Diggers & Dozers Magazine - Issue 11

DIGGERS & DOZERS ISSUE 11

TOUCH THE SKY WITH MAGNI

MAGNI TELESCOPIC HANDLERS UK LTD Arena Business Centre, Holyrood Close Poole, Dorset BH17 7FJ 01202 606326 a.white@magnith.com www.magnith.com

DIGGERS & DOZERS

Show & Tell The end of the year is fast approaching; a fact that leaves us with two choices. We can either look back and reminisce about the year that has been; or we can look ahead to the chapter yet unwritten.

Well, there is precious little we can do about the year just gone so let’s look ahead instead.

2019 promises to be a truly momentous year for the construction equipment sector as the planets align and the world’s biggest triannual show coincides with the UK’s largest biennial show and the UK’s only dedicated demolition equipment show too.

Unshackled by the need to meet tightening engine emissions regulations – at least for now while EU Stage V legislation lurks on the horizon – equipment manufacturers have already been beavering away in the background, introducing improved, enhanced and upgraded equipment throughout the past 12 months.

But a Bauma year is special. It is a week that comes around just every three years and – as sure as eggs is eggs – all of the world’s leading equipment manufacturers will arrive in Munich from 8 to 14 April 2019 with countless new and improved machines tucked conspicuously up their collective sleeves.

Of course, not everyone can make the trek to Munich; and with hotel rooms doubling and even trebling in price for the duration of the Bauma show, it is a potentially expensive undertaking.

But those that can’t or can’t afford the trip to Bavaria will get a second and – in some cases – a third bite at the big show cherry. If you can’t make it to Bauma, a good many of the new machines, attachments and systems shown in Germany will get an airing again at the PlantworX show that will take place at its new home – the East of England Arena – on 11, 12 and 13 June 2019.

And if you manage to miss that one too, and if demolition equipment is more your thing, you have a third opportunity to place your finger on the equipment industry pulse when the DemoExpo show takes place at the Hertfordshire Showground from 4 to 6 July 2019.

Of course, Diggers and Dozers will be at all three shows and will be reporting – in word, picture and video formats – on each of them. But rather than waiting for us to cover them, put those dates in your new 2019 diary, pop along, look out for us, and be sure to say hi.

3

EDITORIAL Editor Mark Anthony - Mark Anthony Publicity markanthony@markanthonypublicity.co.uk 07973 465 166 Assistant Editor Fred Anthony - Mark Anthony Publicity anthonyfreddie@googlemail.com 07973 465 166 SALES Sales Director Ben Chambers ben@chambers.media 01903 899942 Business Development Manager Ben Cumberland ben.cumberland@chambers.media 01903 899943 GENERAL ENQUIRIES info@chambers.media 01903 899823 CIRCULATION Mark Anthony - Mark Anthony Publicity markanthony@markanthonypublicity.co.uk 07973 456 166 PRODUCED & PUBLISHED BY Chambers Media Ltd Unit 1, 39 Chatsworth House, Chatsworth Road, Worthing, West Sussex BN11 1LY ben@chambers.media 01903 899823

Diggers & Dozers is published 6 times a year by Chambers Media Ltd. Articles and information contained in this publication are the copyright of Chambers Media Ltd and may not be reproduced in any form without the written permission of the publishers.

The publishers cannot accept responsibility for loss of, or damage to, uncommissioned photographs or manuscripts.

DIGGERS & DOZERS

X SERIES PRODIGY

4

DIGGERS & DOZERS

Teenager Blair Hughes has landed a dream job as a digger driver – and got straight behind the controls of a brand new excavator costing more than £100,000.

Ever since he was a young boy Blair Hughes, 17 has wanted to operate machines. Now his wish has come true after landing a job with the Glasgowbased Clearwater Group, operating a new generation JCB X-Series excavator, which has been launched to great acclaim following a £110 million investment.

Blair joined Clearwater straight from school and the company supported him through CPCS operator courses for excavators, ADTs, wheeled excavators and forklifts. When the company became one of the first in Scotland to purchase the new JCB 220X model from dealer Scot JCB, Blair was given the responsibility of operating the machine.

“I have always wanted to be a plant operator so I jumped at the chance to join Clearwater as soon as I left school,” says Blair. “As soon as I proved my ability and my work ethic, the leadership here and our customers were fantastic in allowing me the opportunity and responsibility to thrive.”

“The JCB220X is the best machine I have driven, it is the smoothest, has the most power and the comfiest cab ever. If I was spending my own money on an excavator, this is what I would buy.”

5

DIGGERS & DOZERS

Blair has primarily been using the machine at a landfill site near Grangemouth where it is performing a variety of heavy excavation duties including loading articulated dump trucks for transporting soil across site.

“Blair has followed my footsteps into the industry and I’m proud to see what he has achieved in such a short space of time,” says Blair’s father – Clearwater Contracts Manager Graeme Hughes. “It is testament to his skills and commitment that he has been welcomed and retained on site by customers at such an early stage of his career.”

“From the outset we were impressed with the look of the machine and it has not disappointed. Loading cycle times are significantly quicker than previous models and it is proving extremely reliable despite being worked hard.

“We have a longstanding relationship with Scot JCB going back 20 years. The service and response are the best in the business and we have always found the equipment high performing and reliable. As a result of the performance of the new X Series machine we have already ordered another one,

6

along with a 175W HRC and a JCB 531-70 Loadall telescopic handler.”

The brand new JCB 220X, 20-tonne tracked excavator model, launched earlier this year, has been designed to provide maximum operator comfort, durability and reliability in operation. Over a four-year development period, JCB has undertaken a programme of intensive component and product testing to achieve increased levels of build quality and reliability for customers in this advanced new machine.

YOUR MOST TRUSTWORTHY CO-WORKER HX130 LCR CRAWLER EXCAVATOR

REDUCED SWING FOR ADDED MANOEUVRABILITY

You have a lot to think about, so it helps to have a reliable workmate who is equipped to get the job done in any conditions. The HX130 LCR Crawler Excavator features the latest technologies for sustainable performance and smart, effortless operation. The ergonomic cabin includes an advanced infotainment system that makes your working day more enjoyable and productive. Reduced swing, with optional lock and control systems, improves safety and convenience on busy sites. Hyundai’s All-Around View Monitoring (AAVM) system acts as an extra pair of eyes, warning you when anything comes within five metres of your machine.

ALL-AROUND VIEW MONITORING

Thinking about adding the HX130 LCR to your team?

Go to www.hyundai.eu/dealers and contact your dealer for more details.

The air conditioning system on the Hyundai machines contains the fluorinated greenhouse gas refrigerant HFC-134a (Global Warming Potential = 1430). The system contains between 0.75 kg of refrigerant which has a CO2 equivalent of 1.0725 metric tonne.

DIGGERS & DOZERS

Volvo Impress in Georgia

A fleet of Volvo EC210B crawler excavators is helping to erect power line towers in the high-altitude, mountainous terrain of southern Georgia.

Georgian construction company Caucasenergo is currently engaged in a challenging project to construct power line towers in the most remote, mountainous regions of the country.

The high-voltage transmission towers are being erected 2,500m above sea level in Beshumi, a particularly rocky, hard-toreach region with very limited access to roads. This mean all Caucasenergo construction equipment is required to be extremely reliable and proficient in off-road mobility.

Caucasenergo is therefore using a fleet of EC210B crawler excavators to carry out the work.

8

They have proven to be efficient, convenient and easy-to-operate machines that can be adapted to any application.

“The Volvo EC210B excavators fully comply with the working conditions and are effective even in severe terrain conditions,” says Mandzhavidze Vakhtang, co-owner of Caucasenergo. “We began to cooperate with Volvo in 2014 and they have never disappointed us with their equipment offering.”

DIGGERS & DOZERS

The EC210B features a strengthened undercarriage frame; reinforced boom; solid superstructure with double welded corners; and greased, sealed track link to prevent leaks and guarantee long life. It also includes easy access, centralised lubrication points for simplified, ground level serviceability and greater uptime.

“The Volvo machines are extremely reliable. They of course all require maintenance from

time to time. For this, we call Elite Motors, our Volvo dealer based in Tbilisi,” says Gabriadze Levan, project manager at Caucasenergo. “Whenever they are needed, they are always there the following working day – sometimes even at the weekend – to help us resolve the issue.

This means our machines never stop for long, keeping project downtime to a minimum.”

Working in such mountainous terrain, the machines need to

9

be reliable and comfortable. The EC210B’s large and comfortable cab features ergonomic controls, vibration dampening and electronic climate control for allday productivity.

“I’ve been operating Volvo machines for one and a half years and I really like how comfortable, precise and responsive they are,” says Kalandadze Kakhaber, an excavator operator on-site. “I would recommend Volvo to all operators of construction equipment.”

