Catalogue Cavel

Q u a l i t y

i n

c o a x i a l

c a b l e s

512-EUROPE

Authenticated Packing

PRELIMINARIES COMPANY PROFILE

Italiana Conduttori Srl has been producing CAVEL coaxial cables since 1968.

During this time the company has achieved continuous growth and major recognition in both the Italian and international markets. The company plant and offices, occupying a surface area of 15,000 sqm, are situated in Gropello Cairoli, in the Province of Pavia, some 30 km along the A7 motorway from Milan en route to Genoa. Each year the company produces over 100,000 km of cable.

CAVEL ON THE WEB

The contents of this presentation are presented and illustrated in more detail in the English version of our website, which you can visit at the following addresses: www.cavel.com www.cavel.it

PRODUCTS PROFILE

The costs of designing and building TV distribution networks necessitate products with better performance integrity and longer life.

CAVEL an EU PRODUCT MADE IN ITALY

To meet these expectations, CAVEL coaxial cables have been designed to comply with new technological demands. More effective screening techniques have been developed and dimensions reduced, while at the same time enhancing mechanical strength and increasing durability. This has been made possible due to the use of nitrogen gas injected physical foam insulation technology, used for the production of coaxial cable dielectrics. Our service to installers has been improved by the introduction of CABLEBOX dispensers, offering environmental and health and safety benefits, as well as a wide range of connectors and tools.

QUALITY IN COAXIAL CABLES

Italiana Conduttori has been producing CAVEL coaxial cables for over 40 years. The safety and reliability of CAVEL products are guaranteed by: the careful selection of suppliers with proven integrity in the supply of quality raw materials; the use of the best scientific equipment for analysis, development, testing and control at all stages of production; the attainment of Quality Accreditation UNI EN ISO 9002, on April 30th 1996, issued by the CSQ Italian national certification body (Certificate No.9125.ICON) and the international certification network IQNet. This certification has since been updated to UNI EN ISO 9001:2008,, obtained on 18.11.2010.

All coaxial cables produced conform to major international specifications such as: EN, IEC, CEI, UTE, BS, DIN and MIL.

CERTIFIED COMPANY UNI EN ISO 9001-2008 CERT. NR. 9125 - ICON

A COMPANY THAT RESPECTS NATURE

CAVEL is compliant with the EU RoHS Directive banning the use of certain hazardous chemical substances. In the past we used lead primarily in PVC sheath compounds as a thermal stabiliser. In accordance with the RoHS Directive, we discontinued the use of lead and its derivatives in all products from March 2005.

In addition, Regulation 1907/2006 covering the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH) came into force on 1 June 2007. Pursuant to the REACH Regulation, our company is categorised as a downstream “user of substances” and as a “producer of articles”. This means that we are not required to register or pre-register the products we use during the production process.

For further information please visit our website and download our Declaration of Conformity to the RoHS Directive, as well as our Declaration in accordance with the REACH Regulation.

CAVEL WARRANTY

In recent decades, the updating of our coaxial cable design, the improved quality of our raw materials and the acquisition of modern production equipment have allowed us to guarantee all coaxial cables produced under the CAVEL brand for a period of 15 years. Both the Certificate and Conditions of Warranty can be downloaded from our website.

2

C O A X IAL C A B L E S

INDEX Class A++ Broadband Coaxials SA > 105 dB .................................

Pages 4-5

SMATV Multicore Coaxials

Video Security Coaxial Cables

.................................

Pages 12-13

.................................

Pages 20-21

Class A/A+ Digital Drop Coaxials SA > 85/95 dB .................................

Pages 6-7

Distribution Coaxials: Underground and Outdoor Installation

Cablebox Environment-Friendly Standard Packing .................................

Pages 22-25

Standard Drop Coaxials SA > 75 dB .................................

Pages 8-9

Radio Frequency Coaxials MIL-C-17 Specs. .................................

Page 18

Tools and Connectors

Security Drop Coaxials LSZH Sheath .................................

Pages 10-11

Hybrid Coaxials for Multimedial Applications .................................

Page 19

Cross Ref. Charts US versus CAVEL cables Legend .................................

Pages 30-31

.................................

Pages 14-17

.................................

Pages 26-29

S IN C E 1 9 6 8

3

CLASS A++ COAXIALS FOR TRIPLE PLAY DIGITAL NETWORKS

Class A++ Broadband Coaxials SA > 105 dB TS61L

RP913B

TS703J

TS11J

TS22/99J

TS27/115J

dia. mm material

1,00 Cu

1,13 Cu

1,13 Cu

1,63 Cu

2,20 Cu

2,70 Cu

material dia. mm

PEG 4,80

PEG 4,80

PEG 4,80

PEG 7,20

PEG 9,90

PEG 11,50

material

APAS

AP

APAS

APAS

APAS

APAS

3. Overlapped Film Foil

material % dia. mm material

CuSn 45 5,32 AP

CuSn 71 5,35 -

CuSn 45 5,37 -

CuSn 63 7,85 -

CuSn 64 10,72 -

CuSn 64 12,32 -

Shorting Fold Film Foil (J)

material

-

-

APJ

APJ

APJ

APJ

dia. mm material

6,60 PVC

6,60 PVC

6,90 PVC

10,30 PE

13,10 PE

15,30 PE

kg/km kg/km

12,6 39,4

19,1 44,4

14,6 44,0

34,9 86,8

61 133

83,3 180,2

mm N

35/70 120

35/70 150

35/70 150

100 300

150 600

200 800

Ohm pF/m %

75±3 54±2 82

75±3 52±2 85

75±3 52±2 85

75±2 52±2 85

75±2 52±2 85

75±2 52±2 85

dB/100m dB/100m dB/100m dB/100m dB/100m dB/100m dB/100m dB/100m dB/100m dB/100m dB/100m dB/100m dB/100m

2,0 2,3 3,5 4,6 8,6 10,8 13,6 18,8 20,4 27,8 31,1 32,4 37,3

1,4 1,9 3,0 4,0 8,1 9,9 12,6 17,3 18,7 25,7 28,8 30,6 34,1

1,6 2,3 3,2 4,1 8,0 9,8 12,5 17,2 18,6 25,2 28,1 29,7 33,7

1,1 1,5 2,2 2,8 5,6 6,9 8,8 11,9 12,8 17,9 19,8 21,0 24,5

0,8 1,1 1,5 2,0 4,0 4,9 6,4 9,1 9,8 13,8 15,5 16,5 18,9

0,8 1,0 1,3 1,7 3,5 4,3 5,5 7,7 8,4 11,5 12,8 13,6 15,4

dB dB dB dB class mΩ/m dB dB dB Ohm/km Ohm/km kV A EN50117

> 30 > 28 > 26 > 22 A++ < 0,9 > 105 > 95 > 85 22,5 / 14 36,5 3 6 2-4

> 30 > 28 > 26 > 22 A++ < 0,9 > 112 > 104 > 91 18 / 10,7 28,7 3 8 2-4

> 30 > 28 > 26 > 22 A++ < 0,9 > 105 > 90 > 80 18 / 14 32 3 8 2-4

> 30 > 28 > 23 > 20 A++ < 0,9 > 105 > 90 > 80 8,5 / 7,5 16 8 16 2-3

> 30 > 28 > 23 > 20 A++ < 0,9 > 115 > 100 > 85 5 / 4,5 9,5 8 21 2-3

> 25 > 24 > 23 > 22 A++ < 0,9 > 115 > 110 > 100 3,4 / 3,5 6,9 8 25 2-3

mode m m mod. item

coil 100 600 S100M DS100

coil 100 600 S100M DS100

reel 100 500 R100M DS100

drum 500 500 PD500 -

drum 500 500 WD500 -

drum 500 500 WD500 -

CAVEL code CONSTRUCTION DATA Inner Conductor Dielectric

Screen 1. Film Foil Laminate 2. Braid Braid Optical Coverage

Outer Sheath PHYSICAL DATA Copper Content Cable Weigth Min. Bending Radius: single/repeated bends Max. Tensile Strength ELECTRICAL DATA Impedance Capacitance Velocity ratio Attenuation (at 20°C) at 5 MHz at 10 MHz at 30 MHz at 50 MHz at 200 MHz at 300 MHz at 470 MHz at 862 MHz at 1000 MHz at 1750 MHz at 2150 MHz at 2400 MHz at 3000 MHz Structural Return Loss (SRL) at 5 - 470 MHz at 470 - 1000 MHz at 1000 - 2000 MHz at 2000 - 3000 MHz Screening Attenuation (SA) at 5 - 30 MHz (TI) at 30 - 1000 MHz at 1000 - 2000 MHz at 2000 - 3000 MHz DC Resistance: inner/outer Loop Resistance Sheath Insulation Voltage Max. Current (Ieff) Specification Conformity Standard Packing Put-up Unit Length Unit Packing Content Packing Pattern (look at page 25) Fits CABLEBOX

The market demand for products offering high screening performance for use in digital broadband communication systems is growing day by day. This is due on the one hand to the increasing number of transmission systems and, on the other hand, to the demand for digital TV programming such as PPV and VOD. Furthermore many operators now offer digital services for internet and digital telephony. Altogether these comprise the so-called Triple Play digital network.

This applies to distribution and reception systems in different fields, including terrestrial, satellite and

cable broadband TV networks.

All such systems require coaxial cables with more efficient screening features, especially in the so-called Return Path frequency range, typically 5 - 85 MHz.

The TS Series includes coaxials provided with the special J-ShortingFold Screen. This is an innovative Triple Shielded screen that affords excellent screening attenuation (SA) along the full frequency bandwidth range 30-3000 MHz. It consists of: 1. An Al/Pet/Al foil film bonded to the dielectric (APAS); 2.One conventional braid of CuSn wires;

3. Another Al/Pet foil film (AP) over the braid, which is folded back over itself on the overlapping section.

The combination of these screening components guarantees the stability of the SA values, which are close to those provided by a real metal tube while keeping the cable’s flexibility within acceptable limits for easy handling during installation.

Pet film Alu foil

We have introduced two series of cables which both offer the highest screening efficiency, Class A++, according to EN50117 specifications.

The RP Series includes Double Shielded coaxials performing the highest possible screening efficiency along Return Path frequencies. This is due to the use of a thicker Al foil film over the dielectric.

