Diggers & Dozers Magazine - Issue 4

DIGGERS & DOZERS ISSUE 4

DESIGNED TO GET MORE DONE • Fuel wise 6 cylinder Cummines Engine • ZF Powershift Transmission with kick-down and F&R • Load sensing hydraulic system for outstanding efficiency

H SERIES WHEEL LOADERS >>>

• Z-Bar for high breakout force and stable payload transport • LCD Display & Rear View for all around vision • Reversible Fan & Automatic Greasing System for maximized uptime

Available at dealer:

TO U GH WO R L D . TO U GH E QU I P M E N T.

www.cpmsales.co.uk info@cpmsales.co.uk Tel: 02392 123392

www.liugong-europe.com info@liugong-europe.com

DIGGERS & DOZERS

Wracked with Indecision Despite the thorough drenching that we and the other attendees of the PlantworX 2017 exhibition received, I left the Bruntingthorpe show ground feeling excited; inspired; optimistic. And yet, almost everything that has happened – politically and financially - since has largely undermined that feeling; turned optimism into studied caution; has switched my half full glass for a half empty one.

Of course, anyone that has been around construction for long enough knows that this business of ours moves in cycles. Downturns are a bit like London buses – Don’t worry if you missed the last one, there’ll be another along in a minute.

This time it feels different. For one thing, no-one has yet uttered the dread word recession, possibly for fear of being premature or – worse – of triggering an industry meltdown. For another, there are pockets of positivity such as HS2.

But the stats speak for themselves. According to market intelligence provider The Builders’ Conference, the UK construction industry has clocked up around 600 new major contract awards with a combined value of around £4 billion each month pretty much since the last recession petered out. In July 2017, that figure had fallen to under £2.5 billion. And, at the time of writing, August looks set to fair no better.

So what to do? We could, of course, batten down the hatches in the hope that any such downturn might not see us. We could bury our heads in the sand and pretend that all in the garden is rosy. Or we can come out fighting.

And Diggers and Dozers has chosen the latter. We have invested in new editorial and advertising staff to make this magazine and the Diggers and Dozers website bigger and better than ever before. We have invested in new camera and audio equipment to make our YouTube channel even better. And we have just published our first book to bring even more value to our readers and subscribers.

So Donald Trump and Kim Jong Un can carry on with their playground spat. Theresa May can continue to preside over a faux government. And our European neighbours can plot their revenge to punish the UK for having the temerity to leave the EU party.

Here at Diggers and Dozers, it’s all guns blazing; and we’ll continue to fire on all cylinders until someone tells us otherwise.

3

EDITORIAL Editor Mark Anthony - Mark Anthony Publicity markanthony@markanthonypublicity.co.uk 07973 456 166 Assistant Editor Fred Anthony - Mark Anthony Publicity anthonyfreddie@googlemail.com 07973 456 166 SALES Sales Director Ben Chambers ben@chambers.media 01903 899942 Business Development Manager Ben Cumberland ben.cumberland@chambers.media 01903 899943 GENERAL ENQUIRIES info@chambers.media 01903 899823 CIRCULATION Mark Anthony - Mark Anthony Publicity markanthony@markanthonypublicity.co.uk 07973 456 166 PRODUCED & PUBLISHED BY Chambers Media Ltd Unit 1, 39 Chatsworth House, Chatsworth Road, Worthing, West Sussex BN11 1LY ben@chambers.media 01903 899823 Diggers & Dozers is published 6 times a year by Chambers Media Ltd. Articles and information contained in this publication are the copyright of Chambers Media Ltd and may not be reproduced in any form without the written permission of the publishers.

The publishers cannot accept responsibility for loss of, or damage to, uncommissioned photographs or manuscripts.

DIGGERS & DOZERS

4

DIGGERS & DOZERS

JCB Brought to Book Diggers and Dozers publishes its firstever book.

Diggers and Dozers is proud to announce that it has published its first-ever book.

Called “Renaissance: Why JCB is the Apple of the Digger World” – the new book explores the striking similarity in the approach to innovation and product development of the two companies; innovation that brought us the iPhone and iPad and the Hydradig and the Teleskid.

The book is written by Diggers and Dozers’ editor Mark Anthony who has been a regular visitor to the JCB World Headquarters for almost 30 years.

“Apple did not invent the smartphone or the tablet computer. But it took those ideas and made them better; made them desirable,” Anthony says. “Having charted the development and launch of machines like the Hydradig, the Teleskid and the Hi Viz dumper, I was struck by JCB’s seemingly unerring knack for

taking a proven machine type and turning that design on its head to create something new and aspirational.”

Although the traditional and formal British values of JCB are seemingly at odds with the less formal American style that permeates through Apple, Anthony says he was struck by the similarities in the approach of both companies.

“I had the idea for this book pretty much immediately after seeing the Hydradig for the first time. Here was an example of JCB taking a largely unloved and underappreciated machine – the wheeled excavator – and making it cool,” Anthony continues. “What was most surprising was that JCB were equally- though privately - aware of the comparisons.”

Anthony explains that – ahead of the writing of the book – he visited the JCB World Headquarters to interview the company’s Chief Innovation and Growth Officer, Tim Burnhope. “I had already started work on the book and even had a front cover design photo on my iPhone,” Anthony recalls. “During our interview, Burnhope repeatedly quoted Apple’s Steve Jobs. I showed him the concept cover photo of a JCB wheel loader taking a bite out of the Apple logo (which we eventually used on the back of the book) and he was astounded.”

5

And these parallels are more than mere coincidence.

During the final stages of research for the book, it transpired that Burnhope had attended Newcastle Polytechnic, the school that spawned Apple’s designerin-chief Jony Ive. “The more I dug, the more the similarities between JCB and Apple emerged,” Anthony continues.

According to Anthony, the new book is the culmination of a near-30-year relationship with the Rocester-based company. “JCB has been an integral part of my professional life for almost three decades. I even travelled to my wedding reception in a JCB 3CX!” he concludes. “I have visited the factory so many times that my car pretty much knows the way, although that didn’t prevent me having a car accident on the way to the factory during the research for this book. As an unbiased journalist with an international readership, I must remain objective. But there’s a little bit of me that really enjoys seeing a British company continuing to put the Great in Great Britain.”

The new book – Renaissance: Why JCB is the Apple of the Digger World is available from Amazon: https://tinyurl. com/y8wbvefg

DIGGERS & DOZERS

OMG! Hyundais for ODG

6

DIGGERS & DOZERS

A host of new Hyundai excavators are helping pave the way for new homes in London with Enfield-based firm ODG Plant.

ODG Plant is the plant-hire arm of multidiscipline construction company Galldris Construction, which is working on the massive redevelopment project, centred around Silvertown on the north bank of the River Thames in East London.

Plans are underway to rejuvenate this once industrial land that overlooks the Thames Barrier. Galldris Construction has taken a slice of the work that aims to create a riverside community near Canary Wharf and London City Airport.

ODG Plant is a longstanding Molson customer – recently updating its fleet with the introduction of several new Hyundai excavators, in a deal brokered by Molson area sales manager Stuart Butler.

The company has taken five Hyundai HX145LCR and five HX220L crawlers, each fully compliant with the latest and future emission requirements as it looks to revamp its existing fleet of machines.

Initially the firm was reluctant to take the machines where AdBlue was a requirement but after reassurance from Butler over the simplicity of its use the ODG team were happy to go with the latest Stage-4 compliant HX series of excavators.

“We like to keep things simple and adding AdBlue is just another thing for our operators to remember.” says Craig Brown, manager at ODG Plant Hire. “… safety and limiting our negative impact on the environment is very important to us as a company and Molson reassured us that the adding of AdBlue really is a very straightforward process.”

One of the reasons the ODG team took the HX145LCR excavators is because of the zero-tail swing they offer.

7

DIGGERS & DOZERS

height is also 9.14m while minimum ground clearance is 480mm.

“The ODG team like the zero tail-swing of the HX145LCR’s. They are compact, powerful excavators. Perfect for the work that Galldris Construction has lined up for them,” says Butler.

“We have a mix of machines,” says Brown.

“It’s because of Molson that we keep going back to Hyundai. The amount of effort the Molson team put in to make the deal work is remarkable. They know what they are talking about, they understand the machines. They help make life easy for us which in turn helps us in our work.”

With an operational weight of 15.16tonnes the HX145LCR is powered by a Perkins 1204F direct injection Tier 4 air cooled engine which delivers a maximum torque of 54Kgf.m at 1400rpm. They have a height of 3.25m, are 2.5m wide with a tail swing radius of 1.5m.

They boast a maximum dig reach with a 1.9m arm of 7.73m, a dig depth of 4.89m and a maximum dig height of 8.84m. Minimum ground clearance is 440mm.

With its extensive plant fleet, ODG plant are looking to the future with a potential move from being an in-house hirer to hiring out to other contractors.

“We have a large fleet that we could hire out to other contractors. We have hundreds of machines. Everything from 23tonne down to 1.5tonne excavators as well as rollers, dumpers and most other pieces of equipment. We have been solely focussed on hiring to Galldris Construction and, although that will remain key, we may be looking at the opportunity to start hiring some of our equipment out to the wider market.”

