Champion Sheet Materials and Insulation

www.championtimber.com

Sheet Material and Insulation Unrivalled Quality…

Unrivalled Range…

The Ouality Timber Merchants

Unrivalled Service…

~

Champion Timber Why choose Champion for your Timber?

Product range:

We’re the South East’s leading independent timber specialists with over 75 years experience of supplying the building trade. Recently voted again one of the UK’s top performing timber merchants in a customer survey by TRADA*, we’re dedicated to providing you, the professional, with the range and quality of timber that will save you time and money. *TRADE KPI Customer Survey 2003, 2004 and 2006

Branch Distribution Centre – Edenbridge

Quality of product • For our Softwood Planed Timber and Mouldings, we only use prime quality timber, then re-grade and machine it at our extensive Edenbridge mill to meet our own stringent standards.

This is sourced and imported from the most responsibly managed Nordic forestry companies.

• On-going investment in technology ensures quality, accuracy, consistency and with our Planed Timber and Mouldings, a super smooth finish. This guarantees you minimal preparation and wastage, so you save time and money.

Extensive range of timber in stock

Range and breadth of stock • Machining our own timber ensures all of our branches carry a vast range of profiles and extensive stocks, all properly kiln dried. This ensures a continual supply of stock always ready to go for your next job.

• Our selection of around 15000 timber and timber related products ensures more choice and provides a credible single source solution saving you valuable time and money

Investment in technology

High standards of customer service • As accredited Investors in People, Champion employs helpful, knowledgeable, motivated staff who benefit from on-going training and development continuously improving our customer service.

• Unusual or ‘one off’ jobs are no problem as we offer a prompt machine-to-order service from our own mills.

Profile design and matching service

• Reliable, local deliveries, please contact your local branch for more details.

Always keeping ahead • As an independent company, we anticipate and react quickly to changing customer demands and product improvements.

• We comply with all British and International regulations and guidelines regarding sustainability of timber resources and have a clearly defined environmental policy.

Reliable deliveries

• Nine branches already in Surrey and Kent, with more planned.

Excellent customer service TTF

To obtain an estimate or to place an order there are four easy options:

TT-COC-1996 c 1996 FSC A.C. Look for FSC labelled products FSC Supplier The Global Benchmark for Responsible Forest Management

1. Visit your local branch, we’re ready to serve you.

2. Telephone your local branch, we’re ready for your call.

3. Fax your request or order to your local branch.

4. Email your local branch with your request or order.

Please note we accept: Visa, Mastercard, Switch/Maestro, TradePro cards. Branch details are on the reverse of this brochure.

02

www.championtimber.com

/16-37-034

Timber Products Blockboard Chipboard Claddings Cut to size Sheet Material Decorative Boards Decking Doors Fencing Fire Rated Boards Flooring Glulam Laminated Beams Hardboard Hardwood Insulation Joinery Laminates MDF Boards Melamine Faced and Wood Veneered Chipboard Oriented Strand Board Pine Board Plasterboard Plywood Sawn Softwood Staircase Parts Softwood Mouldings Softwood Planed Thermowood Timber Buildings Velux Worktops Windows Timber Accessories Adhesives Bolts Brackets Corrugated PVC Decorators Aids Door and Window furniture Fixings Hand Tools Hangers Ironmongery Locks and Security Mastics Nails Paint Power Tools Screws Woodcare Products

Contents

Contents

CHAMPION at your SERVICE WIDE RANGE with BIG STOCKS • FREE DELIVERY - to a wide area • CUT TO SIZE SHEET MATERIAL - first 2 cuts FREE • RANGE OF LENGTHS OFFERED - reduces waste • SPECIALS OUR SPECIALITY - with our Timber Profiling and Pattern Matching service • OUR BRANCHES STOCK - all the Fixtures, Fittings, Finishes and Tools to go with your Timber and Sheet Material

Again voted by you, our customers, as one of the TOP PERFORMING TIMBER MERCHANTS in the UK (TRADA Survey)

‘CE’ Product Marking

03

Building Regulations Part ‘L’ 2006 Conservation of Fuel and Power 04 Examples to meet Part ‘L1B’ 05-06

Insulation Products Rockwool Roll

07

Rockwool Flexi-Slab

07

Rockwool RWA45 Semi Rigid Slabs

07

Rockwool Cavity Wall Batts

07

Glass Fibre Rolls

07

Celotex GA3000Z, Therma-Break and XR3000 Kingspan Thermapitch TP10

08

Actis Tri-Iso Super 10

09

Expanded Polystyrene

09

Superquilt

09

Thinsulex

09

Kingspan Thermaroof TR31

10

Celotex Tempchek TD3115

10

Building Regulations Part 'E' 2004 Resistance to the Passage of Sound

15

WBP Hardwood

19

Masterboard

15

WBP Birch

19

Supalux

15

Flexible

19

MDF FR Euro Class B & C

15

BBA Approved Construction

19

Shuttering

19

T & G Flooring

19

Marine

19

WBP Hardwood Plywood FR Euro Class B & C

15

Water & Fire Resistant Sheet Material 15

Plasterboard & Accessories Standard

16

Foil Backed Vapour Check

16

Plank

16

Soundshield

11

11 12 13 14 14

Medium Density Fibreboard (MDF)

Thermal Laminate

16

Phenolic Laminate

17

Moisture Resistant

17

Firecheck

17

Screen Panel

22

Decorative MDF

22

Topan Coloured V313 Moisture Resistant

22

Melamine 2 Sides

22

Lacquered 1 Side

22

Wood Veneered

23

Wood Veneered Edging

23

Wood Veneered & Melamine Faced Chipboard 24 & 25

Standard

20

Light

20

V313 Moisture Resistant

20

Wood Veneer

Medex Exterior

20

Flexible Veneer

26

ZF Ecologique

20

Bonded Laminates

26

16 20

Flexible

20

Pre-Cut Handi-Panels

17

WBP Hardwood Plywood

21

Coving

17

MDF

21

Accessories

17

Cut to size Service

21

Hardboard

Standard

18

Standard

21

Flooring Grade T & G Type P5

18

Oil Tempered

21

Perforated

21

Oriented Strand Board (OSB)

18

Insulation Board

21

Blockboard

18

Pinboard

21

Door Blanks

18

Sundeala 'K'

21

Floor Protection Board

Iron-on edging

25

Solid Wood Panel

Bead & Butt V313 Moisture Resistant

Drywall Screws

Chipboard

Acoustic Insulation Products Rockwool Flexi-Slab Reduc Monarfloor Acoustilay Attenu8

Pyrok & Viroc or similar

Hardibacker

08

Plywood

Fire Rated Sheet Material

Pine Panel Pine Stringer

26 26

Pine Stair Tread

26

Oak Panel

26

Worktops Postform Laminate

27

Solid Hardwood

27

Branch Maps & Contact Details

Back Cover

21

CE Certification and Marking of Panel Products and Insulation So as to introduce universally accepted standards and thereby make trading easier between member states, the European Union has introduced CE marking. The CE mark is confirmation that a product has been independently tested and certified as complying with the new product standard and is ‘fit for the purpose’ for which it is intended.

For panel products and insulation, the Construction Panel Directive (CPD) was set up by the industry to set standards for testing and essential requirements that should be considered where relevant, these being • mechanical resistance and stability

• hygiene, health and the environment

• protection against noise

• safety in use

• safety in case of fire

• energy, economy and heat retention

The CE mark does not necessarily have to appear on every board, but can still be sold as CE or CPD compliant. If official written confirmation is required of compliancy, contact the Buying Department at New Malden Head Office on 020 8949 1621.

Further on in this brochure, those products that are CE/CPD compliant are identified as such under their respective headings.

03

Building Regulations Part ‘L’ 2006 Conservation of Fuel and Power Conservation of Fuel and Power requires much more than just good insulation

Example of differences between identical new buildings, one built in 2002 and one in 2006

Updated in April 2006, Part 'L' sets out to make buildings more energy efficient, saving an estimated 1 million tonnes of carbon a year in the UK. For new build

As Built 2002 As Built 2002

U-Value) (0.16 (0.16 U-Value) 100mm 100mm Rock Rock fibre fibre insulation between insulation between joists joists

energy performance standards have been increased by 20% to 28% over the

Compliant Compliant L 2006 PartPart L 2006

U-Value) (0.14 (0.14 U-Value) 100mm Rock fibre Rock fibre 100mm insulation between insulation between joists joists

150mm 150mm Rock Rock fibre fibre insulation over joists insulation over joists

old 2002 regulations and are now based on the 'whole building' Target CO2

200mm Rock fibre 200mm Rock fibre over joists insulation insulation over joists

emission rate rather than meeting stand alone Elemental 'U' values. However on extensions and refurbishment work to existing buildings the Elemental U-value route may be used to show compliance.

Brick outer Brick outer skin skin

Brick outer Brick outer skin skin 0.35 U-Value) (0.35 (U-Value) Full-fillFull-fill CavityCavity Rock Rock 75mm75mm fibre cavity fibre cavity wall wall slab slab

Blockwork 3.5N 3.5N Blockwork

The new Part 'L' is split into 4 parts PlasterPlaster

• L1A

New Dwellings

• L1B

Work on Existing Dwellings

• L2A

New Buildings, other than Dwellings

• L2B

Work on Existing Buildings, other than Dwellings

Part L1A - New Build for Dwellings Five processes the designer/builder must go through to show compliance with Part 'L' of the Building Regulations 1. CALCULATE THE CO2 EMISSIONS: An Energy Performance Certificate must be produced using the SAP 2005 (new dwellings)

U-Value) (0.28 (0.28 U-Value) Full-fillFull-fill CavityCavity 100mm Rock Rock 100mm fibre cavity fibre cavity wall slab wall slab

Blockwork Blockwork (Lambda value 0.15) (Lambda value 0.15)

PlasterPlaster

U-Value) (0.25 (0.25 U-Value) PUR/PIR rigid foam PUR/PIR rigid foam 50mm50mm & beam T&G chipboard Block Block & beam T&G chipboard finish finish

U-Value) (0.22 (0.22 U-Value) PUR/PIR rigid foam PUR/PIR rigid foam 65mm65mm & beam T&G chipboard Block Block & beam T&G chipboard finish finish

WALLS - Full-fill: Brick outer skin - 75mm cavity filled with Rock fibre Cavity Batts 3.5N inner blockwork plastered.

WALLS - Full-fill: Reduce the U-value to 0.28.

Change the 75mm Rock fibre cavity wall slab to 100mm. Change the medium density blockwork to a Lambda value of 0.15 W/mK.

FLOOR - Block and beam with 50mm PUR/PIR rigid foam and T&G Chipboard Decking.

FLOOR - Reduce the U-value to 0.22. Change the 50mm PUR/PIR rigid foam to 65mm.

ROOF - Concrete tiles over rafters with 100mm Rock fibre quilt between joists and 150mm over.

ROOF - Reduce the U-value to 0.14. Change the top layer of 150mm Rock fibre to 200mm.

GLAZING - UPVC double glazed windows using low-e soft glass.

GLAZING - UPVC double glazed windows using low-e soft glass.

HEATING - Gas fired condensing boiler (86% efficiency) with balanced flue supplying both heating and hot water.

HEATING - Gas fired condensing boiler (90% efficiency) with balanced flue supplying both heating and hot water.

or SBEM (non-dwellings) software.

2. DESIGN LIMITS REQUIRED: The thermal performance of the building envelope, the boiler efficiency, hot water and lighting must be within stated limits.

3. LIMIT SOLAR GAINS IN SUMMER: eg. by controlling the size of windows to reduce the need for air conditioning.

4. DEMONSTRATE THAT THE QUALITY OF CONSTRUCTION HAS BEEN ACHIEVED: By adopting Accredited Construction Details which covers thermal bridging etc and in most cases having an air test

Part L1B - Work on Existing Dwellings eg. extensions, refurbishment and material change of use With the 2006 regulations, meeting the required U-value of an element still applies A guide to U-Values to be achieved in existing buildings to meet Part L1B (Dwellings)

carried out.

5. PROVIDE INFORMATION FOR THE BUILDING USER: Supply

U-VALUES TO BE ACHIEVED ELEMENT

In summary for New Build this means: • Part ‘L’ Compliance for new build is no longer met by just achieving specific U-Values • All aspects of the build design are now major factors with more emphasis on quality of build.

• Builders will require early input and greater technical support at design stage.

• There MUST BE significant improvement in U-Values • Excessive air leakage dramatically affects fabric performance.

R-value - is the Thermal Resistance (m2K/W) of a component and is calculated by dividing the thickness expressed in metres, by its thermal conductivity.

U-value - is an expression for the amount of heat that passes through a square metre of building element. The lower the U-value, the lower the heat loss. U-value is calculated as the reciprocal of the sum of the thermal resistance (R-value) of each component including any cavities. i.e.

U-value (W/m2k)

04

=

1 Total sum of R-values

EXISTING ELEMENTS

EXTENSIONS & NEW ELEMENTS

REPLACEMENT ELEMENTS

RENOVATED ELEMENTS

RETAINED ELEMENTS (Upgraded)

THRESHOLD U-VALUE

Wall-Cavity

0.30

0.35

0.35

0.55

0.70

Wall-Other type

0.30

0.35

0.35

0.35

0.70

Floor

0.22

0.25

0.25

0.25

0.70

Roof-Flat

0.20

0.25

0.25

0.25

0.35

0.20 & 0.20 integral

0.20 & 0.25 integral

0.20 & 0.25 integral

0.20 & 0.25 integral

0.35

0.16

0.16

0.16

0.16

0.35

simple operating and maintenance instructions on usage of heating and water systems.

NEW ELEMENTS

Roof-Sloped Roof-Loft (joist)

NEW ELEMENTS - Thermal Bridging & Air Leakage Part L1B requires that the construction be built avoiding any thermal bridging in the insulation layers and that attention be given to reducing air leakage.