Class A++ Broadband Coaxials SA > 105 dB

TS27/115J RP913B

TS61L

J- Shorting Fold Screen

Alu foil Pet film braid of tinned wires Alu foil Pet film bonded Alu foil

physical foam PE PE skin gas injected foam PE copper inner conductor

Tools & Connectors (look at pages 26-29) 4

C O A X IAL C A B L E S

S IN C E 1 9 6 8

5

SA > 85 dB

Class A/A+ Digital Drop Coaxials CW41S

CAVEL code CONSTRUCTION DATA Inner Conductor Dielectric

DG70

DG70C

DG80

DG80C

SA > 95 dB

DG125

QF100BL

RP61B

DG113 DG113C

DG163

SAT752F

dia. mm material material dia. mm

0,41 FeCu PEG 1,90

0,70 Cu PEG 2,90

0,80 Cu PEG 3,50

1,25 Cu PEG 5,30

1,00 Cu PEG 4,75

1,00 Cu PEG 4,80

1,13 Cu PEG 4,80

1,63 Cu PEG 7,20

1,13 Cu PEG 4,80

material

APAS

APA

APA

APA

Cu/Pet

APS

APA

APAS

Cu/Pet

material % dia. mm

CuSn 70 2,47

CuSn 73 3,40

CuSn 65 4,00

CuSn 64 5,88

Cu 53 5,33

CuSn 53 5,37

CuSn 72 5,30

CuSn 78 7,85

Cu 72 5,30

dia. mm material colour

3,60 PVC

4,30 PVC

5,00 PVC

7,30 PE

6,65 PVC

6,60 PVC

6,60 PVC

10,10 PE

6,60 PVC

kg/km kg/km

4,3 14,9

10,2 20,9

11,1 25,9

22,9 46,5

19,4 45

14,1 41,1

19,2 43

40,5 86,3

23,4 44,7

mm N

15/30 120

20/40 80

25/50 90

70 250

35/70 150

35/70 150

35/70 150

100 300

35/70 150

Ohm pF/m %

75±3 55±3 82

75±3 52±2 85

75±3 52±2 85

75±3 52±2 85

75±3 54±2 82

75±3 54±2 82

75±3 52±2 85

75±2 52±2 85

75±3 52±2 85

dB/100m dB/100m dB/100m dB/100m dB/100m dB/100m dB/100m dB/100m dB/100m dB/100m dB/100m dB/100m dB/100m

3,8 5,4 8,6 10,6 21,2 26,2 33,0 45,1 48,7 65,4 73,0 77,4 87,4

2,5 3,5 5,2 6,7 13,0 15,9 20,2 27,8 29,9 40,3 45,0 47,9 53,7

2,1 3,0 4,4 5,7 11,0 13,5 16,8 23,0 24,9 33,5 37,4 39,6 44,8

1,4 2,0 2,9 3,7 7,3 9,0 11,5 15,9 17,2 23,1 25,8 27,4 31,0

1,5 2,1 3,2 4,1 8,4 10,3 13,2 18,2 19,8 26,9 30,0 31,7 36,5

1,7 2,3 3,5 4,5 8,7 10,7 13,6 18,8 20,3 27,6 30,9 32,8 37,2

1,6 2,3 3,2 4,1 8,0 9,8 12,4 17,1 18,5 24,9 27,9 29,6 33,4

1,1 1,5 2,2 2,8 5,6 6,9 8,8 12,3 13,2 17,9 20,1 21,6 24,8

1,4 2,0 2,9 3,8 7,7 9,4 12,1 16,7 18,0 24,5 27,5 29,0 33,0

dB dB dB dB class mΩ/m dB dB dB Ohm/km Ohm/km kV A EN50117

> 29 > 27 > 22 > 18 A < 0,5 > 90 > 90 > 80 310 / 30 340 2,5 na 2-4

> 30 > 28 > 26 > 22 A < 0,5 > 90 > 85 > 70 45,5 / 19,6 65,1 2,5 3 2-4

> 30 > 28 > 26 > 22 A < 0,5 > 90 > 80 > 70 35 / 18,6 53,6 2,5 4 2-4

> 30 > 28 > 26 > 22 A < 0,5 > 90 > 90 > 90 14 / 12 26 5 10 2-5

> 30 > 28 > 26 > 22 A < 0,5 > 85 > 90 > 85 22,5 / 14,9 37,4 3 6 2-4

> 30 > 28 > 26 > 22 A+ < 2,5 > 95 > 90 > 85 22,5 / 13,2 35,7 3 6 2-4

> 30 > 28 > 26 > 22 A+ < 2,5 > 95 > 90 > 80 18 / 13,9 31,9 3 8 2-4

> 30 > 28 > 23 > 20 A+ < 2,5 > 95 > 90 > 80 8,5 / 7,5 16,0 8 16 2-3

> 30 > 28 > 26 > 22 A+ < 2,5 > 95 > 85 > 75 18 / 11 29 3 8 2-4

mode m m mod. item

reel 100 500 R100S -

coil 200 1200 S200M DS100

coil 150 900 S150M DS100

reel 200 400 R200L DS250

coil 100 600 S100M DS100

coil 100 600 S100M DS100

coil 100 600 S100M DS100

drum 500 500 PD500 -

coil 100 600 S100M DS100

Class A/A+ Digital Drop Coaxials SA > 85/95 dB

SAT752F

Screen 1. Film Foil Laminate 2. Braid Braid Optical Coverage

Outer Sheath

PHYSICAL DATA Copper Content Cable Weigth Min. Bending Radius: single/repeated bends Max. Tensile Strength ELECTRICAL DATA Impedance Capacitance Velocity ratio Attenuation (at 20°C) at 5 MHz at 10 MHz at 30 MHz at 50 MHz at 200 MHz at 300 MHz at 470 MHz at 862 MHz at 1000 MHz at 1750 MHz at 2150 MHz at 2400 MHz at 3000 MHz Structural Return Loss (SRL) at 5 - 470 MHz at 470 - 1000 MHz at 1000 - 2000 MHz at 2000 - 3000 MHz Screening Attenuation (SA) at 5 - 30 MHz (TI) at 30 - 1000 MHz at 1000 - 2000 MHz at 2000 - 3000 MHz DC Resistance: inner/outer Loop Resistance Sheath Insulation Voltage Max. Current (Ieff) Specification Conformity Standard Packing Put-up Unit Length Unit Packing Content Packing Pattern(look at page 25) Fits CABLEBOX

coil 250 500 S250L DS250

DG113

NEW RP61B

Tools & Connectors (look at pages 26-29) 6

C O A X IAL C A B L E S

S IN C E 1 9 6 8

7

Standard Drop Coaxials SA > 75 dB

2. Braid Braid Optical Coverage

Protection Outer Sheath PHYSICAL DATA Copper Content Cable Weigth Min. Bending Radius: single/repeated bends Max. Tensile Strength ELECTRICAL DATA Impedance Capacitance Velocity ratio Attenuation (at 20°C) at 5 MHz at 10 MHz at 30 MHz at 50 MHz at 200 MHz at 300 MHz at 470 MHz at 862 MHz at 1000 MHz at 1750 MHz at 2150 MHz at 2400 MHz at 3000 MHz Structural Return Loss (SRL) at 5 - 470 MHz at 470 - 1000 MHz at 1000 - 2000 MHz at 2000 - 3000 MHz Screening Attenuation (SA) at 5 - 30 MHz (TI) at 30 - 1000 MHz at 1000 - 2000 MHz at 2000 - 3000 MHz DC Resistance: inner / outer Loop Resistance Sheath Insulation Voltage Max. Current (Ieff) Specification Conformity Standard Packing Put-up Unit Length Unit Packing Content Packing Pattern(look at page 25) Fits CABLEBOX

SAT703-2G

17PAtC

KF114

KF114N - KF114/MA

dia. mm material material dia. mm

0,80 Cu PEG 3,50

1,00 Cu PEG 4,75

1,13 Cu PEG 4,80

1,13 Cu PEG 4,80

1,13 Cu PEG 4,80

1,13 Cu PEG 4,80

material

APA

AP

APA

APA

APA

Cu/Pet

material % dia. mm material dia. mm material dia. mm

CuSn 47 4,00

CuSn 38 5,22

CuSn 45 5,30

CuSn 45 5,30

Cu 37 5,30

PVC 6,60

CuSn 45 5,30 PE 6,30 PVC 7,60

PVC 5,00

PVC 6,60

PE 6,80

PVC 6,60

kg/km kg/km

8,9 23,6

11,4 38,6

14,5 39,5

14,5 50,5

14,5 36,0

17,2 40,6

mm N

25/50 90

35/70 150

35/70 150

40/80 150

35/70 150

35/70 150

Ohm pF/m %

75±3 52±2 85

75±3 54±2 82

75±3 52±2 85

75±3 52±2 85

75±3 52±2 85

75±3 52±2 85

dB/100m dB/100m dB/100m dB/100m dB/100m dB/100m dB/100m dB/100m dB/100m dB/100m dB/100m dB/100m dB/100m

2,3 2,8 4,6 5,6 10,9 13,7 17,4 23,3 25,2 34,0 38,2 40,4 44,2

2,0 2,8 3,8 4,6 8,6 10,5 13,6 18,8 20,4 27,8 31,1 33,3 37,7

1,6 2,1 3,2 4,1 7,9 9,8 12,4 17,1 18,5 24,9 27,9 29,6 33,4

1,6 2,1 3,2 4,1 7,9 9,8 12,4 17,1 18,5 24,9 27,9 29,6 33,4

1,6 2,1 3,2 4,1 7,9 9,8 12,4 17,1 18,5 24,9 27,9 29,6 33,4

1,4 2,0 3,0 3,7 7,8 9,6 11,9 16,5 17,8 24,2 27,1 28,8 32,6

dB dB dB dB class mΩ/m dB dB dB Ohm/km Ohm/km kV A EN50117

> 30 > 28 > 26 > 22 B < 15 > 80 > 80 > 75 35 / 26 61 2,5 4 2-4

> 30 > 28 > 26 > 22 B < 15 > 75 > 80 > 67 22,5 / 33 55,5 3 6 2-4

> 30 > 28 > 26 > 22 B < 15 > 80 > 80 > 70 18 / 22 40 3 8 2-4

> 30 > 28 > 26 > 22 B < 15 > 80 > 80 > 70 18 / 22 40 8 8 2-5

> 30 > 28 > 26 > 22 A <5 > 85 > 80 > 70 18 / 22 40 5 8 2-5

> 30 > 28 > 26 > 22 B < 15 > 75 > 85 > 75 18 / 22 40 3 8 2-4

mode m m mod. item

coil 150 900 S150M DS100

coil 100 600 S100M DS100

reel 200 400 R200L DS250

coil 100 600 S100M DS100

coil 250 500 S250L DS250

coil 100 600 S100M DS100

coil 250 500 S250L DS250

coil 250 500 S250L DS250

coil 100 600 S100M DS100

The following notes provide additional information regarding the quality of CAVEL cables.

