HOANG CHUONG NGUYEN_PORTFOLIO_2023

Leonardo da Vinci

“Simplicity is the ultimate sophistication.”

339-345 Toorak Road, South Yarra, VIC 3141, Australia

ELENBERG FRASER

APRIL

111-125 A’Beckett, Melbourne, VIC 3000, Australia ELENBERG FRASER DEC 2016 - AUG 2017 |

Melbourne, VIC 3000, Australia

SA

320 Plummer Street, Port Melbourne, VIC 3207, Australia

ELENBERG FRASER

168 Norton Street, Leichhardt, NSW 2040, Australia

Ebley Street, Bondi Junction, NSW 2022, Australia

17–31 Cowper Street and 2A–2D Wentworth Park Road, Glebe, NSW 2037, Australia

ROCKLEY GARDENS

339-345 Toorak Road, South Yarra, VIC 3141, Australia

A medium-sized project but not simple, even quite sophisticated in terms of product layout, facade configuration and fitouts.

ISSUED BY

ROCKLEY GARDENS

Worked as a gradute architect, assited the project team with carrying out the architecture and interior drawings through MK to DD phase.

The success in this project is to ensure all the sophisticated details match the aesthetic design intent and all coordination accomplished timely.

GENERAL NOTES

2. DRAWINGS TO BE READ IN CONJUNCTION SPECIFICATION BRIEF, ARCHITECTURAL SPECIFICATION, GEOTECHNICAL, STRUCTURAL, SERVICES, LANDSCAPE OTHER CONSULTANTS DOCUMENTATION.

3. BUILDING CONTRACTOR TO NOTIFY ARCHITECT/ OF ANY DISCREPANCY IN DOCUMENTATION & PRIOR TO CONTINUING WITH THE WORK.

4. CONTAMINATED/HAZARDOUS MATERIALS CONSULTANTS DOCUMENTATION.

5. REFER STRUCTURAL ENGINEER FOR PILE

6. BUILDER TO ENSURE PROTECTION TO ALL PRIOR TO BEGINNING WORK.

conditions. Subject only to the Consultancy Agreement:

1. this document and all intellectual property rights in it remain the property of Elenberg Fraser and may not be changed, u sed, reproduced, provided or disclosed by or to any person without the written consent of Elenberg Fraser, and only then with clear identification of Elenberg Fraser as author and owner and of all changes made.

2. each user must:

(a) not scale any drawing, use figured dimensions only and verify all dimensions;

(b) only use this document in conjunction with all other relevant Project documents, specifications and information from any person;

(c) where this document is issued in electronic form, make all appropriate electronic data, systems and document checks and comply with all third party proprietary software requirements;

(d) properly form their own�opinion as to the correctness and sufficiency of the document for their purposes and notify Elenberg Fraser immediately upon becoming aware of any issue;

3. to the maximum extent permitted by law, all conditions and warranties concerning this document are expressly excluded and each user accepts fully and will appropriately insure for all risks and releases and indemnifies Elenberg Fraser from and against all claims, liabilities, loss, costs and expenses arising out of or in connection with any use, reliance upon, reproduction or disclosure of or change to this document.

LEVEL CHANGE SLAB PENETRATION INSITU CONCRETE SERVICES RISER - BLOCKOUT PRECAST CONCRETE BLOCKWORK WALL INSITU CONCRETE STRUCTURAL ENGINEER DOWNPIPE LEVEL APARTMENT WINDOW NUMBER REFER LEVEL / APARTMENT DOOR NUMBER REFER 2HR FIRE RATED WALL WALL TYPE W## ## ### D## W# DP FIRE EXTINGUISHER INTERCOM POINT FE AC AIR CONDITIONER XBA BALUSTRADE FCO CONCRETE FLOOR F-- FLOOR FINISH AS SCHEULED FR FIRE HOSE REEL WLV LOUVRES XSR SCREEN ROOM NAME ROOM NUMBER FLOOR FINISH JOINERY TYPE REFERENCE BATHROOM A01* TMI-01 REFER 2602 BATH TYPE 01 FLOOR WASTE FW D FOX P TV COMMS OUTLET - DATA COMMS OUTLET - FOXTEL COMMS OUTLET - PHONE COMMS OUTLET - TV 0 GPO - DOUBLE GPO - DOUBLE (EXTERIOR) GPO - SINGLE GPO - SINGLE (EXTERIOR) SWITCH NBN POINT NBN INT MB CB METER BOX LOCKABLE CIRCUIT CODE DESCRIPTION DB ELECTRICAL DISTRIBUTION 1 50 APARTMENT TYPE A02 - PLAN 3 4