DIGGERS & DOZERS

Builders Bobcat C & AJ Marshall Builders Ltd, based in Leeds in West Yorkshire in the UK, has purchased a new compact Bobcat TL30.60 telehandler for housebuilding projects, to carry out lifting and loading work and for handling recycled construction, demolition and excavation materials to be reused on site.

The new TL30.60 is backed by the three year/3000 hour warranty that is standard for all models in the Bobcat rigid frame telehandler range.

“We are very impressed with the new Bobcat telehandler,” says Ben Marshall, owner of C & AJ Marshall Builders.

“It complements the larger telehandlers we also run on our sites which are designed

more for lifting rather loading.

The new Bobcat TL30.60 is now a core component of the turnkey contracts we offer clients – covering everything from demolishing existing buildings, recycling as much as possible for use on site to building the new properties and handing them the keys at the end.”

In the turnkey contracts available from C & AJ Marshall Builders,

10

debris from demolished properties is sorted and with the sand, stone and aggregates dug from the site is fed by the TL30.60 into a compact crusher screen, from where it is stockpiled by the telehandler for reuse on the site. The TL30.60 combines this with other work such as the unloading, moving and lifting of pallets of bricks and other building products from trucks visiting the sites.

DIGGERS & DOZERS

Powered by a Bobcat D34 Stage IV engine with an output of 74.5 kW (100 HP), the TL30.60 at C & AJ Marshall Builders offers more power and a higher maximum travel speed of 40 km/h.

“We purchased the AGRI version of the TL30.60 telehandler, with a number of additional features providing higher comfort and productivity,” says Marshall. “The new Bobcat telehandler is fully road certified so that it can be driven quickly between sites to do different work. The boom suspension system is a really useful feature for travelling on the roads, keeping the boom stable and preventing it from bouncing over bumps.“ The Bobcat D34 Stage IV engine offers electronic fuel injection; High Pressure Common Rail technology; turbo-charged air management and Cooled Exhaust Gas Recirculation for lower emissions and does not require the use of Diesel Particulate Filter (DPF) technology.

Described by Bobcat as a compact productivity model, the TL30.60 provides a maximum lifting capacity of 3 tonne, a maximum lift height on its 24 inch tyres of 5.9 m and a maximum horizontal reach of over 3 m.

it with a number of attachments including opening/closing pallet forks, a 1.4 m3 rehandling bucket and a 0.8 m3 4-in-1 combination bucket.”

As an AGRI version, the new TL30.60 telehandler also includes air conditioning; an automatic fan inverter; a Sears high comfort air suspension seat and premium cab finish (deluxe steering wheel, armrest, aluminium panels); a trailer brake valve and a drawbar coupler tow hitch.

Like all new generation TL models from Bobcat, the TL30.60 offers several other higher comfort and productivity features, including Power Lift, an efficient lifting technology that optimises the use of hydraulic flows between telescopic boom cylinders to increase the lifting capacity; an automatic parking brake for enhanced safety and operator convenience and Boom Cushion Retract, that automatically slows down the boom speed when the boom is nearly fully retracted or at min/max angles, increasing safety and operator confidence.

“The telehandler provides good lifting capacity and lifting heights. It also meets our requirement for having a relatively small footprint, being able to work and move within the confined spaces on our sites.

We get the most out of the Bobcat telehandler by using

11

The TL30.60 also offers a number of tried and tested smart operating features as standard – the SMS (Speed Management System), which allows the travel speed to be adjusted independently of the engine speed; the SHS (Smart Handling System), which allows the speed of the boom movements (lifting, telescoping and tilting) to be adjusted, depending on the type of work being carried out; AFM (Auxiliary Flow Management), which allows the hydraulic output to be adjusted to match attachment requirements and to set a continuous flow and the FCS (Fast Connect System), which provides quick and easy interchange of hydraulic attachments via an integrated pressure-release system.

Another standard feature is the ECO mode, which maintains optimum hydraulic performance without using the engine’s full power, adjusting the main machine features to produce a balance between top performance and providing the best performance/fuel consumption ratio.

Naked Ambition

DIGGERS & DOZERS

Equipment manufacturer Hyundai is targeting a Top 5 position in the European market and has invested heavily to make this lofty ambition a reality. Mark Anthony reports from the company’s new European headquarters in Tessenderlo, Belgium.

There is a large part of the first floor of Hyundai’s relatively new 81,000 m2 European headquarters that sits silent and empty; strangely at odds with the busy 10,000 m2 equipment demonstration area located close by at which excavators track and slew and wheel loaders dart hither and thither.

But a large empty office suite is not a sign of a company in decline. Rather, it is an indication of a company’s ambitions for growth and expansion. That office space is not presently required. But if the company achieves even a fraction of its lofty ambitions, it most certainly will be.

Beyond Criticism A decade or so ago, construction and demolition equipment manufactured in South Korea was largely looked down upon.

Perhaps unfairly, it was labelled as lower quality than the machines built by some of their European rivals. Questions were asked about equipment reliability, the availability of parts, the responsiveness of aftersales service, and residual values.

By embracing technology, reducing engine emissions and laying to rest concerns over machine reliability, those Korean manufacturers have largely moved beyond such criticisms and it is now the turn of the Chinese manufacturers to have their quality called into question.

13

DIGGERS & DOZERS

Same as it ever was. In the late 1980s and early 1990s, Japanese manufacturers were the target of similar criticism. Just a few decades on and the likes of Komatsu and Hitachi are seen not just as quality manufacturers but as recognised leaders in their chosen field.

So when Hyundai states that it is aiming to be one of the construction equipment market’s Top 5, we dismiss such bold ambitions at our peril.

Little to Choose Although equipment manufacturers will unquestionably tell you otherwise, there is very little to choose between most excavators on the market today. And for good reason. Many share the same or similar engines, transmissions and hydraulic system; some even originate from the same factory but are sold in different colours and with different badges.

Often, the key differentiator – the things that mark a premium brand from a medium one is a matter of the bells and whistles; the little extras. Yet even those are remarkably common today.

Most excavators above a certain size have air conditioning as standard. Most are offered with a variety of standard, comfort and fully adjustable seats. Some are offered with the peace of mind of telematics systems that monitor functions such as hours worked and fuel consumption, that identify faults before they evolve into costly downtime, that optimise service intervals and help minimise unplanned downtime. Caterpillar has all these things. Komatsu has all these things. So does Liebherr and JCB. And so does Hyundai.

Indeed, sitting in one of its excavators, you could be

mistaken for thinking you were in what could be described as a “high-end” machine. Because you are.

Here in the UK, these machines are sold and supported by reputable and longstanding dealers such as Molson and Ernest Doe; firms that don’t just move metal but which also have a reputation for being able to look after it once it’s sold too.

Justifiable Confidence Hyundai recognises that it is at the beginning of a journey and that it has many obstacles and long-established objections and perceptions to overcome before it can truly take its position at the industry’s top table. But the whole company exudes a swagger and a confidence not normally associated with an organisation playing catchup with more established rivals. The new European headquarters represents a significant investment; the kind of investment companies only

14

make when they are certain of themselves. The dealers it has appointed speak to a desire for pre and post-sale credibility. And the build quality and constant evolution of the machines themselves show a company that has come a long way and yet which remains eager to improve.

Perhaps the greatest example of the company’s current confidence is its willingness to throw open the doors of its European headquarters to dealers and customers alike. “At Hyundai Construction Equipment Europe, we believe the best way to feel the Hyundai effect is to meet with us and exchange experiences,” says Paul Sysmans, Marketing Manager Europe at HCEE. “Our intention is to offer our customers, prospects and dealers a total and unique company experience that goes beyond traditional trade shows. A vital part of the customer journey is the machine experience. The only way to

Your Used Your used equipment is our business and your time is your most valuable asset.

ASK YOURSELF...

1. Do you buy or sell used plant machinery?

2. Are you too busy to look for new additions to your fleet?

3. Do you want to capitalise on trading internationally?

If you answered YES to any of these questions, then we could help your business become more productive.

LET US

About Us

• Assist with your fleet renewal • Source your new and used equipment • Sell your used equipment • Negotiate on your behalf • Handle invoicing • Take care of logistics Let our experience recoup the highest possible return for your business

Shifnal Plant Limited’s Managing Director, Richard Carless, has 18 years’ experience in this fantastic industry. Employed by Finning UK Limited, the CAT Dealer, he held various management positions, representing Finning UK both in the UK and Ireland and around the world in different roles. Loving his role as Used Equipment Manager, over a 4-year period, gave him the passion and desire to start Shifnal Plant Limited.