The HX220L crawler is one of the larger machines on the ODG Plant fleet. With an operating weight of 22.1tonnes it is powered by a Cummins QSB6.7 turbo charged Tier 4 air cooled diesel engine that delivers a maximum torque of 85/7Kgf.m at 1500rpm. It’s 3.2m high with and overall length of 9.53m and 2.99m wide and has a tail swing radius of 2.84m. With the 2m arm its maximum dig reach measures 9.14m with a dig depth of 5.82m. Maximum dig

8

YOU CAN’T SEE EVERYTHING BUT HYUNDAI’S 360° SAFETY SYSTEM CAN

THE NEW HYUNDAI 360° SAFETY FEATURE The new range of Hyundai excavators include an optional new state-of the-art Advanced Around View Monitoring (AAVM) Camera System, which offers the ultimate in safety for operators and site personnel. This unique technology allows the operator to secure a field of vision in all directions around his/her machine and informs you of nearby people or dangerous objects. It makes the new range of Hyundai excavators the safest excavators to operate on any jobsite. This system is exclusive to Hyundai. For more information, please find your nearest Hyundai dealer at www.hyundai.eu

MOVING YOU FURTHER HCE UK | Unit 15 Bilton Industrial Estate | Lovelace Road | RG128YT Berkshire | +44 (0) 1344 484 034 | info.uk@hyundai.eu

www.hyundai.eu

DIGGERS & DOZERS

Liebherr Launches Loader Liebherr is expanding its series of Generation 6 crawler loaders with the addition of the new LR 626 Litronic crawler loader, which is the successor to the LR 624 crawler loader.

It was developed and constructed at Liebherr’s Telfs plant and has an operating weight of between 16,130 and 18,600 kg. The standard bucket has a capacity of 1.8 m³ and its fourcylinder diesel engine produces an output of 105 kW / 143 HP and complies with Tier 4f emission standards.

Liebherr has developed its SCR technology to use an injection of AdBlue® and a diesel oxidation catalyst. A diesel particulate filter is not required.

As a result, the engine operates in a temperature range of maximum efficiency. The constant engine speed, combined with common rail fuel injection, ensures optimised cylinder charging and guarantees lower fuel consumption.

The new LR 626 crawler loader has electronic drive control with integrated ECO function. The selectable ECO mode allows the driver to lower fuel consumption by reducing the engine speed at the push of a button and still maintain high power. In this way, the ECO control ensures more efficient operation with light to moderately heavy use.

Another innovation in all Liebherr Generation 6 crawlers is the proactive power adjustment.

This involves the constant monitoring of the engine and all other machine parameters. When required, such as the deflection of the joystick, the engine power is automatically temporarily increased according to the current requirements.

10

DIGGERS & DOZERS

The driving range preselection integrated in the driving joystick means that three different driving speed ranges can be freely programmed. This enables the LR 626 to be optimally adapted to diverse operational requirements.

The hydrostatic travel drive’s compact components allow for a particularly low centre of gravity. Due to the low engine oil sump on Liebherr’s diesel engine, this is suitable for gradients of up to 45° enabling Liebherr crawler loaders to drive on challenging steep slopes safely and efficiently.

The LR 624’s design, characterised by flowing lines and soft edges, immediately stakes its claim to being at the forefront of innovation in this machine category. The modern overall appearance is carried through into the operator’s cab. The windscreen, made from a single piece of safety glass, follows the driver’s line of vision across the entire arc of the loading bucket and allows for an unobstructed view of the working area and operating equipment. The new machine design also provides perfect panoramic views.

When the running gear was developed in a robust box-type design, special attention was paid to the vibration behaviour and smooth running of the LR 626. This ensures that the bucket’s high fill level can be maintained when transporting material and that the machine is suitable for levelling. The running gear has pendulum suspension and anti-vibration mounting. This compensates for uneven ground and particularly good ground contact can be achieved which, in turn, increases the climbing power and stability on uneven terrain.

The cab with generous dimensions, numerous storage areas, a refrigerated storage compartment and an air conditioning system fitted as standard, rounds off the driving comfort of this new crawler loader. All Generation 6 crawlers have the touch screen display for Liebherr earthmoving machines.

This enables the clear and intuitive setting of key operating parameters.

The ‘turn with opposite chains’ function is automatically implemented by the LR 626 if a sufficiently tight turn has to be made. As a result, the machine achieves outstanding manoeuvrability. This allows the machine to achieve maximum performance, even when cornering, when the bucket is full and when driving over unfavourable ground conditions.

Hawk have taken delivery of a fleet of over 135 new machines including 30 x PC360 Excavators, 25 x HM300-5 Dumptrucks, 33 x Dozers including new to the fleet D37PX-24, the latest intelligent machines and hybrid excavators.

The purchase of this equipment is part of Hawk’s on going renewal process. Purchasing new machines regularly, allows Hawk to offer its customer the most up to date equipment available in the industry.

The business has invested heavily in machinery and equipment in recent years to support strong growth, and has built a reputation for operating a modern and well maintained fleet.

www.hawk-group.co.uk

Tel: 01948 842120

11

This also provides Hawk customers with cutting edge technology, reducing cost and downtime, these machines also produce lower fuel consumption and emissions.

Mike Hawkins, CEO said “By focusing on building and maintaining a modern fleet and offering our customers’ the latest in technology, we have created a solid customer base and opportunities to scale-up even further. This investment is part of an on-going scheme to provide our clients with the best possible equipment available and insure Hawk is one of the leading independent plant hire companies in the UK.”

E: hire@hawk-group.co.uk

DIGGERS & DOZERS

Mighty Mulcher The new, factory-built Cat D3K2 mulcher combines the solid foundation of the Cat D3K2 dozer with the ruggedly designed Cat HM518 mulcher to take on a mix of small to medium diameter material in a wide range of applications, including right-of-way construction / maintenance, site development, tree management, and fire-break clearing.

Available with either a conventional Mighty Mulcher (XL) undercarriage or a low-ground-pressure (LGP) undercarriage, this mulching machine works efficiently in soft underfoot conditions, on slopes, and in rough terrain. For added utility, the mulcher can be removed and an optional Cat VPAT (variable-pitch/angle/tilt) blade installed.

screens and “poly-carb” windows for added protection when mulching. The pressure gauge mounted to the mulcher frame allows the operator to easily monitor mulcher performance and the hydraulically adjustable push guard and hydraulically operated front hood provide an added measure of safety.

An air suspension seat (with seat-mounted controls) reduces operator fatigue and promotes high production.

The width of the HM518 mulcher, featuring an 1822 mm-wide drum, is matched to the operating width of the D3K2 for optimum efficiency and productivity. Finished debris size depends on the type of material being processed and the time allowed for multiple passes.

Caterpillar markets the D3K2 mulcher as a complete model configuration, and the HM518 mulcher cannot be retrofitted to standard D3K2 dozer models. This mulching machine also provides an added choice in combination with the Cat 299D XHP compact track loader.

Operator safety and comfort are priorities in the design of the D3K2 mulcher. The pressurized cab, with 360-degree visibility, is fitted with

12

SKMAssetFinanceLtd FINANCE FOR THE CONSTRUCTION INDUSTRY

20

th

S

SARY R E A N N IV 17 0 2 1 9 97

SPECIALISTS IN ASSET FINANCE FOR PLANT AND VEHICLES, NEW AND USED

M

K

KNOWING YOUR INDUSTRY AND SPEAKING YOUR LANGUAGE

MANUFACTURER AND DEALER SALES AID FINANCE

Finance House, Unit 4, Ringwood Trading Estate, Castleman Way, Ringwood, Hampshire, BH24 3BA

Tel: 01202 855080 Fax: 01202 855487 Email: finance@skmassetfinance.co.uk Web: www.skmassetfinance.co.uk Reg in England No. 3395180. Registered Office: Finance House, 45 Grange Road, St. Leonards, Ringwood, Hampshire, BH24 2QE Authorised and Regulated by the Financial Conduct Authority. VAT Registration Number: 750 3548 40

DIGGERS & DOZERS

Tracking Down new Yanmar Yanmar has updated one of its most popular models, the SV26 excavator in order to make it more productive and user friendly.

The main change is seen in the tracks. As well as having a new design and more grip, they have increased in width from 250mm to 300mm increasing manoeuvrability.

a more impressive machine,” says One customer who runs a number of SV26’s. “Our operators have noticed how work times are decreasing already. Well done Yanmar.”

With 15% less ground pressure, wear will reduce as well as the potential for damages to the ground. The blade has also been widened to accommodate the wider tracks, as well as full ram guard protection on the bucket, dipper and arm cylinders.

Finally SV26 users will now find a reduction in cycle times and an upgrade in comfort due to automatic second speed now being fitted as standard.

This means the speed is automatically determined by the required traction effort.

Although users can still lock the machine in first speed via the switch on the blade lever.

“Not only is tracking and stability better but the SV26 overall looks

14

DIGGERS & DOZERS

Breaking Industry Barriers Breaking industry barriers, the KINSHOFER Group, incorporating Auger Torque, released its most innovative new product ever in 2016 that not only sets it apart from competitors but realised a oneof-a-kind excavator attachment that has pushed the company to new markets and heights.

The NOX-Tiltrotator Series 3 are a first set of industry leading patented products which is compact with a narrow width and reduced height, no protruding parts, ensuring ease of operation and maximum productivity.

Delivered by Northern European experts and led by renowned engineering specialist Juha Strandberg, the product is the first ever in the market to be designed specifically for optimum use: the Kinshofer Nox is compact, both in width and height, and durable. The Nox fits easily to the machine dipper and allows ease of operation in many applications. The whole design is based around efficiency and maximising productivity.

The Tiltrotator is the result of years of research and development, bringing together the long-standing innovation behind KINSHOFER. Headquartered in Helsinki and trials experienced across Europe, the products have been specifically designed and tested in operation, ensuring optimised performance and durability for years to come. The cast body is produced from high strength special alloy ensuring durability in the toughest conditions.

