Sanitary quality control inspection in tangshan, chaozhou city
• General requirement
• The quality of sanitary and accessories is good, in line with customer requirements, and the bulk goods are recognized by customers.
• Products must comply with design requirements, drawings and relevant national, local and industry standards.
• The dimensions are within the allowable error range.
• Good workmanship.
• The product is clean, neat and looks good.
Appearance requirement
1.The surface of the product must be smooth and flat, without any small scratches, or black spots and other defects;
2.The workmanship of bathroom products should be particularly fine, all the joints must be neat, and it will be safe when used.
3.If the joint is not neat, it means that the quality of the bathroom product is relatively poor, and it is very dangerous to use, so when the appearance inspection is conducted, these are all things that need to be considered.
4.The clean surface shall not have cracks, lack of glaze, bump, pit bag, glaze wisp, orange glaze, glaze sticky, embryo powder, falling dirty, smoke, hemp surface, etc.
5.There should be no obvious color difference between a product or a set of products.
6.The surface is not allowed to have fish scale explosion, cracks, porcelain stripping, pinholes, sand holes, concave and convex dots.
Measured data(Product size,Outer Carton size)