Shifnal Plant Limited 1st Floor Offices, Molineux House, Shifnal, Shropshire, TF11 9AZ

info@shifnalplant.com

01952 743305

www.shifnalplant.com

Richard Mobile: 07801 049395

DIGGERS & DOZERS

know how Hyundai equipment will perform at a jobsite is to put it at work.”

For all its unquestionable confidence and ambition, Hyundai is under no illusions about the challenge ahead. If it is to be accepted as one of the industry’s Top 5 manufacturers, it will need to overtake some seriously good and wellestablished rivals.

However, as I said previously, it is just a few years ago that the likes of Komatsu were being dismissed as enthusiastic upstarts. The path that lies ahead of Hyundai climbs steeply and is fraught with dangers. But it is a path that has been trodden before. And it would take a brave man to bet against it being trodden again.

Odour & Dust Control Specialists We are now able to offer: • Our fire suppression system Firetrace ideal for protecting all types of large plant and machinery.

• Our cab pressurisation systems Freshfilter to protect machine operators.

01560 480822 For more information please email office@odourdust.com

www.odourdust.com 16

BREAKING NEW GROUND Made in the UK

BMC make all types of buckets, grapples, crushers, rippers etc for excavators from 0.7 up to 55 ton all here in the UK, give us a call or send us an email with youR requirements.

Bespoke

Tailor-made products to suit your business, improving efficiency and saving you money!

Extreme Rock

Tile Drain

Trapezoidal

4 in 1 Bucket

Ripper Hook

MANUAL HITCH’S Now Available! www.bmc-buckets.co.uk Telephone: 01291 630073 Email: sales@bmc-buckets.co.uk The Bucket Manufacturing Company, Unit 6c/d, Bulwark Industrial Estate, Monmouthshire NP16 5QZ.

Scandinavian Style Bucket

DIGGERS & DOZERS

Liebherr Go BIG For BAUMA CHINA During Bauma China 2018, Liebherr presents a selection of its construction equipment and its component’s product ranges.

The Liebherr stands at the Shanghai New International Expo Centre (SNIEC) are located outdoors, booth No. B12 and indoors in hall N4, booth No. 524.

From November 27-30, Liebherr displays eight pieces of equipment for multiple industries and applications. The Liebherr outdoor booth provides room for the R 966 and R 920 crawler excavators, the A 920 mobile excavator, the L 550 wheel

loader, the PR 776 crawler tractor, the R 9100 B mining excavator and the HTM 804 QING truck mixer as well as the LTM 1300-6.2 mobile crane.

Furthermore, Liebherr presents various components from the areas of mechanical, hydraulic and electrical drive system and control technology at its indoor booth.

High-quality equipment from Liebherr defines superior productivity and high efficiency.

Liebherr’s presence at Asia’s most important trade fair for construction machinery shows its appreciation and awareness of

18

the growing markets in the AsiaPacific region.

The mining division of the Liebherr Group presents the new R 9100 B mining excavator for the first time at Bauma China 2018. The new model replaces the R 9100, which has been on the market since 2012. This B-version has gone through a strong upgrade and improvement process.

It is therefore expected to clearly deliver an incredible performance.

The Liebherr R 9100 B presented at Bauma China has an operating weight of 113 tonnes (125 tons) and is equipped with a 7.5 m3 (9.8 yd3) Evo backhoe Bucket combined with the Liebherr Ground Engaging Tools. The Liebherr D9512 diesel engine delivers a performance of 565 kW (757 HP).

McCloskey Equipment‘s complete line of field-tested high performance crushers, screeners, trommels and conveyors serve industries worldwide including construction & demolition, mining, aggregates processing, waste recycling and many more.

All McCloskey products are carefully designed by a dedicated team of engineers, manufactured with high quality components, and field-tested to ensure maximum performance.

Discover why McCloskey is an industry leader, and the largest independent manufacturer of portable crushing and screening equipment in the world.

STACKING CONVEYORS

SCREENERS

CRUSHERS

SUPPLIERS OF CRUSHERS, VIBRATING SCREENERS, TROMMEL SCREENERS, STACKING CONVEYORS AND WASTE RECYCLING PLANT FOR A RANGE OF INDUSTRIES

MCCLOSKEY EQUIPMENT LTD. TROMMELS

Ph: +44 (0) 1235 832 407 Email: sales@mccloskeyequipment.co.uk Web: www.mccloskeyequipment.co.uk

DIGGERS & DOZERS

Amongst other new features, the Liebherr R 9100 B comes with a renewed cabin, a new swing pump and an integrated Connectivity Kit to collect on-site operating parameters.

The PR 776 is Liebherr’s largest crawler tractor and for the first time on display in China.

The machine in the 70 tonnes category was introduced at Bauma Munich in 2016 and is designed for tough mining and quarry operations. It has a maximum operating weight of 74 tonnes and is equipped with blade capacities of 18,5 m³ (semi-U blade) or 22 m³ (U blade).

At the trade fair Liebherr exhibits the wheel loader L 550, an example of its expanding wheel loader product range for the Chinese market. Due to the hydrostatic driveline, the L 550 is – like all Liebherr wheel loaders – very fuel efficient, consuming up to 25 percent less fuel compared with conventional wheel loaders under the same conditions. The optimum weight distribution of the machine increases the productivity at work, because larger buckets can be used to handle more material with each loading cycle.

its various attachments and optimised kinematics.

The Liebherr R 920 crawler excavator is on display at the 2018 Bauma China. It unites power, precision and versatility, which ensures excellent performance. The R 920 has an operating weight of 21 tonnes and an engine output of 110 kW / 150 hp. Equipped with the latest hydraulic system, it is suitable for light and heavy tasks. It also

The 70-tonne class R 966 is also among Liebherr’s exhibits at Bauma China. Its optimised hydraulic system together with intelligent operating modes allows it to work at maximum productivity, whether in earthmoving or quarry operations. It features a V8 diesel engine with high torque even at low speeds. Additionally, it is equipped with a Liebherr bucket and tooth system, which guarantees easy penetration and simple extraction, where digging and breakout forces of 308 kN and 354 kN ensure fast and efficient working cycles. The R 966 proves its versatility with

20

features an automatic centralised lubrication system and intelligent energy management, which increases productivity.

Furthermore, its bulldozer blade and various attachments make it indispensable. The operator’s comfort is at the forefront for Liebherr as well. The operator’s cab includes a new seat, touch screen, and larger windows; not only does the driver have a better view, but it also ensures a safer work environment.

REDEFINING THE

HYBRID REVOLUTION

Authorised Dealer in England and Wales

www.molsongroup.co.uk Bristol: Molson Group Ltd, Smoke Lane, Avonmouth, Bristol BS11 0YA Tel: +44 (0) 1179 820 123 Warrington: Molson Group Ltd, Athlone Rd, Warrington, Cheshire WA2 8JJ Tel: +44 (0) 1925 632 164

DIGGERS & DOZERS

Bobcat’s Sand King

Cost effective alternative to skips & suction wagons

Concrete Washouts & Water Treatment Solutions

The fluvial beaches are authorised for bathing and lie alongside the spectacular Douro River in the Gondomar Municipality to the east of the city of Porto. The SC200 sand cleaner provides a more comfortable and efficient means of cleaning sand on beaches or river banks and is being used with a Bobcat T590 compact track loader to carry out the work.

Water Treatment Solutions

Settlement Tanks with coalescing media, can be used with flocculants and hydrocarbon filter pads.

Concrete Washout Systems

Simple Solutions for washing off concrete wagon chutes and equipment

A new Bobcat SC200 Sand Cleaner attachment is being used to clean river beach areas in Portugal

Larger capacity and Bespoke Systems also available For further information contact KELLY TANKS on 01889 508944 or email info@kellytanks.co.uk

“The sand cleaner attachment from Bobcat is an excellent piece of equipment that has brought great gains in terms of efficiency, effectiveness and quality in the cleaning work. With the new Bobcat sand cleaner, the work is done faster and saves on resources,” says José Dias, who is responsible for providing the service.

The Bobcat sand cleaner is used to clean the riverside beaches of Lomba, Moreira, Melres, Cebreiros, Gramido and Ribeira de

22

DIGGERS & DOZERS

Abad, covering a total area of approximately 45,000 m2. “The cleaning service was previously carried out by a small sand cleaning machine, about 30 years old and with very low performance, so we have improved service, productivity and profitability as well.”

One of the advantages of the new Bobcat sand cleaner is that it can be used on both dry and wet surfaces. The sand on fluvial beaches has a different constitution to that found on maritime beaches. River beaches can also suffer from the presence of deep rooted undergrowth. This is normally removed from the sandy areas out of season. With the new Bobcat attachment, this work is now providing a yield four times higher than the equipment previously used and to a higher quality.