The tilting function is achieved by an elliptic rotary actuator ensuring an extremely compact design with constant tilting force. Coupled with the integrated worm drive, it provides 360deg continuous rotation with low operator maintenance.

The flexible tool is unmatched within its class, consisting of only two greasing points – ease of maintenance - and an integrated hydraulics system within the solid cast housing, therefore offering minimum wear and maintenance. A large variety of attachments that require a low or high oil flow can be used with the Kinshofer Nox. The Tiltrotators and Control Systems consists of a series of five flagship products, all ergonomically exchangeable for specific use through the NOXPROP control system, outperforming products in its class with greater torque and maximised angles.

The Kinshofer Nox is one of the most advanced tools for excavators. It is offered in six variants to suit machines with 3t up to 25t operating weight.

16

For every application Bowman has a solution... ® Heavy duty spinodal bronze bearings

®

Wrapped acetal lined bearings

®

PTFE lined wrapped bearings

™

Bowman Oilless Bearings

oilite

®

BEARINGS

The original self-lubricating sintered bronze bearings

www.bowman.co.uk | info@bowman.co.uk | +44 (0) 1235 462500 | @BowmanInt

®

DIGGERS & DOZERS

• • • • •

TR06NOX Tiltrotators & Control Systems TR10NOX Tiltrotators & Control Systems TR14NOX Tiltrotators & Control Systems TR19NOX Tiltrotators & Control Systems TR25NOX Tiltrotators & Control Systems

The high-tech KINSHOFER NOX-Tiltrotator enhances safety and precision, making it one of the most advanced engineered tools for excavators. The latest version of the Tiltrotators cements the vision of KINSHOFER to lead innovation within the construction sector for the future.

18

MACHINERY OF THE FUTURE

AUTHORIsEd EqUIpMENT >>> Available at dealer: Construction plant and Machinery sales Telephone: 02392 123392 Email: info@cpmsales.co.uk https://twitter.com/LiugongUK https://www.facebook.com/Con-

DIGGERS & DOZERS

Bright Sparkes With its firm focus on supplying customers with the most capable plant machinery, recognised earthmoving contractor Kelston Sparkes Group has announced its recent fleet enhancement of four additional Bell Equipment B50D Articulated Dump Trucks (ADTs), bringing the total number of this model to ten.

Established in Bristol in 1952, Kelston Sparkes has grown to operate one of the largest fleets of ADTs in the UK, and has continually strived to increase the capabilities of its fleet, with the addition of larger excavators, crushers, screens, bulldozers and rollers.

The company now operates a taskforce of over 200 plant and earthmoving vehicles, as part of its ever evolving and expanding fleet. In 2016, the firm decided to bring a model of ADT on board with a greater load volume, to further meet the needs of its clients.

It invested in four Bell B50Ds, which were originally tasked with quarry-based load and haul. These machines demonstrated their versatility and coped well with the long-haul work, proving themselves to have the capacity and fuel efficiency Kelston Sparkes’ clients were looking for.

20

25

YEARS OF RESPRAYS

25 years of Plant & Construction Machinery Resprays

CONTACT US 

Mob: 07977 765 980 Office: 01278 788960

@

Construction.agricultural@btconnect.com



11b Commerce Way, Walrow Industrial Estate, Highbridge, Somerset 2 minutes off Junction 22 on the M5 motorway

Welding/Fabrications/Carbon Fibre & Fibre Glass Repairs & Manufacture.  Shot Blasting/Machine & Company Graphics In-House  4 Bay Modern Workshops  From 08 Tonne Refurbishments to 200 Tonne.

We offer on site service for larger machinery refurbishments (subject to facilities).

Company vans and commercials are also refurbished within our workshops.

We can supply a large national happy customer reference if needed.

30 day payment terms (subject to normal credit check conditions).

DIGGERS & DOZERS

“We required articulated dump trucks for their versatility, but we also needed a much larger load capacity than the current 40-ton dump trucks we operate, due to the longhaul distances coupled with the knowledge that our customers are very fuel focused,” says Director Rob Stark. “We found that Bell’s B50D model could meet both those requirements, delivering a 2:1 heaped capacity of 28 m3, and a rated payload of 45 400 kg; figures that could provide a real payoff for the customer.”

“Our training school launched over 15 years ago, and since then has successfully worked to attract younger drivers to the construction industry, giving them the abilities and confidence they need to achieve a successful career in plant machine operations,” says Stark. “We’ve helped enable operatives to achieve Construction Plant Competence Scheme (CPCS) qualifications, and extend their reach by teaching them how to achieve the best performance from a wide range of earthmoving machines.”

“The B50Ds have been useful machines, with an ideal specification for customers who need a hard-working ADT that offers that extra capacity, without hitting hard on the fuel consumption.” says Stark.

By bringing the total of Bell B50Ds within Kelston Sparkes’ fleet to 10, and training operatives to use the equipment to its best advantage, Stark believes his clients are better equipped with more machines available to meet demand and perform to capacity.

Keen to develop the skill sets and expertise of younger generations of machine operatives, the company launched its own training school back in 2002, a venture which has since grown from strength-to-strength.

“We feel that expanding our fleet with these latest Bell B50Ds furthers the services we can provide our clients and we’ve every confidence that the new models will succeed in delivering the results they need.”

22

DIGGERS & DOZERS

Doosan Double for McCarthy Waste and recycling company McCarthy Marland Limited has purchased two new Doosan DX140LCR-5 Stage IV 15 tonne reduced tail swing crawler excavators and a new Doosan DL250-5 Stage IV wheel loader for the company’s Material Recycling Facility (MRF) in the St Philips area of Bristol in South West England.

24

LEEDS UK

Roall Lane, Kellington, Nr Goole, DN14 0NY

T. +44 1977 662255

Wed 23rd, Thur 24th & Fri 25th August 2017 @ 8:30am

12-13 Hitachi ZX350LC - Choice of 3

2008 CAT 345C

2013 Hitachi ZX225USLC-5B - Choice of 2

2015 Hyundai Robex R145LCR-9A - Choice of 3

2010 Doosan DX160LC

2007 Liebherr A934C

Unused CAT 308E2CR - Choice of 2

2014 Doosan DX85R-3 - Choice of 3

2014 Kubota KX057-4

2014 CAT D6T LGP - Choice of 2

2013 CAT D6N LGP

2008 CAT D6T LGP - Choice of 2

2008 CAT 140M - Choice of 4

2012 Volvo A40F

Unused JCB 436ZX

10-13 JCB 3CX P21 - Choice of 4

12-14 JCB 540-170 - Choice of 19

2011 New Holland L215

2014 Ausa D1000APG

Unused Barford R6536TR

Visit our website for full inventory

www.euroauctions.com If you are interested in selling your Equipment at one of our upcoming auctions please call: David Betts (UK South) +44 7834 600 040 dbetts@euroauctions.com

Gavin Sayles (UK South) +44 7738 457 496 gsayles@euroauctions.com

Chris Osborne (UK) +44 7769 204 732 chris.osborne@euroauctions.com

Chris Rankin (Scotland) +44 7739 641 518 crankin@euroauctions.com

DIGGERS & DOZERS

The new Doosan equipment was purchased from local Authorised Doosan and Bobcat dealer, Kellands (Plant Sales) Ltd of Bridgwater in Somerset. With depots in Bridgwater and Camelford in Cornwall, Kellands (Plant Sales) Ltd is the authorised Doosan and Bobcat dealer for the whole of South West England, covering the counties of Somerset, Dorset, Wiltshire, Devon, Cornwall, North Somerset, Bath and North East Somerset, Bristol and Gloucestershire.

“As part of the latest deal, Mark Payne, Sales Director at Kellands, was able to arrange a very good package including a three year warranty and a three year service contract, giving us complete peace of mind. Using his knowledge of the industry, Mark has also ensured the machines have been set up with the correct specifications for our applications.”

Recycling is an essential part of the business at McCarthy Marland. The company recycles around 95% of waste materials that come into St Philips using state-of-the-art waste segregation technology, which enables it to recover as much recyclable material as possible so that it can go on to be reprocessed and reused.

Formed in 2001, McCarthy Marland was created to fill a gap in the local market for removal of both domestic and commercial waste and the company delivers and collects hundreds of skips of different sizes every day throughout the South West. Over the last 16 years, the company has grown rapidly, taking on extra personnel and increasing its fleet of lorries and skips on a regular basis to satisfy demand.

“We provide our customers with skips or rollon roll-off containers to be filled with waste materials,” says McDonagh. “…more and more of our customers are choosing to separate the waste themselves on site, which makes it easier to handle the recyclable materials when they come to us, so we can recover materials such as wood, soil, ferrous and non-ferrous metals, plastics, cardboard, plasterboard and hardcore.”

“We have been purchasing Doosan machines for over 10 years now and they have always performed well in our busy sorting and loading operations in Bristol and the new Doosan equipment has impressed our operators,” says Kevin McDonagh, Operations Manager at McCarthy Marland.

26

SO LI D TO TH E CO R E Efficient, reliable people and equipment are what keep your business running.

It’s time for reinforcement.

We strengthen the foundation. You reap the rewards. Bring your team to

EXHIBITS: JANUARY 23-26, 2018

the world’s largest annual international event focused on concrete and

SEMINARS: JANUARY 22-26 LAS VEGAS CONVENTION CENTER LAS VEGAS, NV, USA

masonry, and discover what’s new in education and heavy equipment for the market. Leave with the core knowledge and equipment you need to win more jobs and make more money.