What is a “physical gas injected” dielectric?

Gas injection is the technology used for producing the physical foam dielectric of coaxial cables since the early ‘90s.

Before this technology was introduced the blowing up of the foam PE dielectric insulation was done by chemical powders. They were blended together with Low Density solid Polyethylene (LDPE) which decomposed the powders into gas under the effect of extrusion temperature. That method limited the mechanical strength of the dielectric and jeopardised the life of the attenuation values, mainly due to the presence of moisture in the environment. By contrast, an insulation made with nitrogen gas physically injected into High Density Polyethylene (HDPE) produces a foam dielectric that grants the cable much better mechanical, electrical and ageing performance, almost equivalent to that of a solid PE dielectric. This is particularly beneficial where a coaxial cable is exposed to crushing, squashing and bending manoeuvres during installation. Gas injection also ensures a longer life span and stable attenuation values. In accordance with the EN50117-1 Specs.–Paragraph 5.3.5 which prescribes: 3 cycles of 24h at -40°C and 24h at 70°C, we add 95% relative humidity to the third cycle, further tests show that attenuation increases less than 5% over original values. The graph shows the attenuation increase (at 1750 MHz) of two equivalent cables, one made with chemical foam dielectric and the other with physical foam dielectric.

BEFORE AFTER

-60 -50 -40 -30 -20

coil 250 500 S250L DS250

-10 0 Increase %:

Chemical 68%

Skin-Foam-Skin extrusion

Firstly CAVEL cables are extruded by physical foam PE gas injection with the aim of reducing their rate of ageing, which is mainly due to moisture ingress. In addition, this extrusion ensures optimal performance thanks to Skin-FoamSkin technology. It consists of a triple extrusion made of: a 1st layer of solid PE skin covering the inner conductor a 2nd section formed by the main extrusion of physical foam PE gas injected dielectric a 3rd layer, also of solid PE skin, covering the dielectric Thanks to this technology, the first PE layer protects the inner conductor against any longitudinal moisture ingress so that no conductor oxidation may occur; this is in addition to the adhesion of a suitable dielectric over the inner conductor. Furthermore, the stronger geometry of the dielectric section improves the eccentricity of the inner conductor, especially in the presence of cable bends; this results in extended stability of the electrical parameters. The outer skin also preserves the integrity of the cable against longitudinal moisture ingress; this is in combination with PIB protection, as explained in further detail below. outer skin

inner skin

inner conductor

foam dielectric

Standard Drop Coaxials SA > 75 dB

KF114

SAT703-2G

SAT703B

PIB protection

An exclusive protection system consisting of a layer of PolyIso-Butylene (PIB) covering the dielectric of cables not provided with bonded Al foil film.

It acts as an additional moisture barrier and ensures excellent attenuation stability throughout the life of the cable.

-26,4 dB

Screen 1. Film Foil Laminate

SAT703N

-25,4 dB

Dielectric

SAT703B

-53,3 dB

CONSTRUCTION DATA Inner Conductor

SAT50M

SAT50MN

-30,5 dB

SAT501N

-dB/100 m

SAT501

CAVEL code

Gas Injected <5%

Attenuation differencies after IEC 65-2-3 cycle

Tools & Connectors (look at pages 26-29) 8

C O A X IAL C A B L E S

S IN C E 1 9 6 8

9

ABOUT HALOGENS

Security Drop Coaxials LSZH Sheath DG80ZH

CAVEL code CONSTRUCTION DATA Inner Conductor Dielectric

Screen 1. Film Foil Laminate 2. Braid Braid Optical Coverage

Outer Sheath PHYSICAL DATA Copper Content Cable Weigth Min. Bending Radius: single/repeated bends Max. Tensile Strength ELECTRICAL DATA Impedance Capacitance Velocity ratio Attenuation (at 20°C) at 5 MHz at 10 MHz at 30 MHz at 50 MHz at 200 MHz at 300 MHz at 470 MHz at 862 MHz at 1000 MHz at 1750 MHz at 2150 MHz at 2400 MHz at 3000 MHz Structural Return Loss (SRL) at 5 - 470 MHz at 470 - 1000 MHz at 1000 - 2000 MHz at 2000 - 3000 MHz Screening Attenuation (SA) at 5 - 30 MHz (TI) at 30 - 1000 MHz at 1000 - 2000 MHz at 2000 - 3000 MHz DC Resistance: inner/outer Loop Resistance Sheath Insulation Voltage Max. Current (Ieff) Specification Conformity Standard Packing Put-up Unit Length Unit Packing Content Packing Pattern (look at page 25) Fits CABLEBOX

SAT703ZH

DG113ZH

DG163ZH

22/99ZH

dia. mm material material dia. mm

0,80 Cu PEG 3,50

1,13 Cu PEG 4,80

1,13 Cu PEG 4,80

1,63 Cu PEG 7,20

2,20 Cu PEG 9,90

material

APA

APA

APA

APAS

Cu/Pet

% material dia. mm dia. mm material

65 CuSn 4,00 5,00 LSZH

45 CuSn 5,30 6,60 LSZH

72 CuSn 5,30 6,60 LSZH

78 CuSn 7,85 10,10 LSZH

55 Cu 10,48 12,70 LSZH

kg/km kg/km

11,1 26,7

14,5 40,5

19,2 45,2

40,5 102,0

60,3 148,3

mm N

25/50 90

35/70 150

35/70 150

100 300

150 600

Ohm pF/m %

75±3 52±2 85

75±3 52±2 85

75±3 52±2 85

75±2 52±2 85

75±2 52±2 85

dB/100m dB/100m dB/100m dB/100m dB/100m dB/100m dB/100m dB/100m dB/100m dB/100m dB/100m dB/100m dB/100m

2,1 3,0 4,4 5,7 11,0 13,5 16,8 23,0 24,9 33,5 37,4 39,6 44,8

1,6 2,1 3,2 4,1 7,9 9,8 12,4 17,1 18,5 24,9 27,9 29,6 33,4

1,6 2,3 3,2 4,1 8,0 9,8 12,4 17,1 18,5 24,9 27,9 29,6 33,4

1,1 1,5 2,2 2,8 5,6 6,9 8,8 12,3 13,2 17,9 20,1 21,6 24,8

0,8 1,1 1,5 2,0 4,0 4,9 6,4 9,1 9,8 13,3 14,9 15,7 18,3

dB dB dB dB class mΩ/m dB dB dB Ohm/km Ohm/km kV A EN50117

> 30 > 28 > 26 > 22 A <5 > 90 > 80 > 70 35 / 18,6 53,6 2,5 4 2-5

> 30 > 28 > 26 > 22 B < 15 > 80 > 80 > 70 18 / 22 40 3 8 2-5

> 30 > 28 > 26 > 22 A+ < 2,5 > 95 > 90 > 80 18 / 13,9 31,9 3 8 2-5

> 30 > 28 > 23 > 20 A+ < 2,5 > 95 > 90 > 80 8,5 / 7,5 16 5 16 2-3

> 30 > 28 > 23 > 20 A <5 > 90 > 100 > 85 5 / 8,5 13,5 5 21 2-3

mode m m mod. item

coil 150 900 S150M DS100

coil 100 600 S100M DS100

drum 500 500 PD500 -

drum 500 500 PD500 -

coil 250 500 S250L DS250

coil 100 600 S100M DS100

coil 250 500 S250L DS250

The CAVEL coaxial cables included in this series, identified by the suffix ZH (Zero Halogen), have been provided with a RAL7001 grey outer sheath. For safety purposes, the sheaths are made with a special thermoplastic compound that has special flame-retardant properties.

It is well known that ducts crowded with cables can lead to the rapid propagation of fire and that the greatest danger to health and life is the inhalation of toxic fumes generated by the combustion of thermoplastic materials. Fumes generated by the combustion of chlorine-based compounds, such as PVC, have: - high corrosive power, capable of damaging all common electronic devices; - high toxicity levels, inasmuch as 500 ppm of hydrochloric acid can be fatal after an exposure of 15 minutes, as opposed to 100,000 ppm of carbon dioxide or 4,000 ppm of carbon monoxide.

With the aim of supplying our customers a number of safety cables covering a wide variety of possible applications, we present our current range of ZH coaxials, provided

with a sheath having the following characteristics: - flame and fire retardant both for the single cable and a cable bundle vertically installed - low smoke and fume emission - zero halogen - UV resistant

Security Drop Coaxials LSZH Sheath DG163ZH

The ZH sheath on our coaxial cables has been homologated: - in the ‘90s, by the ISPT (Italian Superior Institute for Post and Telecommunications); - in 2008, by the EZC (Electrotechnical Testing Institute) of Czech Republic.

We recommend the use of this range of cables for any installation in public buildings and environments where there is a likely presence of many people, e.g.: hospitals, schools, hotels, banks, tube stations, cinemas, theatres, airports etc.

In addition to the special safety characteristics of the outer sheath, these ZH coaxial cables have the same physical and electrical characteristics as the equivalent SAT, DG and trunk cables. Therefore, they can be used to cover most applications in terrestrial, satellite and digital installation systems.

DG113ZH

SAT703ZH

Tools & Connectors (look at pages 26-29)

10

C O A X IAL C A B L E S

S IN C E 1 9 6 8

11

SMATV Multicore Coaxials MULTISWITCH 1st IF DISTRIBUTION Construction

2x

5x

9x

2x

5x

9x

Both single and community satellite reception systems are often provided with a duel-feed parabolic antenna, i.e. where the satellite dish is provided with two LNBs, suitable for receiving signals from two different satellites or groups of satellites. In this case the drop line requires two coaxial cables, one for each LNB. Furthermore, the multiswitch distribution system makes it possible to independently distribute, among all users in the same building, a wide range of both satellite and terrestrial TV signals. For this reason the need for the so-called “light cabling system” is fulfilled by the use of multicore coaxials.

Due to this technology the signals distribution requires: - 4 coaxials for the satellite distribution and 1 coaxial for the terrestrial distribution, where the dish is provided with 1 converter

2xDG80

CAVEL code

5xDG80M

9xDG80M

2x17VAtC

5x17VAtCM

9x17VAtCM

- 2 groups of 4 coaxials for the satellite distribution and 1 coaxial for the terrestrial if the dish is provided with 2 LNBs

CONSTRUCTION DATA Central Filler

A

Single cable

B

Single Cable’s Sheath

material -

white PVC

dia. mm

-

code

DG80 (1)

3,50

8,50

white PVC

-

DG80 (1)

material dia. mm

4,80

17VAtC (2)

11,40

white PVC with colored stripe

-

white PVC with colored stripe

-

5,00

-

6,80

Spirally Wrapped Film

C

material -

Pet

-

Pet

Outer Sheath

E

material white PVC

black LSZH (flexible PE)

We designed the twin and multicore coaxials shown here with the aim of offering the easiest solutions to professional installers. The use of these cables allows installers to save a lot of time when laying the distribution network.

