How to Configure Static Routes on Cisco Routers

How to Configure Static Routes on Cisco Routers ?

Configure two types of routing on the router- static and dynamic to send the traffic to destination

Details to Configure Static Routes on Cisco Ro uters • You can configure two types of routing on the routerstatic and dynamic to send the traffic to destination.

Static route tell the network devices about exact locat ion (hard-coded destination). Static routers can work well with small network but in large scale network dy namic routing is the best choice. Configure static rout es between routers to allow data transfer between ro uters without the use of dynamic routing protocols.

How to configure s tatic routes on Cisc o routers From the global configura tion mode, configure the hostname then configure the console and enable p ass words on each router.

Notes: To configure static routes, first enter global c onfiguration mode to run the following commands.

• 单击此处编辑母版文本样式 – 第二级 – 第三级 • 第四级 – 第五级

Configure the Static Routes on Router A.

• First run the command show ip route to view the IP routing table for router A befo re defining static routes • RouterA#configure terminal

(enter in global configuration mode)

• RouterA(config)#ip route 15.0.0.0 255.0.0.0 10.1.1.2 uter A)

(define static routing on Ro

• RouterA(config)#ip route 193.168.2.0 255.255.255.0 10.1.1.2 ng on Router A)

(define static routi

• RouterA(config)#ip route 193.168.3.0 255.255.255.0 20.1.1.2 ng on Router A)

(define static routi

• RouterA(config)#exit • RouterA# • Now run the command show ip route on router A to view the IP routing table (dire ctly connected + static routes) detail.

Configure the Static Routes on Router B. First run the command show ip route to view the IP routing table for router B before defining static r outes • RouterB#configure terminal

(enter in global configuration mode)

• RouterB(config)#ip route 20.0.0.0 255.0.0.0 10.1.1.1

(define static routing on Router B)

• RouterB(config)#ip route 193.168.1.0 255.255.255.0 10.1.1.1

(define static routing on Router B)

• RouterB(config)#ip route 193.168.3.0 255.255.255.0 15.1.1.2

(define static routing on Router B)

• RouterB(config)#exit • RouterB# Now run the command show ip route on router B to view the IP routing table (directly connected + s tatic routes) detail.

Configure the Static Routes on Router C. First run the command show ip route to view the IP routing table for router C before defining static r outes • RouterC#configure terminal

(enter in global configuration mode)

• RouterC(config)#ip route 10.0.0.0 255.0.0.0 15.1.1.1

(define static routing on Router C)

• RouterC(config)#ip route 193.168.2.0 255.255.255.0 15.1.1.1

(define static routing on Router C)

• RouterC(config)#ip route 193.168.1.0 255.255.255.0 20.1.1.2

(define static routing on Router C)

• RouterC(config)#exit • RouterC# Now run the command show ip route on router C to view the IP routing table (directly connected + s tatic routes) detail.

More Related: Specifying a Next Hop IP Address for Static Routes

http://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a00800ef7