REGISTER AT

www.worldofconcrete.com

A selected participant in the International Buyer Program

DIGGERS & DOZERS

Flannery Performs Bypass with Finning

Finning UK & Ireland supports the construction of the Norwich Bypass, one of the UK’s largest road infrastructure projects, with a vast range of Cat machines and advanced Caterpillar Production Management (CPM).

Known as the Northern Distributor Road, the project is being managed by primary contractor Balfour Beatty, with P. Flannery Plant Hire chosen as the main earthworks contractor.

“We have worked with Balfour Beatty on numerous projects over the years, but the significance of the Norwich Bypass is the collaborative approach we have taken with sharing data and information,” says Flannery’s Operations Manager, Niall Hester.

“We worked alongside Finning to show the team at Balfour Beatty just how we can monitor performance on site.

Through VisionLink, we’re able to provide data on payload, fuel burn and overall performance of each core machine on site,” says Hester.

28

DIGGERS & DOZERS

When Flannery were awarded the project, they purchased a wide range of new Caterpillar machines through Finning, ranging from five to 50 tonne excavators and the latest ADT’s, including the Cat 730C Ejector Truck which is fitted with CPM.

This information can be used by Balfour Beatty to provide the best possible carbon footprint on site as well as being able to see the impact of the fleet.

CPM tracks and measures data such as tonnes per load, tonnes per cycle, distance travelled per day, and how many litres of fuel a machine burns per hour which gives the project a daily overview of progression.

The Cat 730C ejector unit creates a safer working environment by displaying payload weight and status including external lights which automatically signal when target payload has been achieved.

“From a performance perspective, we have also witnessed a dramatic increase in cycle times, not to mention the reduction in the use of more-expensiveto-run dozers,” says Hester.

The payload on the machine is shown on the in-cab monitor which enables operators to ensure the truck is not under or over loaded, which in turn optimises fuel burn per tonne on each cycle meaning the productivity of the machines are more efficient.

“Each day we are learning more about the performance of equipment and this information is being shared with Balfour Beatty, so we can all see the benefits of technology driven project management.”

CONCRETE BLOCK MOLDS FORM IT. STACK IT. CHANGE IT.

CONCRETE BLOCK MOLDS 180 x 60 x 60 E 1.275,-

TETRAPODS rates from E 2.325,-

BARRIER E 1.650,-

TRANSPORT ACCESSORIES: L I F T I N G B E A M E 350,- | C L A M P E 1.850,B L O C K - T U R N E R E 3.750,-

all shapes and sizes to be viewed on our website

Head Office Holland | T +31 (0)72 503 93 40 | info@betonblock.com

WWW.BETONBLOCK.COM BB adv 190x133mm EN.indd 1

30

27-02-17 22:28

DIGGERS & DOZERS

Hall Haulers A package of eleven Volvo articulated haulers and a seventy-five tonne EC750E mass excavator have reestablished a long standing relationship between Hall Construction Services Ltd of Rushyford, Co Durham and Volvo Construction Equipment.

The EC750E along with six A40G articulated haulers, have gone to work on a five year overburden removal project to expose seams of high purity gypsum in an open cast mine on the outskirts of Newark in Nottinghamshire, where up to 2.8Mm³ of material is expected to be excavated each year.

has a strong support network throughout the country and this is important to us as we look to undertake nationwide projects such as this one in Newark.”

A further five, slightly larger capacity Volvo A45Gs are on order to supplement the fleet on site which currently totals some twenty-eight items of mobile plant.

The latest G-series haulers from Volvo meet the requirements of Stage IV final emissions legislation being powered by electronically controlled, sixcylinder turbo charged Volvo V-ACT diesel engines.

These feature high torque at low engine speeds, resulting in good fuel efficiency, high performance, quicker engine response and less wear.

“We’ve had many years of experience operating Volvo products in applications ranging from bulk muck shifting to coal extraction particularly in the north east of England and Scotland,” says Managing Director, Stephen Hall. “Volvo

With carrying capacities of 39 and 41 tonnes respectively, the A40G and A45G haulers can attain a maximum speed of 53 kph for fast and productive cycle times. To maximise the volume capability of the trucks due to the friable nature of

32

The new name for quality compact loaders in the UK KNIKMOPS • Versatile, rugged and reliable.

• Tough all steel construction.

• Diesel fuelled Kubota engines from 12hp-50hp.

• Extensive range of attachments available for agriculture, landscaping, construction & forestry.

DIGGERS & DOZERS

the overburden material on the Newark site, Hall Construction has added 300mm side extensions to the truck bodies, increasing the cubic metre capacity to handle five passes from a 5.7m³ bucket.

The new EC750E is a 75-tonne class crawler excavator that offers the perfect combination of power and stability to handle a higher capacity in any application. The EC750E features advanced fuel efficiency technology, ensuring an extremely responsive operation for maximum productivity and profitability. Powered by a Volvo 16-litre Stage IV diesel engine developing 508 nett hp, the EC750E offers innovative electro-hydraulic technology, delivering greater operator control and productivity.

Plant & Liability Insurance From sole machine operators to national plant hirers.

We are an independent specialist broker offering highly competitive premiums for all your insurance needs.

Equipped in mass excavation configuration, the EC750E delivered to Hall Construction sports a 5.7m³ bucket fitted to the end of a 6.6m boom and a 2.9m dipper arm giving generous digging dimensions. For example, the machine’s forward reach measures 11.46 metres with a maximum digging depth of 7.21 metres. The machine’s practical load over height is an impressive 7.0 metres and bucket breakout force 383kN in power max mode.

Tel: 01978 758226 or 07957 403684 34

WEAR TO REPAIR? SPECIALISTS IN:

ON-SITE MACHINING GRAB REFURBISHMENT COMPONENT MANUFACTURE PLANT REFURBISHMENT LINE BORING PLANT REPAIR WELDING FABRICATION

WE REFURBISH:

KING POSTS RAMS & BUCKETS DIPPER ARMS BOOMS EQUALISER BEAMS CENTRE HITCH'S DOG BONES SPROCKETS SIDE ARMS Z BARS QUICK HITCHES

TELEPHONE

01206 272 796 SCHOOL ROA D



L A NGH A M



COLCHES T ER



ESSE X



CO 4 5P B

www.portable-machining.co.uk

DIGGERS & DOZERS

Briggs Cuts JCB Scissor Deal Briggs Equipment – one of the UK’s largest fork lift truck and materials handling providers – has added 10 JCB scissor lifts to its rapidly growing access platform fleet.

The deal, one of the first for the recently launched JCB Access equipment division, includes 5.8m platform height S1930E electric scissors, 8.1m S2632E platforms, the higher lift capacity S2646E model and S3246E scissors, which combine a 10m lift height with a 320kg platform capacity.

The company has invested more than £9.5m in its expanding short term hire fleet this year and will be doubling the number of access platforms available, from 100 to 200 machines throughout 2017.

JCB has been developing and engineering a line-up of powered access machines in secret for the past two years. By the end of 2017 the newlylaunched JCB Access business will be offering a total of 27 new platforms.

“From building contractors and heating engineers to commercial window cleaners and security installers, more and more businesses are engaged in day to day tasks that involve working at height,” says Briggs Equipment’s National Rental Manager, Allan Parsons.

“JCB has a deserved reputation for wellengineered products that are built to cope with the toughest challenges, so we had no hesitation in adding its new electric scissor lifts to our equipment fleet.”

37

Cannock-based Briggs Equipment has been a long-standing customer of local dealer Gunn JCB and the company currently runs more than 80 JCB machines on its fleet. This includes industrial Teletruk forklifts, rough terrain fork lifts, Loadall telescopic handlers and now aerial work platforms. These machines are available on a national basis through Briggs’ network of seven depots.

JCB’s move into the powered access market is designed to grab a slice of a market where 130,000 units a year are sold – generating an annual revenue of $8 billion. Powered access platforms are a common sight around the world where temporary access is needed for people to work at height, particularly on construction sites. The new JCB Access products – designed in-house to meet the needs of rental companies and contractors worldwide – will initially be offered in the UK, France, Germany and North America.

By the end of 2017 JCB’s range of access platforms will include nine electric and three diesel scissor lifts from which can lift to 45 feet, five articulating booms which can go to a height of 81 feet and 10 diesel telescopic booms which can go to 136 feet.

DIGGERS & DOZERS

Kubota Blasts Into Rocket

38

DIGGERS & DOZERS

Rocket Rentals has agreed a deal with Chepstow Construction Equipment, a reputable dealer and supplier of Kubota equipment, for the addition of 29 new excavators, to bring its Kubota fleet to over 70 machines.

Rocket Rentals is a family run business that offers plant hire in Gloucester, Gloucestershire, Somerset and Wiltshire, with a focus on buying machines that provide safety, security and ease of operation. The recent deal will see CCE supply Rocket Rentals with numerous models from 2.5 to 8 tonne including U27-4, U55-4, KX057-4 and KX0804a.

“We’ve got a very strong working relationship with Kubota and Rocket Rentals, so it was great to oversee the new deal which bolsters the company’s Kubota fleet to over 70 machines,” says Ian Whiting from Chepstow Construction Equipment.

“The performance of the KX and U excavators are second to none and will no doubt add value to the success of the plant hire company.”