17VAtC (2)

white PVC

black LSZH (flexible PE)

Inner Diameter

D1 mm

-

13,60

18,55

-

18,45

24,85

Outer Diameter

D2 mm

5x11,00

15,00

19,80

6,8x14,6

20,00

26,20

2x 2 coaxials for dual feed parabolic antenna

PHYSICAL DATA Copper Content

kg/km

22,3

57,4

101,7

28,9

72,5

133,6

Cable Weight

kg/km

56,3

216,2

364,2

81,7

360,0

670,0

Put-up

mode

coil

drum

drum

reel

drum

drum

Unit Length

m

150

100

100

100

100

50

5x 4 coaxials for 1 satellite drop line 1 coaxial for the terrestrial drop line

Standard Packing

Unit Length Weight

kg

6,3

26,6

36,4

8,8

41,0

40,5

74,7

Unit Packing Content

m

300

100

100

200

100

50

100

9x 4+4 coaxials for 2 satellite drop lines 1 coaxials for the terrestrial drop line

Packing Pattern (look at page 25)

mod.

S150L

PD100

PD100

R100L

PD100

PD50 PD100

Fits CABLEBOX

item

DS250

-

-

DS250

-

-

A A

Tools & Connectors (look at pages 26-29) B

(1) single cable’s data at page 6 (2) single cable’s data at page 8

B

C O A X IAL C A B L E S

B

A

C

B A

E

C B

E C

B

A

B A

C

C B

E

E C

A

E

B

E

B

B C

A

B

B

C

9x9x9x

E

C

A A A

E

B B

B

C

E

C

E

C

Twin cables Both 2xDG80 and 2x17VAtC have just one of the cables printed on the outer sheath; this facilitates the connection of remote poles.

E

E

B

D1 D2

D1 D2

D1 D2

5x 5x5x

A B

D1D1 D2 D2

D1 D2D1 D2

2x 2x2x

12

100

D1 D2

2x2x

2x

5x 5x

5x

D1 D2

D1 D2

D1 D2

9x 9x

Colour Coding of Multicore Coaxial Cables Each single cable in the bundle has two coloured stripes on the outer sheath, except for the whitesheathed cable in the core of the bundle. This makes it easier to identify the cables and insert further remote poles.

Furthermore, we have adopted the colour coding system already used by several European manufactures of active and passive components and equipment designed for multiswitch distribution.

By convention the following functions have been assigned to this colour coding system:

SMATV Multicore Coaxials

9x

Colour Function Red High Band Vertical Yellow High Band Horizontal White Terrestrial Green Low Band Horizontal Black Low Band Vertical Multicore coax with multipurpose outer jacket “M” Initially, these cables were made with a common hard PE jacket, the stiffness of which made their installation quite difficult, if not impossible.

With the aim of making it easier to install these cables in both outdoor and underground applications, they have been provided with a flexible black PE outer sheath compound.

The M suffix in the code identifies these versions, which entered production at the start of 2010.

This jacket is not only flameretardant but also zero-halogen (halogen-free), therefore it is fire-safe and suitable for indoor applications. Outdoor installations are also possible due to the compound’s carbon black content and resistance to UV rays.

For underground applications we recommend installation in pipes and ducts.

5x

2x

D1 D2

9x

S IN C E 1 9 6 8

13

Distribution and Trunk Coaxials Outdoor and Underground Installation CAVEL code CONSTRUCTION DATA Inner Conductor Dielectric

Screen 1. Film Foil Laminate 2. Braid Braid Optical Coverage Flooding Compound Filling Outer Sheath PHYSICAL DATA Copper Content Cable Weigth Min. Bending Radius: single/repeated bends Max. Tensile Strength ELECTRICAL DATA Impedance Capacitance Velocity ratio Attenuation (at 20°C) at 5 MHz at 10 MHz at 30 MHz at 50 MHz at 200 MHz at 300 MHz at 470 MHz at 862 MHz at 1000 MHz at 1750 MHz at 2150 MHz at 2400 MHz at 3000 MHz Structural Return Loss (SRL) at 5 - 470 MHz at 470 - 1000 MHz at 1000 - 2000 MHz at 2000 - 3000 MHz Screening Attenuation (SA) at 5 - 30 MHz (TI) at 30 - 1000 MHz at 1000 - 2000 MHz at 2000 - 3000 MHz DC Resistance: inner / outer Loop Resistance Sheath Insulation Voltage Max. Current (Ieff) Specification Conformity Standard Packing Put-up Unit Length Content Packing Pattern(look at page 25)

CATV11

RG11FC

11/50FC

17/73FC

22/99FC

27/115FC

34/145FC

dia. mm material material dia. mm

1,63 Cu PEG 7,20

1,63 FeCu PEG 7,20

1,13 Cu PEG 4,80

1,63 Cu PEG 7,20

2,20 Cu PEG 9,90

2,70 Cu PEG 11,50

3,40 Cu PEG 14,50

material

APAS

APA

Cu/Pet

Cu/Pet

Cu/Pet

Cu/Pet

Cu

material % dia. mm material

CuSn 63 7,85 PJ

Al 65 7,94 PJ

Cu 60 5,38 PJ

Cu 64 7,78 PJ

Cu 55 10,48 PJ

Cu 52 12,20 PJ

Cu 61 15,26 PJ

dia. mm material

10,10 PE

10,10 PE

7,30 PE

10,10 PE

12,70 PE

15,00 PE

19,80 PE

kg/km kg/km

34,9 83,5

70

22,9 46

40,6 85,6

60,3 128,4

84,4 178

153 332

mm N

100 300

100 800

50 200

100 300

150 600

200 800

250 1200

Ohm pF/m %

75±2 52±2 85

75±2 53±2 85

75±3 52±2 85

75±2 52±2 85

75±2 52±2 85

75±2 52±2 85

75±2 53±2 85

dB/100m dB/100m dB/100m dB/100m dB/100m dB/100m dB/100m dB/100m dB/100m dB/100m dB/100m dB/100m dB/100m

1,1 1,5 2,2 2,8 5,6 6,9 8,8 11,9 12,8 17,9 19,8 21,0 24,0

1,1 1,5 2,2 2,8 5,6 6,9 8,8 12,3 13,2 18,5 20,8 22,2 25,3

1,5 2,1 2,9 3,8 7,9 9,7 12,0 16,8 17,9 24,8 27,3 29,1 33,0

1,1 1,5 1,9 2,5 5,3 6,5 8,3 11,5 12,4 17,1 19,2 20,4 23,3

0,8 1,1 1,5 2,0 4,0 4,9 6,4 9,1 9,8 13,3 14,9 15,7 18,3

0,8 1,1 1,3 1,7 3,4 4,2 5,5 7,7 8,4 11,4 12,8 13,6 15,4

0,5 0,7 1,1 1,4 2,9 3,6 4,6 6,4 6,9 9,4 10,6 11,5 13,3

dB dB dB dB class mΩ/m dB dB dB Ohm/km Ohm/km kV A EN50117

> 30 > 28 > 23 > 20 A <5 > 85 > 100 > 90 8,5 / 10 18,5 8 16 2-3

> 30 > 28 > 23 > 20 A <5 > 90 > 85 > 85 37,5 / 11,5 49 8 8 2-3

> 30 > 28 > 26 > 22 A <5 > 85 > 85 > 70 18 / 13,5 31,5 8 8 2-5

> 30 > 28 > 23 > 20 A <5 > 85 > 95 > 85 8,5 / 9,5 18 8 16 2-3

> 30 > 28 > 23 > 20 A <5 > 90 > 100 > 85 5 / 8,5 13,5 8 21 2-3

> 25 > 24 > 23 > 22 A+ < 2,5 > 95 > 95 > 85 3,4 / 5,8 9,2 8 25 2-3

> 25 > 24 > 21 > 20 A+ < 2,5 > 95 > 85 > 80 2,1 / 2,6 4,7 12 34 2-3

mode m mod.

drum 500 PD500

drum 500 PD500

drum 500 PD500

drum 500 PD500

drum 500 PD500

drum 500 WD500

drum 700 WD700

COAXIAL CABLES FOR CATV SYSTEMS Presented below are some features of CAVEL distribution and trunk cables which are widely represented in different versions within this catalogue.

All of these products have some common features including:

Distribution and Trunk Coaxials Outdoor and Underground Installation

RG11FC

- low losses

17/73FC

- high screening effectiveness, also known as screening attenuation (SA) - long-lasting stability of signal attenuation thanks to physical gas injected foam PE dielectric technology (skin-foam-skin).

CATV11

All are suitable for laying branch stretches of long TV and Triple Play broadband distribution systems.

They are an excellent means of distribution for any terrestrial and satellite TV system as well as telephone and internet services.

Furthermore they provide stable SRL and attenuation ranging from 5 to 3000 MHz

SUGGESTED APPLICATIONS Only cables provided with a specific PE outer sheath, strong enough to protect the coaxial core from the environment, must be used for outdoor and underground installations.