“The cleaning of all the sandy areas is now carried out over 8 to 10 days, depending on whether or not the sand is dry or wet, compared to the 30 to 40 days it needed in the past. The Bobcat loader package with the sand cleaner provides a solution that costs half as much as a dedicated sand cleaning machine for the same application. Cleaning with this implement is much cheaper thanks to the short cycles and high productivity of the Bobcat loader-sand cleaner combination,” says José Dias.

With a working width of 1900 mm, a working depth of up to 200 mm and a bucket capacity of 350 l, the Bobcat sand cleaner is a high performance attachment which allows the loader operator to quickly sift sand/soil and collect debris and waste as small

23

as cigarette stubs. As well as cigarette stubs, the sand cleaner can also pick up other small debris such as bottle caps, broken glass, pieces of wood, cans, stones, rocks, plastic bags, syringes and seaweed.

Capable of covering a large area at a rate of up to 15,000 m²/h, the high productivity offered by the Bobcat sand cleaner is complemented by the high discharge capability. This is provided by the lift arms on the loader and the hydraulic hopper gate on the attachment, allowing the debris to be easily dumped into a waiting truck.

The SC200 sand cleaner is compatible with both the standard and high flow versions of the Bobcat T590, T650, T770 and T870 compact track loader models.

DIGGERS & DOZERS

Caterpillar Sees Red Caterpillar machines, engines, generator sets and work tools will soon have a new look.

The equipment giant is replacing the current “Power Edge” trade dress (Cat trademark on a black background accented with a diagonal red bar) with a fresh new graphic design called “Cat Modern Hex.” The Cat Modern Hex design combines the traditional Cat trademark and product

model names with a bold, threedimensional red hexagon and grille pattern. The red colour is a throwback to the graphics used on the company’s very first crawler tractors in 1925.

The Cat Modern Hex was designed by the Caterpillar Industrial Design

24

Group. “Our goal was to create something with a premium look and feel,” said Ed Stembridge, product identity manager. “When you combine the Modern Hex design with our distinctive Cat product designs, it visually reminds customers they are buying and using the best products on the market.” In addition to machines, gen sets and engines, the new trade dress will be used on Cat parts packaging and various licensed products such as toys and scale models. Cat products that are no longer in production will not be updated.

Look for the Modern Hex design on newly-manufactured Cat products in the near future as Caterpillar updates its whole product line by early 2020.

The New Bobcat R-Series.

Available to order from official Bobcat dealers MTS Plant.

Official Dealers

Contact MTS Plant to Enquire: Tel: 0800 0156 55 info@mtsplant.co.uk | mtsplant.co.uk

DIGGERS & DOZERS

JCB Open Edinburgh Depot JCB Chairman Lord Bamford has today officially opened a brand new Scot JCB depot in Edinburgh – over six times the size of its predecessor – which is set to bring several new jobs to the region.

Located in Sighthill, approximately five miles west of the city centre and a quarter of a mile from existing Scot JCB depot, the brand new facility follows a massive investment by Scot JCB to further enhance its service to customers across the East of Scotland. New roles created by the move will include Engineers, Parts Advisors and Apprentices.

6000m², the new depot enables Scot JCB to significantly enhance its on-site offering in Edinburgh. Key benefits include a huge increase in the workshop and warehousing space available, a training room with AV facilities and an overhead crane which brings greater workshop efficiency and enables operation on far larger plant and machinery.

Strategically positioned near the main road network, the new Edinburgh base gives motorway access via the M8 to central Scotland and Glasgow, the M90 to Fife, Tayside and the north, and the Edinburgh bypass to East Lothian and the Scottish borders.

Its ownership of the adjacent plots will also allow future flexibility and further growth opportunities for Scot JCB as required.

“Scot JCB is one of the largest JCB dealers in the world and has continued to expand and be successful by investing for growth,” says JCB Chairman, Lord Bamford.

“This new depot will take sales and service to a whole new level and ensure the service provided to customers goes above and beyond expectations.”

Occupying a site of 1.4 acres, with a total building footprint of over

“The opening of this new, purposebuilt facility is hugely exciting for Scot JCB,” says Scot JCB Group Joint Managing Director, Robin Bryant.

26

“Every aspect is bigger and better than before and the overall impact will be a significant enhancement of the fantastic service we are able to deliver for our customers. “The culmination of major investment and several years of planning and development, it underlines our commitment to customers and our belief in the potential for growth in this key area of Scotland.

“The scale and the calibre of the facilities here will deliver tangible improvements to the availability of equipment and the speed and quality of the experience we provide to our customers.”

Over a year in construction, the purpose-built new depot is over six times larger than the one it replaces. It features four double workshop bays, automated oil and services delivery to the central workshop module, a 225m² parts warehouse, sales office, training room and a huge yard for

DIGGERS & DOZERS

showcasing new and used equipment.

It shares the longestablished industrial estate with a variety of major organisations including: Scot JCB’s own customers GAP Plant & Tool Hire and Jarvie Plant along with leading motor retailers such as Arnold Clark, Evans Halshaw and Lookers.

Scot JCB has supplied and serviced JCB machinery for over 50 years, growing into a highly specialised machinery distribution business operating through a network of seventeen depots from Muir of Ord north of Inverness, down to Carnforth in Lancashire.

INNOVATION OF THE YEAR

TRAILER MANUFACTURER

HEAVYWEIGHT 5+ AXLES

Made for your mission.

2018 WINNER

REFERENCE #30:

TRANSPORTING AN EXCAVATOR TO A DOWNTOWN LOCATION. 40 TONS, 3.5 METERS WIDE. An agile workhorse thanks to revolutionary axle technology. For outstanding vehicle handling and optimum maneuverability on- and off-road: the semi lowloader with »MPA axle technology«.

Manufactured by Goldhofer. Made for a mission. Your mission?

MPA

WWW.GOLDHOFER.COM

27

DIGGERS & DOZERS

Ridgway Invests for the future Shropshire plant hire company, Ridgway Rentals Ltd., is making a £17.5 million investment in new machines to cope with current and future demand.

The huge shopping list of nearly 200 machines has been split between four manufacturers.

Hydrema, JCB, Hitachi plus the lion’s share of £12 million going to Komatsu. The deal comprised of several excavators ranging from 13 up to 50 tonne including zero tail swing, long reach and high reach demolition models plus a number of 12 tonne articulated rear tip site dumpers, new 7 tonne high visibility dumpers, 1.5 to 8 tonne mini excavators plus intelligent excavators and dozers with GPS control.

The majority of machines ordered are manufactured in the UK! British icon, JCB in their Uttoxeter plant and Komatsu’s UK plant in Chester-Le-Street, near Newcastle-Upon-Tyne where Komatsu produces its hydraulic excavators. World demand for construction equipment and the weak pound has meant that a large quantity of the UK’s used equipment has

28

been exported abroad, creating a shortage of equipment to rent – just as the construction industry begins to gain momentum!

The orders were placed following a number of months of negotiation and have been arriving into Ridgway’s main depot near Oswestry in Shropshire in a steady stream, usually to go straight out on hire!

Ridgway Rentals Ltd. is a family owned and run plant hire business that has its routes going back to the 60’s. Group Chairman, Tim Jones, is confident that this recent expansion of the fleet will enable the company to give its customers the equipment it needs “Our service is giving our customers what they want when they need it.”

Stuart Jones, Managing Director explains that by having the right equipment when our customers need it means that they in turn increase productivity “All our new equipment is of the latest technology and include the latest emission control! Machines also comply with the latest Health and Safety legislation including all round vision for the operator via intelligent camera systems.”

Stuart continues, “A number of the new Dozers and Excavators will also be equipped with lasercontrolled GPS technology, our job is ensuring that our customers have access to the latest technology so that they can be more productive and operate safely, damaging the environment as little as possible – you can only do this by having the latest equipment.”

4th-6th July 2019 Hertfordshire Showground Find out more at: www.demoexpo2019.com

Join us at the demolition industry’s biggest and best event!

There’s nothing quite like seeing demolition in action!

National Federation of Demolition Contractors

Voice of the Global Demolition Industry

Tel: 01442 217 144 email: info@demolition-nfdc.com

DIGGERS & DOZERS

Volvo Power Pipeline Productivity Equipping construction machines with a digital voice has brought a new level of productivity to an international energy project piping gas from the Caspian Sea to Europe.

The project; TAP, is scheduled to cost 4.5 billion euros and covers 878 km both onshore and under the sea, from Greece to Italy. French-based international pipeline contractor SPIECAPAG is carrying out the onshore work of 187 km across Greece and 215 km through Albania. When complete, the pipeline will open up a huge new source of natural gas to markets across the whole of Europe.