RENOVATED ELEMENTS Where more than 25% of the surface area of a thermal element is being renovated, a way of showing compliance to Part L1B is to upgrade the whole of the element to meet the required U-Value.

RETAINED ELEMENTS Retained Elements is either as a result of a material change of use or where an element became a thermal element as part of the thermal envelope, when previously it was not. Where the U-Value of a retained thermal element is worse than the threshold U-Value, the thermal element should be upgraded to achieve the stated U-Value. Variations may apply where the increased insulation may reduce the usable floor area by more than 5%, or where it will create difficulties with adjoining floor heights, or where the weight of the additional insulation might not be supported by the existing structure.

www.championtimber.com

Building Regulations Part L & L1B 2006

Part ‘L1B’ 2006 Examples to meet Part L1B in existing dwellings Loft Conversion in a Pitched Roof

Available from Champion

Pitch of the roof - required to meet a U-Value of 0.20 W/m2K Where existing rafters are 150mm deep • Existing tiles on tile batten on roof felt/membrane over rafters check for damage and make good.

• 100mm Celotex XR3000 fixed between rafters using either Celotex

Code

Description

844ØTR

2400 x 1200 x 40mm Celotex Tuff-R GA3000Z

845ØTR

2400 x 1200 x 50mm Celotex Tuff-R GA3000Z

846ØTR

2400 x 1200 x 60mm Celotex Tuff-R GA3000Z

8475TR

2400 x 1200 x 75mm Celotex Tuff-R GA3000Z

841ØØTR

2400 x 1200 x 100mm Celotex XR3000 Other sizes available - see page 08

Fixing Clips or 25 x 50mm Treated Batten as stops. Important to maintain a 50mm ventilation gap above insulation.

21396748

Celotex Insulation Clip

2Ø193Ø65 75mm S/A Aluminium Foil Tape • Fix 40mm Celotex GA3000Z underneath to rafters. Overlap joints.

Use Foil Tape to cover face joints.

6312SEP

1800 x 900 x 12.5mm S/E Plasterboard

6312DP

1800 x 900 x 12.5mm S/E Vapour Check Plasterboard (both above also in 2400 x 1200mm)

• Fix 12.5mm Plasterboard through Celotex to rafters.

1ØØRB

100mm thick 4.8m x 1200mm (5.76m2) split 3/400mm Rockwool Roll Batt

15ØTP3

150mm thick 3.2m x 1200mm (3.84m2) split 3/400mm Rockwool Roll Batt

1ØØCGLR14 100mm thick 3 Rolls 11.96m x 387mm (13.89m2) Crown Glass Fibre 50mm Air Space between rafters for ventilation

17ØCGCR8 170mm thick 3 Rolls 7.03m x 380mm (8.01m2) Crown Glass Fibre

Fix 12.5mm Plasterboard through Celotex to rafters

255ØSCT

25 x 50mm Sawn Treated Batten

471ØØSC

47 x 100mm Framemate Dry Graded to C16 Softwood Stud

5Ø1ØØCLS 38 x 89mm fin. C16 Softwood Planed 4 Eased Edges CLS Profile Stud 100mm Celotex XR3000 between rafters, fixed using Insulation Clips or fix 25 x 50mm Treated Batten as stops to rafters

40mm Celotex Tuff-R GA3000Z fixed underneath to rafters overlap joints

47mm x 100mm FrameMate as studding at 600mm centres or 38 x 89mm fin. CLS Profile Timber Stud

Use Foil Tape for face joints on 40mm Celotex

Fix 12.5mm Plasterboard through Celotex to stud

Pitched Roof - Cold Roof Construction For extensions, refurbishment or change of use etc, the requirement to meet Part L1B is a U-value of 0.16 W/m2K. One method of achieving this if the loft space is not to be habitable is to lay rolled insulation between and over the joists to a total of 270mm thick.

If 100mm joists - 100mm roll layed between joists, 170mm layed crossways over

Infilled with 75mm Celotex Tuff-R GA3000Z

Ventilated loft space Sarking felt

Eaves ventilator to ensure 25mm air gap

Alternative to illustration above Where existing rafters are 100mm deep - batten out rafters to 150mm deep Or alternatively: • Use 50mm Celotex Tuff-R GA3000Z between rafters instead of 100mm.

FREE Delivery over

Minimise cold bridging

• Use 60mm Celotex Tuff-R GA3000Z fixed underneath rafters instead of 40mm - overlap joints and tape.

Soffit vents Plasterboard

• Fix 25 x 50mm Treated Batten through Celotex to rafters.

• Fix 12.5mm Plasterboard to batten.

Dwarf Wall -

required to meet U-Value of 0.30 W/m2K

• Install timber stud using 38 x 89mm fin. CLS Profile or 47 x 100mm Framemate.

• Infill with 75mm Celotex GA3000Z insulation or similar to achieve required U-Value.

• Finish with 12.5mm Vapour Check Plasterboard.

100mm Roll layed between (100mm) ceiling joists, then 170mm roll layed over cr0ssways

Code

Description

1ØØRB

100mm thick 4.8m x 1200mm (5.76m2) Split 3/400mm Rockwool Roll Batt

15ØTP3

150mm thick 3.2m x 1200mm (3.84m2) Split 3/400mm Rockwool Roll Batt

a wide area.

1ØØCGLR14 100mm thick 3 Rolls 11.96m x 387mm (13.89m2) Crown Glass Fibre 17ØCGCR8

170mm thick 3 Rolls 7.03m x 380mm (8.01m2) Crown Glass Fibre Treated JoistMate for ceiling joists and rafters Fixings Plasterboard

Flat Ceiling - required to meet a U-Value of 0.16 W/m2K • Install 47 x 100mm (or size required) Sawn & Treated Joistmate as ceiling joist.

• Fix 12.5mm Vapour Check Plasterboard to joists.

• Lay 100mm roll insulation in between ceiling joists and 170mm

FREE Delivery over a wide area.

layered over crossways (dependant on joist size).

All illustrations are intended as a guide only. Specifications subject to change.

We have access to technical information if assistance required.

05

Part ‘L1B’ 2006 Examples to meet Part L1B in existing dwellings Flat Roof on an extension - Warm Roof construction The ideal solution here is to fit an all-in-one roofboard such as Kingspan TR31

Refurbishment - upgrading an exterior wall This combination meets 0.35 W/m2K U-value requirement

Thermaroof or Celotex Tempchek TD3000. Both incorporate a 6mm WBP exterior

100mm Rockwool Roll or 100mm Glassfibre

plywood bonded one side to rigid polyisocyanurate foam, faced with low emissivity aluminium foil on the reverse as a vapour check liner. This creates a

Existing exterior wall

'Warm Roof' and avoids the difficulty of providing ventilation through the roof void.

Insulation angle fillet 3 Layer built-up felt roofing utilising 3G felt base layer partially bonded

3G base layer

40mm Vapour Check Thermal Laminate

102mm Brick

50mm Cavity 13mm Plaster

Kingspan Thermaroof TR31 or Celotex Tempchek TD3000

47mm x 100mm FrameMate Timber Stud or 38mm x 89mm CLS Profile Timber Stud at 600mm centres

Available from Champion

12.5mm Vapour Check Plasterboard Joistmate Unventilated cavity (Low emissivity)

Code

Description

1ØØRB

100mm thick 4.8m x 1200mm (5.76m2) Split 3/400mm Rockwool Roll Batt

1ØØCGLR14 100mm thick 3 Rolls 11.96m x 387mm (13.89m2) Crown Glass Fibre 844ØVCTL 2400 x 1200 x 40mm Vapour Check Thermal Laminate

Foil vapour control layer to underside

Vapour proof non-setting gungrade mastic sealant applied continuously to upper surface of all joists /noggins corresponding with board edges to provide continuity of foil vapour control layer

471ØØSC

47 x 100mm Framemate Dry Graded to C16 Softwood Stud

501ØØCLS 38 x 89mm fin. C16 Softwood Planed 4 Eased Edges CLS Profile Stud Fixings

In combination with weathering, joist cavity and 12.5mm Vapour Check

Drywall Screws up to 75mm long

Plasterboard when Refurbishing an existing extension flat roof • 96mm Thermaroof TR31 meets the 0.25 W/m2K U-Value requirement

New and replacement Windows and Doors New and replacement windows and doors are also required to meet Part L and in particular minimum standards of glazing apply. Champion are main stockists of

For flat roofs on a new extension • 115mm Tempchek TD3115 meets the 0.20 W/m2K U-Value requirement

Available from Champion Code

Description

8496CP

2400 x 1200 x 96mm Thermaroof TR31 Roofdeck

84115TR

2400 x 1200 x 115mm Tempchek TD3115 Roofdeck

Premdor Joinery Products. As an aid to meet the regulations, Premdor’s very comprehensive catalogue available from Champion, details alongside the relevant product the U-value achieved.

In summary the regulations state for: Windows Both new and replacement must meet a U-value of 2.00 W/m2K when fully glazed. If glazing is separate, this must be a minimum hard coat Low E double glazing with an emissivity of 0.15 and a 16mm air gap between panes.

To be sure of compliance, it is recommended that ready factory glazed windows are used.

Treated JoistMate roof joists Timber Firrings 5ØAR

50mm Tilting Fillet Joist Hangers

21347764

Buildex RG151 Coated Fixings for 96mm Deckboard

21383045

Buildex RG177 Coated Fixings for 115mm Tempchek

8412DP

2400 x 1200 x 12.5mm Vapour Check Plasterboard

22946782

Non-setting mastic eg Dow Corning 791 Weatherseal Black

Refurbishment - upgrading an exterior wall Exterior walls are required to meet 0.35 W/m2K U-value. This can be achieved on existing older properties by lining the interior of the exterior wall. Illustration above right shows an example of upgrading a typical brick/cavity/brick construction. For other types of exterior wall construction, the thickness and combination of insulation materials used may vary. For further information, we have access to technical advise if required.

06

Doors Wooden and PVC-U doors are required to meet 2.00 U-value. Whilst Aluminium must meet 2.20 U-value.

The same applies to minimum standards of glazing as windows above. For replacement situations, wooden doors only need comply where over 50% of the combined door and door frame area is glazed.

Contact us if assistance is required.

www.championtimber.com

Insulation Products

Insulation Insulation Products ROCKWOOL

ROCKWOOL RWA45 SEMI RIGID SLABS

Manufactured from molten volcanic rock, Rockwool is:

Lightweight semi-rigid slabs, being denser and more thermally efficient, thickness for thickness than the roll material.

• fire resistant • water repellent • chemically inert

• use for thermal insulation of floors, walls and roofs

• rot and vermin proof

• easy to cut with a sharp knife

• lightweight, easy to use and maintenance free

• size makes it ideal for fitting between rafters (at 600mm centres) on a pitched roof

• retains its thickness • ideal for uses requiring thermal insulation and sound absorption • all Rockwool products are CE/CPD compliant as ‘fit for purpose’

Code

Trade Pack

R Value

RWA45

50mm thick, 8 slabs 1000 x 600mm = 4.80m2

1.43

RWA451ØØ

100mm thick, 4 slabs 1000 x 600mm = 2.40m2

2.86

(m2K/W)

ROCKWOOL CAVITY WALL BATTS

ROCKWOOL ROLL

Installed in the cavity during build up of the wall.

Lightweight insulation mats in a roll. Suitable as insulation for:

• completely reliable, maintenance free and cost effective • size designed to correspond to the vertical spacing of the wall tie therefore no additional fixings required

• roof spaces in domestic, commercial and industrial buildings • underfloor Code

• suspended ceilings, also improving acoustic performance

Trade Pack

R Value

5ØCWB

2

50mm thick, 12 Batts 1200 x 455mm = 6.55m

1.35

65CWB

65mm thick, 10 Batts 1200 x 455mm = 5.46m2

1.75

8ØCWB

80mm thick, 8 Batts 1200 x 455mm = 4.36m2

2.22

(m2K/W)

Brick outer layer

Rockwool Cavity Wall Batt

100mm concrete block inner leaf

Code

Trade Pack (perforated for cutting to 400mm)

R Value

1ØØRB

100mm thick, roll 4.8m x 1200mm = 5.76m2

2.27

15ØTP3

150mm thick, roll 3.2m x 1200mm = 3.84m2

3.41

(m2K/W)

13mm plaster or 12.5mm plasterboard on dabs

ROCKWOOL - FLEXI SLAB

GLASS FIBRE INSULATION ROLLS

A semi rigid slab with a unique flexible edge, simply squeeze and fit with

Manufactured from glass fibre bonded with a synthetic resin:

ease, a perfect fit every time.

• classed as non-combustible, achieving Class 1 Surface Spread of Flame

• tight fit - no gaps • excellent thermal and acoustic properties

• rot and vermin proof • lightweight, easy to use and maintenance free

• dimensions to suit timber and metal studding

• ideal for thermal insulation of roofs, walls and suspended floors • because of its fire resistance and sound absorption qualities, used for suspended ceilings and lining internal partitioning

• no sagging or slumping continuous performance

• CE/CPD compliant as ‘fit for purpose’ • ideal for loft conversions, partitioning and party walls • CE/CPD compliant as ‘fit for purpose’

Code

Trade Pack

R Value

5ØRWFS

1200 x 600 x 50mm thick (pack of 12) = 8.64m2

1.32

1ØØRWFS

1200 x 600 x 100mm thick (pack of 6) = 4.32m2

2.63

(m2K/W)

Code

Trade Pack

1ØØCGLR14

100mm thick, 3 rolls 11.96m x 387mm = 13.89m2 2.27

R Value

15ØCGLR9

150mm thick, 3 rolls 8.04m x 387mm = 9.34m2

3.41

17ØCGCR8

170mm thick, 3 rolls 7.03m x 380mm = 8.01m2

3.86

2ØØFG

200mm thick, 3 rolls 5.2m x 386mm = 6.02m2

4.54

(m2K/W)

Insulation Products See over on pages 8 and 9 for more insulation products…

All illustrations are intended as a guide only. Specifications subject to change.

