SỞ KHOA HỌC VÀ CÔNG NGHỆ TP.HCM
TRUNG TÂM THÔNG TIN KHOA HỌC VÀ CÔNG NGHỆ
Liên hệ: Phòng
Thông tin
ĐC: 79 Trương Định, Quận 1, TP.HCM ĐT: 38243826 - 38297040 (203-202-102) - Fax: 38291957 Website: www.cesti.gov.vn - Email: cungcapthongtin@cesti.gov.vn
Tháng10 /2012
TIÊU CHUẨN MỚI THÁNG 10/2012 Trong tháng 10/2012, Trung tâm Thông tin Khoa học và Công nghệ xin gởi đến Quý vị Danh mục các Tiêu chuẩn mới sau: Tên tiêu chuẩn
TT Số hiệu tiêu chuẩn
A4
TIÊU CHUẨN VIỆT NAM 1 QCVN 01Quy chuẩn kỹ thuật quốc gia về khảo nghiệm, kiểm 103:2012/BNNPTNT định thức ăn chăn nuôi gà. 2 QCVN 01Quy chuẩn kỹ thuật quốc gia về khảo nghiệm, kiểm 102:2012/BNNPTNT định đà điểu giống. 3 QCVN 01Quy chuẩn kỹ thuật quốc gia về khảo nghiệm kiểm định
9 8 9
101:2012/BNNPTNT ong mật giống. 4
QCVN 01Quy chuẩn kỹ thuật quốc gia về khảo nghiệm, kiểm 104:2012/BNNPTNT định thức ăn chăn nuôi lợn.
10
5
TCVN 7487:2005
Nhiên liệu tuốc bin hàng không. Phương pháp xác định độ ổn định ôxy hóa nhiệt.
31
6
QCVN 42:2012/BGTVT
Quy chuẩn kỹ thuật quốc gia về trang bị an toàn tàu biển.
236
TIÊU CHUẨN ISO 1 ISO/IEC 40500:2012 Information technology - W3C Web Content Accessibility Guidelines (WCAG) 2.0. 2 ISO 18738-2:2012 Measurement of ride quality - Part 2: Escalators and 3
ISO 25745-1:2012
4
ISO 39001:2012
5
ISO 7176-28:2012
BM09-BTTC-TG
LBH:02
moving walks. Energy performance of lifts, escalators and moving walks - Part 1: Energy measurement and verification. Road traffic safety (RTS) management systems Requirements with guidance for use. Wheelchairs - Part 28: Requirements and test methods LSĐ:00
Ngày BH: 15/10/2012
2 16 15 37 99
Trang 1/8
TT Số hiệu tiêu chuẩn
6
Replace: SO 717623:2002; ISO 717624:2004 ISO 12492:2012
7
ISO 13175-3:2012
8
11
ISO 7148-2:2012 Replace: ISO 71482:1999 ISO 18738-1:2012 Replace: ISO 18738:2003 ISO 4164:2012 Replace: ISO 4164:1978 ISO 16145-2:2012
12
ISO 16145-1:2012
13
ISO 16145-3:2012
14
9
10
Tên tiêu chuẩn
A4
for stair-climbing devices.
Rubber, raw - Determination of water content by Karl Fischer method. Implants for surgery - Calcium phosphates - Part 3: Hydroxyapatite and beta-tricalcium phosphate bone substitutes. Plain bearings - Testing of the tribological behaviour of bearing materials - Part 2: Testing of polymer-based bearing materials. Measurement of ride quality - Part 1: Lifts (elevators).
7 13
25
18
Mopeds - Engine test code - Net power.
19
Ships and marine technology - Protective coatings and inspection method - Part 2: Void spaces of bulk carriers and oil tankers. Ships and marine technology - Protective coatings and inspection method - Part 1: Dedicated sea water ballast tanks. Ships and marine technology - Protective coatings and inspection method - Part 3: Cargo oil tanks of crude oil tankers.
38
Road vehicles - Ergonomic requirements for the driver's workplace in line-service buses - Part 1: General description, basic requirements. Plastics pipes and fittings - Equipment for fusion jointing polyethylene systems - Part 1: Butt fusion.
14
Laboratory glassware - Filter flasks.