For a project of this size every second counts – and being able to avoid machine breakdowns is of vital importance. But TAP has been able to report zero engine failures on one sprawling stretch

of pipeline in Albania, partly thanks to the introduction of a suite of telematics on every Volvo machine operating across the region.

Since September 2016, Proactive Monitoring has been active on all 91 of TAP’s new machines in Albania (eight EC300DL excavators, 57 EC380D/El excavators, 16 EC480D/ELs excavators and 10 A30F articulated haulers).

Proactive Monitoring, an intelligent telematics system provided by Volvo Construction Equipment (Volvo CE) allows its machines to communicate with workers on and off site. It works behind the scenes to monitor all aspects of machine health, sift through thousands of

codes and alarms and highlight only the most relevant.

“We have tremendous support from our Hub West Aftermarket Team, as well as our local dealers T&C and Saracakis,” says odrigo Konda, Director of Global Key Accounts at Volvo CE. “The combination of having local technicians on site, a stock of spare parts and the right training to cope with any challenge allows us to efficiently manage this large fleet. But Proactive Monitoring was the icing on the cake to make sure our local team was able to immediately investigate and pinpoint any problem. SPIECAPAG is impressed that we are able to spot and fix the problems so quickly and secure maximum uptime for their fleet.”

“The ambition has always been to improve dealer efficiency,” says Abhijit Menon, Product Manager for the Proactive Monitoring Service. “Traditional monitoring systems risk information overload, making it almost impossible to work through all the monitoring signals and error codes – and spot the issues that really matter.

Instead the dealer can now provide a complete one-stop-shop solution for data management.”

30

DIGGERS & DOZERS

Centre of Europe Bobcat has announced the opening of a new distribution and spare parts centre for Europe, the Middle East and Africa (EMEA) in Halle, Germany.

As a result of a multi-million euro investment and utilising the very latest in warehousing and sorting technology, the new centre will ensure the speedy delivery of spare parts and other components to dealers and customers throughout EMEA. Over time, the Bobcat dealer and customer bases in EMEA have grown rapidly, resulting in a significant increase in their needs and expectations. Currently, Bobcat has around 180 dealers in 75 EMEA countries. By investing in the new state-of-the-art facility in Halle, Bobcat will ensure the fastest service for the company’s dealers and their customers.

Located close to Leipzig Airport, the new 43,000 m2 Bobcat Aftermarket Service Centre covers an area equivalent to 14 full-sized football pitches. Over 150,000 different spare parts and components are stocked in the new centre. These are delivered from Bobcat factories (in USA and Europe) and certified suppliers from around the world and made available directly to dealers and their customers in EMEA. With a current fill rate of 95 percent, the new distribution centre has already exceeded the performance level planned for its start-up.

The centre is also responsible for supplying aftermarket products to the Parts Distribution Centre (PDC) in Dubai in the United Arab Emirates. The Dubai PDC supplies spare parts to Bobcat and Doosan Portable Power dealers in the Middle East and East Africa.

In addition to the excellent connections provided by Leipzig Airport, the door-to-door proximity with the DHL main European delivery centre and the motorway network on its doorstep, Halle was chosen as the location for the new building because of the strategic importance of the German market for Bobcat.

“With the high investment in the new distribution centre, we are also very clearly committed to EMEA as a region,” says Paulo Florindo, EMEA Aftermarket Senior Director, Doosan Bobcat EMEA. “The new centre will enable us to supply our customers even faster and more flexibly with everything they need. With 130 new jobs created, we are confident we will provide the best service.”

Customers and dealers alike are impressed by the efficiency of the new spare parts centre.

“We at Marep GmbH have been Bobcat dealers for over 10 years now and have most of the parts we need in our warehouse. But sometimes it happens that 2 or 3 customers simultaneously register their machines for the same day

32

DIGGERS & DOZERS

for review and so it is good that we can order parts from the warehouse in Halle overnight by express, in order to have them the next morning, to continue the work needed as usual,” says Johannes Vlach, Managing Director of Marep, the Bobcat dealer in Northern Germany.

our customer service. The high availability of original spare parts guarantees customers a fast delivery of required products and the least possible downtime. We will continue to work on improving

our customer service, because customer satisfaction is our greatest asset, which together with our high product quality forms the basis for our success,” says Paulo Florindo.

“Thanks to the continuous support of the Bobcat aftermarket team, we have grown as a company, but above all we have been able to create a loyal and stable customer base. By improving the timing of parts delivery, which today we are able to provide in 24 hours, we have met the ever-increasing needs of our customers,” says Alessandra Silvagni, Marketing and Communications Manager at DMO, the Bobcat dealer in Northern Italy.

“The new distribution centre is another step in enhancing

THE COMPLETE PARTS PACKAGE

WE SUPPLY PARTS FOR ALL VOLVO MACHINES

• 25 years experience with Volvo Dump-Trucks • Your choice of Swedish quality SLP or genuine OEM • Selected-used or refurbished parts • All models catered for and all ages • Big savings • Engine and transmission rebuilds • Maintenance and repairs • Export enquiries welcome

Several 25 and 30 tonners available T: +44 (0)1777 709533 E: sales@walker-plant.co.uk Walker Plant Services Ltd, Leverton Road, Retford, Notts, DN22 0DZ

33

www.walkerplant.com WPS Ltd has no affiliation or connection with, or approval by the VCE organisation

DIGGERS & DOZERS

Barford going global Barford Equipment, the UK based manufacturer of world leading track, mobile and stationary screens, wheeled and tracked conveyors plus trailers, has just announced three new equipment models meeting demand from global customers for high specification and competitively prices solutions.

“The world’s construction machinery, aggregate, quarrying and mining markets have long appreciated the equipment available under the Barford banner and over recent months we have significantly expanded both the range of machines on offer as well as the global distributor base from which they can be sourced,” says Stephen Murphy, Distribution Manager for the Barford product range. “Barford is a well-known brand in the UK and across Europe, having built an enviable reputation and possessing a long and illustrious history, but it was relatively unknown in the US market; but that’s changing.”

The new Barford models being introduced this summer comprise the TR8048 Track Mounted Stockpile Conveyor; the BF7042 Tracked Mounted Bin Feeder; and the SM312, a Single Axle Mobile Double Deck Screen.

TR8048 Track Mounted Stockpile Conveyor has an 80ft reach and a 48” wide belt. It also includes a twin-drive discharge belt complete with hydraulic slew hubs and a Cat 2.2 turbo engine with hydraulic oil cooler and a remote control movement.

The BF7042 Tracked Mounted Bin Feeder has a 42” wide belt

and an extended reach of 70ft.

Other features include a twindrive discharge belt complete with hydraulic slew hubs and a Cat 4.4 elect automation control movement. It also ships with a ‘Mulch’ option that has an agitator attachment to break up material before it goes onto the belt) and there is a larger BF7048 Mulch variant.

SM312 Mobile Double Deck is a single-axle mobile 12X4 ft (3m x 1.29m) Double Deck Screen complete with double drive pump to suit auxiliary, extended folding fines conveyors and incorporates a CAT 2.2 37kw engine and removable towbar.

Earlier this year Barford successfully entered the US market, launching the SR-124 and the S-104, two new track mounted screener, to meet local demand.

Both were previewed at the Spring Sale in Kissimmee, Florida in February coordinated by top auctioneers Yoder & Frey and

34

proved to be the perfect event to develop brand awareness amongst prospective distributor representatives and buyers. As a direct result it has signed up a number of Barford Equipment distributers and the objective is to have one in each US state.

Further afield several new distributors have also been signed up in in Australia to cover both Perth and Sydney.

The European network is also undergoing expansion with new distributors being signed up in several of the key EU markets but others are still being actively sort particularly those with direct mining, aggregate, recycling and construction sector knowledge and experience.

THE 2ND ANNUAL

British

DEMOLITION Awards 19TH JULY 2019

#demoawards2

MANCHESTER

Chambers Media would be delighted to confirm your attendance

T: 01903 899942

E: demoawards@chambers.media

www.britishdemolitionawards.com SPONSORED BY

DIGGERS & DOZERS

JCB Generate Rapid Growth Mather + Stuart Power Solutions, the power generation division of leading equipment rental firm A-Plant, has placed an order with Greenshields JCB for124 rental specification generators, to meet the demands of its rapid fleet expansion.

In a deal worth £4.5 million, the company will take JCB G150RS models, the G200RS and the G250RS. The deal also includes the larger G300RS and the G500RS model.

The order is part of an on-going, long-term supply partnership between the two companies, providing a wide range of power outputs in line with Mather + Stuart’s dynamic growth plans.