We have access to technical information if assistance required.

07

Insulation Insulation Products SELF ADHESIVE ALUMINIUM FOIL TAPE

CELOTEX tuff-R ZERO GA3000Z, Therma-Break and Extra-R XR3000

For covering butt joints on Celotex, Tri-Iso, Superquilt and Framefoil

A multi-purpose insulation board made up of rigid polyisocyanurate (PIR) modified polyurethane foam blended with hydrocarbon blowing agents yielding a board with zero Ozone Depletion Potential. The foam is faced with reflective foil both sides as a vapour barrier.

• easily cut with a knife or saw • lightweight adding no load to the structure • has nearly twice the thermal efficiency compared to normal insulation, therefore space saving • stable, strong, durable and rot proof • achieves Class 1 Surface Spread of Flame • manufacturing process complies with legislation to reduce Global Warming • CE/CPD compliant as ‘fit for purpose’

Applications include: • loft conversions

Code

Description

2Ø127848

50mm wide x 45m long

2Ø193Ø65

75mm wide x 45m long

2Ø134693

100mm wide x 45m long

CELOTEX INSULATION CLIP Designed for quick installation of Celotex insulation between timber joists or rafters.

Ensures the insulation is held firmly without the need for nails, screws or battens.

Code

Description

21396748

Celotex Insulation Clip

KINGSPAN THERMAPITCH TP10 ZERO OFP

• pitched roof in between and under rafters • lining of timber frame and masonry walls

Rafter level insulation for tiled or slated pitched ‘Warm Roof’ spaces.

Made from high performance CFC/HCFC-free rigid urethane foam, faced both sides with low emissivity composite foil facings

• floor insulation

Thermapitch TP10 zero OFP is: • easily cut with a knife or saw • lightweight adding no load to the structure • highly resistant to the transmission of water vapour

Code

Description

R Value

8412TR

2400 x 1200 x 12mm

0.50

842ØTR

2400 x 1200 x 20mm

0.85

8425TR

2400 x 1200 x 25mm

1.05

843ØTR

2400 x 1200 x 30mm

1.30

8435TR

2400 x 1200 x 35mm

1.50

844ØTR

2400 x 1200 x 40mm

1.70

8445TR

2400 x 1200 x 45mm

1.95

845ØTR

2400 x 1200 x 50mm

2.15

Code

Description

R Value

8455TR

2400 x 1200 x 55mm

2.35

845ØTP1Ø

2400 x 1200 x 50mm

2.15

846ØTR

2400 x 1200 x 60mm

2.60

846ØTP1Ø

2400 x 1200 x 60mm

2.60

8465TR

2400 x 1200 x 65mm

2.80

847ØTP1Ø

2400 x 1200 x 70mm

3.00

847ØTR

2400 x 1200 x 70mm

3.00

849ØTP1Ø

2400 x 1200 x 90mm

3.90

8475TR

2400 x 1200 x 75mm

3.25

841ØØTP1Ø

2400 x 1200 x 100mm

4.30

848ØTR

2400 x 1200 x 80mm

3.45

849ØTR

2400 x 1200 x 90mm

3.90

841ØØTR

2400 x 1200 x 100mm

4.30

8411ØTR

2400 x 1200 x 110mm

4.75

8412ØTR

2400 x 1200 x 120mm

5.20

8413ØTR

2400 x 1200 x 130mm

5.65

8414ØTR

2400 x 1200 x 140mm

6.05

8415ØTR

2400 x 1200 x 150mm

6.50

Therma-Break

(m2K/W)

• stable, strong, durable and rot proof • achieves Class 1 Surface Spread of Flame • manufacturing process complies with legislation to reduce Global Warming • CE/CPD compliant as ‘fit for purpose’

Tuff-R Zero

• ideal for loft conversions

FREE Delivery over a wide area.

XR3000

Celotex and Kingspan thicknesses are nominal.

08

www.championtimber.com

FREE Delivery over a wide area.

(m2K/W)

Insulation Products

Insulation Insulation Products ACTIS TRI-ISO SUPER 10

THINSULEX

Tri-Iso Super 10 is a lightweight multi-composite insulation made up of 19 alternating layers of closed cell foam and reflective films, yet it is only 30mm thick.

Across-rafter multi-foil insulation for new build, extensions, conversion and refurbishment work, etc.

• thermal efficiency equivalent to 210mm thick (U-Value 0.19 W/m2K) mineral wall insulation as independently certified by BM TRADA

Code

Description

30T10

30mm thick 10m x 1.2m Roll (12m2) Thinsulex Insulation

EXPANDED POLYSTYRENE STANDARD GRADE (EPS70)

• ensures the continuous insulation, weather and air-tightness of roofs and ridges

A traditional, cheap and easy to use form of insulation with many applications such as:

• minimises thermal bridging around roof windows

• thermal insulation for floors, internal walls, pitched roofs tank linings etc., also packing materials

• no need for a vapour barrier

• retains its thermal characteristics indefinitely

• space saving element particularly lends itself to loft conversions

• manufactured using environmentally friendly methods - HCFC free

• quick to install using a staple gun

• BBA Certified

• durable and tear resistant yet cuts easily with scissors • no irritant dust or fibres when cutting and installing • CE/CPD compliant as 'fit for purpose' Code

Description

R Value

3ØTIS1Ø1Ø

30mm thick, 1.60m x 6.25m = 10m2 roll

5.25

(m2K/W)

Code

Description

R Value

25POLY

2400 x 1200 x 25mm

0.66

4ØPOLY

2400 x 1200 x 40mm

1.05

5ØPOLY

2400 x 1200 x 50mm

1.31

75POLY

2400 x 1200 x 75mm

1.97

1ØØPOLY

2400 x 1200 x 100mm

2.62

(m2K/W)

SUPERQUILT A thin multi-layer insulation quilt similar to Tri-Iso. Independent tests show Superquilt provides insulation performance equivalent to 270mm thickness of glass wool, yet its only 25mm thick. Used on roofs.

Space saving qualities makes it ideal for loft conversions.

• meets 2006 updated Part L1B UK Building Regulations • for new build and refurbishment • fast and easy to install using a staple gun • lightweight and flexible • durable and tear resistant yet cuts with scissors

Require HIAB delivery to site?

Code

Description

R Value

25SQ1Ø

25mm thick, 1.5m x 10m = 15m2 roll

6.1

(m2K/W)

SUPERQUILT UNDER RAFTER APPLICATION SuperQuilt is fast and simple to install. With great benefits, keeping rafter depths to a minimum, lightweight and high insulation values.

- ring our New Malden Sales Team on 020 8949 1621

Acoustic Insulation Products See pages 11 - 14

All illustrations are intended as a guide only. Specifications subject to change.

We have access to technical information if assistance required.

09

Insulation Insulation Products KINGSPAN THERMAROOF TR31 (or equivalent) FOR ROOFING

CELOTEX TEMPCHEK TD3115 - FOR FLAT ROOFS

A complete flat roof deck with insulation and built in vapour check laid over joists to create a 'Warm Roof' construction.

Thermaroof comprises polyurethane foam, bonded on 1 face with W.B.P 6.5mm plywood. The other face is bonded with aluminium foil vapour check liner, which has a class 1 Surface Spread of Flame Rating (B.S. 476: Pt 7: 1971). Bed joints in non-setting mastic such as Dow Corning 791, to form a vapour barrier.

A combined roof deck an insulation board for flat roofs supported by timber joists such as JoistMate.

Creates a warm roof construction eliminating the need to insulate between the joists. Board comprises of 6mm WBP exterior plywood bonded one side to rigid polyisocyanurate foam, faced with low emissivity aluminium foil on the reverse as a vapour check liner.

• • • •

lightweight - easy to handle quick to lay plywood face suitable for a wide variety of weathering systems avoids the difficulty of providing ventilation through the roof void • CE/CPD compliant as ‘fit for purpose’

• lightweight, easy to handle • the 'all-in-one' roof board that will take 3 layer felt or one layer weatherings • foam is resistant to mould, microbial growth and vermin For flat roofs, in combination with weathering, joist cavity and 12.5mm vapourcheck plasterboard: • 76mm Thermaroof meets the 0.35 W/m2K U-value requirement for pre April 2002 Building Regulations • 96mm Thermaroof meets the 0.25 W/m2K U-value requirement for April 2002 regulations and updated Part L1B April 2006 refurbishment of existing extensions.

Code

Description

847ØCP

2400 x 1200 x 76mm

8496CP

2400 x 1200 x 96mm

For flat roofs, in combination with weathering, 115mm Tempchek, 150mm joist cavity and 12.5mm Vapour Check Plasterboard, achieves a U-value of 0.19 W/m2K, meeting the 0.20 W/m2K requirement for new flat roof extensions set down in Part L1B of the 2006 Building Regulations.

THREE LAYER FELT APPLICATION Perforated first layer is laid loose, second layer is then heat-laid on top, spot bonding the bottom layer. Top layer is also heat-laid using hot Bitumen.

Description

R Value

84115TR

2400 x 1200 x 115mm

4.788

FIXINGS FOR THERMAROOF & TEMPCHEK

Top layer is also heat-laid using hot bitumen

FREE

THERMAROOF laid with ply facing up

12.5mm Vapour Check Plasterboard or other ceiling covering

Delivery over a wide area.

Code

Code

Description

21345562

Buildex RG126 Coated Fixing for 76mm Thermaroof

21347764

Buildex RG151 Coated Fixing for 96mm Thermaroof

21383045

Buildex RG177 Coated Fixing for 115mm Tempchek

Firring Piece Joistmate

FREE

Delivery over a wide area.

10

www.championtimber.com

(m2K/W)

Resistance to the Passage of Sound To combat the problem of noise pollution in buildings, Approved Document Part 'E' of the Building Regulations sets out to introduce more robust building standards to improve soundproofing in both new build and refurbishment projects by

PRE-COMPLETION TESTING (PCT) Building structures are now subject to Pre-Completion Testing. The onus is on the builder to demonstrate the required levels of sound insulation have been achieved. Testing is done under the jurisdiction of the local Building Control department and is a cost to the builder.

• improving acoustics and therefore sound privacy between dwellings • improve the sound reduction of internal walls and floors in a home

If a failure occurs then the construction has to be improved, then re-tested, again at the builders cost.

• improve the sound reduction between rooms and in common areas eg. residential homes, hotels etc.

• to take into consideration low frequency sounds eg TV's, stereos etc. considered to be the main offender in noise pollution complaints

To ensure the building does not fail, particularly with refurbishment or upgrading of an existing building where every building can be unique, attendance to good design, good quality workmanship and attention to detail is critical.

There are two types of sound considered • Airborne Sound, relates to sound made by speech, TV's, stereos etc.

The measurement term used for on-site testing is DnTw or Rw if laboratory tested and is measured in Decibels (dB). The higher the figure, the better the insulation

There are exceptions where PCT is not required, amongst these are • where a building conforms to Robust Standard Detail (RSD) document (see further on for more detail)

• Impact Sound, relates to sounds such as footsteps or heavy objects impacting on the floor. The measurement terms used here is LnTw for on-site testing and Lnw for laboratory. This is also measured in Decibels. However, the lower the figure the better the insulation against impact noise

• internal walls/partitioning within a dwelling ie. a wall between a bedroom or room containing a W.C. or/and other rooms

ROBUST STANDARD DETAIL (RSD) DOCUMENT The House Builders Federation has set up a programme of testing building methods and materials used for walls and floors in new build construction, to meet and exceed the sound requirements of the regulations. As a consequence these methods etc. have subsequently been approved by Building Control and are known as Robust Standard Detail (RSD) constructions.

New build structures that are built to comply with RSD's standards, negate the need for Pre-Completion Testing.

CTR ADJUSTING FACTOR In addition on some building elements, Part E requires a correction factor to be added to the Airborne Sound value, designed to take into account low frequency noises such as from TV's stereos etc. The Ctr factor is set by Building Control and will vary according to the type of building.

TABLE OUTLINING THE REQUIREMENTS TO MEET PART 'E' (correct at time of going to press, please check with Building Control for current) Building Element

Airborne Sound Transmission

Impact Sound Transmission

(minimum values)

(maximum values)

Internal Wall or Partition (Pre-completion testing not required) 40 Rw dB Wall separating one dwelling from another (Pre-completion testing required) New Build

45 DnTw + Ctr dB

Material change of use / refurbishment

43 DnTw + Ctr dB

Separating timber floor (Pre-completion testing required) New Build

45 DnTw + Ctr dB

62 LnTw dB

Material change of use / refurbishment

43 DnTw + Ctr dB

64 LnTw dB

Acoustic Insulation Products ROCKWOOL FLEXI SLAB A semi-rigid slab with a unique flexible edge, simply squeeze and fit with ease, a perfect fit every time • tight fit - no gaps

• 47 x 75mm FrameMate Stud at 600mm centres

• excellent thermal and acoustic properties

• 50mm Flexi-Slab installed between studs

• dimensions to suit timber and metal studding • no sagging or slumping - continuous performance

• fix 12.5mm Soundshield Plasterboard both sides of stud

• ideal for loft conversions, partitioning and party walls • CE/CPD compliant as 'fit for purpose' Code

TIMBER STUD WALL FORMED BY MATERIAL CHANGE OF USE

Description

‘R’ value

50RWFS

2

1200 x 600 x 50mm thick (pack of 12) = 8.64m

1.32

100RWFS

1200 x 600 x 100mm thick (pack of 6) = 4.32m2

2.63

(m2K/W)

Achieves sound reduction of Rw 40dB Part ‘E’ minimum requirement Double layer of 12.5mm Soundshield Plasterboard achieves Rw 46dB

For Soundshield Plasterboard see page 16

All illustrations are intended as a guide only. Specifications subject to change.

We have access to technical information if assistance required.