“The decision to purchase additional Kubota equipment was a result of experiencing an increase in demand for the hire of the excavators,” says Simon Tomblin, Managing Director at Rocket Rentals. “Our aim is to provide our customers with the best machinery possible in the construction industry and we feel confident that the reliability and performance of the Kubota’s allows us to continue offering this service.”

39

DIGGERS & DOZERS

UK Construction week Plant & Machinery Live will return to UK Construction Week at the Birmingham NEC from 10-12 October 2017.

In a dedicated area at The Build Show, Plant & Machinery Live will provide exhibitors with the opportunity to showcase their equipment to visitors as well as perform live demonstrations.

The whole area will be interactive, accessible from The Build Show, with its own dedicated entrance.

The Build Show forms the largest show as part of UK Construction Week and is the industry’s leading event dedicated to the construction sector. Over the past three years, it has established itself as the voice of the industry by showcasing the latest products and solutions that support the sector. Free to attend, the show will attract more than 35,000 visitors over a three day period and feature a diverse range of exhibitors showcasing thousands of products.

Exhibitors will benefit from interaction with the entire spectrum of the industry, from builders, architects, innovators and consultants, so they can network alongside decision makers and purchasers while showcasing their services and products to thousands of visitors. Exhibitors already committed to the show include CAT, Case Construction, Portakabin Group, Randek, and Festool.

A new and improved layout for 2017 will feature additional zones and theatres, including Health and Safety, Windows & Doors, Roofing & Insulation, Tools, , as well as the Builders Merchants Federation Pavilion, Offsite Theatre in association with the Modular and Portable Building Association, and the BIM Prospects Theatre delivered by BRE. At the show, a ‘How to Theatre’ sponsored by providers of surface, personal and jobsite protection products, Trimaco, will feature product demonstrations and advice for SMEs,

while an Education Hub will offer CPDs in partnership with BSI so attendees can benefit from learning new skills during the show. In light of recent tragic events, The Build Show will also have a dedicated hub to provide free education, guidance and advice on building safety and quality.

One of UK Construction Week’s main aims is to act as a showcase for innovation in the industry, whether it’s new ways of working, sustainable products or evolving technologies. The Innovation Trail will bring visitors the latest products, services and innovations that are changing the way we build and have never previously been showcased in the UK. Companies can apply for their product to feature on the Innovation Trail by visiting the website.

A number of new, specialist awards will also feature at this year’s event. These include: Low Carbon Vehicles Awards, BIM Awards, Offsite Awards and the WAN Transport, Concrete in Architecture and Adaptive Reuse Awards. The UK’s best companies in the industry will also be recognised at the Construction Enquirer Awards on the opening night of the show.

Running into the evening, entertainment will include a casino night at the Genting International Casino with exclusive discounts for exhibitors and visitors, a dodgeball tournament and the return of the popular beer and ale festival.

As one of the leading voices of the construction industry, UK Construction Week 2017 will deliver its most comprehensive and diverse show to date with support from leading associations including The Chartered Institute of Building (CIOB), Royal Institute of British Architects (RIBA), Construction Products Association (CPA) and Builders Merchants Federation (BMF).

For more information and free registration visit www. ukconstructionweek.com.

40

2017 10–12 OCTOBER

BIRMINGHAM 10-12 OCTOBERNEC | NEC | BIRMINGHAM

FREE TO ATTEND

THE UK’S LARGEST BUILT ENVIRONMENT EVENT

- 9 SHOWS UNDER 1 ROOF

- OVER 30,000 VISITORS

- 650+ EXHIBITING COMPANIES

- DEDICATED OFFSITE ZONE

- 10,000+ INNOVATIVE PRODUCTS AND SERVICES

- 100+ CPD SESSIONS AND SEMINARS

GET YOUR FREE TICKET NOW

UKCONSTRUCTIONWEEK.COM Includes access to these events:

2017

DEDICATED ZONE FOR

DIGGERS & DOZERS

Hanson Feels XPower Launched at bauma 2016, the XPower range of loaders employs Liebherr’s version of the Continuously Variable Transmission (CVT) to provide a fuel efficient and durable driveline alternative to traditional mechanical driveline systems. The system combines a split driveline that is both mechanical and hydrostatic. The hydrostatic drive is most efficient in short loading cycles whilst the mechanical drive is used for long distance driving or climbing gradients. The transmission automatically manages the interaction between the two drive types and is adjustable and continually mixing the ratio of the two drives without interrupting traction. The hydrostatic portion of the drive is higher when starting the loader and during loading duties. The mechanical element is greater at higher travel speeds.

with a six-cylinder Liebherr engine, which delivers 354 HP at a maximum of 1800 RPM with maximum torque coming at a mere 1300 RPM. Unlike many designs of wheeled loaders, the Liebherr range does away with a large counterweight instead relying on the positioning of the engine to balance the machine. This has allowed Liebherr engineers to streamline the rear canopy and allows for simple and easy access to all major components. The large and hydraulically opening bonnet also doubles up as a sturdy working platform when accessing the engine compartment. The repositioning of the engine and lack of a large transmission has allowed the cooling pack to be moved to a location in front of the engine and away from potential sources of contamination.

The combination of CVT transmission and Liebherr Power Efficiency (LPE) software allow for potential fuel savings of 30% over comparative models. The LPE software continuously monitors the engine, transmission and hydraulic system, as well as driver input, to ensure the loader is constantly running at optimal performance.

Access to the redesigned Liebherr cab is via an angled ladder underneath the nearside of the cab. The redesigned structure gives far greater forward vision thanks to the new windscreen which incorporates fully glazed lower corners.

The adjustable steering column allows the operator to position the wheel to their exact liking and this, coupled with the fully adjustable seat and joystick pod, can accommodate whatever configuration suits the individual

The XPower range has also benefitted from the introduction of new Tier 4 Final emissions compliant engines with the L 586 being fitted

42

DIGGERS & DOZERS

One of the UK’s largest producers of construction materials Hanson Aggregates has purchased the first two Liebherr L 586 XPower wheeled loaders in the country and has put them to work on the aggregate production side of its quarry. driver. Whilst the Hanson machines are equipped with a steering wheel, Liebherr also offers a proportional joystick steering option.

“It is a lovely machine to drive and much more comfortable than any other machine I’ve driven,” says Richie Shawcross , regular operator of one of the L 586 XPower loaders.

“The controls are smooth and there is plenty of power at all times. The touch screen allows me to do my daily fluid checks without having to lift the bonnet.”

“The new Liebherr’s have plenty of clearance over the skip,” says Aggregate Production Manager Phil Davies. The Liebherr’s ability to load the 65 tonne capacity quarry truck in six passes before turning its attention to loading a 44 tonne gross artic showed the versatility of the long arm configuration.

Both machines carry identical capacity buckets of 5.5m3. One has been equipped with teeth for face loading while the second is a general purpose unit for re-handling of the finished product. In a bid to up productivity on the site, both machines have been supplied with the latest in digital weigh loader technology in the shape of RDS’ Loadmaster Alpha 50 system.

Liebherr’s full colour touch screen has been fitted to a sliding rail that allows the operator to position the unit wherever they want on the cab pillar. The screen shows all machine functions, gives an intuitive route for the operator to tailor the machine’s operation and relays the image from the bonnet-mounted rear-view camera.

Loading from a compacted stockpile of blasted material, the hydrostatic transmission on the L 586 XPower came into play distributing power equally to all four wheels, which have Michelin XLD tyres. With no wheel spin or bellowing engine sound, the loader eased into the pile and reversed out with a full bucket every time.

“The touch screen allows me to do my daily fluid checks without having to lift the bonnet,” says Shawcross.

The two wheeled loaders have been specified with longer loader arms and give approximately 450 mm more reach and lift height over the standard versions. The higher lift arrangement has been chosen as the machines will occasionally need to load one of the site’s fleet of 65 tonne capacity dump trucks.

“We have seen an increase in performance and a marked decrease in the amount of fuel we use,” says Davies. “Both machines are now moving in excess of 1800 tonnes of material per shift and this means our product costs less per tonne to produce now, which can only be a good thing.

43

DIGGERS & DOZERS

Doosan Adds ADT Features Doosan Bobcat EMEA has announced a wide array of new standard and optional features for the company’s articulated dump truck (ADT) range.

The first of the new standard features, applied to all ADTs manufactured after 1st January 2017 is an angle limitation system to prevent the truck body from tipping over when it is being loaded with materials. This is also available if requested by customers as a software update for all ‘-5’ machines produced before 2017.

safety and efficiency as the operator always knows the machine will be in a stable position.

Another new standard feature of the ADT range is the engine auto shut down function. ADTs can spend between 30% and 60% of their time standing with the engine idling while they are waiting to be loaded with consequent losses in terms of fuel, warranty and service costs. In order to reduce these costs, Doosan has introduced the auto shut down function which can be switched on and off by the operator on the display. Using the system, the operator can set a time after which the engine will automatically shut down if the computer does not detect any activity in the machine. This function is incorporated in all new Doosan ADTs and is available upon customers’ requests as a software update for machines produced before 1st January 2017.

In the new angle limitation function, a tip limit point can be set to meet the requirements of the machine owner. This allows the body to tip in accordance with the slope of the ground as set by the system. Based on a study of the customer’s application, Doosan can provide recommended limits for the company’s trucks, but it is up to the owner to decide which limits they want to use. If the slope is over the limit, the angle limitation system ensures the body does not move. The function therefore offers increased

44

+44 (0)1473 612761

NATIONWIDE HIRE TRUCKS R US is a family run business in the heart of Suffolk with the passion for customer service. Boas�ng a fleet of the most modern, environmentally friendly heavy plant and machinery in the country today. With our focus on customer needs and sa�sfac�on we offer na�onwide delivery with support from our supplying manufacturers for all machines, whether for earth moving or demoli�on projects.