339-345 TOORAK ROAD, SOUTH YARRA

TYPICAL KITCHEN DETAILS

UNO

111-125 A’Beckett, Melbourne, VIC 3000, Australia

This is Uno - our new mixed-use project featuring apartments, a hotel and a childcare centre.

At first glance, most think that it is a boring, simple building shape locates in the epicentre of Melbourne’s CBD. However, its iridescent sheen makes it stand out. A special glass technique was adopted which permits dichroic glass, shifting fluidly between copper and sandstone tones, depending on the angle it’s viewed from. Whilst the its shimmering makes it a new iconic landmark of Melbourne’s skyline, its podium design mediates past and the future so well through the arrays of fenestrated boxes.

UNO

111-125 A’Beckett, Melbourne, VIC 3000, Australia

Worked as an architect who is responsible for producing the Revit clone for the both offices and standardizing the benchmark of all drawings packages through all the project’s phases.

380 MELBOURNE

380 Lonsdale Street, Melbourne, VIC 3000, Australia

This is one of Elenberg Fraser super towers in the CBD, it is actually a two-in-one tower. One houses a hotel, the other apartments, and both are united by a low-level podium with eroded massing that contains separate pods for office space, a business club, dining and health facilities and retail.

380 MELBOURNE

380 Lonsdale Street, Melbourne, VIC 3000, Australia

Participated in the early stage of 25 design developement till the beginning of its construction of documentation, the whole project is such a masterpiece. Its enchanting, complex facade along with the very high expectation from the client who is also the builder makes this project a fascinating journey ever. In order to achieve that such perfection, effective workflows as well as inventive techniques were adopted.

REALM

9-19 Austin Street, Adelaide, SA 5000, Australia

This is our first high-rise building in Adelaide and it wouldsurprise you that its 132 metre height making it the tallest residential building in the city.

A thoughtfully folded, glowing gold lantern rising above the mass of historic buildings at its base.

A thoroughfully clever incorporation of an existing arcade and heritage building into the podium is just the way we mediate past, present and future. Whilst the shimmer tower facade where the perforated screens themselves protect the occupants inside from wind and solar; together with silver balustrades and reflective glass - the whole building actually remarks the Adelaide skyline.

REALM

9-19 Austin Street, Adelaide, SA 5000, Australia

Managed a project team to work through the DD to CD and as-built stage, carried out full drawing packages. Additionally, liaised closely with the Australian design team and consutants to meet the design intent of each particular purchaser variation.

Assisted with the as-built process with coordinating and tracking every updates on the site timely.

320 PM

320 Plummer Street, Port Melbourne, VIC 3207, Australia

“Garden city” - this is all what this project is about. Three buildings grace the landscaped grounds. Two of them are residental which looks out the beach and looks over the CBD respectively, the other one which is the tallest tower is a mixed use of serviced apartment and penthouses. The podium houses both three tower facilities and elevent townhouses. Locates in the most livable city of the world - this project has taken the definition of resort to new heights through a series of facilities which are cleverly incorporated into the stimulating communal areas.

SPRING STREET

16 Spring Street, Box Hill, VIC 3128, Australia

This is our new mix-used project in Box Hill where TAFE Box Hill institue housed along with a series of apartments and their facilities. It has been completed the Value Management and about to commence the 100 Design Developement shortly.