11

Part ‘E’ Building Regulations

Part ‘E’ Building Regulations

Acoustic Insulation Acoustic Insulation Products As the Correction Factor (Ctr) to meet Part E will vary dependant on the type of building, this will require different solutions re materials and building methods. To show all of these variations is beyond the scope of this brochure and therefore we recommend manufacturers literature (available on request) or their technical departments are consulted.

SoundBreaker Bars

2 Layers Plasterboard

Reduc Isolation Tape Reduc Acoustic Sealant

REDUC ACOUSTIC FLOOR INSULATION

Reduc Strata

A range of floor insulation products designed to meet the needs of Building Regulations 'Part E'

18mm Chipboard

SoundSlab

All Reduc products are CPD compliant as 'fit for purpose'

REDUC MICRO 17 A thin acoustic overlay panel, ideal for first level floors and above.

Substrate layers of moisture resistant fibreboard and MDF top are separated by visco-elastic sound dampening strips, whilst the underside incorporates a resilient layer of acoustic felt, which provides mechanical isolation from the existing floor.

• dampens vibration and reduces airborne sound and impact noise • easy to install either on top of existing wood or chipboard flooring or even concrete floors. Micro 17 is not load bearing

REDUC STRATA 35 EXTRA An even higher performance version of Reduc Strata and as such does not always require the installation of SoundSlab between joists on timber floors to meet Part 'E'.

Structure and thickness of board is the same except dense cement particle board is used instead of chipboard. When installed as illustration below achieves Aiborne Sound of 48dB (DnTw+Ctr) and Impact Sound 57dB (LnTw).

• only 17mm thick therefore minimal height loss • moisture resistant MDF face takes most floor coverings

SoundBreaker Bars

On existing timber floors where requirement is to satisfy Building Regulation Part 'E' as part of an overall upgrade, install SoundSlab insulation between the timber joists. When installed as illustration below achieves Aiborne Sound of 43dB (DnTw+Ctr) and Impact Sound 58dB (LnTw).

2 Layers Plasterboard

Reduc Isolation Tape

Reduc Acoustic Sealant

Reduc Strata Extra SoundBreaker Bars

18mm Chipboard

2 Layers Plasterboard SoundSlab Reduc Isolation Tape Reduc Acoustic Sealant Reduc Micro 17 18mm Chipboard SoundSlab SoundBreaker Bars 2 Layers Plasterboard

REDUC FOUNDATION 35 A high performance structural or overlay acoustic flooring for use on new and existing timber and concrete floors.

The 35mm thick board comprises of two layers of moisture resistant chipboard, separated by visco-elastic sound dampening strips, then an acoustic felt on the underside.

• dampens vibration and reduces airborne sound and impact noise

REDUC STRATA 35

• installed on top of timber joists (maximum 450mm centres) as a structural floor, or can be used as an overlay

Strata is a high performance acoustic overlay (not structural) flooring for new and existing timber and concrete floors.

Top layers of moisture resistant fibreboard and MDF are separated by viscoelastic sound dampening strips, whilst the underside incorporates a resilient layer of acoustic felt, which provides mechanical isolation from the existing floor. This produces a board with an overall thickness of 35mm.

• moisture resistant chipboard surface takes most standard floor coverings When installed as illustration below achieves Aiborne Sound of 47dB (DnTw+Ctr) and Impact Sound 57dB (LnTw).

SoundBreaker Bars

• dampens vibration and reduces airborne sound and impact noise • easy to install either on top of existing wood or chipboard flooring or even concrete floors • top surface takes most standard floor coverings On existing timber floors where requirement is to satisfy Building Regulation Part 'E' as part of an overall upgrade, install SoundSlab insulation between the timber joists. When installed as illustration above right achieves Aiborne Sound of 45dB (DnTw+Ctr) and Impact Sound 57dB (LnTw).

12

www.championtimber.com

2 Layers Plasterboard

Reduc Isolation Tape

Reduc Acoustic Sealant

Reduc Foundation 35 or 39 SoundSlab

Acoustic Insulation Products

Acoustic Insulation Acoustic Insulation Products Code

Description

MONARFLOOR TRI-DECK

4217RM

1175 x 575 x 17mm Micro 17, (pack of 4)

4235RS

1175 x 575 x 35mm Strata 35, sold loose

4235RSE

1175 x 575 x 35mm Strata 35 Extra, sold loose

8135RF

2400 x 600 x 35mm Foundation 35, sold loose

Designed to reduce sound transmission through existing applications.

Installed as a sub-floor directly onto floor joists.

Tri-Deck Consists of 5mm foam rubber bonded to 8mm LRC foam bonded to 22mm P5 V313 MR Chipboard. Overall thickness 35mm.

Reduc Accessories 21329166

1200 x 600 x 100mm SoundSlab, (pack of 6) = 4.32m2

21383182

1200 x 600 x 75mm SoundSlab (pack of 8) = 5.76m2

21397042

1200 x 600 x 50mm SoundSlab (pack of 12) = 8.64m2

21356162

19 x 5mm Micro 17 Isolation Tape, 15m roll

21396274

37 x 5mm Strata Isolation Tape, 15m roll

21353031

37 x 5mm Strata Extra Isolation Tape, 15m roll

21385957

37 x 5mm Foundation Isolation Tape, 15m roll

21345487

Reduc Joint Adhesive, 1 litre bottle

21353444

1200mm wide Reduc Wire Mesh, 50m roll

21353970

Reduc Flexiseal 380ml Tube

When installed as part of a sound reduction system as right, achieves • Airborne Sound (DnTw+Ctr) - 46dB • Impact Sound (LnTw) - 56dB

MONARFLOOR ACOUSTIC STRIP Designed to reduce sound transmission through timber floors in new and refurbishment projects. Fitted onto the top of the floor joist, then 22mm P5 V313 MR Chipboard Flooring glue fixed over.

A range of acoustic floor insulation products to meet the airborne and impact sound requirements of Building Regulations Approved Document Part 'E'.

Consists of 15mm LRAC foam bonded to a securing membrane, reinforced with a plywood backing. Overall thickness 21mm.

Monarfloor uses LRAC reconstituted foam bonded to various sub-strates depending on the requirement. This foam is stable and has a lower natural frequency than other foams for reducing sound. CE/CPD compliant as 'Fit for purpose'

When installed as part of a sound reduction system as right, achieves • Airborne Sound (DnTw+Ctr) - 48dB • Impact Sound (LnTw) - 48dB

MONARFLOOR ACOUSTIC FLOOR INSULATION

Acoustic Strip

Versions available

MONARFLOOR IMPACT MAT MONARFLOOR DECK 9

Used underneath carpet etc on concrete floors to reduce impact sound

Designed to reduce sound transmission through concrete or existing timber floors in situations where a minimum increase in finished floor height is required.

Consists of a 6.5mm thick resilient rubber crumb with a synthetic reinforced top surface.

Achieves 29dB (Lw).

Consists of 8mm LRAC foam bonded to 9mm MR MDF. Overall thickness 17mm.

Code

Description

• Airborne Sound Reduction (DnTw+Ctr) - 48dB • Impact Sound Reduction (LnTw) - 48dB

4217MFAD

1200 x 600 x 17mm Monarfloor Acoustic Deck 9

8226MFAD

2400 x 600 x 26mm Monarfloor Acoustic Deck 18

MONARFLOOR DECK 18

823ØMFAD

2400 x 600 x 30mm Monarfloor Acoustic Deck 22

Designed to reduce sound transmission through existing timber floors in situations where an increase in finished floor height is not critical.

21338649

2400 x 600 x 35mm Monarfloor Tri-Deck

MFAS45

2400 x 21 x 45mm Monarfloor 45 Acoustic Strip

MFAS75

2400 x 21 x 75mm Monarfloor 75 Acoustic Strip

MFIM11

11m x 1.37m x 6.5mm Roll Monarfloor Impact Mat

Deck 18

Consists of 8mm LRAC foam bonded to 18mm P5 V313 MR Chipboard. Overall thickness 26mm.

When installed as part of a sound reduction system as right, achieves: • Airborne Sound (DnTw+Ctr) - 49dB • Impact Sound (LnTw) - 49dB

MONARFLOOR DECK 22 A thicker version of Deck 18 using 22mm thick P5 V313 MR Chipboard instead of 18mm For heavy domestic applications.

When installed as Deck 18 above achieves: • Airborne Sound Reduction (DnTw+Ctr) - 50dB • Impact Sound Reduction (LnTw) - 50dB

MONARFLOOR ACCESSORIES MFFB1Ø

150 x 6mm x 2m Pack Monarfloor Flanking Band

MFFB75

75 x 6mm x 2m Pack Monarfloor Flanking Band

MFA5 Ask MFA1

– 5ltr Monarfloor Adhesive for a Monarfloor leaflet Monarfloor Adhesive – 1ltr

Ask for a Monarfloor leaflet

Insulation Products See over on pages 14 and 15 for more acoustic insulation products…

All illustrations are intended as a guide only. Specifications subject to change.

We have access to technical information if assistance required.

13

Acoustic Insulation Acoustic Insulation Products ACOUSTILAY ACOUSTIC FLOOR INSULATION

Code

Description

Installed like a conventional underlay it provides an easy and convenient method of upgrading existing floors in building conversions required to meet the airborne and impact sound requirements of Building Regulation Approved Document Part 'E'.

4415AU

1200 x 1200 x 15mm Acoustilay 15

448AU

1200 x 1200 x 12mm Acoustilay 8

443AU

1200 x 1200 x 10mm Acoustilay 3

Acoustilay is constructed with a resilient foam core bonded either one or both sides dependant on type, with a flexible attenuating surface layer.

There are three versions:

ACOUSTILAY ACCESSORIES Perimeter Strips - used with carpet gripper and installed around the perimeter nailed to the floor.

Foam Perimeter Sealer - for sealing the gap between a timber/laminate flooring

Acoustilay 15 - used where both airborne and impact noise insulation is required. Flexible layer two sides. Overall 15mm thick.

Acoustilay 8 - impact noise insulation similar to Acoustilay 15, but airborne noise reduction will depend on the existing floor structure. Flexible layer one side. Overall 12mm thick.

Acoustilay 3 - used where only impact insulation is required. Flexible layer one side. Overall 10mm thick.

• improves airborne sound insulation

overlay. Self adhesive, 3mm thick expanding over 24 hours up to a 15mm gap.

Release Tackifier Adhesive - permanently tacky acrylic adhesive for laying Acoustilay to sub-floor and carpet tiles.

Acrylic Adhesive - high tack, good grab, permanent bond. For bonding carpet and timber to Acoustilay.

Acoustilay MDF - special T & G V313 Moisture Resistant MDF used as an interlayer minimising joint movement, carpet rucking etc.

Code

• reduces impact noise • flexible, easily cut and shaped • offers economy of quick and easy installation, simply laid under the carpet • minimum increase in floor level • tested to BS2750 • flame retardant, surface layer self extinguishing • CE/CPD compliant as 'fit for purpose'

Description

12ØØAPS15 25 x 9mm thick Acoustilay 15 Perimeter Strip, 1.2m long 12ØØAPS8

25 x 6mm thick Acoustilay 8 Perimeter Strip, 1.2m long

21351549

15 x 3 to 15mm thick Foam Perimeter Sealer, 8m roll

21357Ø84

Release Tackifier Adhesive, 10ltr

213654Ø9

Acrylic Adhesive, 5ltr

446AUMR

1200 x 1200 x 6mm Acoustilay TG4 MR MDF Acoustic Underlay

ATTENU8 ACOUSTIC UNDERLAY - FOR REFURBISHMENT This underlay is designed to improve the airborne and impact sound insulation of an existing wood or concrete floor and can be laid under carpet or laminate flooring etc.

The high-density sound barrier assists in blocking airborne noise, whilst the foam resilient layer assists in absorbing impact noise. Attenu8 underlay is hardwearing and gives excellent under foot touch. The increase in floor height The Perimeter Strip nailed to the floor, with the foam edge seal compressed to the skirting and gripper nailed on top.

Plywood, MDF or timber laid onto Acoustilay with Perimeter Sealer or flexible mastic to the edge.

is minimal, particularly when substituting for the underlay under an existing carpet.

Existing timber floor, lifted to put in the Rockwool, re laid and all gaps caulked

Carpet or laminated flooring etc.

Attenu8 Underlay

(No guarantees can be given to the acoustic performance of this system as every existing situation varies)

Airborne Sound Insulation of Timber Floors

Impact Sound Insulation of Timber Floors

The Building Regulations require a figure for DnTw + Ctr of 43dB or higher for airborne noise between dwellings within a converted property.

The higher the figure the better the insulation.

The Building Regulations require a figure for LnTw of 64dB or lower for impact noise between dwellings within a converted property. The lower the figure the better the insulation against impact noise.

Code

Description

44A8U15

1200 x 1200 x 13mm Attenu8 Underlay

21371134

75 x 5mm 15m S/A Flanking Strip

Other Attenu8 Acoustic Flooring products for new build as part of a flooring system

LnTW

DnTw

DnTW+ctr

Acoustilay 15

55dB

48dB

Acoustilay 15

37dB

Code

Description

Acoustilay 8

50dB

43dB

Acoustilay 8

39dB

82A8Ø

2400 x 600 x 26mm Attenu8 Overlay - for concrete floors

Acoustilay 3

39dB

5Ø75B7Ø

45 x 70mm fin. 1.8m Attenu8 Timber Batten - for wood and concrete floors

14

www.championtimber.com

Sheet Material Fire Rated, Water & Fire Resistant WBP HARDWOOD PLYWOOD FR EURO CLASS B (Formerly Class O) Code

Description

PYROK 5 STAR, VIROC (Class ‘O’) OR SIMILAR

8412FEPFRO

2440 x 1220 x 12mm

A cement bonded particle board.

• suitable for internal and external use • asbestos free, no hazardous volatiles, non-aggressive dust • cut, plane, drill, router or screw into it

8418FEPFRO

2440 x 1220 x 18mm

Code

Description

846PROC

2440 x 1220 x 6mm

426TB

1218 x 618 x 6mm moisture resistant

HARDIBACKER

MASTERBOARD Consists of a high calcium silicate matrix reinforced with cellulose, which is then high pressure steam cured.