9
17
ISO 16121-1:2012 Replace: ISO 161211:2005 ISO 12176-1:2012 Replace: ISO 121761:2006 ISO 6556:2012 Replace: ISO 6556:1981 ISO/TS 16479:2012
Thermoplastics pipes for the conveyance of fluids Determination of the slow cracking resistance of pipes and fittings using the Notched Ring Test (NRT).
21
18
ISO 9334:2012
Optics and photonics - Optical transfer function -
34
15
16
Dịch vụ Cung cấp Thông tin Trọn gói
Tháng 10/2012
40
40
20
2/8
TT Số hiệu tiêu chuẩn
Tên tiêu chuẩn
Replace: ISO 9334:2007
Definitions and mathematical relationships.
19
ISO/TS 182348:2012
20
21
ISO 13297:2012 Replace: ISO 13297:2000 ISO/TR 11225:2012
Intelligent transport systems - Traffic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format - Part 8: Congestion and Travel Time application (TPEG1-CTT). Small craft - Electrical systems - Alternating current installations.
22
ISO/TS 19158:2012
23
ISO 3676:2012 Replace: ISO 3676:1983 IEC/TS 62622:2012
24
A4
20
27
Space environment (natural and artificial) - Guide to 107 reference and standard atmosphere models. Geographic information - Quality assurance of data 22 supply. Packaging - Complete, filled transport packages and 5 unit loads - Unit load dimensions. Artificial gratings used in nanotechnology - Description and measurement of dimensional quality parameters. Safety of machinery - Safety-related parts of control systems - Part 2: Validation.
34
25
ISO 13849-2:2012 Replace: ISO 138492:2003
26
ISO 12575-1:2012
Thermal insulation products - Exterior insulating systems for foundations - Part 1: Material specification.
11
27
ISO 14188:2012
Metallic and other inorganic coatings - Test methods for measuring thermal cycle resistance and thermal shock resistance for thermal barrier coatings.
15
28
ISO 12013-1:2012
Paints and varnishes - Determination of curing
10
79
characteristics using a free damped oscillation method Part 1: Start temperature of the curing reaction. 29
ISO 12013-2:2012
30
ISO/TR 16344:2012
31
ISO 16548:2012
32
ISO/TR 173212:2012
Paints and varnishes - Determination of curing characteristics using a free damped oscillation method Part 2: Glass transition temperature. Energy performance of buildings - Common terms, definitions and symbols for the overall energy performance rating and certification. Ships and marine technology - Ship design - General guidance on emergency towing procedures. Graphic technology and photography - Colour characterization of digital still cameras (DSCs) - Part 2:
Dịch vụ Cung cấp Thông tin Trọn gói
Tháng 10/2012
10
40
32 18
3/8
TT Số hiệu tiêu chuẩn
Tên tiêu chuẩn Considerations transforms.
for
determining
A4 scene
analysis
33
ISO/IEC 103736:2011/Amd 2:2012
Test methods for electromagnetic disturbance.
14
34
ISO 17467-3:2012 Replace: ISO 154393:2007
Plastics piping systems for the supply of gaseous fuels Unplasticized polyamide (PA-U) piping systems jointed by solvent cement - Part 3: Fittings.
6
35
ISO 17467-1:2012 Replace: ISO 154391:2007
Plastics piping systems for the supply of gaseous fuels Unplasticized polyamide (PA-U) piping systems jointed by solvent cement - Part 1: General.
23
Rubber – Vocabulary.
118
Amendment 19 – Mechanical standardization of semiconductor devices - Part 2: Dimensions.
41 21
36
ISO 1382:2012 Replace: ISO 1382:2008 TIÊU CHUẨN IEC 1 IEC 60191-2am19 ed1.0 2
IEC 60364-5-55am1 ed2.0
Amendment 1 - Electrical installations of buildings Part 5-55: Selection and erection of electrical equipment - Other equipment.
3
IEC 60601-224 ed2.0
Medical electrical equipment - Part 2-24: Particular 123 requirements for the basic safety and essential performance of infusion pumps and controllers.