SPRING STREET

16 Spring Street, Box Hill, VIC 3128, Australia

Participated in this project after its 75 Design Development, was in charge of ensuring to project was ready for the Tender and VM process. On top of that, building a solid foundation for the construction phase was also a significant success of the project team.

ASPIRE

295 & 307-309 King Street, Melbourne, VIC 3000, Australia

This is Aspire Melbourne, our new multi-residential project in Melbourne’s West end. The project was very successfull in collecting the characteristic elements of its site-specific identity.

The impressive concave and convex silver glass facades reinterpret the fluttering of the flag against the flagstaff. This is also the most difficulty of this project and really put the project team into a challenge. Fortunately, the experiences in the previous highrise buildings massively helped successfully work out this complex facade.

disclosure of or change to this document.

own opinion as to the correctness and sufficiency of the document for their purposes and notify Elenberg Fraser immediately upon be coming aware of any issue;

3. to the maximum extent permitted by law, all conditions and warranties concerning this document are expressly excluded and each user accepts fully and will appropriately insure for all risks

1 300

disclosure of or change to this document.

3/19/2020 2:55:05 PM 14051 DD 295 & 307309 KING STREET AURUMLAND PTY LTD A0902 EAST ELEVATION ELEVATIONS A19.12.2018ISSUED FOR 25% DD MC B08.02.2019ISSUED FOR 50% DD MC C31.10.2019ISSUED FOR INFORMATION MC D19.12.2019ISSUED FOR INFORMATION MC E20.03.2020ISSUED FOR 100% DD MC 27

ASPIRE

295 & 307-309 King Street, Melbourne, VIC 3000, Australia

Took over this project when it had been at 75 Design Developement, my responsibility was to develop it to 100 Design Developement, incorporate all Value Management revisions, get the project totally ready for the Constrution documentation with the highest quailty as it is considered a flagship project and possibly one of Melbourne's last "super towers".

ASPIRE

295 & 307-309 King Street, Melbourne, VIC 3000, Australia

UNITING NORTON

STREET

168 Norton Street, Leichardt, NSW 2040, Australia

Took over this project post the DA stage, our project team had been collaboratively and effectively liasing with the builder Growthbuilt to successfully deliver one of the best buildings in Inner West.

Uning Norton Street offers 49 independent living apartments, private clubroom featuring entertainment, dining, and kitchen with access to courtyard facilities.

UNITING NORTON STREET

168 Norton Street, Leichardt, NSW 2040, Australia

Started this project from 75% DD and developed it until it was done on site under the instruction of project architects, I prepared the primary drawing packages including General Arrangement Plans, Partition Plans, Reflected Ceiling Plans, Concrete Profile Plans, Elevations, Sections, Stairs and Core Details, Facade Section Details, Plan Details, Wall Types, Ceiling Types, Window Details, Door Details, and Interior Package.

On top of that, I was responsible for underaking the Revit model health check on a regular basis and also involved in multidisciplinary clash detections.

When it comes to delievering a Design and Construct project, I was required to constantly look at all facade details as well plan details so that the design intent is retained when it comes to concrete and most importantly it must always comply with NCC and relevant Australian Standards.

NOTES

• WALL / SLAB DETAILS AT GLAZING UNIT HEADS AND SILLS ARE ACCURATELY DEPICTED

• WINDOWS, WINDOW BOX FRAMES AND WINDOW HOODS SHOWN INDICATIVELY

• REFER WINDOW FABRICTOR'S SHOP DRAWINGS FOR GLAZING UNIT DETAILS

• REFER FABRICATOR'S SHOP DRAWINGS FOR WINDOW BOXFRAME AND HOOD DETAILS

• ALL TILED FLOORS DIRECTLY ABOVE A HABITABLE SPACE MUST BE PROVIDED WITH ACOUSTIC UNDERLAY IN ACCORDANCE W/ THE ACOUSTIC CONSULTANT'S SPECIFICATIONS

• REFER SHOP DRAWINGS AND STRUCT. ENG's DOCUMENTS FOR GLAZED AWNING DETAILS

• FINISHED LEVELS FOR TILED AREAS SHOWN INDICATIVELYACTUAL LEVELS WILL VARY DUE TO SURFACE FALLS

• REFER GENERAL ARRANGEMENT PLANS FOR INVERT LEVEL OF OVERFLOW SPITTERS

UNITING MARION STREET

17 Marion Street, Leichardt, NSW 2040, Australia

This is another Senior Living project that the project team from GroupGsa successfully delivered for the reputable client Uniting in partnership with Growthbuilt.