In addition, both our series of cables for underground installation as well as those provided with messenger for suspended installations, are provided with a petrol jelly (PJ) flooding compound filling. It is interposed between the braid and the outer PE sheath to prevent moisture ingress. Furthermore, it is a non-dropping compound so it can also be safely used in vertical cable stretches. to be continued >

Tools & Connectors (look at pages 26-29)

14

C O A X IAL C A B L E S

S IN C E 1 9 6 8

15

Distribution Coaxials Outdoor Hung-up Installation with Messenger CAVEL code CONSTRUCTION DATA Inner Conductor

dia. mm material material dia. mm

Dielectric

Screen 1. Film Foil Laminate 2. Braid Braid Optical Coverage Flooding Compound Filling FeZn Messenger Outer Sheath PHYSICAL DATA Copper Content Cable Weigth Min. Bending Radius: single/repeated bends Max. Tensile Strength Messenger Max. Tensile Strength ELECTRICAL DATA Impedance Capacitance Velocity ratio Attenuation (at 20°C) at 5 MHz at 10 MHz at 30 MHz at 50 MHz at 200 MHz at 300 MHz at 470 MHz at 862 MHz at 1000 MHz at 1750 MHz at 2150 MHz at 2400 MHz at 3000 MHz Structural Return Loss (SRL) at 5 - 470 MHz at 470 - 1000 MHz at 1000 - 2000 MHz at 2000 - 3000 MHz Screening Attenuation (SA) at 5 - 30 MHz (TI) at 30 - 1000 MHz at 1000 - 2000 MHz at 2000 - 3000 MHz DC Resistance: inner / outer Loop Resistance Sheath Insulation Voltage Max. Current (Ieff) Specification Conformity Standard Packing Put-up Unit Length Content Packing Pattern (look at page 25)

DG113PEM

CATV11AP

22/99AP

27/115AP

34/145AP

1,13 Cu PEG 4,80

1,63 Cu PEG 7,20

2,20 Cu PEG 9,90

2,70 Cu PEG 11,50

3,40 Cu PEG 14,50

material material % dia. mm material size mm size mm material

APA CuSn 72 5,30 PJ 1xØ1,25 6,8x11,2 PE

APAS CuSn 63 7,85 PJ 7xØ0,80 10,1x17 PE

Cu/Pet Cu 55 10,48 PJ 7xØ0,80 12,7x18,5 PE

Cu/Pet Cu 52 12,20 PJ 7xØ0,80 15x22,5 PE

Cu Cu 61 15,26 PJ 7xØ0,80 19,8x25,5 PE

kg/km kg/km

19,2 58,7

34,9 122,4

60,3 171,3

84,4 219,7

153 370,4

mm N

35/70 150

100 300

150 600

200 800

250 1200

N

1500

5000

5000

5000

5000

Ohm pF/m %

75±3 52±2 85

75±2 52±2 85

75±2 52±2 85

75±2 52±2 85

75±2 53±2 85

dB/100m dB/100m dB/100m dB/100m dB/100m dB/100m dB/100m dB/100m dB/100m dB/100m dB/100m dB/100m dB/100m

1,6 2,3 3,2 4,1 8,0 9,8 12,4 17,1 18,5 24,9 27,9 29,6 33,4

1,1 1,5 2,2 2,8 5,6 6,9 8,8 11,9 12,8 17,9 19,8 21,0 24,0

0,8 1,1 1,5 2,0 4,0 4,9 6,4 9,1 9,8 13,3 14,9 15,7 18,3

0,8 1,1 1,3 1,7 3,4 4,2 5,5 7,7 8,4 11,4 12,8 13,6 15,4

0,5 0,7 1,1 1,4 2,9 3,6 4,6 6,4 6,9 9,4 10,6 11,5 13,3

dB dB dB dB class mΩ/m dB dB dB Ohm/km Ohm/km kV A EN50117

> 30 > 28 > 26 > 22 A+ < 2,5 > 95 > 90 > 80 18 / 13,9 31,9 5 8 2-5

> 30 > 28 > 23 > 20 A <5 > 85 > 100 > 90 8,5 / 10 18,5 8 16 2-3

> 30 > 28 > 23 > 20 A <5 > 90 > 100 > 85 5 / 8,5 13,5 8 21 2-3

> 25 > 24 > 23 > 22 A+ < 2,5 > 95 > 95 > 85 3,4 / 5,8 9,2 8 25 2-3

> 25 > 24 > 21 > 20 A+ < 2,5 > 95 > 85 > 80 2,1 / 2,6 4,7 12 34 2-3

mode m mod.

drum 500 PD500

drum 500 PD500

drum 500 WD500

drum 500 WD500

drum 700 WD700

In combination with the use of sealed hardline connectors, we recommend that these cables are installed in any environment where the presence of water or a high moisture ratio are likely, such as tunnels, underground parks etc.

Both the underground cables and the ones with messenger are available in a wide range of cable sizes.

As drop cables we offer 11/50FC for underground applications and DG113PEM for suspended applications, the latter provided with a single wire messenger.

In the group of RG11 distribution cables the 17/73FC is recommended for underground installation together with CATV11 and RG11FC, while CATV11AP is the one with messenger. From this size up, the messenger is always a stranded rope with a maximum pulling force in excess of 500 kg.

Cables with inner conductors sized 2.2, 2.7 and 3.4 mm complete the offer of the trunk series, both for underground and with messenger cables.

Distribution Coaxials Outdoor Hung-up Installation with Messenger

22/99AP

CATV11AP

We recommend that all cables laid underground are installed in pipes and ducts, even if this solution implies a higher initial installation cost. In addition to substituting a faulty cable, it may be necessary to update the network distribution with different transmission means.

Tools & Connectors (look at pages 26-29)

16

C O A X IAL C A B L E S

S IN C E 1 9 6 8

17

Radio Frequency Coaxials According to MIL-C-17 Specs.

Hybrid Coaxials for Special Applications SAT501 AWG

SAT50M DF2N

11/48LO PIPE

dia. mm material material dia. mm

0,80 Cu PEG 3,50

1,00 Cu PEG 4,75

1,13 Cu PEG 4,80

material

APA

CAVEL code 50 Ohm

Inner Conductor

dia. mm material material dia. mm

Dielectric

7x0,16 FeCu PE 1,50

7x0,75 Cu PE 7,25

RG59B/U 0,58 FeCu PE 3,70

CONSTRUCTION DATA Inner Conductor Dielectric Screen 1. Film Foil Laminate

AP

Outer Sheath PHYSICAL DATA Copper Content Cable Weigth Min. Bending Radius: single/repeated bends Max. Tensile Strength ELECTRICAL DATA Impedance Capacitance Velocity Ratio Attenuation (at 20°C) at 50 MHz at 200 MHz at 300 MHz at 470 MHz at 862 MHz at 1000 MHz Structural Return Loss (SRL)

2. Braid Braid Optical Coverage

% material dia. mm

88 CuSn 1,90

93 CuSn 3,43

96 Cu 7,97

94 Cu 4,30

dia. mm material

2,80 PVC II

5,00 PVC II

10,30 PVC II

6,15 PVC II

Inner Sheath

kg/km kg/km

4,6 11,8

16,6 35,9

73,8 151,3

20,1 51,8

Non Migrating Film Outer Sheath

mm N

15/30 120

25/50 90

50/100 400

30/60 200

Ohm pF/m %

50 ± 2 101 ± 2 66

50 ± 2 100 ± 2 66

50 ± 2 100 ± 2 66

75 ± 3 66 ± 2 66

PHYSICAL DATA Copper Content Cable Weigth Min. Bending Radius: single/repeated bends Max. Tensile Strength

dB/100m dB/100m dB/100m dB/100m dB/100m dB/100m

20,0 42,5 51,0 63,0 86,1 97,0

10,7 23,5 29,6 38,7 55,4 61,1

4,1 9,0 11,3 14,8 21,2 23,6

7,7 16,0 19,9 25,4 35,3 38,7

at 30 - 300 MHz at 300 - 600 MHz at 600 - 1000 MHz Screening Attenuation (SA) at 5 - 30 MHz at 30 - 1000 MHz DC Resistance: inner/outer Loop Resistance Maximun Power at 100 MHz at 400 MHz at 1000 MHz Sheath Insulation Voltage Specification Conformity Standard Packing Put-up Unit Length Unit Packing Content Packing Pattern (look at page 25)

dB dB dB

> 21 > 19 > 18

> 26 > 25 > 24

> 27 > 26 > 24

> 28 > 25 > 23

mΩ/m dB Ohm/km Ohm/km

11 > 55 290 / 42 332

8 > 55 38,5 / 16,5 55

8 > 55 6,5 / 4,5 11

15 > 55 158 / 11 169

W W W kV MIL-C-17

50 25 15 2 119F

200 60 35 5 28C

830 320 180 5 74C

300 135 75 3 29C

mode m m mod.

reel 100 500 R100S

coil 150 900 S150M

reel 100 200 R100L

coil 100 600 S100M

Fits CABLEBOX

item

-

DS100

DS250

DS100

Tools & Connectors (look at pages 26-29)

C O A X IAL C A B L E S

material % dia. mm

CuSn 47 4,00

1x2x24AWG Ø 0,51Cu Ø 1,10PE

CuSn 38 5,22

Coax RP913 1,13 Cu PEG 4,80

Cu/Pet Twisted Pair

Twisted Pair

Screen Braid Braid Optical Couverage

18

19x0,18 CuSn PE 2,95

6 U/UTP Category 4x2x AWG23 Construction LAN640CW CONSTRUCTION DATA 0,57 dia. mm Conductors Cu material PE material Insulation 1,00 dia. mm

75 Ohm

RG174A/U RG58C/U RG213/U

CAVEL code CONSTRUCTION DATA

H6091ZHB

1x2x24AWG Ø 0,51Cu Ø 1,10PE

AP Empty Tube

Cu 53 5,30

HDPE inner Ø 5,5 outer Ø 7,2

CuSn 71 5,35

+

ELECTRICAL DATA Impedance Capacitance Velocity ratio Attenuation (at 20°C) at 5 MHz at 10 MHz at 30 MHz at 50 MHz at 200 MHz at 300 MHz at 470 MHz at 862 MHz at 1000 MHz at 1750 MHz at 2150 MHz at 2400 MHz at 3000 MHz Structural Return Loss (SRL) at 5 - 470 MHz at 470 - 1000 MHz at 1000 - 2000 MHz at 2000 - 3000 MHz Screening Attenuation (SA) at 5 - 30 MHz (TI) at 30 - 1000 MHz at 1000 - 2000 MHz at 2000 - 3000 MHz DC Resistance: inner / outer Loop Resistance Sheath Insulation Voltage Max. Current (Ieff) Specification Conformity Standard Packing Put-up Unit Length Unit Packing Content Packing Pattern(look at page 25) Fits CABLEBOX

material dia. mm material size mm material

PVC 5,00 Pet 6,0x8,2 PVC

PVC 6,60 Pet 9,8x11,5 PVC

kg/km kg/km

12,5 44,7

mm N

Electrical Leads

PE 7,30 8,1x15,3 PE

6,6x13,2 LSZH

20,0 42,5

24,0 92,0

22,3 76,6

19,1 44,4

25/50 90

35/70 150

50 200

35/70 150

70/35 0÷50 -20÷60 100

Ohm pF/m %

75±3 52±2 85

75±3 54±2 82

75±3 52±2 85

75±3 52±2 85

dB/100m dB/100m dB/100m dB/100m dB/100m dB/100m dB/100m dB/100m dB/100m dB/100m dB/100m dB/100m dB/100m

2,3 2,8 4,6 5,6 10,9 13,7 17,4 23,3 25,2 34,0 38,2 40,4 44,2

2,0 2,8 3,8 4,6 8,6 10,5 13,6 18,8 20,4 27,8 31,1 33,3 37,7

1,5 2,1 2,9 3,8 7,9 9,7 12,0 16,8 17,9 24,8 27,3 29,1 33,0

1,4 1,9 3,0 4,0 8,1 9,9 12,6 17,3 18,7 25,7 28,8 30,6 34,1

dB dB dB dB class mΩ/m dB dB dB Ohm/km Ohm/km kV A EN50117

> 30 > 28 > 26 > 22 B < 15 > 80 > 80 > 75 35 / 26 61 2,5 4 2-4

> 30 > 28 > 26 > 22 B < 15 > 75 > 80 > 67 22,5 / 33 55,5 3 6 2-4

> 30 > 28 > 26 > 22 A <5 > 85 > 85 > 70 18 / 13,5 31,5 8 8 2-5

> 30 > 28 > 26 > 22 A++ < 0,9 > 112 > 104 > 91 18 / 10,7 28,7 3 8 2-4

mode m m mod. item

reel 200 400 R200L DS250

reel 100 200 R100L DS250

drum 400 400 PD400 -

coil 100 2 S100L DS250

2x0,5 sq.mm Max. Curr. 4A Max. Volt. 50V Res. 37 Ω/km

kg/km kg/km

PHYSICAL DATA Copper Content Cable Weigth Min. Bending Radius

Tools & Connectors (look at pages 26-29)

mm installation / operation °C Temperature installation operation °C Max. Tensile Strength N

Att.

