or other adequate proof of purchase
Cleanstar may elect to return the product to the manufacturer or their nominated repair agent to determine the nature of the problem. If the product is determined to be faulty, not of acceptable quality, not fit for purpose or not matching a description or sample, Cleanstar will offer a credit, repair or replacement. If you cannot present your Cleanstar invoice or other acceptable proof of purchase, Cleanstar reserves the right not to offer a credit, repair or replacement.
This policy is current as at 1 JANUARY 2025.