“Following our acquisition

by A-Plant in 2016, we have experienced a period of rapid growth, opening nine new service centres and tripling the size of our fleet from 650 generators in

January 2016, to over 2,000 in August 2018,” says Gary Orton, Director of Mather + Stuart.

larger rental outputs, provides us with the ideal solution to fit many of our customer requirements.”

“To support our expansion plans and keep up with customer demand, it is vital that we continually update our fleet. JCB’s extensive range, including the

All of the generators are from JCB Power Products’ rental-specific RS series. They are powered by efficient, reliable Stage IIIA diesel engines and equipped

36

MULTIPLE TRACK WIDTHS AND TREAD PATTERNS CONTROL CHOICES: T BAR, PILOT JOYSTICK, HAND/FOOT AND PILOT DUAL-HAND

MEET THE NEW

COMPACT TRACKED LOADER

TAKING PERFORMANCE TO THE NEXT LEVEL

Please visit www.gehl.com for your nearest stockist

IDEALTRAX™ AUTOMATIC TRACK TENSIONING HIGH-FLOW AUXILIARY HYDRAULICS AVAILABLE 748KG OPERATING CAPACITY 52.1KW YANMAR ENGINE 3038MM HEIGHT TO HINGE PIN

DIGGERS & DOZERS

with bund alarms and DSE 8610 synchronising control panels.

All of the RS series generators come as standard with the JCB LiveLink for Power telematics system, providing a total fleet management solution for the rental company. The system monitors fuel use, operating times, coolant temperatures, light loading, phase imbalance and many other operating parameters, allowing fleet and depot managers to maximise utilisation and availability.

“This marks our third year of supplying generators to Mather + Stuart, who have gone from strength to strength,” says Tom Greenshields, of Greenshields JCB. “We are happy to be part of their plans to bring innovative solutions to the power hire market.”

The deal is part of an on-going relationship between JCB and A-Plant, which ordered more than £55 million of machinery from the manufacturer last year.

Indeed, over the past three years, the hire giant has placed more than £140 million of orders with JCB.

38

“Customers tell us that their number one priority is reliability, closely followed by availability and quality, so it is vital that we continue to meet these key requirements,” says A-Plant Marketing Director Asif Latief.

Super Mass Excavation and Fuel Efficient Loading

Liebherr excavators are designed and built from the ground up specifically for tough quarrying operations.

The Super Mass Excavation range features the undercarriage from the next size up machine as well as a host of other heavy-duty robust components to ensure reliability, efficiency and productivity.

The XPower wheel loaders provide maximum efficiency in all applications due to automatic adjustment between mechanical and hydrostatic driveline. Significant fuel savings are achieved thanks to Liebherr XPower driveline with Liebherr-Power-Efficiency (LPE). Optimal cab and engine hood design provides exceptional all-round visibility for safe and comfortable operation.

Call today on: 01767 602100 Liebherr-Great Britain Limited, Normandy Lane, Stratton Business Park, Biggleswade, Bedfordshire, SG18 8QB. www.liebherr.com

DIGGERS & DOZERS

Boels New Depot Hire company Boels Rental opened a new depot in Hereford on 1 November 2018.

The company already had a branch in Hereford, but thanks to continuous growth the location on Harrow Road soon became too cramped.

As of today, Boels Rental will serve its customers from the convenient and easily accessible location at Mortimer Trade Park.

“This new depot, which is located close to many builders merchants and DIY stores, has a training facility in which we can offer our customers various courses in safety, such as IPAF and PASMA,” says Gary

40

Willis, depot manager of the new location. “The new location is strictly designed to offer our customers the most pleasant experience possible, which of course starts with available parking space. Furthermore, the product range will be expanded with larger access equipment, as well as mini excavators, compressors and more, so we can serve our customers even better.”

WEAR TO REPAIR? SPECIALISTS IN:

GRAB REFURBISHMENT COMPONENT MANUFACTURE PLANT REFURBISHMENT & REPAIR LINE BORING WELDING & FABRICATION

TELEPHONE

01206 272 796

SC HOOL ROA D



L A NGH A M



C OLC HE S T E R



E S SE X



CO4 5PB

www.portable-machining.co.uk

WE REFURBISH:

KING POSTS RAMS & BUCKETS DIPPER ARMS BOOMS EQUALISER BEAMS CENTRE HITCH’S DOG BONES SPROCKETS SIDE ARMS QUICK HITCHES Z BARS

DIGGERS & DOZERS

CAT on the side Cat Side Discharge Buckets—designed for use with skid steer loaders, multi-terrain loaders, compact track loaders, and compact wheel loaders—collect and transport loose materials such as sawdust, sand, mulch, and topsoil and then discharge these materials via a belt-type conveyor from adjustable openings (doors) on either side of the bucket.

42

DIGGERS & DOZERS

A rotating agitator works to keep material flowing to the conveyor.

Adjusting conveyor speed and door openings controls the volume of material discharged and the area covered. Features of the Cat Side Discharge Bucket suit this attachment for varied application, including agriculture, construction, landscaping, road maintenance, and material handling.

The rubber conveyor belt—featuring a heavy duty, raised chevron tread design and equipped with an adjustable tensioning device—is engineered for long-term durability and functions efficiently whether discharging material left or right.

Two externally mounted, reversible, hydraulic motors power the conveyor directly, eliminating any intermediate drive mechanisms.

Specially designed openings in the bucket floor allow any material remaining in the bucket to escape, preventing material build-up beneath the conveyor. Side Discharge Buckets designed for consistent use in sand, or other heavier materials, feature an internal baffle to reduce belt strain.

The agitator assembly, directly powered via a third, high-torque hydraulic motor, functions to reduce material bridging in the bucket to ensure consistent material flow to the conveyor. Agitator paddles are available in sand and sawdust configurations, the sand style featuring a straight design that exerts added force to push through dense material, and the sawdust type featuring an aggressive design that uses prongs to assist in breaking up material and reducing weight on the conveyor.

The manually adjustable discharge doors, one on each side of the bucket, regulate the volume of material discharged. The doors are built with thick-plate reinforcing for durability. As an added safety feature for Cat Side Discharge Buckets, a welded, serrated step facilitates entering and exiting the cab.

T: 01327 261810 M: 07831 123657 W: www.baughans.co.uk E: sales@baughans.co.uk

bit.ly/baughansvid

GRAPPLES OF ALL SIZES 18”-39” CONCRETE CRUSHER BUCKETS Manufacturers of barrel screens and recycling plant.

Contact us for more details, demonstrations and prices.

Visit our website for our full product range and secondhand equipment.

WANT TO SELL YOUR NEW & USED PLANT & MACHINERY? www.baughanstrader.com

43

DIGGERS & DOZERS

Liebherr L580 XPower Rugged American lorries for bulk material transportation are pairing up with high-performance Liebherr equipment for the greywacke extraction process.

Based in Germany’s Sauerland region in North RhineWestphalia, quarrying company Günter Jung GmbH operates a very special fleet of machinery, which boasts the L 580 XPower wheel loader as its latest addition.

‘We are glad to have chosen the XPower wheel loader from Liebherr,” says company owner Günter Jung. “It delivers loads of power while being efficient and reliable.”

The L 580 XPower is predominantly used in loadand-carry applications and feeds material into crushers and lorries. An eye-catcher in its own right, the wheel loader turns even more heads when it is loading one of the American lorries.

Günter Jung GmbH specialises in the extraction and processing of greywacke. The quarrying firm produces bulk material of various quality grades for use

44

in industries such as specialpurpose civil engineering. The high-quality quarry stones, irregular paving slabs, decorative stones and rectangular stone blocks are used in both construction and landscaping.

The L 580 XPower wheel loader plays a key role in the extraction and processing of these products in the quarry. It picks up blast material at the quarry face and transports it to the two crusher units. In this process,

DIGGERS & DOZERS

the machine travels a distance of about 100 metres with ease.

With its power-split driveline, the approximately 28 tonne wheel loader has no difficulty in covering this distance, which includes an incline of around 15 metres in length.

“I am completely amazed by the L 580’s XPower driveline.

Our quarry area includes a steep ramp and the machine negotiates it with ease,” says Jung. Since its commissioning in June 2017, the Liebherr L 580 XPower has proved to be ideally suited to load-and-carry applications at Günter Jung GmbH. The rugged Z-bar linkage can exert high breakout forces in the lower region of the lift arm.

This plays a vital role in picking

up blast greywacke using the 6.0 m3 rock bucket efficiently.

During material transportation, the power-split driveline ensures a smooth ride and a high level of performance by automatically adapting to the current driving situation. As a result, the L 580 XPower contributes to boosting the quarry’s productivity.

“The new Liebherr wheel loader allows us to handle 1,500 tonnes of greywacke on a daily basis. At the same time, its average diesel consumption of 12 litres per hour of operation is impressively low and helps us reduce our operating costs,” says Jung.