100+/-15 100+/-22 48 67 NEXT ACR SRL

1,8 5,4 7,7 9,6 13,7 17,4 21,9 25,0 28,1

100,0 80,0 70,0 65,0 60,0 60,0 55,0 55,0 50,0

dB/100m dB

ELECTRICAL DATA Impedance Ohm 1 ÷ 100 MHz Ohm 100 ÷ 250 MHz pF/m Mutual Capacitance % Velocity Ratio a 20°C

Transmission Data

MHz MHz MHz MHz MHz MHz MHz MHz MHz Ohm/km Mohm/km V IEC 60332-1 acc.to 50173; 50288-5-1 EN 61156-5 IEC 11801 2nd ed. ISO/IEC 568B.2 TIA/EIA

at 1 at 10 at 20 at 31,2 at 62,5 at 100 at 155,5 at 200 at 250 Loop Resistance

dB/100m dB

98,2 74,6 62,3 55,4 46,3 42,6 33,1 30,0 21,9 <160 >5000 1000

25,0 25,0 25,0 25,0 25,0 25,0 25,0 20,0 20,0

S IN C E 1 9 6 8

Insulation Resistance Voltage Test(1min. DC) Flame Resistance Specifications Conformity

19

VS80 specifically designed for CCTV

Video Security Coaxial Cables - Multipurpose Installation VS80

CAVEL code CONSTRUCTION DATA Inner Conductor

dia. mm material material dia. mm

Dielectric

0,80 Cu PEG 3,50

VS80 205 0,80 Cu PEG 3,50

VS80 210 Electrical Leads 2x0,5 sq.mm Max. Curr. 4A Max. Volt. 50V

0,80 Cu PEG 3,50

Res. 37 Ω/km

Screen 1. Film Foil Laminate

2. Braid Braid Optical Coverage

Sheath Non Migrating Film Outer Sheath PHYSICAL DATA Copper Content Cable Weigth Min. Bending Radius: single/repeated bends Max. Tensile Strength ELECTRICAL DATA Impedance Capacitance Velocity ratio Attenuation (at 20°C) at 5 MHz at 10 MHz at 30 MHz at 50 MHz at 200 MHz at 300 MHz at 470 MHz at 862 MHz at 1000 MHz at 1750 MHz at 2150 MHz at 2400 MHz at 3000 MHz Structural Return Loss (SRL) at 5 - 470 MHz at 470 - 1000 MHz at 1000 - 2000 MHz at 2000 - 3000 MHz Screening Attenuation (SA) at 5 - 30 MHz (TI) at 30 - 1000 MHz at 1000 - 2000 MHz at 2000 - 3000 MHz DC Resistance: inner/outer Loop Resistance Sheath Insulation Voltage Max. Current (Ieff) Specification Conformity Standard Packing Put-up Unit Length Unit Packing Content Packing Pattern(look at page 25) Fits CABLEBOX

Electrical Leads 2x1,0 sq.mm Max. Curr. 8A Max. Volt. 50V Res. 18 Ω/km

material

APA

APA

APA

material % dia. mm

CuSn 65 4,00

CuSn 65 4,00

CuSn 65 4,00

dia. mm material material size mm material

5,00 LSZH

5,00 LSZH Pet 7,2x9,0 LSZH

5,00 LSZH Pet 7,2x9,8 LSZH

kg/km kg/km

11,1 26,7

20,0 66,5

27,8 78,0

mm N

25/50 90

Ohm pF/m %

75±3 52±2 85

dB/100m dB/100m dB/100m dB/100m dB/100m dB/100m dB/100m dB/100m dB/100m dB/100m dB/100m dB/100m dB/100m

2,1 3,0 4,4 5,7 11,0 13,5 16,8 23,0 24,9 33,5 37,4 39,6 44,8

dB dB dB dB class mΩ/m dB dB dB Ohm/km Ohm/km kV A EN50117

> 30 > 28 > 26 > 22 A < 2,5 > 90 > 80 > 70 35 / 18,6 53,6 2,5 4 2-5

mode m m mod. item

coil 150 900 S150M DS100

As an alternative to obsolete RG/U cables in accordance with MIL standards, CAVEL offers the VS80 single coaxial cables and two versions provided with electrical leads. All are provided with an outer sheath with the following features: - flame-retardant - low smoke and fume emission - zero halogen - UV resistant They are suitable for indoor and outdoor installations as well as for fire-safe installations.

attenuation) and, above all, very long routing distances without requiring signal amplification, all critical features for high quality cuttingedge installations.

As an alternative to obsolete MIL standard cables, which are still frequently used in video security systems, CAVEL offers the VS80 coaxial cable with: - physical foam PE dielectric, providing optimised attenuation and - a double screen providing Class A screening attenuation, according to EN50117 specifications.

The video security sector is constantly developing due to the increasing demand for remote controlled security systems in both private and public sectors. Many systems use analogue cameras (4-6 MHz frequency base band or composite video), although digital systems are gaining in popularity.

The same cable is also available in the versions: - VS80205 which has two coupled electrical leads (2x0.50 mm2 section) and - VS80210 (2x1.00 mm2), both suitable for feeding power to remote devices.

The outer sheath, containing both the coaxial cable and the two power conductors, ensures electrical insulation up to 1000V.

Installers traditionally use classic components, namely MIL standard type coaxial cables with PVC outer sheath and solid polyethylene dielectric, such as: RG59B/U, KX6 and URM70.

These cables have been surpassed on a technical level by coaxial cables with gas injected foam PE dielectric and foil/braid screen.

The latest generation of TV cables afford superior performance in terms of signal loss (attenuation), shielding from interfering signals (screening

Video Security Coaxial Cables Multipurpose Installation

VS80205

VS80210

VS80

The main differences with respect to conventional RG/U cable are shown in the table below.

In addition, CAVEL offers a series of connectors as well as cable accessories designed specifically for professional CCTV system engineers (see Cross Ref. Table on page 30).

Main differences between RG59 and CAVEL VS80

reel 150 300 R150L DS250

reel 150 300 R150L DS250

Parameters

RG59

VS80

Attenuation @ 5 MHz [dB/100m] (typical analogue camera application)

2.5

2.1

Attenuation @ 200 MHz

16,0

11,0

[dB]

> 55

> 90

[mm]

6.15

5.00

[dB/100m]

Screening Attenuation 30-1000 MHz Outer Diameter

Tools & Connectors (look at pages 26-29) 20

C O A X IAL C A B L E S

S IN C E 1 9 6 8

21

CABLEBOX DISPENSER PACKING SYSTEM

THE PAST old pack solution ...of just 1 pallet with 12 km of cable, WHAT DO YOU DO WITH: 48 dirty wooden drums or 120 useless plastic reels?

THIS IS A WASTE DISPOSAL PROBLEM! 250 m

Until recently, coils in a box or non-returnable cardboard and plastic reels were the most popular means of packaging TV coaxial cables. In spite of some inconveniences, these packages were accepted as the norm.

Today, due to environmental studies and concerns, the concept of recycling has become a paramount issue, prompting CAVEL to develop a total solution in terms of EFFICIENCY, ECONOMY and ECOLOGY.

respect the environment

This has led to the introduction of a revolutionary product - the CABLEBOX dispenser - a design based on the concepts of REDUCTION and REUTILISATION.

AFTER THE USE...

The CABLEBOX dispenser is made of a stand containing one reel, which can be easily opened into two parts. These pieces, made of a shock resistant, very strong plastic material, form a cable dispenser with a very long life expectancy.

The “refill” is represented by the coil of coaxial cable supplied by CAVEL. The dispensers are available in two sizes, suitable for either the 100 or 250 metre coil of cable.

They can be carried and are also provided with a shoulder strap. This is a safety feature that enables the installer to move with both hands free.

100 m

THE PRESENT new smart pack solution of 1 pallet with14,4 km cable, YOU WASTE JUST FEW hg OF PAPER AND PLASTIC.

The cable will always unroll perfectly without assuming a “spiral shape”, an annoying drawback of box dispensers that makes installation in ducts very difficult. This is most useful when installing a bundle of cables together in a conduit.

Rewinding excess cable back into the dispenser is very straightforward due to the access through the centre hole.

The sheath of all CAVEL cables supplied in shrinkpack form is provided with a decreasing meter marking, allowing the installer to check the length of a run or drop against the remaining contents of the dispenser.

With the CABLEBOX dispenser packing system, there is no reel disposal to consider, only a small piece of shrinkwrap.

Supplying installers with CABLEBOX dispensers offers the following advantages:

- easier installation - savings on cost and effort - opportunity to avoid environmental problems - improved safety.

100 m SHRUNK COIL

Re-usable reel

DS100 dispenser

AFTER THE USE...

ECOLOGICAL PACKING 22

C O A X IAL C A B L E S

THIS IS A TOTAL

Authenticated Packing

SOLUTION!

respect the environment

S IN C E 1 9 6 8

23

New shrinkpack disk graphics and security hologram After carrying out investigations we discovered that several imitations of CAVEL coaxial cables exist on the market.