4
IEC 60601-266 ed1.0
86
5
IEC 60688 ed3.0
Medical electrical equipment - Part 2-66: Particular requirements for the basic safety and essential performance of hearing instruments and hearing instrument systems. Electrical measuring transducers for converting A.C. and D.C. electrical quantities to analogue or digital signals.
6
IEC 60893-3-4 ed2.1 Consol. with am1
29
7
IEC 60893-3-4am1 ed2.0
Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 3-4: Specifications for individual materials Requirements for rigid laminated sheets based on phenolic resins. Amendment 1 - Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-4: Specifications for individual materials - Requirements for rigid laminated
Dịch vụ Cung cấp Thông tin Trọn gói
Tháng 10/2012
82
8
4/8
TT Số hiệu tiêu chuẩn
Tên tiêu chuẩn
A4
sheets based on phenolic resins. 8
IEC 61326-21 ed2.0
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications.
16
9
IEC 61326-22 ed2.0
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems.
17
10
IEC 61326-25 ed2.0
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for field devices with field bus interfaces according to IEC 61784-1.
33
11
IEC 61360-2 ed3.0
12
IEC 61753-0912 ed1.0
Standard data element types with associated 355 classification scheme for electric components - Part 2: EXPRESS dictionary schema. Fibre optic interconnecting devices and passive 24
13
IEC 61993-2 ed2.0
14
IEC 62271101 ed2.0 IEC 62276 ed2.0
15
16
IEC 62282-6100 ed1.1 Consol.
components - Performance standard - Part 091-2: Nonconnectorized single-mode fibre optic pigtailed circulators for category C - Controlled environments. Maritime navigation and radiocommunication 129 equipment and systems - Automatic identification systems (AIS) - Part 2: Class A shipborne equipment of the automatic identification system (AIS) - Operational and performance requirements, methods of test and required test results. High-voltage switchgear and controlgear - Part 101: 332 Synthetic testing. Single crystal wafers for surface acoustic wave (SAW) 82 device applications - Specifications and measuring methods. Fuel cell technologies - Part 6-100: Micro fuel cell 386 power systems – Safety.
Dịch vụ Cung cấp Thông tin Trọn gói
Tháng 10/2012
5/8
TT Số hiệu tiêu chuẩn 17 18
with am1 IEC 62282-6-100am1 ed1.0 IEC/TR 6235110 ed1.0
19
IEC 62358 ed2.0
20
IEC 62551 ed1.0
21
IEC/TS 62622 ed1.0
22
IEC/TR 62635 ed1.0
23
IEC/TS 62644 ed1.0
24
IEC 62674-1 ed1.0
25
ISO/IEC 9995-7am1 ed1.0
26
ISO/IEC 10373-6am2 ed1.0
27
ISO/IEC 116931 ed1.0 ISO/IEC 116941 ed4.0 ISO/IEC/TR 130662 ed1.0
28 29
30
Tên tiêu chuẩn
A4
Amendment 1 - Fuel cell technologies - Part 6-100: 35 Micro fuel cell power systems – Safety. Power systems management and associated information 49 exchange - Data and communications security - Part 10: Security architecture guidelines. Ferrite cores - Standard inductance factor for gapped 36 cores and its tolerance. Analysis techniques for dependability - Petri net 136 techniques. Nanotechnologies - Description, measurement and 40 dimensional quality parameters of artificial gratings. Guidelines for end-of-life information provided by 32 manufacturers and recyclers and for recyclability rate calculation of electrical and electronic equipment . Professional video storage equipment - Guideline of 10 time code transmission. High frequency inductive components - Part 1: Fixed surface mount. inductors for use in electronic and telecommunication equipment Pages: 62. Amendment 1 - Information technology - Keyboard 13 layouts for text and office systems - Part 7: Symbols used to represent functions . Amendment 2 - Identification cards - Test methods - 14 Part 6: Proximity cards - Test methods for electromagnetic disturbance. Identification cards - Optical memory cards - Part 1: 4 General characteristics . Identification cards - Optical memory cards - Linear 2 recording method - Part 1: Physical characteristics. Information technology - Interoperability with Assistive 94 Technology (AT) - Part 2: Windows accessibility application programming interface (API).
