Introduction of carbon fiber composite | CFC | C/C

BEIJING CFCCARBON CO., LTD

CFC PRODUCTS INTRODUCTION

The CFC products developed by our company have been widely used in all fields such as semi-conductor industry, metallurgy, chemical industry, etc. CFC products can be categorized as follows:

Hotzone parts for polysilicon hydrogenated furnaces and monocrystalline silicon growth furnaces (liner bushing, lining panel, heater, in-ex insulation barrel, crucible)

Thermostable material (bearing, liner plate)

Hot-pressed mould

Thermostable mechanical fixing (all sizes of screws, bolts, nuts, gaskets)

Plates and section materials (high temperature furnace inner, fritting furnace strips, charging components, lattice support, plate heater, and other processing components)

BEIJING CFCCARBON CO., LTD

Properties Items Size/ m Bulk density(g/ cm³) Compressive Strength(MPa) Bending Strength(MPa) thermal conductivity (W/m.k) thermal expansion (CTE)* 10 -6K （300-1300K） Specific electrical resistance (μΩm) Ash Contents (PPM) 4D C/C Disc OD500/ID90*L250 1.85 X-Y: ≥160Mpa Z:: ≥220Mpa X-Y: ≥ 120Mpa X-Y: ≥40 W/mk Z: ≥ 20W/mk 900°C X-Y:0.5-1 ×10-6/K Z: 1-1.5 ×10-6/K Heater Φ1.0, 1.6, 1.8, 2.0, U-shaped and other specifics 1.4-1.6 ≥100 ≥80 / ≤2 20-35 ≤50 CFC Heat Preservation barrel Φ1.0, 1.5, 1.8, max 2.3 1.1-1.3 ≥80 ≥70 ≤6 ≤3 / ≤50 Special felt Heat Preservation barrel Φ1.0, 1.5, 1.8, max 2.3 0.4-0.6 ≥50 ≥15 ≤1.3 ≤3 / ≤50 Solidified Heat Preservationfelt Φ1.0, 1.5, 1.8, max 2.3 0.25-0.4 / / ≤0.6 ≤4.5 / / Crucible All sizes 1.6-1.8 ≥120 ≥80 / ≤1.6 / ≤50 Bolt and nut M12, M16 single and double studs 1.6-1.8 ≥120 ≥80 / ≤1.6 / ≤50 Hot-pressed mould Φ340-610 1.7-1.8 ≥120 ≥80 / ≤1.6 / /

PHOTOES

BEIJING CFCCARBON CO., LTD

U-shaped heaters special heaters heaters

Inner cover(CFC) outer cover(CFC) in/out heat-insulated (CFC)

Heat Preservation barrel (Special felt)

heat-insulated inner(CFC)

Racing car brake pad/disc foam graphite FOAM GRAPHITE

Special components

U-shape, L-shape products

high temperature mould Crucible

kinds of fixings

CFC lining panel pantograph 4D C/C disc Airplane dis/pad 3D tube 4D rod/tube

Turn static files into dynamic content formats.

Create a flipbook