Most are very poor-quality clones with identical packing to our products.

To prevent our customers from buying fakes and wasting money on low-quality cables, we incorporated the following two solutions into our packing materials.

Firstly we developed a new design of shrinkpack disk that enables our dealers

and distributors to help customers identify fake cables.

The table opposite shows in detail the typical application of the shrinkpack disk colours according to the different cables and lengths.

Furthermore we applied a special holographic label bearing the CAVEL trademark on each of the disks, a further safeguard against the falsification of our products.

This label is hard to reproduce and incorporating our trademark gives us grounds to mount a legal challenge in the event that it is copied.

This label certifies the origin of the product and the high quality of our cables.

In addition, all disks bear the 15-year warranty supplied with our cables.

mod. S100M 6x100m shrunk coils in box = 600m mod. S150M 6x150m shrunk coils in box = 900m mod. S200M 6x200m shrunk coils in box = 1.200m

fit CABLEBOX DS100

M

mod. S100L 2x100m shrunk coils in box = 200m mod. S150L 2x150m shrunk coils in box = 300m mod. S250L 2x250m shrunk coils in box = 500m mod. S400L 2x400m shrunk coils in box = 800m

fit CABLEBOX DS 250

L

Cross Ref. Chart of Drop Cable Coils and Shrinkpack Disks packing composition

6x Shrinkpack Coils

mod.

S100M - S100L

2x Shrinkpack Coils S150M - S150L

S200M

S250L

S400L

shrinkpack disks mod. R100S 5x100m plastic reels in box = 500m

unit length

100m

150m

200m

250m

400m

packing mode

6x100m

6x150m

6x200m

2x250m

2x400m

unit packing content

600m

900m

1.200m

500m

800m

fit Cablebox

DS100

DS100

DS100

DS250

DS250

17PAtC

S100M

2xDG80

S150L S100M

S250L

DG 113ZH

S100M

S250L

DG 70 - 70C S150M

DG 80ZH

S150M

M

mod. R200L 2x200m plastic reels in box = 400m mod. R250L 2x250m plastic reels in box = 500m

fit CABLEBOX DS 250

L

S100L

KF 114 - 114N - 114MA S100M

S250L

S100M

RG 58C/U

mod. R500XL 1x500m plastic reels in box = 500m

S150M

RG 59B/U

S100M

RP 61B

S100M

RP 913B

S100M

SAT 50M - 50 MN

S100M

SAT 501 - 501N

XL

mod. PD Plywood drums on pallet

S250L

PD

S150M

SAT 703B - 703N

S100M

S250L

SAT 703ZH

S100M

S250L

SAT 752F

S100M

TS 61L

S100M

VS 80

24

fits CABLEBOX DS 100

mod. R100L 2x100m plastic reels in box = 200m mod. R150L 2x150m plastic reels in box = 300m

S200M

DG 80 - 80C

QF 100BL

mod. R100M 5x100m plastic reels in box = 500m

S250L

DG 113 - 113C

H6091ZHB

S

S150M

C O A X IAL C A B L E S

S400L

mod. WD Wooden drums for bulk lengths on pallet

WD S IN C E 1 9 6 8

25

Tools FC02 Nickel plated scissors

Suitable for the preparation of any coaxial cable for connector insertion, (recommended for skilled users).

CS00 Multi-purpose stripper

Suitable for the state-of-the-art preparation of coaxial cables with outer diameter from 5.00 to 7.00 mm.

COT02 Compression tool suitable for such as for cables

F connectors FC501, FC703 and FC11 RG59, RG6 and RG11

CRT03 (hex. .262” and .324”) Crimping tool suitable for such as for cables

Dedicated strippers CS03J Suitable for triple shielded cable TS703J CS17VP Suitable for PE jacketed cable 17PAtC CS41 Suitable for mini RG59 cable CW41S CS70 Suitable for mini cables DG70 and DG70C

F connectors F41, F501, F70 and F703 Mini RG59 (CW41S) and RG6

COT04 Compression tool

CS17 – CS22 – CS27 – CS34 Dedicated stripper for distribution and trunk cables

These models have been designed to guarantee perfect cutting of each cable for underground installation (FC series) and with messenger for suspended installation (AP series). They make it easier to remove the PE jacket and accurately cut the dielectric and outer screen. They facilitate the mounting of additional connectors supplied by CAVEL and are suitable for outdoor and underground installations.

suitable for such as for cables

BNC connectors BNCC501 and BNCC703 RG59 and RG6

CRT04 (hex. .324” and .360”) Crimping tool F

IEC

BNC

suitable for such as for cables

F connectors F703 and hex. .360” connectors RG6 and RG7

MT04 Mounting tool

Suitable for securely fixing any F male connector to drop cables.

COT05 Multi-purpose compression tool with interchangeable insertions LUB01 Cable pulling lubricant

High-performance lubricant suitable for any type of cable to be run through conduits, ducts and pipes; reduces pulling strength, is water-based, clean and harmless to users; it is stable at temperatures up to 82°C (180°F) and freezes at - 5°C (23°F).

See the Cross Ref. Chart on page 30 to match tools to cables 26

C O A X IAL C A B L E S

for cables suitable for such as for cables suitable for such as

RG6 BNC, F and IEC connectors BNCC703, FC703 and both IECFC703 and IECMC703 RG59 BNC and F connectors BNCC501 and FC501

CRT05 (hex. .324” and .475”) Crimping tool suitable to like for cables

F connectors F703 and F163 RG6 and RG11

See the Cross Ref. Chart on page 30 to match tools and connectors to cables S IN C E 1 9 6 8

27

Connectors

Connectors

F COMPRESSION FC501SL

FC703SL

news FCPO5.1C FCPO4.7C FCPO3 9C

PUSH-ON WATERPROOF NO TOOL

F CRIMP

TWIST-ON

ADAPTERS

FITTINGS

HARD LINE Connectors

F41SL F501SL F70SL

FA125

F81-HQ

C75-5L

FM Series

F125A F703SL

FA17

DR01

CCFM75GI

Bolt, nut and washer for F81-HQ

75 Ohm Terminator

IEC14M Series

news FR703SL

FA501 FA70 FA703

FM-FF90

TV2VS

NM Series

news F90SL

FA17/73

news MM-F703SL

SAT2VS

3,5/12”M Series

Fast Insertion

75 Ohm Terminator

TV 2-Way Splitter

FC11

SAT 2-Way Splitter

news FC11QM

Quick Mount

F163

news MM-FR703SL

5/8”MU Series

Fast Insertion

BNC COMPRESSION BNCC501SL

BNCC703SL HARD LINE Adapters SP-32

IEC COMPRESSION IECFC703SL

Splice Connector

news C-BOX Display Box for Connector Jars

IECMC703SL Splice Reducers

SR01-13 SR01-32 SR01-46 SR21-44

news

Self Install – No Tool

IECM SI 5.1

IECF SI 5.1

See the Cross Ref. Chart on page 30 to match cables to connectors.

28

C O A X IAL C A B L E S

S IN C E 1 9 6 8

29

Cross Reference Charts

US versus CAVEL cables

TOOLS AND CONNECTORS FOR INDOOR INSTALLATION

COMPRESSION TOOLS and CONNECTORS for OUTDOOR INSTALLATION

CABLE

STRIPPER F F TWIST-ON CRIMP

F CRIMP TOOL

F PUSH-ON F COMPRESSION

F TOOL

BNC

BNC TOOL

11/48LO PIPE 11/50FC 17/73FC

(FC02) (FC02) CS17 CS17VP CS00

I E C F&M-

F125A F125A F163

CRT 04 CRT 04 CRT 05

-

FC703 FC703 FC11

COT 02-05 COT 02-05 COT 02

BNCC703 BNCC703 -

COT 04-05 COT 04-05 -

with Tool -C703; -COT05 -C703; -COT05 -

F703

CRT 03-04-05

FCPO5.1C

FC703

COT 02-05

BNCC703

COT 04-05

-C703; -COT05 -SI 5.1

F703

CRT 03-04-05

FCPO5.1C

FC703

COT 02-05

BNCC703

COT 04-05

-C703; -COT05 -SI 5.1

F501 F163 F41 F703 F703 F703 F125A F163 F163 F70 F501 F501

CRT 03-04-05 CRT 05 CRT 03 CRT 03-04-05 CRT 03-04-05 CRT 03-04-05 CRT 03-04-05 CRT 05 CRT 05 CRT 03-04-05 CRT 03-04-05 CRT 03-04-05

FCPO5.1C FCPO5.1C FCPO5.1C FCPO3.9C FCPO3.9C

FC501 FC11 FC703 FC703 FC703 FC11 FC11 FC501 FC501

COT 02-05 COT 02 COT 02-05 COT 02-05 COT 02-05 COT 02 COT 02 COT 02-05 COT 02-05

BNCC501 BNCC703 BNCC703 BNCC703 BNCC501 BNCC501

COT 04-05 COT 04-05 COT 04-05 COT 04-05 COT 04-05 COT 04-05

-C703; -COT05 -C703; -COT05 -C703; -COT05 -

2x 5x 9x 17VAtC

CS00

2x 5x 9x DG80 CATV11 -AP CW41S DG113 - C DG113PEM DG113ZH DG125 DG163 DG163ZH DG70 - C DG80 - C DG80ZH H6091ZHB (RP913) KF114 -N -MA QF100BL RG11FC RG58C/U RG59B/U RP61B RP913B SAT50M -MN SAT50M DF2N SAT501 -N SAT501 AWG SAT703-2G SAT703B -N SAT703ZH SAT752F TS11J TS61L TS703J VS80 -205 -210

CS00 CS17 CS41 CS00 CS00 CS00 (FC02) CS17 CS17 CS70 CS00 CS00 CS00

FA703

F703

CRT 03-04-05

FCPO5.1C

FC703

COT 02-05

BNCC703

COT 04-05

-C703; -COT05 -SI 5.1

CS00 CS00 CS17 CS00 CS03J CS00 CS00 CS00 CS00 CS00 CS00 (FC02) CS00 CS00 CS00 CS17 CS03J CS03J CS00

FA703 FA703 FA17/73 FA703 FA703 FA703 FA703 FA501 FA501 FA125 FA703 FA703 FA703 FA17/73 FA703 FA703 FA501

F703 F703 F163 F703 F703 F703 F703 F501 F501 F125A F703 F703 F703 F163 F703 F703 F501

CRT 03-04-05 CRT 03-04-05 CRT 05 CRT 03-04-05 CRT 03-04-05 CRT 03-04-05 CRT 03-04-05 CRT 03-04-05 CRT 03-04-05 CRT 04 CRT 03-04-05 CRT 03-04-05 CRT 03-04-05 CRT 05 CRT 03-04-05 CRT 03-04-05 CRT 03-04-05