The project features a 69 Independent Living Units that carefully arranged in two 6-storey buildings, being built upon a podium, one level basement car park.

UNITING MARION STREET

17 Marion Street, Leichardt, NSW 2040, Australia

Took over this project from the DA Architect - Morrison Design Partnership, I had been working closely with the project team, the builder and all other consultants to deliver this project towards the construction.

Being involved in this project from the very first, I had an opportunity to hold numerous responsibilities, namely preparing primary drawings, schedules, Revit model health checking, assisting project architects with reviewing shopdrawings, resolving RFIs from builder and consultants, and reviewing the project against BCA, Accessibility compliances.

BOND BONDI JUNCTION

Ebley Street, Bondi Junction, NSW 2022, Australia

This project is truely a masterpiece in one of the most iconic beach surburbs Bondi. Designed by GroupGSA, the whole building is an articulated butterfly form sitting on a heritage podium that also features a reimagined RSL club and a destination retail. My role in this project was to liaise with the project and other consultant teams as well as the builder Westbourne to finalize 100 Construction Documentation.

BOND BONDI JUNCTION

Ebley Street, Bondi Junction, NSW 2022, Australia

My role in this project was to liaise with the project and other consultant teams as well as the builder Westbourne to finalize 100 Construction Documentation.

With years of experience in delivering various ranges of residential building, I was responsible for managing the primary packages, namely General Arrangement Plans, Concrete Setout Plans, Partition Plans, Reflected Ceiling Plans, Fire Compartmentation Plans, Signage Plans, Facade Section Details, Plan Details, Window and Door Details, Interior Package, Signage Details, and Waterproofing Details.

In order to successfully deliver this project, it is worth mentioning an efficient collaboration between myself and the rest of the project team throughout the project development. Additionally, a constant attention paid to Revit model health check on a regular basis also added a value to the ultimate success of the Bond.

COWPER STREET GLEBE

17-31 Cowper Street & 2A-2D Wentworth Park Road, Glebe, NSW 2037, Australia

Appointed by KANE Construction to deliver this project as a D&C contract, we are collaboratively and closely working with KANE Construction, NSW Land and Housing Coporation, TTW (Facade, Structure, Civil), Inngen (Sevices) and Scientific Fire Services to ensure the project could be handed over to future tenants in 2024.

What makes this complex stand out from any other project around Sydney is its sustainable, environmentally friendly CLT structure (Cross Laminated Timber). The adoption of this material to this project not only helps reduce a significant amount of carbon footprint, but also benefits the construction program due to its rapid, efficient process from manufacturing off-site in factories to installation on-site.

COWPER STREET GLEBE

17-31 Cowper Street & 2A-2D Wentworth Park Road, Glebe, NSW 2037, Australia

This was the first CLT project we have ever delivered in GroupGSA, it has been challenging the project team since the first days with a lot of questions from the client NSW Land and Housing Coporation, and NSW Building Commissioner Office about construction buildability, sequence, waterproofing, fire safety. The project team has closely liaised with the CLT manufacturer (NSW XLAM), Fire engineer Scientific Fire Services, Waterproofing consultant Waterproofing Integrity, Facade and Strucutre Engineers TTW to come up with the best approach, details to ensure every single detail satisfies the NCC, Australian Standards and also meets the fast-paced construction programe. Due to the complexity of the project (combination of Concrete and Cross Laminated Timber), my main responsibility in this project is to make sure a continuous coordination with all stakeholders conducted on a daily basis, to prepare up-to-date and NCC compliant drawings, schedules, specifications to keep the site going.

COWPER STREET GLEBE