Installing The New Toilet Seat Is Easy – Here Are A Few Quick Steps To The Toilet Seat

Installing The New Toilet Seat Is Easy – Here Are A Few Quick Steps To The Toilet Seat

Replacing a toilet seat is not a big project that you need to appoint a handyman to do. It is simple &straightforward, and you can do it with minimal DIY skills. It will be a 15 to 30 minutes job, and anyone can do it with a bit of effort. Anyone who needs a quick bathroom upgrade will find it to be a simple, economical, and pleasant project.

•

To install new toilet seats, you first need the basic materials for the job. Next, you have to decide the brand of the toilet seat you want to purchase & install. You can buy a Bellavista toilet seat from your nearby hardware store or an online store like Cheap Replacement Toilet Seats. They have a wide variety of new toilet seats for your toilet, and they offer you complete advice to help you identify your Bellavista toilet seat model.

•

The Bellavista toilet seats are designed based on high-density, water-repellent MDF, a type of board that is highly resistant to breakage and impact. It is suitable for your interiors where exposure to water and humidity is high. It will cost anywhere from £130 to £180 or even more based on your specific need.

•

The soft close Bellavista toilet seat comes with nuts, bolts, and hinges to the toilet. You need some essential tools such as a plier, wrench, fastener, cleaning agents, safety gloves and new bolts that come with the seat.

Few instructions to follow to replace a toilet seat:

•Wear the safety gloves clean the old toilet seat, rim, and bowl, and close the lid •Check the backside of the toilet pan. Here you will find two bolts that connect the lid to the bowl.

•The screw is sealed in plastic caps. So you pop off the caps right away.

•Two long bolts are kept in place by nuts on the underside of the lid. To loosen the nuts from the bolts, use the wrench.

•Remove the nuts from the bolts & detach the bolts from the toilet. Separate the seat & lead. You will get the bare toilet rim with two tiny holes at the back.

•You will no longer require any parts from your old seat, so dispose of it carefully.

•Your new seat must have two hinges & bolts affixed to it, & a set of rubber grips & a set of plastic or metal nuts.

•Line up the rubber grips with the hinges, then get prepared to put the new Bellavista toilet seat on the bowl.

•Line up the bolts with the two holes at the backside of the rim. Thread the bolts through the holes, then close the new seat & lid onto the bowl.

•Ensure that the new toilet seat is correctly lined up against the rim.

•On the underside of the lid, find the bolts & thread the new nuts onto them.

•Use the wrench to tighten to the points where the new Bellavista toilet seat & its lid are held firmly in position.

• Address: Unit 3 Global Business Park, 4 HAMBURG ROAD, HULL, East Riding of Yorkshire HU7 0AE

• Phone: 7552414763 • Email: info@cheapreplacementseats.co.uk • Website: https://cheapreplacementtoiletseats.co.uk/