FCPO5.1C FCPO5.1C -

FC703 FC703 FC11 FC703 FC703 FC703 FC703 FC501 FC501 FC703 FC703 FC703 FC703 FC11 FC703 FC703 FC501

COT 02-05 COT 02-05 COT 02 COT 02-05 COT 02-05 COT 02-05 COT 02-05 COT 02-05 COT 02-05 COT 02-05 COT 02-05 COT 02-05 COT 02-05 COT 02 COT 02-05 COT 02-05 COT 02-05

BNCC703 BNCC703 -

COT 04-05 COT 04-05 -

-C703; -COT05 -SI 5.1 -C703; -COT05 -SI 5.1 -

BNCC703 BNCC703 BNCC703 BNCC703 BNCC501 BNCC501 BNCC703 BNCC703 BNCC703 BNCC703 BNCC703 BNCC703 BNCC501

COT 04-05 COT 04-05 COT 04-05 COT 04-05 COT 04-05 COT 04-05 COT 04-05 COT 04-05 COT 04-05 COT 04-05 COT 04-05 COT 04-05 COT 04-05

-C703; -COT05 -C703; -COT05 -C703; -COT05 -C703; -COT05 -C703; -COT05 -C703; -COT05 -C703; -COT05 -C703; -COT05 -C703; -COT05 -C703; -COT05 -

17PAtC

FCPO5.1C FCPO5.1C FCPO5.1C FCPO5.1C FCPO3.9C FCPO3.9C FCPO5.1C FCPO5.1C FCPO5.1C FCPO5.1C FCPO5.1C FCPO3.9C

TOOLS AND HARD-LINE CONNECTORS FOR OUTDOOR AND UNDERGROUND INSTALLATION CABLE 11/50FC 17/73FC 22/99FC -AP 22/99ZH 27/115FC -AP 34/145FC -AP DG125 CATV11 -AP DG163 DG163ZH RG11FC TS11J TS22/99J TS27/115J

STRIPPER CS17 CS22 CS22 CS27 CS34 CS17 CS17 CS17 CS17 CS17 CS22 CS27

F FM-21 FM-32 FM-13 FM-13 FM-44 FM-46 FM-21 FM-32 FM-32 FM-32 FM-32 FM-32 FM-13 FM-44

from DG163 TS11J CATV11 RG11 17/73 11/50FC 11/50FC

30

No Tool -SI 5.1 -SI 5.1 -

FA125 FA125 FA17/73 FA703 FA17 FA703 FA17 FA501 FA17/73 FA703 FA703 FA703 FA17/73 FA17/73 FA70 FA501 FA501

IEC IEC14M-32 IEC14M-13 IEC14M-13 IEC14M-44 IEC14M-46 IEC14M-32 IEC14M-32 IEC14M-32 IEC14M-32 IEC14M-32 IEC14M-13 IEC14M-44 ADAPTERS SP-32 SR01-13 SR01-32

11/50FC

SR01-46

11/50FC any drop F connector any drop F connector any drop F connector any drop F connector

SR21-44 F81-HQ +DR01 FM-FF90 MM-F703 MM-FR703

C O A X IAL C A B L E S

N NM-32 NM-32 NM-32 NM-32 NM-32 NM-32 -

5/8” 5/8MU-32 5/8MU-13 5/8MU-13 5/8MU-44 5/8MU-46 5/8MU-32 5/8MU-32 5/8MU-32 5/8MU-32 5/8MU-32 5/8MU-13 5/8MU-44

to DG163 TS11J CATV11 RG11 17/73 any 22/99 DG163 TS11J CATV11 RG11 17/73 any 34/145 34/145 any 27/115 any drop F connector any drop F connector any drop F connector any drop F connector

3,5/12” 3,5/12M-32 3,5/12M-13 3,5/12M-13 3,5/12M-44 3,5/12M-46 3,5/12M-32 3,5/12M-32 3,5/12M-32 3,5/12M-32 3,5/12M-32 3,5/12M-13 3,5/12M-44

-SI 5.1 -SI 5.1 -SI 5.1 -

-SI 5.1 -SI 5.1 -SI 5.1 -SI 5.1 -SI 5.1 -SI 5.1 -SI 5.1 -SI 5.1 -SI 5.1 -SI 5.1 -

Drop and Distribution Cables Main Features US CAVEL cable type cable type mini RG59 CCS wire inner conductor CW41S RG59 drop Class B cable, overall dia. 5,0 mm SAT501 - N SAT501 provided with 1 twisted pair AWG24 SAT501 AWG multipair DG80 for Multiswitch Distribution Systems 2x 5x 9x DG80 drop Class A cable, overall dia.5,0 mm DG80 - C DG80 provided with LSZH outer sheath DG80ZH RG6 cheap RG6 Class B cable SAT50M - MN SAT50M provided with 1 twisted pair AWG24 and 2 leads 0,5 sq.mm SAT50M DF2N Cu+Cu screen Class A drop under CAI.uk benchmark QF100BL Class A+ drop suitable to 5,1 size connectors RP61B Triple Shield drop, Class A++ Screening Attenuation TS61L RG6+ (1) standard Class B drop cable SAT703B - N SAT703 provided with LSZH outer sheath SAT703ZH outdoor SAT703 with double PE/PVC outer sheath SAT703-2G outdoor SAT703 provided with soft black PE outer sheath 17PAtC 2x 5x 9x17VAtC multipair SAT703 for Multiswith Distribution Systems KF114 - N - MA Cu+Cu Class B drop cable undergroung CATV drop provided with loose PE tube, for FO purpose 11/48LO PIPE outdoor and underground drop Petrol Jelly filled 11/50FC Class A drop cable DG113 - C DG113 with messenger for hung-up installation DG113PEM DG113 provided with LSZH outer sheath DG113ZH Cu+Cu screen, Class A+ drop cable SAT752F Double Shield drop, Class A++ Screening Attenuation (SA) RP913B Triple Shield drop, Class A++ SA TS703J RG7 Class A drop, for outdoor installation DG125 RG11 Class B distribution cable for outdoor installation CATV11 CATV11 with messenger rope for hung-up installation CATV11AP Class A distribution cable with CCS inner conductor and Al wires braid RG11FC Cu+Cu double shield Class A underground distribution cable 17/73FC Class A+ distribution cable DG163 DG163 provided with LSZH outer sheath DG163ZH Triple Shield Class A++ distribution cable TS11J Trunk Cables US (2) Main Features (3) CAVEL cable type cable type .320” Cu/Pet film foil+Cu braid screen, Class A cable 22/99FC .412” 22/99FC with messenger rope for hung-up installation 22/99AP 22/99 provided with LSZH outer sheath 22/99ZH Triple Shield Class A++ trunk cable TS22/99J .500” Cu/Pet film foil+Cu braid screen, Class A cable 27/115FC 27/115FC with messenger rope for hung-up installation 27/115AP Triple Shield Class A++ trunk cable TS27/115J .540” .565” Cu/Pet film foil+Cu braid screen, Class A cable 34/145FC .625” 34/145FC with messenger rope for hung-up installation 34/145AP

TEMPERATURES Minimum Installation Temperature Any Cable - 5°C Operating Temperatures PVC Sheath - 30° to 80°C LSZH Sheath - 25° to 80°C PE Sheath - 40° to 80°C LIMIT OF RESPONSIBILITY Every care has been taken to ensure that the information contained in this publication is correct. No legal responsibility can be accepted for any inaccuracy. The company reserves the right to alter or modify the information contained herein at any time.

The coaxial cables illustrated in this catalogue must be used solely for the purposes for which they were expressly designed, which is the reception and distribution of audio, video and data signals.

Any other use is deemed to be inappropriate and our approval should be sought for alternative applications. The manufacturer and the seller decline all responsibility for any problems that may occur due to improper, incorrect and unreasonable use.

look at page 6 8 19 12 6 10 8 19 6 7 4 8 10 8 8 12 8 19 14 7 16 10 7 4 4 6 14 16 14 14 7 10 4

Notes

look at page 14 16 10 4 15 16 4 15 17

Notes

(1) Among typical US cables range exists no RG6+ reference. We introduce it just to justify our most standard range of coaxial cables - as well as of any other European manufacturer - whose inner conductor size has dia.1,13 mm.

With the desinence “+” we stress that this inner conductor size performs a better attenuation value than an inner conductor of dia.

1,00 mm only.

(2) The US cables’ scheme by left side is based on sizes given in inches.

(3) Typically, all US trunk cables are rigid, due to the Al tube as outer shield, while all CAVEL trunk cables are flexible, due to the film foil + braid outer screen construction.

LEGEND Al

Aluminium

FeZn

Zinc Plated Steel

AP

Al-Polyester

LSZH

Low Smoke Zero Halogen

APA

Al-Polyester-Al

N

Newton (0.1 kg approx)

APAS

Al-Polyester-Al-Surline(glue)

na

not applicable

APJ

Al-Polyester-“J folded”

PE

Polyethylene

APS

Al-Polyester-Surline(glue)

PEG

Gas Injected Physical Foam PE

AWG

American Wires Gauge

Pet

Polyester

CAI

Confederation Aerial Industries (UK)

PJ

Petrol Jelly Filling

CCS

Copper Clad Steel

PVC

Poly-vinyl-chloride

Cu

Copper

PVCII

Non-migrating PVC

Cu/Pet

Copper-Polyester

SA

Screening Attenuation

CuSn

Tinned Copper

TI

Transfer Impedance

FeCu

Copper Clad Steel (CCS) S IN C E 1 9 6 8

31

MALPENSA

MONZA RHO A4

MILANO

LINATE

NOVARA ABBIATEGRASSO

MELEGNANO

VIGEVANO VILLAMAGGIORE

GROPELLO CAIROLI

CREMA LODI

A1

PAVIA CASAL PUSTERLENGO

CASALE MONFERRATO BELGIOIOSO LOMELLO MEDE TORREBERETTI

A7

04/2012

CAVA MANARA BRESSANA

A21 VOGHERA

CERTIFIED COMPANY UNI EN ISO 9001-2008 CERT. NR. 9125 - ICON

ITALIANA CONDUTTORI Srl Viale Zanotti, 90 - 27027 Gropello Cairoli (Pavia) Italy Tel. +39 0382 815150 - Fax +39 0382 814970 Longitude 09° 00’ 35” E - Latitude 45° 10’ 39” N www.cavel.com cavel@cavel.it