ISO/IEC 14651-
Amendment 1 - Information technology - International
am1 ed1.0
string ordering and comparison - Method for comparing
2
character strings and description of the common template tailorable ordering . 31
ISO/IEC
Systems and software engineering - Systems and
25041 ed1.0
software
Dịch vụ Cung cấp Thông tin Trọn gói
Quality
Requirements
and
Tháng 10/2012
52
Evaluation 6/8
TT Số hiệu tiêu chuẩn
Tên tiêu chuẩn
A4
(SQuaRE) - Evaluation guide for developers, acquirers and independent evaluators. 32
ISO/IEC 27013 ed1.0
Information technology - Security techniques Guidance on the integrated implementation of ISO/IEC 27001 and ISO/IEC 20000-1.
38
33
ISO/IEC 27037 ed1.0
Information technology - Security techniques Guidelines for identification, collection, acquisition and preservation of digital evidence.
38
34
ISO/IEC
Information
Content
2
Standard Test Methods for Mechanical Testing of Steel Productsmdash;Metric. Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe.
11
40500 ed1.0 TIÊU CHUẨN ASTM 1 ASTM A1058
technology
-
W3C
Web
Accessibility Guidelines (WCAG) 2.0.
2
ASTM C76
3
ASTM C76M
Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe (Metric).
11
4
ASTM C506
Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe.
7
5
ASTM C506M
7
6
ASTM C507
7
ASTM C507M
8
ASTM C655M
9
ASTM C655
10
ASTM C890
Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe (Metric). Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe. Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe (Metric). Standard Specification for Reinforced Concrete DLoad Culvert, Storm Drain, and Sewer Pipe (Metric). Standard Specification for Reinforced Concrete DLoad Culvert, Storm Drain, and Sewer Pipe. Standard Practice for Minimum Structural Design Loading for Monolithic or Sectional Precast Concrete Water and Wastewater Structures.
11
ASTM C1240
12 13
ASTM D1048 ASTM D1252
Standard Specification for Silica Fume Used in Cementitious Mixtures. Standard Specification for Rubber Insulating Blankets . Standard Test Methods for Chemical Oxygen Demand (Dichromate Oxygen Demand) of Water.
Dịch vụ Cung cấp Thông tin Trọn gói
Tháng 10/2012
11
9 10
6 6 5
7 8 12
7/8
TT Số hiệu tiêu chuẩn 14
ASTM D5790
15
ASTM D5847
16
ASTM D6145
17
ASTM D6146
18
ASTM D6520
19
ASTM D6808
20
ASTM D6874
21
ASTM D6924
22
ASTM D7404
Tên tiêu chuẩn
A4
Standard Test Method for Measurement of Purgeable Organic Compounds inWater by Capillary Column Gas Chromatography/Mass Spectrometry. Standard Practice for Writing Quality Control Specifications for Standard Test Methods for Water Analysis. Standard Guide for Monitoring Sediment in Watersheds. Standard Guide for Monitoring Aqueous Nutrients in Watersheds.
58
Standard Practice for the Solid Phase Micro Extraction (SPME) of Water and its Headspace for the Analysis of Volatile and Semi-Volatile Organic Compounds. Standard Practice for Competency Requirements of Reference Material Producers for Water Analysis. Standard Test Methods for Nondestructive Evaluation of Wood-Based Flexural Members Using Transverse Vibration. Standard Specification for Preformed Thermoplastic Vulcanizate Elastomeric Joint Seals for Bridges. Standard Test Method for Determination of Emulsified Asphalt Residue by Moisture Analyzer.
6
11
10 7
12 8
4 3
LƯU Ý: - Để có toàn văn các tiêu chuẩn trên hoặc các tiêu chuẩn khác, vui lòng liên hệ: Phòng Cung cấp Thông tin - Trung tâm Thông tin Khoa học và Công nghệ. ĐC: 79 Trương Định (Lầu 1), Quận 1, TP. Hồ Chí Minh. ÐT: 08. 38243826 (Trực tiếp) - 38297040 (số nội bộ 202, 203). Fax: 08. 38291957 - Email: cungcapthongtin@cesti.gov.vn - Đối với Tiêu chuẩn mới ban hành: Quý khách tự tr các trung tâm Tiêu chuẩn.
Dịch vụ Cung cấp Thông tin Trọn gói
Tháng 10/2012
8/8