• • • • •

Water and Fire Resistant Sheet Material

Fire Rated, Water & Fire Resistant

Fire Rated Sheet Material

high dimensional and chemical stability, with low alkalinity rated as Class ‘0’ and Class ‘1’ Surface Spread of Flame provides up to 30 min. of fire protection immune to insect and vermin attack smooth 1 face, lightly textured reverse

Made from Portland cement and ground sand with cellulose additives, this board is particularly resistant to water and as such is used in bathrooms, kitchens and utility rooms.

Ideal as a backing board for tiling etc. Generally Hardibacker 250 is used for floor and worktop applications, whilst Hardibacker 500 is used for walls, although the latter can also be used for floors and worktops.

• asbestos free Code

Description

846MB

2440 x 1220 x 6mm

849MB

2440 x 1220 x 9mm

8412MB

2440 x 1220 x 12mm

SUPALUX A high performance building board made from calcium silicate reinforced with selected fibres and fillers.

• rigid, strong yet lightweight • non-combustible, providing up to 4 hours fire protection • moisture tolerant, will not rot or decay • smooth face can be decorated

• • • • •

highly recommended where high levels of moisture exist non-combustible, conforms to Class ‘O’ Surface Spread of Flame vermin and rot proof strong and durable, yet light and easy to work with (wear mask) bonding coat on surface assists tiling

• • • • •

meets ISO 8226 British Board of Agreement (BBA) approved 10 year product warranty asbestos and formaldehyde free suitable for internal and external use

Code

Description

536HB

1500 x 900 x 6mm Hardibacker 250

4312HB

1200 x 800 x 12mm Hardibacker 500

2346Ø973

Alkaline Resistant Joint Tape - 20m roll

• easy to handle and work • asbestos free Code

Description

846SL

2440 x 1220 x 6mm

849SL

2440 x 1220 x 9mm

8412SL

2440 x 1220 x 12mm

MDF FR EURO CLASS C (Formerly Class 1) Code

Description

846MDFFR1

2440 x 1220 x 6mm

849MDFFR1

2440 x 1220 x 9mm

8412MDFFR1

2440 x 1220 x 12mm

8418MDFFR1

2440 x 1220 x 18mm

MDF FR EURO CLASS B (Formerly Class O) Code

Description

8412MDFFRO

2440 x 1220 x 12mm

8418MDFFRO

2440 x 1220 x 18mm

WBP HARDWOOD PLYWOOD FR EURO CLASS C (Formerly Class 1) Code

Description

844FEPFR1

2440 x 1220 x 4mm

846FEPFR1

2440 x 1220 x 6mm

849FEPFR1

2440 x 1220 x 9mm

8412FEPFR1

2440 x 1220 x 12mm

8418FEPFR1

2440 x 1220 x 18mm

All illustrations are intended as a guide only. Specifications subject to change.

We have access to technical information if assistance required.

Superior Water and Mould Resistance Proprietary cement formula with Moldblock™ Protection provides superior mould resistance.

15

Sheet Material Plasterboard & Accessories PLASTERBOARD

SOUNDSHIELD PLASTERBOARD

A wallboard consisting of aerated gypsum encased in a strong durable paper liner.

The high density of this board helps absorb sound energy

• used for partitioning, internal wall and ceiling linings • Ivory face suitable for both plastering and direct decoration • because of its unique behaviour when subject to high temperatures, classified Class ‘O’ Spread of Flame in England and Wales • all Plasterboard products are CE/CPD compliant as ‘fit for purpose’

SQUARE EDGE Code

Description

Weighted Density (Kg/m2)

‘R’ value (m2K/W)

639SEP

1800 x 900 x 9.5mm

6.20

0.06

6312SEP

1800 x 900 x 12.5mm

8.30

0.08

849SEP

2400 x 1200 x 9.5mm

6.20

0.06

8412SEP

2400 x 1200 x 12.5mm

8.30

0.08

8415SEP

2400 x 1200 x 15mm

10.20

0.09

Other sizes available to order.

Tapered edge version, used when ‘Dry Lining’ a wall or partition. Once the correct joint treatment has been completed , provides a flat seamless surface, without the need for plastering.

Description

8412TEP

2400 x 1200 x 12.5 mm

designed for use where sound reduction is particularly important classified as Class ‘0’ Surface Spread of Flame complies with BS1230 Part 1, designated as Type 1 CE/CPD compliant as ‘fit for purpose’

Code

Description

Weighted Density

‘R’ value

(Kg/m2)

(m2K/W)

8413SSPB

2400 x 1200 x 12.5mm Square Edge 11.50

0.05

8415SSPB

2400 x 1200 x 15mm Square Edge

0.06

13.80

PLASTERBOARD ACCESSORIES Code

Description

5Ø12RIS

50 x 12 x 5mm Resilient Isolation Strip Roll

2525STA

25 x 25 x 3.6mm Speedline Steel Angle SL06

3ØSRB

3m Speedline Resilient Bar RB565

IMPORTANT - The ivory face of Plasterboard

TAPERED EDGE

Code

• • • •

Weighted Density

‘R’ value

(Kg/m2)

(m2K/W)

8.30

0.08

Other sizes available to order.

is suitable for direct decoration or plastering.

THERMAL LAMINATE AND VAPOUR CHECK Consists of 12.5mm plasterboard backed with a thick layer of extruded polystyrene, to form a versatile board with high thermal insulation value.

The vapour check version has the added bonus of a water resistant membrane incorporated between the polystyrene and the plasterboard. Cream face is for decorating or plastering.

FOIL BACKED VAPOUR CHECK

• ideal for lining the inside of external walls, particularly when upgrading walls with low insulation value • Vapour Check version important where there is a risk of damp

A tough, scuff resistant metallised polyester film on one face of the plasterboard provides the dual features of vapour check and reflective thermal insulation.

Code

Description

Available in square or tapered edge. Used to line ceilings, external walls and loft conversions etc.

8422TLPB

2400 x 1200 x 22mm Tapered Edge

0.39

Code

‘R’ value

843ØTLPB

2400 x 1200 x 30mm Tapered Edge

0.60

(m2K/W)

843ØVCTL

2400 x 1200 x 30mm Tapered Edge Vapour Check

0.60

2400 x 1200 x 40mm Tapered Edge Vapour Check

0.86

Description

Weighted Density (Kg/m2)

(m2K/W)

639DP

1800 x 900 x 9.5mm Square Edge

6.20

0.06

844ØVCTL

6312DP

1800 x 900 x 12.5mm Square Edge

8.30

0.07

THERMAL LAMINATE PLUS

8412DP

2400 x 1200 x 12.5mm Tapered Edge 8.30

0.07

Other sizes available to order.

‘R’ Value

As Thermal Laminate but 12.5mm plasterboard bonded to CFC-free extruded polystyrene producing a board with lower thermal conductivity.

• allows thinner thicknesses to be used compared to standard

PLASTERBOARD PLANK

• extruded polystyrene provides natural vapour barrier

A thicker version of the standard plasterboard, used for its sound deadening qualities.

Code

Description

‘R’ Value (m2K/W)

Code

Description

8219TEP

16

Weighted Density

‘R’ value

(Kg/m2)

(m2K/W)

2400 x 600 x 19mm Tapered Edge 13.49

0.12

8427TLPPB

2400 x 1200 x 27mm Tapered Edge

8435TLPPB

2400 x 1200 x 35mm Tapered Edge

1.00

844ØTLPPB

2400 x 1200 x 40mm Tapered Edge

1.19

45THBP

2400 x 1200 x 45mm Tapered Edge

1.37

8455TLPPB

2400 x 1200 x 55mm Tapered Edge

1.75

www.championtimber.com

0.71

Sheet Material PHENOLIC LAMINATE WITH VAPOUR CHECK

DRYWALL SCREWS

Uses CFC and HCFC-free phenolic foam bonded to 12.5mm plasterboard

Plated self-tapping screws for fixing plasterboard to either timber or metal stud.

Boxed screws code

incorporating a vapour check.

Code

Description

‘R’ Value (m2K/W)

845ØPLPB

2400 x 1200 x 50mm Tapered Edge

1.82

846ØPLPB

2400 x 1200 x 60mm Tapered Edge

2.36

8465PLPB

2400 x 1200 x 65mm Tapered Edge

2.58

Other sizes available to order.

1000's

2000's

Size

23778948

23729582

3.5 x 25mm

23727557

23764378

3.5 x 32mm

23776173

23745797

3.5 x 38mm

23724785

23737822

3.5 x 42mm

23722Ø19

n/a

3.5 x 45mm

2377Ø621

23769915

3.5 x 50mm

500's

200's

23792852

n/a

3.5 x 55mm

2374Ø792

23721302

3.5 x 60mm

23765Ø85

23725140

4.2 x 65mm

n/a

23784457

4.2 x 75mm

COVE A gypsum core encased in a durable paper liner. Used as a cornice for the angle between walls and ceilings. The face is ready for direct decoration.

Accurate 90˚ mitres can be cut using templates for internal or external corners.

MOISTURE RESISTANT BOARD (MOISTURE SHIELD) Suitable for applications where temporary exposure to moisture may occur.

• suitable for use in bathrooms, kitchens, garages etc • can be used as a baseboard for ceramic tiling Code

8412MRTEP

Description

Weighted Density

‘R’ value

(Kg/m2)

(m2K/W)

10.00

0.05

2400 x 1200 x 12.5mm Tapered Edge

Knauf recommends that Knauf Moistureshield boards should be sealed prior to plastering. (See manufacturers recommendation before plastering).

Offers a greater fire protection than standard Wallboard.

• meets BS1230 Part 1, Type 5

127mm x 3m

COVE ADHESIVE For fixing cove and as a filler for gaps between cove and wall or ceiling, mitres, nail holes etc. One bag is normally sufficient to fix 9 lengths of 90mm or 5 lengths of 127mm cove Code

Description

CA

5kg bags

BONDING COMPOUND

Code

Description

BC

25kg bags

(Kg/m2)

(m2K/W)

Approx. requirement per 100M2 M/F channel 140-190Kg

9.00

0.05

10.7

0.06

8412FCP

2400 x 1200 x 12.5mm Square Edge

8415FCP

2400 x 1200 x 15mm Square Edge

Other sizes, tapered edge and vapour check versions also available.

Prices on application. Other technical details also on application.

JOINT CEMENT The ideal quick drying filler for square edge or tapered edge boards. Can also be used to fill nail or screw holes and any other indents.

Readymix 12 Litre Tub

90mm x 3m

127C

‘R’ value

Description

JC12

100C

Weighted Density

Code

Description

Description

An economical adhesive for fixing metal furring channel when bonding plasterboard together to form laminated partition. Also suitable for all Thermal Board.

FIRECHECK BOARD (FIRESHIELD)

Code

Code

FIBRE JOINTING TAPE (SELF ADHESIVE) Covers over joints between boards and when used with jointing compound, dramatically reducing cracking at joints. Can also be used for internal corners.

Code

Description

FT

Self adhesive 50mm x 90m Roll

PLASTER/PLASTERBOARD BEADS Code

Description

22Ø42941

MMB Plaster Mini-Mesh Bead - 2.4m long

22094339

PAB 24 Plaster Angle Bead - 2.4m long

22045713

PCB 24 Plasterboard Thin Coat Bead - 2.4m long

All illustrations are intended as a guide only. Specifications subject to change.

We have access to technical information if assistance required.

17

Plasterboard & Accessories

Plasterboard & Accessories

Sheet Material Chipboard, OSB, Blockboard & Blanks

Chipboard

Blockboard

STANDARD GRADE TYPE P2

FAR EASTERN/BRAZILIAN 5 PLY

Minimum 600 density interior use only.

• sizes marked 'CE' are CE/CPD compliant as 'fit for purpose' Code

Description

8412C

2440 x 1220 x 12mm 'CE'

8418C

2440 x 1220 x 18mm 'CE'

8425C

2440 x 1220 x 25mm 'CE'

843ØC

2440 x 1220 x 30mm

1Ø418C

3050 x 1220 x 18mm

1Ø425C

3050 x 1220 x 25mm

FLOORING GRADE T&G TYPE P5 MOISTURE RESISTANT (V313) Tongued and grooved all four edges. Minimum 700 .

Moisture resistant for use in areas of high humidity and where risk of moisture. Not for external use.

• ideal for kitchens, bathrooms and extensions • CE/CPD compliant as 'fit for purpose' • FSC min 50%

5 Ply long grain, interior use, face veneers are always hardwood.

• face veneers can be stained, painted or varnished Code

Description

8418RB

2440 x 1220 x 18mm

Door Blanks General construction is of a thick solid timber core with a face veneer flush either side. Veneer is generally suitable for painting. Door blanks for internal use only are generally chipboard core.

• ‘Lite’ door blanks are about 20% lighter than standard • Decorative Veneer versions also available • Blanks can be trimmed to size and glazing apertures added (glazing aperture will have size limitations if used as a fire door) • Used where an oversized door is required, or to fit a non-standard opening Where used as a fire resistant door, generally • 45mm thick blanks achieve 30 minute fire rating • 54mm thick blanks achieve 60 minute fire rating To meet fire rating, whether used full size or trimmed to fit, blanks are required to be lipped both long edges and on 60 minute, short edges as well.

Intumescent Strip/Smoke Seal is also required, either fitted underneath or on the lipping, or to the door frame itself.

Code

Description

8218MRTGC

2400 x 600 x 18mm

‘LITE’ INTERNAL/EXTERNAL (30min)

8222MRTGC

2400 x 600 x 22mm

Code

Oriented Strand Board (OSB) CONDITIONED GRADE OSB3 A general purpose board suitable for exterior use composed of timber wafers/strands of variable species and bonded under pressure with waterproof resin.

