Simple Steps To Reset Your Seagate NAS Username And Password

Simple Steps To Reset Your Seagate NAS Username And Password Reset Seagate Nas Username And Password:

Fig.reset seagate nas username and password

Seagate Business NAS: When you have forgotten the username or password of the Seagate Business NAS device, carry out the step-by-step instructions that how to reset seagate NAS provided here 1.

Mostly, the Reset button is located at the rear side of the Seagate Business NAS device.

2.

Note: The Reset button’s location depends on the model of the NAS device.

3.

Check if the Seagate Business NAS device is turned up.

4.

Hold the Reset button on the Seagate Business NAS device using a paper clip.

5.

Note: The Reset button must not be holding more than 10 seconds.

6.

The device’s name will be reset to its default. Also, the assigned static IP address will be reset.

7.

The DHCP feature will also be re-enabled.

8.

Turn off the Seagate Business NAS device. After two minutes, turn on the Seagate Business NAS device.

9.

Open the Seagate NAS Discovery software and use the default username and password to access NAS.

10.

The default username and password of the Seagate Business NAS device are ‘admin.’

11.

Follow the above instruction that how to reset seagate NAS username and password

Seagate BlackArmor NAS: If you want to reset the Seagate BlackArmor NAS device to the factory default settings, follow the easy guidelines provided on this web page.

1.

Before proceeding with this procedure, you must backup all your data from the Seagate BlackArmor NAS device.

2.

First, download the Factory Reset tool from its official website.

3.

Once done with downloading, open the FactoryDefault.exe file. Now, the factory to default application will appear on the screen.

4.

Enter the correct MAC address of the Seagate BlackArmor NAS drive in the appropriate field.

5.

After clicking the Calculate button, right-click and copy the link that appears in the next field.

6.

Go to your computer, launch a web browser, and enter the IP address of the Seagate BlackArmor NAS drive.

7.

This will launch the Seagate BlackArmor NAS drive’s login page.

8.

Type one forward slash at the end of the NAS drive’s IP address and paste the link that was displayed on the Factory Reset tool.

9.

10.

The Default Configuration web page will be displayed on the screen.

Click the Factory Restore button followed by the OK button. This reset process may take up to 2-12 hours.

11.

By using these steps that how to reset Seagate NAS username and password.

Visit the link, ”https://backup-plus.co/how-to-reset-seagate-nas/” for detailed informations about Seagate Business and BlackArmor NAS devices related queries.