Our fleet includes CAT D6 dozers, various excavators and Volvo A30 G ar�culated dump trucks. Our A30 G’s are complete with tailgates, auto-lube, inclinometers, floata�on tyres, safety camera’s and air-con for operator comfort. Our Volvo EC380 EL excavators make any muck shi�ing project light work and for clearance jobs we offer a selec�on of a�achments such as breakers, munchers and selector grabs.

Our Caterpillar fleet consists of low ground pressure hi-drive D6 N LPG’S which are GPS ready, have 6 way blades and 360 camera’s. Our D5K LPG is the class leader in shaping and finishing projects are also available with a ripper a�achment.

Our Dehaco De-Dust 75mpt dust supression unit's are perfect for quarry and demoli�on environments.

We offer Na�onwide next day delivery where possible on are fleet of FH16 750’s opera�ng on 7 axles with road friendly suspension for lower environmental impact.

We also hire the highest spec Volvo FMX muck away �ppers on a self-drive basis. They are full highway spec including chapter 8, weigh loaders, front, rear and side camera’s, easy sheet and noise reduc�on air tail gates.

DIGGERS & DOZERS

All new Doosan ADTs are now equipped with an electronic transmission oil level sensor (instead of a dipstick system) which will make oil level checks a much simpler and more reliable process to carry out.

CPCS Red Trained Operator Card Upgrades Our assessors are available 7 days a week, nationwide and will travel to the site you are working on.

Prices start at £500 for full NVQ. Additional units are charged at £150 per unit CPCS Blue Card Renewal, Online Modular Tests £50 including new CPCS card CPCS Validation £50 per application on presentation of completed Log Book

CSCS Experienced Worker Blue Card To renew CSCS card you need to prove you have appropriate training & qualifications required to carry out your job.

NVQ L2 General Construction - starting at £550 NVQ L2 Highways Maintenance - starting at £550 CSCS Test - £37 CSCS Card + Application & Postage - £35

CSCS General Operative/Green Labourers Card This card is ideally suited for applicants that require the facility to gain access to work on construction sites but do not hold a recognised Construction qualifiation.

1-day Health & Safety Course - £130 CSCS Card + Application & Postage - £35 CSCS Test - £37 NRSWA Street Works Operatives or Supervisor Course - £550 NRSWA Street Works Refresher - £280

For more information, or to book any of the above please call our office on

01709 868 181

Bluetooth radios are now a standard feature of all Doosan ADTs and bring with them an improvement in safety levels. For an extra cost, buyers of Doosan ADTs can also choose the alternative of radios with the DAB+ function.

The Geofence system offers a new level of protection by ensuring the machine cannot leave a prescribed area. This is part of the machine software and can be set up using a Doosan ADT diagnostic tool. It is possible to adjust the Geofence boundaries and choose a speed limitation level (from 1 to 50 km/h, it is not possible to choose 0 km/h for safety reasons).

The speed limitation is activated 15 seconds after the machine crosses the boundaries of the area preset in the Geofence system. It is available from the factory on new Doosan Stage IV compliant DA30-5 and DA40-5 ADTs. For easier transportation, Doosan has developed a new roof beacon design with a quick release

or email to danielle.morris@cpassessments.co.uk

46

HIRE PURCHASE AND LEASING FOR UK CONSTRUCTION INDUSTRY

FAST, FLEXIBLE FINANCE Available across the full range of JCB’s and other types of equipment and machinery.

CALL NOW FOR AN INSTANT QUOTE:

0800 150650 www.jcb-finance.co.uk JCB Finance Ltd (registered in England No. 972265 Registered Office: The Mill, High Street, Rocester, Staffs, ST14 5JW) is authorised and regulated by the Finance Conduct Authority (Firm Reference Number: 708332). UK Business Users Only.

DIGGERS & DOZERS

light which is activated when in reverse gear and works simultaneously with the reverse lights. This feature is a mandatory requirement on some sites and is a very popular feature in the UK especially on dark or loud sites.

latch to enable operator to prepare the machine for transport in just a few seconds without the use of any additional tools.

The new options for the Doosan ADT range include electrically adjustable, heated mirrors which will allow the operator to adjust the position of the mirrors directly from the cab.

To meet strict safety rules demanded on some sites, Doosan customers can now order new Sears high performance heated seats. The new seats can be supplied with a choice of three different kinds of seat belt with a 2, 3 or 4 point design.

An optional white noise reverse alarm can also be installed as a replacement for the standard reverse alarm. The characteristic sound of this alarm is not only easier on the ears but can offer increased safety on noisy job sites. To confirm that the driver is using their seat belt properly, there is also an optional green seat belt roof warning light available that can be placed on the cab roof.

The rear position and direction lights on Doosan ADTs are now LED lights as standard, whilst the work lights, main lights and even the roof light bar are also available in optional LED versions. As well as improving visibility, the LED systems have longer lifetimes. Safety can also be increased by the additional hand rails for service and maintenance work that can now be installed on both the DA30-5 and DA40-5 ADTs.

The optional electrical refuelling pump may be useful on some job sites as is the air inlet precleaner, which complements the standard high performance 3-step cyclonic air filter in Doosan ADTs, particularly in very dusty areas where the increased amount of dust can cause shorter air filter lifetimes.

As a final option, the availability of a new preassembly painting system allows Doosan ADT customers to customise their ADTs and specify particular colours if they wish to match them to their existing fleets.

A new protection system for the rear lights avoids damaging the lights when reversing and is particularly useful in very tough applications. There is also the option of a blue or orange flashing rear

National Plant Hire Call: 0844 2251958 Email: hiredesk@land-water.co.uk

www.land-water.co.uk/plant-hire 48

DIGGERS & DOZERS

Load of Balls A fleet of JCB crawler and wheeled excavators is playing a ma jor role in a road construction project just metres from the factory where they were built.

Derbyshire-based earthmoving specialist, JC Balls & Sons, is working for a Carillion-Tarmac joint venture on the A50 Growth Corridor Project A, part of the National Infrastructure Plan, constructing a grade-separated junction on the A50 dual carriageway to the west of Uttoxeter.

“For digging corners on batters it’s a lot easier. The machine is really comfortable and with the Engcon I can get more work done before repositioning,” says JC Balls & Sons Operator, Jamie Chappell.

This performance and productivity boost has been echoed by JC Balls & Sons’ Contracts Manager Dane Potts, who has had to revise some of the planned works on the project, to incorporate the machine’s increased productivity.

The company is operating a mixed fleet of equipment on the project, including three 22-tonne JCB JS220 crawler excavators, a 36-tonne JS370, a wheeled JS175W and a 57C-1 compact excavator. Other machinery includes a JCB 714 articulated site dumper and a JCB VM115 soil compactor.

“Around 90% of our machinery on the project is already equipped with GPS machine control and we have found that it can cut the time on site almost by half,” he says.

Bought specifically for the A50 project, one of the JS220 models has been equipped with an Engcon E226 tilt-rotator, complete with the Engcon Positioning System. This is being used in combination with a Trimble 3D machine control system, providing new levels of control and accuracy.

“Tricky construction details are made easy by a simple level adjustment on the GPS controller. The combination of GPS with the Engcon tilt rotator is working really well and I’ve certainly noticed a difference in productivity. We’ll definitely be having more tilt rotators on our machines.”

49

DIGGERS & DOZERS

The Tarmac-Carillion joint venture is working on Project A of the A50 Growth Corridor scheme near Uttoxeter, Staffordshire. Project managed by Amey, the scheme is creating three new roundabouts,

two to the south and one to the north of the A50 dual carriageway. These have been joined by a new bridge structure and there will be extended slip roads to ease congestion on this busy trunk road.

50

DIGGERS & DOZERS

The project will provide improved access to a housing development and to new employment sites to the west of Uttoxeter.

Six 47m long steel bridge beams were lifted into place across the A50 this month (July), resting on piers that have been constructed using 210,000 tonnes of pulverised fuel ash (PFA) from the nearby Rugeley Power Station. Around 30,000m3 of existing material has been stabilised with the addition of lime, to provide increased structural properties and to reduce the amount of soil that has had to be taken from the site.

The project is expected to be completed by November 2018, when it will provide improved access and reduced congestion to this busy crosscountry trunk road.

Self Drive Plant

Aggregate Washing Systems   

S.E Davis & Son can offer much of its extensive fleet on 'Self Drive' hire to its customers in the quarrying and construction industries.

  

These items include: Loading Shovels - 1.5m to 5m capacity Tracked Screeners - 3 way up to 20' x 5' screen decks 360 Excavators - 15 tonnes to 45 tonnes Dump Trucks - 12 tonnes to 40 tonnes capacity Crushers - Tracked Jaw, Cone, Impactor Bulldozers - Including LGP & PAT blades

01527 893343



Small Working Footprint Quick set up time Fully re-circulating Water Systems through our Centrifuge Capable of processing up to 130T per hour Mobile & Static plants available Aggregate Washing Systems to suit your requirements Tracked Washed Plants now available

www.sedavis.co.uk

Sandhills Farm, Edgioake Lane, Astwood Bank, WORCS, B96 6BG

51

DIGGERS & DOZERS

Bobcat’s Forest Feller Bobcat has extended the company’s new range of forestry cutter attachments with a third model – the new FRC150ST – for use on the smaller Bobcat S630/H and S650/H skidsteer loaders and T590/H and T650/H compact tracked loaders.