Made up in 3 layers, cross oriented to give maximum strength.

• approved by the British Board of Agreement (BBA) • specified for flat roofs,

Description

26FUNSL

1981 x 762 x 45mm

29FUNSL

2058 x 838 x 45mm

3ØFUNSL

2135 x 915 x 45mm

4ØFUXL

2440 x 1220 x 45mm ‘Superlite’

VENEERED INTERNAL (30min) Code 3ØFUNS

Description 2135 x 915 x 45mm Sapele

3ØFUNA

2135 x 915 x 45mm Ash

3ØFUNOQ

2135 x 915 x 45mm Quarter Cut Oak

INTERNAL/EXTERNAL (60min) Code 3ØFUXD

Description 2135 x 915 x 54mm

flooring and wall sheathing • felt manufacturer's guarantee dependent on being BBA approved • cheaper alternative to Ply • CE/CPD compliant as 'fit for purpose' • FSC min 70% Code

Description

84110SB

2440 x 1220 x 11mm

84180SB

2440 x 1220 x 18mm

FREE

Delivery over a wide area.

18

www.championtimber.com

Sheet Material Plywood FLEXIBLE PLYWOOD - MOISTURE RESISTANT GLUING • flexibility allows quick and easy creation of intricate curves and

WBP HARDWOOD PLYWOOD Long grain, hardwood veneers throughout.

• for interior or exterior use • WBP gluing highly resistant to weather, micro-organisms and wet and dry heat • hard wearing and very durable

circular shapes • used in furniture making, exhibition work, shopfitting, columns and framework etc Code

Description

845FPL

2440 x 1220 x 5mm - Long Grain

845FPC

1220 x 2440 x 5mm - Cross Grain

Code

Description

848FPL

2440 x 1220 x 8mm - Long Grain

844WBPP

2440 x 1220 x 3.6mm

848FPC

1220 x 2440 x 8mm - Cross Grain

846WBPP

2440 x 1220 x 5.5mm

849WBPP

2440 x 1220 x 9mm

8412WBPP

2440 x 1220 x 12mm

8415WBPP

2440 x 1220 x 15mm

8418WBPP

2440 x 1220 x 18mm

8425WBPP

2440 x 1220 x 25mm

1Ø54WBPP

3050 x 1525 x 3.6/4mm

1Ø56WBPP

3050 x 1525 x 5.5/6mm

1Ø59WBPP

3050 x 1525 x 9mm

1Ø512WBPP

3050 x 1525 x 12mm

1Ø518WBPP

3050 x 1525 x 18mm

1Ø525WBPP

3050 x 1525 x 25mm

BIRCH WBP Although WBP gluing, Birch ply is made up of veneers which are officially classified as perishable. Not recommended for any exposed exterior application unless pressure preservative impregnated.

Russian/Latvian

For Flexible Veneer - see page 26 BBA APPROVED CONSTRUCTION PLY WBP - CE2+ EN636-2 Metsa Spruce or similar softwood ply construction • British Board of Agrement (BBA) approved for load bearing applications • conforms to EN636-2, for use in roofing, flooring and wall sheathing • CE/CPD compliant as ‘fit for purpose’ • PEFC min 70% Code

Description

849BBA

2440 x 1220 x 9mm

8412BBA

2440 x 1220 x 12mm

8418BBA

2440 x 1220 x 18mm

8424BBA

2440 x 1220 x 24mm

SHUTTERING PLY CE4 EN13986 - WBP GLUE Elliottis Pine or similar softwood ply • general purpose use • not suitable for permanent outdoor applications

Code

Description

55BP

1525 x 1525 x 1.5mm

844BP

1220 x 2440 x 4mm

846BP

1220 x 2440 x 6mm

Code

Description

849BP

1220 x 2440 x 9mm

8418SP

2440 x 1220 x 18mm

8412BP

1220 x 2440 x 12mm

8418BP

1220 x 2440 x 18mm

8424BP

1220 x 2440 x 24mm

Notes on Glue/Bond Types WBP: This Glue/Bond type is highly resistant to weather, micro-organisms, cold and boiling water and wet and dry heat.

The lifespan of these boards are also subject to the durability of species of veneer used, for example, Hardwood Far Eastern Ply will be more durable than Birch Veneered Ply. Exterior: This Glue/Bond type conforms to American and Canadian gradings, glues are classed as being 100% waterproof. Again, the durability of veneer must be taken into consideration, American and Canadian Plywoods are coniferous (softwood) species.

T & G PLYWOOD FLOORING - CE2+ EN636-2 Finnish Spruce, tongued and grooved all 4 edges • internal use, WBP gluing • graded 111/111 both faces • BBA Approved for load bearing • CE/CPD compliant as ‘fit for purpose’ • PEFC min 70% Code

Description

8218TG4P

2400 x 600 x 18mm

MARINE HARDWOOD PLYWOOD WBP glueing, long grain, selected durable hardwood veneers throughout.

• suitable for marine, external and internal uses • conforms to BS1088 Code

Description

844MP

2440 x 1220 x 4mm

846MP

2440 x 1220 x 6mm

849MP

2440 x 1220 x 9mm

8412MP

2440 x 1220 x 12mm

8418MP

2440 x 1220 x 18mm

8425MP

2440 x 1220 x 25mm

All illustrations are intended as a guide only. Specifications subject to change.

We have access to technical information if assistance required.

19

Chipboard, OSB, Blockboard, Blanks & Plywood

Plywood

Sheet Material MDF

MDF Medium Density Fibreboard Manufactured from wood fibres, dry-bonded with synthetic resins then compressed at high frequency.

• uniform, strong, compact and stable • smooth both faces and uniform in thickness • can be cut and profiled, lipping not normally required • can be screwed, glued or dowelled etc • no grain or splintering problems • used heavily in the furniture industry • ideal for making bespoke furniture, doors and units

V313 (Moisture Resistant) MDF For use in areas of high humidity such as kitchens and bathrooms.

Code

Description

846MRMDF

2440 x 1220 x 6mm

849MRMDF

2440 x 1220 x 9mm

8412MRMDF

2440 x 1220 x 12mm

8415MRMDF

2440 x 1220 x 15mm

8418MRMDF

2440 x 1220 x 18mm – Minimum 50% FSC

8425MRMDF

2440 x 1220 x 25mm

8430MRMDF

2440 x 1220 x 30mm

It is recommended that a suitable face mask is worn when cutting or machining, and all faces and edges are sealed with MDF sealer.

10418MRMDF 3050 x 1220 x 18mm

STANDARD For Interior Use Only

A fully exterior MDF, as long as finishing instructions are adhered to

Code

Description

(copies on request).

842MDF

2440 x 1220 x 2/2.5mm

Code

Description

843MDF

2440 x 1220 x 3mm

8412XMDF

2440 x 1220 x 12mm

844MDF

2440 x 1220 x 4mm

8418XMDF

2440 x 1220 x 18mm

846MDF

2440 x 1220 x 6mm – Minimum 50% FSC

8425XMDF

2440 x 1220 x 25mm

849MDF

2440 x 1220 x 9mm – Minimum 50% FSC

8412MDF

2440 x 1220 x 12mm – Minimum 50% FSC

8415MDF

2440 x 1220 x 15mm – Minimum 50% FSC

8418MDF

2440 x 1220 x 18mm – Minimum 50% FSC

8422MDF

2440 x 1220 x 22mm

Code

Description

8425MDF

2440 x 1220 x 25mm – Minimum 50% FSC

8412ZFMDF

2440 x 1220 x 12mm

843ØMDF

2440 x 1220 x 30mm

8418ZFMDF

2440 x 1220 x 18mm

8438MDF

2440 x 1220 x 38mm

BEAD AND BUTT MDF V313 (Moisture Resistant)

8445MDF

2440 x 1220 x 45mm

Grooved at 100mm centres. For covering walls and ceilings etc, and because it’s

8512MDF

2440 x 1525 x 12mm

moisture resistant is particularly suitable

8518MDF

2440 x 1525 x 18mm

in kitchens and bathrooms

1Ø46MDF

3050 x 1220 x 6mm

(not shower or bath area).

1Ø49MDF

3050 x 1220 x 9mm

1Ø412MDF

3050 x 1220 x 12mm

1Ø415MDF

3050 x 1220 x 15mm

1Ø418MDF

3050 x 1220 x 18mm

1Ø425MDF

3050 x 1220 x 25mm

1Ø430MDF

3050 x 1220 x 30mm

1Ø512MDF

3050 x 1525 x 12mm

1Ø518MDF

3050 x 1525 x 18mm

1Ø525MDF

3050 x 1525 x 25mm

MEDEX (EXTERIOR) MDF

ZF ECOLOGIQUE MDF Zero added formaldehyde for use in environmentally sensitive situations such as museums, hospitals, schools etc.

Code

Description

849MRMDFBB

1220 x 2440 x 9mm - cross groove

849MRMDFBBLG

2440 x 1220 x 9mm - long groove

LIGHT MDF A specially engineered MDF ideal where high quality coupled with low weight is required.

• 20% lighter than standard MDF

Bead & Butt MDF

Flexible MDF

FLEXIBLE MDF • create shapes, go round bends, very versatile

Code

Description

843ØLIGHT

2440 x 1220 x 30mm

1Ø418LIGHT

3050 x 1220 x 18mm

• uses include shopfitting, contoured wall features, bar fronts, columns, kitchen, bedroom and office furniture • very cost effective Code

Description

Short Grain (Bend 1220mm Width)

All MDF should be sealed when used in enclosed areas

20

846MDFFS

1220 x 2440 x 6mm

Long Grain (Bend 2440mm Width) 846MDFFL

www.championtimber.com

2440 x 1220 x 6mm

Sheet Material Handi-Panels, Hardboard & Floor Protector

Pre-Cut Handi-Panels CUT TO SIZE WBP HARDWOOD PLYWOOD

PERFORATED/PEGBOARD

Code

Description

Code

Description

2Ø774370

1220* x 610* x 3.6/4mm

84HP

2440 x 1220 x 3.2mm

20777159

2440 x 610 x 3.6/4mm

846HP

2440 x 1220 x 6mm

20734084

1220 x 1220* x 3.6/4mm

2Ø742409

1220* x 610* x 5.5/6mm

IVORY INSULATION BOARD

2Ø796563

2440 x 610* x 5.5/6mm

2Ø753498

1220 x 1220* x 5.5/6mm

Low density fibre board faced one side with cream paper, which can be painted.

Interior use only.

2Ø761813

1220* x 610* x 9mm

Code

Description

2Ø794651

2440 x 610* x 9mm

8412I

2440 x 1220 x 12.7mm

2Ø7729Ø1

1220 x 1220* x 9mm

PINBOARD

2Ø781224

1220* x 610* x 12mm

2Ø735388

2440 x 610* x 12mm

A medium density board (not to be confused with MDF) ideal for notice boards and train set bases.

2Ø792312

1220 x 1220* x 12mm

2Ø743703

1220* x 610* x 18mm

2Ø795085

1220 x 1220* x 18mm

2Ø72234Ø

2440 x 610* x 18mm

Code

Description

849P

2440 x 1220 x 8/9mm

SUNDEALA ‘K’ BOARD

Code

Description

A medium density board (not to be confused with MDF) ideal for notice boards and train set bases.

2Ø734Ø6Ø

1220 x 610* x 6mm

Code

Description

2Ø76588Ø

1220 x 1220* x 6mm

846SUN

2440 x 1220 x 6mm

2Ø738181

2440 x 610* x 6mm

849SUN

2440 x 1220 x 9mm

2Ø72ØØ49

1220 x 610* x 9mm

8412SUN

2440 x 1220 x 12mm

2Ø77143Ø

1220 x 1220* x 9mm

MDF MEDIUM DENSITY FIBREBOARD

2Ø722814

2440 x 610* x 9mm

2Ø7742Ø2

1220 x 610* x 12mm

2Ø776978

1220 x 1220* x 12mm

2Ø725366

2440 x 610* x 12mm

482418MDF

1220 x 610* x 18mm

484818MDF

1220 x 1220* x 18mm

961218MDF

2440 x 305* x 18mm

961818MDF

2440 x 458* x 18mm

962418MDF

2440 x 610* x 18mm

963Ø18MDF

2440 x 762* x 18mm

Dimensions marked * are nominal

Hardboard STANDARD A dense, highly compressed wood fibre sheet material, very smooth on one side with a mesh pattern on the reverse.

Code

Description

84H

2440 x 1220 x 3.2mm

42H

1220 x 610 x 3.2mm

846H

2440 x 1220 x 6.0mm

Floor Protection Board PROTECTOR BOARD A low priced plain black board for protecting floors whilst wet trades etc are on site.

Code

Description

842PBBP

2440 x 1230 x 2mm

Cut to size service As well as ‘off the shelf’ pre-cut handi-panels in plywood and MDF, Champion also offer a cut-to-size service on most sheet material items including worktops.

The first two cuts are FREE per sheet.

Applies to straight vertical and horizontal cuts only.

For bulk or precision cutting – ask for a quote.

OIL TEMPERED • denser and stronger than standard hardboard • greater resistance to moisture • uses include farm buildings, signs, packaging etc Code

Description

84HT

2440 x 1220 x 3.2mm

All illustrations are intended as a guide only. Specifications subject to change.

We have access to technical information if assistance required.

21

MDF, Handi-Panels & Hardboard

With regular holes.