For the Sauerland-based quarrying company, moderate fuel consumption figures coupled

with high levels of material handling performance were the main reasons for purchasing the L 580 XPower. Determined to find the best possible solution, Günter Jung meticulously tested several machine models from various manufacturers.

“In direct comparison with other makes, it was the L 580 XPower

by Liebherr that convinced me the most. The wheel loader is sturdily built and has a comfortable cab,” says Jung.

He also values the close cooperation with Dortmundbased Liebherr-Baumaschinen Vertriebs- und Service GmbH, which has established itself as a reliable partner that provides invaluable support.

01527 893343 www.sedavis.co.uk

“first choice for landscaping supplies!”

Self Drive Plant

Aggregate Washing Systems

SE Davis & Son can offer much of its extensive fleet on ‘Self Drive’ hire to its customers in the quarrying and construction industries.

•

Small working footprint

•

Quick set up time

These items include: • Loading Shovels - 1.5m to 5m capacity • Tracked Screeners - 3 & 4 way up to 20’ x 5’ screen decks • 360 Excavators - 12 tonnes to 50 tonnes • Dump Trucks - 12 tonnes to 40 tonnes capacity • Crushers - Tracked Jaw, Cone, Impactor • Bulldozers - Including LGP & PAT Blades & Laser guidance

•

Fully re-circulating Water Systems through our centrifuges

•

Capable of processing up to 130T per hour

•

Mobile & static plants available

•

Aggregate washing sytems to suit your requirements

•

Tracked washed plants now available.

Sandhills Farm, Edgioake Lane, Astwood Bank, WORCS, B96 6BG

45

DIGGERS & DOZERS

JCB Through and Through Coventry-based Tom White Waste (TWW) has added a further four JCB machines to the range of materials handling equipment (MHE) in operation at its recycling centre in Coventry.

The new additions mean that TWW’s MHE fleet is now comprised entirely of JCB equipment.

The latest order is made up of three JS20MH wheeled material handlers and a 560-80WM

Loadall – the most powerful unit in the JCB telehandler range.

Long-established JCB dealer, Gunn JCB, has supplied TWW’s new equipment and the company is also responsible for the ongoing service and maintenance of the TWW MHE fleet.

In all, Tom White Waste – which celebrates its 30th anniversary in October this year – operates over 20 JCB models at its Coventry site.

The fleet of specialist handling machines includes seven loading shovels, two telehandlers, two Teletruks and two telescopic handlers. Every model has been designed to deliver optimum performance in the most challenging environments.

TWW recycles over 125,000 tonnes of mixed general and commercial waste at the Coventry facility and, typically, some 30 lorries are loaded each day.

“We are increasingly able to help our trade waste customers achieve complete diversion from landfill and the JCB equipment plays a vital role in the efficiency of our on-site processes,” says Ian White, Managing Director of Tom White Waste.

“Historically TWW has used other MHE brands but with these latest purchases our fleet is now 100% JCB – which is a significant milestone for our business and reflects our total satisfaction with the performance of the JCB range.”

46

HYDRAULIC HAMMERS

MADE IN GREAT BRITAIN

POWERFULLY SIMPLE,

SIMPLY POWERFUL

DIGGERS & DOZERS

Mining company Banks on Miller Performance studies have shown that repair and refurbishment can increase the life of heavy plant equipment for around 60% of the cost of a new replacement.

The decision to repair rather than replace heavy plant equipment is a preference made by most businesses in the industry and this is no exception for Banks Mining at its Shotton Surface Mine.

Part of the County Durhamheadquartered Banks Group, Banks Mining has been developing, operating and restoring surface coal mines in a modern, safe, responsible and efficient way throughout the north of England and Scotland to the highest possible standards for more than four decades.

Banks Mining have been extracting coal at Shotton since 2008 and currently mines around one million tonnes of coal per year. With a daily output of up to 190 coal wagons, the Shotton site is operating at maximum capacity. Maintaining the high output levels requires an extensive and well planned maintenance schedule particularly for the mine’s fleet of dump trucks and 14 CAT 785 skips, which are used to move overburden in the mine.

Over time the skip is exposed to heavy wear and tear and to extend the lifespan of their fleet

48

Banks Mining have initiated a refurbishment programme.

The first stage of the fleet refurbishment programme was to complete a full overhaul of a 150t CAT 785 skip. This task fell to local mining and construction attachment specialist Miller UK, who have over forty years of experience in the mining repairs sector. Miller UK’s dedicated repair centre, headed up by Conor Thompson have developed a bespoke overhaul programme specifically for Banks Mining which included a comprehensive full dumper body

DIGGERS & DOZERS

inspection and a scheduled overhaul timeframe in only eight weeks.

“This was a big job with lots of challenges and we have used all of our expertise to carry out a full overhaul of the skip to meet the specific site requirements for Banks. The body design has been optimised for maximising wear ability, strength and reliability over the lifetime of the skip,” says Miller’s Specialist Products Division Manager, Conor Thompson.

“Our customers count on our dependability and expertise and we take great pride in delivering on our commitments.”

During the eight week refurbishment the CAT 785 skip overhaul included a full internal

reline, new external panels, canopy, duck tail and undersides manufactured with high strength steel and lined with Hardox. In addition to the replacement of key structural points of the body, there was severe cracking on most underside bolsters which were gouged out and re-welded before the skip was fully painted.

Upon completion, the newly installed lifting points where fully checked and certified before the skip was lifted by two 60t cranes provided by Mammoet onto a low loader provided by Hubbway Hire and escorted back to the coal mine in Northumberland.

Thanks to Miller, Banks Mining was able to reduce machine downtime and get the 150t machine promptly back into action.

49

“This was a large and complex repair and it made sense for us to use Miller’s expertise for this project. They offered us a free onsite inspection as well as an impressively quick turnaround, which has helped us to reduce our downtime”, says Andrew Palmer, plant supervisor at Banks Mining.

“Miller offers a fantastic repair service and boasts a wide skillset, while it’s also a positive for us that they are a fellow north east company, as working with them ties in with our policy of investing in the local supply chain wherever possible’. We have been so happy with the job that they have done, we got a second CAT 785 skip collected

by Miller and work has begun for another full overhaul.”

DIGGERS & DOZERS

Michael Henry Chooses Volvo Ickenham based plant hire and civil engineering contractor has opted for a new Volvo EC220E to coincide with a move to raise its profile in the Greater London plant hire market and expand its client portfolio.

Michael Henry Civil Engineering is no stranger to owning and operating Volvo branded equipment, already running an EC220D in its mixed fleet of equipment.

“We were in the market to add another twenty-tonne machine to the fleet and our decision to purchase the new Volvo coincided with an EC220E available together with an attractive package,” says Managing Director Michael Henry. “The Volvo excavator has a good reputation for reliability and performance along with a good residual value so we had no problem in opting for the new EC220E” Powered by a six-cylinder Volvo engine, developing 174

nett hp, the EC220E offers the latest in engine technology and operating sophistication. For example, pump flow is controlled for combined digging and swinging operations to reduce flow loss through the overload relief valves, whilst maintaining digging power and maximum swing torque. When Eco-mode is selected the machine provides better fuel efficiency without loss of performance in most operating conditions.

The Volvo Care Cab offers a large roomy interior with plenty of leg room and foot space. The excellent all round visibility is enhanced by pressurised and filtered cab air supplied by a 14-vent, climate-control system.

An adjustable, easy-t- read LCD colour monitor provides real time information of the machine functions.

The new EC220E is supported by a Volvo Blue service agreement and has been supplied in standard specification which includes hose rupture valves to both boom and dipper cylinders, quick-fit hydraulics and hammer / shear hydraulic lines. The combination of the 5.7m boom and 2.9m dipper arm affords the machine a maximum digging reach of 9.93 metres and a dig depth of 6.73 metres. The practical dumping height is a generous 6.55 metres and the machine’s maximum lifting capacity across carriage at full reach, is an impressive 2.8 tonnes. The machine also sports full ‘boxing ring’ style guarding around the superstructure.

50

DIGGERS & DOZERS

Duo Group has a new “Seoul” Mate Duo Group Holdings Ltd has set up a new division in the group, branded as Seoul Ltd, Seoul will offer sales, rental, contract hire and aftersales support for Doosan construction equipment, including large excavators, articulated dump trucks and wheel loaders for UK national key account customers in waste, recycling, quarrying and mining industries.

Seoul Ltd will operate from a 6-acre site based at Meriden near the National Exhibition Centre, Birmingham, the site is due to open mid-2019. The new premises will provide a state-ofthe art 1080m² workshop with 6 bays, new and used machine stock and a large parts dept.