The new FRC150ST complements Bobcat’s recently launched FRC150HT and FRC200HT high torque forestry cutter attachments, which are compatible with the larger Bobcat T770H and T870H compact tracked loaders, S770H and S850H skid-steer loaders and the A770H allwheel steer loader and provide cutting widths of 1.5 and 2.0 metres, respectively.

mulch behind when clearing trees and bushes for any kind of application. The variable front gate can be adjusted to provide the coarseness or fineness of mulch that the finishing requires.

Providing a cutting width of 1.5 metres, the FRC150ST forestry cutter is designed for continuous work on bushes and trees 100 to 120 mm in diameter, intermittent use for trees with a diameter from 150 to 200 mm and occasional use on trees 220 to 260 mm in diameter.

The FRC150ST incorporates many improvements over the previous FRC150 model. Among the improvements, the FRC150ST is manufactured almost entirely from Hardox, with a specially designed new fixed motor offering greater output and efficiency. The enhanced design also offers a new, lighter drum, with carbide teeth, new hose routing and greater performance and manoeuvrability.

Powered by a new high performance motor, the 1.5 m drum on the FRC150ST forestry cutter is equipped with 30 fixed long-life carbide teeth.

Other new features include three rows of counter cutters; a new adjustable push bar configuration; a new reinforced chain protection system at the back; a new HD belt cover; new adjustable skid shoes; a debris and seal application kit; an automatic drum brake system; an ACD Control

The FRC150ST forestry cutter mulches trees and underbrush in minutes − leaving a carpet of

52

DIGGERS & DOZERS

the loader door is opened.

system and a patented fixed knife rotor with tungsten carbide tips.

The Forestry Applications Kit protects the loader and operator from flying

objects and debris. It includes an impact resistant front door, which must be installed in order to operate the forestry cutter. A safety feature stops the cutter drum from turning if

Shields protect the lift cylinders against debris and help to reduce material build-up in the engine compartment.

Although daily maintenance is essential in this type of work, a debris screen on the radiator ensures continuous operation and makes cleaning up easier.

At UNIQUE TROPHIES we specialise in producing bespoke awards for exhibitions, marketing and promotional events, product launches, long service and retirement awards, as well as presentations to key customers.

Using scale models we reproduce miniature scenes based on any theme. Construction, demolition, off-road highway, transport, new vehicle displays etc.

Models can be sign written and repainted, miniature site boards produced and figures in PPE also included to personalise the presentations. The scenes and models can be mounted inside 1 gallon glass bottles, glass cases, or on polished hardwood plinths.

Each award is Unique, and an excellent way to promote your business with key accounts, marketing events , as well as rewarding long service or retiring loyal employees.

53

DIGGERS & DOZERS

Simulating Site Safety Chepstow Plant International have increased their focus on ADT safety and operator training to ensure that their quarry operatives are maintaining the best possible levels of safe working practice on site. Their Volvo Excavator Simulator training service is now also being offered to other contractors and quarry businesses.

“The ADT has become the vehicle of choice given its scope and capabilities - they’ve been used in a variety of applications over the years with a design that ensures the safety of the operator should anything go awry,” says John Corcoran, managing director of Chepstow. “We’ve analysed some of these by working alongside our quarry customers to find solutions, such as reviewing operating procedures to provide optimum terrain conditions for ADTs to work on, having trucks equipped with extra safety technology, supported by state-of-the-art operator training for ADT drivers.”

Having that many machines requires large numbers of highly skilled operators - all whom must be familiar with the latest equipment and capable of working in a safe, productive manner on site. The majority of the company’s work is in quarrying, so Chepstow routinely qualifies its operators to Mineral Products Qualifications Council (MPQC) Plant Operator Competency Scheme levels.

The company keeps an ADT Risk Register and changed its operating procedures. Every site where ADTs are going to be used is visited by Safety and Quality Manager, Steve Smith.

Among an extensive fleet of plant, in which the majority of excavating machines weigh in at 30-80 tonnes, Chepstow also operates a large number of articulated dump trucks. The company added 73 Volvo ADTs to their fleet in the past year alone.

“We thoroughly assess weather conditions, unstable or uneven ground levels, the plant being operated, pre-start daily inspections, tyres, haul roads, inclines and downhill haul sections, plus

54

DIGGERS & DOZERS

loading and tipping areas, and reinspect again a few days after work has started. For us, safety always comes before production,” says Smith.

“The training and familiarisation programmes we have rolled out focus us primarily on the behavioural approach for operation and supervision of ADT operations in line with the technical improvements we have developed,” says Smith.

In addition, one of Chepstow’s client partners, Tarmac, recently worked alongside them to develop an inclinometer that allows for an even greater safety margin during ADT operations, providing improved preventative controls to stop the rear chassis of an ADT from turning over in the kind of extreme terrain conditions that quarrying, by its very nature, is susceptible to.

The company has also been operating a complex Oryx Volvo Excavator Simulator for the past two years, training excavator operators before allowing them in the cab of actual machines, and has over the last 8 months purchased a second simulator for training for ADT and wheeled loader development. This is with a view to developing top calibre operators, not only to perform with optimum competency, but to have an understanding of the true purpose and capability of the ADT through the increased awareness and specific training.

“...in severe conditions, the rear chassis of an ADT can roll over leaving the cab safely upright, safeguarding the operator, but we would much rather there was never a situation where it risks being done at all!” says Smith. “Now, if the body of a truck tilts more than 9 degrees either left or right, the system will automatically alert the operator and stop the tipping hydraulics.

Likewise, if the body is down, the operator will be warned if the rear section of the chassis exceeds 12 degrees of roll angle during travel.”

The simulators provide a dual function - a unit has fold-down armrests that have Volvo wheeled loader controls in place, so it can be used for both loading shovels and articulated dumpers. It uses actual operating site data to deliver an incredibly

13.63 | 177hp

OUTSTANDING POWER, RESILIENT AND RELIABLE Built with minimal electronics to allow them to operate in the harshest of weather conditions and terrain, Venieri wheel loaders are extremely resilient and reliable.

CALL US TODAY FOR A DEMO

“Z” LINKAGE ERGONOMIC SEAT

Plant Hire Ground Works Small & Domestic Works

LOW FUEL CONSUMPTION MULTIPURPOSE JOYSTICK

HYDROSTATIC TRANSMISSION TOP PERFORMING TIER3 MACHINE

VENIERI 13.63 STOCK OFFER n

n

n

14,600kg max operating weight Perkins engine Spicer axles Bosch Rexroth transmission n

*Machine only, attachments are extra.

Low cost finance options are availble.

01588 620545

ONLY

CALL US TODAY FOR A NO OBLIGATION CHAT

£85,000 +VAT

01684 276095

www.rvwpugh.co.uk

www.glenearn.net

RVW Pugh Ltd, Mellington, Churchstoke, Montgomery. SY15 6TQ

55

DIGGERS & DOZERS

realistic driving experience with the entire unit tilting up to 23 degrees forwards or backwards, and up to 15 degrees to either side, meaning a seatbelt is necessary to remain in the seat.

training on the simulator, Jason has now passed his MPQC assessment and graduated to operating a Volvo ADT at the quarry.

“When I first got in, it was all new, but after just a few days I felt that I’d got my head around it, and it was a lot less worrying than getting straight into a truck,” says Rust.

Training exercises become increasingly difficult and longer in duration, teaching operators how to use engine and transmission braking and training them in vehicle manoeuvres, loading, hauling and production scenarios. The simulator even records how much fuel is being used, to allow drivers to see that their right foot has a direct effect on the running cost of the machine.

The simulators make life easier for trainee, and for trainer. There is a buddy seat in an ADT, unlike an excavator where the instructor has to stand clear of the machine while in radio contact with the trainee.

“The beauty of a simulator is that if anything does go wrong, it’s simply a case of pressing restart, which cannot be done in a live site situation,” says National Training Manager, Martin Stephens. “It only takes around 5 – 7 days to get to a point where significant risk can be managed.”

Chepstow has been testing the ADT simulators at Tarmac’s Mountsorrel Quarry in Leicestershire. The first trainee to prove the effectiveness of the machine was Jason Rust, an experienced construction site operative but a machine novice. Having undergone

GET AND RUNNING QUICKER

YOUR EQUIPMENT UP

FIX THE PROBLEM

FIRST TIME FIRST TIME FIX

97%

TOTAL NUMBER OF JOBS

345,178

1 JOB COMPLETED EVERY

90 seconds

Results for 2016

UK 0800 38 24 38 ROI 1800 74 78 35 www.pirtek.eu 1706044 H&P First Time Fix Ad.indd 1

28/06/2017 11:34

56

Versatile, Powerful, Compact Tracked and wheeled machines available with a wide range of attachments.

Please call us on: 0800 011 6828 or 07867 426919

norcar.co.uk

DIGGERS & DOZERS

Snorkel Bags German Order Ahern Deutschland, the sales and service provider for Snorkel lifts in Germany and Austria, has delivered two compact rough terrain scissor lifts, plus three low level units to German rental company, HVS Hubarbeitsbühnen.

The order, which is comprised of a Snorkel S2770BE and a S3370BE compact bi-energy scissor lift, along with two Snorkel TM12 self-propelled mast lifts, and a Snorkel S3010E self-propelled mini scissor lift, was handed over by Roman Heindl, Area Manager for Southern Germany for Ahern Deutschland.