Decorative Sheet Material Screen Panel & Decorative MDF

Screen Panel

VENEERED 2 SIDES - BORDER 2 LONG EDGES, 1 SHORT

Decorative perforated patterns on either hardboard, MDF or Aluminium • Plain can be decorated. White and veneered also available • creates a wide range of design possibilities

Code

Description

23168Ø91

RC431VEPI

1830 x 610mm

Oregon Pine Veneered

ALUMINIUM - BORDER 2 SHORT EDGES Code

Description

23145733

RC247ANGE

1000 x 665mm

Gold Small Clover

23124844

RC227ANGE

1000 x 665mm

Gold Large Clover

HARDBOARD/MDF BORDER ON ALL 4 EDGES

23152571

RC387ANGE

1000 x 665mm

Gold Oriental

Code

Description

2314Ø561

RC227ANSE

1000 x 665mm

Silver Large Clover

231374ØØ

RC403MD

1830 x 610mm

Nevada Plain

23148888

RC387ANSE

1000 x 665mm

Silver Oriental

2314Ø172

RC403HBWH

1830 x 610mm

Nevada White

23198241

RC167ANGE

1000 x 665mm

Gold Maze

23191563

RC263HB

1830 x 610mm

Colorado Plain

231971Ø7

RC183MD

1830 x 610mm

Ohio Plain

ALUMINIUM - NO BORDER

23148499

RC303HB

1830 x 610mm

Dakota Plain

2319988Ø

RC303HBWH

1830 x 610mm

Dakota White

2315126Ø

RC433MD

1830 x 610mm

Oregon Plain

23154Ø49

RC433HBWH

1830 x 610mm

Oregon White

23148215

RC323HB

1830 x 610mm

Filigree Plain

2312Ø129

RC333MD

1830 x 610mm

Fleur De Lys Plain

• use for making dividers, screening, shutters, radiator cabinets and shopfitting etc

Code

Description

23135932

RC127ANGE

1000 x 665mm

Gold Interwoven

23191778

RC127ANSE

1000 x 665mm

Silver Interwoven

Decorative MDF TOPAN COLOURED V313 MDF • solid colour throughout • V313 moisture resistant

FILIGREE PLAIN RC323HB Hardboard

FLEUR DE LYS PLAIN RC333MD MDF

OHIO PLAIN RC183MD MDF

Code

Description

8661ØMDFTBK

2620 x 1830 x 10mm

Black

8661ØMDFTBL

2620 x 1830 x 10mm

Blue

8661ØMDFTG

2620 x 1830 x 10mm

Green

8661ØMDFTR

2620 x 1830 x 10mm

Red

8661ØMDFTY

2620 x 1830 x 10mm

Yellow

86619MDFTBK

2620 x 1830 x 19mm

Black

86619MDFTBL

2620 x 1830 x 19mm

Blue

86619MDFTG

2620 x 1830 x 19mm

Green

86619MDFTR

2620 x 1830 x 19mm

Red

86619MDFTY

2620 x 1830 x 19mm

Yellow

Above subject to availability

COLORADO PLAIN RC263HB Hardboard

OREGON PLAIN RC433MD MDF

NEVADA PLAIN RC403MD MDF

SILVER INTERWOVEN RC127ANSE Aluminium

DAKOTA PLAIN RC303HB Hardboard

BLACK

BLUE

RED

YELLOW

GREEN

GOLD SMALL CLOVER RC247ANGE Aluminium

MELAMINE 2 SIDES Code

Description

8418MFMDFW

2440 x 1220 x 18mm

Matt White

Pre-glued Edging for above 2Ø573Ø1Ø

22mm x 50m Roll

Matt White

LACQUERED 1 SIDES SILVER ORIENTAL RC387ANSE Aluminium

22

GOLD INTERWOVEN RC127ANGE Aluminium NO BORDER

Code

Description

843WLMDF

2440 x 1220 x 3mm

www.championtimber.com

White

Decorative Sheet Material Veneered MDF MAPLE/SYCAMORE VENEERED

Code

Description

Code

Description

846MDFA

2440 x 1220 x 6mm - 1 side

846MDFM

2440 x 1220 x 6mm - 1 side

841ØMDFA

2440 x 1220 x 10mm - 2 sides

841ØMDFM

2440 x 1220 x 10mm - 2 sides

8413MDFA

2440 x 1220 x 13mm - 2 sides

8413MDFM

2440 x 1220 x 13mm - 2 sides

8418MDFA

2440 x 1220 x 19mm - 2 sides

8418MDFM

2440 x 1220 x 19mm - 2 sides

1Ø418MDFA

3050 x 1220 x 19mm - 2 sides

1Ø418MDFM

3050 x 1220 x 19mm - 2 sides

8426MDFA

2440 x 1220 x 26mm - 2 sides

8426MDFM

2440 x 1220 x 26mm - 2 sides

WHITE BEECH VENEERED

CROWN CUT SAPELE VENEERED

Code

Description

Code

Description

846MDFBSS

2440 x 1220 x 6mm - 1 side

846MDFS

2440 x 1220 x 6mm - 1 side

841ØMDFB

2440 x 1220 x 10mm - 2 sides

841ØMDFS

2440 x 1220 x 10mm - 2 sides

8413MDFB

2440 x 1220 x 13mm - 2 sides

8413MDFS

2440 x 1220 x 13mm - 2 sides

8418MDFB

2440 x 1220 x 19mm - 2 sides

8418MDFS

2440 x 1220 x 19mm - 2 sides

8426MDFB

2440 x 1220 x 26mm - 2 sides

1Ø418MDFS

3050 x 1220 x 19mm - 2 sides

STEAMED BEECH VENEERED

8426MDFS

2440 x 1220 x 26mm - 2 sides

Code

Description

TEAK VENEERED

841ØMDFBS

2440 x 1220 x 10mm - 2 sides

Code

Description

8413MDFBS

2440 x 1220 x 13mm - 2 sides

8418MDFT

2440 x 1220 x 19mm - 2 sides

8419MDFBS

2440 x 1220 x 19mm - 2 sides

1Ø419MDFBS

3050 x 1220 x 19mm - 2 sides

8426MDFBS

2440 x 1220 x 26mm - 2 sides

Screen Panel, Decorative & Veneered MDF

ASH VENEERED

CHERRY VENEERED Code

Description

QUARTER CUT WENGE VENEERED

846MDFC

2440 x 1220 x 6mm - 1 side

Code

Description

8410MDFC

2440 x 1220 x 10mm - 2 sides

8419MDFW

2440 x 1220 x 19mm - 2 sides

8413MDFC

2440 x 1220 x 13mm - 2 sides

8418MDFC

2440 x 1220 x 19mm - 2 sides

8426MDFC

2440 x 1220 x 26mm - 2 sides

QUARTER CUT OAK VENEERED Code 844MDFO

Description 2440 x 1220 x 4mm - 1 side

846MDFO

2440 x 1220 x 6mm - 1 side

841ØMDFO

2440 x 1220 x 10mm - 2 sides

8413MDFO

2440 x 1220 x 13mm - 2 sides

8418MDFO

2440 x 1220 x 19mm - 2 sides

1Ø418MDFO

3050 x 1220 x 19mm - 2 sides

8426MDFO

2440 x 1220 x 26mm - 2 sides

CROWN CUT OAK VENEERED Code 846MDFCO 841ØMDFCO

Description 2440 x 1220 x 6mm - 1 side 2440 x 1220 x 10mm - 2 sides

8413MDFCO

2440 x 1220 x 13mm - 2 sides

8418MDFCO

2440 x 1220 x 19mm - 2 sides

8426MDFCO

2440 x 1220 x 26mm - 2 sides

PINE VENEERED Code

Description

846MDFPSS

2440 x 1200 x 6mm - 1 side

841ØMDFP 8413MDFP

2440 x 1220 x 10mm - 2 sides 2440 x 1220 x 13mm - 2 sides

8418MDFP

2440 x 1220 x 19mm - 2 sides

1Ø418MDFP

3050 x 1220 x 19mm - 2 sides

8426MDFP

2440 x 1220 x 26mm - 2 sides

BLACK AMERICAN WALNUT VENEERED Code

Description

846MDFWB

2440 x 1220 x 6mm - 1 side

8413MDFWB

2440 x 1220 x 13mm - 2 sides

8419MDFWB

2440 x 1220 x 19mm - 2 sides

8426MDFWB

2440 x 1220 x 26mm - 2 sides

EDGING – 50m ROLLS – REAL WOOD PRE-GLUED Code

Description

ES19A

19mm/22mm

ES19B

19mm/22mm

Beech

ES19BS

19mm/22mm

Steamed Beech

ES19C

19mm/22mm

Cherry

ES19M

19mm/22mm

Sapele

ES19Ø

19mm/22mm

Oak

ES3ØØ

30mm

White Oak

ES19P

19mm/22mm

Pine

ES19MAP

19mm/22mm

Maple

ES19T

19mm/21mm

Teak

ES19W

19mm/22mm

Walnut

ES19WEN

19mm/22mm

Wenge

Ash

30mm x 50m rolls also available in all the above veneers except Teak and Wenge

All illustrations are intended as a guide only. Specifications subject to change.

We have access to technical information if assistance required.

23

Decorative Sheet Material Wood Veneered & Melamine Faced Chipboard Wood Veneered and Melamine Faced Chipboard Lipped two long edges

WHITE MELAMINE FACED

MAHOGANY MELAMINE FACED

STEAMED BEECH MELAMINE

1830mm length 15-16mm thickness

2440mm length 15-16mm thickness

2440mm length 15-16mm thickness

Chipboard core used is super smooth 3 layer construction of an average 650mm density.

• surface finish ensures no chips are ‘grinning’ through the surface

Description 2440 x 152mm

Code

Description

1830 x 610mm

Code 2Ø54Ø333

2Ø585525

2440 x 152mm

2Ø529062

1830 x 687mm

2Ø588953

2440 x 228mm

2Ø523275

2440 x 228mm

2Ø577681

1830 x 762mm

2Ø537562

2440 x 305mm

2Ø531591

2440 x 305mm

2Ø52629Ø 1830 x 915mm 2440mm length 15-16mm thickness

2Ø586188

2440 x 381mm

2Ø539917

2440 x 381mm

2Ø583408

2440 x 457mm

2Ø596842

2440 x 457mm

2Ø574918

2440 x 152mm

2Ø532Ø24

2440 x 531mm

2Ø556556

2440 x 531mm

2440 x 228mm

2Ø58Ø636

2440 x 610mm

2Ø599218

2440 x 610mm

2Ø520748

2440 x 305mm

BLACK ASH MELAMINE FACED

MAPLE MELAMINE FACED

2Ø569365

2440 x 381mm

2440mm length 15-16mm thickness

2440mm length 15mm thickness

2Ø545260

2440 x 457mm

2Ø566593

2440 x 531mm

2Ø56382Ø

2440 x 610mm

2Ø537036

2440 x 687mm

2Ø561048

2440 x 762mm

2Ø532918

2440 x 915mm

• boards are bonded for life • melamine used is classed as durable • wood veneers used are ‘A’ grade, bonded to both faces As well as this range of standard sizes, we can also have boards made to measure and edged up to all four edges if required. Straight cut shapes are also possible.

We will be pleased to quote you.