Supporting the business will be a

highly skilled team of engineers covering the whole of the UK including Scotland.

Seoul will provide a dedicated product support team stocking a wide variety of parts but also with the added option on most parts of next day delivery. Seoul’s customers will benefit from a salesforce with over 75 years combined industry experience providing tailored solutions to meet the varying customer requirements.

Seoul Ltd are working alongside Doosan, one of the world’s leading construction and quarrying equipment manufacturers, offering a comprehensive range of products including crawler and wheeled excavators from 13 – 52

52

tonnes, wheeled loaders from 1.9 – 6.4m³ and 30 and 40 tonne articulated dump trucks.

Not only can Seoul Ltd. supply Doosan products but being part of Duo Group Holdings Ltd, Seoul can offer customers value solutions and an enhanced service for machinery supply and the best possible aftersales support through Duo Group workshops, depots and offices across the UK including Scotland.

Seoul Ltd aim to provide worldclass product support for all capital equipment around the UK. For more information on Seoul Ltd. or any enquiries please contact Jason.purllant@duoplc. com / 07733 110106 or visit www.duoplc.com/seoul

osan Seoul, a Do equipment n o ti c u tr s con National K U to r e id prov s, ffering sale Accounts, o nd tract hire a n o c l, ta n e r upport. aftersales s

n tructio s n o c n Doosa ehensive r o f r e r provid ing a comp awler and a , l u Seo t, offer ncluding cr tonnes, n e m i 2 equip oducts from 13 – 5 3 and r p f o range vators 1.9 – 6.4m a c m x e ed aximu from m s r h wheel e t i d cks w ed loa wheel ed dump tru tonnes. lat and 40 articu 0 3 f o ds payloa

OUL E S / M C.CO L P O U WW.D

86

|

23 2 2 2 0845

W

MAKING OUR MARK ON THE CONSTRUCTION INDUSTRY

ONE STEP AT A TIME

DIGGERS & DOZERS

NOX tiltrotators: Work smarter, faster and more profitably Anyone who has worked with a standard tiltrotator will be well aware of the benefits they bring. The addition of a tiltrotator turns your excavator into a more flexible and agile machine, making it possible to complete jobs in less time, using less labour, and with more precision and control, leading to productivity gains across the board.

German attachment experts Kinshofer have taken these benefits a notch further with their cylinderless NOX tiltrotator – developing one of the most advanced tools on the excavator market. Featuring the market’s largest tilting angle of 50° on both sides and endless 360°

rotation, the NOX provides even greater mobility and flexibility and has quickly become recognised as a tool that offers unique benefits to machine operators.

Forestry work, excavating narrow trenches and working around existing infrastructure are just some of the areas where conventional ram-based technology can be problematic.

Protruding elements can be vulnerable to snagging or other damage – which is where the NOX really comes into its own.

The substantial tilt offered by the NOX is generated not through cylinders but via an elliptic rotary actuator, delivering constant torque through the entire tilting angle. Unlike ram based alternatives, there is no drop-off in power across the tilt angle, resulting in a significant overall performance benefit.

The endless rotation is provided through an extremely durable worm drive, immersed in an oilbath to enhance the unit’s lowmaintenance properties, with minimal wear parts, only two lubrication points and bearing bushes. The extremely compact and robust cast housing of the NOX protects the integrated hydraulics and can withstand the toughest of working environments.

54

Mates in Mind Let’s start the conversation...

Mates in Mind is working to raise awareness and improve mental health in the construction industry.

Be part of the action.

Become a Supporter of Mates in Mind today. matesinmind.org support@matesinmind.org T 020 3510 5018

DIGGERS & DOZERS

Safety, productivity and costeffectiveness all stand to benefit from elements such as the twin D-Lock hitch and the fully hydraulic OilQuick quick-coupler system, which allows the NOX and hydraulically operated attachments to be changed within seconds. Operators can carry out a variety of tasks in a shorter timespan, quickly changing attachments from the cab, in a safer working environment.

Enabling effectiveness Combined with a range of quick couplers and additional attachment options, the NOX is suitable for excavators with an operating weight from three to 25 tonnes and is bringing improved efficiency results across many UK construction sites.

Adding a set of fork tines to a NOX allows you to convert your excavator into a forklift within seconds. The NOX can also be combined with a wide range of grabs and buckets. Universal bucket designs with a double conical shape are a perfect partner for the NOX, whether you’re carrying out embankment work, trenching or grading.

Another clever addition to the NOX range is the TR Gripper tool, which can be cassette-mounted between a bucket or grading beam for example, allowing

56

precision handling of poles and curb stones.

The proportional NOXPROP dual joy-stick control system is an option that provides greater control, precision, safety and comfort for the operator. It’s relatively quick and easy to install, with controls that can be easily adjusted via bespoke software to create an intuitive and effective control system.

Multiple user-profile settings for individual operators can be set, stored and managed through a separate display screen.

The NOX range also offers an optional electrical lead-through for quick couplers in accordance with the latest safety standards - and is ‘ready’ for 2D/3D excavator guidance systems.

The development doesn’t stop there. Kinshofer is continuing to work with the industry’s latest technological developments to ensure the NOX stays at the forefront of maximising carrier machine effectiveness.

NOX TILTROTATOR range

TIlt the advantage in your direction Increase your productivity by fitting a tiltrotator to your excavator and you’ll never look back. Experience reduced labour on jobs, quicker completion time, less movement of your machine on-site, greater control and more precise handling.

And the innovations behind the NOX Tiltrotator range mean you can enjoy even more advantages. No cylinders to get caught or damaged working in confined spaces, a big 50° tilting angle on both sides and continuous 360° rotation make it a highly efficient addition to any construction site.

Suitable for excavators with an operating weight from 3 to 25 tonnes.

Save time, save money and tilt competitive advantage firmly in your direction.

nox+ Compact design Trenching, forestry and working in confined spaces is made easier and more profitable without cylinders

nox+ Powerful operation Elliptic Rotary Actuator delivers smooth, constant torque through the entire tilting angle with no drop off in power

nox+ Durable construction Robust build quality and an oilimmersed rotation unit maximises output and lowers maintenance

nox+ Increased versatility Large range of attachment options available for greater productivity and maximum cost-effectiveness

nox+ Smart control system NOX Prop smooth, fully-proportional controls reduce operator fatigue and offer multi-user profiling

Global expertise, local know-how Call us today to locate your nearest dealer and find out how we can benefit your business Kinshofer UK 4 Milton Industrial Court, Horsfield Way, Bredbury, Stockport, Cheshire, SK6 2TA

Join the conversation @KinshoferUK

0161 406 7046 sales-uk@kinshofer.com kinshofer.com

DIGGERS & DOZERS

Doocey Group invest in Anaconda DF410 with Red Knight 6 Ltd Doocey Group Ltd, a multidisciplined groundworks, civil engineering and utility contractor have purchased the Anaconda DF410 Scalper Screen from Red Knight 6 Ltd (RK6), the appointed dealer for Anaconda in the UK. Doocey Group, an independent, family run business, operating nationally, enjoyed a successful trial period with the DF410 before opting to purchase. A recent increase in business has not only seen Doocey Group increase their number of sites,

but also meant a review of the machines they have in their recycling fleet.

with the output” said Chris Gilbert, recycling manager with the Doocey Group.

“The ongoing success of our business has meant we required a bigger screener to run alongside the RUBBLE MASTER RM80 that we have on site. By opting for the Anaconda DF410 we can process more material and more efficiently at our recycling yard in Dudley. The machine is well built, capable of a much higher output than our existing model. We are delighted

“We were asked to recommend a 3-way split screener to supplement the current processing taking place and a trial of the DF410 was the easy choice to make as it works so well alongside the RM80 crusher.

This approach will improve topsoil yields and reduces the quantity of stone to be crushed,” said Liam Wallace, area sales manager for RK6.

Red Knight 6 Ltd is an innovative business supplying the quarry and recycling industries with the sales, service, spare parts and hire of crushing, screening and recycling equipment. As the appointed dealers for Anaconda Equipment International, RUBBLE MASTER and Komplet Recycling Systems, RK6 are experienced in delivering pride in their products and excellence in their customer service.

58

Training is essential to staying cutting edge in the concrete and masonry industries. WOC’s world-class educational program offers everything you need: more than 100 Hands-on Training sessions, Interactive Workshops and targeted seminars that address the constantly evolving technology. When you earn Master Certificates and complete skill-building certifications, there’s no stopping increased profit, production and opportunity.

JANUARY 22-25, 2019 • SEMINARS: JANUARY 21-25 LAS VEGAS CONVENTION CENTER • LAS VEGAS, NV, USA

REGISTER AT www.worldofconcrete.com

A selected participant in the International Buyer Program

G8