Founded in 1996 by Mr. Friedel Sturhahn, HVS Hubarbeitsbühnen today operates a rental fleet of over 400 units, and employs 20 people. Due to the success of the business, HVS moved to new premises in Steinhagen in 2015 to accommodate the expansion of the fleet and the team.

“We have worked with Roman Heindl for many years, and we are very impressed with the level of customer and

58

technical service that we are receiving from Ahern Deutschland,” says Friedel Sturhahn, Owner of HVS. “On this particular order, we received a rental order for three low level machines on the same day that we were collecting the bi-energy scissor lifts. These low level machines were already in stock in Ahern Deutschland’s facility, so we were able to add them to the order and take them with us on the same day.”

“This is a major bonus for rental companies in the region.”

“The Snorkel bi-energy scissor lifts offer an particularly attractive solution to rental companies as a single unit can be rented to customers requiring either electric or diesel power,” says Bernhard Kahn, General Manager at Ahern Deutschland.

“They are also likely to be rented longer term, as a customer can use them on the rough terrain at the start of the project and then indoors as the building progresses. We are pleased that HVS were able to benefit from our ‘ready to rent’ stock machines, and thank Mr. Sturhahn and his team for trusting in Ahern Deutschland and Snorkel. We look forward to continuing to build our relationship with them.”

ENGINEERED FOR POWER, BUILT FOR THE TOUGHEST ENVIRONMENT

SPEED VALVE REDUCES CYCLE TIMES

CYLINDERS INCREASE POWER BY 20%

ADVANTAGES OF THE PDS SHEARS JAW PROTECTION SYSTEM BOLT-ON PIERCING TIP AND BLADES “ONE OF THE MOST POWERFUL SHEARS I HAVE EVER USED... THE PERFECT SHAPE FOR ULTIMATE VISIBILITY – A NEW GENERATION OF SHEAR DESIGN.”

INNOVATIVE SPEED VALVE DUAL UPPER JAW GUIDES FIXED JAW DESIGN 360 DEGREE ROTATION FULLY PROTECTED, HIGH POWER CYLINDER

A Force You Can Depend On

For more information call us today on +44 +44 (0)1403 (0)1903787 748 949 111 or visit www.prodem-attachments.com to browse our full product range

DIGGERS & DOZERS

Terex Goes Gen10 Scotland-based manufacturer Terex Trucks unveils its Generation 10 TA300 in Germany for the first time at Steinexpo (30 August – 2 September).

To celebrate the 10th anniversary of Steinexpo, Terex Trucks is attending the four-day exhibition with its newest articulated hauler, the Gen10 TA300. The 28-tonne capacity machine is set to take pride of place in booth C100 at Europe’s biggest basalt quarry near Homberg, Germany.

region, and it’s essential for Terex Trucks to continue to build its reputation in such an important market,” says John Mlonek, commercial sales manager at Terex Trucks.

The EU Stage IV emissions-compliant machine is the second product to be launched by Terex Trucks since its acquisition by Volvo Construction Equipment. The hauler also comes with upgraded hydraulic and electrical interfaces and improved aesthetics in order to maximise uptime.

The Gen10 TA300 is made to work harder for longer in the most testing terrains. Fit for purpose in a number of applications ranging from quarries, infrastructure developments, and commercial construction projects, the articulated dump truck features an enriched operator environment and sophisticated engine enhancements.

“Steinexpo’s 10th anniversary will no doubt be an impressive event and it serves as the perfect opportunity to introduce the Generation 10 TA300 to all our German customers,” says Mlonek.

“The new articulated hauler is well suited to various operations that are prominent in the

60

SOLUTIONS FOR EXTREMELY DIVERSE TRANSPORT TASKS

ECONOMICALLY ROBUST.

We feel completely at home in situations where the air smells of diesel and raw power is deployed. We are the experts when it comes to extreme transport solutions and we understand the tough conditions that trailers, semitrailers and heavy-duty systems are exposed to. We know the requirements of contractors and heavy-duty haulage fi rms in terms of solving their transport tasks both safely and functionally.

Goldhofer products are the result of over 300 years of investment, development of new technologies, and perfection of our customer service. One thing is absolutely clear; Economy is ultimately a function of high resale value, long term durability, and safety.

This is what we stand for and promise.

Invest in your future. Goldhofer – The Original.

WWW.GOLDHOFER.DE

DIGGERS & DOZERS

Volvo Passes ADT Milestone With half of all the articulated haulers ever made bearing the Volvo brand, the company has just passed another landmark – the production of its 75,000th hauler.

More than half a century after they invented the concept, Volvo Construction Equipment recently celebrated the production of the 75,000th articulated hauler. Having produced more than half of the articulated haulers ever made, a staggering 50,000 Volvo haulers are still in regular use around the world.

62

COMFORT ZONE

G SERIES WHEEL LOADERS 1. REVOLUTIONARY 2. BREAKTHROUGH VISIBILITY COMFORT

www.casece.com

3. OUTSTANDING OPERATOR PROTECTION

EXPERTS FOR THE REAL WORLD SINCE 1842

DIGGERS & DOZERS

The 75,000th machine – one of the new generation A45G full suspension models – rolled off the production line in late June at the factory where the first machine – the DDR631 or ‘Gravel Charlie’ – was made, in Braås, Sweden. And although Volvo articulated haulers can be found all over the world, the 75,000th machine is staying relatively local, going to Norwegian customer Leonhard Nilsen & Sønner AS.

“There’s no question that we have the best product, says Esbjörn Fritzell, Vice President of Volvo CE’ Trucks business platform. “The fact that so many of our haulers are still working around the world is a testament to their usefulness and durability – it’s almost impossible to kill a Volvo articulated hauler!”

While it took a while for the world to fully appreciate the benefits of articulated haulers, the machines are now in demand as never before, finding work as production machines in mines and on all types of infrastructure projects. This is driving the trend for larger machines – such as the newly introduced 41 tonne class size of the 75,000th machine, the A45G.

In typically Swedish style, the landmark 75,000 articulated hauler was marked modestly – with factory workers celebrating the achievement with ice creams. Then it was back to work, to meet the demand that is seeing Volvo take a bigger lick of the articulated hauler market.

“There’s not many companies can say that they are still the market leaders half a century after they invented a concept,” says Håkan Ask, business platform leader for Trucks at Volvo CE. “Having made 75,000 machines we are still showing the way, building more productive and fuel-efficient machines that are the envy of the industry.”

Over the last 51 years, the models have increased in size and sophistication. The first 15 tonne capacity machine built in 1966 can fit into the haul body of the A60H – Volvo’s flagship 55 tonne articulated hauler.

e r o o M John

e g d E e h t Has

s l o o T g n i g a g Ground En e t a l P t n a t is s e R s e t iv r s a a r Ab Replacement P Edge - Toe Plates Cutting

www.johnmoore.co.uk

sales@johnmoore.co.uk JOHN MOORE (TRACTOR PARTS) LTD, STEVENSON HOUSE, LADFORD COVERT, SEIGHFORD, STAFFORD, ST18 9QG

01785 282705 64

DIGGERS & DOZERS

ANGLIAN DEMOLITION CHOOSE ANACONDA DF410 FOR THEIR AGGREGATE OPERATIONS IN NORFOLK Norfolk-based demolition and asbestos removal company Anglian Demolition Ltd recently took delivery of a brand-new Anaconda DF410 Scalping Screener to screen contaminated C&D material to remove asbestos from aggregates before crushing.

Lee Storer commented, “We have had other machines in on demonstration from some of the world’s leading manufacturers, but when RK6 came in with the DF410 we were totally surprised by the performance, footprint and aggressive screen box that the Anaconda had to offer. The machines we trialed were all in a similar range as the Anaconda, but just did not provide the same separation of asbestos which is crucial to us to provide a saleable aggregate. Dan Flack from RK6 was always helpful and on hand to answer any questions we had”.

The Anaconda DF410 is one of the best compact scalping screeners in its range and

is the most popular machine that Anaconda Equipment currently manufacture. Weighing in at just 15.6 tonnes, it leads the way in aggressive screening of any machine of its size on the market today.

Variable speed belts and a high energy 3m X 1.2m (10’ x 4’) screen box it’s the largest in its class. All belts fold hydraulically and the machine has a fixed screen angle of 15 degrees. The machine can also be containerised for easy shipping requirements. There is the options of either JCB or Deutz engines and can come equipped with either Bofar Bars, Finger Screens, Punch Plate or Wire Mesh. A radio remote control is also available.08

For more information on the range of recycling equipment provided by RK6, please visit our website at www.redknight6.co.uk; alternatively email sales@rk6.co.uk or call the office on 01293 862619.

Paul Donnelly

Larry O’Rourke - Wear & Spare Parts Aaron McVeigh - South West England and Wales Dan Flack - London and Home Counties Silas Malcolm-Smith - Midlands and North East

66

07432 085591 01293 862619 07957 487017 07467 956303 07423 402565

KKB GROUP PARTNER WITH RED KNIGHT 6 LTD AND RUBBLE MASTER HMH GMBH TO PROVIDE THEIR CRUSHING TECHNOLOGY FOR THE FUTURE WITH AN ORDER FOR A NUMBER OF RUBBLE MASTER RM 120GO! IMPACT CRUSHERS

BIG BLUE!

Authorised Dealer in England and Wales

www.molsongroup.co.uk BRISTOL: Smoke Lane, Avonmouth, Bristol BS11 0YA Tel: +44 (0) 1179 820 123 WARRINGTON: Athlone Road, Warrington, WA2 8JJ Tel: +44 (0)1952 632 164

G8