Code

Description

2Ø59154Ø

1830 x 152mm

2Ø54Ø166

1830 x 228mm

2Ø588779

1830 x 305mm

2Ø586ØØ3

1830 x 381mm

2Ø534615

1830 x 457mm

2Ø583231

1830 x 531mm

2Ø531843

2Ø572136

MAGNOLIA MELAMINE FACED 2440mm length 15-16mm thickness

Code

Description

2Ø59Ø253

2440 x 152mm

2Ø538866

2440 x 228mm

2Ø536Ø91

2440 x 305mm

2Ø5847Ø2

2440 x 381mm

2Ø58193Ø

2440 x 457mm

2Ø53Ø549

2440 x 531mm

2Ø579159

2440 x 610mm

GREY MELAMINE FACED 2440mm length 15-16mm thickness

\

Code

Description

Code

Description

2Ø565299

2440 x 152mm

2Ø58Ø933

2440 x 152mm

2Ø583378

2440 x 228mm

2Ø52252Ø

2440 x 228mm

2Ø562526

2440 x 305mm

2Ø537Ø67

2440 x 305mm

2Ø559748

2440 x 381mm

2Ø54Ø463

2440 x 381mm

2Ø581831

2440 x 457mm

2Ø53Ø679

2440 x 457mm

2Ø556976

2440 x 531mm

2Ø561178

2440 x 531mm

2Ø581Ø77

2440 x 610mm

2Ø556921

2440 x 610mm

LIGHT OAK MELAMINE FACED

LIMED OAK MELAMINE FACED

2440mm length 15-16mm thickness

2440mm length 15mm thickness

Code

Description

2Ø598518

2440 x 152mm

Code 2Ø5499Ø9

Description 2440 x 152mm

2Ø551421

2440 x 228mm

2Ø545659

2440 x 228mm

2Ø594398

2440 x 305mm

2Ø533Ø9Ø

2440 x 305mm

2Ø54865Ø

2440 x 381mm

2Ø594091

2440 x 381mm

2Ø545888

2440 x 457mm

2Ø52Ø274

2440 x 457mm

2Ø594497

2440 x 531mm

2Ø598167

2440 x 531mm

2440 x 610mm

2Ø534219

2440 x 610mm

2Ø543112

24

Code

Description

2Ø527778

2440 x 152mm

2Ø524999

2440 x 228mm

2Ø573614

2440 x 305mm

2Ø522223

2440 x 381mm

2Ø57Ø835

2440 x 457mm

2Ø523213

2440 x 531mm

2Ø584146

2440 x 610mm

www.championtimber.com

Decorative Sheet Material ANTIQUE PINE MELAMINE FACED

BLEACHED ASH MELAMINE FACED

PINE 2 SIDES

2440mm length 15mm thickness

2440mm length 15mm thickness

WOOD VENEERED BOARD 2440mm length 15-16mm thickness

Code 2Ø584122

Code

Description

2Ø556457

2440 x 152mm

Code

Description 2440 x 152mm

Description 2440 x 152mm

2Ø578213

2440 x 228mm

2Ø532796

2440 x 228mm

2Ø582111

2Ø531263

2440 x 305mm

2Ø564421

2440 x 305mm

2Ø53Ø716

2440 x 228mm

2Ø525569

2440 x 381mm

2Ø549Ø84

2440 x 381mm

2Ø527945

2440 x 305mm

2Ø535339

2440 x 457mm

2Ø527488

2440 x 457mm

2Ø576561

2440 x 381mm

2Ø576929

2440 x 531mm

2440 x 531mm

2Ø52517Ø

2440 x 457mm

2Ø55Ø493

2440 x 610mm

2440 x 610mm

2Ø573799

2440 x 531mm

AFRICAN MAHOGANY

2Ø571Ø16

2440 x 610mm

2 SIDES WOOD VENEERED BOARD

SHEET DECORATIVE CHIPBOARD

2440mm length 15-16mm thickness

UNLIPPED - MELAMINE 2 SIDES

PEARWOOD MELAMINE FACED 2440mm length 15mm thickness

2Ø552442 2Ø52Ø465

Wood Veneered & Melamine Faced Chipboard

Wood Veneered & Melamine Faced Chipboard

8415MFCW 2440 x 1220 x 15mm Matt White

Iron-on Edging Strip

Code

Description

2Ø529611

2440 x 152mm

Code

Description

Code

Description

2Ø554569

2440 x 228mm

2Ø561222

2440 x 152mm

2Ø575267

19mm White Melamine IE811

10m roll

2Ø53Ø9Ø7

2440 x 305mm

2Ø584689

2440 x 228mm

2Ø5211Ø3

19mm Mahogany Melamine IE813

10m roll

2Ø578Ø46

2440 x 381mm

2Ø558451

2440 x 305mm

2Ø538767

19mm Light Oak Melamine

10m roll

2Ø587Ø17

2440 x 457mm

2Ø555672

2440 x 381mm

2Ø595876

19mm Beech Melamine

10m roll

2Ø565497

2440 x 531mm

2Ø576455

2440 x 457mm

2Ø523879

19mm Magnolia Melamine IE815

10m roll

2Ø555696

2440 x 610mm

2Ø5529Ø9

2440 x 531mm

2Ø530082

19mm Maple Melamine

10m roll

STILO WALNUT MELAMINE FACED

2Ø572334

2440 x 610mm

2Ø597511

19mm Pearwood Melamine

10m roll

2440mm length 15mm thickness

2Ø598747

2440 x 687mm

2Ø574451

19mm Stilo Walnut Melamine

10m roll

2Ø547356

2440 x 762mm

2Ø562212

19mm Bleached Ash Melamine

10m roll

2Ø587239

19mm Limed Oak Melamine

10m roll

2Ø533458

19mm Pine Wood Veneer

10m roll

2Ø551797

19mm Oak Wood Veneer

10m roll

2Ø595975 2440 x 915mm OAK 2 SIDES WOOD VENEERED BOARD 2440mm length 15-16mm thickness

Champion stock all the fixings, fittings, finishes and tools to go with timber

Code

Description

2Ø591731

2440 x 152mm

2Ø587598

2440 x 228mm

2Ø547196

2440 x 305mm

2Ø551Ø87

2440 x 381mm

2Ø53Ø2Ø4

2440 x 457mm

Code

Description

2Ø552381

2440 x 531mm

2Ø544584

2440 x 152mm

2440 x 610mm

2Ø541811

2440 x 228mm

2Ø59042Ø

2440 x 305mm

2Ø539Ø3Ø

2440 x 381mm

2Ø587659

2440 x 457mm

2Ø584887

2440 x 531mm

2Ø533496

2440 x 610mm

2Ø5315Ø8

All illustrations are intended as a guide only. Specifications subject to change.

We have access to technical information if assistance required.

25

Decorative Sheet Material Veneer, Pine & Oak Panel

Flexible Veneer FLEXI-VENEER Genuine grade ‘A’ wood veneer bonded to a flexible backing.

• will not crack or split like ordinary veneers • use on flat or curved surfaces • glue to substrate using PVA (preferred) adhesives, although contact adhesives will do • will take light staining or oiling • finishes should be plasticized versions eg.

Rustins Clear Plastic Coating

Solid Pine Panel Edge Laminated Manufactured using Scandinavian Redwood Pine, not the cheaper less attractive spruce. Constructed from narrow widths of kiln dried timber averaging around 12% moisture content, which is then edge-glued

Code

Description

together achieving a very strong

84Ø6FVA

2500 x 1240 x 0.6mm Ash - 1 side

board, in dimensions wider than can

84Ø6FVBS

2500 x 1240 x 0.6mm Steamed Beech - 1 side

be naturally grown.

84Ø6FVBW

2500 x 1240 x 0.6mm White Beech - 1 side

84Ø6FVC

2500 x 1240 x 0.6mm Cherry - 1 side

84Ø6FVM 84Ø6FVOQC 84Ø6FVOCC 84Ø6FVP 84Ø6FVSCC 84Ø6FVSQC 84Ø6FVWAB

• cut it, carve it, shape it… no need for edging strips

2500 x 1240 x 0.6mm Maple - 1 side

• used for making furniture, built-in wardrobes, worktops, shelving, stair treads etc

2500 x 1240 x 0.6mm Oak 1⁄4 Cut - 1 side 2500 x 1240 x 0.6mm Oak Crown Cut - 1 side 2500 x 1240 x 0.6mm Pine - 1 side 2500 x 1240 x 0.6mm Sapele Crown Cut - 1 side 2500 x 1240 x 0.6mm Sapele 1⁄4 Cut - 1 side 2500 x 1240 x 0.6mm Walnut, American Black - 1 side

Guide to Veneers For a guide to the above veneers please refer to page 23…

IMPORTANT To maintain stability we recommend all surfaces and all edges after cutting and shaping are sealed with either the appropriate coats of paint or 2-3 coats of good quality waterproof polyurethane or varnish.

Pine Board is not suitable for exterior use. Do not allow this product to stand in a centrally heated environment without having first sealed and fixed.

17/18mm THICK

Bonded Laminates Wood Veneer Iron-on self-adhesive wood veneers. Unfinished to stain or varnish.

Code

Description

22366Ø78

2440 x 250mm Sapele Type Wood Veneer

22332431

2440 x 250mm Teak Type Wood Veneer

22371621

2440 x 250mm Oak Type Wood Veneer

22362056

Code

Description

41227TLM

1.2m x 300mm

42427TLM

1.2m x 600mm

61227TLM

1.8m x 300mm

62427TLM

1.8m x 600mm

81227TLM

2.4m x 300mm

81627TLM

2.4m x 400mm

82Ø27TLM

2.4m x 500mm

82427TLM

2.4m x 600mm

33mm THICK PINE STRINGER BLANK Code

Description

151133TLM

4.47m x 270mm

28mm THICK PINE STAIR TREAD BULLNOSED Code

Description

91128TLM

2.7m x 270mm

Code

Description

41217TLM

1.2m x 300mm

41617TLM

1.2m x 400mm

42Ø17TLM

1.2m x 500mm

42417TLM

1.2m x 600mm

61217TLM

1.8m x 300mm

61617TLM

1.8m x 400mm

Solid European Oak Panel

62Ø17TLM

1.8m x 500mm

Edge Laminated

62417TLM

1.8m x 600mm

An Oak version of the Pine panel.

8917TLM

2.4m x 225mm

81217TLM

2.4m x 300mm

81617TLM

2.4m x 400mm

82Ø17TLM

2.4m x 500mm

82417TLM

2.4m x 600mm

2440 x 250mm Ash Type Wood Veneer

22368843

27/28mm THICK

• With these panels wide widths of solid Oak are now achievable – stable, economical and a lot less work

2440 x 250mm American Black Walnut Type Wood Veneer • Solid Oak throughout – cut it, carve it, shape it… no need for edging strips

17/18mm THICK

26

www.championtimber.com

Code

Description

52418LOP

1.5m x 600mm

62418LOP

1.8m x 600mm

72418LOP

2.1m x 600mm

82418LOP

2.4m x 600mm

Worktops Postform Laminated & Hardwood Worktops

Postform Worktops

24649384

4200 x 900 x 42mm Iroko

246371Ø7

3050 x 650 x 42mm European Walnut

Postformed Laminated Worktops

24672627

3050 x 900 x 42mm European Walnut

High pressure laminate bonded to a high quality chipboard core.

24621373

3000 x 650 x 40mm Wenge

• meets BS3794

24625982

3000 x 900 x 40mm Wenge

• highly scratch resistant

24635547

4000 x 650 x 40mm Wenge

• alcohol, cosmetic and household chemical resistant

SOLID HARDWOOD - 60mm THICK

• front underside edge sealed to resist water

Code

Description

• out performs cheaper quality worktops

24663366

3000 x 650 x 60mm Prime Beech

• available single postformed edge (1pfe) or 2 edges postformed

2468277Ø

3000 x 900 x 60mm Prime Beech

24627313

3000 x 650 x 60mm European Oak

24643955

3000 x 900 x 60mm European Oak

(2pfe) for breakfast bars etc

40mm THICK Code

Description

24634328

3000 x 600mm Polyrey Odyssey 1pfe Blanc Megeve, White

24670371

3000 x 600mm Polyrey Odyssey 1pfe Lima, Gloss

24668842

3000 x 600mm Warerite Oasis 1pfe Beech Butcher Block

24630078

3000 x 600mm Warerite Oasis 1pfe Jet

Solid Hardwood Tops Manufactured using solid hardwood blocks, finger jointed, then high frequency glued and sanded to give a uniform thickness. We offer a range of oils and finishes suitable for use where food is being prepared.

SOLID HARDWOOD - 26/27mm THICK Code

Description

246712ØØ

3050 x 750 x 26mm Iroko

24635Ø11

3050 x 750 x 26mm European Walnut

24674Ø1Ø

3050 x 750 x 26mm Prime Beech

24648976

3000 x 650 x 27mm Beech A/B Grade

24692274

3000 x 650 x 27mm Oak A/B Grade

MAPLE

EUROPEAN WALNUT

IROKO

PRIME BEECH

OAK

RUSTIC BEECH

Code

Description

246336Ø4

3000 x 650 x 40mm Beech A/B Grade

24693318

3000 x 900 x 40mm Beech A/B Grade

24683173

4000 x 650 x 40mm Beech A/B Grade

24666862

2000 x 1000 x 42mm Beech Butcher Block

2462183Ø

3050 x 650 x 42mm Rustic Beech

246279ØØ

3050 x 900 x 42mm Rustic Beech

24638999

4200 x 650 x 42mm Rustic Beech

24663953

3050 x 650 x 42mm Prime Beech

24666466

3050 x 900 x 42mm Prime Beech

2464Ø299

4200 x 650 x 42mm Prime Beech

24642583

4200 x 900 x 42mm Prime Beech

24661331

3000 x 650 x 40mm Oak A/B Grade

24672429

3000 x 900 x 40mm Oak A/B Grade

2468Ø745

4000 x 650 x 40mm Oak A/B Grade

24676427

3050 x 650 x 42mm Oak

24629379

3050 x 900 x 42mm Oak

24640466

4200 x 650 x 42mm Oak

246253Ø2

3050 x 650 x 42mm Maple

24687782

3050 x 900 x 42mm Maple

2469887Ø

4200 x 650 x 42mm Maple

24642ØØ2

3050 x 650 x 42mm Iroko

2464Ø19Ø

3050 x 900 x 42mm Iroko

All illustrations are intended as a guide only. Specifications subject to change.

We have access to technical information if assistance required.

Veneer, Solid Panel & Worktops

SOLID HARDWOOD - 40/42mm THICK

27

Pick up a brochure at any branch or phone free on:

0800 068 2021 Download a brochure at www.championtimber.com

Champion Timber Branches: NEW MALDEN also HEAD OFFICE

WIMBLEDON

Moorfield Road, Slyfield Industrial Estate, Guildford, GU1 1RU

205 - 209 Burlington Road, New Malden, Surrey, KT3 4NB

2 Hartfield Crescent, entrance off Beulah Road, Wimbledon, SW19 3SD

Tel: 01483 510170

Tel: 020 8949 1621

Tel: 020 8542 1606

Fax: 01483 510171 Email: guildford@championtimber.com Open Mon to Fri 7.30am – 5pm Sat 8am – 5pm

Fax: 020 8942 9752 Email: newmalden@championtimber.com Open Mon to Fri 7am – 5.30pm Sat 8am – 5pm

Fax: 020 8540 7237 Email: wimbledon@championtimber.com Open Mon to Fri 8am – 5.30pm Sat 8am – 5pm

CLAYGATE

DORKING

EDENBRIDGE

High Street, Claygate, Surrey, KT10 0JW

Curtis Road, Dorking, Surrey, RH4 1EJ

Fircroft Way Industrial Estate, Edenbridge, Kent, TN8 6EL

Tel: 01372 462407

Tel: 01306 884418

Tel: 01732 864328

Fax: 01372 468414 Email: claygate@championtimber.com Open Mon to Fri 8am – 5.30pm Sat 8am – 5.30pm

Fax: 01306 889798 Email: dorking@championtimber.com Open Mon to Fri 7am – 5.30pm Sat 8am – 5.30pm

Fax: 01732 863690 Email: edenbridge@championtimber.com Open Mon to Fri 8am – 5pm Sat 8am – 5pm

CHESSINGTON

SUTTON

BROMLEY

385 Leatherhead Road, Chessington, Surrey, KT9 2NQ

272 - 274 High Street, Sutton, Surrey, SM1 1PG

109-123 Southlands Road, Bromley, Kent, BR2 9QX

Tel: 01372 847910

Tel: 020 8642 8291

Tel: 020 8460 6655

Fax: 01372 847911 Email: chessington@championtimber.com Open Mon to Fri 8am – 5.30pm Sat 8am – 5.30pm

Fax: 020 8770 9171 Email: sutton@championtimber.com Open Mon to Fri 7am – 5.30pm Sat 8am – 5.30pm

Fax: 020 8313 0583 Email: bromley@championtimber.com Open Mon to Fri 8am – 5.30pm Sat 8am – 5pm

Delivering over a wide area

March 2008

GUILDFORD